| Age | Commit message (Collapse) | Author |
|---|
|
When SHAMPO is used, a receive queue currently almost always leaks one
page on shutdown.
A page has MLX5E_SHAMPO_WQ_HEADER_PER_PAGE (8) headers. These headers
are tracked in the SHAMPO bitmap. Each page is released when the last
header index in the group is processed. During header allocation, there
can be leftovers from a page that will be used in a subsequent
allocation. This is normally fine, except for the following scenario
(simplified a bit):
1) Allocate N new page fragments, showing only the relevant last 4
fragments:
0: new page
1: new page
2: new page
3: new page
4: page from previous allocation
5: page from previous allocation
6: page from previous allocation
7: page from previous allocation
2) NAPI processes header indices 4-7 because they are the oldest
allocated. Bit 7 will be set to 0.
3) Receive queue shutdown occurs. All the remaining bits are being
iterated on to release the pages. But the page assigned to header
indices 0-3 will not be freed due to what happened in step 2.
This patch fixes the issue by making sure that on allocation, header
fragments are always allocated in groups of
MLX5E_SHAMPO_WQ_HEADER_PER_PAGE so that there is never a partial page
left over between allocations.
A more appropriate fix would be a refactoring of
mlx5e_alloc_rx_hd_mpwqe() and mlx5e_build_shampo_hd_umr(). But this
refactoring is too big for net. It will be targeted for net-next.
Fixes: e839ac9a89cb ("net/mlx5e: SHAMPO, Simplify header page release in teardown")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20240815071611.2211873-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull block fixes from Jens Axboe:
- Fix corruption issues with s390/dasd (Eric, Stefan)
- Fix a misuse of non irq locking grab of a lock (Li)
- MD pull request with a single data corruption fix for raid1 (Yu)
* tag 'block-6.11-20240824' of git://git.kernel.dk/linux:
block: Fix lockdep warning in blk_mq_mark_tag_wait
md/raid1: Fix data corruption for degraded array with slow disk
s390/dasd: fix error recovery leading to data corruption on ESE devices
s390/dasd: Remove DMA alignment
|
|
Pull io_uring fixes from Jens Axboe:
- Fix a comment in the uapi header using the wrong member name (Caleb)
- Fix KCSAN warning for a debug check in sqpoll (me)
- Two more NAPI tweaks (Olivier)
* tag 'io_uring-6.11-20240824' of git://git.kernel.dk/linux:
io_uring: fix user_data field name in comment
io_uring/sqpoll: annotate debug task == current with data_race()
io_uring/napi: remove duplicate io_napi_entry timeout assignation
io_uring/napi: check napi_enabled in io_napi_add() before proceeding
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix a possible (but unlikely) out-of-bounds read in interrupts
parsing code
- Add AT25 EEPROM "fujitsu,mb85rs256" compatible
- Update Konrad Dybcio's email
* tag 'devicetree-fixes-for-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of/irq: Prevent device address out-of-bounds read in interrupt map walk
dt-bindings: eeprom: at25: add fujitsu,mb85rs256 compatible
dt-bindings: Batch-update Konrad Dybcio's email
|
|
Although there are several patches improving the extent map shrinker,
there are still reports of too frequent shrinker behavior, taking too
much CPU for the kswapd process.
So let's only enable extent shrinker for now, until we got more
comprehensive understanding and a better solution.
Link: https://lore.kernel.org/linux-btrfs/3df4acd616a07ef4d2dc6bad668701504b412ffc.camel@intelfx.name/
Link: https://lore.kernel.org/linux-btrfs/c30fd6b3-ca7a-4759-8a53-d42878bf84f7@gmail.com/
Fixes: 956a17d9d050 ("btrfs: add a shrinker for extent maps")
CC: stable@vger.kernel.org # 6.10+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"Fix a Bang-bang thermal governor issue causing it to fail to reset the
state of cooling devices if they are 'on' to start with, but the
thermal zone temperature is always below the corresponding trip point
(Rafael Wysocki)"
* tag 'thermal-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: gov_bang_bang: Use governor_data to reduce overhead
thermal: gov_bang_bang: Add .manage() callback
thermal: gov_bang_bang: Split bang_bang_control()
thermal: gov_bang_bang: Call __thermal_cdev_update() directly
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix an issue related to the ACPI EC device handling that causes the
_REG control method to be evaluated for EC operation regions that are
not expected to be used.
