summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-12-18Merge tag 'for-linus-20171218' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD fixes from Richard Weinberger: "This contains the following regression fixes: - fix bitflip handling in brcmnand and gpmi nand drivers - revert a bad device tree binding for spi-nor - fix a copy&paste error in gpio-nand driver - fix a too strict length check in mtd core" * tag 'for-linus-20171218' of git://git.infradead.org/linux-mtd: mtd: Fix mtd_check_oob_ops() mtd: nand: gpio: Fix ALE gpio configuration mtd: nand: brcmnand: Zero bitflip is not an error mtd: nand: gpmi: Fix failure when a erased page has a bitflip at BBM Revert "dt-bindings: mtd: add sst25wf040b and en25s64 to sip-nor list"
2017-12-19drm/nouveau: use alternate memory type for system-memory buffers with kind != 0Ben Skeggs
Fixes bug on Tegra where we'd strip kind information from system memory (ie. all) buffers, resulting in misrendering. Behaviour on dGPU should be unchanged. Reported-by: Thierry Reding <treding@nvidia.com> Fixes: d7722134b8 ("drm/nouveau: switch over to new memory and vmm interfaces") Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Tested-by: Thierry Reding <treding@nvidia.com>
2017-12-19drm/nouveau: avoid GPU page sizes > PAGE_SIZE for buffer objects in host memoryBen Skeggs
While the Tegra (GK20A, GM20B, GP10B) MMUs support large pages in host memory, we're currently lacking IOMMU support for merging system pages into large enough chunks to be mapped as such by the GPU. The core VMM code actually supports automatically determining the best page size to map with, which is intended for these situations, but for various complicated reasons the DRM is currently forcing the page size selection on a per-BO basis. This should fix breakage reported on Tegra GPUs in the meantime, until one or both of the above issues are resolved properly. Reported-by: Mikko Perttunen <cyndis@kapsi.fi> Fixes: 7dc6a446da7c ("drm/nouveau: improve selection of GPU page size") Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Tested-by: Thierry Reding <treding@nvidia.com>
2017-12-19drm/nouveau/mmu/gp10b: use correct implementationBen Skeggs
Reported-by: Mikko Perttunen <cyndis@kapsi.fi> Fixes: 6359c98224 ("drm/nouveau/mmu/gp10b: fork from gf100") Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Tested-by: Thierry Reding <treding@nvidia.com>
2017-12-19drm/nouveau/pci: do a msi rearm on initKarol Herbst
On my GP107 when I load nouveau after unloading it, for some reason the GPU stopped sending or the CPU stopped receiving interrupts if MSI was enabled. Doing a rearm once before getting any interrupts fixes this. Signed-off-by: Karol Herbst <kherbst@redhat.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-12-19drm/nouveau/imem/nv50: fix refcount_t warningBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-12-19drm/nouveau/bios/dp: support DP Info Table 2.0Ben Skeggs
Reported-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-12-19drm/nouveau/fbcon: fix NULL pointer access in nouveau_fbcon_destroyKarol Herbst
When the fbcon object is initialized, but nouveau_fbcon_create is not called, we run into a NULL pointer access within nouveau_fbcon_create when unloading nouveau. The call to drm_fb_helper_funcs.fb_probe is deferred until there is a display for real since 4.14, that's why fbcon->helper.fb is still not set. Signed-off-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-12-18drm/i915/cnl: Add support for horizontal plane flippingJoonas Lahtinen
CNL supports horizontal plane flipping on non-linear plane formats. v2: - Avoid BUG unlike elsewhere in the code (Ville) - Hoist the rotation-tiling restriction check (Ville) v3 (Rodrigo): - Rebased after a while. - Fix small indentation issues. Bspec: 7656 Suggested-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171215213800.7896-1-rodrigo.vivi@intel.com
2017-12-18drm/i915: Protect DDI port to DPLL map from theoretical race.Rodrigo Vivi
