| Age | Commit message (Collapse) | Author |
|---|
|
Several architectures support text patching, but they name the header
files that declare patching functions differently.
Make all such headers consistently named text-patching.h and add an empty
header in asm-generic for architectures that do not support text patching.
Link: https://lkml.kernel.org/r/20241023162711.2579610-4-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Tested-by: kdevops <kdevops@lists.linux.dev>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Song Liu <song@kernel.org>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
vmalloc allocations with VM_ALLOW_HUGE_VMAP that do not explicitly specify
node ID will use huge pages only if size_per_node is larger than a huge
page.
Still the actual allocated memory is not distributed between nodes and
there is no advantage in such approach. On the contrary, BPF allocates
SZ_2M * num_possible_nodes() for each new bpf_prog_pack, while it could do
with a single huge page per pack.
Don't account for number of nodes for VM_ALLOW_HUGE_VMAP with NUMA_NO_NODE
and use huge pages whenever the requested allocation size is larger than a
huge page.
Link: https://lkml.kernel.org/r/20241023162711.2579610-3-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Tested-by: kdevops <kdevops@lists.linux.dev>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Song Liu <song@kernel.org>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "x86/module: use large ROX pages for text allocations", v7.
These patches add support for using large ROX pages for allocations of
executable memory on x86.
They address Andy's comments [1] about having executable mappings for code
that was not completely formed.
The approach taken is to allocate ROX memory along with writable but not
executable memory and use the writable copy to perform relocations and
alternatives patching. After the module text gets into its final shape,
the contents of the writable memory is copied into the actual ROX location
using text poking.
The allocations of the ROX memory use vmalloc(VMAP_ALLOW_HUGE_MAP) to
allocate PMD aligned memory, fill that memory with invalid instructions
and in the end remap it as ROX. Portions of these large pages are handed
out to execmem_alloc() callers without any changes to the permissions.
When the memory is freed with execmem_free() it is invalidated again so
that it won't contain stale instructions.
The module memory allocation, x86 code dealing with relocations and
alternatives patching take into account the existence of the two copies,
the writable memory and the ROX memory at the actual allocated virtual
address.
[1] https://lore.kernel.org/all/a17c65c6-863f-4026-9c6f-a04b659e9ab4@app.fastmail.com
This patch (of 8):
There are a couple of declarations that depend on CONFIG_MMU in
include/linux/vmalloc.h spread all over the file.
Group them all together to improve code readability.
No functional changes.
Link: https://lkml.kernel.org/r/20241023162711.2579610-1-rppt@kernel.org
Link: https://lkml.kernel.org/r/20241023162711.2579610-2-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Tested-by: kdevops <kdevops@lists.linux.dev>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Song Liu <song@kernel.org>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The following pattern becomes more and more:
+ io_req_assign_rsrc_node(&req->buf_node, node);
+ req->flags |= REQ_F_BUF_NODE;
so make it a helper, which is less fragile to use than above code, for
example, the BUF_NODE flag is even missed in current io_uring_cmd_prep().
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241107110149.890530-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Remove '->ctx_ptr' of 'struct io_rsrc_node', and add 'type' field,
meantime remove io_rsrc_node_type().
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241107110149.890530-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
`io_rsrc_node` instance won't be shared among different io_uring ctxs,
and its allocation 'ctx' is always same with the user's 'ctx', so it is
safe to pass user 'ctx' reference to rsrc helpers. Even in io_clone_buffers(),
`io_rsrc_node` instance is allocated actually for destination io_uring_ctx.
Then io_rsrc_node_ctx() can be removed, and the 8 bytes `ctx` pointer will be
removed from `io_rsrc_node` in the following patch.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241107110149.890530-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Map my previously used email address to my @linux.dev address.
Link: https://lkml.kernel.org/r/20241103234411.2522-2-thorsten.blum@linux.dev
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Cc: Alex Elder <elder@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geliang Tang <geliang@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Mathieu Othacehe <m.othacehe@gmail.com>
Cc: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Cc: Matt Ranostay <matt@ranostay.sg>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
Cc: Quentin Monnet <qmo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Syzkaller is able to provoke null-ptr-dereference in ocfs2_xa_remove():
[ 57.319872] (a.out,1161,7):ocfs2_xa_remove:2028 ERROR: status = -12
[ 57.320420] (a.out,1161,7):ocfs2_xa_cleanup_value_truncate:1999 ERROR: Partial truncate while removing xattr overlay.upper. Leaking 1 clusters and removing the entry
[ 57.321727] BUG: kernel NULL pointer dereference, address: 0000000000000004
[...]
[ 57.325727] RIP: 0010:ocfs2_xa_block_wipe_namevalue+0x2a/0xc0
[...]
[ 57.331328] Call Trace:
[ 57.331477] <TASK>
[...]
