summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-10-11accel/ivpu: Stop using hardcoded DRIVER_DATEJacek Lawrynowicz
Hardcoded driver date is useless, so use kernel version as a driver date to make identifying .ko file easier. Also allow to pass DRIVER_DATE on build time to allow versioning the driver in case it is built out of the tree. Reviewed-by: Karol Wachowski <karol.wachowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-13-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Add FW version debugfs entryKarol Wachowski
Add debugfs that prints current firmware version string on read. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-12-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Turn on autosuspend on SimicsKarol Wachowski
With recent Simics update DVFS flows using cdyn were fixed and it is possible to enable D0i3/D3 entry flows on autosuspend. Set autosuspend timeout to 100 ms by default on Simics. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-11-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Set 500 ns delay between power island TRICKLE and ENABLEKarol Wachowski
Follow HW documentation recommendation of 500 ns delay between setting AON_PWR_ISLAND_TRICKLE_EN and AON_PWR_ISLAND_EN registers during power island enabling. Previously this was only done correctly for VPU 4+. VPU 3.7 had the delay added after power island disable where it is not needed. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-10-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Add FW state dump on TDRTomasz Rusinowicz
Send JSM state dump message at the beginning of TDR handler. This allows FW to collect debug info in the FW log before the state of the NPU is lost allowing to analyze the cause of a TDR. Wait a predefined timeout (10 ms) so the FW has a chance to write debug logs. We cannot wait for JSM response at this point because IRQs are already disabled before TDR handler is invoked. Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-9-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Add coredump supportKarol Wachowski
Use coredump (if available) to collect FW logs in case of a FW crash. This makes dmesg more readable and allows to collect more log data. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-8-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Limit FW version string lengthJacek Lawrynowicz
Limit FW version string, when parsing FW binary, to 256 bytes and always add NULL-terminate it. Reviewed-by: Karol Wachowski <karol.wachowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-7-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Fix fw log printingJacek Lawrynowicz
- Fix empty log detection that couldn't work without read_wrap_count - Start printing wrapped log from correct position (log_start) - Properly handle logs that are wrapped multiple times in reference to reader position - Don't add a newline when log buffer is wrapped - Always add a newline after printing a log buffer in case log does not end with one Reviewed-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-6-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Refactor functions in ivpu_fw_log.cJacek Lawrynowicz
Make function names more consistent and (arguably) readable in fw log code. Add fw_log_print_all_in_bo() that remove duplicated code in ivpu_fw_log_print(). Reviewed-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-5-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Reset fw log on cold bootTomasz Rusinowicz
Add ivpu_fw_log_reset() that resets the read_index of all FW logs on cold boot so logs are properly read. Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-4-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Rename ivpu_log_level to fw_log_levelJacek Lawrynowicz
Rename module param ivpu_log_level to fw_log_level, so it is clear what log level is actually changed. Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-3-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Update VPU FW API headersAndrzej Kacprowski
