summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-10-02arm64: dts: ti: k3-am654-base-board: Add I2C I/O expanderRavi Gunasekaran
AM654 baseboard has two TCA9554 I/O expander on the WKUP_I2C0 bus. The expander at address 0x38 is used to detect daughter cards. Add a node for this I/O expander. Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com> Reviewed-by: Andrew Davis <afd@ti.com> Link: https://lore.kernel.org/r/20230920053834.21399-1-r-gunasekaran@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-10-02arm64: dts: ti: phycore-am64: Add RTC interrupt pinWadim Egorov
Wth commit 16b26f602758 ("rtc: rv3028: Use IRQ flags obtained from device tree if available") we can now use the interrupt pin of the RTC. Let's add interrupt pin definitions to the SoM RTC. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Link: https://lore.kernel.org/r/20230914093027.3901602-1-w.egorov@phytec.de Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-10-02arm64: dts: ti: k3-am64: Fix indentation in watchdog nodesWadim Egorov
Use single instead of double tab. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Link: https://lore.kernel.org/r/20230912133036.257277-1-w.egorov@phytec.de Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-10-02arm64: dts: ti: k3-j721s2-evm-gesi: Specify base dtb for overlay fileSiddharth Vadapalli
Specify the base dtb file k3-j721s2-common-proc-board.dtb on which the k3-j721s2-evm-gesi-exp-board.dtbo overlay has to be applied. Name the resulting dtb as k3-j721s2-evm.dtb. Fixes: cac04e27f093 ("arm64: dts: ti: k3-j721s2: Add overlay to enable main CPSW2G with GESI") Reported-by: Rob Herring <robh+dt@kernel.org> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Link: https://lore.kernel.org/r/20230912043308.20629-1-s-vadapalli@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-10-02arm64: dts: ti: k3-am642-sk: Add boot phase tags markingNishanth Menon
bootph-all as phase tag was added to dt-schema (dtschema/schemas/bootph.yaml) to describe various node usage during boot phases with DT. Describe the same for AM642-sk boot devices. Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20230911172902.1057417-4-nm@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-10-02arm64: dts: ti: k3-am642-evm: Add boot phase tags markingNishanth Menon
bootph-all as phase tag was added to dt-schema (dtschema/schemas/bootph.yaml) to describe various node usage during boot phases with DT. Describe the same for AM642-evm boot devices. Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20230911172902.1057417-3-nm@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-10-02arm64: dts: ti: k3-am64: Add phase tags markingNishanth Menon
bootph-all as phase tag was added to dt-schema (dtschema/schemas/bootph.yaml) to describe various node usage during boot phases with DT. On TI K3 AM642 SoC, only esm nodes are exclusively used by R5 bootloader, rest of the dts nodes with bootph-* are used by later boot stages also. Add bootph-all for all other nodes that are used in the bootloader on K3 AM642 SoC, and bootph-pre-ram is not needed specifically for any other node in kernel dts. Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20230911172902.1057417-2-nm@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-10-02arm64: dts: ti: k3-am625-sk: Add boot phase tags markingNishanth Menon
bootph-all as phase tag was added to dt-schema (dtschema/schemas/bootph.yaml) to describe various node usage during boot phases with DT. Describe the same for am625-sk boot devices. Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20230911162535.1044560-4-nm@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-10-02arm64: dts: ti: k3-am625-beagleplay: Add boot phase tags markingNishanth Menon
bootph-all as phase tag was added to dt-schema (dtschema/schemas/bootph.yaml) to describe various node usage during boot phases with DT. Describe the same for beagleplay boot devices. Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20230911162535.1044560-3-nm@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-10-02arm64: dts: ti: k3-am625: Add boot phase tags markingNishanth Menon
bootph-all as phase tag was added to dt-schema (dtschema/schemas/bootph.yaml) to describe various node usage during boot phases with DT. On TI K3 AM625 SoC, only secure_proxy_sa3 and esm nodes are exclusively used by R5 bootloader, rest of the dts nodes with bootph-* are used by later boot stages also. Add bootph-all for all other nodes that are used in the bootloader on K3 AM625 SoC, and bootph-pre-ram is not needed specifically for any other node in kernel dts. Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20230911162535.1044560-2-nm@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-10-02arm64: dts: ti: verdin-am62: add iw416 based bluetoothMarcel Ziswiler
