summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-05-18RDMA/core: Don't access cm_id after its destructionShay Drory
restrack should only be attached to a cm_id while the ID has a valid device pointer. It is set up when the device is first loaded, but not cleared when the device is removed. There is also two copies of the device pointer, one private and one in the public API, and these were left out of sync. Make everything go to NULL together and manipulate restrack right around the device assignments. Found by syzcaller: BUG: KASAN: wild-memory-access in __list_del include/linux/list.h:112 [inline] BUG: KASAN: wild-memory-access in __list_del_entry include/linux/list.h:135 [inline] BUG: KASAN: wild-memory-access in list_del include/linux/list.h:146 [inline] BUG: KASAN: wild-memory-access in cma_cancel_listens drivers/infiniband/core/cma.c:1767 [inline] BUG: KASAN: wild-memory-access in cma_cancel_operation drivers/infiniband/core/cma.c:1795 [inline] BUG: KASAN: wild-memory-access in cma_cancel_operation+0x1f4/0x4b0 drivers/infiniband/core/cma.c:1783 Write of size 8 at addr dead000000000108 by task syz-executor716/334 CPU: 0 PID: 334 Comm: syz-executor716 Not tainted 5.11.0+ #271 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0xbe/0xf9 lib/dump_stack.c:120 __kasan_report mm/kasan/report.c:400 [inline] kasan_report.cold+0x5f/0xd5 mm/kasan/report.c:413 __list_del include/linux/list.h:112 [inline] __list_del_entry include/linux/list.h:135 [inline] list_del include/linux/list.h:146 [inline] cma_cancel_listens drivers/infiniband/core/cma.c:1767 [inline] cma_cancel_operation drivers/infiniband/core/cma.c:1795 [inline] cma_cancel_operation+0x1f4/0x4b0 drivers/infiniband/core/cma.c:1783 _destroy_id+0x29/0x460 drivers/infiniband/core/cma.c:1862 ucma_close_id+0x36/0x50 drivers/infiniband/core/ucma.c:185 ucma_destroy_private_ctx+0x58d/0x5b0 drivers/infiniband/core/ucma.c:576 ucma_close+0x91/0xd0 drivers/infiniband/core/ucma.c:1797 __fput+0x169/0x540 fs/file_table.c:280 task_work_run+0xb7/0x100 kernel/task_work.c:140 exit_task_work include/linux/task_work.h:30 [inline] do_exit+0x7da/0x17f0 kernel/exit.c:825 do_group_exit+0x9e/0x190 kernel/exit.c:922 __do_sys_exit_group kernel/exit.c:933 [inline] __se_sys_exit_group kernel/exit.c:931 [inline] __x64_sys_exit_group+0x2d/0x30 kernel/exit.c:931 do_syscall_64+0x2d/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 255d0c14b375 ("RDMA/cma: rdma_bind_addr() leaks a cma_dev reference count") Link: https://lore.kernel.org/r/3352ee288fe34f2b44220457a29bfc0548686363.1620711734.git.leonro@nvidia.com Signed-off-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-05-18Merge tag 'v5.13-rc2' into spi-5.13Mark Brown
Linux 5.13-rc2
2021-05-18debugfs: fix security_locked_down() call for SELinuxOndrej Mosnacek
When (ia->ia_valid & (ATTR_MODE | ATTR_UID | ATTR_GID)) is zero, then the SELinux implementation of the locked_down hook might report a denial even though the operation would actually be allowed. To fix this, make sure that security_locked_down() is called only when the return value will be taken into account (i.e. when changing one of the problematic attributes). Note: this was introduced by commit 5496197f9b08 ("debugfs: Restrict debugfs when the kernel is locked down"), but it didn't matter at that time, as the SELinux support came in later. Fixes: 59438b46471a ("security,lockdown,selinux: implement SELinux lockdown") Cc: stable <stable@vger.kernel.org> Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Link: https://lore.kernel.org/r/20210507125304.144394-1-omosnace@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-18ARM: npcm: wpcm450: select interrupt controller driverJonathan Neuschäfer
The interrupt controller driver is necessary in order to have a functioning Linux system on WPCM450. Select it in mach-npcm/Kconfig. Fixes: ece3fe93e8f4 ("ARM: npcm: Introduce Nuvoton WPCM450 SoC") Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210513165627.1767093-1-j.neuschaefer@gmx.net Link: https://lore.kernel.org/r/20210518071514.604492-1-joel@jms.id.au' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-05-18MAINTAINERS: Add Alain Volmat as STM32 SPI maintainerAlain Volmat
Add Alain Volmat as STM32 SPI maintainer. Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/1620796842-23546-1-git-send-email-alain.volmat@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-18regulator: fan53880: Convert to use .probe_newAxel Lin
Use the new .probe_new for fan53880. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Christoph Fritz <chf.fritz@googlemail.com> Link: https://lore.kernel.org/r/20210517105325.1227393-2-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-18regulator: bd71815: Fix missing include filesAxel Lin
Include linux/of.h and linux/gpio/consumer.h to fix below errors: error: implicit declaration of function ‘of_match_ptr’ error: implicit declaration of function ‘devm_gpiod_get_from_of_node’ Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/20210518114843.1495152-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-18dt-bindings: spi: spi-mux: rename flash nodeMichael Walle
The recent conversion of the common MTD properties to YAML now mandates a particular node name for SPI flash devices. Reported-by: Rob Herring <robh@kernel.org> Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210517153946.9502-1-michael@walle.cc Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-18ASoC: fsl: fix SND_SOC_IMX_RPMSG dependencyArnd Bergmann
