| Age | Commit message (Collapse) | Author |
|---|
|
When a switch event, such as tablet mode/laptop mode or docked/undocked,
wakes a device make sure that the value of the swich is reported.
Without when a device is put in tablet mode from laptop mode when it is
suspended or vice versa the device will wake up but mode will be
incorrect.
Tested by suspending a device in laptop mode and putting it in tablet
mode, the device resumes and is in tablet mode. When suspending the
device in tablet mode and putting it in laptop mode the device resumes
and is in laptop mode.
Signed-off-by: Mathew King <mathewk@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
asus_nb_wmi
Commit 78f3ac76d9e5 ("platform/x86: asus-wmi: Tell the EC the OS will
handle the display off hotkey") causes the backlight to be permanently off
on various EeePC laptop models using the eeepc-wmi driver (Asus EeePC
1015BX, Asus EeePC 1025C).
The asus_wmi_set_devstate(ASUS_WMI_DEVID_BACKLIGHT, 2, NULL) call added
by that commit is made conditional in this commit and only enabled in
the quirk_entry structs in the asus-nb-wmi driver fixing the broken
display / backlight on various EeePC laptop models.
Cc: João Paulo Rechi Vita <jprvita@endlessm.com>
Fixes: 78f3ac76d9e5 ("platform/x86: asus-wmi: Tell the EC the OS will handle the display off hotkey")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Booting with kernel parameter "rdt=cmt,mbmtotal,memlocal,l3cat,mba" and
executing "mount -t resctrl resctrl -o mba_MBps /sys/fs/resctrl" results in
a NULL pointer dereference on systems which do not have local MBM support
enabled..
BUG: kernel NULL pointer dereference, address: 0000000000000020
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 0 PID: 722 Comm: kworker/0:3 Not tainted 5.2.0-0.rc3.git0.1.el7_UNSUPPORTED.x86_64 #2
Workqueue: events mbm_handle_overflow
RIP: 0010:mbm_handle_overflow+0x150/0x2b0
Only enter the bandwith update loop if the system has local MBM enabled.
Fixes: de73f38f7680 ("x86/intel_rdt/mba_sc: Feedback loop to dynamically update mem bandwidth")
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190610171544.13474-1-prarit@redhat.com
|
|
When a new control group is created __init_one_rdt_domain() walks all
the other closids to calculate the sets of used and unused bits.
If it discovers a pseudo_locksetup group, it breaks out of the loop. This
means any later closid doesn't get its used bits added to used_b. These
bits will then get set in unused_b, and added to the new control group's
configuration, even if they were marked as exclusive for a later closid.
When encountering a pseudo_locksetup group, we should continue. This is
because "a resource group enters 'pseudo-locked' mode after the schemata is
written while the resource group is in 'pseudo-locksetup' mode." When we
find a pseudo_locksetup group, its configuration is expected to be
overwritten, we can skip it.
Fixes: dfe9674b04ff6 ("x86/intel_rdt: Enable entering of pseudo-locksetup mode")
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H Peter Avin <hpa@zytor.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20190603172531.178830-1-james.morse@arm.com
|
|
Acquiring drm_client_dev.modeset_mutex after the locks in drm_fb_helper.dev
creates a deadlock with drm_setup_crtcs() as shown below:
[ 4.959319] fbcon: radeondrmfb (fb0) is primary device
[ 4.993952] Console: switching to colour frame buffer device 240x67
[ 4.994040]
[ 4.994041] ======================================================
[ 4.994041] WARNING: possible circular locking dependency detected
[ 4.994042] 5.2.0-rc4-1-default+ #39 Tainted: G E
[ 4.994043] ------------------------------------------------------
[ 4.994043] systemd-udevd/369 is trying to acquire lock:
[ 4.994044] 00000000fb622acb (&client->modeset_mutex){+.+.}, at: drm_fb_helper_pan_display+0x103/0x1f0 [drm_kms_helper]
[ 4.994055]
[ 4.994055] but task is already holding lock:
[ 4.994055] 0000000028767ae4 (crtc_ww_class_mutex){+.+.}, at: drm_modeset_lock+0x42/0xf0 [drm]
[ 4.994072]
[ 4.994072] which lock already depends on the new lock.
