summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-08-10powerpc/numa: Consider the max NUMA node for migratable LPARLaurent Dufour
When a LPAR is migratable, we should consider the maximum possible NUMA node instead of the number of NUMA nodes from the actual system. The DT property 'ibm,current-associativity-domains' defines the maximum number of nodes the LPAR can see when running on that box. But if the LPAR is being migrated on another box, it may see up to the nodes defined by 'ibm,max-associativity-domains'. So if a LPAR is migratable, that value should be used. Unfortunately, there is no easy way to know if an LPAR is migratable or not. The hypervisor exports the property 'ibm,migratable-partition' in the case it set to migrate partition, but that would not mean that the current partition is migratable. Without this patch, when a LPAR is started on a 2 node box and then migrated to a 3 node box, the hypervisor may spread the LPAR's CPUs on the 3rd node. In that case if a CPU from that 3rd node is added to the LPAR, it will be wrongly assigned to the node because the kernel has been set to use up to 2 nodes (the configuration of the departure node). With this patch applies, the CPU is correctly added to the 3rd node. Fixes: f9f130ff2ec9 ("powerpc/numa: Detect support for coregroup") Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210511073136.17795-1-ldufour@linux.ibm.com
2021-08-10powerpc/non-smp: Unconditionaly call smp_mb() on switch_mmChristophe Leroy
Commit 3ccfebedd8cf ("powerpc, membarrier: Skip memory barrier in switch_mm()") added some logic to skip the smp_mb() in switch_mm_irqs_off() before the call to switch_mmu_context(). However, on non SMP smp_mb() is just a compiler barrier and doing it unconditionaly is simpler than the logic used to check whether the barrier is needed or not. After the patch: 00000000 <switch_mm_irqs_off>: ... c: 7c 04 18 40 cmplw r4,r3 10: 81 24 00 24 lwz r9,36(r4) 14: 91 25 04 c8 stw r9,1224(r5) 18: 4d 82 00 20 beqlr 1c: 48 00 00 00 b 1c <switch_mm_irqs_off+0x1c> 1c: R_PPC_REL24 switch_mmu_context Before the patch: 00000000 <switch_mm_irqs_off>: ... c: 7c 04 18 40 cmplw r4,r3 10: 81 24 00 24 lwz r9,36(r4) 14: 91 25 04 c8 stw r9,1224(r5) 18: 4d 82 00 20 beqlr 1c: 81 24 00 28 lwz r9,40(r4) 20: 71 29 00 0a andi. r9,r9,10 24: 40 82 00 34 bne 58 <switch_mm_irqs_off+0x58> 28: 48 00 00 00 b 28 <switch_mm_irqs_off+0x28> 28: R_PPC_REL24 switch_mmu_context ... 58: 2c 03 00 00 cmpwi r3,0 5c: 41 82 ff cc beq 28 <switch_mm_irqs_off+0x28> 60: 48 00 00 00 b 60 <switch_mm_irqs_off+0x60> 60: R_PPC_REL24 switch_mmu_context Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/e9d501da0c59f60ca767b1b3ea4603fce6d02b9e.1625486440.git.christophe.leroy@csgroup.eu
2021-08-10powerpc: Remove in_kernel_text()Christophe Leroy
Last user of in_kernel_text() stopped using in with commit 549e8152de80 ("powerpc: Make the 64-bit kernel as a position-independent executable"). Generic function is_kernel_text() does the same. So remote it. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/2a3a5b6f8cc0ef4e854d7b764f66aa8d2ee270d2.1624813698.git.christophe.leroy@csgroup.eu
2021-08-09powerpc/kprobes: Fix kprobe Oops happens in bookePu Lehui
When using kprobe on powerpc booke series processor, Oops happens as show bellow: / # echo "p:myprobe do_nanosleep" > /sys/kernel/debug/tracing/kprobe_events / # echo 1 > /sys/kernel/debug/tracing/events/kprobes/myprobe/enable / # sleep 1 [ 50.076730] Oops: Exception in kernel mode, sig: 5 [#1] [ 50.077017] BE PAGE_SIZE=4K SMP NR_CPUS=24 QEMU e500 [ 50.077221] Modules linked in: [ 50.077462] CPU: 0 PID: 77 Comm: sleep Not tainted 5.14.0-rc4-00022-g251a1524293d #21 [ 50.077887] NIP: c0b9c4e0 LR: c00ebecc CTR: 00000000 [ 50.078067] REGS: c3883de0 TRAP: 0700 Not tainted (5.14.0-rc4-00022-g251a1524293d) [ 50.078349] MSR: 00029000 <CE,EE,ME> CR: 24000228 XER: 20000000 [ 50.078675] [ 50.078675] GPR00: c00ebdf0 c3883e90 c313e300 c3883ea0 00000001 00000000 c3883ecc 00000001 [ 50.078675] GPR08: c100598c c00ea250 00000004 00000000 24000222 102490c2 bff4180c 101e60d4 [ 50.078675] GPR16: 00000000 102454ac 00000040 10240000 10241100 102410f8 10240000 00500000 [ 50.078675] GPR24: 00000002 00000000 c3883ea0 00000001 00000000 0000c350 3b9b8d50 00000000 [ 50.080151] NIP [c0b9c4e0] do_nanosleep+0x0/0x190 [ 50.080352] LR [c00ebecc] hrtimer_nanosleep+0x14c/0x1e0 [ 50.080638] Call Trace: [ 50.080801] [c3883e90] [c00ebdf0] hrtimer_nanosleep+0x70/0x1e0 (unreliable) [ 50.081110] [c3883f00] [c00ec004] sys_nanosleep_time32+0xa4/0x110 [ 50.081336] [c3883f40] [c001509c] ret_from_syscall+0x0/0x28 [ 50.081541] --- interrupt: c00 at 0x100a4d08 [ 50.081749] NIP: 100a4d08 LR: 101b5234 CTR: 00000003 [ 50.081931] REGS: c3883f50 TRAP: 0c00 Not tainted (5.14.0-rc4-00022-g251a1524293d) [ 50.082183] MSR: 0002f902 <CE,EE,PR,FP,ME> CR: 24000222 XER: 00000000 [ 50.082457] [ 50.082457] GPR00: 000000a2 bf980040 1024b4d0 bf980084 bf980084 64000000 00555345 fefefeff [ 50.082457] GPR08: 7f7f7f7f 101e0000 00000069 00000003 28000422 102490c2 bff4180c 101e60d4 [ 50.082457] GPR16: 00000000 102454ac 00000040 10240000 10241100 102410f8 10240000 00500000 [ 50.082457] GPR24: 00000002 bf9803f4 10240000 00000000 00000000 100039e0 00000000 102444e8 [ 50.083789] NIP [100a4d08] 0x100a4d08 [ 50.083917] LR [101b5234] 0x101b5234 [ 50.084042] --- interrupt: c00 [ 50.084238] Instruction dump: [ 50.084483] 4bfffc40 60000000 60000000 60000000 9421fff0 39400402 914200c0 38210010 [ 50.084841] 4bfffc20 00000000 00000000 00000000 <7fe00008> 7c0802a6 7c892378 93c10048 [ 50.085487] ---[ end trace f6fffe98e2fa8f3e ]--- [ 50.085678] Trace/breakpoint trap There is no real mode for booke arch and the MMU translation is always on. The corresponding MSR_IS/MSR_DS bit in booke is used to switch the address space, but not for real mode judgment. Fixes: 21f8b2fa3ca5 ("powerpc/kprobes: Ignore traps that happened in real mode") Signed-off-by: Pu Lehui <pulehui@huawei.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210809023658.218915-1-pulehui@huawei.com
2021-08-07powerpc/pseries: Fix update of LPAR security flavor after LPMLaurent Dufour
After LPM, when migrating from a system with security mitigation enabled to a system with mitigation disabled, the security flavor exposed in /proc is not correctly set back to 0. Do not assume the value of the security flavor is set to 0 when entering init_cpu_char_feature_flags(), so when called after a LPM, the value is set correctly even if the mitigation are not turned off. Fixes: 6ce56e1ac380 ("powerpc/pseries: export LPAR security flavor in lparcfg") Cc: stable@vger.kernel.org # v5.13+ Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210805152308.33988-1-ldufour@linux.ibm.com