Kconfig produces a warning with SND_SOC_FSL_RPMSG=y and SND_IMX_SOC=m: WARNING: unmet direct dependencies detected for SND_SOC_IMX_RPMSG Depends on [m]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_IMX_SOC [=m] && RPMSG [=y] Selected by [y]: - SND_SOC_FSL_RPMSG [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && COMMON_CLK [=y] && RPMSG [=y] && SND_IMX_SOC [=m]!=n Add a dependency to prevent this configuration. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com> Link: https://lore.kernel.org/r/20210514213118.630427-1-arnd@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-18locking/mutex: clear MUTEX_FLAGS if wait_list is empty due to signalZqiang
When a interruptible mutex locker is interrupted by a signal without acquiring this lock and removed from the wait queue. if the mutex isn't contended enough to have a waiter put into the wait queue again, the setting of the WAITER bit will force mutex locker to go into the slowpath to acquire the lock every time, so if the wait queue is empty, the WAITER bit need to be clear. Fixes: 040a0a371005 ("mutex: Add support for wound/wait style locks") Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Zqiang <qiang.zhang@windriver.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20210517034005.30828-1-qiang.zhang@windriver.com
2021-05-18locking/lockdep: Correct calling tracepointsLeo Yan
The commit eb1f00237aca ("lockdep,trace: Expose tracepoints") reverses tracepoints for lock_contended() and lock_acquired(), thus the ftrace log shows the wrong locking sequence that "acquired" event is prior to "contended" event: <idle>-0 [001] d.s3 20803.501685: lock_acquire: 0000000008b91ab4 &sg_policy->update_lock <idle>-0 [001] d.s3 20803.501686: lock_acquired: 0000000008b91ab4 &sg_policy->update_lock <idle>-0 [001] d.s3 20803.501689: lock_contended: 0000000008b91ab4 &sg_policy->update_lock <idle>-0 [001] d.s3 20803.501690: lock_release: 0000000008b91ab4 &sg_policy->update_lock This patch fixes calling tracepoints for lock_contended() and lock_acquired(). Fixes: eb1f00237aca ("lockdep,trace: Expose tracepoints") Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20210512120937.90211-1-leo.yan@linaro.org
2021-05-18perf/x86/lbr: Remove cpuc->lbr_xsave allocation from atomic contextLike Xu
If the kernel is compiled with the CONFIG_LOCKDEP option, the conditional might_sleep_if() deep in kmem_cache_alloc() will generate the following trace, and potentially cause a deadlock when another LBR event is added: [] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:196 [] Call Trace: [] kmem_cache_alloc+0x36/0x250 [] intel_pmu_lbr_add+0x152/0x170 [] x86_pmu_add+0x83/0xd0 Make it symmetric with the release_lbr_buffers() call and mirror the existing DS buffers. Fixes: c085fb8774 ("perf/x86/intel/lbr: Support XSAVES for arch LBR read") Signed-off-by: Like Xu <like.xu@linux.intel.com> [peterz: simplified] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Kan Liang <kan.liang@linux.intel.com> Link: https://lkml.kernel.org/r/20210430052247.3079672-2-like.xu@linux.intel.com
2021-05-18perf/x86: Avoid touching LBR_TOS MSR for Arch LBRLike Xu
The Architecture LBR does not have MSR_LBR_TOS (0x000001c9). In a guest that should support Architecture LBR, check_msr() will be a non-related check for the architecture MSR 0x0 (IA32_P5_MC_ADDR) that is also not supported by KVM. The failure will cause x86_pmu.lbr_nr = 0, thereby preventing the initialization of the guest Arch LBR. Fix it by avoiding this extraneous check in intel_pmu_init() for Arch LBR. Fixes: 47125db27e47 ("perf/x86/intel/lbr: Support Architectural LBR") Signed-off-by: Like Xu <like.xu@linux.intel.com> [peterz: simpler still] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20210430052247.3079672-1-like.xu@linux.intel.com
2021-05-18arm64: Fix stale link in the arch_counter_enforce_ordering() commentCatalin Marinas
With infradead.org archives gone, update the link to lore.kernel.org as these links are deemed stable. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-05-18iommu/virtio: Add missing MODULE_DEVICE_TABLEBixuan Cui
This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Bixuan Cui <cuibixuan@huawei.com> Fixes: fa4afd78ea12 ("iommu/virtio: Build virtio-iommu as module") Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Link: https://lore.kernel.org/r/20210508031451.53493-1-cuibixuan@huawei.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-05-18iommu/amd: Fix wrong parentheses on page-specific invalidationsNadav Amit
The logic to determine the mask of page-specific invalidations was tested in userspace. As the code was copied into the kernel, the parentheses were mistakenly set in the wrong place, resulting in the wrong mask. Fix it. Cc: Joerg Roedel <joro@8bytes.org> Cc: Will Deacon <will@kernel.org> Cc: Jiajun Cao <caojiajun@vmware.com> Cc: iommu@lists.linux-foundation.org Cc: linux-kernel@vger.kernel.org Fixes: 268aa4548277 ("iommu/amd: Page-specific invalidations for more than one page") Signed-off-by: Nadav Amit <namit@vmware.com> Link: https://lore.kernel.org/r/20210502070001.1559127-2-namit@vmware.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-05-18iommu/amd: Clear DMA ops when switching domainJean-Philippe Brucker