This commit bumps: - Boot API from 3.24.0 to 3.26.3 - JSM API from 3.16.0 to 3.25.0 Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com> Co-developed-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-2-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11Merge tag 'drm-xe-next-2024-10-10' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next Cross-subsystem Changes: - Add drm_line_printer (Michal) Driver Changes: - Fix an UAF (Matt Auld) - Sanity check compression and coherency mode (Matt Auld) - Some PIC-ID work (Jani) - Use IS_ENABLED() instead of defined() on config options. - gt powergating work (Riana) - Suppress missing out ter rpm protection warning (Rodrigo) - Fix a vm leak (Dafna) - Clean up and update 'has_flat_ccs' handling (Lucas) - Fix arg to pci_iomap (Lucas) - Mark reserved engines in shapshot (Lucas) - Don't keep stale pointer (Michal) - Fix build warning with CONFIG_PM=n (Arnd) - Add a xe_bo subtest for shrinking / swapping (Thomas) - Add a warkaround (Tejas) - Some display PM work (Maarten) - Enable Xe2 + PES disaggregation (Ashutosh) - Large xe_mmio rework / cleanup (Matt Roper) - A couple of fixes / cleanups in the xe client code (Matt Auld) - Fix page-fault handling on closed VMs (Matt Brost) - Fix overflow in OA batch buffer (José) - Style fixes (Lucas, Jiapeng, Nitin) - Fixes and new development around SRIOV (Michal) - Use devm_add_action_or_reset() in gt code (He) - Fix CCS offset calculation (Matt Auld) - Remove i915_drv.h include (Rodrigo) - Restore PCI state on resume (Rodrigo) - Fix DSB buffer coherency / Revert DSB disabling (Maarten / Animesh) - Convert USM lock to rwsem (Matt Brost) - Defer gt-mmio intialization (Matt Roper) - meemirq changes (Ilia) - Move some PVC related code out of xe-for-CI and to the driver (Rodrigo / Jani) - Use a helper for ASID->VM lookup (Matt Brost) - Add new PCI id for ARL (Dnyaneshwar) - Use Xe2_LPM steering tables for Xe2_HPM (Gustavo) - Performance tuning work for media GT and L3 cache flushing (Gustavo) - Clean up VM- and exec queue file lock usage (Matt Brost) - GuC locking fix (Matt Auld) - Fix UAF around queue destruction (Matt Auld) - Move IRQ-related registers to dedicated header (Matt Roper) - Resume TDR after GT reset (Matt Brost) - Move xa_alloc to prevent UAF (Matt Auld) - Fix OA stream close (José) - Remove unused i915_gpu_error.h (Jani) - Prevent null pointer access in xe_migrate_copy (Zhanjun) - Fix memory leak when aborting binds (Matt Brost) - Prevent UAF in send_recv() (Matt Auld) - Fix xa_store() error checking (Matt Auld) - drop irq disabling around xa_erase in guc code (Matt Auld) - Use fault injection infrastructure to find issues as probe time (Francois) - Fix a workaround implementation. (Vinay) - Mark wedged_mode debugfs writable (Matt Roper) - Fix for prviewous memirq work (Michal) - More SRIOV work (Michal) - Devcoredump work (John) - GuC logging + devcoredump support (John) - Don't report L3 bank availability on PTL (Shekhar) - Replicate Xe2 PAT settings on Xe2 (Matt Roper) - Define Xe3 feature flags (Haridhar) - Reuse Xe2 MOCS table on on PTL (Haridhar) - Add PTL platform definition (Haridhar) - Add MCR steering for Xe3 (Matt) - More work around GuC capture for devcoredump (Zhanjun) - Improve cache flushing behaviour on bmg (Matt Auld) - Fix shrinker test compiler warnings on 32-bit (Thomas) - Initial set of workarounds for Xe3 (Gustavo) - Extend workaround for xe2lpg (Aradhya) - Fix unbalanced rpm put x 2 (Matt Auld) Signed-off-by: Dave Airlie <airlied@redhat.com> # -----BEGIN PGP SIGNATURE----- # # iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCZwekBwAKCRC4FpNVCsYG # v32oAQDnIKVwjZecI1V3oUsy2ZE3TKWx8HH4FweT6S5L6tqZwQD/b0vkeA3UaojO # 5FIkPEqyHFbrj+Sw7bLonLb3LHv4WAE= # =FtY6 # -----END PGP SIGNATURE----- # gpg: Signature made Thu 10 Oct 2024 19:53:11 AEST # gpg: using EDDSA key 6C91433BC35A06E6BC762193B81693550AC606BF # gpg: Can't check signature: No public key # Conflicts: # drivers/gpu/drm/xe/xe_gt_mcr.c # drivers/gpu/drm/xe/xe_tuning.c From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Zwekwrak12c5SSgo@fedora