2021-08-07powerpc/smp: Fix OOPS in topology_init()Christophe Leroy
Running an SMP kernel on an UP platform not prepared for it, I encountered the following OOPS: BUG: Kernel NULL pointer dereference on read at 0x00000034 Faulting instruction address: 0xc0a04110 Oops: Kernel access of bad area, sig: 11 [#1] BE PAGE_SIZE=4K SMP NR_CPUS=2 CMPCPRO Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-pmac-00001-g230fedfaad21 #5234 NIP: c0a04110 LR: c0a040d8 CTR: c0a04084 REGS: e100dda0 TRAP: 0300 Not tainted (5.13.0-pmac-00001-g230fedfaad21) MSR: 00009032 <EE,ME,IR,DR,RI> CR: 84000284 XER: 00000000 DAR: 00000034 DSISR: 20000000 GPR00: c0006bd4 e100de60 c1033320 00000000 00000000 c0942274 00000000 00000000 GPR08: 00000000 00000000 00000001 00000063 00000007 00000000 c0006f30 00000000 GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000005 GPR24: c0c67d74 c0c67f1c c0c60000 c0c67d70 c0c0c558 1efdf000 c0c00020 00000000 NIP [c0a04110] topology_init+0x8c/0x138 LR [c0a040d8] topology_init+0x54/0x138 Call Trace: [e100de60] [80808080] 0x80808080 (unreliable) [e100de90] [c0006bd4] do_one_initcall+0x48/0x1bc [e100def0] [c0a0150c] kernel_init_freeable+0x1c8/0x278 [e100df20] [c0006f44] kernel_init+0x14/0x10c [e100df30] [c00190fc] ret_from_kernel_thread+0x14/0x1c Instruction dump: 7c692e70 7d290194 7c035040 7c7f1b78 5529103a 546706fe 5468103a 39400001 7c641b78 40800054 80c690b4 7fb9402e <81060034> 7fbeea14 2c080000 7fa3eb78 ---[ end trace b246ffbc6bbbb6fb ]--- Fix it by checking smp_ops before using it, as already done in several other places in the arch/powerpc/kernel/smp.c Fixes: 39f87561454d ("powerpc/smp: Move ppc_md.cpu_die() to smp_ops.cpu_offline_self()") Cc: stable@vger.kernel.org Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/75287841cbb8740edd44880fe60be66d489160d9.1628097995.git.christophe.leroy@csgroup.eu
2021-08-07powerpc/32: Fix critical and debug interrupts on BOOKEChristophe Leroy
32 bits BOOKE have special interrupts for debug and other critical events. When handling those interrupts, dedicated registers are saved in the stack frame in addition to the standard registers, leading to a shift of the pt_regs struct. Since commit db297c3b07af ("powerpc/32: Don't save thread.regs on interrupt entry"), the pt_regs struct is expected to be at the same place all the time. Instead of handling a special struct in addition to pt_regs, just add those special registers to struct pt_regs. Fixes: db297c3b07af ("powerpc/32: Don't save thread.regs on interrupt entry") Cc: stable@vger.kernel.org Reported-by: Radu Rendec <radu.rendec@gmail.com> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/028d5483b4851b01ea4334d0751e7f260419092b.1625637264.git.christophe.leroy@csgroup.eu
2021-08-07powerpc/32s: Fix napping restore in data storage interrupt (DSI)Christophe Leroy
When a DSI (Data Storage Interrupt) is taken while in NAP mode, r11 doesn't survive the call to power_save_ppc32_restore(). So use r1 instead of r11 as they both contain the virtual stack pointer at that point. Fixes: 4c0104a83fc3 ("powerpc/32: Dismantle EXC_XFER_STD/LITE/TEMPLATE") Cc: stable@vger.kernel.org # v5.13+ Reported-by: Finn Thain <fthain@linux-m68k.org> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/731694e0885271f6ee9ffc179eb4bcee78313682.1628003562.git.christophe.leroy@csgroup.eu
2021-08-04powerpc/64s/perf: Always use SIAR for kernel interruptsNicholas Piggin
If an interrupt is taken in kernel mode, always use SIAR for it rather than looking at regs_sipr. This prevents samples piling up around interrupt enable (hard enable or interrupt replay via soft enable) in PMUs / modes where the PR sample indication is not in synch with SIAR. This results in better sampling of interrupt entry and exit in particular. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210720141504.420110-1-npiggin@gmail.com
2021-08-04powerpc/smp: Use existing L2 cache_map cpumask to find L3 cache siblingsParth Shah
On POWER10 systems, the "ibm,thread-groups" property "2" indicates the cpus in thread-group share both L2 and L3 caches. Hence, use cache_property = 2 itself to find both the L2 and L3 cache siblings. Hence, create a new thread_group_l3_cache_map to keep list of L3 siblings, but fill the mask using same property "2" array. Signed-off-by: Parth Shah <parth@linux.ibm.com> Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210728175607.591679-4-parth@linux.ibm.com
2021-08-04powerpc/cacheinfo: Remove the redundant get_shared_cpu_map()Gautham R. Shenoy
The helper function get_shared_cpu_map() was added in 'commit 500fe5f550ec ("powerpc/cacheinfo: Report the correct shared_cpu_map on big-cores")' and subsequently expanded upon in 'commit 0be47634db0b ("powerpc/cacheinfo: Print correct cache-sibling map/list for L2 cache")' in order to help report the correct groups of threads sharing these caches on big-core systems where groups of threads within a core can share different sets of caches. Now that powerpc/cacheinfo is aware of "ibm,thread-groups" property, cache->shared_cpu_map contains the correct set of thread-siblings sharing the cache. Hence we no longer need the functions get_shared_cpu_map(). This patch removes this function. We also remove the helper function index_dir_to_cpu() which was only called by get_shared_cpu_map(). With these functions removed, we can still see the correct cache-sibling map/list for L1 and L2 caches on systems with L1 and L2 caches distributed among groups of threads in a core. With this patch, on a SMT8 POWER10 system where the L1 and L2 caches are split between the two groups of threads in a core, for CPUs 8,9, the L1-Data, L1-Instruction, L2, L3 cache CPU sibling list is as follows: $ grep . /sys/devices/system/cpu/cpu[89]/cache/index[0123]/shared_cpu_list /sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list:8,10,12,14 /sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list:8,10,12,14 /sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list:8,10,12,14 /sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list:8-15 /sys/devices/system/cpu/cpu9/cache/index0/shared_cpu_list:9,11,13,15 /sys/devices/system/cpu/cpu9/cache/index1/shared_cpu_list:9,11,13,15 /sys/devices/system/cpu/cpu9/cache/index2/shared_cpu_list:9,11,13,15 /sys/devices/system/cpu/cpu9/cache/index3/shared_cpu_list:8-15 $ ppc64_cpu --smt=4 $ grep . /sys/devices/system/cpu/cpu[89]/cache/index[0123]/shared_cpu_list /sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list:8,10 /sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list:8,10 /sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list:8,10 /sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list:8-11 /sys/devices/system/cpu/cpu9/cache/index0/shared_cpu_list:9,11 /sys/devices/system/cpu/cpu9/cache/index1/shared_cpu_list:9,11 /sys/devices/system/cpu/cpu9/cache/index2/shared_cpu_list:9,11 /sys/devices/system/cpu/cpu9/cache/index3/shared_cpu_list:8-11 $ ppc64_cpu --smt=2 $ grep . /sys/devices/system/cpu/cpu[89]/cache/index[0123]/shared_cpu_list /sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list:8 /sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list:8 /sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list:8 /sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list:8-9 /sys/devices/system/cpu/cpu9/cache/index0/shared_cpu_list:9 /sys/devices/system/cpu/cpu9/cache/index1/shared_cpu_list:9 /sys/devices/system/cpu/cpu9/cache/index2/shared_cpu_list:9 /sys/devices/system/cpu/cpu9/cache/index3/shared_cpu_list:8-9 $ ppc64_cpu --smt=1 $ grep . /sys/devices/system/cpu/cpu[89]/cache/index[0123]/shared_cpu_list /sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list:8 /sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list:8 /sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list:8 /sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list:8 Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210728175607.591679-3-parth@linux.ibm.com
2021-08-04powerpc/cacheinfo: Lookup cache by dt node and thread-group idGautham R. Shenoy
Currently the cacheinfo code on powerpc indexes the "cache" objects (modelling the L1/L2/L3 caches) where the key is device-tree node corresponding to that cache. On some of the POWER server platforms thread-groups within the core share different sets of caches (Eg: On SMT8 POWER9 systems, threads 0,2,4,6 of a core share L1 cache and threads 1,3,5,7 of the same core share another L1 cache). On such platforms, there is a single device-tree node corresponding to that cache and the cache-configuration within the threads of the core is indicated via "ibm,thread-groups" device-tree property. Since the current code is not aware of the "ibm,thread-groups" property, on the aforementoined systems, cacheinfo code still treats all the threads in the core to be sharing the cache because of the single device-tree node (In the earlier example, the cacheinfo code would says CPUs 0-7 share L1 cache). In this patch, we make the powerpc cacheinfo code aware of the "ibm,thread-groups" property. We indexe the "cache" objects by the key-pair (device-tree node, thread-group id). For any CPUX, for a given level of cache, the thread-group id is defined to be the first CPU in the "ibm,thread-groups" cache-group containing CPUX. For levels of cache which are not represented in "ibm,thread-groups" property, the thread-group id is -1. [parth: Remove "static" keyword for the definition of "thread_group_l1_cache_map" and "thread_group_l2_cache_map" to get rid of the compile error.] Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Parth Shah <parth@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210728175607.591679-2-parth@linux.ibm.com
2021-08-04powerpc: move the install rule to arch/powerpc/MakefileMasahiro Yamada
Currently, the install target in arch/powerpc/Makefile descends into arch/powerpc/boot/Makefile to invoke the shell script, but there is no good reason to do so. arch/powerpc/Makefile can run the shell script directly. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210729141937.445051-3-masahiroy@kernel.org
2021-08-04powerpc: make the install target not depend on any build artifactMasahiro Yamada
The install target should not depend on any build artifact. The reason is explained in commit 19514fc665ff ("arm, kbuild: make "make install" not depend on vmlinux"). Change the PowerPC installation code in a similar way. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210729141937.445051-2-masahiroy@kernel.org
2021-08-04powerpc: remove unused zInstall target from arch/powerpc/boot/MakefileMasahiro Yamada
Commit c913e5f95e54 ("powerpc/boot: Don't install zImage.* from make install") added the zInstall target to arch/powerpc/boot/Makefile, but you cannot use it since the corresponding hook is missing in arch/powerpc/Makefile. It has never worked since its addition. Nobody has complained about it for 7 years, which means this code was unneeded. With this removal, the install.sh will be passed in with 4 parameters. Simplify the shell script. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210729141937.445051-1-masahiroy@kernel.org
2021-08-04cpuidle: pseries: Mark pseries_idle_proble() as __initNathan Chancellor
After commit 7cbd631d4dec ("cpuidle: pseries: Fixup CEDE0 latency only for POWER10 onwards"), pseries_idle_probe() is no longer inlined when compiling with clang, which causes a modpost warning: WARNING: modpost: vmlinux.o(.text+0xc86a54): Section mismatch in reference from the function pseries_idle_probe() to the function .init.text:fixup_cede0_latency() The function pseries_idle_probe() references the function __init fixup_cede0_latency(). This is often because pseries_idle_probe lacks a __init annotation or the annotation of fixup_cede0_latency is wrong. pseries_idle_probe() is a non-init function, which calls fixup_cede0_latency(), which is an init function, explaining the mismatch. pseries_idle_probe() is only called from pseries_processor_idle_init(), which is an init function, so mark pseries_idle_probe() as __init so there is no more warning. Fixes: 054e44ba99ae ("cpuidle: pseries: Add function to parse extended CEDE records") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210803211547.1093820-1-nathan@kernel.org
2021-08-03powerpc/stacktrace: Include linux/delay.hMichal Suchanek
commit 7c6986ade69e ("powerpc/stacktrace: Fix spurious "stale" traces in raise_backtrace_ipi()") introduces udelay() call without including the linux/delay.h header. This may happen to work on master but the header that declares the functionshould be included nonetheless. Fixes: 7c6986ade69e ("powerpc/stacktrace: Fix spurious "stale" traces in raise_backtrace_ipi()") Signed-off-by: Michal Suchanek <msuchanek@suse.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210729180103.15578-1-msuchanek@suse.de
2021-08-03cpuidle: pseries: Do not cap the CEDE0 latency in fixup_cede0_latency()Gautham R. Shenoy
