| Age | Commit message (Collapse) | Author |
|---|
|
In newer hardware, IPA supports more than 32 endpoints. Some
registers--such as IPA interrupt registers--represent endpoints
as bits in a 4-byte register, and such registers are repeated as
needed to represent endpoints beyond the first 32.
In ipa_interrupt_suspend_clear_all(), we clear all pending IPA
suspend interrupts by reading all status register(s) and writing
corresponding registers to clear interrupt conditions.
Unfortunately the number of registers to read/write is calculated
incorrectly, and as a result we access *many* more registers than
intended. This bug occurs only when the IPA hardware signals a
SUSPEND interrupt, which happens when a packet is received for an
endpoint (or its underlying GSI channel) that is suspended. This
situation is difficult to reproduce, but possible.
Fix this by correctly computing the number of interrupt registers to
read and write. This is the only place in the code where registers
that map endpoints or channels this way perform this calculation.
Fixes: f298ba785e2d ("net: ipa: add a parameter to suspend registers")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot reported a lockdep violation [1] involving af_unix
support of SO_PEEK_OFF.
Since SO_PEEK_OFF is inherently not thread safe (it uses a per-socket
sk_peek_off field), there is really no point to enforce a pointless
thread safety in the kernel.
After this patch :
- setsockopt(SO_PEEK_OFF) no longer acquires the socket lock.
- skb_consume_udp() no longer has to acquire the socket lock.
- af_unix no longer needs a special version of sk_set_peek_off(),
because it does not lock u->iolock anymore.
As a followup, we could replace prot->set_peek_off to be a boolean
and avoid an indirect call, since we always use sk_set_peek_off().
[1]
WARNING: possible circular locking dependency detected
6.8.0-rc4-syzkaller-00267-g0f1dd5e91e2b #0 Not tainted
syz-executor.2/30025 is trying to acquire lock:
ffff8880765e7d80 (&u->iolock){+.+.}-{3:3}, at: unix_set_peek_off+0x26/0xa0 net/unix/af_unix.c:789
but task is already holding lock:
ffff8880765e7930 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1691 [inline]
ffff8880765e7930 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: sockopt_lock_sock net/core/sock.c:1060 [inline]
ffff8880765e7930 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: sk_setsockopt+0xe52/0x3360 net/core/sock.c:1193
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (sk_lock-AF_UNIX){+.+.}-{0:0}:
lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754
lock_sock_nested+0x48/0x100 net/core/sock.c:3524
lock_sock include/net/sock.h:1691 [inline]
__unix_dgram_recvmsg+0x1275/0x12c0 net/unix/af_unix.c:2415
sock_recvmsg_nosec+0x18e/0x1d0 net/socket.c:1046
____sys_recvmsg+0x3c0/0x470 net/socket.c:2801
___sys_recvmsg net/socket.c:2845 [inline]
do_recvmmsg+0x474/0xae0 net/socket.c:2939
__sys_recvmmsg net/socket.c:3018 [inline]
__do_sys_recvmmsg net/socket.c:3041 [inline]
__se_sys_recvmmsg net/socket.c:3034 [inline]
__x64_sys_recvmmsg+0x199/0x250 net/socket.c:3034
do_syscall_64+0xf9/0x240
entry_SYSCALL_64_after_hwframe+0x6f/0x77
-> #0 (&u->iolock){+.+.}-{3:3}:
check_prev_add kernel/locking/lockdep.c:3134 [inline]
check_prevs_add kernel/locking/lockdep.c:3253 [inline]
validate_chain+0x18ca/0x58e0 kernel/locking/lockdep.c:3869
__lock_acquire+0x1345/0x1fd0 kernel/locking/lockdep.c:5137
lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754
__mutex_lock_common kernel/locking/mutex.c:608 [inline]
__mutex_lock+0x136/0xd70 kernel/locking/mutex.c:752
unix_set_peek_off+0x26/0xa0 net/unix/af_unix.c:789
sk_setsockopt+0x207e/0x3360
do_sock_setsockopt+0x2fb/0x720 net/socket.c:2307
__sys_setsockopt+0x1ad/0x250 net/socket.c:2334
__do_sys_setsockopt net/socket.c:2343 [inline]
__se_sys_setsockopt net/socket.c:2340 [inline]
__x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340
do_syscall_64+0xf9/0x240
entry_SYSCALL_64_after_hwframe+0x6f/0x77
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(sk_lock-AF_UNIX);
lock(&u->iolock);
lock(sk_lock-AF_UNIX);
lock(&u->iolock);
*** DEADLOCK ***
1 lock held by syz-executor.2/30025:
#0: ffff8880765e7930 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1691 [inline]
#0: ffff8880765e7930 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: sockopt_lock_sock net/core/sock.c:1060 [inline]
#0: ffff8880765e7930 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: sk_setsockopt+0xe52/0x3360 net/core/sock.c:1193
stack backtrace:
CPU: 0 PID: 30025 Comm: syz-executor.2 Not tainted 6.8.0-rc4-syzkaller-00267-g0f1dd5e91e2b #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1e7/0x2e0 lib/dump_stack.c:106
check_noncircular+0x36a/0x4a0 kernel/locking/lockdep.c:2187
check_prev_add kernel/locking/lockdep.c:3134 [inline]
check_prevs_add kernel/locking/lockdep.c:3253 [inline]
validate_chain+0x18ca/0x58e0 kernel/locking/lockdep.c:3869
__lock_acquire+0x1345/0x1fd0 kernel/locking/lockdep.c:5137
lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754
__mutex_lock_common kernel/locking/mutex.c:608 [inline]
__mutex_lock+0x136/0xd70 kernel/locking/mutex.c:752
unix_set_peek_off+0x26/0xa0 net/unix/af_unix.c:789
sk_setsockopt+0x207e/0x3360
do_sock_setsockopt+0x2fb/0x720 net/socket.c:2307
__sys_setsockopt+0x1ad/0x250 net/socket.c:2334
__do_sys_setsockopt net/socket.c:2343 [inline]
__se_sys_setsockopt net/socket.c:2340 [inline]
__x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340
do_syscall_64+0xf9/0x240
entry_SYSCALL_64_after_hwframe+0x6f/0x77
RIP: 0033:0x7f78a1c7dda9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f78a0fde0c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036
RAX: ffffffffffffffda RBX: 00007f78a1dac050 RCX: 00007f78a1c7dda9
RDX: 000000000000002a RSI: 0000000000000001 RDI: 0000000000000006
RBP: 00007f78a1cca47a R08: 0000000000000004 R09: 0000000000000000
R10: 0000000020000180 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000000006e R14: 00007f78a1dac050 R15: 00007ffe5cd81ae8
Fixes: 859051dd165e ("bpf: Implement cgroup sockaddr hooks for unix sockets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Cc: Daan De Meyer <daan.j.demeyer@gmail.com>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Martin KaFai Lau <martin.lau@kernel.org>
Cc: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With commit 34d21de99cea9 ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core instead
of this driver.
With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.
Move dummy driver to leverage the core allocation.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
AF reserves MCAM entries for each PF, VF present in the
system and populates the entry with DMAC and action with
default RSS so that basic packet I/O works. Since PF/VF is
not aware of the RSS action installed by AF, AF only fixup
the actions of the rules installed by PF/VF with corresponding
default RSS action. This worked well for rules installed by
PF/VF for features like RX VLAN offload and DMAC filters but
rules involving action like drop/forward to queue are also
getting modified by AF. Hence fix it by setting the default
RSS action only if requested by PF/VF.
Fixes: 967db3529eca ("octeontx2-af: add support for multicast/promisc packet replication feature")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make use of ethtool_adv_to_mmd_eee_adv_t() to simplify the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current code overwrites fields in tp->eee with unchecked data from
edata, e.g. the bitmap with supported modes. ethtool properly returns
the received data from get_eee() call, but we have no guarantee that
other users of the ioctl set_eee() interface behave properly too.
Therefore copy only fields which are actually needed.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The struct xt_entry_target fake flexible array has not be converted to a
true flexible array, which is mainly blocked by it being both UAPI and
used in the middle of other structures. In order to properly check for
0-sized destinations in memcpy(), an exception must be made for the one
place where it is still a destination. Since memcpy() was already
skipping checks for 0-sized destinations, using unsafe_memcpy() is no
change in behavior.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
No need to keep this in the core, move it to the nfnetlink_queue module.
nf_reroute is moved too, there were no other callers.
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
An earlier attempt changed this to GFP_KERNEL, but the get helper is
also called for get requests from userspace, which uses rcu.
Let the caller pass in the kmalloc flags to allow insertions
to schedule if needed.
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Insertions into the set are slow when we try to add many elements.
For 800k elements I get:
time nft -f pipapo_800k
real 19m34.849s
user 0m2.390s
sys 19m12.828s
perf stats:
--95.39%--nft_pipapo_insert
|--76.60%--pipapo_insert
| --76.37%--pipapo_resize
| |--72.87%--memcpy_orig
| |--1.88%--__free_pages_ok
| | --0.89%--free_tail_page_prepare
| --1.38%--kvmalloc_node
..
