summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-10-25Merge branch 'small-fixes-for-true-expression-checks'Jakub Kicinski
Jean Sacren says: ==================== Small fixes for true expression checks This series fixes checks of true !rc expression. ==================== Link: https://lore.kernel.org/r/cover.1634974124.git.sakiwit@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-25net: qed_dev: fix check of true !rc expressionJean Sacren
Remove the check of !rc in (!rc && !resc_lock_params.b_granted) since it is always true. Signed-off-by: Jean Sacren <sakiwit@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-25net: qed_ptp: fix check of true !rc expressionJean Sacren
Remove the check of !rc in (!rc && !params.b_granted) since it is always true. We should also use constant 0 for return. Signed-off-by: Jean Sacren <sakiwit@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-25mlxsw: pci: Recycle received packet upon allocation failureIdo Schimmel
When the driver fails to allocate a new Rx buffer, it passes an empty Rx descriptor (contains zero address and size) to the device and marks it as invalid by setting the skb pointer in the descriptor's metadata to NULL. After processing enough Rx descriptors, the driver will try to process the invalid descriptor, but will return immediately seeing that the skb pointer is NULL. Since the driver no longer passes new Rx descriptors to the device, the Rx queue will eventually become full and the device will start to drop packets. Fix this by recycling the received packet if allocation of the new packet failed. This means that allocation is no longer performed at the end of the Rx routine, but at the start, before tearing down the DMA mapping of the received packet. Remove the comment about the descriptor being zeroed as it is no longer correct. This is OK because we either use the descriptor as-is (when recycling) or overwrite its address and size fields with that of the newly allocated Rx buffer. The issue was discovered when a process ("perf") consumed too much memory and put the system under memory pressure. It can be reproduced by injecting slab allocation failures [1]. After the fix, the Rx queue no longer comes to a halt. [1] # echo 10 > /sys/kernel/debug/failslab/times # echo 1000 > /sys/kernel/debug/failslab/interval # echo 100 > /sys/kernel/debug/failslab/probability FAULT_INJECTION: forcing a failure. name failslab, interval 1000, probability 100, space 0, times 8 [...] Call Trace: <IRQ> dump_stack_lvl+0x34/0x44 should_fail.cold+0x32/0x37 should_failslab+0x5/0x10 kmem_cache_alloc_node+0x23/0x190 __alloc_skb+0x1f9/0x280 __netdev_alloc_skb+0x3a/0x150 mlxsw_pci_rdq_skb_alloc+0x24/0x90 mlxsw_pci_cq_tasklet+0x3dc/0x1200 tasklet_action_common.constprop.0+0x9f/0x100 __do_softirq+0xb5/0x252 irq_exit_rcu+0x7a/0xa0 common_interrupt+0x83/0xa0 </IRQ> asm_common_interrupt+0x1e/0x40 RIP: 0010:cpuidle_enter_state+0xc8/0x340 [...] mlxsw_spectrum2 0000:06:00.0: Failed to alloc skb for RDQ Fixes: eda6500a987a ("mlxsw: Add PCI bus implementation") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/20211024064014.1060919-1-idosch@idosch.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-25Merge branch 'tcp-receive-path-optimizations'Jakub Kicinski
Eric Dumazet says: ==================== tcp: receive path optimizations This series aims to reduce cache line misses in RX path. I am still working on better cache locality in tcp_sock but this will wait few more weeks. ==================== Link: https://lore.kernel.org/r/20211025164825.259415-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-25ipv6/tcp: small drop monitor changesEric Dumazet
Two kfree_skb() calls must be replaced by consume_skb() for skbs that are not technically dropped. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-25ipv4: guard IP_MINTTL with a static keyEric Dumazet
RFC 5082 IP_MINTTL option is rarely used on hosts. Add a static key to remove from TCP fast path useless code, and potential cache line miss to fetch inet_sk(sk)->min_ttl Note that once ip4_min_ttl static key has been enabled, it stays enabled until next boot. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-25ipv4: annotate data races arount inet->min_ttlEric Dumazet
