summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-10-12arm64: dts: ti: k3-j784s4: Add ESM instancesKeerthy
Patch adds the ESM instances for J784s4. It has 3 instances. One in the main domain and two in the mcu-wakeup domain. Signed-off-by: Keerthy <j-keerthy@ti.com> Link: https://lore.kernel.org/r/20231008044657.25788-3-j-keerthy@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-10-12arm64: dts: ti: k3-j721s2: Add ESM instancesKeerthy
Patch adds the ESM instances for J721s2. It has 3 instances. One in the main domain and two in the mcu-wakeup domain. Signed-off-by: Keerthy <j-keerthy@ti.com> Link: https://lore.kernel.org/r/20231008044657.25788-2-j-keerthy@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-10-12Merge tag 'samsung-dt64-6.7' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt Samsung DTS ARM64 changes for v6.7 1. Exynos850: Add support for USB 2.0 (host and device) and enable it on E850-96 board. 2. Exynos5433: Switch sound card to generic audio-routing property, supported since previous release for Samsung drivers. The old samsung,audio-routing property is deprecated. 3. Few cleanups. * tag 'samsung-dt64-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: exynos: remove unused TMU alias arm64: dts: exynos: Use pinctrl macros for exynos5433-tm2 arm64: dts: exynos: exynos5433-tm2: switch sound card to audio-routing arm64: dts: exynos: Enable USB support on E850-96 board arm64: dts: exynos: Enable USB in Exynos850 Link: https://lore.kernel.org/r/20231006093943.106002-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-10-12Merge tag 'dt-cleanup-6.7' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt Minor improvements in ARM DTS for v6.7 Few cleanups and improvements: split joined reg entries for Ethernet in omap3-devkit8000, add missing spaces before '{' (MediaTek, Nuvoton) and cleanup whitespace around '=' (MediaTek). * tag 'dt-cleanup-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt: ARM: dts: nuvoton: add missing space before { ARM: dts: mediatek: minor whitespace cleanup around '=' ARM: dts: mediatek: add missing space before { ARM: dts: omap3-devkit8000: correct ethernet reg addresses (split) Link: https://lore.kernel.org/r/20231006092823.94839-2-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-10-12Merge tag 'dt64-cleanup-6.7' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt Minor improvements in ARM64 DTS for v6.7 Few cleanups and improvements: use lowercase hex for unit addresses (Bitmain), add missing spaces before '{' (APM, MediaTek) and cleanup whitespace around '=' (MediaTek, Marvell). * tag 'dt64-cleanup-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt: arm64: dts: marvell: minor whitespace cleanup around '=' arm64: dts: mediatek: minor whitespace cleanup around '=' arm64: dts: mediatek: add missing space before { arm64: dts: apm: add missing space before { arm64: dts: bitmain: lowercase unit addresses Link: https://lore.kernel.org/r/20231006092823.94839-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-10-12Merge tag 'renesas-dts-for-v6.7-tag1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt Renesas DTS updates for v6.7 - Add PCIe Host and Endpoint support for the R-Car S4-8 SoC and the Renesas Spider development board, - Add FLASH support for the Renesas Genmai and RSK+RZA1 development boards, - Add multi Component sound support for Renesas ULCB development boards equipped with the Shimafuji Kingfisher extension, - Miscellaneous fixes and improvements. * tag 'renesas-dts-for-v6.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: ulcb/kf: Use multi Component sound ARM: dts: renesas: rskrza1: Add FLASH nodes ARM: dts: renesas: genmai: Add FLASH nodes ARM: dts: renesas: wheat: Move Ethernet node to LBSC ARM: dts: renesas: blanche: Move Ethernet node to LBSC ARM: dts: renesas: marzen: Move Ethernet node to LBSC ARM: dts: renesas: r8a7792: Add LBSC node ARM: dts: renesas: r8a7779: Add LBSC node ARM: dts: renesas: r7s72100: Add BSC node ARM: dts: renesas: Remove unused LBSC nodes from board DTS arm64: dts: renesas: r8a779f0: spider: Enable PCIe Host ch0 arm64: dts: renesas: r8a779f0: Add PCIe Host and Endpoint nodes ARM: dts: renesas: gr-peach: Remove unneeded probe-type property ARM: dts: renesas: ape6evm: Drop bogus "mtd-rom" compatible value ARM: dts: renesas: blanche: Fix typo in GP_11_2 pin name arm64: dts: renesas: Handle ADG bit for sound clk_i Link: https://lore.kernel.org/r/cover.1695985427.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-10-12Merge tag 'renesas-dt-bindings-for-v6.7-tag1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt Renesas DT binding updates for v6.7 - Document support for the new RZ/G3S (R9A08G045) SoC variants. * tag 'renesas-dt-bindings-for-v6.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: dt-bindings: soc: renesas: renesas,rzg2l-sysc: Document RZ/G3S SoC dt-bindings: soc: renesas: Document Renesas RZ/G3S SoC variants Link: https://lore.kernel.org/r/cover.1695985425.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-10-12arm64: dts: imx8mp: Drop i.MX8MP DHCOM rev.100 PHY address workaround from ↵Marek Vasut