Add NXP IW416 based u-blox MAYA-W1 Bluetooth (using btnxpuart) as used on the V1.1 SoMs. Wi-Fi is and was already using mwifiex. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Link: https://lore.kernel.org/r/20230901133233.105546-1-marcel@ziswiler.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-10-02arm64: dts: meson-s4: add hwrng nodeAlexey Romanov
Using this node, we can obtain random numbers via hardware random number generator. Signed-off-by: Alexey Romanov <avromanov@sberdevices.ru> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230929102942.67985-4-avromanov@salutedevices.com [narmstrong: fixed commit message] Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-10-02dt-bindings: pwm: rockchip: Document rv1126-pwmJagan Teki
Document pwm compatible for rv1126 which is fallback compatible of rk3328-pwm group. Signed-off-by: Jagan Teki <jagan@edgeble.ai> Acked-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230731103518.2906147-2-jagan@edgeble.ai Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-09-30riscv: dts: starfive: add assigned-clock* to limit frquencyWilliam Qiu
In JH7110 SoC, we need to go by-pass mode, so we need add the assigned-clock* properties to limit clock frquency. Signed-off-by: William Qiu <william.qiu@starfivetech.com> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2023-09-29ARM: dts: at91: sam9x60_curiosity: Add mandatory dt property for RTTTudor Ambarus
atmel,rtt-rtc-time-reg is a mandatory property and encodes the GPBR register used to store the time base when the RTT is used as an RTC. Align the RTT with what's currently done for sam9x60ek and sama7g5ek, and enable it by default even if RTC is also enabled. Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> [nicolas.ferre@microchip.com: adapt to newer kernel] Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20230928143644.208515-1-nicolas.ferre@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2023-09-29ARM: dts: sunxi: add support for Anbernic RG-NanoChris Morgan
The Anbernic RG-Nano is a small portable game device based on the Allwinner V3s SoC. It has GPIO buttons on the face and side for input, a single mono speaker, a 240x240 SPI controlled display, a USB-C OTG port, an SD card slot for booting, and 64MB of RAM included in the SoC. There does not appear to be a crystal feeding the internal RTC so it does not keep proper time (for me it ran 8 hours slow in a 24 hour period). External RTC works just fine. Working/Tested: - SDMMC - UART (for debugging) - Buttons - Charging/battery/PMIC - Speaker - RTC (external RTC) - USB - Display Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20230929144441.3409-5-macroalpha82@gmail.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-09-29dt-bindings: arm: sunxi: add Anbernic RG-NanoChris Morgan
The Anbernic RG-Nano is a portable handheld console from Anbernic which uses the Allwinner V3s SoC. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Link: https://lore.kernel.org/r/20230929144441.3409-4-macroalpha82@gmail.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-09-29ARM: dts: sun8i: v3s: add EHCI and OHCI to v3s dtsChris Morgan
Add the EHCI and OHCI controller to the Allwinner v3s to support using USB in host mode. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20230929144441.3409-3-macroalpha82@gmail.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-09-29arm: dts: sun8i: V3s: Add pinctrl for pwmChris Morgan
Add pinctrl nodes for pwm0 and pwm1. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20230929144441.3409-2-macroalpha82@gmail.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-09-29ARM: dts: stm32: omit unused pinctrl groups from stm32mp15 dtb filesSascha Hauer
stm32mp15-pinctrl.dtsi contains nearly all pinctrl groups collected from all boards. Most of them end up unused by a board and only waste binary space. Add /omit-if-no-ref/ to the groups to scrub the unused groups from the dtbs. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-09-29ARM: dts: stm32: stm32f7-pinctrl: don't use multiple blank linesDario Binacchi