In case we have multiple modesets for different connectors happening in parallel we could have a race on the RMW on these shared registers. This possibility was initially raised by Paulo when reviewing commit '555e38d27317 ("drm/i915/cnl: DDI - PLL mapping")' but the original possibility comes from commit '5416d871136d ("drm/i915/skl: Set the eDP link rate on DPLL0")'. Or maybe later when atomic commits entered into picture. Apparently the discussion around this topic showed that the right solution would be on serializing the atomic commits in a way that we don't have the possibility of races here since if that parallel modeset happenings apparently many other things will be on fire. Code is there since SKL and there was no report of issue, but since we never looked back to that serialization possibility, and also we don't have an igt case for that it is better to at least protect this corner. Suggested-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Fixes: 555e38d27317 ("drm/i915/cnl: DDI - PLL mapping") Fixes: 5416d871136d ("drm/i915/skl: Set the eDP link rate on DPLL0") Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst maarten.lankhorst@linux.intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Maarten Lankhorst maarten.lankhorst@linux.intel.com Link: https://patchwork.freedesktop.org/patch/msgid/20171215224310.19103-1-rodrigo.vivi@intel.com
2017-12-18drm/i915/selftests: Fix up igt_reset_engineChris Wilson
Now that we skip a per-engine reset on an idle engine, we need to update the selftest to take that into account. In the process, we find that we were not stressing the per-engine reset very hard, so add those missing active resets. v2: Actually test i915_reset_engine() by loading it with requests. Fixes: f6ba181ada55 ("drm/i915: Skip an engine reset if it recovered before our preparations") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104313 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171217132852.30642-3-chris@chris-wilson.co.uk Reviewed-by: Michel Thierry <michel.thierry@intel.com>
2017-12-18Input: hideep - fix compile error due to missing include fileAnthony Kim
gpiod_() API requires including "linux/gpio/consumer.h". Also, we are not using the legacy API nor the static board files descriptions, so no need to include gpio.h nor gpio/machine.h. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Anthony Kim <anthony.kim@hideep.com> Patchwork-Id: 10094831 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-12-18block: fix blk_rq_append_bioJens Axboe
Commit caa4b02476e3(blk-map: call blk_queue_bounce from blk_rq_append_bio) moves blk_queue_bounce() into blk_rq_append_bio(), but don't consider the fact that the bounced bio becomes invisible to caller since the parameter type is 'struct bio *'. Make it a pointer to a pointer to a bio, so the caller sees the right bio also after a bounce. Fixes: caa4b02476e3 ("blk-map: call blk_queue_bounce from blk_rq_append_bio") Cc: Christoph Hellwig <hch@lst.de> Reported-by: Michele Ballabio <barra_cuda@katamail.com> (handling failure of blk_rq_append_bio(), only call bio_get() after blk_rq_append_bio() returns OK) Tested-by: Michele Ballabio <barra_cuda@katamail.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-12-18block: don't let passthrough IO go into .make_request_fn()Ming Lei
Commit a8821f3f3("block: Improvements to bounce-buffer handling") tries to make sure that the bio to .make_request_fn won't exceed BIO_MAX_PAGES, but ignores that passthrough I/O can use blk_queue_bounce() too. Especially, passthrough IO may not be sector-aligned, and the check of 'sectors < bio_sectors(*bio_orig)' inside __blk_queue_bounce() may become true even though the max bvec number doesn't exceed BIO_MAX_PAGES, then cause the bio splitted, and the original passthrough bio is submited to generic_make_request(). This patch fixes this issue by checking if the bio is passthrough IO, and use bio_kmalloc() to allocate the cloned passthrough bio. Cc: NeilBrown <neilb@suse.com> Fixes: a8821f3f3("block: Improvements to bounce-buffer handling") Tested-by: Michele Ballabio <barra_cuda@katamail.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-12-18drm/tilcdc: make tilcdc_mode_hvtotal() staticXiongwei Song