This confuses the platform firmware and provokes various types of
misbehavior on some systems (Rafael Wysocki)"
* tag 'acpi-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: EC: Evaluate _REG outside the EC scope more carefully
ACPICA: Add a depth argument to acpi_execute_reg_methods()
Revert "ACPI: EC: Evaluate orphan _REG under EC device"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fix from Ira Weiny:
"Commit f467fee48da4 ("block: move the dax flag to queue_limits") broke
the DAX tests by skipping over the legacy pmem mapping pages case.
Set the DAX flag in this case as well"
* tag 'libnvdimm-fixes-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm/pmem: Set dax flag for all 'PFN_MAP' cases
|
|
io_uring_cqe's user_data field refers to `sqe->data`, but io_uring_sqe
does not have a data field. Fix the comment to say `sqe->user_data`.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Link: https://github.com/axboe/liburing/pull/1206
Link: https://lore.kernel.org/r/20240816181526.3642732-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Stop waiting for the KIQ to return back when there is a reset pending.
It's quite likely that the KIQ will never response.
Signed-off-by: Koenig Christian <Christian.Koenig@amd.com>
Suggested-by: Lazar Lijo <Lijo.Lazar@amd.com>
Tested-by: Victor Skvortsov <victor.skvortsov@amd.com>
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This commit makes enforce_isolation setting to be per GPU and per
partition by adding the enforce_isolation array to the adev structure.
The adev variable is set based on the global enforce_isolation module
parameter during device initialization.
In amdgpu_ids.c, the adev->enforce_isolation value for the current GPU
is used to determine whether to enforce isolation between graphics and
compute processes on that GPU.
In amdgpu_ids.c, the adev->enforce_isolation value for the current GPU
and partition is used to determine whether to enforce isolation between
graphics and compute processes on that GPU and partition.
This allows the enforce_isolation setting to be controlled individually
for each GPU and each partition, which is useful in a system with
multiple GPUs and partitions where different isolation settings might be
desired for different GPUs and partitions.
v2: fix loop in amdgpu_vmid_mgr_init() (Alex)
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
|
|
This commit introduces the emission of a cleaner shader at the end of
the IB submission process. This is achieved by adding a new function
pointer, `emit_cleaner_shader`, to the `amdgpu_ring_funcs` structure. If
the `emit_cleaner_shader` function is set in the ring functions, it is
called during the VM flush process.
The cleaner shader is only emitted if the `enable_cleaner_shader` flag
is set in the `amdgpu_device` structure. This allows the cleaner shader
emission to be controlled on a per-device basis.
By emitting a cleaner shader at the end of the IB submission, we can
ensure that the VM state is properly cleaned up after each submission.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
|
|
The cleaner shader is used by the CP firmware to clean LDS and GPRs
between processes on the CUs.
This adds an internal API for GFX IP code to allocate and initialize the
cleaner shader.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
|
|
Some chips have more than one gfxhub so check if we
are a gfxhub rather than just gfxhub 0.
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The workaround seems to cause stability issues on other
SDMA 5.2.x IPs.
Fixes: a03ebf116303 ("drm/amdgpu/sdma5.2: Update wptr registers as well as doorbell")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3556
Acked-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add support for logging the registers in devcoredump
buffer for vcn_v2_6.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add support for logging the registers in devcoredump
buffer for vcn_v2_5.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add support of vcn ip dump in the devcoredump
for vcn_v2_5.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add support for logging the registers in devcoredump
buffer for vcn_v2_0.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add support of vcn ip dump in the devcoredump
for vcn_v2_0.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add support for logging the registers in devcoredump
buffer for vcn_v1_0.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add support of vcn ip dump in the devcoredump
for vcn_v1_0.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add support for logging the registers in devcoredump
buffer for vcn_v4_0_5.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add support for logging the registers in devcoredump
buffer for vcn_v4_0.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add support for logging the registers in devcoredump
buffer for vcn_v4_0_3.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add support of vcn ip dump in the devcoredump
for vcn_v4_0_5.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add support of vcn ip dump in the devcoredump
for vcn_v4_0.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add support of vcn ip dump in the devcoredump
for vcn_v4_0_3.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add support for logging the registers in devcoredump
buffer for vcn_v5_0.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add API for resetting user queues.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add API for resetting user queues.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add API for resetting user queues.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It will be used by the queue reset code.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This will be used in more places in the future so
add a mutex.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Need to enter safe mode before touching GC MMIO.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add ring reset callback for gfx.
v2: fix operator precedence (kernel test robot)
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add ring reset callback for gfx.
v2: fix operator precedence (kernel test robot)
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Pull rust fixes from Miguel Ojeda:
- Fix '-Os' Rust 1.80.0+ builds adding more intrinsics (also tweaked in
upstream Rust for the upcoming 1.82.0).