[ 4.994072]
[ 4.994072]
[ 4.994072] the existing dependency chain (in reverse order) is:
[ 4.994073]
[ 4.994073] -> #3 (crtc_ww_class_mutex){+.+.}:
[ 4.994076] lock_acquire+0x9e/0x170
[ 4.994079] __ww_mutex_lock.constprop.18+0x97/0xf40
[ 4.994080] ww_mutex_lock+0x30/0x90
[ 4.994091] drm_modeset_lock+0x42/0xf0 [drm]
[ 4.994102] drm_modeset_lock_all_ctx+0x1f/0xe0 [drm]
[ 4.994113] drm_modeset_lock_all+0x5e/0x1a0 [drm]
[ 4.994163] intel_modeset_init+0x60b/0xda0 [i915]
..
[ 4.994253]
[ 4.994253] -> #2 (crtc_ww_class_acquire){+.+.}:
[ 4.994255] lock_acquire+0x9e/0x170
[ 4.994270] drm_modeset_acquire_init+0xcc/0x100 [drm]
[ 4.994280] drm_modeset_lock_all+0x44/0x1a0 [drm]
[ 4.994320] intel_modeset_init+0x60b/0xda0 [i915]
..
[ 4.994403]
[ 4.994403] -> #1 (&dev->mode_config.mutex){+.+.}:
[ 4.994405] lock_acquire+0x9e/0x170
[ 4.994408] __mutex_lock+0x62/0x8c0
[ 4.994413] drm_setup_crtcs+0x17c/0xc50 [drm_kms_helper]
[ 4.994418] __drm_fb_helper_initial_config_and_unlock+0x34/0x530 [drm_kms_helper]
[ 4.994450] radeon_fbdev_init+0x110/0x130 [radeon]
..
[ 4.994535]
[ 4.994535] -> #0 (&client->modeset_mutex){+.+.}:
[ 4.994537] __lock_acquire+0xa85/0xe90
[ 4.994538] lock_acquire+0x9e/0x170
[ 4.994540] __mutex_lock+0x62/0x8c0
[ 4.994545] drm_fb_helper_pan_display+0x103/0x1f0 [drm_kms_helper]
[ 4.994547] fb_pan_display+0x92/0x120
[ 4.994549] bit_update_start+0x1a/0x40
[ 4.994550] fbcon_switch+0x392/0x580
[ 4.994552] redraw_screen+0x12c/0x220
[ 4.994553] do_bind_con_driver.cold.30+0xe1/0x10d
[ 4.994554] do_take_over_console+0x113/0x190
[ 4.994555] do_fbcon_takeover+0x58/0xb0
[ 4.994557] notifier_call_chain+0x47/0x70
[ 4.994558] blocking_notifier_call_chain+0x44/0x60
[ 4.994559] register_framebuffer+0x231/0x310
[ 4.994564] __drm_fb_helper_initial_config_and_unlock+0x2fd/0x530 [drm_kms_helper]
[ 4.994590] radeon_fbdev_init+0x110/0x130 [radeon]
..
This problem was introduced in
d81294afe drm/fb-helper: Remove drm_fb_helper_crtc
Reversing the lock ordering in pan_display_legacy() fixes the issue.
Fixes: d81294afeecd ("drm/fb-helper: Remove drm_fb_helper_crtc")
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611115716.7052-1-tzimmermann@suse.de
|
|
Apparently, some Qualcomm arm64 platforms which appear to expose their
SMMU global register space are still, in fact, using a hypervisor to
mediate it by trapping and emulating register accesses. Sadly, some
deployed versions of said trapping code have bugs wherein they go
horribly wrong for stores using r31 (i.e. XZR/WZR) as the source
register.
While this can be mitigated for GCC today by tweaking the constraints
for the implementation of writel_relaxed(), to avoid any potential
arms race with future compilers more aggressively optimising register
allocation, the simple way is to just remove all the problematic
constant zeros. For the write-only TLB operations, the actual value is
irrelevant anyway and any old nearby variable will provide a suitable
GPR to encode. The one point at which we really do need a zero to clear
a context bank happens before any of the TLB maintenance where crashes
have been reported, so is apparently not a problem... :/
Reported-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
Tested-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Gen10 added an additional NOA_WRITE register (high bits) and we forgot
to whitelist it for userspace.