The function tilcdc_mode_hvtotal is local to the source and does not need to be in global scope, so make it static. drivers/gpu/drm/tilcdc/tilcdc_crtc.c:297:6: warning: no previous prototype for 'tilcdc_mode_hvtotal' [-Wmissing-prototypes] uint tilcdc_mode_hvtotal(const struct drm_display_mode *mode) Signed-off-by: Xiongwei Song <sxwjean@gmail.com> Signed-off-by: Jyri Sarha <jsarha@ti.com>
2017-12-18net: phy: xgene: disable clk on error pathsAlexey Khoroshilov
There are several error paths in xgene_mdio_probe(), where clk is left undisabled. The patch fixes them. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18sget(): handle failures of register_shrinker()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-12-18net: phy: marvell: avoid pause mode on SGMII-to-Copper for 88e151xRussell King
Observed on the 88e1512 in SGMII-to-Copper mode, negotiating pause is unreliable. While the pause bits can be set in the advertisment register, they clear shortly after negotiation with a link partner commences irrespective of the cause of the negotiation. While these bits may be correctly conveyed to the link partner on the first negotiation, a subsequent negotiation (eg, due to negotiation restart by the link partner, or reconnection of the cable) will result in the link partner seeing these bits as zero, while the kernel believes that it has advertised pause modes. This leads to the local kernel evaluating (eg) symmetric pause mode, while the remote end evaluates that we have no pause mode capability. Since we can't guarantee the advertisment, disable pause mode support with this PHY when used in SGMII-to-Copper mode. The 88e1510 in RGMII-to-Copper mode appears to behave correctly. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18mm,vmscan: Make unregister_shrinker() no-op if register_shrinker() failed.Tetsuo Handa
Syzbot caught an oops at unregister_shrinker() because combination of commit 1d3d4437eae1bb29 ("vmscan: per-node deferred work") and fault injection made register_shrinker() fail and the caller of register_shrinker() did not check for failure. ---------- [ 554.881422] FAULT_INJECTION: forcing a failure. [ 554.881422] name failslab, interval 1, probability 0, space 0, times 0 [ 554.881438] CPU: 1 PID: 13231 Comm: syz-executor1 Not tainted 4.14.0-rc8+ #82 [ 554.881443] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 [ 554.881445] Call Trace: [ 554.881459] dump_stack+0x194/0x257 [ 554.881474] ? arch_local_irq_restore+0x53/0x53 [ 554.881486] ? find_held_lock+0x35/0x1d0 [ 554.881507] should_fail+0x8c0/0xa40 [ 554.881522] ? fault_create_debugfs_attr+0x1f0/0x1f0 [ 554.881537] ? check_noncircular+0x20/0x20 [ 554.881546] ? find_next_zero_bit+0x2c/0x40 [ 554.881560] ? ida_get_new_above+0x421/0x9d0 [ 554.881577] ? find_held_lock+0x35/0x1d0 [ 554.881594] ? __lock_is_held+0xb6/0x140 [ 554.881628] ? check_same_owner+0x320/0x320 [ 554.881634] ? lock_downgrade+0x990/0x990 [ 554.881649] ? find_held_lock+0x35/0x1d0 [ 554.881672] should_failslab+0xec/0x120 [ 554.881684] __kmalloc+0x63/0x760 [ 554.881692] ? lock_downgrade+0x990/0x990 [ 554.881712] ? register_shrinker+0x10e/0x2d0 [ 554.881721] ? trace_event_raw_event_module_request+0x320/0x320 [ 554.881737] register_shrinker+0x10e/0x2d0 [ 554.881747] ? prepare_kswapd_sleep+0x1f0/0x1f0 [ 554.881755] ? _down_write_nest_lock+0x120/0x120 [ 554.881765] ? memcpy+0x45/0x50 [ 554.881785] sget_userns+0xbcd/0xe20 (...snipped...) [ 554.898693] kasan: CONFIG_KASAN_INLINE enabled [ 554.898724] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 554.898732] general protection fault: 0000 [#1] SMP KASAN [ 554.898737] Dumping ftrace buffer: [ 554.898741] (ftrace