| Age | Commit message (Collapse) | Author |
|---|
|
There is another cause for soft lock-up of GPU in empty ring-buffer:
race between GPU executing last commands and CPU checking ring for
emptiness. On GPU side IRQ for retire is triggered by CACHE_FLUSH_TS
event and RPTR shadow (which is used to check ring emptiness) is updated
a bit later from CP_CONTEXT_SWITCH_YIELD. Thus if GPU is executing its
last commands slow enough or we check that ring too fast we will miss a
chance to trigger switch to lower priority ring because current ring isn't
empty just yet. This can escalate to lock-up situation described in
previous patch.
To work-around this issue we keep track of last submit sequence number
for each ring and compare it with one written to memptrs from GPU during
execution of CACHE_FLUSH_TS event.
Fixes: b1fc2839d2f9 ("drm/msm: Implement preemption for A5XX targets")
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/612047/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
On A5XX GPUs when preemption is used it's invietable to enter a soft
lock-up state in which GPU is stuck at empty ring-buffer doing nothing.
This appears as full UI lockup and not detected as GPU hang (because
it's not). This happens due to not triggering preemption when it was
needed. Sometimes this state can be recovered by some new submit but
generally it won't happen because applications are waiting for old
submits to retire.
One of the reasons why this happens is a race between a5xx_submit and
a5xx_preempt_trigger called from IRQ during submit retire. Former thread
updates ring->cur of previously empty and not current ring right after
latter checks it for emptiness. Then both threads can just exit because
for first one preempt_state wasn't NONE yet and for second one all rings
appeared to be empty.
To prevent such situations from happening we need to establish guarantee
for preempt_trigger to make decision after each submit or retire. To
implement this we serialize preemption initiation using spinlock. If
switch is already in progress we need to re-trigger preemption when it
finishes.
Fixes: b1fc2839d2f9 ("drm/msm: Implement preemption for A5XX targets")
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/612045/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Two fields of preempt_record which are used by CP aren't reset on
resume: "data" and "info". This is the reason behind faults which happen
when we try to switch to the ring that was active last before suspend.
In addition those faults can't be recovered from because we use suspend
and resume to do so (keeping values of those fields again).
Fixes: b1fc2839d2f9 ("drm/msm: Implement preemption for A5XX targets")
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/612043/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Fine grain preemption (switching from/to points within submits)
requires extra handling in command stream of those submits, especially
when rendering with tiling (using GMEM). However this handling is
missing at this point in mesa (and always was). For this reason we get
random GPU faults and hangs if more than one priority level is used
because local preemption is enabled prior to executing command stream
from submit.
With that said it was ahead of time to enable local preemption by
default considering the fact that even on downstream kernel it is only
enabled if requested via UAPI.
Fixes: a7a4c19c36de ("drm/msm/a5xx: fix setting of the CP_PREEMPT_ENABLE_LOCAL register")
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/612041/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
There are some cases, such as the one uncovered by Commit 46d4efcccc68
("drm/msm/a6xx: Avoid a nullptr dereference when speedbin setting fails")
where
msm_gpu_cleanup() : platform_set_drvdata(gpu->pdev, NULL);
is called on gpu->pdev == NULL, as the GPU device has not been fully
initialized yet.
Turns out that there's more than just the aforementioned path that
causes this to happen (e.g. the case when there's speedbin data in the
catalog, but opp-supported-hw is missing in DT).
Assigning msm_gpu->pdev earlier seems like the least painful solution
to this, therefore do so.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/602742/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
In adreno_request_fw() when debugging information is printed to the log
after firmware load, an incorrect filename is printed. 'newname' is used
instead of 'fwname', so prefix "qcom/" is being added to filename.
Looks like "copy-paste" mistake.
Fix this mistake by replacing 'newname' with 'fwname'.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 2c41ef1b6f7d ("drm/msm/adreno: deal with linux-firmware fw paths")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/602382/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Make it match the MDSS settings for sc8180x and downstream.
Note that without the previous commit that exposes the value of
macrotile_mode to mesa, this will break mesa which expects the legacy
default value of 0. Therefore we do *not* want to backport it.
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/607398/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
This adds extra parameters that affect UBWC tiling that will be used by
the Mesa implementation of VK_EXT_host_image_copy.
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/607401/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
According to downstream we should be setting RBBM_NC_MODE_CNTL to a
non-default value on a663 and a680, we don't support a663 and on a680
we're leaving it at the wrong (suboptimal) value. Just set it on all
GPUs. Similarly, plumb through level2_swizzling_dis which will be
necessary on a663.
ubwc_mode is expanded and renamed to ubwc_swizzle to match the name on
the display side. Similarly macrotile_mode should match the display
side.
