summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-12-06uapi glibc compat: fix outer guard of net device flags enumJonas Gorski
Fix a wrong condition preventing the higher net device flags IFF_LOWER_UP etc to be defined if net/if.h is included before linux/if.h. The comment makes it clear the intention was to allow partial definition with either parts. This fixes compilation of userspace programs trying to use IFF_LOWER_UP, IFF_DORMANT or IFF_ECHO. Fixes: 4a91cb61bb99 ("uapi glibc compat: fix compile errors when glibc net/if.h included before linux/if.h") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Mikko Rapeli <mikko.rapeli@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06net/udp: do not touch skb->peeked unless really neededEric Dumazet
In UDP recvmsg() path we currently access 3 cache lines from an skb while holding receive queue lock, plus another one if packet is dequeued, since we need to change skb->next->prev 1st cache line (contains ->next/prev pointers, offsets 0x00 and 0x08) 2nd cache line (skb->len & skb->peeked, offsets 0x80 and 0x8e) 3rd cache line (skb->truesize/users, offsets 0xe0 and 0xe4) skb->peeked is only needed to make sure 0-length packets are properly handled while MSG_PEEK is operated. I had first the intent to remove skb->peeked but the "MSG_PEEK at non-zero offset" support added by Sam Kumar makes this not possible. This patch avoids one cache line miss during the locked section, when skb->len and skb->peeked do not have to be read. It also avoids the skb_set_peeked() cost for non empty UDP datagrams. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06net: stmmac: clear reset value of snps, wr_osr_lmt/snps, rd_osr_lmt before ↵Niklas Cassel
writing WR_OSR_LMT and RD_OSR_LMT have a reset value of 1. Since the reset value wasn't cleared before writing, the value in the register would be incorrect if specifying an uneven value for snps,wr_osr_lmt/snps,rd_osr_lmt. Zero is a valid value for the properties, since the databook specifies: maximum outstanding requests = WR_OSR_LMT + 1. We do not want to change the behavior for existing users when the property is missing. Therefore, default to 1 if the property is missing, since that is the same as the reset value. Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06Merge branch 'hix5hd2_gmac-txsg-reset-clock-control'David S. Miller
Dongpo Li says: ==================== net: hix5hd2_gmac: add tx sg feature and reset/clock control signals The "hix5hd2" is SoC name, add the generic ethernet driver compatible string. The "hisi-gemac-v1" is the basic version and "hisi-gemac-v2" adds the SG/TXCSUM/TSO/UFO features. This patch set only adds the SG(scatter-gather) driver for transmitting, the drivers of other features will be submitted later. Add the MAC reset control signals and clock signals. We make these signals optional to be backward compatible with the hix5hd2 SoC. Changes in v2: - Make the compatible string changes be a separate patch and the most specific string come first than the generic string as advised by Rob. - Make the MAC reset control signals and clock signals optional to be backward compatible with the hix5hd2 SoC. - Change the compatible string and give the clock a specific name in hix5hd2 dts file. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06ARM: dts: hix5hd2: add gmac generic compatible and clock namesDongpo Li
Add gmac generic compatible and clock names. Signed-off-by: Dongpo Li <lidongpo@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06net: hix5hd2_gmac: add reset control and clock signalsDongpo Li
Add three reset control signals, "mac_core_rst", "mac_ifc_rst" and "phy_rst". The following diagram explained how the reset signals work. SoC |----------------------------------------------------- | ------ | | | cpu | | | ------ | | | | | ------------ AMBA bus | | GMAC | | | ---------------------- | | ------------- mac_core_rst | -------------- | | | |clock and |-------------->| mac core | | | | |reset | | -------------- | | | |generator |---- | | | | | ------------- | | ---------------- | | | | ---------->| mac interface | | | | | mac_ifc_rst | ---------------- | | | | | | | | | | | ------------------ | | | |phy_rst | | RGMII interface | | | | | | ------------------ | | | | ---------------------- | |----------|------------------------------------------| | | | ---------- |--------------------- |PHY chip | ---------- The "mac_core_rst" represents "mac core reset signal", it resets the mac core including packet processing unit, descriptor processing unit, tx engine, rx engine, control unit. The "mac_ifc_rst" represents "mac interface reset signal", it resets the mac interface. The mac interface unit connects mac core and data interface like MII/RMII/RGMII. After we set a new value of interface mode, we must reset mac interface to reload the new mode value. The "mac_core_rst" and "mac_ifc_rst" are both optional to be backward compatible with the hix5hd2 SoC. The "phy_rst" represents "phy reset signal", it does a hardware reset on the PHY chip. This reset signal is optional if the PHY can work well without the hardware reset. Add one more clock signal, the existing is MAC core clock, and the new one is MAC interface clock. The MAC interface clock is optional to be backward compatible with the hix5hd2 SoC. Signed-off-by: Dongpo Li <lidongpo@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06net: hix5hd2_gmac: add tx scatter-gather featureDongpo Li
"hisi-gemac-v2" adds the SG/TXCSUM/TSO/UFO features. This patch only adds the SG(scatter-gather) driver for transmitting, the drivers of other features will be submitted later. Signed-off-by: Dongpo Li <lidongpo@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06net: hix5hd2_gmac: add generic compatible stringDongpo Li
The "hix5hd2" is SoC name, add the generic ethernet driver name. The "hisi-gemac-v1" is the basic version and "hisi-gemac-v2" adds the SG/TXCSUM/TSO/UFO features. Signed-off-by: Dongpo Li <lidongpo@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06fuse: fix clearing suid, sgid for chown()Miklos Szeredi
Basically, the pjdfstests set the ownership of a file to 06555, and then chowns it (as root) to a new uid/gid. Prior to commit a09f99eddef4 ("fuse: fix killing s[ug]id in setattr"), fuse would send down a setattr with both the uid/gid change and a new mode. Now, it just sends down the uid/gid change. Technically this is NOTABUG, since POSIX doesn't _require_ that we clear these bits for a privileged process, but Linux (wisely) has done that and I think we don't want to change that behavior here. This is caused by the use of should_remove_suid(), which will always return 0 when the process has CAP_FSETID. In fact we really don't need to be calling should_remove_suid() at all, since we've already been indicated that we should remove the suid, we just don't want to use a (very) stale mode for that. This patch should fix the above as well as simplify the logic. Reported-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Fixes: a09f99eddef4 ("fuse: fix killing s[ug]id in setattr") Cc: <stable@vger.kernel.org> Reviewed-by: Jeff Layton <jlayton@redhat.com>
2016-12-06net: dsa: mv88e6xxx: Use EDSA on mv88e6097Stefan Eichenberger
Use DSA_TAG_PROTO_EDSA as tag_protocol for the mv88e6097. The initialisation was missing before. Fixes: a1f482aa8c33 ("net: dsa: mv88e6xxx: Move the tagging protocol into info") Signed-off-by: Stefan Eichenberger <stefan.eichenberger@netmodule.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06bpf: add additional verifier tests for BPF_PROG_TYPE_LWT_*Thomas Graf
- direct packet read is allowed for LWT_* - direct packet write for LWT_IN/LWT_OUT is prohibited - direct packet write for LWT_XMIT is allowed - access to skb->tc_classid is prohibited for LWT_* Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06tools: hv: Enable network manager for bonding scripts on RHELHaiyang Zhang
We found network manager is necessary on RHEL to make the synthetic NIC, VF NIC bonding operations handled automatically. So, enabling network manager here. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06ASoC: Intel: update bxt_da7219_max98357a to support quad ch dmic captureSathyanarayana Nujella
This patch updates FE channel constraints & BE fixup to support quad channel DMIC capture. DMIC pin's BE fixup is configured based on channel input, i.e. either stereo or quad. Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Signed-off-by: Harsha Priya <harshapriya.n@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-06btrfs: opencode chunk locking, remove helpersDavid Sterba
The helpers are trivial and we don't use them consistently. Signed-off-by: David Sterba <dsterba@suse.com>
2016-12-06btrfs: remove root parameter from transaction commit/end routinesJeff Mahoney
Now we only use the root parameter to print the root objectid in a tracepoint. We can use the root parameter from the transaction handle for that. It's also used to join the transaction with async commits, so we remove the comment that it's just for checking. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-12-06btrfs: split btrfs_wait_marked_extents into normal and tree log functionsJeff Mahoney