buffer empty) [ 554.898743] Modules linked in: [ 554.898752] CPU: 1 PID: 13231 Comm: syz-executor1 Not tainted 4.14.0-rc8+ #82 [ 554.898755] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 [ 554.898760] task: ffff8801d1dbe5c0 task.stack: ffff8801c9e38000 [ 554.898772] RIP: 0010:__list_del_entry_valid+0x7e/0x150 [ 554.898775] RSP: 0018:ffff8801c9e3f108 EFLAGS: 00010246 [ 554.898780] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 554.898784] RDX: 0000000000000000 RSI: ffff8801c53c6f98 RDI: ffff8801c53c6fa0 [ 554.898788] RBP: ffff8801c9e3f120 R08: 1ffff100393c7d55 R09: 0000000000000004 [ 554.898791] R10: ffff8801c9e3ef70 R11: 0000000000000000 R12: 0000000000000000 [ 554.898795] R13: dffffc0000000000 R14: 1ffff100393c7e45 R15: ffff8801c53c6f98 [ 554.898800] FS: 0000000000000000(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 [ 554.898804] CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 [ 554.898807] CR2: 00000000dbc23000 CR3: 00000001c7269000 CR4: 00000000001406e0 [ 554.898813] DR0: 0000000020000000 DR1: 0000000020000000 DR2: 0000000000000000 [ 554.898816] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 [ 554.898818] Call Trace: [ 554.898828] unregister_shrinker+0x79/0x300 [ 554.898837] ? perf_trace_mm_vmscan_writepage+0x750/0x750 [ 554.898844] ? down_write+0x87/0x120 [ 554.898851] ? deactivate_super+0x139/0x1b0 [ 554.898857] ? down_read+0x150/0x150 [ 554.898864] ? check_same_owner+0x320/0x320 [ 554.898875] deactivate_locked_super+0x64/0xd0 [ 554.898883] deactivate_super+0x141/0x1b0 ---------- Since allowing register_shrinker() callers to call unregister_shrinker() when register_shrinker() failed can simplify error recovery path, this patch makes unregister_shrinker() no-op when register_shrinker() failed. Also, reset shrinker->nr_deferred in case unregister_shrinker() was by error called twice. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Aliaksei Karaliou <akaraliou.dev@gmail.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Glauber Costa <glauber@scylladb.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-12-18Merge branch 'parisc-4.15-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: "There are two important fixes here: - Add PCI quirks to disable built-in a serial AUX and a graphics cards from specific GSP (management board) PCI cards. This fixes boot via serial console on rp3410 and rp3440 machines. - Revert the "Re-enable interrups early" patch which was added to kernel v4.10. It can trigger stack overflows and thus silent data corruption. With this patch reverted we can lower our thread stack back to 16kb again. The other patches are minor cleanups: avoid duplicate includes, indenting fixes, correctly align variable in asm code" * 'parisc-4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Reduce thread stack to 16 kb Revert "parisc: Re-enable interrupts early" parisc: remove duplicate includes parisc: Hide Diva-built-in serial aux and graphics card parisc: Align os_hpmc_size on word boundary parisc: Fix indenting in puts()
2017-12-18net: bridge: fix early call to br_stp_change_bridge_id and plug newlink leaksNikolay Aleksandrov
The early call to br_stp_change_bridge_id in bridge's newlink can cause a memory leak if an error occurs during the newlink because the fdb entries are not cleaned up if a different lladdr was specified, also another minor issue is that it generates fdb notifications with ifindex = 0. Another unrelated memory leak is the bridge sysfs entries which get added on NETDEV_REGISTER event, but are not cleaned up in the newlink error path. To remove this special case the call to br_stp_change_bridge_id is done after netdev register and we cleanup the bridge on changelink error via br_dev_delete to plug all leaks. This patch makes netlink bridge destruction on newlink error the same as dellink and ioctl del which is necessary since at that point we have a fully initialized bridge device. To reproduce the issue: $ ip l add br0 address 00:11:22:33:44:55 type bridge group_fwd_mask 1 RTNETLINK answers: Invalid argument $ rmmod bridge [ 1822.142525] ============================================================================= [ 1822.143640] BUG bridge_fdb_cache (Tainted: G O ): Objects remaining in bridge_fdb_cache on __kmem_cache_shutdown() [ 1822.144821] ----------------------------------------------------------------------------- [ 1822.145990] Disabling lock debugging due to kernel taint [ 1822.146732] INFO: Slab 0x0000000092a844b2 objects=32 used=2 fp=0x00000000fef011b0 flags=0x1ffff8000000100 [ 1822.147700] CPU: 2 PID: 13584 Comm: rmmod Tainted: G B O 4.15.0-rc2+ #87 [ 1822.148578] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 1822.150008] Call Trace: [ 1822.150510] dump_stack+0x78/0xa9 [ 1822.151156] slab_err+0xb1/0xd3 [ 1822.151834] ? __kmalloc+0x1bb/0x1ce [ 1822.152546] __kmem_cache_shutdown+0x151/0x28b [ 1822.153395] shutdown_cache+0x13/0x144 [ 1822.154126] kmem_cache_destroy+0x1c0/0x1fb [ 1822.154669] SyS_delete_module+0x194/0x244 [ 1822.155199] ? trace_hardirqs_on_thunk+0x1a/0x1c [ 1822.155773] entry_SYSCALL_64_fastpath+0x23/0x9a [ 1822.156343] RIP: 0033:0x7f929bd38b17 [ 1822.156859] RSP: 002b:00007ffd160e9a98 EFLAGS: 00000202 ORIG_RAX: 00000000000000b0 [ 1822.157728] RAX: ffffffffffffffda RBX: 00005578316ba090 RCX: 00007f929bd38b17 [ 1822.158422] RDX: 00007f929bd9ec60 RSI: 0000000000000800 RDI: 00005578316ba0f0 [ 1822.159114] RBP: 0000000000000003 R08: 00007f929bff5f20 R09: 00007ffd160e8a11 [ 1822.159808] R10: 00007ffd160e9860 R11: 0000000000000202 R12: 00007ffd160e8a80 [ 1822.160513] R13: 0000000000000000 R14: 0000000000000000 R15: 00005578316ba090 [ 1822.161278] INFO: Object 0x000000007645de29 @offset=0 [ 1822.161666] INFO: Object 0x00000000d5df2ab5 @offset=128 Fixes: 30313a3d5794 ("bridge: Handle IFLA_ADDRESS correctly when creating bridge device") Fixes: 5b8d5429daa0 ("bridge: netlink: register netdevice before executing changelink") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18sctp: add SCTP_CID_RECONF conversion in sctp_cnameXin Long
Whenever a new type of chunk is added, the corresp conversion in sctp_cname should be added. Otherwise, in some places, pr_debug will print it as "unknown chunk". Fixes: cc16f00f6529 ("sctp: add support for generating stream reconf ssn reset request chunk") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo R. Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18sctp: fix the issue that a __u16 variable may overflow in sctp_ulpq_renegeXin Long
Now when reneging events in sctp_ulpq_renege(), the variable freed could be increased by a __u16 value twice while freed is of __u16 type. It means freed may overflow at the second addition. This patch is to fix it by using __u32 type for 'freed', while at it, also to remove 'if (chunk)' check, as all renege commands are generated in sctp_eat_data and it can't be NULL. Reported-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18net: qcom/emac: Change the order of mac up and sgmii openHemanth Puranik
This patch fixes the order of mac_up and sgmii_open for the reasons noted below: - If open takes more time(if the SGMII block is not responding or if we want to do some delay based task) in this situation we will hit NETDEV watchdog - The main reason : We should signal to upper layers that we are ready to receive packets "only" when the entire path is initialized not the other way around, this is followed in the reset path where we do mac_down, sgmii_reset and mac_up. This also makes the driver uniform across the reset and open paths. - In the future there may be need for delay based tasks to be done in sgmii open which will result in NETDEV watchdog - As per the documentation the order of init should be sgmii, mac, rings and DMA Signed-off-by: Hemanth Puranik <hpuranik@codeaurora.org> Acked-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18net: phy: marvell: Limit 88m1101 autoneg errata to 88E1145 as well.Zhao Qiang