The patch fixes the following warning: arch/arm/dts/stm32f7-pinctrl.dtsi:380: check: Please don't use multiple blank lines Fixes: ba287d1a0137 ("ARM: dts: stm32: add pin map for LTDC on stm32f7") Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reviewed-by: Raphaël Gallais-Pou <raphael.gallais-pou@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-09-29ARM: dts: stm32: add HASH on stm32mp131Lionel Debieve
Add the HASH support on stm32mp131. Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com> Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-09-29arm64: dts: st: enable secure arm-wdt watchdog on stm32mp257f-ev1Alexandre Torgue
Enable the watchdog and define the default timeout to 32 seconds. Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-09-29ARM: dts: at91: sama5d29_curiosity: Add device tree for sama5d29_curiosity boardMihai Sain
Add initial device tree file for sama5d29_curiosity board. Signed-off-by: Mihai Sain <mihai.sain@microchip.com> Link: https://lore.kernel.org/r/20230919124606.26898-3-mihai.sain@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2023-09-29dt-bindings: ARM: at91: Document Microchip SAMA5D29 CuriosityAndrei Simion
Document device tree binding of SAMA5D29 Curiosity, from Microchip. Signed-off-by: Andrei Simion <andrei.simion@microchip.com> Signed-off-by: Mihai Sain <mihai.sain@microchip.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230919124606.26898-2-mihai.sain@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2023-09-29arm64: dts: meson: g12: name spdifout consistentlyJerome Brunet
g12 and sm1 are fairly similar when it comes to audio. Both have 2 spdif outputs. While the 2nd output is named "spdifout_b" for both, the 1st one is named 'spdifout' for g12 and 'spdifout_a' for sm1. Use 'spdifout_a' for both instead. This change does not fix any particular problem. The intent is just to make it easier to have a common card definitions for platform designs using both SoC families, when spdifout is used. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20230925135326.1689396-1-jbrunet@baylibre.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-09-29arm64: dts: Add pinctrl node for Amlogic T7 SoCsHuqiang Qin
Add pinctrl device. Signed-off-by: Huqiang Qin <huqiang.qin@amlogic.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Tested-by: Lucas Tanure <tanure@linux.com> Link: https://lore.kernel.org/r/20230922094342.637251-4-huqiang.qin@amlogic.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-09-28Merge tag 'ux500-dts-for-armsoc' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into soc/dt Ux500 device tree updates for v6.7: - Two fixes from Krzysztof fixing up DT properties on the touchscreen. * tag 'ux500-dts-for-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: st: href-tvk1281618: correct touchscreen syna,nosleep-mode ARM: dts: st: href-tvk1281618: fix touchscreen VIO supply Link: https://lore.kernel.org/r/CACRpkdZc5Yzsos2+gRPtCT-+ohmaV69ew5YFJLakD+9VFkrkfQ@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-09-28arm64: dts: Add AMD Pensando Elba SoC supportBrad Larson
Add AMD Pensando common and Elba SoC specific device nodes Signed-off-by: Brad Larson <blarson@amd.com> Link: https://lore.kernel.org/r/20230925195610.47971-5-blarson@amd.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-09-28dt-bindings: arm: add AMD Pensando boardsBrad Larson
Document the compatible for AMD Pensando Elba SoC boards. Signed-off-by: Brad Larson <blarson@amd.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230925195610.47971-2-blarson@amd.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-09-27ARM: dts: qcom: ipq8064: move keys and leds out of soc nodeKrzysztof Kozlowski
GPIO keys and LEDs are not part of the SoC, so move them to top-level to fix dtbs_check warnings like: qcom-ipq8064-rb3011.dtb: soc: gpio-keys: {'compatible': ['gpio-keys'], ... should not be valid under {'type': 'object'} from schema $id: http://devicetree.org/schemas/simple-bus.yaml# Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230924183914.51414-4-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-27ARM: dts: qcom: mdm9615: populate vsdcc fixed regulatorKrzysztof Kozlowski
Fixed regulator put under "regulators" node will not be populated, unless simple-bus or something similar is used. Drop the "regulators" wrapper node to fix this. Fixes: 2c5e596524e7 ("ARM: dts: Add MDM9615 dtsi") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230924183914.51414-3-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-27ARM: dts: qcom: apq8060: drop incorrect regulator-typeKrzysztof Kozlowski