--18.56%--pipapo_get.isra.0
|--13.91%--__bitmap_and
|--3.01%--pipapo_refill
|--0.81%--__kmalloc
| --0.74%--__kmalloc_large_node
| --0.66%--__alloc_pages
..
--0.52%--memset_orig
So lots of time is spent in copying exising elements to make space for
the next one.
Instead of allocating to the exact size of the new rule count, allocate
extra slack to reduce alloc/copy/free overhead.
After:
time nft -f pipapo_800k
real 1m54.110s
user 0m2.515s
sys 1m51.377s
--80.46%--nft_pipapo_insert
|--73.45%--pipapo_get.isra.0
|--57.63%--__bitmap_and
| |--8.52%--pipapo_refill
|--3.45%--__kmalloc
| --3.05%--__kmalloc_large_node
| --2.58%--__alloc_pages
--2.59%--memset_orig
|--6.51%--pipapo_insert
--5.96%--pipapo_resize
|--3.63%--memcpy_orig
--2.13%--kvmalloc_node
The new @rules_alloc fills a hole, so struct size doesn't go up.
Also make it so rule removal doesn't shrink unless the free/extra space
exceeds two pages. This should be safe as well:
When a rule gets removed, the attempt to lower the allocated size is
already allowed to fail.
Exception: do exact allocations as long as set is very small (less
than one page needed).
v2: address comments from Stefano:
kdoc comment
formatting changes
remove redundant assignment
switch back to PAGE_SIZE
Link: https://lore.kernel.org/netfilter-devel/20240213141753.17ef27a6@elisabeth/
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
The set uses a mix of 'int', 'unsigned int', and size_t.
The rule count limit is NFT_PIPAPO_RULE0_MAX, which cannot
exceed INT_MAX (a few helpers use 'int' as return type).
Add a compile-time assertion for this.
Replace size_t usage in structs with unsigned int or u8 where
the stored values are smaller.
Replace signed-int arguments for lengths with 'unsigned int'
where possible.
Last, remove lt_aligned member: its set but never read.
struct nft_pipapo_match 40 bytes -> 32 bytes
struct nft_pipapo_field 56 bytes -> 32 bytes
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
pipapo relies on kmalloc(0) returning ZERO_SIZE_PTR (i.e., not NULL
but pointer is invalid).
Rework this to not call slab allocator when we'd request a 0-byte
allocation.
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Those get called from packet path, content must not be modified.
No functional changes intended.
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Randy Dunlap reports arptables build failure:
arp_tables.c:(.text+0x20): undefined reference to `xt_find_table'
... because recent change removed a 'select' on the xtables core.
Add a "depends" clause on arptables to resolve this.
Kernel test robot reports another build breakage:
iptable_nat.c:(.text+0x8): undefined reference to `ipt_unregister_table_exit'
... because of a typo, the nat table selected ip6tables.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/netfilter-devel/d0dfbaef-046a-4c42-9daa-53636664bf6d@infradead.org/
Fixes: a9525c7f6219 ("netfilter: xtables: allow xtables-nft only builds")
Fixes: 4654467dc7e1 ("netfilter: arptables: allow xtables-nft only builds")
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Remove useless branch to check for errors in nft_parse_register_store().
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Sanitize nf_logger_find_get() input parameters, no caller in the tree
passes invalid values.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Consolidate pointer fetch to logger and check for NULL in
__find_logger().
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
nf_conntrack_expect_init
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.8, take #3
- Check for the validity of interrupts handled by a MOVALL
command
- Check for the validity of interrupts while reading the
pending state on enabling LPIs.
|
|
$ make W=1 -j100 M=drivers/gpu/drm/xe
MODPOST drivers/gpu/drm/xe/Module.symvers
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/xe/tests/xe_mocs_test.o
Fix is identical to '1d425066f15f ("drm/xe: Fix modpost warning on kunit
modules")'.
Fixes: a6a4ea6d7d37 ("drm/xe: Add mocs kunit")
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit bb619d71224ea85ec94e0a83b2bb82ebe7df2a41)
Link: https://patchwork.freedesktop.org/patch/msgid/20240213033548.76219-1-ashutosh.dixit@intel.com
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
It is possible that an LPI mapped in a different ITS gets unmapped while
handling the MOVALL command. If that is the case, there is no state that
can be migrated to the destination. Silently ignore it and continue
migrating other LPIs.