Currently in fixup_cede0_latency() code, we perform the fixup the CEDE(0) exit latency value only if minimum advertized extended CEDE latency values are less than 10us. This was done so as to not break the expected behaviour on POWER8 platforms where the advertised latency was higher than the default 10us, which would delay the SMT folding on the core. However, after the earlier patch "cpuidle/pseries: Fixup CEDE0 latency only for POWER10 onwards", we can be sure that the fixup of CEDE0 latency is going to happen only from POWER10 onwards. Hence unconditionally use the minimum exit latency provided by the platform. Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1626676399-15975-3-git-send-email-ego@linux.vnet.ibm.com
2021-08-03cpuidle: pseries: Fixup CEDE0 latency only for POWER10 onwardsGautham R. Shenoy
Commit d947fb4c965c ("cpuidle: pseries: Fixup exit latency for CEDE(0)") sets the exit latency of CEDE(0) based on the latency values of the Extended CEDE states advertised by the platform On POWER9 LPARs, the firmwares advertise a very low value of 2us for CEDE1 exit latency on a Dedicated LPAR. The latency advertized by the PHYP hypervisor corresponds to the latency required to wakeup from the underlying hardware idle state. However the wakeup latency from the LPAR perspective should include 1. The time taken to transition the CPU from the Hypervisor into the LPAR post wakeup from platform idle state 2. Time taken to send the IPI from the source CPU (waker) to the idle target CPU (wakee). 1. can be measured via timer idle test, where we queue a timer, say for 1ms, and enter the CEDE state. When the timer fires, in the timer handler we compute how much extra timer over the expected 1ms have we consumed. On a a POWER9 LPAR the numbers are CEDE latency measured using a timer (numbers in ns) N Min Median Avg 90%ile 99%ile Max Stddev 400 2601 5677 5668.74 5917 6413 9299 455.01 1. and 2. combined can be determined by an IPI latency test where we send an IPI to an idle CPU and in the handler compute the time difference between when the IPI was sent and when the handler ran. We see the following numbers on POWER9 LPAR. CEDE latency measured using an IPI (numbers in ns) N Min Median Avg 90%ile 99%ile Max Stddev 400 711 7564 7369.43 8559 9514 9698 1200.01 Suppose, we consider the 99th percentile latency value measured using the IPI to be the wakeup latency, the value would be 9.5us This is in the ballpark of the default value of 10us. Hence, use the exit latency of CEDE(0) based on the latency values advertized by platform only from POWER10 onwards. The values advertized on POWER10 platforms is more realistic and informed by the latency measurements. For earlier platforms stick to the default value of 10us. The fix was suggested by Michael Ellerman. Fixes: d947fb4c965c ("cpuidle: pseries: Fixup exit latency for CEDE(0)") Reported-by: Enrico Joedecke <joedecke@de.ibm.com> Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1626676399-15975-2-git-send-email-ego@linux.vnet.ibm.com
2021-07-29powerpc/vdso: Don't use r30 to avoid breaking Go langMichael Ellerman
The Go runtime uses r30 for some special value called 'g'. It assumes that value will remain unchanged even when calling VDSO functions. Although r30 is non-volatile across function calls, the callee is free to use it, as long as the callee saves the value and restores it before returning. It used to be true by accident that the VDSO didn't use r30, because the VDSO was hand-written asm. When we switched to building the VDSO from C the compiler started using r30, at least in some builds, leading to crashes in Go. eg: ~/go/src$ ./all.bash Building Go cmd/dist using /usr/lib/go-1.16. (go1.16.2 linux/ppc64le) Building Go toolchain1 using /usr/lib/go-1.16. go build os/exec: /usr/lib/go-1.16/pkg/tool/linux_ppc64le/compile: signal: segmentation fault go build reflect: /usr/lib/go-1.16/pkg/tool/linux_ppc64le/compile: signal: segmentation fault go tool dist: FAILED: /usr/lib/go-1.16/bin/go install -gcflags=-l -tags=math_big_pure_go compiler_bootstrap bootstrap/cmd/...: exit status 1 There are patches in flight to fix Go[1], but until they are released and widely deployed we can workaround it in the VDSO by avoiding use of r30. Note this only works with GCC, clang does not support -ffixed-rN. 1: https://go-review.googlesource.com/c/go/+/328110 Fixes: ab037dd87a2f ("powerpc/vdso: Switch VDSO to generic C implementation.") Cc: stable@vger.kernel.org # v5.11+ Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210729131244.2595519-1-mpe@ellerman.id.au
2021-07-29powerpc/pseries: Fix regression while building external modulesSrikar Dronamraju
With commit c9f3401313a5 ("powerpc: Always enable queued spinlocks for 64s, disable for others") CONFIG_PPC_QUEUED_SPINLOCKS is always enabled on ppc64le, external modules that use spinlock APIs are failing. ERROR: modpost: GPL-incompatible module XXX.ko uses GPL-only symbol 'shared_processor' Before the above commit, modules were able to build without any issues. Also this problem is not seen on other architectures. This problem can be workaround if CONFIG_UNINLINE_SPIN_UNLOCK is enabled in the config. However CONFIG_UNINLINE_SPIN_UNLOCK is not enabled by default and only enabled in certain conditions like CONFIG_DEBUG_SPINLOCKS is set in the kernel config. #include <linux/module.h> spinlock_t spLock; static int __init spinlock_test_init(void) { spin_lock_init(&spLock); spin_lock(&spLock); spin_unlock(&spLock); return 0; } static void __exit spinlock_test_exit(void) { printk("spinlock_test unloaded\n"); } module_init(spinlock_test_init); module_exit(spinlock_test_exit); MODULE_DESCRIPTION ("spinlock_test"); MODULE_LICENSE ("non-GPL"); MODULE_AUTHOR ("Srikar Dronamraju"); Given that spin locks are one of the basic facilities for module code, this effectively makes it impossible to build/load almost any non GPL modules on ppc64le. This was first reported at https://github.com/openzfs/zfs/issues/11172 Currently shared_processor is exported as GPL only symbol. Fix this for parity with other architectures by exposing shared_processor to non-GPL modules too. Fixes: 14c73bd344da ("powerpc/vcpu: Assume dedicated processors as non-preempt") Cc: stable@vger.kernel.org # v5.5+ Reported-by: marc.c.dionne@gmail.com Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210729060449.292780-1-srikar@linux.vnet.ibm.com
2021-07-26powerpc/kexec: blacklist functions called in real mode for kprobeHari Bathini
As kprobe does not handle events happening in real mode, blacklist the functions that only get called in real mode or in kexec sequence with MMU turned off. Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/162626687834.155313.4692863392927831843.stgit@hbathini-workstation.ibm.com
2021-07-26Merge branch 'fixes' into nextMichael Ellerman
Merge our fixes branch, which contains some fixes that didn't make it into rc2 but which we'd like in next.