2024-10-11Merge tag 'drm-misc-next-2024-10-09' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for v6.13: UAPI Changes: - Add drm fdinfo support to panthor, and add sysfs knob to toggle. Cross-subsystem Changes: - Convert fbdev drivers to use backlight power constants. - Some small dma-fence fixes. - Some kernel-doc fixes. Core Changes: - Small drm client fixes. - Document requirements that you need to file a bug before marking a test as flaky. - Remove swapped and pinned bo's from TTM lru list. Driver Changes: - Assorted small fixes to panel/elida-kd35t133, nouveau, vc4, imx. - Fix some bridges to drop cached edids on power off. - Add Jenson BL-JT60050-01A, Samsung s6e3ha8 & AMS639RQ08 panels. - Make 180° rotation work on ilitek-ili9881c, even for already-rotated panels. - Signed-off-by: Dave Airlie <airlied@redhat.com> # Conflicts: # drivers/gpu/drm/panthor/panthor_drv.c From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/8dc111ca-d20c-4e0d-856e-c12d208cbf2a@linux.intel.com
2024-10-10drm/mipi-dsi: fix kernel doc on mipi_dsi_compression_mode_multiDzmitry Sankouski
Replace dsi parameter on ctx in kernel doc of mipi_dsi_compression_mode_multi function. Fixes: 975bdea8c470 ("drm/mipi-dsi: add mipi_dsi_compression_mode_multi") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202410092245.tfsuUllL-lkp@intel.com/ Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20241010-starqltechn_integration_upstream_drm_fix-v1-1-cf3cb1d1ce77@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241010-starqltechn_integration_upstream_drm_fix-v1-1-cf3cb1d1ce77@gmail.com
2024-10-10drm/display: Fix building with GCC 15Brahmajit Das
GCC 15 enables -Werror=unterminated-string-initialization by default. This results in the following build error drivers/gpu/drm/display/drm_dp_dual_mode_helper.c: In function ‘is_hdmi_adaptor’: drivers/gpu/drm/display/drm_dp_dual_mode_helper.c:164:17: error: initializer-string for array of ‘char’ is too long [-Werror=unterminated-string-initialization] 164 | "DP-HDMI ADAPTOR\x04"; | ^~~~~~~~~~~~~~~~~~~~~ After discussion with Ville, the fix was to increase the size of dp_dual_mode_hdmi_id array by one, so that it can accommodate the NULL line character. This should let us build the kernel with GCC 15. Signed-off-by: Brahmajit Das <brahmajit.xyz@gmail.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241002092311.942822-1-brahmajit.xyz@gmail.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-10-10drm/xe: fix unbalanced rpm put() with declare_wedged()Matthew Auld
Technically the or_reset() means we call the action on failure, however that would lead to unbalanced rpm put(). Move the get() earlier to fix this. It should be extremely unlikely to ever trigger this in practice. Fixes: 452bca0edbd0 ("drm/xe: Don't suspend device upon wedge") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241009084808.204432-4-matthew.auld@intel.com
2024-10-10drm/xe: fix unbalanced rpm put() with fence_fini()Matthew Auld
Currently we can call fence_fini() twice if something goes wrong when sending the GuC CT for the tlb request, since we signal the fence and return an error, leading to the caller also calling fini() on the error path in the case of stack version of the flow, which leads to an extra rpm put() which might later cause device to enter suspend when it shouldn't. It looks like we can just drop the fini() call since the fence signaller side will already call this for us. There are known mysterious splats with device going to sleep even with an rpm ref, and this could be one candidate. v2 (Matt B): - Prefer warning if we detect double fini() Fixes: 0a382f9bc5dc ("drm/xe: Hold a PM ref when GT TLB invalidations are inflight") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241009084808.204432-3-matthew.auld@intel.com
2024-10-10drm/bochs: Return error from correct pointerThomas Zimmermann
In probe, return the error code from the variable bochs, not dev. The variable dev has not been initialized at this point. In the case of an allocation error, the returned value would have been undefined. Reported-by: Kees Bakker <kees@ijzerbout.nl> Closes: https://lore.kernel.org/dri-devel/8c5bfc12-cbcc-4102-9826-494060df4179@ijzerbout.nl/ Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 04826f588682 ("drm/bochs: Allocate DRM device in struct bochs_device") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: virtualization@lists.linux.dev Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241004075404.41743-1-tzimmermann@suse.de
2024-10-09drm/edp-panel: Add panels used by Dell XPS 13 9345Aleksandrs Vinarskis