Fixes: 95690a02fb5d96 ("drm/i915/perf: enable perf support on CNL")
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190601225845.12600-1-lionel.g.landwerlin@intel.com
(cherry picked from commit bf210f6c9e6fd8dc0d154ad18f741f20e64a3fce)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Our SDVO audio support is pretty bogus. We can't push audio over the
SDVO bus, so trying to enable audio in the SDVO control register doesn't
do anything. In fact it looks like the SDVO encoder will always mix in
the audio coming over HDA, and there's no (at least documented) way to
disable that from our side. So HDMI audio does work currently on gen4
but only by luck really. On gen3 it got broken by the referenced commit.
And what has always been missing on every platform is the ELD.
To pass the ELD to the audio driver we need to write it to magic buffer
in the SDVO encoder hardware which then gets pulled out via HDA in the
other end. Ie. pretty much the same thing we had for native HDMI before
we started to just pass the ELD between the drivers. This sort of
explains why we even have that silly hardware buffer with native HDMI.
$ cat /proc/asound/card0/eld#1.0
-monitor_present 0
-eld_valid 0
+monitor_present 1
+eld_valid 1
+monitor_name LG TV
+connection_type HDMI
+...
This also fixes our state readout since we can now query the SDVO
encoder about the state of the "ELD valid" and "presence detect"
bits. As mentioned those don't actually control whether audio
gets sent over the HDMI cable, but it's the best we can do. And with
the state checker appeased we can re-enable HDMI audio for gen3.
Cc: stable@vger.kernel.org
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: zardam@gmail.com
Tested-by: zardam@gmail.com
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108976
Fixes: de44e256b92c ("drm/i915/sdvo: Shut up state checker with hdmi cards on gen3")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190409144054.24561-3-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit dc49a56bd43bb04982e64b44436831da801d0237)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
We forgot to set .has_alpha=true for the A+CCS formats when the code
started to consult .has_alpha. This manifests as A+CCS being treated
as X+CCS which means no per-pixel alpha blending. Fix the format
list appropriately.
Cc: stable@vger.kernel.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Heinrich Fink <heinrich.fink@daqri.com>
Reported-by: Heinrich Fink <heinrich.fink@daqri.com>
Tested-by: Heinrich Fink <heinrich.fink@daqri.com>
Fixes: b20815255693 ("drm/i915: Add plane alpha blending support, v2.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190603142500.25680-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
(cherry picked from commit 38f300410f3e15b6fec76c8d8baed7111b5ea4e4)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
While loading the DMC firmware we were double checking the headers made
sense, but in no place we checked that we were actually reading memory
we were supposed to. This could be wrong in case the firmware file is
truncated or malformed.
Before this patch:
# ls -l /lib/firmware/i915/icl_dmc_ver1_07.bin
-rw-r--r-- 1 root root 25716 Feb 1 12:26 icl_dmc_ver1_07.bin
# truncate -s 25700 /lib/firmware/i915/icl_dmc_ver1_07.bin
# modprobe i915
# dmesg| grep -i dmc
[drm:intel_csr_ucode_init [i915]] Loading i915/icl_dmc_ver1_07.bin
[drm] Finished loading DMC firmware i915/icl_dmc_ver1_07.bin (v1.7)
i.e. it loads random data. Now it fails like below:
[drm:intel_csr_ucode_init [i915]] Loading i915/icl_dmc_ver1_07.bin
[drm:csr_load_work_fn [i915]] *ERROR* Truncated DMC firmware, rejecting.
i915 0000:00:02.0: Failed to load DMC firmware i915/icl_dmc_ver1_07.bin. Disabling runtime power management.
i915 0000:00:02.0: DMC firmware homepage: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915
Before reading any part of the firmware file, validate the input first.
Fixes: eb805623d8b1 ("drm/i915/skl: Add support to load SKL CSR firmware.")
Cc: stable@vger.kernel.org
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605235535.17791-1-lucas.demarchi@intel.com
(cherry picked from commit bc7b488b1d1c71dc4c5182206911127bc6c410d6)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Prior to this commit we fail to init the DSI panel on the GPD MicroPC:
https://www.indiegogo.com/projects/gpd-micropc-6-inch-handheld-industry-laptop#/
The problem is intel_dsi_vbt_init() failing with the following error:
*ERROR* Burst mode freq is less than computed
The pclk in the VBT panel modeline is 70000, together with 24 bpp and
4 lines this results in a bitrate value of 70000 * 24 / 4 = 420000.
But the target_burst_mode_freq in the VBT is 418000.