No report yet from KCSAN, yet worth documenting the races. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-25ipv6: guard IPV6_MINHOPCOUNT with a static keyEric Dumazet
RFC 5082 IPV6_MINHOPCOUNT is rarely used on hosts. Add a static key to remove from TCP fast path useless code, and potential cache line miss to fetch tcp_inet6_sk(sk)->min_hopcount Note that once ip6_min_hopcount static key has been enabled, it stays enabled until next boot. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-25ipv6: annotate data races around np->min_hopcountEric Dumazet
No report yet from KCSAN, yet worth documenting the races. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-25net: annotate accesses to sk->sk_rx_queue_mappingEric Dumazet
sk->sk_rx_queue_mapping can be modified locklessly, add a couple of READ_ONCE()/WRITE_ONCE() to document this fact. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-25net: avoid dirtying sk->sk_rx_queue_mappingEric Dumazet
sk_rx_queue_mapping is located in a cache line that should be kept read mostly. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-25net: avoid dirtying sk->sk_napi_idEric Dumazet
sk_napi_id is located in a cache line that can be kept read mostly. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-25ipv6: move inet6_sk(sk)->rx_dst_cookie to sk->sk_rx_dst_cookieEric Dumazet
Increase cache locality by moving rx_dst_coookie next to sk->sk_rx_dst This removes one or two cache line misses in IPv6 early demux (TCP/UDP) Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-25tcp: move inet->rx_dst_ifindex to sk->sk_rx_dst_ifindexEric Dumazet
Increase cache locality by moving rx_dst_ifindex next to sk->sk_rx_dst This is part of an effort to reduce cache line misses in TCP fast path. This removes one cache line miss in early demux. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-25ax88796c: fix fetching error stats from percpu containersAlexander Lobakin
rx_dropped, tx_dropped, rx_frame_errors and rx_crc_errors are being wrongly fetched from the target container rather than source percpu ones. No idea if that goes from the vendor driver or was brainoed during the refactoring, but fix it either way. Fixes: a97c69ba4f30e ("net: ax88796c: ASIX AX88796C SPI Ethernet Adapter Driver") Signed-off-by: Alexander Lobakin <alobakin@pm.me> Acked-by: Łukasz Stelmach <l.stelmach@samsung.com> Link: https://lore.kernel.org/r/20211023121148.113466-1-alobakin@pm.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-25net/mlx5: SF_DEV Add SF device trace pointsParav Pandit
Add SF device add and delete specific trace points. echo mlx5:mlx5_sf_dev_add >> /sys/kernel/debug/tracing/set_event echo mlx5:mlx5_sf_dev_del >> /sys/kernel/debug/tracing/set_event echo mlx5:mlx5_sf_vhca_event >> /sys/kernel/debug/tracing/set_event Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-25net/mlx5: SF, Add SF trace pointsParav Pandit
Add support for trace events for SFs to improve debugging. This covers (a) port add and free trace points (b) device level trace points (c) SF hardware context add, free trace points. (d) SF function activate/deacticate and state trace points SF events examples: echo mlx5:mlx5_sf_add >> /sys/kernel/debug/tracing/set_event echo mlx5:mlx5_sf_free >> /sys/kernel/debug/tracing/set_event echo mlx5:mlx5_sf_hwc_alloc >> /sys/kernel/debug/tracing/set_event echo mlx5:mlx5_sf_hwc_free >> /sys/kernel/debug/tracing/set_event echo mlx5:mlx5_sf_hwc_deferred_free >> /sys/kernel/debug/tracing/set_event echo mlx5:mlx5_sf_update_state >> /sys/kernel/debug/tracing/set_event echo mlx5:mlx5_sf_activate >> /sys/kernel/debug/tracing/set_event echo mlx5:mlx5_sf_deactivate >> /sys/kernel/debug/tracing/set_event Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-25net/mlx5: Let user configure max_macs paramShay Drory