Since commit 08a27c1c3ecf ("iommu: Add support to change default domain of an iommu group") a user can switch a device between IOMMU and direct DMA through sysfs. This doesn't work for AMD IOMMU at the moment because dev->dma_ops is not cleared when switching from a DMA to an identity IOMMU domain. The DMA layer thus attempts to use the dma-iommu ops on an identity domain, causing an oops: # echo 0000:00:05.0 > /sys/sys/bus/pci/drivers/e1000e/unbind # echo identity > /sys/bus/pci/devices/0000:00:05.0/iommu_group/type # echo 0000:00:05.0 > /sys/sys/bus/pci/drivers/e1000e/bind ... BUG: kernel NULL pointer dereference, address: 0000000000000028 ... Call Trace: iommu_dma_alloc e1000e_setup_tx_resources e1000e_open Since iommu_change_dev_def_domain() calls probe_finalize() again, clear the dma_ops there like Vt-d does. Fixes: 08a27c1c3ecf ("iommu: Add support to change default domain of an iommu group") Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Link: https://lore.kernel.org/r/20210422094216.2282097-1-jean-philippe@linaro.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-05-18ALSA: dice: fix stream format for TC Electronic Konnekt Live at high ↵Takashi Sakamoto
sampling transfer frequency At high sampling transfer frequency, TC Electronic Konnekt Live transfers/receives 6 audio data frames in multi bit linear audio data channel of data block in CIP payload. Current hard-coded stream format is wrong. Cc: <stable@vger.kernel.org> Fixes: f1f0f330b1d0 ("ALSA: dice: add parameters of stream formats for models produced by TC Electronic") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210518012612.37268-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-05-18ALSA: dice: disable double_pcm_frames mode for M-Audio Profire 610, 2626 and ↵Takashi Sakamoto
Avid M-Box 3 Pro ALSA dice driver detects jumbo payload at high sampling transfer frequency for below models: * Avid M-Box 3 Pro * M-Audio Profire 610 * M-Audio Profire 2626 Although many DICE-based devices have a quirk at high sampling transfer frequency to multiplex double number of PCM frames into data block than the number in IEC 61883-1/6, the above devices are just compliant to IEC 61883-1/6. This commit disables the mode of double_pcm_frames for the models. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210518012510.37126-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-05-18x86/sev-es: Invalidate the GHCB after completing VMGEXITTom Lendacky
Since the VMGEXIT instruction can be issued from userspace, invalidate the GHCB after performing VMGEXIT processing in the kernel. Invalidation is only required after userspace is available, so call vc_ghcb_invalidate() from sev_es_put_ghcb(). Update vc_ghcb_invalidate() to additionally clear the GHCB exit code so that it is always presented as 0 when VMGEXIT has been issued by anything else besides the kernel. Fixes: 0786138c78e79 ("x86/sev-es: Add a Runtime #VC Exception Handler") Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/5a8130462e4f0057ee1184509cd056eedd78742b.1621273353.git.thomas.lendacky@amd.com
2021-05-18x86/sev-es: Move sev_es_put_ghcb() in prep for follow on patchTom Lendacky
Move the location of sev_es_put_ghcb() in preparation for an update to it in a follow-on patch. This will better highlight the changes being made to the function. No functional change. Fixes: 0786138c78e79 ("x86/sev-es: Add a Runtime #VC Exception Handler") Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/8c07662ec17d3d82e5c53841a1d9e766d3bdbab6.1621273353.git.thomas.lendacky@amd.com
2021-05-17tools arch kvm: Sync kvm headers with the kernel sourcesArnaldo Carvalho de Melo
To pick up the changes from: 70f094f4f01dc4d6 ("KVM: nVMX: Properly pad 'struct kvm_vmx_nested_state_hdr'") That don't entail changes in tooling. This silences these tools/perf build warnings: Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h' diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-05-17perf buildid-list: Initialize zstd_dataMilian Wolff
Fixes segmentation fault when trying to obtain buildid list (e.g. via perf-archive) from a zstd-compressed `perf.data` file: ``` $ perf record -z ls ... [ perf record: Captured and wrote 0,010 MB perf.data, compressed (original 0,001 MB, ratio is 2,190) ] $ memcheck perf buildid-list ... ==57268== Invalid read of size 4 ==57268== at 0x5260D88: ZSTD_decompressStream (in /usr/lib/libzstd.so.1.4.9) ==57268== by 0x4BB51B: zstd_decompress_stream (zstd.c:100) ==57268== by 0x425C6C: perf_session__process_compressed_event (session.c:73) ==57268== by 0x427450: perf_session__process_user_event (session.c:1631) ==57268== by 0x42A609: reader__process_events (session.c:2207) ==57268== by 0x42A609: __perf_session__process_events (session.c:2264) ==57268== by 0x42A609: perf_session__process_events (session.c:2297) ==57268== by 0x343A62: perf_session__list_build_ids (builtin-buildid-list.c:88) ==57268== by 0x343A62: cmd_buildid_list (builtin-buildid-list.c:120) ==57268== by 0x3C7732: run_builtin (perf.c:313) ==57268== by 0x331157: handle_internal_command (perf.c:365) ==57268== by 0x331157: run_argv (perf.c:409) ==57268== by 0x331157: main (perf.c:539) ==57268== Address 0x7470 is not stack'd, malloc'd or (recently) free'd ``` Signed-off-by: Milian Wolff <milian.wolff@kdab.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Link: http://lore.kernel.org/lkml/20210429185759.59870-1-milian.wolff@kdab.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-05-17net: mdiobus: get rid of a BUG_ON()Dan Carpenter
We spotted a bug recently during a review where a driver was unregistering a bus that wasn't registered, which would trigger this BUG_ON(). Let's handle that situation more gracefully, and just print a warning and return. Reported-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17Merge branch 'gve-fixes'David S. Miller