2021-07-23KVM: PPC: Book3S HV Nested: Sanitise H_ENTER_NESTED TM stateNicholas Piggin
The H_ENTER_NESTED hypercall is handled by the L0, and it is a request by the L1 to switch the context of the vCPU over to that of its L2 guest, and return with an interrupt indication. The L1 is responsible for switching some registers to guest context, and the L0 switches others (including all the hypervisor privileged state). If the L2 MSR has TM active, then the L1 is responsible for recheckpointing the L2 TM state. Then the L1 exits to L0 via the H_ENTER_NESTED hcall, and the L0 saves the TM state as part of the exit, and then it recheckpoints the TM state as part of the nested entry and finally HRFIDs into the L2 with TM active MSR. Not efficient, but about the simplest approach for something that's horrendously complicated. Problems arise if the L1 exits to the L0 with a TM state which does not match the L2 TM state being requested. For example if the L1 is transactional but the L2 MSR is non-transactional, or vice versa. The L0's HRFID can take a TM Bad Thing interrupt and crash. Fix this by disallowing H_ENTER_NESTED in TM[T] state entirely, and then ensuring that if the L1 is suspended then the L2 must have TM active, and if the L1 is not suspended then the L2 must not have TM active. Fixes: 360cae313702 ("KVM: PPC: Book3S HV: Nested guest entry via hypercall") Cc: stable@vger.kernel.org # v4.20+ Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2021-07-23KVM: PPC: Book3S: Fix H_RTAS rets buffer overflowNicholas Piggin
The kvmppc_rtas_hcall() sets the host rtas_args.rets pointer based on the rtas_args.nargs that was provided by the guest. That guest nargs value is not range checked, so the guest can cause the host rets pointer to be pointed outside the args array. The individual rtas function handlers check the nargs and nrets values to ensure they are correct, but if they are not, the handlers store a -3 (0xfffffffd) failure indication in rets[0] which corrupts host memory. Fix this by testing up front whether the guest supplied nargs and nret would exceed the array size, and fail the hcall directly without storing a failure indication to rets[0]. Also expand on a comment about why we kill the guest and try not to return errors directly if we have a valid rets[0] pointer. Fixes: 8e591cb72047 ("KVM: PPC: Book3S: Add infrastructure to implement kernel-side RTAS calls") Cc: stable@vger.kernel.org # v3.10+ Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2021-07-18Linux 5.14-rc2v5.14-rc2Linus Torvalds
2021-07-18Merge tag 'perf-tools-fixes-for-v5.14-2021-07-18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Skip invalid hybrid PMU on hybrid systems when the atom (little) CPUs are offlined. - Fix 'perf test' problems related to the recently added hybrid (BIG/little) code. - Split ARM's coresight (hw tracing) decode by aux records to avoid fatal decoding errors. - Fix add event failure in 'perf probe' when running 32-bit perf in a 64-bit kernel. - Fix 'perf sched record' failure when CONFIG_SCHEDSTATS is not set. - Fix memory and refcount leaks detected by ASAn when running 'perf test', should be clean of warnings now. - Remove broken definition of __LITTLE_ENDIAN from tools' linux/kconfig.h, which was breaking the build in some systems. - Cast PTHREAD_STACK_MIN to int as it may turn into 'long sysconf(__SC_THREAD_STACK_MIN_VALUE), breaking the build in some systems. - Fix libperf build error with LIBPFM4=1. - Sync UAPI files changed by the memfd_secret new syscall. * tag 'perf-tools-fixes-for-v5.14-2021-07-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (35 commits) perf sched: Fix record failure when CONFIG_SCHEDSTATS is not set perf probe: Fix add event failure when running 32-bit perf in a 64-bit kernel perf data: Close all files in close_dir() perf probe-file: Delete namelist in del_events() on the error path perf test bpf: Free obj_buf perf trace: Free strings in trace__parse_events_option() perf trace: Free syscall tp fields in evsel->priv perf trace: Free syscall->arg_fmt perf trace: Free malloc'd trace fields on exit perf lzma: Close lzma stream on exit perf script: Fix memory 'threads' and 'cpus' leaks on exit perf script: Release zstd data perf session: Cleanup trace_event perf inject: Close inject.output on exit perf report: Free generated help strings for sort option perf env: Fix memory leak of cpu_pmu_caps perf test maps__merge_in: Fix memory leak of maps perf dso: Fix memory leak in dso__new_map() perf test event_update: Fix memory leak of unit perf test event_update: Fix memory leak of evlist ...