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/607397/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Update to Mesa commit 36a13d2b3b0 ("freedreno: fix a7xx perfcntr
countables").
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/607395/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
This was missed because we weren't using the a750-specific indexed regs.
Fixes: f3f8207d8aed ("drm/msm: Add devcoredump support for a750")
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/607394/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
This was missed thanks to the family mixup fixed in the previous commit.
Fixes: f3f8207d8aed ("drm/msm: Add devcoredump support for a750")
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/607393/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
With a7xx, we need to import a new header for each new generation and
switch to a different list of registers, instead of making
backwards-compatible changes. Using the helpers inadvertently made a750
use the a740 list of registers, instead use the family directly to fix
this.
Fixes: f3f8207d8aed ("drm/msm: Add devcoredump support for a750")
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/607392/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
The Adreno A615 is used in SDM670. Add an entry to support it.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/607238/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
According to downstream, A642L's speedbin is 129 and uses 4 as index
Signed-off-by: Eugene Lepshy <fekz115@gmail.com>
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/606722/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
This was added in commit ec446d09366c ("drm/msm: call
drm_atomic_helper_suspend() and drm_atomic_helper_resume()"), but unused
since commit ca8199f13498 ("drm/msm/dpu: ensure device suspend happens
during PM sleep") which switched to drm_mode_config_helper_suspend()/
drm_mode_config_helper_resume()..
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/607746/
|
|
The msm_atomic_state_clear() and msm_atomic_state_free() functions are
declared but never defined. Remove their prototypes.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Patchwork: https://patchwork.freedesktop.org/patch/610618/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Use kvmemdup instead of kvmalloc() + memcpy() to simplify the code.
No functional change intended.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/609596/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Cross-driver (xe-core) Changes:
- Require BMG scanout buffers to be 64k physically aligned (Maarten)
Core (drm) Changes:
- Introducing Xe2 ccs modifiers for integrated and discrete graphics (Juha-Pekka)
Driver Changes:
- General cleanup and more work moving towards intel_display isolation (Jani)
- New display workaround (Suraj)
- Use correct cp_irq_count on HDCP (Suraj)
- eDP PSR fix when CRC is enabled (Jouni)
- Fix DP MST state after a sink reset (Imre)
- Fix Arrow Lake GSC firmware version (John)
- Use chained DSBs for LUT programming (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZtCC0lJ0Zf3MoSdW@intel.com
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- Fix OA format masks which were breaking build with gcc-5
Cross-subsystem Changes:
Driver Changes:
- Use dma_fence_chain_free in chain fence unused as a sync (Matthew Brost)
- Refactor hw engine lookup and mmio access to be used in more places
(Dominik, Matt Auld, Mika Kuoppala)
- Enable priority mem read for Xe2 and later (Pallavi Mishra)
- Fix PL1 disable flow in xe_hwmon_power_max_write (Karthik)
- Fix refcount and speedup devcoredump (Matthew Brost)
- Add performance tuning changes to Xe2 (Akshata, Shekhar)
- Fix OA sysfs entry (Ashutosh)
- Add first GuC firmware support for BMG (Julia)
- Bump minimum GuC firmware for platforms under force_probe to match LNL
and BMG (Julia)
- Fix access check on user fence creation (Nirmoy)
- Add/document workarounds for Xe2 (Julia, Daniele, John, Tejas)
- Document workaround and use proper WA infra (Matt Roper)
- Fix VF configuration on media GT (Michal Wajdeczko)
- Fix VM dma-resv lock (Matthew Brost)
- Allow suspend/resume exec queue backend op to be called multiple times
(Matthew Brost)
- Add GT stats to debugfs (Nirmoy)
- Add hwconfig to debugfs (Matt Roper)
- Compile out all debugfs code with ONFIG_DEUBG_FS=n (Lucas)
- Remove dead kunit code (Jani Nikula)
- Refactor drvdata storing to help display (Jani Nikula)
- Cleanup unsused xe parameter in pte handling (Himal)
- Rename s/enable_display/probe_display/ for clarity (Lucas)
- Fix missing MCR annotation in couple of registers (Tejas)
- Fix DGFX display suspend/resume (Maarten)