David Awogbemila says: ==================== GVE bug fixes This patch series includes fixes to some bugs in the gve driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17gve: Correct SKB queue index validation.David Awogbemila
SKBs with skb_get_queue_mapping(skb) == tx_cfg.num_queues should also be considered invalid. Fixes: f5cedc84a30d ("gve: Add transmit and receive support") Signed-off-by: David Awogbemila <awogbemila@google.com> Acked-by: Willem de Brujin <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17gve: Upgrade memory barrier in poll routineCatherine Sullivan
As currently written, if the driver checks for more work (via gve_tx_poll or gve_rx_poll) before the device posts work and the irq doorbell is not unmasked (via iowrite32be(GVE_IRQ_ACK | GVE_IRQ_EVENT, ...)) before the device attempts to raise an interrupt, an interrupt is lost and this could potentially lead to the traffic being completely halted. For example, if a tx queue has already been stopped, the driver won't get the chance to complete work and egress will be halted. We need a full memory barrier in the poll routine to ensure that the irq doorbell is unmasked before the driver checks for more work. Fixes: f5cedc84a30d ("gve: Add transmit and receive support") Signed-off-by: Catherine Sullivan <csully@google.com> Signed-off-by: David Awogbemila <awogbemila@google.com> Acked-by: Willem de Brujin <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17gve: Add NULL pointer checks when freeing irqs.David Awogbemila
When freeing notification blocks, we index priv->msix_vectors. If we failed to allocate priv->msix_vectors (see abort_with_msix_vectors) this could lead to a NULL pointer dereference if the driver is unloaded. Fixes: 893ce44df565 ("gve: Add basic driver framework for Compute Engine Virtual NIC") Signed-off-by: David Awogbemila <awogbemila@google.com> Acked-by: Willem de Brujin <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17gve: Update mgmt_msix_idx if num_ntfy changesDavid Awogbemila
If we do not get the expected number of vectors from pci_enable_msix_range, we update priv->num_ntfy_blks but not priv->mgmt_msix_idx. This patch fixes this so that priv->mgmt_msix_idx is updated accordingly. Fixes: f5cedc84a30d ("gve: Add transmit and receive support") Signed-off-by: David Awogbemila <awogbemila@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17gve: Check TX QPL was actually assignedCatherine Sullivan
Correctly check the TX QPL was assigned and unassigned if other steps in the allocation fail. Fixes: f5cedc84a30d (gve: Add transmit and receive support) Signed-off-by: Catherine Sullivan <csully@google.com> Signed-off-by: David Awogbemila <awogbemila@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17netlink: disable IRQs for netlink_lock_table()Johannes Berg
Syzbot reports that in mac80211 we have a potential deadlock between our "local->stop_queue_reasons_lock" (spinlock) and netlink's nl_table_lock (rwlock). This is because there's at least one situation in which we might try to send a netlink message with this spinlock held while it is also possible to take the spinlock from a hardirq context, resulting in the following deadlock scenario reported by lockdep: CPU0 CPU1 ---- ---- lock(nl_table_lock); local_irq_disable(); lock(&local->queue_stop_reason_lock); lock(nl_table_lock); <Interrupt> lock(&local->queue_stop_reason_lock); This seems valid, we can take the queue_stop_reason_lock in any kind of context ("CPU0"), and call ieee80211_report_ack_skb() with the spinlock held and IRQs disabled ("CPU1") in some code path (ieee80211_do_stop() via ieee80211_free_txskb()). Short of disallowing netlink use in scenarios like these (which would be rather complex in mac80211's case due to the deep callchain), it seems the only fix for this is to disable IRQs while nl_table_lock is held to avoid hitting this scenario, this disallows the "CPU0" portion of the reported deadlock. Note that the writer side (netlink_table_grab()) already disables IRQs for this lock. Unfortunately though, this seems like a huge hammer, and maybe the whole netlink table locking should be reworked. Reported-by: syzbot+69ff9dff50dcfe14ddd4@syzkaller.appspotmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17net/smc: remove device from smcd_dev_list after failed device_add()Julian Wiedmann
If the device_add() for a smcd_dev fails, there's no cleanup step that rolls back the earlier list_add(). The device subsequently gets freed, and we end up with a corrupted list. Add some error handling that removes the device from the list. Fixes: c6ba7c9ba43d ("net/smc: add base infrastructure for SMC-D and ISM") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17bonding: init notify_work earlier to avoid uninitialized useJohannes Berg
If bond_kobj_init() or later kzalloc() in bond_alloc_slave() fail, then we call kobject_put() on the slave->kobj. This in turn calls the release function slave_kobj_release() which will always try to cancel_delayed_work_sync(&slave->notify_work), which shouldn't be done on an uninitialized work struct. Always initialize the work struct earlier to avoid problems here. Syzbot bisected this down to a completely pointless commit, some fault injection may have been at work here that caused the alloc failure in the first place, which may interact badly with bisect. Reported-by: syzbot+bfda097c12a00c8cae67@syzkaller.appspotmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17MAINTAINERS: net: remove stale website linkKrzysztof Kozlowski
