| Age | Commit message (Collapse) | Author |
|---|
|
Pull drm fixes from Dave Airlie:
"Not much happening, should have dequeued this lot earlier.
One amdgpu, one nouveau and one exynos fix"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/exynos: atomic check only enabled crtc states
drm/nouveau/bios/fan: hardcode the fan mode to linear
drm/amdgpu: fix user fence handling
|
|
The driver allocates the spinlock but fails to initialize it correctly.
The kernel reports a BUG indicating bad spinlock magic when spinlock
debugging is enabled.
Call spin_lock_init() on it to initialize it correctly.
Fixes: b4e3e59fb59c ("[media] rc: add sunxi-ir driver")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Hariprasad Shenai says:
====================
Trivial enhancements for cxgb4
This series adds a debug message if adapter isn't inserted in right PCI
slot. Changes naming conventions for iSCSI rx queues, use node info while
allocating rx queue and use napi_complete_done() api in napi handler.
This patch series has been created against net-next tree and includes
patches on cxgb4 driver.
We have included all the maintainers of respective drivers. Kindly review
the change and let us know in case of any review comments.
Thanks
V2: Dropped 'dcb_info' debug entry patch, since the same can be achieved
using lldp tool.
Based on review comments by Or Gerlitz <gerlitz.or@gmail.com> and
David Miller.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
All the upper level protocols like rdma, iscsi have their own offload rx
queues, so instead of using the generic naming convention be specific
while naming them. Improves code readability
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Check if the device get enough bandwidth from the entire PCI chain to
satisfy its capabilities. This patch determines the PCIe device's
bandwidth capabilities by reading its PCIe Link Capabilities registers
and then call the pcie_get_minimum_link function to ensure that the
adapter is hooked into a slot which is capable of providing the
necessary bandwidth capabilities.
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Do not remove slave TS NULL padding PID (0x1fff) by default as
there is no real need. After that whole TS is passed to kernel sw
PID filter.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
It is hard to debug possible I2C failures without knowing the
possible register itself. Add register number to error printing.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Return current active rtl2830/rtl2832 register page from the driver
cache in order to reduce I2C I/O. Register page is already cached
due to I2C write needs.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
|
|
Hook up the MPEG-2 ES decoder.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
We could support start streaming with an empty output queue for the
BIT decoders due to the bitstream buffer which could still contain
data at this point, but there is really no reason for userspace to
expect this to work. Simplify the code by disallowing it.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
coda_jpeg_check_buffer only cares about the buffer length and contents,
so change the parameter type back from v4l2_vb2_buffer to just the
vb2_buffer.
Instead of just checking the first and last bytes for the SOI and EOI
markers, relax the EOI marker check a bit and allow up to 32 trailing
bytes after the EOI marker as hardware generated JPEGs sometimes contain
some alignment overhead.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
This function is not used outside coda-common.c.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
MFC register addresses are used only by writel/readl macros which already
takes care of proper register accessing.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Both macros can be merged into one.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
MFC driver uses dev->irqlock spinlock to protect queues only, but many context
fields require protection also - they can be accessed concurrently
from IOCTLs and IRQ handler. The patch increases protection range of irqlock
to those fields also.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Many version specific functions are not called by common code, so there
is no need to use callbacks. Additionally some of them are not used at all,
so they can be safely removed.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Code for queue cleanup has nothing specific to hardware version.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Both version of MFC driver use functions with the same body and name.
The patch moves them to common location. It also simplifies it.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The s5p_mfc_codec_ops structures are never modified, so declare them as
const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
This reverts commit 677a73a9aa54. This patch was not meant to be merged and
has issues. Revert it.
Requested-by: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Atomic changes broke check_digital_port_conflicts(). It needs to look
at the global situation instead of just trying to find a conflict
within the current atomic state.
This bug made my HSW explode spectacularly after I had split the DDI
encoders into separate DP and HDMI encoders. With the fix, things
seem much more solid.
I hope holding the connection_mutex is enough protection that we can
actually walk the connectors even if they're not part of the current
atomic state...
v2: Regenerate the patch so that it actually applies (Jani)
Cc: stable@vger.kernel.org
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Fixes: 5448a00d3f06 ("drm/i915: Don't use staged config in check_digital_port_conflicts()")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449764551-12466-1-git-send-email-ville.syrjala@linux.intel.com
(cherry picked from commit 0bff4858653312a10c83709e0009c3adb87e6f1e)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Remove the WARN() from the beN_to_cpu macro, which is used as a param to a
pr_debug() call. With a certain kernel config, this printk-in-printk
results in the no_printk() macro trying to recursively call the
no_printk() macro, and since macros can't recursively call themselves
a build error results.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This feature should not be enabled in release but can be usefull for
developers who need to monitor register accesses at some specific places.