[ 57.333511] ? do_user_addr_fault+0x3e5/0x740
[ 57.333778] ? exc_page_fault+0x70/0x170
[ 57.334016] ? asm_exc_page_fault+0x2b/0x30
[ 57.334263] ? __pfx_ocfs2_xa_block_wipe_namevalue+0x10/0x10
[ 57.334596] ? ocfs2_xa_block_wipe_namevalue+0x2a/0xc0
[ 57.334913] ocfs2_xa_remove_entry+0x23/0xc0
[ 57.335164] ocfs2_xa_set+0x704/0xcf0
[ 57.335381] ? _raw_spin_unlock+0x1a/0x40
[ 57.335620] ? ocfs2_inode_cache_unlock+0x16/0x20
[ 57.335915] ? trace_preempt_on+0x1e/0x70
[ 57.336153] ? start_this_handle+0x16c/0x500
[ 57.336410] ? preempt_count_sub+0x50/0x80
[ 57.336656] ? _raw_read_unlock+0x20/0x40
[ 57.336906] ? start_this_handle+0x16c/0x500
[ 57.337162] ocfs2_xattr_block_set+0xa6/0x1e0
[ 57.337424] __ocfs2_xattr_set_handle+0x1fd/0x5d0
[ 57.337706] ? ocfs2_start_trans+0x13d/0x290
[ 57.337971] ocfs2_xattr_set+0xb13/0xfb0
[ 57.338207] ? dput+0x46/0x1c0
[ 57.338393] ocfs2_xattr_trusted_set+0x28/0x30
[ 57.338665] ? ocfs2_xattr_trusted_set+0x28/0x30
[ 57.338948] __vfs_removexattr+0x92/0xc0
[ 57.339182] __vfs_removexattr_locked+0xd5/0x190
[ 57.339456] ? preempt_count_sub+0x50/0x80
[ 57.339705] vfs_removexattr+0x5f/0x100
[...]
Reproducer uses faultinject facility to fail ocfs2_xa_remove() ->
ocfs2_xa_value_truncate() with -ENOMEM.
In this case the comment mentions that we can return 0 if
ocfs2_xa_cleanup_value_truncate() is going to wipe the entry
anyway. But the following 'rc' check is wrong and execution flow do
'ocfs2_xa_remove_entry(loc);' twice:
* 1st: in ocfs2_xa_cleanup_value_truncate();
* 2nd: returning back to ocfs2_xa_remove() instead of going to 'out'.
Fix this by skipping the 2nd removal of the same entry and making
syzkaller repro happy.
Link: https://lkml.kernel.org/r/20241103193845.2940988-1-andrew.kanner@gmail.com
Fixes: 399ff3a748cf ("ocfs2: Handle errors while setting external xattr values.")
Signed-off-by: Andrew Kanner <andrew.kanner@gmail.com>
Reported-by: syzbot+386ce9e60fa1b18aac5b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/671e13ab.050a0220.2b8c0f.01d0.GAE@google.com/T/
Tested-by: syzbot+386ce9e60fa1b18aac5b@syzkaller.appspotmail.com
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Prior to commit d64696905554 ("Reimplement RLIMIT_SIGPENDING on top of
ucounts") UCOUNT_RLIMIT_SIGPENDING rlimit was not enforced for a class of
signals. However now it's enforced unconditionally, even if
override_rlimit is set. This behavior change caused production issues.
For example, if the limit is reached and a process receives a SIGSEGV
signal, sigqueue_alloc fails to allocate the necessary resources for the
signal delivery, preventing the signal from being delivered with siginfo.
This prevents the process from correctly identifying the fault address and
handling the error. From the user-space perspective, applications are
unaware that the limit has been reached and that the siginfo is
effectively 'corrupted'. This can lead to unpredictable behavior and
crashes, as we observed with java applications.
Fix this by passing override_rlimit into inc_rlimit_get_ucounts() and skip
the comparison to max there if override_rlimit is set. This effectively
restores the old behavior.
Link: https://lkml.kernel.org/r/20241104195419.3962584-1-roman.gushchin@linux.dev
Fixes: d64696905554 ("Reimplement RLIMIT_SIGPENDING on top of ucounts")
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Co-developed-by: Andrei Vagin <avagin@google.com>
Signed-off-by: Andrei Vagin <avagin@google.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Alexey Gladkov <legion@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When build with !CONFIG_MMU, the variable 'vmcore_mmap_ops'
is defined but not used:
>> fs/proc/vmcore.c:458:42: warning: unused variable 'vmcore_mmap_ops'
458 | static const struct vm_operations_struct vmcore_mmap_ops = {
Fix this by only defining it when CONFIG_MMU is enabled.
Link: https://lkml.kernel.org/r/20241101034803.9298-1-xiqi2@huawei.com
Fixes: 9cb218131de1 ("vmcore: introduce remap_oldmem_pfn_range()")
Signed-off-by: Qi Xi <xiqi2@huawei.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/lkml/202410301936.GcE8yUos-lkp@intel.com/
Cc: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Wang ShaoBo <bobo.shaobowang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The inc_rlimit_get_ucounts() increments the specified rlimit counter and
then checks its limit. If the value exceeds the limit, the function
returns an error without decrementing the counter.
Link: https://lkml.kernel.org/r/20241101191940.3211128-1-roman.gushchin@linux.dev
Fixes: 15bc01effefe ("ucounts: Fix signal ucount refcounting")
Signed-off-by: Andrei Vagin <avagin@google.com>
Co-developed-by: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Tested-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Alexey Gladkov <legion@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Andrei Vagin <avagin@google.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Alexey Gladkov <legion@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The test should be skipped if initial conditions aren't fulfilled in the
start instead of failing and outputting non-compliant TAP logs. This kind
of failure pollutes the results. The initial conditions are:
- The test should only execute if /tmp file can be allocated.
