| Age | Commit message (Collapse) | Author |
|---|
|
According to the current kiq read register method,
there will be race condition when using KIQ to read
register if multiple clients want to read at same time
just like the expample below:
1. client-A start to read REG-0 throguh KIQ
2. client-A poll the seqno-0
3. client-B start to read REG-1 through KIQ
4. client-B poll the seqno-1
5. the kiq complete these two read operation
6. client-A to read the register at the wb buffer and
get REG-1 value
Therefore, use amdgpu_device_wb_get() to request reg_val_offs
for each kiq read register.
v2: fix the error remove
v3: fix the print typo
v4: remove unused variables
Signed-off-by: Yintian Tao <yttao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit 6bb0942e8f46863a745489cce27efe5be2a3885e.
Unfortunately it would appear that the rumors we've heard of sideband
message interleaving not being very well supported are true. On the
Lenovo ThinkPad Thunderbolt 3 dock that I have, interleaved messages
appear to just get dropped:
[drm:drm_dp_mst_wait_tx_reply [drm_kms_helper]] timedout msg send
00000000571ddfd0 2 1
[dp_mst] txmsg cur_offset=2 cur_len=2 seqno=1 state=SENT path_msg=1 dst=00
[dp_mst] type=ENUM_PATH_RESOURCES contents:
[dp_mst] port=2
DP descriptor for this hub:
OUI 90-cc-24 dev-ID SYNA3 HW-rev 1.0 SW-rev 3.12 quirks 0x0008
It would seem like as well that this is a somewhat well known issue in
the field. From section 5.4.2 of the DisplayPort 2.0 specification:
There are MST Sink/Branch devices in the field that do not handle
interleaved message transactions.
To facilitate message transaction handling by downstream devices, an
MST Source device shall generate message transactions in an atomic
manner (i.e., the MST Source device shall not concurrently interleave
multiple message transactions). Therefore, an MST Source device shall
clear the Message_Sequence_No value in the Sideband_MSG_Header to 0.
MST Source devices that support field policy updates by way of
software should update the policy to forego the generation of
interleaved message transactions.
This is a bit disappointing, as features like HDCP require that we send
a sideband request every ~2 seconds for each active stream. However,
there isn't really anything in the specification that allows us to
accurately probe for interleaved messages.
If it ends up being that we -really- need this in the future, we might
be able to whitelist hubs where interleaving is known to work-or maybe
try some sort of heuristics. But for now, let's just play it safe and
not use it.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 6bb0942e8f46 ("drm/dp_mst: Remove single tx msg restriction.")
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200423164225.680178-1-lyude@redhat.com
Reviewed-by: Sean Paul <sean@poorly.run>
|
|
Under ideal circumstances, the driver should be able to keep the GPU
fully saturated with work. Measure how close to ideal we get under the
harshest of conditions with no user payload.
v2: Also measure throughput using only one thread.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422074203.9799-1-chris@chris-wilson.co.uk
|
|
intel_gt_wait_for_idle() tries to wait until all the outstanding requests
are retired and the GPU is idle. As a side effect of retiring requests,
we may submit more work to flush any pm barriers, and so the
wait-for-idle tries to flush the background pm work and catch the new
requests. However, if the work completed in the background before we
were able to flush, it would queue the extra barrier request without us
noticing -- and so we would return from wait-for-idle with one request
remaining. (This breaks e.g. record_default_state where we need to wait
until that barrier is retired, and it may slow suspend down by causing
us to wait on the background retirement worker as opposed to immediately
retiring the barrier.)