Set the AES_FLAGS_DUMP_REG flag inside dd->flags to start monitoring the
I/O accesses, clear it to stop monitoring.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds support to the GCM mode.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Increase the DMA threshold to 256: PIO accesses offer better performances
than the DMA when processing small amounts of data.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Depending on its hardware version, the AES IP provides either a 16 or a
32 bit counter. However the CTR mode expects the size of the counter to be
the same as the size of the cipher block, ie 128 bits for AES.
This patch detects and handles counter overflows.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
crypto_rfc3686_alloc() in crypto/ctr.c expects to be used with a stream
cipher (alg->cra_blocksize == 1).
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch only creates sections to regroup functions by usage.
This will help to integrate the GCM support patch later by making the
difference between shared/common and specific code. Hence current
sections are:
- Shared functions: common code which will be reused by the GCM support.
- CPU transfer: handles transfers monitored by the CPU (PIO accesses).
- DMA transfer: handles transfers monitored by the DMA controller.
- AES async block ciphers: dedicated to the already supported block ciphers
- Probe functions: used to register all crypto algorithms.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Dummy patch to fix typo and indentation.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This is a dummy cosmetic patch.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch totally reworks data transfer.
1 - DMA
The new code now fully supports scatter-gather lists hence reducing the
number of interrupts in some cases. Also buffer alignments are better
managed to avoid useless copies.
2 - CPU
The new code allows to use PIO accesses even when transferring more than
one AES block, so futher patches could tune the DMA threshold
(ATMEL_AES_DMA_THRESHOLD).
Moreover, CPU transfers now have a chance to be processed synchronously,
hence reducing the latency by avoiding context switches when possible
(less interrupts to process, less scheduling of the 'done' task).
Indeed the 'DATA READY' bit is polled only one time in the Interrupt
Status Register before enabling then waiting for the associated interrupt.
In some condition, this single poll is enough as the data have already
been processed by the AES hardware and so are ready.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add missing call to atmel_aes_buff_cleanup().
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Since the 'done' task code was split into atmel_aes_cpu_complete() and
atmel_aes_dma_complete(), the AES_FLAGS_DMA flag has become useless.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
atmel_aes_dma_callback() now directly calls the 'resume' callback instead
of scheduling the done task, which in turn only calls the very same
'resume' callback.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This 'err' member was initialized to 0 but its value never changed.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch introduces a new callback 'resume' in the struct atmel_aes_dev.
This callback is run to resume/complete the processing of the crypto
request when woken up by I/O events such as AES interrupts or DMA
completion.
This callback will help implementing the GCM mode support in further
patches.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch reworks the AES_FLAGS_* to simplify the configuration of the
AES IP.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
As claimed by the datasheet, writing 0 into the Control Register has no
effet. So we remove this useless register access.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch changes atmel_aes_handle_queue() to make it more generic.
The function argument is now a pointer to struct crypto_async_request,
which is the common base of struct ablkcipher_request and
struct aead_request.
Also this patch introduces struct atmel_aes_base_ctx which will be the
common base of all the transformation contexts.
Hence the very same queue will be used to manage both block cipher and
AEAD requests (such as gcm and authenc implemented in further patches).
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch changes the signature of atmel_aes_write_ctrl() to make it more
generic. This will be used by future patches when implementing new block
cipher modes such as GCM.
Especially atmel_aes_hw_init() is now called outside
atmel_aes_write_ctrl(): this allows to call atmel_aes_write_ctrl() many
times, still initializing the hardware only once.
Indeed, the support of GCM will require to update the Mode Register and
the IV when processing a single request.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Before this patch atmel_aes_hw_version_init() had no returned value.
However it calls atmel_aes_hw_init(), which may fail. So check the
returned code of atmel_aes_hw_init() and propagate error if needed.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Hash headers have nothing to do with AES block ciphers.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This dummy patch fixes atmel_aes_unregister_algs() so crypto algorithms
are unregistered in the reverse order they were registered by
atmel_aes_register_algs().
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Increase the algorithm priorities so the hardware acceleration is now
preferred to the software computation: the "aes-generice" driver uses 100
as priority.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