- The test should only execute if huge pages are free.
Before:
TAP version 13
1..4
Bail out! Error opening file
: Read-only file system (30)
# Planned tests != run tests (4 != 0)
# Totals: pass:0 fail:0 xfail:0 xpass:0 skip:0 error:0
After:
TAP version 13
1..0 # SKIP Unable to allocate file: Read-only file system
Link: https://lkml.kernel.org/r/20241101141557.3159432-1-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Fixes: 3a103b5315b7 ("selftest: mm: Test if hugepage does not get leaked during __bio_release_pages()")
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Donet Tom <donettom@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If we add ``thp_anon=32,64K:always`` to the kernel command line, we
will see the following error:
[ 0.000000] huge_memory: thp_anon=32,64K:always: error parsing string, ignoring setting
This happens because the correct format isn't ``thp_anon=<size>,<size>[KMG]:<state>```,
as [KMG] must follow each number to especify its unit. So, the correct
format is ``thp_anon=<size>[KMG],<size>[KMG]:<state>```.
Therefore, adjust the documentation to reflect the correct format of the
parameter ``thp_anon=``.
Link: https://lkml.kernel.org/r/20241101165719.1074234-3-mcanal@igalia.com
Fixes: dd4d30d1cdbe ("mm: override mTHP "enabled" defaults at kernel cmdline")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Acked-by: Barry Song <baohua@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
damon_feed_loop_next_input() is inefficient and fragile to overflows.
Specifically, 'score_goal_diff_bp' calculation can overflow when 'score'
is high. The calculation is actually unnecessary at all because 'goal' is
a constant of value 10,000. Calculation of 'compensation' is again
fragile to overflow. Final calculation of return value for under-achiving
case is again fragile to overflow when the current score is
under-achieving the target.
Add two corner cases handling at the beginning of the function to make the
body easier to read, and rewrite the body of the function to avoid
overflows and the unnecessary bp value calcuation.
Link: https://lkml.kernel.org/r/20241031161203.47751-1-sj@kernel.org
Fixes: 9294a037c015 ("mm/damon/core: implement goal-oriented feedback-driven quota auto-tuning")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/944f3d5b-9177-48e7-8ec9-7f1331a3fea3@roeck-us.net
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: <stable@vger.kernel.org> [6.8.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMON's logics to determine if this is the time to apply damos schemes
assumes next_apply_sis is always set larger than current
passed_sample_intervals. And therefore assume continuously incrementing
passed_sample_intervals will make it reaches to the next_apply_sis in
future. The logic hence does apply the scheme and update next_apply_sis
only if passed_sample_intervals is same to next_apply_sis.
If Schemes apply interval is set as zero, however, next_apply_sis is set
same to current passed_sample_intervals, respectively. And
passed_sample_intervals is incremented before doing the next_apply_sis
check. Hence, next_apply_sis becomes larger than next_apply_sis, and the
logic says it is not the time to apply schemes and update next_apply_sis.
In other words, DAMON stops applying schemes until passed_sample_intervals
overflows.
Based on the documents and the common sense, a reasonable behavior for
such inputs would be applying the schemes for every sampling interval.
Handle the case by removing the assumption.
Link: https://lkml.kernel.org/r/20241031183757.49610-3-sj@kernel.org
Fixes: 42f994b71404 ("mm/damon/core: implement scheme-specific apply interval")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [6.7.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/damon/core: fix handling of zero non-sampling intervals".
DAMON's internal intervals accounting logic is not correctly handling
non-sampling intervals of zero values for a wrong assumption. This could
cause unexpected monitoring behavior, and even result in infinite hang of
DAMON sysfs interface user threads in case of zero aggregation interval.
Fix those by updating the intervals accounting logic. For details of the
root case and solutions, please refer to commit messages of fixes.
This patch (of 2):
DAMON's logics to determine if this is the time to do aggregation and ops
update assumes next_{aggregation,ops_update}_sis are always set larger
than current passed_sample_intervals. And therefore it further assumes
continuously incrementing passed_sample_intervals every sampling interval
will make it reaches to the next_{aggregation,ops_update}_sis in future.
The logic therefore make the action and update
next_{aggregation,ops_updaste}_sis only if passed_sample_intervals is same
to the counts, respectively.
If Aggregation interval or Ops update interval are zero, however,
next_aggregation_sis or next_ops_update_sis are set same to current
passed_sample_intervals, respectively. And passed_sample_intervals is
incremented before doing the next_{aggregation,ops_update}_sis check.
Hence, passed_sample_intervals becomes larger than
next_{aggregation,ops_update}_sis, and the logic says it is not the time
to do the action and update next_{aggregation,ops_update}_sis forever,
until an overflow happens. In other words, DAMON stops doing aggregations
or ops updates effectively forever, and users cannot get monitoring
results.
Based on the documents and the common sense, a reasonable behavior for
such inputs is doing an aggregation and an ops update for every sampling
interval. Handle the case by removing the assumption.
Note that this could incur particular real issue for DAMON sysfs interface
users, in case of zero Aggregation interval. When user starts DAMON with
zero Aggregation interval and asks online DAMON parameter tuning via DAMON
sysfs interface, the request is handled by the aggregation callback.