- Prepare exec_queue_kill for PXP handling (Daniele)
- Fix devm/drmm issues (Daniele, Matthew Brost)
- Fix tile and ggtt fini sequences (Matthew Brost)
- Fix crashes when probing without firmware in place (Daniele, Matthew Brost)
- Use xe_managed for kernel BOs (Daniele, Matthew Brost)
- Future-proof dss_per_group calculation by using hwconfig (Matt Roper)
- Use reserved copy engine for user binds on faulting devices
(Matthew Brost)
- Allow mixing dma-fence jobs and long-running faulting jobs (Francois)
- Cleanup redundant arg when creating use BO (Nirmoy)
- Prevent UAF around preempt fence (Auld)
- Fix display suspend/resume (Maarten)
- Use vma_pages() helper (Thorsten)
- Calculate pagefault queue size (Stuart, Matthew Auld)
- Fix missing pagefault wq destroy (Stuart)
- Fix lifetime handling of HW fence ctx (Matthew Brost)
- Fix order destroy order for jobs (Matthew Brost)
- Fix TLB invalidation for media GT (Matthew Brost)
- Document GGTT (Rodrigo Vivi)
- Refactor GGTT layering and fix runtime outer protection (Rodrigo Vivi)
- Handle HPD polling on display pm runtime suspend/resume (Imre, Vinod)
- Drop unrequired NULL checks (Apoorva, Himal)
- Use separate rpm lockdep map for non-d3cold-capable devices (Thomas Hellström)
- Support "nomodeset" kernel command-line option (Thomas Zimmermann)
- Drop force_probe requirement for LNL and BMG (Lucas, Balasubramani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/wd42jsh4i3q5zlrmi2cljejohdsrqc6hvtxf76lbxsp3ibrgmz@y54fa7wwxgsd
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.12:
UAPI Changes:
devfs:
- support device numbers up to MINORBITS limit
Core Changes:
ci:
- increase job timeout
devfs:
- use XArray for minor ids
displayport:
- mst: GUID improvements
docs:
- add fixes and cleanups
panic:
- optionally display QR code
Driver Changes:
amdgpu:
- faster vblank disabling
- GUID improvements
gm12u320
- convert to struct drm_edid
host1x:
- fix syncpoint IRQ during resume
- use iommu_paging_domain_alloc()
imx:
- ipuv3: convert to struct drm_edid
omapdrm:
- improve error handling
panel:
- add support for BOE TV101WUM-LL2 plus DT bindings
- novatek-nt35950: improve error handling
- nv3051d: improve error handling
- panel-edp: add support for BOE NE140WUM-N6G; revert support for
SDC ATNA45AF01
- visionox-vtdr6130: improve error handling; use
devm_regulator_bulk_get_const()
renesas:
- rz-du: add support for RZ/G2UL plus DT bindings
sti:
- convert to struct drm_edid
tegra:
- gr3d: improve PM domain handling
- convert to struct drm_edid
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829144654.GA145538@linux.fritz.box
|
|
In order to better handle the necessary DSB DEwake tricks let's
switch over to using a chained DSB for the actual LUT programming.
The CPU will start 'dsb_color_commit', which in turn will start the
chained 'dsb_color_vblank'.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-15-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
|
|
We'll soon utilize several DSBs during the commit. To that end
rename the current crtc_state->dsb to crtc_state->dsb_color_vblank
to better reflect its role (color managemnent stuff programmed during
vblank).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-14-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
|
|
In order to avoid the DSB keeping the DEwake permanently
asserted we must clear DSB_PMCTRL_2.DSB_FORCE_DEWAKE once
we are done. For good measure do the same for
DSB_PMCTRL.DSB_ENABLE_DEWAKE.
Experimentally this doens't seem to be actually necessary
(unlike with DSB_FORCE_DEWAKE). That is, the DSB_ENABLE_DEWAKE
doesn't seem to do anything whenever the DSB is not active.
But I'd hate to waste a ton of power in case there I'm wrong
and there is some way DEwake could remaing asserted. One extra
register write is a small price to pay for some peace of mind.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-13-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
|
|
Allow intel_dsb_chain() to start the chained DSB
at start of the undelaye vblank. This is slightly
more involved than simply setting the bit as we
must use the DEwake mechanism to eliminate pkgC
latency.
And DSB_ENABLE_DEWAKE itself is problematic in that
it allows us to configure just a single scanline,
and if the current scanline is already past that
DSB_ENABLE_DEWAKE won't do anything, rendering the
whole thing moot.
The current workaround involves checking the pipe's current
scanline with the CPU, and if it looks like we're about to
miss the configured DEwake scanline we set DSB_FORCE_DEWAKE
to immediately assert DEwake. This is somewhat racy since the
hardware is making progress all the while we're checking it on
the CPU.