2021-07-18Merge tag 'xfs-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds
Pull xfs fixes from Darrick Wong: "A few fixes for issues in the new online shrink code, additional corrections for my recent bug-hunt w.r.t. extent size hints on realtime, and improved input checking of the GROWFSRT ioctl. IOW, the usual 'I somehow got bored during the merge window and resumed auditing the farther reaches of xfs': - Fix shrink eligibility checking when sparse inode clusters enabled - Reset '..' directory entries when unlinking directories to prevent verifier errors if fs is shrinked later - Don't report unusable extent size hints to FSGETXATTR - Don't warn when extent size hints are unusable because the sysadmin configured them that way - Fix insufficient parameter validation in GROWFSRT ioctl - Fix integer overflow when adding rt volumes to filesystem" * tag 'xfs-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: detect misaligned rtinherit directory extent size hints xfs: fix an integer overflow error in xfs_growfs_rt xfs: improve FSGROWFSRT precondition checking xfs: don't expose misaligned extszinherit hints to userspace xfs: correct the narrative around misaligned rtinherit/extszinherit dirs xfs: reset child dir '..' entry when unlinking child xfs: check for sparse inode clusters that cross new EOAG when shrinking
2021-07-18Merge tag 'iomap-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds
Pull iomap fixes from Darrick Wong: "A handful of bugfixes for the iomap code. There's nothing especially exciting here, just fixes for UBSAN (not KASAN as I erroneously wrote in the tag message) warnings about undefined behavior in the SEEK_DATA/SEEK_HOLE code, and some reshuffling of per-page block state info to fix some problems with gfs2. - Fix KASAN warnings due to integer overflow in SEEK_DATA/SEEK_HOLE - Fix assertion errors when using inlinedata files on gfs2" * tag 'iomap-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: iomap: Don't create iomap_page objects in iomap_page_mkwrite_actor iomap: Don't create iomap_page objects for inline files iomap: Permit pages without an iop to enter writeback iomap: remove the length variable in iomap_seek_hole iomap: remove the length variable in iomap_seek_data
2021-07-18Merge tag 'kbuild-fixes-v5.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Restore the original behavior of scripts/setlocalversion when LOCALVERSION is set to empty. - Show Kconfig prompts even for 'make -s' - Fix the combination of COFNIG_LTO_CLANG=y and CONFIG_MODVERSIONS=y for older GNU Make versions * tag 'kbuild-fixes-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: Documentation: Fix intiramfs script name Kbuild: lto: fix module versionings mismatch in GNU make 3.X kbuild: do not suppress Kconfig prompts for silent build scripts/setlocalversion: fix a bug when LOCALVERSION is empty
2021-07-18Documentation: Fix intiramfs script nameRobert Richter
Documentation was not changed when renaming the script in commit 80e715a06c2d ("initramfs: rename gen_initramfs_list.sh to gen_initramfs.sh"). Fixing this. Basically does: $ sed -i -e s/gen_initramfs_list.sh/gen_initramfs.sh/g $(git grep -l gen_initramfs_list.sh) Fixes: 80e715a06c2d ("initramfs: rename gen_initramfs_list.sh to gen_initramfs.sh") Signed-off-by: Robert Richter <rrichter@amd.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-07-18Kbuild: lto: fix module versionings mismatch in GNU make 3.XLecopzer Chen
When building modules(CONFIG_...=m), I found some of module versions are incorrect and set to 0. This can be found in build log for first clean build which shows WARNING: EXPORT symbol "XXXX" [drivers/XXX/XXX.ko] version generation failed, symbol will not be versioned. But in second build(incremental build), the WARNING disappeared and the module version becomes valid CRC and make someone who want to change modules without updating kernel image can't insert their modules. The problematic code is + $(foreach n, $(filter-out FORCE,$^), \ + $(if $(wildcard $(n).symversions), \ + ; cat $(n).symversions >> $@.symversions)) For example: rm -f fs/notify/built-in.a.symversions ; rm -f fs/notify/built-in.a; \ llvm-ar cDPrST fs/notify/built-in.a fs/notify/fsnotify.o \ fs/notify/notification.o fs/notify/group.o ... `foreach n` shows nothing to `cat` into $(n).symversions because `if $(wildcard $(n).symversions)` return nothing, but actually they do exist during this line was executed. -rw-r--r-- 1 root root 168580 Jun 13 19:10 fs/notify/fsnotify.o -rw-r--r-- 1 root root 111 Jun 13 19:10 fs/notify/fsnotify.o.symversions The reason is the $(n).symversions are generated at runtime, but Makefile wildcard function expends and checks the file exist or not during parsing the Makefile. Thus fix this by use `test` shell command to check the file existence in runtime. Rebase from both: 1. [https://lore.kernel.org/lkml/20210616080252.32046-1-lecopzer.chen@mediatek.com/] 2. [https://lore.kernel.org/lkml/20210702032943.7865-1-lecopzer.chen@mediatek.com/] Fixes: 38e891849003 ("kbuild: lto: fix module versioning") Co-developed-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-07-18kbuild: do not suppress Kconfig prompts for silent buildMasahiro Yamada
When a new CONFIG option is available, Kbuild shows a prompt to get the user input. $ make [ snip ] Core Scheduling for SMT (SCHED_CORE) [N/y/?] (NEW) This is the only interactive place in the build process. Commit 174a1dcc9642 ("kbuild: sink stdout from cmd for silent build") suppressed Kconfig prompts as well because syncconfig is invoked by the 'cmd' macro. You cannot notice the fact that Kconfig is waiting for the user input. Use 'kecho' to show the equivalent short log without suppressing stdout from sub-make. Fixes: 174a1dcc9642 ("kbuild: sink stdout from cmd for silent build") Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
2021-07-18scripts/setlocalversion: fix a bug when LOCALVERSION is emptyMikulas Patocka
The commit 042da426f8eb ("scripts/setlocalversion: simplify the short version part") reduces indentation. Unfortunately, it also changes behavior in a subtle way - if the user has empty "LOCALVERSION" variable, the plus sign is appended to the kernel version. It wasn't appended before. This patch reverts to the old behavior - we append the plus sign only if the LOCALVERSION variable is not set. Fixes: 042da426f8eb ("scripts/setlocalversion: simplify the short version part") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-07-18perf sched: Fix record failure when CONFIG_SCHEDSTATS is not setYang Jihong