Until the callback finishes the work, the user who requested the online
tuning just waits. Hence, the user will be stuck until the
passed_sample_intervals overflows.
Link: https://lkml.kernel.org/r/20241031183757.49610-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20241031183757.49610-2-sj@kernel.org
Fixes: 4472edf63d66 ("mm/damon/core: use number of passed access sampling as a timer")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [6.7.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After commit 94d7d9233951 ("mm: abstract the vma_merge()/split_vma()
pattern for mprotect() et al."), if vma_modify_flags() return error, the
vma is set to an error code. This will lead to an invalid prev be
returned.
Generally this shouldn't matter as the caller should treat an error as
indicating state is now invalidated, however unfortunately
apply_mlockall_flags() does not check for errors and assumes that
mlock_fixup() correctly maintains prev even if an error were to occur.
This patch fixes that assumption.
[lorenzo.stoakes@oracle.com: provide a better fix and rephrase the log]
Link: https://lkml.kernel.org/r/20241027123321.19511-1-richard.weiyang@gmail.com
Fixes: 94d7d9233951 ("mm: abstract the vma_merge()/split_vma() pattern for mprotect() et al.")
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since gfp & GFP_ATOMIC == GFP_ATOMIC is true for GFP_KERNEL | GFP_HIGH, it
will use kmalloc if user specifies that combination. Here the reason why
combining the __vmalloc_node() and kmalloc_node() is that the vmalloc does
not support all GFP flag, especially GFP_ATOMIC. So we should check if
gfp & (GFP_ATOMIC | GFP_KERNEL) != GFP_ATOMIC for vmalloc first. This
ensures caller can sleep. And for the robustness, even if vmalloc fails,
it should retry with kmalloc to allocate it.
Link: https://lkml.kernel.org/r/173008598713.1262174.2959179484209897252.stgit@mhiramat.roam.corp.google.com
Fixes: aff1871bfc81 ("objpool: fix choosing allocation for percpu slots")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Closes: https://lore.kernel.org/all/CAHk-=whO+vSH+XVRio8byJU8idAWES0SPGVZ7KAVdc4qrV0VUA@mail.gmail.com/
Cc: Leo Yan <leo.yan@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Wu <wuqiang.matt@bytedance.com>
Cc: Mikel Rychliski <mikel@mikelr.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
OOM kills due to vastly overestimated free highatomic reserves were
observed:
... invoked oom-killer: gfp_mask=0x100cca(GFP_HIGHUSER_MOVABLE), order=0 ...
Node 0 Normal free:1482936kB boost:0kB min:410416kB low:739404kB high:1068392kB reserved_highatomic:1073152KB ...
Node 0 Normal: 1292*4kB (ME) 1920*8kB (E) 383*16kB (UE) 220*32kB (ME) 340*64kB (E) 2155*128kB (UE) 3243*256kB (UE) 615*512kB (U) 1*1024kB (M) 0*2048kB 0*4096kB = 1477408kB
The second line above shows that the OOM kill was due to the following
condition:
free (1482936kB) - reserved_highatomic (1073152kB) = 409784KB < min (410416kB)
And the third line shows there were no free pages in any
MIGRATE_HIGHATOMIC pageblocks, which otherwise would show up as type 'H'.
Therefore __zone_watermark_unusable_free() underestimated the usable free
memory by over 1GB, which resulted in the unnecessary OOM kill above.
The comments in __zone_watermark_unusable_free() warns about the potential
risk, i.e.,
If the caller does not have rights to reserves below the min
watermark then subtract the high-atomic reserves. This will
over-estimate the size of the atomic reserve but it avoids a search.
However, it is possible to keep track of free pages in reserved highatomic
pageblocks with a new per-zone counter nr_free_highatomic protected by the
zone lock, to avoid a search when calculating the usable free memory. And
the cost would be minimal, i.e., simple arithmetics in the highatomic
alloc/free/move paths.
Note that since nr_free_highatomic can be relatively small, using a
per-cpu counter might cause too much drift and defeat its purpose, in
addition to the extra memory overhead.
Dependson e0932b6c1f94 ("mm: page_alloc: consolidate free page accounting") - see [1]
[akpm@linux-foundation.org: s/if/else if/, per Johannes, stealth whitespace tweak]
Link: https://lkml.kernel.org/r/20241028182653.3420139-1-yuzhao@google.com
Link: https://lkml.kernel.org/r/0d0ddb33-fcdc-43e2-801f-0c1df2031afb@suse.cz [1]
Fixes: 0aaa29a56e4f ("mm, page_alloc: reserve pageblocks for high-order atomic allocations on demand")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reported-by: Link Lin <linkl@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 6e182dc9f268 ("selftests/mm: Use generic pkey register
manipulation") makes use of PKEY_UNRESTRICTED in
pkey_sighandler_tests. The macro has been proposed for addition to
uapi headers [1], but the patch hasn't landed yet.
Define PKEY_UNRESTRICTED in pkey-helpers.h for the time being to fix
the build.