The http://www.linuxfoundation.org/en/Net does not contain networking subsystem description ("Nothing found"). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17dt-bindings: More removals of type references on common propertiesRob Herring
Users of common properties shouldn't have a type definition as the common schemas already have one. A few new ones slipped in and *-names was missed in the last clean-up pass. Drop all the unnecessary type references in the tree. A meta-schema update to catch these is pending. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Olivier Moysan <olivier.moysan@foss.st.com> Cc: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Orson Zhai <orsonzhai@gmail.com> Cc: Baolin Wang <baolin.wang7@gmail.com> Cc: Chunyan Zhang <zhang.lyra@gmail.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Fabrice Gasnier <fabrice.gasnier@st.com> Cc: Odelu Kukatla <okukatla@codeaurora.org> Cc: Alex Elder <elder@kernel.org> Cc: Shengjiu Wang <shengjiu.wang@nxp.com> Cc: linux-clk@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: linux-iio@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-input@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Georgi Djakov <djakov@kernel.org> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20210510204524.617390-1-robh@kernel.org
2021-05-17dt-bindings: media: renesas,drif: Use graph schemaRob Herring
Convert the renesas,drif binding schema to use the graph schema. The binding referred to video-interfaces.txt, but it doesn't actually use any properties from it as 'sync-active' is a custom property. As 'sync-active' is custom, it needs a type definition. Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Ramesh Shanmugasundaram <rashanmu@gmail.com> Cc: linux-media@vger.kernel.org Cc: linux-renesas-soc@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Link: https://lore.kernel.org/r/20210510203514.603471-1-robh@kernel.org
2021-05-17tipc: wait and exit until all work queues are doneXin Long
On some host, a crash could be triggered simply by repeating these commands several times: # modprobe tipc # tipc bearer enable media udp name UDP1 localip 127.0.0.1 # rmmod tipc [] BUG: unable to handle kernel paging request at ffffffffc096bb00 [] Workqueue: events 0xffffffffc096bb00 [] Call Trace: [] ? process_one_work+0x1a7/0x360 [] ? worker_thread+0x30/0x390 [] ? create_worker+0x1a0/0x1a0 [] ? kthread+0x116/0x130 [] ? kthread_flush_work_fn+0x10/0x10 [] ? ret_from_fork+0x35/0x40 When removing the TIPC module, the UDP tunnel sock will be delayed to release in a work queue as sock_release() can't be done in rtnl_lock(). If the work queue is schedule to run after the TIPC module is removed, kernel will crash as the work queue function cleanup_beareri() code no longer exists when trying to invoke it. To fix it, this patch introduce a member wq_count in tipc_net to track the numbers of work queues in schedule, and wait and exit until all work queues are done in tipc_exit_net(). Fixes: d0f91938bede ("tipc: add ip/udp media type") Reported-by: Shuang Li <shuali@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17mld: fix panic in mld_newpack()Taehee Yoo
mld_newpack() doesn't allow to allocate high order page, only order-0 allocation is allowed. If headroom size is too large, a kernel panic could occur in skb_put(). Test commands: ip netns del A ip netns del B ip netns add A ip netns add B ip link add veth0 type veth peer name veth1 ip link set veth0 netns A ip link set veth1 netns B ip netns exec A ip link set lo up ip netns exec A ip link set veth0 up ip netns exec A ip -6 a a 2001:db8:0::1/64 dev veth0 ip netns exec B ip link set lo up ip netns exec B ip link set veth1 up ip netns exec B ip -6 a a 2001:db8:0::2/64 dev veth1 for i in {1..99} do let A=$i-1 ip netns exec A ip link add ip6gre$i type ip6gre \ local 2001:db8:$A::1 remote 2001:db8:$A::2 encaplimit 100 ip netns exec A ip -6 a a 2001:db8:$i::1/64 dev ip6gre$i ip netns exec A ip link set ip6gre$i up ip netns exec B ip link add ip6gre$i type ip6gre \ local 2001:db8:$A::2 remote 2001:db8:$A::1 encaplimit 100 ip netns exec B ip -6 a a 2001:db8:$i::2/64 dev ip6gre$i ip netns exec B ip link set ip6gre$i up done Splat looks like: kernel BUG at net/core/skbuff.c:110! invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI CPU: 0 PID: 7 Comm: kworker/0:1 Not tainted 5.12.0+ #891 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:skb_panic+0x15d/0x15f Code: 92 fe 4c 8b 4c 24 10 53 8b 4d 70 45 89 e0 48 c7 c7 00 ae 79 83 41 57 41 56 41 55 48 8b 54 24 a6 26 f9 ff <0f> 0b 48 8b 6c 24 20 89 34 24 e8 4a 4e 92 fe 8b 34 24 48 c7 c1 20 RSP: 0018:ffff88810091f820 EFLAGS: 00010282 RAX: 0000000000000089 RBX: ffff8881086e9000 RCX: 0000000000000000 RDX: 0000000000000089 RSI: 0000000000000008 RDI: ffffed1020123efb RBP: ffff888005f6eac0 R08: ffffed1022fc0031 R09: ffffed1022fc0031 R10: ffff888117e00187 R11: ffffed1022fc0030 R12: 0000000000000028 R13: ffff888008284eb0 R14: 0000000000000ed8 R15: 0000000000000ec0 FS: 0000000000000000(0000) GS:ffff888117c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8b801c5640 CR3: 0000000033c2c006 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600 ? ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600 skb_put.cold.104+0x22/0x22 ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600 ? rcu_read_lock_sched_held+0x91/0xc0 mld_newpack+0x398/0x8f0 ? ip6_mc_hdr.isra.26.constprop.46+0x600/0x600 ? lock_contended+0xc40/0xc40 add_grhead.isra.33+0x280/0x380 add_grec+0x5ca/0xff0 ? mld_sendpack+0xf40/0xf40 ? lock_downgrade+0x690/0x690 mld_send_initial_cr.part.34+0xb9/0x180 ipv6_mc_dad_complete+0x15d/0x1b0 addrconf_dad_completed+0x8d2/0xbb0 ? lock_downgrade+0x690/0x690 ? addrconf_rs_timer+0x660/0x660 ? addrconf_dad_work+0x73c/0x10e0 addrconf_dad_work+0x73c/0x10e0 Allowing high order page allocation could fix this problem. Fixes: 72e09ad107e7 ("ipv6: avoid high order allocations") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17isdn: mISDN: netjet: Fix crash in nj_probe:Zheyu Ma