regulator-fixed does not have a "regulator-type" property: qcom-apq8060-dragonboard.dtb: regulator-fixed: Unevaluated properties are not allowed ('regulator-type' was unexpected) Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230924183914.51414-2-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-27ARM: dts: qcom: apq8064: drop incorrect regulator-typeKrzysztof Kozlowski
regulator-fixed does not have a "regulator-type" property: qcom-apq8064-ifc6410.dtb: regulator-ext-3p3v: Unevaluated properties are not allowed ('regulator-type' was unexpected) Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230924183914.51414-1-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-27ARM: dts: qcom: sdx65: fix SDHCI clocks orderKrzysztof Kozlowski
Bindings expect clocks to be in different order: qcom-sdx65-mtp.dtb: mmc@8804000: clock-names:0: 'iface' was expected qcom-sdx65-mtp.dtb: mmc@8804000: clock-names:1: 'core' was expected Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230924183335.49961-2-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-27ARM: dts: qcom: apq8064: drop label property from DSIKrzysztof Kozlowski
DSI node does not accept nor use "label" property: qcom-apq8064-asus-nexus7-flo.dtb: dsi@4700000: Unevaluated properties are not allowed ('label' was unexpected) Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230924183335.49961-1-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-27ARM: qcom: msm8974: Add rpm-master-stats nodeMatti Lehtimäki
Add rpm-master-stats node for MSM8974 and the required RPM MSG RAM slices for memory access. Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com> Reviewed-by: Luca Weiss <luca@z3ntu.xyz> Link: https://lore.kernel.org/r/20230922003533.107835-3-matti.lehtimaki@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-27ARM: qcom: msm8226: Add rpm-master-stats nodeMatti Lehtimäki
Add rpm-master-stats node for MSM8226 and the required RPM MSG RAM slices for memory access. Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com> Reviewed-by: Luca Weiss <luca@z3ntu.xyz> Link: https://lore.kernel.org/r/20230922003533.107835-2-matti.lehtimaki@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-27ARM: dts: qcom: apq8026-samsung-matisse-wifi: Fix inverted hall sensorMatti Lehtimäki
Fix hall sensor GPIO polarity and also allow disabling the sensor. Remove unneeded interrupt. Fixes: f15623bda1dc ("ARM: dts: qcom: Add support for Samsung Galaxy Tab 4 10.1 (SM-T530)") Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com> Reviewed-by: Luca Weiss <luca@z3ntu.xyz> Link: https://lore.kernel.org/r/20230922011211.115234-1-matti.lehtimaki@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-27arm64: dts: qcom: apq8016-sbc: Add missing ADV7533 regulatorsStephan Gerhold
Add the missing regulator supplies to the ADV7533 HDMI bridge to fix the following dtbs_check warnings. They are all also supplied by pm8916_l6 so there is no functional difference. apq8016-sbc.dtb: bridge@39: 'dvdd-supply' is a required property apq8016-sbc.dtb: bridge@39: 'pvdd-supply' is a required property apq8016-sbc.dtb: bridge@39: 'a2vdd-supply' is a required property from schema display/bridge/adi,adv7533.yaml Fixes: 28546b095511 ("arm64: dts: apq8016-sbc: Add HDMI display support") Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230922-db410c-adv7533-regulators-v1-1-68aba71e529b@gerhold.net Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-27dt-bindings: power: qcom,rpmpd: Add SM7150Danila Tikhonov
Add a compatible for SM7150 platforms. Signed-off-by: Danila Tikhonov <danila@jiaxyga.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230916175952.178611-2-danila@jiaxyga.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-09-26ARM: dts: omap: omap4-embt2ws: Let IMU driver handle Magnetometer internallyAndreas Kemnade
Possibility to use the i2c gate is only for compatibility reasons, so avoid messing around with additional i2c busses. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Message-ID: <20230924222718.2038849-1-andreas@kemnade.info> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-09-26ARM: dts: am335x-pocketbeagle: add missing GPIO muxTrevor Woerner
Add the default MODE setting of a GPIO pin that was missing from the device tree (i.e. P2.20/gpio2_00). This is to ensure the GPIO pins match the pocketbeagle wiring expectations. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Message-ID: <20230822143051.7640-5-twoerner@gmail.com> [tony@atomide.com: leave out extra line break] Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-09-26ARM: dts: am335x-pocketbeagle: enable pruTrevor Woerner