[1] https://lore.kernel.org/all/20241028090715.509527-2-yury.khrustalev@arm.com/
Fixes: 6e182dc9f268 ("selftests/mm: Use generic pkey register manipulation")
Reported-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Link: https://lore.kernel.org/r/20241107131640.650703-1-kevin.brodsky@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
In the error recovery path of mlx5_vdpa_dev_add(), the cleanup is
executed and at the end put_device() is called which ends up calling
mlx5_vdpa_free(). This function will execute the same cleanup all over
again. Most resources support being cleaned up twice, but the recent
mlx5_vdpa_destroy_mr_resources() doesn't.
This change drops the explicit cleanup from within the
mlx5_vdpa_dev_add() and lets mlx5_vdpa_free() do its work.
This issue was discovered while trying to add 2 vdpa devices with the
same name:
$> vdpa dev add name vdpa-0 mgmtdev auxiliary/mlx5_core.sf.2
$> vdpa dev add name vdpa-0 mgmtdev auxiliary/mlx5_core.sf.3
... yields the following dump:
BUG: kernel NULL pointer dereference, address: 00000000000000b8
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP
CPU: 4 UID: 0 PID: 2811 Comm: vdpa Not tainted 6.12.0-rc6 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:destroy_workqueue+0xe/0x2a0
Code: ...
RSP: 0018:ffff88814920b9a8 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff888105c10000 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffff888100400168 RDI: 0000000000000000
RBP: 0000000000000000 R08: ffff888100120c00 R09: ffffffff828578c0
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: ffff888131fd99a0 R14: 0000000000000000 R15: ffff888105c10580
FS: 00007fdfa6b4f740(0000) GS:ffff88852ca00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000b8 CR3: 000000018db09006 CR4: 0000000000372eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? __die+0x20/0x60
? page_fault_oops+0x150/0x3e0
? exc_page_fault+0x74/0x130
? asm_exc_page_fault+0x22/0x30
? destroy_workqueue+0xe/0x2a0
mlx5_vdpa_destroy_mr_resources+0x2b/0x40 [mlx5_vdpa]
mlx5_vdpa_free+0x45/0x150 [mlx5_vdpa]
vdpa_release_dev+0x1e/0x50 [vdpa]
device_release+0x31/0x90
kobject_put+0x8d/0x230
mlx5_vdpa_dev_add+0x328/0x8b0 [mlx5_vdpa]
vdpa_nl_cmd_dev_add_set_doit+0x2b8/0x4c0 [vdpa]
genl_family_rcv_msg_doit+0xd0/0x120
genl_rcv_msg+0x180/0x2b0
? __vdpa_alloc_device+0x1b0/0x1b0 [vdpa]
? genl_family_rcv_msg_dumpit+0xf0/0xf0
netlink_rcv_skb+0x54/0x100
genl_rcv+0x24/0x40
netlink_unicast+0x1fc/0x2d0
netlink_sendmsg+0x1e4/0x410
__sock_sendmsg+0x38/0x60
? sockfd_lookup_light+0x12/0x60
__sys_sendto+0x105/0x160
? __count_memcg_events+0x53/0xe0
? handle_mm_fault+0x100/0x220
? do_user_addr_fault+0x40d/0x620
__x64_sys_sendto+0x20/0x30
do_syscall_64+0x4c/0x100
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7fdfa6c66b57
Code: ...
RSP: 002b:00007ffeace22998 EFLAGS: 00000202 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 000055a498608350 RCX: 00007fdfa6c66b57
RDX: 000000000000006c RSI: 000055a498608350 RDI: 0000000000000003
RBP: 00007ffeace229c0 R08: 00007fdfa6d35200 R09: 000000000000000c
R10: 0000000000000000 R11: 0000000000000202 R12: 000055a4986082a0
R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffeace233f3
</TASK>
Modules linked in: ...
CR2: 00000000000000b8
Fixes: 62111654481d ("vdpa/mlx5: Postpone MR deletion")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20241105185101.1323272-2-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
|
|
If we error in data_update_init() after adding to the rhashtable of
outstanding promotes, kfree_rcu() is required.
Reported-by: Reed Riley <reed@riley.engineer>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Change OPT_STR max value to be 1 less than the "ARRAY_SIZE" of "_choices"
array. As a result, remove -1 from (opt->max-1) in bch2_opt_to_text.
The "_choices" array is a null-terminated array, so computing the maximum
using "ARRAY_SIZE" without subtracting 1 yields an incorrect result. Since
bch2_opt_validate don't subtract 1, as bch2_opt_to_text does, values
bigger than the actual maximum would pass through option validation.
Reported-by: syzbot+bee87a0c3291c06aa8c6@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=bee87a0c3291c06aa8c6
Fixes: 63c4b2545382 ("bcachefs: Better superblock opt validation")
Suggested-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Piotr Zalewski <pZ010001011111@proton.me>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When allocating new btree nodes, we were leaving them on the freeable
list - unlocked - allowing them to be reclaimed: ouch.
Additionally, bch2_btree_node_free_never_used() ->
bch2_btree_node_hash_remove was putting it on the freelist, while
bch2_btree_node_free_never_used() was putting it back on the btree
update reserve list - ouch.
Originally, the code was written to always keep btree nodes on a list -
live or freeable - and this worked when new nodes were kept locked.
But now with the cycle detector, we can't keep nodes locked that aren't
tracked by the cycle detector; and this is fine as long as they're not
reachable.