- Fix support for the latest version of rust-analyzer due to a change
on rust-analyzer config file semantics (considered a fix since most
developers use the latest version of the tool, which is the only one
actually supported by upstream). I am discussing stability of the
config file with upstream -- they may be able to start versioning it.
- Fix GCC 14 builds due to '-fmin-function-alignment' not skipped for
libclang (bindgen).
- A couple Kconfig fixes around '{RUSTC,BINDGEN}_VERSION_TEXT' to
suppress error messages in a foreign architecture chroot and to use a
proper default format.
- Clean 'rust-analyzer' target warning due to missing recursive make
invocation mark.
- Clean Clippy warning due to missing indentation in docs.
- Clean LLVM 19 build warning due to removed 3dnow feature upstream.
* tag 'rust-fixes-6.11' of https://github.com/Rust-for-Linux/linux:
rust: x86: remove `-3dnow{,a}` from target features
kbuild: rust-analyzer: mark `rust_is_available.sh` invocation as recursive
rust: add intrinsics to fix `-Os` builds
kbuild: rust: skip -fmin-function-alignment in bindgen flags
rust: Support latest version of `rust-analyzer`
rust: macros: indent list item in `module!`'s docs
rust: fix the default format for CONFIG_{RUSTC,BINDGEN}_VERSION_TEXT
rust: suppress error messages from CONFIG_{RUSTC,BINDGEN}_VERSION_TEXT
|
|
Add support of vcn ip dump in the devcoredump
for vcn_v5_0.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add support for logging the registers in devcoredump
buffer for vcn_v3_0.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add support of vcn ip dump in the devcoredump
for vcn_v3_0.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add pointer to the vcn ip dump in the vcn global structure
to be accessible for all vcn version via global adev.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
amdgpu_gart_table_vram_pin() and amdgpu_gart_table_vram_unpin() has
been removed since commit 575e55ee4fbc ("drm/amdgpu: recover gart table
at resume") remain the declarations untouched in the header files.
Besides, amdgpu_dm_display_resume() has also beed removed since
commit a80aa93de1a0 ("drm/amd/display: Unify dm resume sequence into a
single call"). So, let's remove this unused declarations.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Several cs track offsets (such as 'track->db_s_read_offset')
either are initialized with or plainly take big enough values that,
once shifted 8 bits left, may be hit with integer overflow if the
resulting values end up going over u32 limit.
Same goes for a few instances of 'surf.layer_size * mslice'
multiplications that are added to 'offset' variable - they may
potentially overflow as well and need to be validated properly.
While some debug prints in this code section take possible overflow
issues into account, simply casting to (unsigned long) may be
erroneous in its own way, as depending on CPU architecture one is
liable to get different results.
Fix said problems by:
- casting 'offset' to fixed u64 data type instead of
ambiguous unsigned long.
- casting one of the operands in vulnerable to integer
overflow cases to u64.
- adjust format specifiers in debug prints to properly
represent 'offset' values.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 285484e2d55e ("drm/radeon: add support for evergreen/ni tiling informations v11")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Skip rlc firmware validation to ignore firmware header size mismatch issues.
This restores the workaround added in
commit 849e133c973c ("drm/amdgpu: Fix the null pointer when load rlc firmware")
Fixes: 3af2c80ae2f5 ("drm/amdgpu: refine gfx10 firmware loading")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3551
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remove ME0 registers from MI300 gfx_9_4_3 ipdump
MI300 does not have gfx ME and hence those register
are just empty one and could be dropped.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Protect the MMIO access with safe mode.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Protect the MMIO access with safe mode.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Rather than open coding it for the queue reset.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Rather than open coding it for the queue reset.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