Now that the PRU code is upstream and can be loaded via remoteproc, adjust the device tree to enable it and adjust the pin muxing so that the default setting of the pins matches what's is given on the silkscreen and/or pocketbeagle wiring. Caveat: In most cases, the silkscreen will indicate, for example, "PRU0.7", but it doesn't indicate whether that pin should be enabled for input or output. On the PRU a different MODE is used for input versus output. So it is unclear which mode to enable (MODE5 = output, MODE6 = input). In cases where there is a choice (PRU1.11, PRU0.7, PRU0.4, PRU0.1, PRU1.10, PRU0.6, PRU0.3, PRU0.2, and PRU0.5) output is assumed (MODE5). The remaining PRU silkscreen pins do not have a choice and are set as follows: PRU0.16 MODE5 input PRU0.15i MODE6 input Signed-off-by: Trevor Woerner <twoerner@gmail.com> Message-ID: <20230822143051.7640-4-twoerner@gmail.com> [tony@atomide.com: formatted description to fit 75 characters] Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-09-26ARM: dts: am335x-pocketbeagle: remove dependency cycleTrevor Woerner
Remove the self-referenceing "pinctrl-0" entry inside the pinmux clause. This eliminates the set of boot messages (one for each referenced pin) similar to the following: platform 44e10800.pinmux: Fixed dependency cycle(s) with /ocp/interconnect@44c00000/segment@200000/target-module@10000/scm@0/pinmux@800/pinmux_P2_17_gpio Signed-off-by: Trevor Woerner <twoerner@gmail.com> Message-ID: <20230822143051.7640-3-twoerner@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-09-26ARM: dts: am335x-pocketbeagle: update LED informationTrevor Woerner
Add the "color" and "description" properties. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Message-ID: <20230822143051.7640-2-twoerner@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-09-26ARM: dts: omap4: embt2ws: add LEDAndreas Kemnade
Add LED since the driver is now available. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Message-ID: <20230819143109.471615-1-andreas@kemnade.info> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-09-25ARM: dts: st: href-tvk1281618: correct touchscreen syna,nosleep-modeKrzysztof Kozlowski
There is no syna,nosleep property in Synaptics RMI4 touchscreen: ste-hrefprev60-tvk.dtb: synaptics@4b: rmi4-f01@1: 'syna,nosleep' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Message-ID: <20230720115524.137944-2-krzysztof.kozlowski@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-09-25ARM: dts: st: href-tvk1281618: fix touchscreen VIO supplyKrzysztof Kozlowski
According to bindings and Linux driver, there is no VDDIO but VIO supply: ste-hrefprev60-tvk.dtb: synaptics@4b: Unevaluated properties are not allowed ('vddio-supply' was unexpected) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Message-ID: <20230720115524.137944-1-krzysztof.kozlowski@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-09-25arm64: dts: renesas: ulcb/kf: Use multi Component soundKuninori Morimoto
+-- ULCB -------------------+ |+--------+ +--------+| || SSI0| <---> |ak4613 || || SSI1| <---> | || || | +--------+| || | +--------+| || SSI2| <---> |HDMI || || | +--------+| || SSI3| <--+ | || SSI4| <-+| | |+--------+ || | +-------------||------------+ +-- Kingfisher -------------+ | || +--------+| | |+->|pcm3168a|| | +-->| || | +--------+| +---------------------------+ On UCLB/KF, we intuitively think we want to handle these as "2 Sound Cards": card0,0: 1st sound of ULCB (SSI0 - ak4613) card0,1: 2nd sound of ULCB (SSI2 - HDMI) card1,0: 1st sound of KF (SSI3 - pcm3168a) ^ ^ However, because of ASoC Component vs. Card framework limitations, we needed to handle this as "1 big Sound Card": card0,0: 1st sound of ULCB/KF (SSI0 - ak4613) card0,1: 2nd sound of ULCB/KF (SSI2 - HDMI) card0,2: 3rd sound of ULCB/KF (SSI3 - pcm3168a) ^ ^ Now ASoC supports multi Component, which allows us to handle "2 Sound Cards" such as "ULCB Sound Card" and "Kingfisher Sound Card", all ULCB/KF Audio dtsi can be updated. Note that this changes the Sound Card specification method from userland, especially for Kingfisher Sound. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/87fs382yhk.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
generated by cgit (git 2.34.1) at 2025-09-25 20:04:13 +0000