We also have better and more robust leak detection now, with memory
allocation profiling, so the original justification no longer applies.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The perf_test does not check the number of iterations and threads
when it is zero. If nr_thread is 0, the perf test will keep
waiting for wakekup. If iteration is 0, it will cause exception
of division by zero. This can be reproduced by:
echo "rand_insert 0 1" > /sys/fs/bcachefs/${uuid}/perf_test
or
echo "rand_insert 1 0" > /sys/fs/bcachefs/${uuid}/perf_test
Fixes: 1c6fdbd8f246 ("bcachefs: Initial commit")
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bio_kmalloc may return NULL, will cause NULL pointer dereference.
Add check NULL return for bio_kmalloc in journal_read_bucket.
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Fixes: ac10a9611d87 ("bcachefs: Some fixes for building in userspace")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If BCH_FS_may_go_rw is not yet set, it indicates to the transaction
commit path that updates should be done via the list of journal replay
keys.
This must be set before multithreaded use commences.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If a btree split picks a pivot that's being deleted by a btree node
merge, we're going to have problems.
Fix this by checking if the pivot is being deleted, the same as we check
for deletions in journal replay keys.
Found by single_devic.ktest small_nodes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Syzbot found an assertion pop, by generating an ancient filesystem
version with an invalid bkey_format (with fields that can overflow) as
well as packed keys that aren't representable unpacked.
This breaks key comparisons in all sorts of painful ways.
Filesystems have been automatically rewriting nodes with such invalid
formats for years; we can safely drop support for them.
Reported-by: syzbot+8a0109511de9d4b61217@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bucket_gen() checks if we're lookup up a valid bucket and returns NULL
otherwise, but bucket_gen_get() was failing to check; other callers were
correct.
Also do a bit of cleanup on callers.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Close a socket with dump in progress. We need a dump which generates
enough info not to fit into a single skb. Policy dump fits the bill.
Use the trick discovered by syzbot for keeping a ref on the socket
longer than just close, with mqueue.
TAP version 13
1..3
# Starting 3 tests from 1 test cases.
# RUN global.test_sanity ...
# OK global.test_sanity
ok 1 global.test_sanity
# RUN global.close_in_progress ...
# OK global.close_in_progress
ok 2 global.close_in_progress
# RUN global.close_with_ref ...
# OK global.close_with_ref
ok 3 global.close_with_ref
# PASSED: 3 / 3 tests passed.
# Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0
Note that this test is not expected to fail but rather crash
the kernel if we get the cleanup wrong.
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241106015235.2458807-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Netlink supports iterative dumping of data. It provides the families
the following ops:
- start - (optional) kicks off the dumping process
- dump - actual dump helper, keeps getting called until it returns 0
- done - (optional) pairs with .start, can be used for cleanup
The whole process is asynchronous and the repeated calls to .dump
don't actually happen in a tight loop, but rather are triggered
in response to recvmsg() on the socket.
This gives the user full control over the dump, but also means that
the user can close the socket without getting to the end of the dump.
To make sure .start is always paired with .done we check if there
is an ongoing dump before freeing the socket, and if so call .done.
The complication is that sockets can get freed from BH and .done
is allowed to sleep. So we use a workqueue to defer the call, when
needed.
Unfortunately this does not work correctly. What we defer is not
the cleanup but rather releasing a reference on the socket.
We have no guarantee that we own the last reference, if someone
else holds the socket they may release it in BH and we're back
to square one.
The whole dance, however, appears to be unnecessary. Only the user
can interact with dumps, so we can clean up when socket is closed.
And close always happens in process context. Some async code may
still access the socket after close, queue notification skbs to it etc.
but no dumps can start, end or otherwise make progress.
Delete the workqueue and flush the dump state directly from the release
handler. Note that further cleanup is possible in -next, for instance
we now always call .done before releasing the main module reference,
so dump doesn't have to take a reference of its own.
Reported-by: syzkaller <syzkaller@googlegroups.com>
Fixes: ed5d7788a934 ("netlink: Do not schedule work from sk_destruct")
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241106015235.2458807-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.12-rc7).
Conflicts:
drivers/net/ethernet/freescale/enetc/enetc_pf.c
e15c5506dd39 ("net: enetc: allocate vf_state during PF probes")
3774409fd4c6 ("net: enetc: build enetc_pf_common.c as a separate module")
https://lore.kernel.org/20241105114100.118bd35e@canb.auug.org.au
Adjacent changes:
drivers/net/ethernet/ti/am65-cpsw-nuss.c
de794169cf17 ("net: ethernet: ti: am65-cpsw: Fix multi queue Rx on J7")
4a7b2ba94a59 ("net: ethernet: ti: am65-cpsw: Use tstats instead of open coded version")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from can and netfilter.
Things are slowing down quite a bit, mostly driver fixes here. No
known ongoing investigations.