'nj_setup' in netjet.c might fail with -EIO and in this case 'card->irq' is initialized and is bigger than zero. A subsequent call to 'nj_release' will free the irq that has not been requested. Fix this bug by deleting the previous assignment to 'card->irq' and just keep the assignment before 'request_irq'. The KASAN's log reveals it: [ 3.354615 ] WARNING: CPU: 0 PID: 1 at kernel/irq/manage.c:1826 free_irq+0x100/0x480 [ 3.355112 ] Modules linked in: [ 3.355310 ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc1-00144-g25a1298726e #13 [ 3.355816 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 3.356552 ] RIP: 0010:free_irq+0x100/0x480 [ 3.356820 ] Code: 6e 08 74 6f 4d 89 f4 e8 5e ac 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 4f ac 09 00 8b 75 c8 48 c7 c7 78 c1 2e 85 e8 e0 cf f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 72 33 0b 03 48 8b 43 40 4c 8b a0 80 [ 3.358012 ] RSP: 0000:ffffc90000017b48 EFLAGS: 00010082 [ 3.358357 ] RAX: 0000000000000000 RBX: ffff888104dc8000 RCX: 0000000000000000 [ 3.358814 ] RDX: ffff8881003c8000 RSI: ffffffff8124a9e6 RDI: 00000000ffffffff [ 3.359272 ] RBP: ffffc90000017b88 R08: 0000000000000000 R09: 0000000000000000 [ 3.359732 ] R10: ffffc900000179f0 R11: 0000000000001d04 R12: 0000000000000000 [ 3.360195 ] R13: ffff888107dc6000 R14: ffff888107dc6928 R15: ffff888104dc80a8 [ 3.360652 ] FS: 0000000000000000(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000 [ 3.361170 ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.361538 ] CR2: 0000000000000000 CR3: 000000000582e000 CR4: 00000000000006f0 [ 3.362003 ] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3.362175 ] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3.362175 ] Call Trace: [ 3.362175 ] nj_release+0x51/0x1e0 [ 3.362175 ] nj_probe+0x450/0x950 [ 3.362175 ] ? pci_device_remove+0x110/0x110 [ 3.362175 ] local_pci_probe+0x45/0xa0 [ 3.362175 ] pci_device_probe+0x12b/0x1d0 [ 3.362175 ] really_probe+0x2a9/0x610 [ 3.362175 ] driver_probe_device+0x90/0x1d0 [ 3.362175 ] ? mutex_lock_nested+0x1b/0x20 [ 3.362175 ] device_driver_attach+0x68/0x70 [ 3.362175 ] __driver_attach+0x124/0x1b0 [ 3.362175 ] ? device_driver_attach+0x70/0x70 [ 3.362175 ] bus_for_each_dev+0xbb/0x110 [ 3.362175 ] ? rdinit_setup+0x45/0x45 [ 3.362175 ] driver_attach+0x27/0x30 [ 3.362175 ] bus_add_driver+0x1eb/0x2a0 [ 3.362175 ] driver_register+0xa9/0x180 [ 3.362175 ] __pci_register_driver+0x82/0x90 [ 3.362175 ] ? w6692_init+0x38/0x38 [ 3.362175 ] nj_init+0x36/0x38 [ 3.362175 ] do_one_initcall+0x7f/0x3d0 [ 3.362175 ] ? rdinit_setup+0x45/0x45 [ 3.362175 ] ? rcu_read_lock_sched_held+0x4f/0x80 [ 3.362175 ] kernel_init_freeable+0x2aa/0x301 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] kernel_init+0x18/0x190 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] ret_from_fork+0x1f/0x30 [ 3.362175 ] Kernel panic - not syncing: panic_on_warn set ... [ 3.362175 ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc1-00144-g25a1298726e #13 [ 3.362175 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 3.362175 ] Call Trace: [ 3.362175 ] dump_stack+0xba/0xf5 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] panic+0x15a/0x3f2 [ 3.362175 ] ? __warn+0xf2/0x150 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] __warn+0x108/0x150 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] report_bug+0x119/0x1c0 [ 3.362175 ] handle_bug+0x3b/0x80 [ 3.362175 ] exc_invalid_op+0x18/0x70 [ 3.362175 ] asm_exc_invalid_op+0x12/0x20 [ 3.362175 ] RIP: 0010:free_irq+0x100/0x480 [ 3.362175 ] Code: 6e 08 74 6f 4d 89 f4 e8 5e ac 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 4f ac 09 00 8b 75 c8 48 c7 c7 78 c1 2e 85 e8 e0 cf f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 72 33 0b 03 48 8b 43 40 4c 8b a0 80 [ 3.362175 ] RSP: 0000:ffffc90000017b48 EFLAGS: 00010082 [ 3.362175 ] RAX: 0000000000000000 RBX: ffff888104dc8000 RCX: 0000000000000000 [ 3.362175 ] RDX: ffff8881003c8000 RSI: ffffffff8124a9e6 RDI: 00000000ffffffff [ 3.362175 ] RBP: ffffc90000017b88 R08: 0000000000000000 R09: 0000000000000000 [ 3.362175 ] R10: ffffc900000179f0 R11: 0000000000001d04 R12: 0000000000000000 [ 3.362175 ] R13: ffff888107dc6000 R14: ffff888107dc6928 R15: ffff888104dc80a8 [ 3.362175 ] ? vprintk+0x76/0x150 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] nj_release+0x51/0x1e0 [ 3.362175 ] nj_probe+0x450/0x950 [ 3.362175 ] ? pci_device_remove+0x110/0x110 [ 3.362175 ] local_pci_probe+0x45/0xa0 [ 3.362175 ] pci_device_probe+0x12b/0x1d0 [ 3.362175 ] really_probe+0x2a9/0x610 [ 3.362175 ] driver_probe_device+0x90/0x1d0 [ 3.362175 ] ? mutex_lock_nested+0x1b/0x20 [ 3.362175 ] device_driver_attach+0x68/0x70 [ 3.362175 ] __driver_attach+0x124/0x1b0 [ 3.362175 ] ? device_driver_attach+0x70/0x70 [ 3.362175 ] bus_for_each_dev+0xbb/0x110 [ 3.362175 ] ? rdinit_setup+0x45/0x45 [ 3.362175 ] driver_attach+0x27/0x30 [ 3.362175 ] bus_add_driver+0x1eb/0x2a0 [ 3.362175 ] driver_register+0xa9/0x180 [ 3.362175 ] __pci_register_driver+0x82/0x90 [ 3.362175 ] ? w6692_init+0x38/0x38 [ 3.362175 ] nj_init+0x36/0x38 [ 3.362175 ] do_one_initcall+0x7f/0x3d0 [ 3.362175 ] ? rdinit_setup+0x45/0x45 [ 3.362175 ] ? rcu_read_lock_sched_held+0x4f/0x80 [ 3.362175 ] kernel_init_freeable+0x2aa/0x301 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] kernel_init+0x18/0x190 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] ret_from_fork+0x1f/0x30 [ 3.362175 ] Dumping ftrace buffer: [ 3.362175 ] (ftrace buffer empty) [ 3.362175 ] Kernel Offset: disabled [ 3.362175 ] Rebooting in 1 seconds.. Reported-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17Merge branch 'bnxt_en-fixes'David S. Miller