However, since we track if there has been a submission since the engine
pm barrier, we can very quickly detect if the idle barrier is still
outstanding.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1763
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200423085940.28168-1-chris@chris-wilson.co.uk
|
|
During the virtual engine's submission tasklet, we take the request and
insert into the submission queue on each of our siblings. This seems
quite simply, and so no problems with ordering. However, the sibling
execlists' submission tasklets may run concurrently with the virtual
engine's tasklet, submitting the request to HW before the virtual
finishes its task of telling all the siblings. If this happens, the
sibling tasklet may *reorder* the ve->sibling[] array that the virtual
engine tasklet is processing. This can *only* reorder within the
elements already processed by the virtual engine, nevertheless the
race is detected by KCSAN:
[ 185.580014] BUG: KCSAN: data-race in execlists_dequeue [i915] / virtual_submission_tasklet [i915]
[ 185.580054]
[ 185.580076] write to 0xffff8881f1919860 of 8 bytes by interrupt on cpu 2:
[ 185.580553] execlists_dequeue+0x6ad/0x1600 [i915]
[ 185.581044] __execlists_submission_tasklet+0x48/0x60 [i915]
[ 185.581517] execlists_submission_tasklet+0xd3/0x170 [i915]
[ 185.581554] tasklet_action_common.isra.0+0x42/0x90
[ 185.581585] __do_softirq+0xc8/0x206
[ 185.581613] run_ksoftirqd+0x15/0x20
[ 185.581641] smpboot_thread_fn+0x15a/0x270
[ 185.581669] kthread+0x19a/0x1e0
[ 185.581695] ret_from_fork+0x1f/0x30
[ 185.581717]
[ 185.581736] read to 0xffff8881f1919860 of 8 bytes by interrupt on cpu 0:
[ 185.582231] virtual_submission_tasklet+0x10e/0x5c0 [i915]
[ 185.582265] tasklet_action_common.isra.0+0x42/0x90
[ 185.582291] __do_softirq+0xc8/0x206
[ 185.582315] run_ksoftirqd+0x15/0x20
[ 185.582340] smpboot_thread_fn+0x15a/0x270
[ 185.582368] kthread+0x19a/0x1e0
[ 185.582395] ret_from_fork+0x1f/0x30
[ 185.582417]
We can prevent this race by checking for the ve->request after looking
up the sibling array.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200423115315.26825-1-chris@chris-wilson.co.uk
|
|
Fix the check for when an AUX power well enabling timeout is expected on
a legacy TypeC port.
Fixes: 89e01caac641 ("drm/i915: Use single set of AUX powerwell ops for gen11+")
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422123440.19522-1-imre.deak@intel.com
|
|
In pp_one_vf mode avoid the extra overhead and read/write the
registers without the KIQ.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Acked-by: Yintian Tao <yintian.tao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If set error query ready in amdgpu_ras_late_init, which will
cause some IP blocks aren't initialized, but their error query
is ready.
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Make code more readable.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This is basically just some code cosmetic. The current design
for XGMI setup gput reset is to operate on current device(adev)
first and then on other devices from the hive(by another 'for' loop).
But actually we can do some sort to the device list(to put current
device 1st position) and handle all the devices in a single 'for'
loop.
V2: added missing hive->hive_lock protection
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
As for XGMI setup, it should be performed on other devices
from the hive also.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
As for XGMI setup, it needs to be performed on
all the devices from the same hive.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Make the code a bit more readable by using a common
error handling pattern.
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Reviewed-by: Christian König <christian.koenig@amd.com>.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
clean up unused variable:
1. ring_lru_list
2. ring_lru_list_lock
related-commit:
drm/amdgpu: remove ring lru handling
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Prefix RAS message printing in gfx/mmhub with PCI device info,
which assists the debug in multiple GPU case.
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Under onevf mode the smu support to other chips is not well
verified yet.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
disble vblank in dce_vitual_crtc_commit(), which is skipped
under sriov before
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Jiawei <Jiawei.Gu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This is convenient for multiple teams to obtain the information. Also,
add device info by using dev_info().
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update the smu12_driver_if.h header to follow the pmfw release.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
for different ASIC support different the number of DPM levels,
we should avoid to show the invalid level value.
v1 -> v2:
follow the suggestion,clarifiy the description for this
change
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Yuxian Dai <Yuxian.Dai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Turn off the printing by default because it is not very useful, while
adding more details.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Delete two printings which are not very useful, and change one from
pr_info() to pr_debug().
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
there's a bug in the new logic for panel power control. the check is
wrong, and will skip panel power control under the wrong conditions.
[How]
fix to check for NULL panel_cntl
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Ashley Thomas <Ashley.Thomas2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Current code does not guarantee the correct endianness of memory being
copied to fw, specifically in the case where cpu isn't little endian.
[How]
Windows and Diags are always little endian, so we define a macro that
does nothing. Linux already defines this macro and will do the correct
endianness conversion.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
We have seen a green screen after resume from suspend in a Raven system
connected with two displays (HDMI and DP) on X based system. We noticed
that this issue is related to bad DCC metadata from user space which may
generate hangs and consequently an underflow on HUBP. After taking a
deep look at the code path we realized that after resume we try to
restore the commit with the DCC enabled framebuffer but the framebuffer
is no longer valid.
[how]
This problem was only reported on Raven based system and after suspend,
for this reason, this commit adds a new parameter on
fill_plane_dcc_attributes() to give the option of disabling DCC
programmatically. In summary, for disabling DCC we first verify if is a
Raven system and if it is in suspend; if both conditions are true we
disable DCC temporarily, otherwise, it is enabled.