btrfs_write_and_wait_marked_extents and btrfs_sync_log both call btrfs_wait_marked_extents, which provides a core loop and then handles errors differently based on whether it's it's a log root or not. This means that btrfs_write_and_wait_marked_extents needs to take a root because btrfs_wait_marked_extents requires one, even though it's only used to determine whether the root is a log root. The log root code won't ever call into the transaction commit code using a log root, so we can factor out the core loop and provide the error handling appropriate to each waiter in new routines. This allows us to eventually remove the root argument from btrfs_commit_transaction, and as a result, btrfs_end_transaction. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-12-06btrfs: take an fs_info directly when the root is not used otherwiseJeff Mahoney
There are loads of functions in btrfs that accept a root parameter but only use it to obtain an fs_info pointer. Let's convert those to just accept an fs_info pointer directly. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-12-06btrfs: simplify btrfs_wait_cache_io prototypeJeff Mahoney
With the exception of the one case where btrfs_wait_cache_io is called without a block group, it's called with the same arguments. The root argument is only used in the special case, so let's factor out the core and simplify the call in the normal case to require a trans, block group, and path. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-12-06btrfs: convert extent-tree tracepoints to use fs_infoJeff Mahoney
The extent-tree tracepoints all operate on the extent root, regardless of which root is passed in. Let's just use the extent root objectid instead. If it turns out that nobody is depending on the format of this tracepoint, we can drop the root printing entirely. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-12-06btrfs: root->fs_info cleanup, access fs_info->delayed_root directlyJeff Mahoney
This results in btrfs_assert_delayed_root_empty and btrfs_destroy_delayed_inode taking an fs_info instead of a root. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-12-06btrfs: root->fs_info cleanup, add fs_info convenience variablesJeff Mahoney
In routines where someptr->fs_info is referenced multiple times, we introduce a convenience variable. This makes the code considerably more readable. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-12-06btrfs: root->fs_info cleanup, update_block_group{,flags}Jeff Mahoney
Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-12-06btrfs: root->fs_info cleanup, lock/unlock_chunksJeff Mahoney
Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-12-06btrfs: root->fs_info cleanup, btrfs_calc_{trans,trunc}_metadata_sizeJeff Mahoney
Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-12-06btrfs: pull node/sector/stripe sizes out of root and into fs_infoJeff Mahoney
We track the node sizes per-root, but they never vary from the values in the superblock. This patch messes with the 80-column style a bit, but subsequent patches to factor out root->fs_info into a convenience variable fix it up again. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-12-06btrfs: root->fs_info cleanup, io_ctl_initJeff Mahoney
The io_ctl->root member was only being used to access root->fs_info. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-12-06btrfs: root->fs_info cleanup, use fs_info->dev_root everywhereJeff Mahoney
Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-12-06btrfs: struct reada_control.root -> reada_control.fs_infoJeff Mahoney
The root is never used. We substitute extent_root in for the reada_find_extent call, since it's only ever used to obtain the node size. This call site will be changed to use fs_info in a later patch. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-12-06btrfs: struct btrfsic_state->root should be an fs_infoJeff Mahoney
The root member is never used except for obtaining an fs_info pointer. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-12-06btrfs: alloc_reserved_file_extent trace point should use extent_rootJeff Mahoney
Even though a separate root is passed in, we're still operating on the extent root. Let's use that for the trace point. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-12-06btrfs: btrfs_init_new_device should use fs_info->dev_rootJeff Mahoney
btrfs_init_new_device only uses the root passed in via the ioctl to start the transaction. Nothing else that happens is related to whatever root the user used to initiate the ioctl. We can drop the root requirement and just use fs_info->dev_root instead. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-12-06btrfs: call functions that always use the same root with fs_info insteadJeff Mahoney