Cc: stable@vger.kernel.org
Fixes: ff9c114394aa ("KVM: arm/arm64: GICv4: Handle MOVALL applied to a vPE")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240221092732.4126848-3-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
vgic_get_irq() may not return a valid descriptor if there is no ITS that
holds a valid translation for the specified INTID. If that is the case,
it is safe to silently ignore it and continue processing the LPI pending
table.
Cc: stable@vger.kernel.org
Fixes: 33d3bc9556a7 ("KVM: arm64: vgic-its: Read initial LPI pending table")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240221092732.4126848-2-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Ricardo B. Marliere says:
====================
net: constify struct device_type usage
This is a simple and straight forward cleanup series that makes all device
types in the net subsystem constants. This has been possible since 2011 [1]
but not all occurrences were cleaned. I have been sweeping the tree to fix
them all.
I was not sure if I should send these squashed, but there are quite a few
changes so I decided to send them separately. Please let me know if that is
not desirable.
[1] https://lore.kernel.org/all/1305850262-9575-5-git-send-email-gregkh@suse.de/
====================
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
|
|
Since commit aed65af1cc2f ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the hso_type
variable to be a constant structure as well, placing it into read-only
memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit aed65af1cc2f ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the wwan_type
variable to be a constant structure as well, placing it into read-only
memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit aed65af1cc2f ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the
nsim_bus_dev_type variable to be a constant structure as well, placing it
into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit aed65af1cc2f ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the vlan_type
variable to be a constant structure as well, placing it into read-only
memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit aed65af1cc2f ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the l2tpeth_type
variable to be a constant structure as well, placing it into read-only
memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit aed65af1cc2f ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the hsr_type
variable to be a constant structure as well, placing it into read-only
memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit aed65af1cc2f ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the geneve_type
variable to be a constant structure as well, placing it into read-only
memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit aed65af1cc2f ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the ppp_type
variable to be a constant structure as well, placing it into read-only
memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit aed65af1cc2f ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the vxlan_type
variable to be a constant structure as well, placing it into read-only
memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit aed65af1cc2f ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the br_type
variable to be a constant structure as well, placing it into read-only
memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit aed65af1cc2f ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the dsa_type
variable to be a constant structure as well, placing it into read-only
memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit aed65af1cc2f ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the wlan_type
and wwan_type variables to be constant structures as well, placing it into
read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Newline in name is redunant and produces an unnecessary empty line during
'cat name'. Newline is added during sysfs_emit. See '27a1a1e2e47d ("drm/xe:
stringify the argument to avoid potential vulnerability")'.
v2: Add Fixes tag (Riana)
Fixes: 7b076d14f21a ("drm/xe/mtl: Add support to get C6 residency/status of MTL")
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
(cherry picked from commit e5626eb80026c4b63f8682cdeca1456303c65791)
Link: https://patchwork.freedesktop.org/patch/msgid/20240206192731.3533608-1-ashutosh.dixit@intel.com
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Compact 64k PTEs are only intended to be used within a single VMA which
covers the entire 2MB range of the compact 64k PTEs. Add
XE_VMA_PTE_COMPACT VMA flag to indicate compact 64k PTEs are used and
update xe_vma_max_pte_size to return at least 2MB if set.
v2: Include missing changes
Fixes: 8f33b4f054fc ("drm/xe: Avoid doing rebinds")
Fixes: c47794bdd63d ("drm/xe: Set max pte size when skipping rebinds")
Reported-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/758
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240219211942.3633795-4-matthew.brost@intel.com
(cherry picked from commit 0f688c0eb63a643ef0568b29b12cefbb23181e1a)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Add XE_VMA_PTE_64K VMA flag to ensure skipping rebinds does not cross
64k page boundaries.
Fixes: 8f33b4f054fc ("drm/xe: Avoid doing rebinds")
Fixes: c47794bdd63d ("drm/xe: Set max pte size when skipping rebinds")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240219211942.3633795-3-matthew.brost@intel.com
(cherry picked from commit 15f0e0c2c46dddd8ee56d9b3db679fd302cc4b91)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
xe_vma_set_pte_size had a return value and did not set the 4k VMA flag.
Both of these were incorrect. Fix these.
Fixes: c47794bdd63d ("drm/xe: Set max pte size when skipping rebinds")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240219211942.3633795-2-matthew.brost@intel.com
(cherry picked from commit 19adaccef8b246182dc89a7470aa7758245efd5d)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
On 32-bit builds, the vt-d driver causes a warning with clang:
drivers/iommu/intel/nested.c:112:13: error: result of comparison of constant 18446744073709551615 with expression of type 'unsigned long' is always false [-Werror,-Wtautological-constant-out-of-range-compare]
112 | if (npages == U64_MAX)
| ~~~~~~ ^ ~~~~~~~
Make the variable a 64-bit type, which matches both the caller and the
use anyway.