Co-developed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Commit cdde482caabf2adad47d23f0d1e235db2c4f2b7d is causing regression
from changing the order of call sequence.
[How]
Keep the call sequence and take in extra dm state only if plane-level
color management is enabled.
Fixes: cdde482caabf2a ("drm/amd/display: Refactor color management to take dm plane state")
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Since ABM resource is mapped to stream res, all the ABM access should
via stream res.
[How]
Get ABM instance from stream res instead of resource pool.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
When link loss happened, monitor can not light up if only re-train the
link.
[How]
Blank all the DP streams on this link before re-train the link, and then
unblank the stream
Signed-off-by: Xiaodong Yan <Xiaodong.Yan@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Organizational Unit Identifier register is optional, and its
presence is published via Down Stream Port Count register.
Writing this register when not available will result in errors
[how]
Read this register and continue writing OUI only if the panel
has the support advertised.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
it doesn't represent panel specifically, it's more like the control
logic for the panel
[How]
change from panel to panel cntl to make it a bit more clear
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
HW rotation was enabled in DAL3 but hubp cursor calculations for HW roation
were only added to dcn20.
[How]
Add hubp cursor position calculation changes to dcn10.
Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
We expect to be able to perform immediate flipping without having to
recalculate and update all the watermarks.
There are certain usecases today (1080p @ 90deg, 2160p @ 90deg) such
that we get a urgency value of 0 for frac_urg_bw_flip because we're
explicitly passing in a value of "false" for requiring immediate
flip support into the DLG calculation.
[How]
Always pass in true into the calculation. With this we get a correct
non-zero value for frac_urg_bw_flip.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This prevents dpcd access on virtual links.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
without destroy it is causing a memory leak
[How]
destroy panel on link destruct
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Wyatt Wood <Wyatt.Wood@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Driver already get display clock from SMU base on MHz, but driver read
again and mutiple 1000 cause wait loop value is overflow.
[How]
remove coding error
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
panel power sequencer is currently just sitting in hwseq but it really
it tied to internal panels
[How]
make a new panel struct to contain power sequencer code
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Backlight adjustment is tied to a specific display. So make the calls
target a link rather than making it a global state.
[How]
make all backlight calls link based
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
In certain conditions with low pixel clock, some values in DML may go
past the max due to margining for latency hiding. This causes assertions
to get hit.
[HOW]
If the pixel clock is low and some values are high, cap it to the max.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
- Driver does not recognize new definitions of psr states.
- Internal tool is required for checking if psr is active.
[How]
- Parse psr state correctly so that driver will recognize psr state.
- Add visual confirmation that psr is active using existing mechanisms.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Don't skip MPCC tree updates if requested.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Some cases were incorrectly reporting the wrong visual confirm, even
though they were working as expected.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Color blending for NV12 formats is incorrect because we're using the
predefined SRGB degamma.
[How]
Calculate the correct input transfer function for degamma from the color
module depending on what the actual surface format is.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Zhan Liu <Zhan.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Certain displays may experience blanking if infopacket max range does
not equal nominal refresh rate.
[How]
Add additional infopacket versions to program range to full or forced
range in freesync states.
This does not change the vrr logic.
Signed-off-by: Haiyi Zhou <haiyi.zhou@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
On ASIC without ABM support (most dGPU) we run into a null pointer
dereference when attempting to set the backlight level.
[How]
This function requires ABM, so fix up the condition to only allow
DMCU to be optional.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Wyatt Wood <Wyatt.Wood@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We need to set up stream even with virtual displays when running
diags.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]:
Some inputs to dml_ceil have it dividied by int which causes a
truncation. This loss of precision means the ceil function becomes
redundant and does not round up.
[How]:
Cast parameter to float before division.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]:
Calculating refcyc_per_meta_chunk_vblank_l when DCC is disabled may lead
to a large number causing an assert to get hit. In VBA, this value is 0
when DCC is disabled.
[HOW]:
Set value to 0 to avoid hitting the assert.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Optc needs to know if timing is enabled with ODM or DSC before computing
crc. Otherwise value computed will be inaccurate. Before this change,
the CRC computed without ODM is not equal to the CRC computed with ODM
for the same timing. This is unexpected as we are driving the same
timing despite of the underlaying hardware setup to achieve it. This is
caused by missing hardware programming sequence to support it.
[how]
Add the new programming sequence based on hardware guide.
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Some mst dock can't translate DP to HDMI properly.
[How]
Bypass YCbCr timings on specific MST device.
Signed-off-by: Jinze Xu <jinze.xu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