This commit works around this problem by adding an intel_fuzzy_clock_check
when target_burst_mode_freq < bitrate and setting target_burst_mode_freq to
bitrate when that checks succeeds, fixing the panel not working.
Cc: stable@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524174028.21659-2-hdegoede@redhat.com
(cherry picked from commit 2c1c55252647abd989b94f725b190c700312d053)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
These new physical operations are helpful to power_on/off the dsi
wrapper. If the dsi wrapper is powered in video mode, the display
controller (ltdc) register access will hang when DSI fifos are full.
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1558952499-15418-3-git-send-email-yannick.fertre@st.com
|
|
Add power on & off optional physical operation functions, helpful to
program specific registers of the DSI physical part.
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1558952499-15418-2-git-send-email-yannick.fertre@st.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull ptrace fixes from Eric Biederman:
"This is just two very minor fixes:
- prevent ptrace from reading unitialized kernel memory found twice
by syzkaller
- restore a missing smp_rmb in ptrace_may_access and add comment tp
it so it is not removed by accident again.
Apologies for being a little slow about getting this to you, I am
still figuring out how to develop with a little baby in the house"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
ptrace: restore smp_rmb() in __ptrace_may_access()
signal/ptrace: Don't leak unitialized kernel memory with PTRACE_PEEK_SIGINFO
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb
Pull swiotlb fix from Konrad Rzeszutek Wilk:
"One tiny fix for ARM64 where we could allocate the SWIOTLB twice"
* 'stable/for-linus-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
xen/swiotlb: don't initialize swiotlb twice on arm64
|
|
Pull VFIO fixes from Alex Williamson:
"Fix mdev device create/remove paths to provide initialized device for
parent driver create callback and correct ordering of device removal
from bus prior to initiating removal by parent.
Also resolve races between parent removal and device create/remove
paths (all from Parav Pandit)"
* tag 'vfio-v5.2-rc5' of git://github.com/awilliam/linux-vfio:
vfio/mdev: Synchronize device create/remove with parent removal
vfio/mdev: Avoid creating sysfs remove file on stale device removal
vfio/mdev: Improve the create/remove sequence
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"One regression fix to TRIM ioctl.
The range cannot be used as its meaning can be confusing regarding
physical and logical addresses. This confusion in code led to
potential corruptions when the range overlapped data.
The original patch made it to several stable kernels and was promptly
reverted, the version for master branch is different due to additional
changes but the change is effectively the same"
* tag 'for-5.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: Always trim all unallocated space in btrfs_trim_free_extents
|
|
These strings may come from untrusted sources (e.g. file xattrs) so they
need to be properly escaped.
Reproducer:
# setenforce 0
# touch /tmp/test
# setfattr -n security.selinux -v 'kuřecí řízek' /tmp/test
# runcon system_u:system_r:sshd_t:s0 cat /tmp/test
(look at the generated AVCs)
Actual result:
type=AVC [...] trawcon=kuřecí řízek
Expected result:
type=AVC [...] trawcon=6B75C5996563C3AD20C599C3AD7A656B
Fixes: fede148324c3 ("selinux: log invalid contexts in AVCs")
Cc: stable@vger.kernel.org # v5.1+
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Restore the read memory barrier in __ptrace_may_access() that was deleted
a couple years ago. Also add comments on this barrier and the one it pairs
with to explain why they're there (as far as I understand).
Fixes: bfedb589252c ("mm: Add a user_ns owner to mm_struct and fix ptrace permission checks")
Cc: stable@vger.kernel.org
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
Like was done for ICL, let's convert the voltage level lookup to use
frequency ranges rather than individual frequencies. For deciding the
voltage, the individual value doesn't really matter.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610214847.9865-1-lucas.demarchi@intel.com
|
|
Like was done for ICL, let's convert the voltage level lookup to use
frequency ranges rather than individual frequencies. For deciding the
voltage, the individual value doesn't really matter.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610214834.9789-1-lucas.demarchi@intel.com
|
|
Spec shows voltage level 0 as 307.2, 312, or lower and suggests to use
range checks. Prepare for having other frequencies in these ranges by
not comparing the exact frequency.
v2: invert checks by comparing biggest cdclk first (suggested by Ville)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610214819.9703-1-lucas.demarchi@intel.com
|
|
[What]
readptr read always returns zero, since most likely
these blocks are either power or clock gated.
[How]
fetch rptr after amdgpu_ring_alloc() which informs
the power management code that the block is about to be
used and hence the gating is turned off.