Michael Chan says: ==================== bnxt_en: 2 bug fixes. The first one fixes a bug to properly identify some recently added HyperV device IDs. The second one fixes device context memory set up on systems with 64K page size. Please queue these for -stable as well. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17bnxt_en: Fix context memory setup for 64K page size.Michael Chan
There was a typo in the code that checks for 64K BNXT_PAGE_SHIFT in bnxt_hwrm_set_pg_attr(). Fix it and make the code more understandable with a new macro BNXT_SET_CTX_PAGE_ATTR(). Fixes: 1b9394e5a2ad ("bnxt_en: Configure context memory on new devices.") Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17bnxt_en: Include new P5 HV definition in VF check.Andy Gospodarek
Otherwise, some of the recently added HyperV VF IDs would not be recognized as VF devices and they would not initialize properly. Fixes: 7fbf359bb2c1 ("bnxt_en: Add PCI IDs for Hyper-V VF devices.") Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17net: bnx2: Fix error return code in bnx2_init_board()Zhen Lei
Fix to return -EPERM from the error handling case instead of 0, as done elsewhere in this function. Fixes: b6016b767397 ("[BNX2]: New Broadcom gigabit network driver.") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17NFC: nci: fix memory leak in nci_allocate_deviceDongliang Mu
nfcmrvl_disconnect fails to free the hci_dev field in struct nci_dev. Fix this by freeing hci_dev in nci_free_device. BUG: memory leak unreferenced object 0xffff888111ea6800 (size 1024): comm "kworker/1:0", pid 19, jiffies 4294942308 (age 13.580s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 60 fd 0c 81 88 ff ff .........`...... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000004bc25d43>] kmalloc include/linux/slab.h:552 [inline] [<000000004bc25d43>] kzalloc include/linux/slab.h:682 [inline] [<000000004bc25d43>] nci_hci_allocate+0x21/0xd0 net/nfc/nci/hci.c:784 [<00000000c59cff92>] nci_allocate_device net/nfc/nci/core.c:1170 [inline] [<00000000c59cff92>] nci_allocate_device+0x10b/0x160 net/nfc/nci/core.c:1132 [<00000000006e0a8e>] nfcmrvl_nci_register_dev+0x10a/0x1c0 drivers/nfc/nfcmrvl/main.c:153 [<000000004da1b57e>] nfcmrvl_probe+0x223/0x290 drivers/nfc/nfcmrvl/usb.c:345 [<00000000d506aed9>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396 [<00000000bc632c92>] really_probe+0x159/0x4a0 drivers/base/dd.c:554 [<00000000f5009125>] driver_probe_device+0x84/0x100 drivers/base/dd.c:740 [<000000000ce658ca>] __device_attach_driver+0xee/0x110 drivers/base/dd.c:846 [<000000007067d05f>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:431 [<00000000f8e13372>] __device_attach+0x122/0x250 drivers/base/dd.c:914 [<000000009cf68860>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:491 [<00000000359c965a>] device_add+0x5be/0xc30 drivers/base/core.c:3109 [<00000000086e4bd3>] usb_set_configuration+0x9d9/0xb90 drivers/usb/core/message.c:2164 [<00000000ca036872>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238 [<00000000d40d36f6>] usb_probe_device+0x5c/0x140 drivers/usb/core/driver.c:293 [<00000000bc632c92>] really_probe+0x159/0x4a0 drivers/base/dd.c:554 Reported-by: syzbot+19bcfc64a8df1318d1c3@syzkaller.appspotmail.com Fixes: 11f54f228643 ("NFC: nci: Add HCI over NCI protocol support") Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17net: hso: check for allocation failure in hso_create_bulk_serial_device()Dan Carpenter
In current kernels, small allocations never actually fail so this patch shouldn't affect runtime. Originally this error handling code written with the idea that if the "serial->tiocmget" allocation failed, then we would continue operating instead of bailing out early. But in later years we added an unchecked dereference on the next line. serial->tiocmget->serial_state_notification = kzalloc(); ^^^^^^^^^^^^^^^^^^ Since these allocations are never going fail in real life, this is mostly a philosophical debate, but I think bailing out early is the correct behavior that the user would want. And generally it's safer to bail as soon an error happens. Fixes: af0de1303c4e ("usb: hso: obey DMA rules in tiocmget") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17tipc: skb_linearize the head skb when reassembling msgsXin Long