PDK3 DT In case the i.MX8MP DHCOM rev.100 has been populated on the PDK3 carrier board, the on-SoM PHY PHYAD1 signal has been pulled high by the carrier board and changed the PHY MDIO address from 5 to 7. This has been fixed on production rev.200 SoM by additional buffer on the SoM PHYAD/LED signals, remove the workaround. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-12arm64: dts: imx8mp: Update i.MX8MP DHCOM SoM DT to production rev.200Marek Vasut
The current imx8mp-dhcom-som.dtsi describes prototype rev.100 SoM, update the DT to describe production rev.200 SoM which brings the following changes: - Fast SoC GPIOs exposed on the SoM edge connector - Slow GPIOs like component resets moved to I2C GPIO expander - ADC upgraded from TLA2024 to ADS1015 with conversion interrupt - EEPROM size increased from 256 B to 4 kiB Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-12arm64: dts: imx8mp: Add UART1 and RTC wake up source on DH i.MX8M Plus DHCOM SoMMarek Vasut
Turn Console UART1 and dedicated RTC into wake up sources, to make it possible to wake on UART and RTC alarm. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-12arm64: dts: imx8mp: Switch WiFI enable signal to mmc-pwrseq-simple on ↵Marek Vasut
i.MX8MP DHCOM SoM The reset-gpio is connected to WL_REG_EN signal of the WiFi MAC, the mmc-pwrseq-simple driver is better suited to operate this signal as it is tied to the slot instead of the MAC, and it can enable the MAC before the brcmfmac driver binds to it. Make use of the MMC power sequencer. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-12arm64: dts: imx8mp: Fix property indent on DH i.MX8M Plus DHCOM PDK3Marek Vasut
Fix indent to use tab indent. No functional change. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-12arm64: dts: imx8mp: Describe VDD_ARM run and standby voltage for DH i.MX8M ↵Marek Vasut
Plus DHCOM SoM Describe VDD_ARM (BUCK2) run and standby voltage in DT. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-12arm64: dts: imx8mp: Describe VDD_ARM run and standby voltage for Data Modul ↵Marek Vasut
i.MX8M Plus eDM SBC Describe VDD_ARM (BUCK2) run and standby voltage in DT. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-12riscv: dts: starfive: visionfive 2: correct spi's ss pinNam Cao
The ss pin of spi0 is the same as sck pin. According to the visionfive 2 documentation, it should be pin 49 instead of 48. Fixes: 74fb20c8f05d ("riscv: dts: starfive: Add spi node and pins configuration") Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2023-10-12arm64: dts: ti: k3-j784s4-main: Add BCDMA instance for CSI2RXVaishnav Achath
J784S4 has a dedicated BCDMA controller for the Camera Serial Interface. Events from the BCDMA controller instance are routed through the main UDMA interrupt aggregator as unmapped events. Add the node for the DMA controller and keep it disabled by default. See J784S4 Technical Reference Manual (SPRUJ52) for further details: http://www.ti.com/lit/zip/spruj52 Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Reviewed-by: Jayesh Choudhary <j-choudhary@ti.com> Link: https://lore.kernel.org/r/20231010111723.17524-3-vaishnav.a@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-10-12arm64: dts: ti: k3-j721s2-main: Add BCDMA instance for CSI2RXVaishnav Achath
J721S2 has a dedicated BCDMA controller for the Camera Serial Interface. Events from the BCDMA controller instance are routed through the main UDMA interrupt aggregator as unmapped events. Add the node for the DMA controller and keep it disabled by default. See J721S2 Technical Reference Manual (SPRUJ28) for further details: http://www.ti.com/lit/pdf/spruj28 Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Reviewed-by: Jayesh Choudhary <j-choudhary@ti.com> Link: https://lore.kernel.org/r/20231010111723.17524-2-vaishnav.a@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-10-12arm64: dts: ti: k3-*: Convert NAVSS to simple-busVignesh Raghavendra
"simple-mfd" as standalone compatible is frowned upon, so model main and MCU NAVSS (Navigator SubSystem) nodes as simple-bus as there is really no need for these nodes to be MFD. Link: https://lore.kernel.org/r/20231005151302.1290363-3-vigneshr@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-10-12arm64: dts: ti: k3-*: Convert DMSS to simple-busVignesh Raghavendra
"simple-mfd" as standalone compatible is frowned upon, so model DMSS (Data Movement Subsystem) node as simple-bus as there is really no need for these nodes to be MFD. Link: https://lore.kernel.org/r/20231005151302.1290363-2-vigneshr@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-10-12arm64: dts: rockchip: Remove duplicate regulator vcc3v3_wf from rock-5bTamás Szűcs