Signed-off-by: Louis Li <Ching-shih.Li@amd.com>
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
We can't have devices that are not completely initialized in kfd topology.
Otherwise it is a race condition when user access not completely
initialized device. This also addresses a kfd_topology_add_device accessing
NULL dqm pointer issue.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Move HSA_CAP_ATS_PRESENT initialization logic from kfd iommu codes to
kfd topology codes. This removes kfd_iommu_device_init's dependency
on kfd_topology_add_device. Also remove duplicate code setting the
same.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
SDMA queue allocation requires the dqm lock at it modify
the global dqm members. Move up the dqm_lock so sdma
queue allocation is enclosed in the critical section. Move
mqd allocation out of critical section to avoid circular
lock dependency.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The idea to break the circular lock dependency is to move allocate_mqd
out of dqm lock protection. See callstack #1 below.
[ 59.510149] [drm] Initialized amdgpu 3.30.0 20150101 for 0000:04:00.0 on minor 0
[ 513.604034] ======================================================
[ 513.604205] WARNING: possible circular locking dependency detected
[ 513.604375] 4.18.0-kfd-root #2 Tainted: G W
[ 513.604530] ------------------------------------------------------
[ 513.604699] kswapd0/611 is trying to acquire lock:
[ 513.604840] 00000000d254022e (&dqm->lock_hidden){+.+.}, at: evict_process_queues_nocpsch+0x26/0x140 [amdgpu]
[ 513.605150]
but task is already holding lock:
[ 513.605307] 00000000961547fc (&anon_vma->rwsem){++++}, at: page_lock_anon_vma_read+0xe4/0x250
[ 513.605540]
which lock already depends on the new lock.
[ 513.605747]
the existing dependency chain (in reverse order) is:
[ 513.605944]
-> #4 (&anon_vma->rwsem){++++}:
[ 513.606106] __vma_adjust+0x147/0x7f0
[ 513.606231] __split_vma+0x179/0x190
[ 513.606353] mprotect_fixup+0x217/0x260
[ 513.606553] do_mprotect_pkey+0x211/0x380
[ 513.606752] __x64_sys_mprotect+0x1b/0x20
[ 513.606954] do_syscall_64+0x50/0x1a0
[ 513.607149] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 513.607380]
-> #3 (&mapping->i_mmap_rwsem){++++}:
[ 513.607678] rmap_walk_file+0x1f0/0x280
[ 513.607887] page_referenced+0xdd/0x180
[ 513.608081] shrink_page_list+0x853/0xcb0
[ 513.608279] shrink_inactive_list+0x33b/0x700
[ 513.608483] shrink_node_memcg+0x37a/0x7f0
[ 513.608682] shrink_node+0xd8/0x490
[ 513.608869] balance_pgdat+0x18b/0x3b0
[ 513.609062] kswapd+0x203/0x5c0
[ 513.609241] kthread+0x100/0x140
[ 513.609420] ret_from_fork+0x24/0x30
[ 513.609607]
-> #2 (fs_reclaim){+.+.}:
[ 513.609883] kmem_cache_alloc_trace+0x34/0x2e0
[ 513.610093] reservation_object_reserve_shared+0x139/0x300
[ 513.610326] ttm_bo_init_reserved+0x291/0x480 [ttm]
[ 513.610567] amdgpu_bo_do_create+0x1d2/0x650 [amdgpu]
[ 513.610811] amdgpu_bo_create+0x40/0x1f0 [amdgpu]
[ 513.611041] amdgpu_bo_create_reserved+0x249/0x2d0 [amdgpu]
[ 513.611290] amdgpu_bo_create_kernel+0x12/0x70 [amdgpu]
[ 513.611584] amdgpu_ttm_init+0x2cb/0x560 [amdgpu]
[ 513.611823] gmc_v9_0_sw_init+0x400/0x750 [amdgpu]
[ 513.612491] amdgpu_device_init+0x14eb/0x1990 [amdgpu]
[ 513.612730] amdgpu_driver_load_kms+0x78/0x290 [amdgpu]