Fixes: f6f3721244a8 ("iommu/vt-d: Add iotlb flush for nested domain")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240213095832.455245-1-arnd@kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Should set the SSADE (Second Stage Access/Dirty bit Enable) bit of the
pasid entry when attaching a device to a nested domain if its parent
has already enabled dirty tracking.
Fixes: 111bf85c68f6 ("iommu/vt-d: Add helper to setup pasid nested translation")
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Link: https://lore.kernel.org/r/20240208091414.28133-1-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Setting dirty tracking for a s2 domain requires to loop all the related
devices and set the dirty tracking enable bit in the PASID table entry.
This includes the devices that are attached to the nested domains of a
s2 domain if this s2 domain is used as parent. However, the existing dirty
tracking set only loops s2 domain's own devices. It will miss dirty page
logs in the parent domain.
Now, the parent domain tracks the nested domains, so it can loop the
nested domains and the devices attached to the nested domains to ensure
dirty tracking on the parent is set completely.
Fixes: b41e38e22539 ("iommu/vt-d: Add nested domain allocation")
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240208082307.15759-9-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Add device_set_dirty_tracking() to loop all the devices and set the dirty
tracking per the @enable parameter.
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Link: https://lore.kernel.org/r/20240208082307.15759-8-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The only usage of input @domain is to get the domain id (DID) to flush
cache after setting dirty tracking. However, DID can be obtained from
the pasid entry. So no need to pass in domain. This can make this helper
cleaner when adding the missing dirty tracking for the parent domain,
which needs to use the DID of nested domain.
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240208082307.15759-7-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
ATS-capable devices cache the result of nested translation. This result
relies on the mappings in s2 domain (a.k.a. parent). When there are
modifications in the s2 domain, the related nested translation caches on
the device should be flushed. This includes the devices that are attached
to the s1 domain. However, the existing code ignores this fact to only
loops its own devices.
As there is no easy way to identify the exact set of nested translations
affected by the change of s2 domain. So, this just flushes the entire
device iotlb on the device.
As above, driver loops the s2 domain's s1_domains list and loops the
devices list of each s1_domain to flush the entire device iotlb on the
devices.
Fixes: b41e38e22539 ("iommu/vt-d: Add nested domain allocation")
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240208082307.15759-6-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Should call domain_update_iotlb() to update the has_iotlb_device flag
of the domain after attaching device to nested domain. Without it, this
flag is not set properly and would result in missing device TLB flush.
Fixes: 9838f2bb6b6b ("iommu/vt-d: Set the nested domain to a device")
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240208082307.15759-5-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
If a domain is used as the parent in nested translation its mappings might
be cached using DID of the nested domain. But the existing code ignores
this fact to only invalidate the iotlb entries tagged by the domain's own
DID.
Loop the s1_domains list, if any, to invalidate all iotlb entries related
to the target s2 address range. According to VT-d spec there is no need for
software to explicitly flush the affected s1 cache. It's implicitly done by
HW when s2 cache is invalidated.
Fixes: b41e38e22539 ("iommu/vt-d: Add nested domain allocation")
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240208082307.15759-4-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Add __iommu_flush_iotlb_psi() to do the psi iotlb flush with a DID input
rather than calculating it within the helper.
This is useful when flushing cache for parent domain which reuses DIDs of
its nested domains.
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240208082307.15759-3-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Today the parent domain (s2_domain) is unaware of which DID's are
used by and which devices are attached to nested domains (s1_domain)
nested on it. This leads to a problem that some operations (flush
iotlb/devtlb and enable dirty tracking) on parent domain only apply to
DID's and devices directly tracked in the parent domain hence are
incomplete.
This tracks the nested domains in list in parent domain. With this,
operations on parent domain can loop the nested domains and refer to
the devices and iommu_array to ensure the operations on parent domain
take effect on all the affected devices and iommus.
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240208082307.15759-2-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Persistent exec_queues delays explicit destruction of exec_queues
until they are done executing, but destruction on process exit
is still immediate. It turns out no UMD is relying on this
functionality, so remove it. If there turns out to be a use-case
in the future, let's re-add.
Persistent exec_queues were never used for LR VMs
v2:
- Don't add an "UNUSED" define for the missing property
(Lucas, Rodrigo)
v3:
- Remove the remaining struct xe_exec_queue::persistent state
(Niranjana, Lucas)
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240209113444.8396-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit f1a9abc0cf311375695bede1590364864c05976d)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