Regulator for VCC3V3_WF has been added as vcc3v3_pcie2x1l0 first. Clean this up. Fixes: 1c9a53ff7ece ("arm64: dts: rockchip: Add sdio node to rock-5b") Signed-off-by: Tamás Szűcs <tszucs@protonmail.ch> Link: https://lore.kernel.org/r/20231011181757.58047-1-tszucs@protonmail.ch Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-10-12arm64: dts: rockchip: Add QuartzPro64 SBC device treeOndrej Jirman
QuartzPro64 dev board features: - RK3588 SoC - 16 GiB LPDDR4 RAM - 2x RK806 PMIC - RTC chip - eMMC, uSD card interface - 2x GMAC (one is PCIe connected) - SATA port - 2x USB 2.0 host only ports - 1x usb 3.0 host only port - 1x Type-C port (USB 3.0 + Alt-DP), TCPM support - 1x PCIe 3.0 4x slot - Audio codec (ES8388) + power amps - WiFi/Bluetooth - Power and work LEDs - 4 adc ladder buttons, 1 power button, 1 maskrom button Signed-off-by: Ondrej Jirman <megi@xff.cz> Link: https://lore.kernel.org/r/20231011215856.2082241-3-megi@xff.cz Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-10-12dt-bindings: arm: rockchip: Add Pine64 QuarzPro64Ondrej Jirman
Add devicetree binding documentation for Pine64 QuartzPro64 SBC. Signed-off-by: Ondrej Jirman <megi@xff.cz> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231011215856.2082241-2-megi@xff.cz Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-10-10ARM: tegra: Drop unit-address from parallel RGB output portMaxim Schwalm
Fix the following W=1 build warning: "Warning (unit_address_vs_reg): /host1x@50000000/dc@54200000/rgb/port@0: node has a unit name, but no reg or ranges property" Signed-off-by: Maxim Schwalm <maxim.schwalm@gmail.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-10-10dt-bindings: arm: tegra: pmc: Relicense and move into soc/tegra directoryThierry Reding
Dual-license this binding for consistency with other Tegra bindings and move it into the soc/tegra directory. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-10-10dt-bindings: arm: tegra: pmc: Reformat exampleThierry Reding
Reformat the example using 4 spaces for indentation. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-10-10dt-bindings: arm: tegra: pmc: Restructure pad configuration node schemaThierry Reding
The pad configuration node schema in its current form can accidentally match other properties as well. Restructure the schema to better match how the device trees are using these. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-10-10dt-bindings: arm: tegra: pmc: Increase maximum number of clocks per powergateThierry Reding
Some powergate definitions need more than 8 clocks, so bump the number up to 10, which is the current maximum in any known device tree file. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-10-10dt-bindings: arm: tegra: pmc: Move additionalPropertiesThierry Reding
For indented subschemas it can be difficult to understand which block an additionalProperties property belongs to. Moving it closer to the beginning of a block is a good way to clarify this. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-10-10dt-bindings: arm: tegra: pmc: Remove useless boilerplate descriptionsThierry Reding
The descriptions for the clocks and resets properties are no longer useful in the context of json-schema, so drop them. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-10-10dt-bindings: arm: tegra: pmc: Improve property descriptionsThierry Reding
Reformat the description of various properties to make them more consistent with existing ones. Make use of json-schema's ability to provide a description for individual list items to make improve the documentation further. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-10-10arm64: tegra: Mark Tegra234 SPI as compatible with Tegra114Thierry Reding
According to the bindings, both Tegra210 and Tegra114 compatible strings need to be specified since the version of this hardware block found in Tegra210 is backwards-compatible. Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-10-10arm64: tegra: Add dmas and dma-names for Tegra234 UARTEThierry Reding
Commit 940acdac99b2 ("arm64: tegra: Add UARTE device tree node on Tegra234") added the device tree node for the UARTE on Tegra234 but didn't include the "dmas" and "dma-names" properties required for this device when it's used in high-speed mode. Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-10-10arm64: tegra: Use correct format for clocks propertyThierry Reding
phandle and clock specifier pairs should be enclosed in angular brackets. Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-10-10arm64: tegra: Remove duplicate nodes on Jetson Orin NXThierry Reding
The SBSA UART and TCU as well as the TCU alias and the stdout-path are configured via the P3768 carrier board DTS include, so the can be removed from the system DTS file. Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-10-10arm64: tegra: Add missing current-speed for SBSA UARTThierry Reding
The SBSA UART device tree bindings require a current-speed property that specifies the baud rate configured by the firmware. Add it on Jetson AGX Orin and Jetson Orin Nano/NX. Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-10-10arm64: tegra: Add display panel node on SmaugDiogo Ivo