Currently, max_macs is taking 70Kbytes of memory per function. This size is not needed in all use cases, and is critical with large scale. Hence, allow user to configure the number of max_macs. For example, to reduce the number of max_macs to 1, execute:: $ devlink dev param set pci/0000:00:0b.0 name max_macs value 1 \ cmode driverinit $ devlink dev reload pci/0000:00:0b.0 Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-25net/mlx5: Let user configure event_eq_size paramShay Drory
Event EQ is an EQ which received the notification of almost all the events generated by the NIC. Currently, each event EQ is taking 512KB of memory. This size is not needed in most use cases, and is critical with large scale. Hence, allow user to configure the size of the event EQ. For example to reduce event EQ size to 64, execute:: $ devlink resource set pci/0000:00:0b.0 path /event_eq_size/ size 64 $ devlink dev reload pci/0000:00:0b.0 Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-25net/mlx5: Let user configure io_eq_size paramShay Drory
Currently, each I/O EQ is taking 128KB of memory. This size is not needed in all use cases, and is critical with large scale. Hence, allow user to configure the size of I/O EQs. For example, to reduce I/O EQ size to 64, execute: $ devlink resource set pci/0000:00:0b.0 path /io_eq_size/ size 64 $ devlink dev reload pci/0000:00:0b.0 Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-25net/mlx5: Bridge, support replacing existing FDB entryVlad Buslov
The SWITCHDEV_FDB_ADD_TO_DEVICE is used for both adding new and replacing existing entry. Implement support for replacing existing FDB entries in mlx5 offload code. Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-25net/mlx5: Bridge, extract code to lookup and del/notify entryVlad Buslov
Following two patterns in bridge code are used in multiple places where similar code is duplicated: - Lookup FDB entry from hashtable by address+vid pair. - Notify software bridge and then delete existing FDB entry. In order to improve code quality and prepare for following patch series that also uses described patterns, extract the codes to dedicated helper functions. This commit doesn't change functionality. Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-25net/mlx5: Add periodic update of host time to firmwareAya Levin
Firmware logs its asserts also to non-volatile memory. In order to reduce drift between the NIC and the host, the driver sets the host epoch-time to the firmware every hour. Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-25net/mlx5: Print health buffer by log levelAya Levin
Add log macro which gets log level as a parameter. Use the severity read from the health buffer and the new log macro to log the health buffer with severity as log level. Prior to this patch, health buffer was printed in error log level regardless of its severity. Now the user may filter dmesg (--level) or change kernel log level to focus on different severity levels of firmware errors. Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-25net/mlx5: Extend health buffer dumpAya Levin
Enhance health buffer to include: - assert_var5: expose the 6'th assert variable. - time: error's time-stamp in seconds (epoch time). - rfr: Recovery Flow Requiered. When set, indicates that the error cannot be recovered without flow involving reset. - severity: error's severity value, ranging from emergency to debug. Expose them in the health buffer dump (dmesg and devlink fw reporter). Health buffer in dmesg: mlx5_core 0000:08:00.0: print_health_info:425:(pid 912): Health issue observed, firmware internal error, severity(3) ERROR: mlx5_core 0000:08:00.0: print_health_info:429:(pid 912): assert_var[0] 0x08040700 mlx5_core 0000:08:00.0: print_health_info:429:(pid 912): assert_var[1] 0x00000000 mlx5_core 0000:08:00.0: print_health_info:429:(pid 912): assert_var[2] 0x00000000 mlx5_core 0000:08:00.0: print_health_info:429:(pid 912): assert_var[3] 0x00000000 mlx5_core 0000:08:00.0: print_health_info:429:(pid 912): assert_var[4] 0x00000000 mlx5_core 0000:08:00.0: print_health_info:429:(pid 912): assert_var[5] 0x00000000 mlx5_core 0000:08:00.0: print_health_info:432:(pid 912): assert_exit_ptr 0x00aaf800 mlx5_core 0000:08:00.0: print_health_info:434:(pid 912): assert_callra 0x00aaf70c mlx5_core 