Introduce low-res IPS and OLED panels for mentioned device. SHP panel's timings were picked experimentally, without this patch or with `delay_200_500_e50` panel sometimes fails to boot/stays black on startup. LGD panel's timings were copied from other LGD panels and tested to be working. Particular laptop also comes in high-res IPS variant, which unfortunately I do not have access to verify. The raw edid for SHP panel is: 00 ff ff ff ff ff ff 00 4d 10 93 15 00 00 00 00 2c 21 01 04 a5 1d 12 78 07 ee 95 a3 54 4c 99 26 0f 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 f0 7b 80 90 70 b0 52 45 30 20 36 00 20 b4 10 00 00 18 00 00 00 fd 00 1e 78 9a 9a 20 01 0a 20 20 20 20 20 20 00 00 00 fe 00 4b 4a 46 47 52 80 4c 51 31 33 34 4e 31 00 00 00 00 00 02 41 0c 32 00 01 00 00 0b 41 0a 20 20 01 ef 70 20 79 02 00 20 00 13 8c 52 19 93 15 00 00 00 00 2c 17 07 4c 51 31 33 34 4e 31 21 00 1d 40 0b 08 07 80 07 b0 04 88 3d 8a 54 cd a4 99 66 62 0f 02 45 54 d0 5f d0 5f 00 34 12 78 26 00 09 02 00 00 00 00 00 01 00 00 22 00 14 5e d7 04 05 7f 07 8f 00 2f 00 1f 00 af 04 50 00 02 00 05 00 25 01 09 5e d7 04 5e d7 04 1e 78 80 81 00 0b e3 05 80 00 e6 06 01 01 6a 6a 39 00 00 00 00 00 00 ce 90 The raw edid for LGD panel is: 00 ff ff ff ff ff ff 00 30 e4 78 07 00 00 00 00 00 22 01 04 b5 1d 12 78 06 96 65 b0 4f 3c b9 23 0b 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 ef 83 40 a0 b0 08 34 70 30 20 36 00 20 b4 10 00 00 1a 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe 00 44 48 39 50 57 80 31 33 34 57 54 31 0a 00 00 00 00 00 04 04 03 28 00 01 00 00 2b 01 0a 20 20 01 d4 70 20 79 02 00 20 00 13 3c e6 24 78 07 00 00 00 00 00 18 07 31 33 34 57 54 31 0a 21 00 1d 41 0b 08 07 40 0b 08 07 88 06 6b 4f c3 a3 b9 35 82 0b 02 45 54 40 5e 1a 60 18 10 23 78 26 00 09 04 00 00 00 00 00 41 00 00 22 00 14 55 27 05 85 3f 0b 9f 00 2f 80 1f 00 07 07 33 00 02 00 05 00 25 01 09 55 27 05 55 27 05 3c 3c 00 81 00 0b e3 05 80 00 e6 06 05 01 6d 60 02 00 00 00 00 00 00 31 90 Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com> Tested-by: Peter de Kraker <peterdekraker@umito.nl> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241008073014.16411-1-alex.vinarskis@gmail.com
2024-10-09drm/xe/xe2lpg: Extend Wa_15016589081 for xe2lpgAradhya Bhatia
Add workaround (wa) 15016589081 which applies to Xe2_v3_LPG_MD. Xe2_v3_LPG_MD is a Lunar Lake platform with GFX version: 20.04. This wa is type: permanent, and hence is applicable on all steppings. Signed-off-by: Aradhya Bhatia <aradhya.bhatia@intel.com> Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241009065542.283151-1-aradhya.bhatia@intel.com
2024-10-09drm: Fix for kernel doc warningR Sundar
Added colon in kernel-doc comment to fix the warning. ./include/drm/drm_drv.h:372: warning: Incorrect use of kernel-doc format: * @fbdev_probe ./include/drm/drm_drv.h:435: warning: Function parameter or struct member 'fbdev_probe' not described in 'drm_driver' Signed-off-by: R Sundar <prosunofficial@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241003023806.17537-1-prosunofficial@gmail.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-10-09drm/imx: add forward declarations for typesJani Nikula
The imx.h header does not forward declare the types it uses, and the header is not self-contained. Fix it. Fixes: cc3e8a216d6b ("drm/imx: add internal bridge handling display-timings DT node") Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: imx@lists.linux.dev Cc: linux-arm-kernel@lists.infradead.org Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/20241009140452.1981175-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-10-09drm/file: fix client_name_lock kernel-doc warningJani Nikula
It's client_name_lock, not name_lock. Also unify style while at it. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Closes: https://lore.kernel.org/r/20241009172650.29169e6f@canb.auug.org.au Fixes: 56c594d8df64 ("drm: add DRM_SET_CLIENT_NAME ioctl") Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241009140300.1980746-1-jani.nikula@intel.com Signed-off-by: Christian König <christian.koenig@amd.com>
2024-10-09drm/xe/xe3: Add initial set of workaroundsGustavo Sousa
Implement the initial set of workarounds for Xe3 IPs. Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241008204626.55802-2-matthew.s.atwood@intel.com
2024-10-09drm/writeback: remove pointless enable_signaling implementationChristian König