The tracepoints trace_sched_stat_{wait, sleep, iowait} are not exposed to user if CONFIG_SCHEDSTATS is not set, "perf sched record" records the three events. As a result, the command fails. Before: #perf sched record sleep 1 event syntax error: 'sched:sched_stat_wait' \___ unknown tracepoint Error: File /sys/kernel/tracing/events/sched/sched_stat_wait not found. Hint: Perhaps this kernel misses some CONFIG_ setting to enable this feature?. Run 'perf list' for a list of valid events Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -e, --event <event> event selector. use 'perf list' to list available events Solution: Check whether schedstat tracepoints are exposed. If no, these events are not recorded. After: # perf sched record sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.163 MB perf.data (1091 samples) ] # perf sched report run measurement overhead: 4736 nsecs sleep measurement overhead: 9059979 nsecs the run test took 999854 nsecs the sleep test took 8945271 nsecs nr_run_events: 716 nr_sleep_events: 785 nr_wakeup_events: 0 ... ------------------------------------------------------------ Fixes: 2a09b5de235a6 ("sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is not set") Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Yafang Shao <laoar.shao@gmail.com> Link: http://lore.kernel.org/lkml/20210713112358.194693-1-yangjihong1@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-18perf probe: Fix add event failure when running 32-bit perf in a 64-bit kernelYang Jihong
The "address" member of "struct probe_trace_point" uses long data type. If kernel is 64-bit and perf program is 32-bit, size of "address" variable is 32 bits. As a result, upper 32 bits of address read from kernel are truncated, an error occurs during address comparison in kprobe_warn_out_range(). Before: # perf probe -a schedule schedule is out of .text, skip it. Error: Failed to add events. Solution: Change data type of "address" variable to u64 and change corresponding address printing and value assignment. After: # perf.new.new probe -a schedule Added new event: probe:schedule (on schedule) You can now use it in all perf tools, such as: perf record -e probe:schedule -aR sleep 1 # perf probe -l probe:schedule (on schedule@kernel/sched/core.c) # perf record -e probe:schedule -aR sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.156 MB perf.data (1366 samples) ] # perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 1K of event 'probe:schedule' # Event count (approx.): 1366 # # Overhead Command Shared Object Symbol # ........ ............... ................. ............ # 6.22% migration/0 [kernel.kallsyms] [k] schedule 6.22% migration/1 [kernel.kallsyms] [k] schedule 6.22% migration/2 [kernel.kallsyms] [k] schedule 6.22% migration/3 [kernel.kallsyms] [k] schedule 6.15% migration/10 [kernel.kallsyms] [k] schedule 6.15% migration/11 [kernel.kallsyms] [k] schedule 6.15% migration/12 [kernel.kallsyms] [k] schedule 6.15% migration/13 [kernel.kallsyms] [k] schedule 6.15% migration/14 [kernel.kallsyms] [k] schedule 6.15% migration/15 [kernel.kallsyms] [k] schedule 6.15% migration/4 [kernel.kallsyms] [k] schedule 6.15% migration/5 [kernel.kallsyms] [k] schedule 6.15% migration/6 [kernel.kallsyms] [k] schedule 6.15% migration/7 [kernel.kallsyms] [k] schedule 6.15% migration/8 [kernel.kallsyms] [k] schedule 6.15% migration/9 [kernel.kallsyms] [k] schedule 0.22% rcu_sched [kernel.kallsyms] [k] schedule ... # # (Cannot load tips.txt file, please install perf!) # Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jianlin Lv <jianlin.lv@arm.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Li Huafei <lihuafei1@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lore.kernel.org/lkml/20210715063723.11926-1-yangjihong1@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-18perf data: Close all files in close_dir()Riccardo Mancini
When using 'perf report' in directory mode, the first file is not closed on exit, causing a memory leak. The problem is caused by the iterating variable never reaching 0. Fixes: 145520631130bd64 ("perf data: Add perf_data__(create_dir|close_dir) functions") Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zhen Lei <thunder.leizhen@huawei.com> Link: http://lore.kernel.org/lkml/20210716141122.858082-1-rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-18perf probe-file: Delete namelist in del_events() on the error pathRiccardo Mancini
ASan reports some memory leaks when running: # perf test "42: BPF filter" This second leak is caused by a strlist not being dellocated on error inside probe_file__del_events. This patch adds a goto label before the deallocation and makes the error path jump to it. Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Fixes: e7895e422e4da63d ("perf probe: Split del_perf_probe_events()") Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/174963c587ae77fa108af794669998e4ae558338.1626343282.git.rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-17Merge tag 'soc-fixes-5.14-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Here are the patches for this week that came as the fallout of the merge window: - Two fixes for the NVidia memory controller driver - multiple defconfig files get patched to turn CONFIG_FB back on after that is no longer selected by CONFIG_DRM - ffa and scmpi firmware drivers fixes, mostly addressing compiler and documentation warnings - Platform specific fixes for device tree files on ASpeed, Renesas and NVidia SoC, mostly for recent regressions. - A workaround for a regression on the USB PHY with devlink when the usb-nop-xceiv driver is not available until the rootfs is mounted. - Device tree compiler warnings in Arm Versatile-AB" * tag 'soc-fixes-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (35 commits) ARM: dts: versatile: Fix up interrupt controller node names ARM: multi_v7_defconfig: Make NOP_USB_XCEIV driver built-in ARM: configs: Update u8500_defconfig ARM: configs: Update Vexpress defconfig ARM: configs: Update Versatile defconfig ARM: configs: Update RealView defconfig ARM: configs: Update Integrator defconfig arm: Typo s/PCI_IXP4XX_LEGACY/IXP4XX_PCI_LEGACY/ firmware: arm_scmi: Fix range check for the maximum number of pending messages firmware: arm_scmi: Avoid padding in sensor message structure firmware: arm_scmi: Fix kernel doc warnings about return values firmware: arm_scpi: Fix kernel doc warnings firmware: arm_scmi: Fix kernel doc warnings ARM: shmobile: defconfig: Restore graphical consoles firmware: arm_ffa: Fix a possible ffa_linux_errmap buffer overflow firmware: arm_ffa: Fix the comment style firmware: arm_ffa: Simplify probe function firmware: arm_ffa: Ensure drivers provide a probe function firmware: arm_scmi: Fix possible scmi_linux_errmap buffer overflow firmware: arm_scmi: Ensure drivers provide a probe function ...