[ 513.612958] drm_dev_register+0x111/0x1a0
[ 513.613171] amdgpu_pci_probe+0x11c/0x1e0 [amdgpu]
[ 513.613389] local_pci_probe+0x3f/0x90
[ 513.613581] pci_device_probe+0x102/0x1c0
[ 513.613779] driver_probe_device+0x2a7/0x480
[ 513.613984] __driver_attach+0x10a/0x110
[ 513.614179] bus_for_each_dev+0x67/0xc0
[ 513.614372] bus_add_driver+0x1eb/0x260
[ 513.614565] driver_register+0x5b/0xe0
[ 513.614756] do_one_initcall+0xac/0x357
[ 513.614952] do_init_module+0x5b/0x213
[ 513.615145] load_module+0x2542/0x2d30
[ 513.615337] __do_sys_finit_module+0xd2/0x100
[ 513.615541] do_syscall_64+0x50/0x1a0
[ 513.615731] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 513.615963]
-> #1 (reservation_ww_class_mutex){+.+.}:
[ 513.616293] amdgpu_amdkfd_alloc_gtt_mem+0xcf/0x2c0 [amdgpu]
[ 513.616554] init_mqd+0x223/0x260 [amdgpu]
[ 513.616779] create_queue_nocpsch+0x4d9/0x600 [amdgpu]
[ 513.617031] pqm_create_queue+0x37c/0x520 [amdgpu]
[ 513.617270] kfd_ioctl_create_queue+0x2f9/0x650 [amdgpu]
[ 513.617522] kfd_ioctl+0x202/0x350 [amdgpu]
[ 513.617724] do_vfs_ioctl+0x9f/0x6c0
[ 513.617914] ksys_ioctl+0x66/0x70
[ 513.618095] __x64_sys_ioctl+0x16/0x20
[ 513.618286] do_syscall_64+0x50/0x1a0
[ 513.618476] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 513.618695]
-> #0 (&dqm->lock_hidden){+.+.}:
[ 513.618984] __mutex_lock+0x98/0x970
[ 513.619197] evict_process_queues_nocpsch+0x26/0x140 [amdgpu]
[ 513.619459] kfd_process_evict_queues+0x3b/0xb0 [amdgpu]
[ 513.619710] kgd2kfd_quiesce_mm+0x1c/0x40 [amdgpu]
[ 513.620103] amdgpu_amdkfd_evict_userptr+0x38/0x70 [amdgpu]
[ 513.620363] amdgpu_mn_invalidate_range_start_hsa+0xa6/0xc0 [amdgpu]
[ 513.620614] __mmu_notifier_invalidate_range_start+0x70/0xb0
[ 513.620851] try_to_unmap_one+0x7fc/0x8f0
[ 513.621049] rmap_walk_anon+0x121/0x290
[ 513.621242] try_to_unmap+0x93/0xf0
[ 513.621428] shrink_page_list+0x606/0xcb0
[ 513.621625] shrink_inactive_list+0x33b/0x700
[ 513.621835] shrink_node_memcg+0x37a/0x7f0
[ 513.622034] shrink_node+0xd8/0x490
[ 513.622219] balance_pgdat+0x18b/0x3b0
[ 513.622410] kswapd+0x203/0x5c0
[ 513.622589] kthread+0x100/0x140
[ 513.622769] ret_from_fork+0x24/0x30
[ 513.622957]
other info that might help us debug this:
[ 513.623354] Chain exists of:
&dqm->lock_hidden --> &mapping->i_mmap_rwsem --> &anon_vma->rwsem
[ 513.623900] Possible unsafe locking scenario:
[ 513.624189] CPU0 CPU1
[ 513.624397] ---- ----
[ 513.624594] lock(&anon_vma->rwsem);
[ 513.624771] lock(&mapping->i_mmap_rwsem);
[ 513.625020] lock(&anon_vma->rwsem);
[ 513.625253] lock(&dqm->lock_hidden);
[ 513.625433]
*** DEADLOCK ***
[ 513.625783] 3 locks held by kswapd0/611:
[ 513.625967] #0: 00000000f14edf84 (fs_reclaim){+.+.}, at: __fs_reclaim_acquire+0x5/0x30
[ 513.626309] #1: 00000000961547fc (&anon_vma->rwsem){++++}, at: page_lock_anon_vma_read+0xe4/0x250
[ 513.626671] #2: 0000000067b5cd12 (srcu){....}, at: __mmu_notifier_invalidate_range_start+0x5/0xb0
[ 513.627037]
stack backtrace:
[ 513.627292] CPU: 0 PID: 611 Comm: kswapd0 Tainted: G W 4.18.0-kfd-root #2
[ 513.627632] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 513.627990] Call Trace:
[ 513.628143] dump_stack+0x7c/0xbb
[ 513.628315] print_circular_bug.isra.37+0x21b/0x228
[ 513.628581] __lock_acquire+0xf7d/0x1470