It's not a good idea to append the frag skb to a skb's frag_list if the frag_list already has skbs from elsewhere, such as this skb was created by pskb_copy() where the frag_list was cloned (all the skbs in it were skb_get'ed) and shared by multiple skbs. However, the new appended frag skb should have been only seen by the current skb. Otherwise, it will cause use after free crashes as this appended frag skb are seen by multiple skbs but it only got skb_get called once. The same thing happens with a skb updated by pskb_may_pull() with a skb_cloned skb. Li Shuang has reported quite a few crashes caused by this when doing testing over macvlan devices: [] kernel BUG at net/core/skbuff.c:1970! [] Call Trace: [] skb_clone+0x4d/0xb0 [] macvlan_broadcast+0xd8/0x160 [macvlan] [] macvlan_process_broadcast+0x148/0x150 [macvlan] [] process_one_work+0x1a7/0x360 [] worker_thread+0x30/0x390 [] kernel BUG at mm/usercopy.c:102! [] Call Trace: [] __check_heap_object+0xd3/0x100 [] __check_object_size+0xff/0x16b [] simple_copy_to_iter+0x1c/0x30 [] __skb_datagram_iter+0x7d/0x310 [] __skb_datagram_iter+0x2a5/0x310 [] skb_copy_datagram_iter+0x3b/0x90 [] tipc_recvmsg+0x14a/0x3a0 [tipc] [] ____sys_recvmsg+0x91/0x150 [] ___sys_recvmsg+0x7b/0xc0 [] kernel BUG at mm/slub.c:305! [] Call Trace: [] <IRQ> [] kmem_cache_free+0x3ff/0x400 [] __netif_receive_skb_core+0x12c/0xc40 [] ? kmem_cache_alloc+0x12e/0x270 [] netif_receive_skb_internal+0x3d/0xb0 [] ? get_rx_page_info+0x8e/0xa0 [be2net] [] be_poll+0x6ef/0xd00 [be2net] [] ? irq_exit+0x4f/0x100 [] net_rx_action+0x149/0x3b0 ... This patch is to fix it by linearizing the head skb if it has frag_list set in tipc_buf_append(). Note that we choose to do this before calling skb_unshare(), as __skb_linearize() will avoid skb_copy(). Also, we can not just drop the frag_list either as the early time. Fixes: 45c8b7b175ce ("tipc: allow non-linear first fragment buffer") Reported-by: Li Shuang <shuali@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17Merge tag 'irqchip-fixes-5.13-1' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes from Marc Zyngier: - Fix PXA Mainstone CPLD irq allocation in legacy mode - Restrict the Apple AIC controller to the Apple platform - Remove a few supperfluous messages on devm_ioremap_resource() failure Link: https://lore.kernel.org/r/20210516122217.13234-1-maz@kernel.org
2021-05-17Merge tag 'for-5.13-rc2-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "A few more fixes: - fix fiemap to print extents that could get misreported due to internal extent splitting and logical merging for fiemap output - fix RCU stalls during delayed iputs - fix removed dentries still existing after log is synced" * tag 'for-5.13-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix removed dentries still existing after log is synced btrfs: return whole extents in fiemap btrfs: avoid RCU stalls while running delayed iputs btrfs: return 0 for dev_extent_hole_check_zoned hole_start in case of error
2021-05-17RDMA/rxe: Return CQE error if invalid lkey was suppliedLeon Romanovsky
RXE is missing update of WQE status in LOCAL_WRITE failures. This caused the following kernel panic if someone sent an atomic operation with an explicitly wrong lkey. [leonro@vm ~]$ mkt test test_atomic_invalid_lkey (tests.test_atomic.AtomicTest) ... WARNING: CPU: 5 PID: 263 at drivers/infiniband/sw/rxe/rxe_comp.c:740 rxe_completer+0x1a6d/0x2e30 [rdma_rxe] Modules linked in: crc32_generic rdma_rxe ip6_udp_tunnel udp_tunnel rdma_ucm rdma_cm ib_umad ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core mlx5_core ptp pps_core CPU: 5 PID: 263 Comm: python3 Not tainted 5.13.0-rc1+ #2936 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:rxe_completer+0x1a6d/0x2e30 [rdma_rxe] Code: 03 0f 8e 65 0e 00 00 3b 93 10 06 00 00 0f 84 82 0a 00 00 4c 89 ff 4c 89 44 24 38 e8 2d 74 a9 e1 4c 8b 44 24 38 e9 1c f5 ff ff <0f> 0b e9 0c e8 ff ff b8 05 00 00 00 41 bf 05 00 00 00 e9 ab e7 ff RSP: 0018:ffff8880158af090 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888016a78000 RCX: ffffffffa0cf1652 RDX: 1ffff9200004b442 RSI: 0000000000000004 RDI: ffffc9000025a210 RBP: dffffc0000000000 R08: 00000000ffffffea R09: ffff88801617740b R10: ffffed1002c2ee81 R11: 0000000000000007 R12: ffff88800f3b63e8 R13: ffff888016a78008 R14: ffffc9000025a180 R15: 000000000000000c FS: 00007f88b622a740(0000) GS:ffff88806d540000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f88b5a1fa10 CR3: 000000000d848004 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: rxe_do_task+0x130/0x230 [rdma_rxe] rxe_rcv+0xb11/0x1df0 [rdma_rxe] rxe_loopback+0x157/0x1e0 [rdma_rxe] rxe_responder+0x5532/0x7620 [rdma_rxe] rxe_do_task+0x130/0x230 [rdma_rxe] rxe_rcv+0x9c8/0x1df0 [rdma_rxe] rxe_loopback+0x157/0x1e0 [rdma_rxe] rxe_requester+0x1efd/0x58c0 [rdma_rxe] rxe_do_task+0x130/0x230 [rdma_rxe] rxe_post_send+0x998/0x1860 [rdma_rxe] ib_uverbs_post_send+0xd5f/0x1220 [ib_uverbs] ib_uverbs_write+0x847/0xc80 [ib_uverbs] vfs_write+0x1c5/0x840 ksys_write+0x176/0x1d0 do_syscall_64+0x3f/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 8700e3e7c485 ("Soft RoCE driver") Link: https://lore.kernel.org/r/11e7b553f3a6f5371c6bb3f57c494bb52b88af99.1620711734.git.leonro@nvidia.com Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Acked-by: Zhu Yanjun <zyjzyj2000@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-05-17RDMA/mlx5: Recover from fatal event in dual port modeMaor Gottlieb
When there is fatal event on the slave port, the device is marked as not active. We need to mark it as active again when the slave is recovered to regain full functionality. Fixes: d69a24e03659 ("IB/mlx5: Move IB event processing onto a workqueue") Link: https://lore.kernel.org/r/8906754455bb23019ef223c725d2c0d38acfb80b.1620711734.git.leonro@nvidia.com Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
generated by cgit (git 2.34.1) at 2025-09-13 16:18:31 +0000