Just returning true here is a no-op, remove the optional callback. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20240911085903.1496-4-christian.koenig@amd.com
2024-10-09dma-buf/sw_sync: remove pointless enable_signaling implementationChristian König
Just returning true here is a no-op, remove the optional callback. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20240911085903.1496-3-christian.koenig@amd.com
2024-10-09dma-buf: add WARN_ON() illegal dma-fence signalingChristian König
Calling the signaling a NULL fence is obviously a coding error in a driver. Those functions unfortunately just returned silently without raising a warning. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20240911085903.1496-2-christian.koenig@amd.com
2024-10-09drm/ttm: Move pinned objects off LRU lists when pinningThomas Hellström
The ttm_bo_pin() and ttm_bo_unpin() functions weren't moving their resources off the LRU list to the unevictable list. Make sure that happens so that pinned objects don't accidently linger on the LRU lists, and also make sure to move them back once they are unpinned. v2: - Removing from a bulk move must be done with the pin-count still zero. v3: - ttm_resource_move_to_lru_tail must be done after pinning with a non- NULL resource (Intel CI). v6: - Use a TAB instead of space (checkpatch.pl error). Cc: Christian König <christian.koenig@amd.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: <dri-devel@lists.freedesktop.org> Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240911121859.85387-3-thomas.hellstrom@linux.intel.com
2024-10-09drm/ttm: Move swapped objects off the manager's LRU listThomas Hellström
Resources of swapped objects remains on the TTM_PL_SYSTEM manager's LRU list, which is bad for the LRU walk efficiency. Rename the device-wide "pinned" list to "unevictable" and move also resources of swapped-out objects to that list. An alternative would be to create an "UNEVICTABLE" priority to be able to keep the pinned- and swapped objects on their respective manager's LRU without affecting the LRU walk efficiency. v2: - Remove a bogus WARN_ON (Christian König) - Update ttm_resource_[add|del] bulk move (Christian König) - Fix TTM KUNIT tests (Intel CI) v3: - Check for non-NULL bo->resource in ttm_bo_populate(). v4: - Don't move to LRU tail during swapout until the resource is properly swapped or there was a swapout failure. (Intel Ci) - Add a newline after checkpatch check. v5: - Introduce ttm_resource_is_swapped() to avoid a corner-case where a newly created resource was considered swapped. (Intel CI) v6: - Move an assert. Cc: Christian König <christian.koenig@amd.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: <dri-devel@lists.freedesktop.org> Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240911121859.85387-2-thomas.hellstrom@linux.intel.com
2024-10-09drm/vc4: Correct generation check in vc4_hvs_lut_loadDave Stevenson
Commit 24c5ed3ddf27 ("drm/vc4: Introduce generation number enum") incorrectly swapped a check of hvs->vc4->is_vc5 to hvs->vc4->gen == VC4_GEN_4 in vc4_hvs_lut_load, hence breaking loading the gamma look up table on Pi0-3. Correct that conditional. Fixes: 24c5ed3ddf27 ("drm/vc4: Introduce generation number enum") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Closes: https://lore.kernel.org/dri-devel/37051126-3921-4afe-a936-5f828bff5752@samsung.com/ Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Maíra Canal <mcanal@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241008-drm-vc4-fixes-v1-3-9d0396ca9f42@raspberrypi.com Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
2024-10-09drm/vc4: Match drm_dev_enter and exit calls in vc4_hvs_atomic_flushDave Stevenson
Commit 92c17d16476c ("drm/vc4: hvs: Ignore atomic_flush if we're disabled") added a path which returned early without having called drm_dev_exit. Ensure all paths call drm_dev_exit. Fixes: 92c17d16476c ("drm/vc4: hvs: Ignore atomic_flush if we're disabled") Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Maíra Canal <mcanal@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241008-drm-vc4-fixes-v1-2-9d0396ca9f42@raspberrypi.com Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
2024-10-09drm/vc4: Match drm_dev_enter and exit calls in vc4_hvs_lut_loadDave Stevenson