0000:08:00.0: print_health_info:436:(pid 912): fw_ver 16.32.492 mlx5_core 0000:08:00.0: print_health_info:437:(pid 912): time 1634819758 mlx5_core 0000:08:00.0: print_health_info:438:(pid 912): hw_id 0x0000020d mlx5_core 0000:08:00.0: print_health_info:439:(pid 912): rfr 0 mlx5_core 0000:08:00.0: print_health_info:440:(pid 912): severity 3 (ERROR) mlx5_core 0000:08:00.0: print_health_info:441:(pid 912): irisc_index 9 mlx5_core 0000:08:00.0: print_health_info:442:(pid 912): synd 0x1: firmware internal error mlx5_core 0000:08:00.0: print_health_info:444:(pid 912): ext_synd 0x802b mlx5_core 0000:08:00.0: print_health_info:445:(pid 912): raw fw_ver 0x102001ec Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-25net/mlx5: Reduce flow counters bulk query buffer size for SFsAvihai Horon
Currently, the flow counters bulk query buffer takes a little more than 512KB of memory, which is aligned to the next power of 2, to 1MB. The buffer size determines the maximum number of flow counters that can be queried at a time. Thus, having a bigger buffer can improve performance for users that need to query many flow counters. SFs don't use many flow counters and don't need a big buffer. Since this size is critical with large scale, reduce the size of the bulk query buffer for SFs. Signed-off-by: Avihai Horon <avihaih@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-25net/mlx5: Fix unused function warning of mlx5i_flow_type_maskShay Drory
The cited commit is causing unused-function warning[1] when CONFIG_MLX5_EN_RXNFC is not set. Fix this by moving the function into the ifdef, where it's only used [1] warning: ‘mlx5i_flow_type_mask’ defined but not used [-Wunused-function] Fixes: 9fbe1c25ecca ("net/mlx5i: Enable Rx steering for IPoIB via ethtool") Signed-off-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-25net/mlx5: Remove unnecessary checks for slow path flagPaul Blakey
After previous changes, caller (mlx5e_tc_offload_fdb_rules()) already checks for the slow path flag, and if set won't call offload/unoffload sample. Signed-off-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-25net/mlx5e: don't write directly to netdev->dev_addrJakub Kicinski
Use a local buffer and eth_hw_addr_set() Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-25ice: check whether PTP is initialized in ice_ptp_release()Yongxin Liu
PTP is currently only supported on E810 devices, it is checked in ice_ptp_init(). However, there is no check in ice_ptp_release(). For other E800 series devices, ice_ptp_release() will be wrongly executed. Fix the following calltrace. INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. Workqueue: ice ice_service_task [ice] Call Trace: dump_stack_lvl+0x5b/0x82 dump_stack+0x10/0x12 register_lock_class+0x495/0x4a0 ? find_held_lock+0x3c/0xb0 __lock_acquire+0x71/0x1830 lock_acquire+0x1e6/0x330 ? ice_ptp_release+0x3c/0x1e0 [ice] ? _raw_spin_lock+0x19/0x70 ? ice_ptp_release+0x3c/0x1e0 [ice] _raw_spin_lock+0x38/0x70 ? ice_ptp_release+0x3c/0x1e0 [ice] ice_ptp_release+0x3c/0x1e0 [ice] ice_prepare_for_reset+0xcb/0xe0 [ice] ice_do_reset+0x38/0x110 [ice] ice_service_task+0x138/0xf10 [ice] ? __this_cpu_preempt_check+0x13/0x20 process_one_work+0x26a/0x650 worker_thread+0x3f/0x3b0 ? __kthread_parkme+0x51/0xb0 ? process_one_work+0x650/0x650 kthread+0x161/0x190 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x1f/0x30 Fixes: 4dd0d5c33c3e ("ice: add lock around Tx timestamp tracker flush") Signed-off-by: Yongxin Liu <yongxin.liu@windriver.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-25ice: Respond to a NETDEV_UNREGISTER event for LAGDave Ertman
When the PF is a member of a link aggregate, and the driver is removed, the process will hang unless we respond to the NETDEV_UNREGISTER event that is sent to the event_handler for LAG. Add a case statement for the ice_lag_event_handler to unlink the PF from the link aggregate. Also remove code that was incorrectly applying a dev_hold to peer_netdevs that were associated with the ice driver. Fixes: df006dd4b1dc ("ice: Add initial support framework for LAG") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-25Revert "arm64: dts: qcom: sm8250: remove bus clock from the mdss node for ↵Amit Pundir