[ 513.628782] ? unwind_next_frame+0x6c/0x4f0
[ 513.628974] ? lock_acquire+0xec/0x1e0
[ 513.629154] lock_acquire+0xec/0x1e0
[ 513.629357] ? evict_process_queues_nocpsch+0x26/0x140 [amdgpu]
[ 513.629587] __mutex_lock+0x98/0x970
[ 513.629790] ? evict_process_queues_nocpsch+0x26/0x140 [amdgpu]
[ 513.630047] ? evict_process_queues_nocpsch+0x26/0x140 [amdgpu]
[ 513.630309] ? evict_process_queues_nocpsch+0x26/0x140 [amdgpu]
[ 513.630562] evict_process_queues_nocpsch+0x26/0x140 [amdgpu]
[ 513.630816] kfd_process_evict_queues+0x3b/0xb0 [amdgpu]
[ 513.631057] kgd2kfd_quiesce_mm+0x1c/0x40 [amdgpu]
[ 513.631288] amdgpu_amdkfd_evict_userptr+0x38/0x70 [amdgpu]
[ 513.631536] amdgpu_mn_invalidate_range_start_hsa+0xa6/0xc0 [amdgpu]
[ 513.632076] __mmu_notifier_invalidate_range_start+0x70/0xb0
[ 513.632299] try_to_unmap_one+0x7fc/0x8f0
[ 513.632487] ? page_lock_anon_vma_read+0x68/0x250
[ 513.632690] rmap_walk_anon+0x121/0x290
[ 513.632875] try_to_unmap+0x93/0xf0
[ 513.633050] ? page_remove_rmap+0x330/0x330
[ 513.633239] ? rcu_read_unlock+0x60/0x60
[ 513.633422] ? page_get_anon_vma+0x160/0x160
[ 513.633613] shrink_page_list+0x606/0xcb0
[ 513.633800] shrink_inactive_list+0x33b/0x700
[ 513.633997] shrink_node_memcg+0x37a/0x7f0
[ 513.634186] ? shrink_node+0xd8/0x490
[ 513.634363] shrink_node+0xd8/0x490
[ 513.634537] balance_pgdat+0x18b/0x3b0
[ 513.634718] kswapd+0x203/0x5c0
[ 513.634887] ? wait_woken+0xb0/0xb0
[ 513.635062] kthread+0x100/0x140
[ 513.635231] ? balance_pgdat+0x3b0/0x3b0
[ 513.635414] ? kthread_delayed_work_timer_fn+0x80/0x80
[ 513.635626] ret_from_fork+0x24/0x30
[ 513.636042] Evicting PASID 32768 queues
[ 513.936236] Restoring PASID 32768 queues
[ 524.708912] Evicting PASID 32768 queues
[ 524.999875] Restoring PASID 32768 queues
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Introduce a new mqd allocation interface and split the original
init_mqd function into two functions: allocate_mqd and init_mqd.
Also renamed uninit_mqd to free_mqd. This is preparation work to
fix a circular lock dependency.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This is prepare work to fix a circular lock dependency.
No logic change
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Also calls load_mqd with current->mm struct. The mm
struct is used to read back user wptr of the queue.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Don't do the same for compute queues
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
HMM provides new APIs and helps in kernel 5.2-rc1 to simplify driver
path. The old hmm APIs are deprecated and will be removed in future.
Below are changes in driver:
1. Change hmm_vma_fault to hmm_range_register and hmm_range_fault which
supports range with multiple vmas, remove the multiple vmas handle path
and data structure.
2. Change hmm_vma_range_done to hmm_range_unregister.
3. Use default flags to avoid pre-fill pfn arrays.
4. Use new hmm_device_ helpers.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
On Rockchip rk3288-based Chromebooks when you do a suspend/resume
cycle:
1. You lose the ability to detect an HDMI device being plugged in.
2. If you're using the i2c bus built in to dw_hdmi then it stops
working.
Let's call the core dw-hdmi's suspend/resume functions to restore
things.