Commit 52efe364d196 ("drm/vc4: hvs: Don't write gamma luts on 2711") added a return path to vc4_hvs_lut_load that had called drm_dev_enter, but not drm_dev_exit. Ensure we call drm_dev_exit. Fixes: 52efe364d196 ("drm/vc4: hvs: Don't write gamma luts on 2711") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Closes: https://lore.kernel.org/dri-devel/37051126-3921-4afe-a936-5f828bff5752@samsung.com/ Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Maíra Canal <mcanal@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241008-drm-vc4-fixes-v1-1-9d0396ca9f42@raspberrypi.com Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
2024-10-09drm/vc4: Run default client setup for all variants.Dave Stevenson
Commit 45903624e9fc ("drm/vc4: Run DRM default client setup") only added DRM_FBDEV_DMA_DRIVER_OPS for the vc4 (Pi0-3) driver definition, which caused an issue on vc5 (Pi4) as there was no fbdev_probe function defined. Fixes: 45903624e9fc ("drm/vc4: Run DRM default client setup") Reviewed-by: Maíra Canal <mcanal@igalia.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20241002-vc4_fbdev_fix-v1-1-8737bd11b147@raspberrypi.com Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
2024-10-09drm/xe/tests: Fix the shrinker test compiler warnings.Thomas Hellström
The xe_bo_shrink_kunit test has an uninitialized value and illegal integer size conversions on 32-bit. Fix. v2: - Use div64_u64 to ensure the u64 division compiles everywhere. (Matt Auld) Reported-by: Nathan Chancellor <nathan@kernel.org> Closes: https://lore.kernel.org/20240913195649.GA61514@thelio-3990X/ Fixes: 5a90b60db5e6 ("drm/xe: Add a xe_bo subtest for shrinking / swapping") Cc: dri-devel@lists.freedesktop.org Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> #v1 Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241004141121.186177-1-thomas.hellstrom@linux.intel.com
2024-10-09drm/xe/bmg: improve cache flushing behaviourMatthew Auld
The BSpec says that EN_L3_RW_CCS_CACHE_FLUSH must be toggled on for manual global invalidation to take effect and actually flush device cache, however this also turns on flushing for things like pipecontrol, which occurs between submissions for compute/render. This sounds like massive overkill for our needs, where we already have the manual flushing on the display side with the global invalidation. Some observations on BMG: 1. Disabling l2 caching for host writes and stubbing out the driver global invalidation but keeping EN_L3_RW_CCS_CACHE_FLUSH enabled, has no impact on wb-transient-vs-display IGT, which makes sense since the pipecontrol is now flushing the device cache after the render copy. Without EN_L3_RW_CCS_CACHE_FLUSH the test then fails, which is also expected since device cache is now dirty and display engine can't see the writes. 2. Disabling EN_L3_RW_CCS_CACHE_FLUSH, but keeping the driver global invalidation also has no impact on wb-transient-vs-display. This suggests that the global invalidation still works as expected and is flushing the device cache without EN_L3_RW_CCS_CACHE_FLUSH turned on. With that drop EN_L3_RW_CCS_CACHE_FLUSH. This helps some workloads since we no longer flush the device cache between submissions as part of pipecontrol. Edit: We now also have clarification from HW side that BSpec was indeed wrong here. v2: - Rebase and update commit message. BSpec: 71718 Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Vitasta Wattal <vitasta.wattal@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241007074541.33937-2-matthew.auld@intel.com
2024-10-09drm/panel: Add Samsung AMS639RQ08 panel driverDanila Tikhonov
Add the driver for Samsung AMS639RQ08 FHD Plus CMD mode panel support found in: - Xiaomi Mi 9 Lite / CC9 (sdm710-xiaomi-pyxis) - Xiaomi Mi 9T / Redmi K20 (sm7150-xiaomi-davinci) - Xiaomi Mi 9T Pro / Redmi K20 Pro (sm8150-xiaomi-raphael) Tested-by: Degdag Mohamed <degdagmohamed@gmail.com> # xiaomi-raphael Tested-by: Jens Reidel <adrian@travitia.xyz> # xiaomi-davinci Signed-off-by: Danila Tikhonov <danila@jiaxyga.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240930202448.188051-3-danila@jiaxyga.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240930202448.188051-3-danila@jiaxyga.com
2024-10-09dt-bindings: display: panel: Add Samsung AMS639RQ08Danila Tikhonov