sm8250 target" This reverts commit 001ce9785c0674d913531345e86222c965fc8bf4. This upstream commit broke AOSP (post Android 12 merge) build on RB5. The device either silently crashes into USB crash mode after android boot animation or we see a blank blue screen with following dpu errors in dmesg: [ T444] hw recovery is not complete for ctl:3 [ T444] [drm:dpu_encoder_phys_vid_prepare_for_kickoff:539] [dpu error]enc31 intf1 ctl 3 reset failure: -22 [ T444] [drm:dpu_encoder_phys_vid_wait_for_commit_done:513] [dpu error]vblank timeout [ T444] [drm:dpu_kms_wait_for_commit_done:454] [dpu error]wait for commit done returned -110 [ C7] [drm:dpu_encoder_frame_done_timeout:2127] [dpu error]enc31 frame done timeout [ T444] [drm:dpu_encoder_phys_vid_wait_for_commit_done:513] [dpu error]vblank timeout [ T444] [drm:dpu_kms_wait_for_commit_done:454] [dpu error]wait for commit done returned -110 Fixes: 001ce9785c06 ("arm64: dts: qcom: sm8250: remove bus clock from the mdss node for sm8250 target") Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211014135410.4136412-1-dmitry.baryshkov@linaro.org
2021-10-25Linux 5.15-rc7v5.15-rc7Linus Torvalds
2021-10-25secretmem: Prevent secretmem_users from wrapping to zeroMatthew Wilcox (Oracle)
Commit 110860541f44 ("mm/secretmem: use refcount_t instead of atomic_t") attempted to fix the problem of secretmem_users wrapping to zero and allowing suspend once again. But it was reverted in commit 87066fdd2e30 ("Revert 'mm/secretmem: use refcount_t instead of atomic_t'") because of the problems it caused - a refcount_t was not semantically the right type to use. Instead prevent secretmem_users from wrapping to zero by forbidding new users if the number of users has wrapped from positive to negative. This stops a long way short of reaching the necessary 4 billion users where it wraps to zero again, so there's no need to be clever with special anti-wrap types or checking the return value from atomic_inc(). Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Jordy Zomer <jordy@pwning.systems> Cc: Kees Cook <keescook@chromium.org>, Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-10-25Merge branch 'bluetooth-don-t-write-directly-to-netdev-dev_addr'Jakub Kicinski
Jakub Kicinski says: ==================== bluetooth: don't write directly to netdev->dev_addr The usual conversions. ==================== Link: https://lore.kernel.org/r/20211022231834.2710245-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-25bluetooth: use dev_addr_set()Jakub Kicinski
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it go through appropriate helpers. Reviewed-by: Marcel Holtmann <marcel@holtmann.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-25bluetooth: use eth_hw_addr_set()Jakub Kicinski
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it go through appropriate helpers. Convert bluetooth from memcpy(... ETH_ADDR) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, ETH_ALEN) + eth_hw_addr_set(dev, np) Reviewed-by: Marcel Holtmann <marcel@holtmann.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-25spi: Fix tegra20 build with CONFIG_PM=n once againLinus Torvalds
Commit efafec27c565 ("spi: Fix tegra20 build with CONFIG_PM=n") already fixed the build without PM support once. There was an alternative fix by Guenter in commit 2bab94090b01 ("spi: tegra20-slink: Declare runtime suspend and resume functions conditionally"), and Mark then merged the two correctly in ffb1e76f4f32 ("Merge tag 'v5.15-rc2' into spi-5.15"). But for some inexplicable reason, Mark then merged things _again_ in commit 59c4e190b10c ("Merge tag 'v5.15-rc3' into spi-5.15"), and screwed things up at that point, and the __maybe_unused attribute on tegra_slink_runtime_resume() went missing. Reinstate it, so that alpha (and other architectures without PM support) builds cleanly again. Btw, this is another prime example of how random back-merges are not good. Just don't do them. Subsystem developers should not merge my tree in any normal circumstances. Both of