We can make things less racy by chaining two DSBs and handling
the DSB_FORCE_DEWAKE stuff entirely without CPU involvement:
1. CPU starts the first DSB immediately
2. First DSB configures the second DSB, including its dewake_scanline
3. First DSB starts the second w/ DSB_WAIT_FOR_VBLANK
4. First DSB asserts DSB_FORCE_DEWAKE
5. First DSB waits until we're outside the dewake_scanline-vblank_start
window
6. First DSB deasserts DSB_FORCE_DEWAKE
That will guarantee that the we are fully awake when the second
DSB starts to actually execute.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-12-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
|
|
In order to handle the DEwake tricks without involving
the CPU we need a mechanism by which one DSB can start
another one. Add a basic function to do so. We'll extend
it later with additional code to actually deal with
DEwake.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-11-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
|
|
Add functions to emit a DSB scanline window wait instructions.
We can either wait for the scanline to be IN the window
or OUT of the window.
The hardware doesn't handle wraparound so we must manually
deal with it by swapping the IN range to the inverse OUT
range, or vice versa.
Also add a bit of paranoia to catch the edge case of waiting
for the entire frame. That doesn't make sense since an IN
wait would be a nop, and an OUT wait would imply waiting
forever. Most of the time this also results in both scanline
ranges (original and inverted) to have lower=upper+1
which is nonsense from the hw POV.
For now we are only handling the case where the scanline wait
happens prior to latching the double buffered registers during
the commit (which might change the timings due to LRR/VRR/etc.)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-10-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
|
|
Adjust the code that determines the correct DSB_CHICKEN value
to be usable for use within DSB commands themselves. Ie.
precompute it based on our knowledge of what the hardware state
(VRR vs. not mainly) will be at the time of the commit.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-9-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
|
|
When determining various scanlines for DSB use we should take into
account whether VRR is active at the time when the DSB uses said
scanline information. For now all DSB scanline usage occurs prior
to the actual commit, so we only need to care about the state of
VRR at that time.
I've decided to move intel_crtc_scanline_to_hw() in its entirety
to the DSB code as it will also need to know the actual state
of VRR in order to do its job 100% correctly.
TODO: figure out how much of this could be moved to some
more generic place and perhaps be shared with the CPU
vblank evasion code/etc...
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-8-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
|
|
Currently we calculate the DEwake scanline based on
the delayed vblank start, while in reality it should be computed
based on the undelayed vblank start (as that is where the DSB
actually starts). Currently it doesn't really matter as we
don't have any vblank delay configured, but that may change
in the future so let's be accurate in what we do.
We can also remove the max() as intel_crtc_scanline_to_hw()
can deal with negative numbers, which there really shouldn't
be anyway.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-7-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
|
|
Relocate intel_dsb_dewake_scanline() and dsb_chicken() upwards
in the file. I need to reuse these while emitting DSB
commands, and I'd like to keep the DSB command emission
stuff more or less grouped together in the file.
Also drop the intel_ prefix from intel_dsb_dewake_scanline() since
it's all internal stuff and thus doesn't need so much namespacing.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-6-ville.syrjala@linux.intel.com
Reviewed-by: Animesh manna <animesh.manna@intel.com>
|
|
Currently we switch from out software idea of a scanline
to the hw's idea of a scanline during the commit phase in
_intel_dsb_commit(). While that is slightly easier due to
fastsets fiddling with the timings, we'll also need to
generate proper hw scanline numbers already when emitting
DSB scanline wait instructions. So this approach won't
do in the future. Switch to hw scanline numbers earlier.
Also intel_dsb_dewake_scanline() itself already makes
some assumptions about VRR that don't take into account
VRR toggling during fastsets, so technically delaying
the sw->hw conversion doesn't even help us.
The other reason for delaying the conversion was that we
are using intel_get_crtc_scanline() during intel_dsb_commit()
which gives us the current sw scanline. But this is pretty
low level stuff anyway so just using raw PIPEDSL reads seems
fine here, and that of course gives us the hw scanline
directly, reducing the need to do so many conversions.
v2: Return the non-hw scanline from intel_dsb_dewake_scanline()
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-5-ville.syrjala@linux.intel.com
|
|
Enable all DSB error/fault interrupts so that we can see if
anything goes terribly wrong.
v2: Pass intel_display to DISPLAY_VER() (Jani)
Drop extra '/' from drm_err() for consistency
v3: Reorder the irq handler a bit
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240625135852.13431-1-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
|
|
Prefer the struct drm_edid based functions for allocating the EDID and
updating the connector.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/c31c3afa883a3321345608c480c26161b638a83e.1724348429.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Prefer the struct drm_edid based functions for storing the EDID and
updating the connector.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/a1698044d556072e79041d69b8702099fd17bd90.1724348429.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Prefer the struct drm_edid based functions for reading the EDID and
updating the connector.