The Samsung AMS639RQ08 is a 6.39 inch 1080x2340 MIPI-DSI CMD mode AMOLED panel used in: - Xiaomi Mi 9 Lite / CC9 (sdm710-xiaomi-pyxis) - Xiaomi Mi 9T / Redmi K20 (sm7150-xiaomi-davinci) - Xiaomi Mi 9T Pro / Redmi K20 Pro (sm8150-xiaomi-raphael) Add a dt-binding for it. Signed-off-by: Danila Tikhonov <danila@jiaxyga.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240930202448.188051-2-danila@jiaxyga.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240930202448.188051-2-danila@jiaxyga.com
2024-10-09drm: panel: jd9365da-h3: Remove unused num_init_cmds structure memberHugo Villeneuve
Now that the driver has been converted to use wrapped MIPI DCS functions, the num_init_cmds structure member is no longer needed, so remove it. Fixes: 35583e129995 ("drm/panel: panel-jadard-jd9365da-h3: use wrapped MIPI DCS functions") Cc: stable@vger.kernel.org Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://lore.kernel.org/r/20240930170503.1324560-1-hugo@hugovil.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240930170503.1324560-1-hugo@hugovil.com
2024-10-09drm/panel: Add support for S6E3HA8 panel driverDzmitry Sankouski
Add support for MIPI-DSI based S6E3HA8 AMOLED panel driver. This panel has 1440x2960 resolution, 5.8-inch physical size, and can be found in starqltechn device. Brightness regulation is not yet supported. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Link: https://lore.kernel.org/r/20241006-starqltechn_integration_upstream-v6-3-8336b9cd6c34@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241006-starqltechn_integration_upstream-v6-3-8336b9cd6c34@gmail.com
2024-10-09dt-bindings: panel: add Samsung s6e3ha8Dzmitry Sankouski
Add binding for the Samsung s6e3ha8 panel found in the Samsung S9. Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Link: https://lore.kernel.org/r/20241006-starqltechn_integration_upstream-v6-2-8336b9cd6c34@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241006-starqltechn_integration_upstream-v6-2-8336b9cd6c34@gmail.com
2024-10-09drm/mipi-dsi: add mipi_dsi_compression_mode_multiDzmitry Sankouski
mipi_dsi_compression_mode_multi can help with error handling. Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20241006-starqltechn_integration_upstream-v6-1-8336b9cd6c34@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241006-starqltechn_integration_upstream-v6-1-8336b9cd6c34@gmail.com
2024-10-09drm/panel: ilitek-ili9881c: Report subpixel order according to rotationPhilipp Zabel
Assume a default RGB subpixel order and flip it around if 180° rotation is configured via address mode. Report subpixel order to userspace. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240626-drm-panel-ili9881c-rotation-v1-2-e0ff54173e32@pengutronix.de Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240626-drm-panel-ili9881c-rotation-v1-2-e0ff54173e32@pengutronix.de
2024-10-09drm/panel: ilitek-ili9881c: Explicitly set address mode, allow 180° rotationPhilipp Zabel
We can use horizontal and vertical flipping via the MIPI DCS address mode to rotate the display by 180° using the device tree "rotation" property. Since the tl050hdv35 panel has been defined as rotated, we have to invert the bits there. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240626-drm-panel-ili9881c-rotation-v1-1-e0ff54173e32@pengutronix.de Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240626-drm-panel-ili9881c-rotation-v1-1-e0ff54173e32@pengutronix.de
2024-10-09dt-bindings: display: panel-lvds: Add compatible for Jenson BL-JT60050-01AFrieder Schrempf
The Jenson BL-JT60050-01A is a 7" 1024x600 LVDS display. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240828074753.25401-3-frieder@fris.de Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240828074753.25401-3-frieder@fris.de
2024-10-09dt-bindings: vendor-prefixes: Add Jenson DisplayFrieder Schrempf
Add vendor prefix for manufacturer Jenson Display (http://jensondisplay.com). Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240828074753.25401-2-frieder@fris.de Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240828074753.25401-2-frieder@fris.de