those merge commits pointed to above are bad: even the one that got the merge result right doesn't even mention _why_ it was done, and the one that got it wrong is obviously broken. Reported-by: Guenter Roeck <linux@roeck-us.net> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-10-25Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: - Fix clang-related relocation warning in futex code - Fix incorrect use of get_kernel_nofault() - Fix bad code generation in __get_user_check() when kasan is enabled - Ensure TLB function table is correctly aligned - Remove duplicated string function definitions in decompressor - Fix link-time orphan section warnings - Fix old-style function prototype for arch_init_kprobes() - Only warn about XIP address when not compile testing - Handle BE32 big endian for keystone2 remapping * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9148/1: handle CONFIG_CPU_ENDIAN_BE32 in arch/arm/kernel/head.S ARM: 9141/1: only warn about XIP address when not compile testing ARM: 9139/1: kprobes: fix arch_init_kprobes() prototype ARM: 9138/1: fix link warning with XIP + frame-pointer ARM: 9134/1: remove duplicate memcpy() definition ARM: 9133/1: mm: proc-macros: ensure *_tlb_fns are 4B aligned ARM: 9132/1: Fix __get_user_check failure with ARM KASAN images ARM: 9125/1: fix incorrect use of get_kernel_nofault() ARM: 9122/1: select HAVE_FUTEX_CMPXCHG
2021-10-25fddi: defza: add missing pointer type castJakub Kicinski
hw_addr is a uint AKA unsigned int. dev_addr_set() takes a u8 *. drivers/net/fddi/defza.c:1383:27: error: passing argument 2 of 'dev_addr_set' from incompatible pointer type [-Werror=incompatible-pointer-types] Reported-by: kernel test robot <lkp@intel.com> Fixes: 1e9258c389ee ("fddi: defxx,defza: use dev_addr_set()") Acked-by: Maciej W. Rozycki <macro@orcam.me.uk> Link: https://lore.kernel.org/r/20211025160000.2803818-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-25Merge tag 'libata-5.15-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull libata fix from Damien Le Moal: "A single fix in this pull request addressing an invalid error code return in the sata_mv driver (from Zheyu)" * tag 'libata-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: sata_mv: Fix the error handling of mv_chip_id()
2021-10-25Merge tag 'pinctrl-v5.15-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Some late pin control fixes, the most generally annoying will probably be the AMD IRQ storm fix affecting the Microsoft surface. Summary: - Three fixes pertaining to Broadcom DT bindings. Some stuff didn't work out as inteded, we need to back out - A resume bug fix in the STM32 driver - Disable and mask the interrupts on probe in the AMD pinctrl driver, affecting Microsoft surface" * tag 'pinctrl-v5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: amd: disable and mask interrupts on probe pinctrl: stm32: use valid pin identifier in stm32_pinctrl_resume() Revert "pinctrl: bcm: ns: support updated DT binding as syscon subnode" dt-bindings: pinctrl: brcm,ns-pinmux: drop unneeded CRU from example Revert "dt-bindings: pinctrl: bcm4708-pinmux: rework binding to use syscon"
2021-10-25net-sysfs: initialize uid and gid before calling net_ns_get_ownershipXin Long
Currently in net_ns_get_ownership() it may not be able to set uid or gid if make_kuid or make_kgid returns an invalid value, and an uninit-value issue can be triggered by this. This patch is to fix it by initializing the uid and gid before calling net_ns_get_ownership(), as it does in kobject_get_ownership() Fixes: e6dee9f3893c ("net-sysfs: add netdev_change_owner()") Reported-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25xen/netfront: stop tx queues during live migrationDongli Zhang
The tx queues are not stopped during the live migration. As a result, the ndo_start_xmit() may access netfront_info->queues which is freed by talk_to_netback()->xennet_destroy_queues(). This patch is to netif_device_detach() at the beginning of xen-netfront resuming, and netif_device_attach() at the end of resuming. CPU A CPU B talk_to_netback() -> if (info->queues) xennet_destroy_queues(info); to free netfront_info->queues xennet_start_xmit() to access netfront_info->queues -> err = xennet_create_queues(info, &num_queues); The idea is borrowed from virtio-net. Cc: Joe Jin <joe.jin@oracle.com> Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25net: Prevent infinite while loop in skb_tx_hash()Michael Chan