88E1145 also need this autoneg errata. Fixes: f2899788353c ("net: phy: marvell: Limit errata to 88m1101") Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18tipc: remove leaving group member from all listsJon Maloy
A group member going into state LEAVING should never go back to any other state before it is finally deleted. However, this might happen if the socket needs to send out a RECLAIM message during this interval. Since we forget to remove the leaving member from the group's 'active' or 'pending' list, the member might be selected for reclaiming, change state to RECLAIMING, and get stuck in this state instead of being deleted. This might lead to suppression of the expected 'member down' event to the receiver. We fix this by removing the member from all lists, except the RB tree, at the moment it goes into state LEAVING. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18tipc: fix lost member events bugJon Maloy
Group messages are not supposed to be returned to sender when the destination socket disappears. This is done correctly for regular traffic messages, by setting the 'dest_droppable' bit in the header. But we forget to do that in group protocol messages. This has the effect that such messages may sometimes bounce back to the sender, be perceived as a legitimate peer message, and wreak general havoc for the rest of the session. In particular, we have seen that a member in state LEAVING may go back to state RECLAIMED or REMITTED, hence causing suppression of an otherwise expected 'member down' event to the user. We fix this by setting the 'dest_droppable' bit even in group protocol messages. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18Merge tag 'perf-urgent-for-mingo-4.15-20171218' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: - Fix up build in hardened environments, such as fedora 27 (Jiri Olsa) - Do not include header files from the kernel sources for the s/390 arch, fixing the detached tarball building (Arnaldo Carvalho de Melo) - Allow again using asm.h when building for the 'bpf' clang target, guarding x86 specific bits under ifndef __BPF__ (Arnaldo Carvalho de Melo) - Generate correct debug information for inlined code when generating ELF images for JITted java programs (Ben Gainey) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-18Merge branch 'WIP.x86-pti.entry-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 syscall entry code changes for PTI from Ingo Molnar: "The main changes here are Andy Lutomirski's changes to switch the x86-64 entry code to use the 'per CPU entry trampoline stack'. This, besides helping fix KASLR leaks (the pending Page Table Isolation (PTI) work), also robustifies the x86 entry code" * 'WIP.x86-pti.entry-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits) x86/cpufeatures: Make CPU bugs sticky x86/paravirt: Provide a way to check for hypervisors x86/paravirt: Dont patch flush_tlb_single x86/entry/64: Make cpu_entry_area.tss read-only x86/entry: Clean up the SYSENTER_stack code x86/entry/64: Remove the SYSENTER stack canary x86/entry/64: Move the IST stacks into struct cpu_entry_area x86/entry/64: Create a per-CPU SYSCALL entry trampoline x86/entry/64: Return to userspace from the trampoline stack x86/entry/64: Use a per-CPU trampoline stack for IDT entries x86/espfix/64: Stop assuming that pt_regs is on the entry stack x86/entry/64: Separate cpu_current_top_of_stack from TSS.sp0 x86/entry: Remap the TSS into the CPU entry area x86/entry: Move SYSENTER_stack to the beginning of struct tss_struct x86/dumpstack: Handle stack overflow on all stacks x86/entry: Fix assumptions that the HW TSS is at the beginning of cpu_tss x86/kasan/64: Teach KASAN about the cpu_entry_area x86/mm/fixmap: Generalize the GDT fixmap mechanism, introduce struct cpu_entry_area x86/entry/gdt: Put per-CPU GDT remaps in ascending order x86/dumpstack: Add get_stack_info() support for the SYSENTER stack ...