Current release - new code bugs:
- eth: ti: am65-cpsw:
- fix multi queue Rx on J7
- fix warning in am65_cpsw_nuss_remove_rx_chns()
Previous releases - regressions:
- mptcp: do not require admin perm to list endpoints, got missed in a
refactoring
- mptcp: use sock_kfree_s instead of kfree
Previous releases - always broken:
- sctp: properly validate chunk size in sctp_sf_ootb() fix OOB access
- virtio_net: make RSS interact properly with queue number
- can: mcp251xfd: mcp251xfd_get_tef_len(): fix length calculation
- can: mcp251xfd: mcp251xfd_ring_alloc(): fix coalescing
configuration when switching CAN modes
Misc:
- revert earlier hns3 fixes, they were ignoring IOMMU abstractions
and need to be reworked
- can: {cc770,sja1000}_isa: allow building on x86_64"
* tag 'net-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (42 commits)
drivers: net: ionic: add missed debugfs cleanup to ionic_probe() error path
net/smc: do not leave a dangling sk pointer in __smc_create()
rxrpc: Fix missing locking causing hanging calls
net/smc: Fix lookup of netdev by using ib_device_get_netdev()
net: arc: rockchip: fix emac mdio node support
net: arc: fix the device for dma_map_single/dma_unmap_single
virtio_net: Update rss when set queue
virtio_net: Sync rss config to device when virtnet_probe
virtio_net: Add hash_key_length check
virtio_net: Support dynamic rss indirection table size
netfilter: nf_tables: wait for rcu grace period on net_device removal
net: stmmac: Fix unbalanced IRQ wake disable warning on single irq case
net: vertexcom: mse102x: Fix possible double free of TX skb
mptcp: use sock_kfree_s instead of kfree
mptcp: no admin perm to list endpoints
net: phy: ti: add PHY_RST_AFTER_CLK_EN flag
net: ethernet: ti: am65-cpsw: fix warning in am65_cpsw_nuss_remove_rx_chns()
net: ethernet: ti: am65-cpsw: Fix multi queue Rx on J7
net: hns3: fix kernel crash when uninstalling driver
Revert "Merge branch 'there-are-some-bugfix-for-the-hns3-ethernet-driver'"
...
|
|
Pull NVMe fix from Keith:
"nvme fix for Linux 6.13
- Use correct list traversal for srcu lists (Breno)"
* tag 'nvme-6.12-2024-11-07' of git://git.infradead.org/nvme:
nvme/host: Fix RCU list traversal to use SRCU primitive
|
|
Merge series from Kiseok Jo <kiseok.jo@irondevice.com>:
This adds basic audio support for the Iron Device SMA1307 amplifier
|
|
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The PROBE_INFO (ext_manifest type 3) is not used by the kernel, but
at every tiem the firmware is loaded the following is printed in
info level (user visible):
unknown sof_ext_man header type 3 size 0x30
The type is known, but it is not handled, the print is misleading.
|
|
Long metric names combined with units may exceed the metric_bf and
lead to truncation. Double metric_bf in size to avoid this.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20241106004818.2174593-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
This is a preparation patch for NVMeOF target reservation
commands implantation.
Add the defines of reservation command, such as reservation log
and sub operations.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The ionic_setup_one() creates a debugfs entry for ionic upon
successful execution. However, the ionic_probe() does not
release the dentry before returning, resulting in a memory
leak.
To fix this bug, we add the ionic_debugfs_del_dev() to release
the resources in a timely manner before returning.
Fixes: 0de38d9f1dba ("ionic: extract common bits from ionic_probe")
Signed-off-by: Wentao Liang <Wentao_liang_g@163.com>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://patch.msgid.link/20241107021756.1677-1-liangwentao@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Thanks to commit 4bbd360a5084 ("socket: Print pf->create() when
it does not clear sock->sk on failure."), syzbot found an issue with AF_SMC:
smc_create must clear sock->sk on failure, family: 43, type: 1, protocol: 0
WARNING: CPU: 0 PID: 5827 at net/socket.c:1565 __sock_create+0x96f/0xa30 net/socket.c:1563
Modules linked in:
CPU: 0 UID: 0 PID: 5827 Comm: syz-executor259 Not tainted 6.12.0-rc6-next-20241106-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
RIP: 0010:__sock_create+0x96f/0xa30 net/socket.c:1563
Code: 03 00 74 08 4c 89 e7 e8 4f 3b 85 f8 49 8b 34 24 48 c7 c7 40 89 0c 8d 8b 54 24 04 8b 4c 24 0c 44 8b 44 24 08 e8 32 78 db f7 90 <0f> 0b 90 90 e9 d3 fd ff ff 89 e9 80 e1 07 fe c1 38 c1 0f 8c ee f7
RSP: 0018:ffffc90003e4fda0 EFLAGS: 00010246
RAX: 099c6f938c7f4700 RBX: 1ffffffff1a595fd RCX: ffff888034823c00
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 00000000ffffffe9 R08: ffffffff81567052 R09: 1ffff920007c9f50
R10: dffffc0000000000 R11: fffff520007c9f51 R12: ffffffff8d2cafe8
R13: 1ffffffff1a595fe R14: ffffffff9a789c40 R15: ffff8880764298c0
FS: 000055557b518380(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa62ff43225 CR3: 0000000031628000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
sock_create net/socket.c:1616 [inline]
__sys_socket_create net/socket.c:1653 [inline]
__sys_socket+0x150/0x3c0 net/socket.c:1700
__do_sys_socket net/socket.c:1714 [inline]
__se_sys_socket net/socket.c:1712 [inline]
For reference, see commit 2d859aff775d ("Merge branch
'do-not-leave-dangling-sk-pointers-in-pf-create-functions'")
Fixes: d25a92ccae6b ("net/smc: Introduce IPPROTO_SMC")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ignat Korchagin <ignat@cloudflare.com>
Cc: D. Wythe <alibuda@linux.alibaba.com>
Cc: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Link: https://patch.msgid.link/20241106221922.1544045-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If a call gets aborted (e.g. because kafs saw a signal) between it being
queued for connection and the I/O thread picking up the call, the abort
will be prioritised over the connection and it will be removed from
local->new_client_calls by rxrpc_disconnect_client_call() without a lock
being held. This may cause other calls on the list to disappear if a race
occurs.