2024-10-09Merge tag 'drm-misc-next-2024-09-26' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for v6.13: UAPI Changes: - panthor: Add realtime group priority and priority query. Cross-subsystem Changes: - Add Vivek Kasireddy as udmabuf maintainer. - Assorted udmabuf changes. - Device tree binding updates. - dmabuf documentation fixes. - Move drm_rect to drm core module from kms helper. Core Changes: - Update scheduler documentation and concurrency fixes. - drm/ci updates. - Add memory-agnostic fbdev client and client-agnostic setup helper. - Huge driver conversion for using the above. Driver Changes: - Assorted fixes to imx, panel/nt35510, sti, accel/ivpu, v3d, vkms, host1x. - Add panel quirks for AYA NEO panels. - Make module autoloading work for bridge/it6505 and mcde. - Add huge page support to v3d using a custom shmfs. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/a9b95e6f-9f35-464e-83f6-bda75b35ee0b@linux.intel.com
2024-10-09Merge tag 'drm-misc-next-2024-09-20' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for v6.12: UAPI Changes: - Add panthor/DEV_QUERY_TIMESTAMP_INFO query. Cross-subsystem Changes: - Updated dt bindings. - Add documentation explaining default errnos for fences. - Mark dma-buf heaps creation functions as __init. Core Changes: - Split DSC helpers from DP helpers. - Clang build fixes for drm/mm test. - Remove simple pipeline support for gem-vram, no longer any users left after converting bochs. - Add erno to drm_sched_start to distinguish between GPU and queue reset. - Add drm_framebuffer testcases. - Fix uninitialized spinlock acquisition with CONFIG_DRM_PANIC=n. - Use read_trylock instead of read_lock in dma_fence_begin_signalling to quiesce lockdep. Driver Changes: - Assorted small fixes and updates for tegra, host1x, imagination, nouveau, panfrost, panthor, panel/ili9341, mali, exynos, panel/samsung-s6e3fa7, ast, bridge/ti-sn65dsi86, panel/himax-hx83112a, bridge/tc358767, bridge/imx8mp-hdmi-tx, panel/khadas-ts050, panel/nt36523, panel/sony-acx565akm, kmb, accel/qaic, omap, v3d. - Add bridge/TI TDP158. - Assorted documentation updates. - Convert bochs from simple drm to gem shmem, and check modes against available memory. - Many VC4 fixes, most related to scaling and YUV support. - Convert some drivers to use SYSTEM_SLEEP_PM_OPS and RUNTIME_PM_OPS. - Rockchip 4k@60 support. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/445713a6-2427-4c53-8ec2-3a894ec62405@linux.intel.com
2024-10-08drm/xe/guc: Save manual engine capture into capture listZhanjun Dong
Save manual engine capture into capture list. This removes duplicate register definitions across manual-capture vs guc-err-capture. Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com> Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241004193428.3311145-7-zhanjun.dong@intel.com
2024-10-08drm/xe/guc: Plumb GuC-capture into dev coredumpZhanjun Dong
When we decide to kill a job, (from guc_exec_queue_timedout_job), we could end up with 4 possible scenarios at this starting point of this decision: 1. the guc-captured register-dump is already there. 2. the driver is wedged.mode > 1, so GuC-engine-reset / GuC-err-capture will not happen. 3. the user has started the driver in execlist-submission mode. 4. the guc-captured register-dump is not ready yet so we force GuC to kill that context now, but: A. we don't know yet if GuC will be successful on the engine-reset and get the guc-err-capture, else kmd will do a manual reset later OR B. guc will be successful and we will get a guc-err-capture shortly. So to accomdate the scenarios of 2 and 4A, we will need to do a manual KMD capture first(which is not be reliable in guc-submission mode) and decide later if we need to use that for the cases of 2 or 4A. So this flow is part of the implementation for this patch. Provide xe_guc_capture_get_reg_desc_list to get the register dscriptor list. Add manual capture by read from hw engine if GuC capture is not ready. If it becomes ready at later time, GuC sourced data will be used. Although there may only be a small delay between (1) the check for whether guc-err-capture is available at the start of guc_exec_queue_timedout_job and (2) the decision on using a valid guc-err-capture or manual-capture, lets not take any chances and lock the matching node down so it doesn't get re-claimed if GuC-Err-Capture subsystem is running out of pre-cached nodes. Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com> Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241004193428.3311145-6-zhanjun.dong@intel.com
generated by cgit (git 2.34.1) at 2025-09-09 08:37:57 +0000