2021-07-17Revert "mm/slub: use stackdepot to save stack trace in objects"Linus Torvalds
This reverts commit 788691464c29455346dc613a3b43c2fb9e5757a4. It's not clear why, but it causes unexplained problems in entirely unrelated xfs code. The most likely explanation is some slab corruption, possibly triggered due to CONFIG_SLUB_DEBUG_ON. See [1]. It ends up having a few other problems too, like build errors on arch/arc, and Geert reporting it using much more memory on m68k [3] (it probably does so elsewhere too, but it is probably just more noticeable on m68k). The architecture issues (both build and memory use) are likely just because this change effectively force-enabled STACKDEPOT (along with a very bad default value for the stackdepot hash size). But together with the xfs issue, this all smells like "this commit was not ready" to me. Link: https://lore.kernel.org/linux-xfs/YPE3l82acwgI2OiV@infradead.org/ [1] Link: https://lore.kernel.org/lkml/202107150600.LkGNb4Vb-lkp@intel.com/ [2] Link: https://lore.kernel.org/lkml/CAMuHMdW=eoVzM1Re5FVoEN87nKfiLmM2+Ah7eNu2KXEhCvbZyA@mail.gmail.com/ [3] Reported-by: Christoph Hellwig <hch@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-17Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "One core fix for an oops which can occur if the error handling thread fails to start for some reason and the driver is removed. The other fixes are all minor ones in drivers" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: core: Add missing host_lock in ufshcd_vops_setup_xfer_req() scsi: mpi3mr: Fix W=1 compilation warnings scsi: pm8001: Clean up kernel-doc and comments scsi: zfcp: Report port fc_security as unknown early during remote cable pull scsi: core: Fix bad pointer dereference when ehandler kthread is invalid scsi: fas216: Fix a build error scsi: core: Fix the documentation of the scsi_execute() time parameter
2021-07-17Merge tag '5.14-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifs fixes from Steve French: "Eight cifs/smb3 fixes, including three for stable. Three are DFS related fixes, and two to fix problems pointed out by static checkers" * tag '5.14-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: do not share tcp sessions of dfs connections SMB3.1.1: fix mount failure to some servers when compression enabled cifs: added WARN_ON for all the count decrements cifs: fix missing null session check in mount cifs: handle reconnect of tcon when there is no cached dfs referral cifs: fix the out of range assignment to bit fields in parse_server_interfaces cifs: Do not use the original cruid when following DFS links for multiuser mounts cifs: use the expiry output of dns_query to schedule next resolution
2021-07-17Merge tag 'linux-kselftest-kunit-fixes-5.14-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kunit fixes from Shuah Khan: "Fixes to kunit tool and documentation: - fix asserts on older python versions - fixes to misleading error messages when TAP header format is incorrect or when file is missing - documentation fix: drop obsolete information about uml_abort coverage - remove unnecessary annotations" * tag 'linux-kselftest-kunit-fixes-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: tool: Assert the version requirement kunit: tool: remove unnecessary "annotations" import Documentation: kunit: drop obsolete note about uml_abort for coverage kunit: tool: Fix error messages for cases of no tests and wrong TAP header
2021-07-17Merge tag 'linux-kselftest-fixes-5.14-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fix from Shuah Khan: "A fix to memory-hotplug hot-remove test to stop spamming logs with dump_page() entries and slowing the system down to a crawl" * tag 'linux-kselftest-fixes-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: memory-hotplug: avoid spamming logs with dump_page(), ratio limit hot-remove error test
2021-07-17Merge tag 'trace-v5.14-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "Fix the histogram logic from possibly crashing the kernel Working on the histogram code, I found that if you dereference a char pointer in a trace event that happens to point to user space, it can crash the kernel, as it does no checks of that pointer. I have code coming that will do this better, so just remove this ability to treat character pointers in trace events as stings in the histogram" * tag 'trace-v5.14-5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Do not reference char * as a string in histograms
2021-07-17KVM: PPC: Fix kvm_arch_vcpu_ioctl vcpu_load leakNicholas Piggin
vcpu_put is not called if the user copy fails. This can result in preempt notifier corruption and crashes, among other issues. Fixes: b3cebfe8c1ca ("KVM: PPC: Move vcpu_load/vcpu_put down to each ioctl case in kvm_arch_vcpu_ioctl") Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210716024310.164448-2-npiggin@gmail.com
2021-07-17KVM: PPC: Book3S: Fix CONFIG_TRANSACTIONAL_MEM=n crashNicholas Piggin
When running CPU_FTR_P9_TM_HV_ASSIST, HFSCR[TM] is set for the guest even if the host has CONFIG_TRANSACTIONAL_MEM=n, which causes it to be unprepared to handle guest exits while transactional. Normal guests don't have a problem because the HTM capability will not be advertised, but a rogue or buggy one could crash the host. Fixes: 4bb3c7a0208f ("KVM: PPC: Book3S HV: Work around transactional memory bugs in POWER9") Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210716024310.164448-1-npiggin@gmail.com
2021-07-16Merge tag 'devicetree-fixes-for-5.14-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Drop 'resets' as required on renesas,du - Moving of fixed string patterns for 'properties' instead of 'patternProperties' - Drop more redundant minItems/maxItems that we merged in the merge window - Indentation warning fix for sja1105 * tag 'devicetree-fixes-for-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: display: renesas,du: Make resets optional on R-Car H1 dt-bindings: Move fixed string 'patternProperties' to 'properties' dt-bindings: More dropping redundant minItems/maxItems dt-bindings: net: dsa: sja1105: Fix indentation warnings
2021-07-16Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "The bulk of the diffstat consists of changes to our uaccess routines so that they fall back to bytewise copying prior to reporting complete failure when the initial (multi-byte) access faults. However, the most disappointing change here is that we've had to bump ARCH_DMA_MINALIGN back to 128 bytes thanks to Qualcomm's "Kryo" CPU, which ended up in the MSM8996 mobile SoC. Still, at least we're now aware of this design and one of the hardware designers confirmed the L2 cacheline size for us. Summary: - Fix instrumentation annotations for entry code - Ensure kernel MTE state is restored correctly on resume from suspend - Fix MTE fault from new strlen() routine - Fallback to byte-wise accesses on initial uaccess fault - Bump Clang requirement for BTI - Revert ARCH_DMA_MINALIGN back to 128 bytes (shakes fist at Qualcomm)" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: entry: fix KCOV suppression arm64: entry: add missing noinstr arm64: mte: fix restoration of GCR_EL1 from suspend arm64: Avoid premature usercopy failure arm64: Restrict ARM64_BTI_KERNEL to clang 12.0.0 and newer Revert "arm64: cache: Lower ARCH_DMA_MINALIGN to 64 (L1_CACHE_BYTES)" arm64: Add missing header <asm/smp.h> in two files arm64: fix strlen() with CONFIG_KASAN_HW_TAGS
2021-07-16ARM: dts: versatile: Fix up interrupt controller node namesSudeep Holla
Once the new schema interrupt-controller/arm,vic.yaml is added, we get the below warnings: arch/arm/boot/dts/versatile-ab.dt.yaml: intc@10140000: $nodename:0: 'intc@10140000' does not match '^interrupt-controller(@[0-9a-f,]+)*$' arch/arm/boot/dts/versatile-ab.dt.yaml: intc@10140000: 'clear-mask' does not match any of the regexes Fix the node names for the interrupt controller to conform to the standard node name interrupt-controller@.. Also drop invalid clear-mask property. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210701132118.759454-1-sudeep.holla@arm.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit (git 2.34.1) at 2025-09-12 09:44:19 +0000