There are many functions that are always called with the same root argument. Rather than passing the same root every time, we can pass an fs_info pointer instead and have the function get the root pointer itself. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-12-06btrfs: call functions that overwrite their root parameter with fs_infoJeff Mahoney
There are 11 functions that accept a root parameter and immediately overwrite it. We can pass those an fs_info pointer instead. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-12-06Merge branch 'nvmf-4.10' of git://git.infradead.org/nvme-fabrics into ↵Jens Axboe
for-4.10/block Sagi writes: The major addition here is the nvme FC transport implementation from James. What else: - some cleanups and memory leak fixes in the host side fabrics code from Bart - possible rcu violation fix from Sasha - logging change from Max - small include cleanup
2016-12-06ASoC: nau8825: disable sinc filter for high THD of ADCJohn Hsu
This bit will enable 4th order SINC filter. =1, filter will enable; but it consumes higher power. =0, the sinc filter is disable, and it should always keep 0 value to get high THD. Therefor, disable the filter when codec initiation for better performance when recording. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-06nvme-fabrics: Add FC LLDD loopback driver to test FC-NVMEJames Smart
Add FC LLDD loopback driver to test FC host and target transport within nvme-fabrics To aid in the development and testing of the lower-level api of the FC transport, this loopback driver has been created to act as if it were a FC hba driver supporting both the host interfaces as well as the target interfaces with the nvme FC transport. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Jay Freyensee <james_p_freyensee@linux.intel.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2016-12-06Merge branch 'kvm-ppc-next' of ↵Radim Krčmář
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc Eliminate merge conflict between 9e5f68842276 and ebe4535fbe7a.
2016-12-06Update Documentation/00-INDEXMauro Carvalho Chehab
Em Mon, 5 Dec 2016 14:23:01 -0700 Jonathan Corbet <corbet@lwn.net> escreveu: > On Mon, 5 Dec 2016 09:41:40 -0200 > Mauro Carvalho Chehab <mchehab@s-opensource.com> wrote: > > > So, in order to check it, I wrote a small script that compares the files > > and directories at Documentation/ with the ones at 00-INDEX. > > > > Then, I synchronized the entries, making the script happy. > > > > We might think on integrating the script with checkpatch.pl, but, as > > we should get rid of 00-INDEX, it probably not worth the efforts. > > I would agree with that; I don't see the point of keeping those files > around in the longer term. > > I've applied the set. I do have a few quibbles with the final patch that > I'll send separately, but they're not something to hold this set up for. Jon, Did a patch fixing the quibbles. As it seems you didn't push yet the changeset upstream, feel free to just fold it with patch 5/5 if you prefer so, or to add as a separate patch at the end of the series. Patch enclosed. Thanks, Mauro [PATCH] docs: 00-INDEX: change text related to the building system Let be clearer on those files related to the build system. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-12-06ALSA: usb-audio: more tolerant packetsizeAndreas Pape
since commit 57e6dae1087b ("ALSA: usb-audio: do not trust too-big wMaxPacketSize values"), the expected packetsize is always limited to nominal + 25%. It was discovered, that some devices (Android audio accessory) have a much higher jitter in used packetsizes than 25% which would result in BABBLE condition and dropping of packets. A better solution is so assume the jitter to be the nominal packetsize: -one nearly empty packet followed by a almost 150% sized one. V2: changed to assume max frequency is +50 of nominal packetsize. Signed-off-by: Andreas Pape <apape@de.adit-jv.com> Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-12-06ALSA: usb-audio: avoid setting of sample rate multiple times on busDaniel Girnus
Some of userland applications call 'snd_pcm_hw_params()' and 'snd_pcm_hw_prepare()' sequentially, which means 'snd_pcm_hw_prepare()' is called twice and the second 'snd_pcm_hw_prepare()' is called in 'SNDRV_PCM_STATE_PREPARED' state. Some devices are not able to manage this and they will stop playback if the sample rate will be configured several times over USB protocol. V2: updated Changelog Signed-off-by: Daniel Girnus <dgirnus@de.adit-jv.com> Signed-off-by: Jens Lorenz <jlorenz@de.adit-jv.com> Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-12-06drm: Don't block the kworker waiting for mode_config.mutex in output_poll()Chris Wilson