The Google Pixel C has a JDI LPM102A188A display panel, so add a DT node for it. Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt> Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-10-10arm64: tegra: Add backlight node on SmaugDiogo Ivo
The Google Pixel C has a TI LP8557 backlight controller, so add a DT node for it. Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt> Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-10-10arm64: tegra: Add DSI/CSI regulator on SmaugDiogo Ivo
Add the node for the DSI/CSI regulator in the Pixel C. Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt> Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-10-10arm64: tegra: Enable IOMMU for host1x on Tegra132Rayyan Ansari
Add the iommu property to the host1x node to register it with its swgroup. Signed-off-by: Rayyan Ansari <rayyan@ansari.sh> Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-10-10arm64: tegra: Fix P3767 QSPI speedBrad Griffis
The QSPI device used on Jetson Orin NX and Nano modules (p3767) is the same as Jetson AGX Orin (p3701) and should have a maximum speed of 102 MHz. Fixes: 13b0aca303e9 ("arm64: tegra: Support Jetson Orin NX") Signed-off-by: Brad Griffis <bgriffis@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-10-10arm64: tegra: Fix P3767 card detect polarityBrad Griffis
The SD card detect pin is active-low on all Orin Nano and NX SKUs that have an SD card slot. Fixes: 13b0aca303e9 ("arm64: tegra: Support Jetson Orin NX") Signed-off-by: Brad Griffis <bgriffis@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-10-10ARM: dts: imx7d-pico-pi: Disable USDHC1Fabio Estevam
The imx7d-pico-pi board does not have an SD card slot connected to the USDHC1 port. Only eMMC and Wifi SDIO ports are used. Disable the USDHC1 node. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10ARM: dts: imx28: Fix dcp compatibleFabio Estevam
Per fsl-dcp.yaml, passing "fsl,imx28-dcp", "fsl,imx23-dcp" is not valid. Change it to pass only "fsl,imx28-dcp" to fix the following schema warning: crypto@80028000: compatible: 'oneOf' conditional failed, one must be fixed: ['fsl,imx28-dcp', 'fsl,imx23-dcp'] is too long 'fsl,imx28-dcp' is not one of ['fsl,imx6sl-dcp', 'fsl,imx6ull-dcp'] 'fsl,imx28-dcp' was expected Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10ARM: dts: imx7s: Remove #power-domain-cells from gpcv2Fabio Estevam
Per fsl,imx-gpcv2.yaml, '#power-domain-cells' is not a valid property for the top-level gpcv2 node. It is only valid for its children nodes. Remove it to fix the following schema warning: gpc@303a0000: '#power-domain-cells' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/power/fsl,imx-gpcv2.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10ARM: dts: imx25: Remove clock-names from the watchdogFabio Estevam
Per fsl-imx-wdt, 'clock-names' is not a valid property. Remove it to fix the following schema warning: watchdog@53fdc000: Unevaluated properties are not allowed ('clock-names' was unexpected) from schema $id: http://devicetree.org/schemas/watchdog/fsl-imx-wdt.yaml Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10ARM: dts: imx25: Fix sram nodeFabio Estevam
Per sram.yaml, address-cells, size-cells and ranges are mandatory. Pass them to fix the following schema warnings: sram@78000000: '#address-cells' is a required property from schema $id: http://devicetree.org/schemas/sram/sram.yaml# sram@78000000: '#size-cells' is a required property from schema $id: http://devicetree.org/schemas/sram/sram.yaml# sram@78000000: 'ranges' is a required property from schema $id: http://devicetree.org/schemas/sram/sram.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10ARM: dts: imx25: Fix dryice nodeFabio Estevam
Per imxdi-rtc.yaml, there is only one valid compatible entry and clock-names is not a valid property. Change it to fix the following schema warnings: dryice@53ffc000: compatible: ['fsl,imx25-dryice', 'fsl,imx25-rtc'] is too long from schema $id: http://devicetree.org/schemas/rtc/imxdi-rtc.yaml# dryice@53ffc000: 'clock-names' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/rtc/imxdi-rtc.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10ARM: dts: imx6qdl-gw5904: add dt props for populating eth MAC addrsTim Harvey
Add device-tree props to allow boot firmware to populate MAC addresses. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10ARM: dts: vfxxx: Write dmas in a single lineFabio Estevam
There is no need to split dmas in two lines. Make it more readable by writing it in a single line. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10arm64: dts: imx8mp-beacon: Add DMIC supportAdam Ford
The baseboard has a connector for a pulse density microphone. This is connected via the micfil interface and uses the DMIC audio codec with the simple-audio-card. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-15 17:28:42 +0000