2017-12-18Revert "drm/amd/amdgpu: set gtt size according to system memory size only"Andrey Grodzovsky
This reverts commit ba851eed895c76be0eb4260bdbeb7e26f9ccfaa2. With that change piglit max size tests (running with -t max.*size) are causing OOM and hard hang on my CZ with 1GB RAM. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Roger He <Hongbo.He@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-18MAINTAINERS: add separate entry for DRM TTM v2Christian König
AMD is the major user of TTM, so it also makes sense that we maintain it. v2: mention Alex git tree as well Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-18drm/amdgpu: implement 2+1 PD support for Raven v3Christian König
Instead of falling back to 2 level and very limited address space use 2+1 PD support and 128TB + 512GB of virtual address space. v2: cleanup defines, rebase on top of level enum v3: fix inverted check in hardware setup Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-and-Tested-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-18drm/ttm: cleanup some old definesChristian König
Use pr_debug instead of TTM_DEBUG, fix the lockdep assert and remove the unused constant. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Roger He <Hongbo.He@amd.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-18drm/ttm: cleanup some more resv->lock usesChristian König
Use the reservation wrapper for this. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Roger He <Hongbo.He@amd.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-18drm/ttm: use try_lock in ttm_bo_delayed_delete againChristian König
We only need to wait for the contended lock when the reservation object is shared or when we want to remove everything. A trylock should be sufficient in all other cases. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Roger He <Hongbo.He@amd.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-18drm/amdgpu: restore uvd fence seq in uvd resumeJim Qu
otherwise, uvd block will be never powered up in ring begin_use() callback. uvd ring test will be fail in resume in rumtime pm. Signed-off-by: Jim Qu <Jim.Qu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-18drm/amdgpu: always cancel uvd idle handler in uvd suspendJim Qu
Signed-off-by: Jim Qu <Jim.Qu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-18drm/i915/trace: add hw_id to gem requests trace pointsLionel Landwerlin
When monitoring the GPU with i915 perf, reports are tagged with a hw id. Gem context creation tracepoints already have a hw_id field, unfortunately you only get this correlation between a process id and a hw context id once when the context is created. It doesn't help if you started monitoring after the process was initialized or if the drm fd was transfered from one process to another. This change adds the hw_id field to gem requests, so that correlation can also be done on submission. v2: Place hw_id at the end of the tracepoint to not disrupt too much existing tools (Chris) v3: Reorder hw_id field again (Chris) v4: Add missing hw_id to i915_gem_request_wait_begin tracepoint (Chris) Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171218151959.14073-3-lionel.g.landwerlin@intel.com
2017-12-18drm/i915: reorder field in gem_request tracepointsLionel Landwerlin
Let's make the order of the fields of the tracepoints involving gem request match across i915. This makes userspace processing of tracepoint a bit easier. Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171218151959.14073-2-lionel.g.landwerlin@intel.com
2017-12-18drm/amdgpu: rename amdgpu_get_pcie_infoAlex Deucher
add device to the name for consistency. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-18drm/amdgpu: move amdgpu_need_backup to amdgpu_object.cAlex Deucher
It's the only place it's used. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-18drm/amdgpu: rename amdgpu_gpu_recoverAlex Deucher
add device to the name for consistency. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-18drm/amdgpu: move dummy page functions to amdgpu_gart.cAlex Deucher
It's the only place they are used. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-18drm/amdgpu: rename amdgpu_need_postAlex Deucher
add device to the name for consistency. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-18drm/amdgpu: rename ip block helper functionsAlex Deucher
add device to the name for consistency. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-18drm/amdgpu: move fw_reserve functions to amdgpu_ttm.cAlex Deucher
It's the only place they are used. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-18drm/amdgpu: rename amdgpu_*_location functionsAlex Deucher
add device to the name for consistency. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-18drm/amdgpu: move amdgpu_doorbell_get_kfd_info to amdgpu_amdkfd.cAlex Deucher
It's the only place it's used. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-18drm/amdgpu: rename amdgpu_pci_config_resetAlex Deucher
add device for consistency with other functions in this file. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-18drm/amdgpu: rename amdgpu_program_register_sequenceAlex Deucher
add device for consistency with other functions in this file. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-15 09:24:29 +0000