NOTE: in downstream Chrome OS (based on kernel 3.14) we used the
"late/early" versions of suspend/resume because we found that the VOP
was sometimes resuming before dw_hdmi and then calling into us before
we were fully resumed. For now I have gone back to the normal
suspend/resume because I can't reproduce the problems.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190604204207.168085-2-dianders@chromium.org
|
|
On Rockchip rk3288-based Chromebooks when you do a suspend/resume
cycle:
1. You lose the ability to detect an HDMI device being plugged in.
2. If you're using the i2c bus built in to dw_hdmi then it stops
working.
Let's add a hook to the core dw-hdmi driver so that we can call it in
dw_hdmi-rockchip in the next commit.
NOTE: the exact set of steps I've done here in resume come from
looking at the normal dw_hdmi init sequence in upstream Linux plus the
sequence that we did in downstream Chrome OS 3.14. Testing show that
it seems to work, but if an extra step is needed or something here is
not needed we could improve it.
As part of this change we'll refactor the hardware init bits of
dw-hdmi to happen all in one function and all at the same time. Since
we need to init the interrupt mutes before we request the IRQ, this
means moving the hardware init earlier in the function, but there
should be no problems with that. Also as part of this we now
unconditionally init the "i2c" parts of dw-hdmi, but again that ought
to be fine.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190604204207.168085-1-dianders@chromium.org
|
|
The "block" variable can be set by the user through debugfs, so it can
be quite large which leads to shift wrapping here. This means we report
a "block" as supported when it's not, and that leads to array overflows
later on.
This bug is not really a security issue in real life, because debugfs is
generally root only.
Fixes: 36ea1bd2d084 ("drm/amdgpu: add debugfs ctrl node")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We have the rest of the support in the kerne, but we don't actually boot KFD
on the device without this change
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For SR-IOV VF, powerplay may not be supported, in this case,
error '-EINVAL' should not be returned.
Signed-off-by: Trigger Huang <Trigger.Huang@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Found issue in EDID Emulation where if we connect a display using
a passive HDMI-DP dongle, disconnect it and then try to emulate
a display using DP, we could not see 4K modes. This was because
on a disconnect, dongle_max_pix_clk was still set so when we
emulate using DP, in dc_link_validate_mode_timing(), it would
think we were still using a dongle and limit the modes we support.
[How]
In dc_link_detect(), set dongle_max_pix_clk to 0 when we detect
a hotplug out ( if new_connection_type = dc_connection_none ).
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
refactor a code so we will call clk_mgr's enable_pme_wa function so we
can use pme_wa for future asics. This way we don't need to worry about
different ASIC since clk_mgr already have that information
Signed-off-by: Su Sung Chung <Su.Chung@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Description]
The spec does not allow POST_LT_ADJ_GRANTED to be set when TPS4 is used.
Signed-off-by: abdoulaye berthe <abdoulaye.berthe@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
We incorrectly began powering down the display at boot/resume whenever
fast boot was not possible. This should not be done in the case where there
exists a stream for the eDP since this implies that we want to turn it on.
[How]
Add check for eDP stream to decide whether to power off edp.
Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Reza Amini <Reza.Amini@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
By the time output csc matrix is being programmed, stream connection to
OPP has been established, but this information has not been relayed back
to HUBP.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Our existing logic in deciding whether to use RAM or ROM
depends on whether we are dealing with an identity gamma ramp.
[How]
In addition to the is_identity flag
a new is_logical_identity flag has been
added. The is_identity flag now denotes
whether the OS gamma is an RGB256 identity
and the new logical identity will inidicate
that the given gamma ramp regardless of its
type is identity.
Signed-off-by: Harmanprit Tatla <harmanprit.tatla@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
For debugging underflow issues it can be useful to have asserts when the
underflow initially occurs.
[How]
Read the underflow status registers after actions that have a high risk
of causing underflow and assert that no underflow occurred. If underflow
occurred, clear the bit.
Signed-off-by: Thomas Lim <Thomas.Lim@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Currently vmid is decided internally inside dc. This makes it
difficult to use vmid use with external components.
This change moves vmid logic outside dc and allowing vmid to be
passed in as a parameter to DC.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
VBios sometimes reports incorrect object type as encoder instead of
connector
[How]
Change error message to debug message
Signed-off-by: Jordan Lazare <Jordan.Lazare@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
These are no longer needed, Also added RESERVED bits.
Signed-off-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Using this logic breaks driver unload, this is a temporary fix
a followup patch will properly fix this
Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