Drivers call netdev_set_num_tc() and then netdev_set_tc_queue() to set the queue count and offset for each TC. So the queue count and offset for the TCs may be zero for a short period after dev->num_tc has been set. If a TX packet is being transmitted at this time in the code path netdev_pick_tx() -> skb_tx_hash(), skb_tx_hash() may see nonzero dev->num_tc but zero qcount for the TC. The while loop that keeps looping while hash >= qcount will not end. Fix it by checking the TC's qcount to be nonzero before using it. Fixes: eadec877ce9c ("net: Add support for subordinate traffic classes to netdev_pick_tx") Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25net/tls: getsockopt supports complete algorithm listTianjia Zhang
AES_CCM_128 and CHACHA20_POLY1305 are already supported by tls, similar to setsockopt, getsockopt also needs to support these two algorithms. Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25net/tls: tls_crypto_context add supported algorithms contextTianjia Zhang
tls already supports the SM4 GCM/CCM algorithms. It is also necessary to add support for these two algorithms in tls_crypto_context to avoid potential issues caused by forced type conversion. Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25RDMA/sa_query: Use strscpy_pad instead of memcpy to copy a stringMark Zhang
When copying the device name, the length of the data memcpy copied exceeds the length of the source buffer, which cause the KASAN issue below. Use strscpy_pad() instead. BUG: KASAN: slab-out-of-bounds in ib_nl_set_path_rec_attrs+0x136/0x320 [ib_core] Read of size 64 at addr ffff88811a10f5e0 by task rping/140263 CPU: 3 PID: 140263 Comm: rping Not tainted 5.15.0-rc1+ #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack_lvl+0x57/0x7d print_address_description.constprop.0+0x1d/0xa0 kasan_report+0xcb/0x110 kasan_check_range+0x13d/0x180 memcpy+0x20/0x60 ib_nl_set_path_rec_attrs+0x136/0x320 [ib_core] ib_nl_make_request+0x1c6/0x380 [ib_core] send_mad+0x20a/0x220 [ib_core] ib_sa_path_rec_get+0x3e3/0x800 [ib_core] cma_query_ib_route+0x29b/0x390 [rdma_cm] rdma_resolve_route+0x308/0x3e0 [rdma_cm] ucma_resolve_route+0xe1/0x150 [rdma_ucm] ucma_write+0x17b/0x1f0 [rdma_ucm] vfs_write+0x142/0x4d0 ksys_write+0x133/0x160 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f26499aa90f Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 29 fd ff ff 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 5c fd ff ff 48 RSP: 002b:00007f26495f2dc0 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00000000000007d0 RCX: 00007f26499aa90f RDX: 0000000000000010 RSI: 00007f26495f2e00 RDI: 0000000000000003 RBP: 00005632a8315440 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000293 R12: 00007f26495f2e00 R13: 00005632a83154e0 R14: 00005632a8315440 R15: 00005632a830a810 Allocated by task 131419: kasan_save_stack+0x1b/0x40 __kasan_kmalloc+0x7c/0x90 proc_self_get_link+0x8b/0x100 pick_link+0x4f1/0x5c0 step_into+0x2eb/0x3d0 walk_component+0xc8/0x2c0 link_path_walk+0x3b8/0x580 path_openat+0x101/0x230 do_filp_open+0x12e/0x240 do_sys_openat2+0x115/0x280 __x64_sys_openat+0xce/0x140 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 2ca546b92a02 ("IB/sa: Route SA pathrecord query through netlink") Link: https://lore.kernel.org/r/72ede0f6dab61f7f23df9ac7a70666e07ef314b0.1635055496.git.leonro@nvidia.com Signed-off-by: Mark Zhang <markzhang@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-10-25mlxsw: spectrum: Use 'bitmap_zalloc()' when applicableChristophe JAILLET
Use 'bitmap_zalloc()' to simplify code, improve the semantic and avoid some open-coded arithmetic in allocator arguments. Also change the corresponding 'kfree()' into 'bitmap_free()' to keep consistency. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-12 18:39:13 +0000