If we cannot acquire the mode_config.mutex immediately, just back off and queue a new attempt after the poll interval. This is mostly to stop the hung task spam when the system is deadlocked, but it will also lessen the load (in such extreme cases). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> [danvet:s/lock/mutex/ per Eric's comment.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161206113715.30382-1-chris@chris-wilson.co.uk
2016-12-06drm: Return -ENOTSUPP when called for KMS cap with a non-KMS driverMichel Dänzer
This is an attempt to make the previous fix a bit more robust going forward. v2: * Only allow DRM_CAP_TIMESTAMP_MONOTONIC with UMS drivers (Daniel Vetter, Alex Deucher) * Different logic to keep DRM_CAP_TIMESTAMP_MONOTONIC separate from the other caps (Daniel Vetter) Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161201073731.5716-1-michel@daenzer.net
2016-12-06ASoC: cs35l34: Simplify the logic to set CS35L34_MCLK_CTL settingAxel Lin
The logic of "value = ~CS35L34_MCLK_DIV & CS35L34_MCLK_RATE_XXXXXX;" is unnecessary complex. By setting CS35L34_MCLK_DIV | CS35L34_MCLK_RATE_MASK as the mask for regmap_update_bits() call, what the code does is exactly the same as setting value = CS35L34_MCLK_RATE_XXXXXX. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Paul Handrigan <Paul.Handrigan@cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-06arm: dts: zynq: Add MicroZed board supportJagan Teki
Added basic dts support for MicroZed board. - UART - SDHCI - Ethernet Cc: Soren Brinkmann <soren.brinkmann@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Jagan Teki <jteki@openedev.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-12-06ALSA: hda - Gate the mic jack on HP Z1 Gen3 AiOTakashi Iwai
HP Z1 Gen3 AiO with Conexant codec doesn't give an unsolicited event to the headset mic pin upon the jack plugging, it reports only to the headphone pin. It results in the missing mic switching. Let's fix up by simply gating the jack event. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-12-06Tools: hv: kvp: configurable external scripts pathAlex Fluter
error when running hypervkvpd: $ sudo ./hv_kvp_daemon -n sh: hv_get_dns_info: command not found sh: hv_get_dhcp_info: command not found sh: hv_get_dns_info: command not found sh: hv_get_dhcp_info: command not found The external scripts are not installed in system path, adding a configurable macro. Signed-off-by: Alex Fluter <afluter@yandex.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-06uio-hv-generic: new userspace i/o driver for VMBusStephen Hemminger
This is a new driver to enable userspace networking on VMBus. It is based largely on the similar driver that already exists for PCI, and earlier work done by Brocade to support DPDK. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-06vmbus: add support for dynamic device id'sStephen Hemminger
This patch adds sysfs interface to dynamically bind new UUID values to existing VMBus device. This is useful for generic UIO driver to act similar to uio_pci_generic. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-06hv: change clockevents unbind tacticsVitaly Kuznetsov
To get prepared to CPU offlining support we need co change the way how we unbind clockevent devices. As one CPU may go online/offline multiple times we need to bind it in hv_synic_init() and unbind it in hv_synic_cleanup(). There is an additional corner case: when we unload the module completely we need to switch to some other clockevent mechanism before stopping VMBus or we will hang. We can't call hv_synic_cleanup() before unloading VMBus as we won't be able to send UNLOAD request and get a response so hv_synic_clockevents_cleanup() has to live. Luckily, we can always call clockevents_unbind_device(), even if it wasn't bound before and there is no issue if we call it twice. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-06hv: acquire vmbus_connection.channel_mutex in vmbus_free_channels()Vitaly Kuznetsov
"kernel BUG at drivers/hv/channel_mgmt.c:350!" is observed when hv_vmbus module is unloaded. BUG_ON() was introduced in commit 85d9aa705184 ("Drivers: hv: vmbus: add an API vmbus_hvsock_device_unregister()") as vmbus_free_channels() codepath was apparently forgotten. Fixes: 85d9aa705184 ("Drivers: hv: vmbus: add an API vmbus_hvsock_device_unregister()") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-22 16:54:46 +0000