Fix this by taking the client_call_lock when removing a call from whatever
list its ->wait_link happens to be on.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Fixes: 9d35d880e0e4 ("rxrpc: Move client call connection to the I/O thread")
Link: https://patch.msgid.link/726660.1730898202@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The SMC-R variant of the SMC protocol used direct call to function
ib_device_ops.get_netdev() to lookup netdev. As we used mlx5 device
driver to run SMC-R, it failed to find a device, because in mlx5_ib the
internal net device management for retrieving net devices was replaced
by a common interface ib_device_get_netdev() in commit 8d159eb2117b
("RDMA/mlx5: Use IB set_netdev and get_netdev functions").
Since such direct accesses to the internal net device management is not
recommended at all, update the SMC-R code to use proper API
ib_device_get_netdev().
Fixes: 54903572c23c ("net/smc: allow pnetid-less configuration")
Reported-by: Aswin K <aswin@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://patch.msgid.link/20241106082612.57803-1-wenjia@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The commit 0fe881f10ceb ("perf jevents: Autogenerate empty-pmu-events.c")
build will generate two files, add them to .gitignore:
tools/perf/pmu-events/empty-pmu-events.log
tools/perf/pmu-events/test-empty-pmu-events.c
Signed-off-by: Haiyue Wang <haiyuewa@163.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20241106121254.2869-1-haiyuewa@163.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
event_format__print() last use was removed by 2017's
commit 894f3f1732cb ("perf script: Use event_format__fprintf()")
evlist__find_tracepoint_by_id() last use was removed by 2012's
commit e60fc847cefa ("perf evlist: Remove some unused methods")
evlist__set_tp_filter_pid() last use was removed by 2017's
commit dd1a50377c92 ("perf trace: Introduce filter_loop_pids()")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20241106144826.91728-1-linux@treblig.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
TDX 1.0 defines baseline behaviour of TDX guest platform. TDX 1.0
generates a #VE when accessing topology-related CPUID leafs (0xB and
0x1F) and the X2APIC_APICID MSR. The kernel returns all zeros on CPUID
topology. In practice, this means that the kernel can only boot with a
plain topology. Any complications will cause problems.
The ENUM_TOPOLOGY feature allows the VMM to provide topology
information to the guest. Enabling the feature eliminates
topology-related #VEs: the TDX module virtualizes accesses to
the CPUID leafs and the MSR.
Enable ENUM_TOPOLOGY if it is available.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/all/20241104103803.195705-5-kirill.shutemov%40linux.intel.com
|
|
Memory access #VEs are hard for Linux to handle in contexts like the
entry code or NMIs. But other OSes need them for functionality.
There's a static (pre-guest-boot) way for a VMM to choose one or the
other. But VMMs don't always know which OS they are booting, so they
choose to deliver those #VEs so the "other" OSes will work. That,
unfortunately has left us in the lurch and exposed to these
hard-to-handle #VEs.
The TDX module has introduced a new feature. Even if the static
configuration is set to "send nasty #VEs", the kernel can dynamically
request that they be disabled. Once they are disabled, access to private
memory that is not in the Mapped state in the Secure-EPT (SEPT) will
result in an exit to the VMM rather than injecting a #VE.
Check if the feature is available and disable SEPT #VE if possible.
If the TD is allowed to disable/enable SEPT #VEs, the ATTR_SEPT_VE_DISABLE
attribute is no longer reliable. It reflects the initial state of the
control for the TD, but it will not be updated if someone (e.g. bootloader)
changes it before the kernel starts. Kernel must check TDCS_TD_CTLS bit to
determine if SEPT #VEs are enabled or disabled.
[ dhansen: remove 'return' at end of function ]
Fixes: 373e715e31bf ("x86/tdx: Panic on bad configs that #VE on "private" memory access")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/all/20241104103803.195705-4-kirill.shutemov%40linux.intel.com
|
|
Rename tdx_parse_tdinfo() to tdx_setup() and move setting NOTIFY_ENABLES
there.
The function will be extended to adjust TD configuration.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/all/20241104103803.195705-3-kirill.shutemov%40linux.intel.com
|
|
The TDG_VM_WR TDCALL is used to ask the TDX module to change some
TD-specific VM configuration. There is currently only one user in the
kernel of this TDCALL leaf. More will be added shortly.
Refactor to make way for more users of TDG_VM_WR who will need to modify
other TD configuration values.
Add a wrapper for the TDG_VM_RD TDCALL that requests TD-specific
metadata from the TDX module. There are currently no users for
TDG_VM_RD. Mark it as __maybe_unused until the first user appears.
This is preparation for enumeration and enabling optional TD features.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/all/20241104103803.195705-2-kirill.shutemov%40linux.intel.com
|