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/e764b50f4ad2de95e449ccb37f49c3f37b3333fc.1724348429.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Prefer the struct drm_edid based functions for reading the EDID and
updating the connector.
The functional change is that the CEC physical address gets invalidated
when the EDID could not be read.
v2: Use drm_edid_read() instead of drm_edid_read_ddc() (Sima)
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/25879a0183e30792bf0d63bdf56a03f11018e4a3.1724348429.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
On ilk/snb the pipe may be configured to place the LUT before or
after the CSC depending on various factors, but as there is only
one LUT (no split mode like on IVB+) we only advertise a gamma_lut
and no degamma_lut in the uapi to avoid confusing userspace.
This can cause a problem during readout if the VBIOS/GOP enabled
the LUT in the pre CSC configuration. The current code blindly
assigns the results of the readout to the degamma_lut, which will
cause a failure during the next atomic_check() as we aren't expecting
anything to be in degamma_lut since it's not visible to userspace.
Fix the problem by assigning whatever LUT we read out from the
hardware into gamma_lut.
Cc: stable@vger.kernel.org
Fixes: d2559299d339 ("drm/i915: Make ilk_read_luts() capable of degamma readout")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11608
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240710124137.16773-1-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
|
|
Replace deprecated 'mipi_dsi_dcs_write_seq()' macro
to 'mipi_dsi_dcs_write_seq_multi' macro in
panel_nv3051d_init_sequence function.
Signed-off-by: Abhishek Tamboli <abhishektamboli9@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240827152504.30586-1-abhishektamboli9@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240827152504.30586-1-abhishektamboli9@gmail.com
|
|
Changes the novatek-nt35950 panel to use multi style functions for
improved error handling.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240828182210.565861-1-tejasvipin76@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828182210.565861-1-tejasvipin76@gmail.com
|
|
Switch to devm_regulator_bulk_get_const() to stop setting the supplies
list in probe(), and move the regulator_bulk_data struct in static const.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240828-topic-sm8x50-upstream-vtdr6130-multi-v1-2-0cae20d4c55d@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828-topic-sm8x50-upstream-vtdr6130-multi-v1-2-0cae20d4c55d@linaro.org
|
|
Make usage of the new _multi() mipi_dsi functions instead of the
deprecated macros, improving error handling and printing.
bloat-o-meter gives a 12% gain on arm64:
Function old new delta
visionox_vtdr6130_unprepare 208 204 -4
visionox_vtdr6130_prepare 1192 896 -296
Total: Before=2348, After=2048, chg -12.78%
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240828-topic-sm8x50-upstream-vtdr6130-multi-v1-1-0cae20d4c55d@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828-topic-sm8x50-upstream-vtdr6130-multi-v1-1-0cae20d4c55d@linaro.org
|
|
Instead of just smashing jiffies into a GUID, use guid_gen() to generate
RFC 4122 compliant GUIDs.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240812122312.1567046-3-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Instead of just smashing jiffies into a GUID, use guid_gen() to generate
RFC 4122 compliant GUIDs.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240812122312.1567046-2-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The kernel has a guid_t type for GUIDs. Switch to using it, but avoid
any functional changes here.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240812122312.1567046-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Battlemage platform is sufficiently tested and found stable. CI is also
pretty stable. Remove the force_probe requirement to enable the platform
support by default.
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828082152.3194814-1-balasubramani.vivekanandan@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Make sure that ggtt_node_remove() is invoked only if both node and ggtt
are not null. Move the null checks to the caller function
xe_ggtt_node_remove().
v2: Move null check below declarations (Tejas)
Fixes: 919bb54e989c ("drm/xe: Fix missing runtime outer protection for ggtt_remove_node")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828092229.3606503-1-himal.prasad.ghimiray@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The function parameter out can be used directly instead of assigning it
to a temporary u64 variable first.
Remove the local variable tmp2 and use the parameter out directly as the
divisor in do_div() to remove the following Coccinelle/coccicheck
warning reported by do_div.cocci:
WARNING: do_div() does a 64-by-32 division, please consider using div64_u64 instead
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240710210034.796032-2-thorsten.blum@toblux.com
|
|
Rather than hooking up the PM domains through devm_pm_opp_attach_genpd()
and manage the device-link, let's avoid the boilerplate-code by converting
into dev_pm_domain_attach|detach_list.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240723144610.564273-2-ulf.hansson@linaro.org
|
|
An iommu domain is allocated in host1x_iommu_attach() and is attached to
host->dev. Use iommu_paging_domain_alloc() to make it explicit.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240610085555.88197-8-baolu.lu@linux.intel.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240812071605.9513-1-baolu.lu@linux.intel.com
|
