summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-10-25block: cope with WRITE ZEROES failing in blkdev_issue_zeroout()Ilya Dryomov
sd_config_write_same() ignores ->max_ws_blocks == 0 and resets it to permit trying WRITE SAME on older SCSI devices, unless ->no_write_same is set. Because REQ_OP_WRITE_ZEROES is implemented in terms of WRITE SAME, blkdev_issue_zeroout() may fail with -EREMOTEIO: $ fallocate -zn -l 1k /dev/sdg fallocate: fallocate failed: Remote I/O error $ fallocate -zn -l 1k /dev/sdg # OK $ fallocate -zn -l 1k /dev/sdg # OK The following calls succeed because sd_done() sets ->no_write_same in response to a sense that would become BLK_STS_TARGET/-EREMOTEIO, causing __blkdev_issue_zeroout() to fall back to generating ZERO_PAGE bios. This means blkdev_issue_zeroout() must cope with WRITE ZEROES failing and fall back to manually zeroing, unless BLKDEV_ZERO_NOFALLBACK is specified. For BLKDEV_ZERO_NOFALLBACK case, return -EOPNOTSUPP if sd_done() has just set ->no_write_same thus indicating lack of offload support. Fixes: c20cfc27a473 ("block: stop using blkdev_issue_write_same for zeroing") Cc: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-25block: factor out __blkdev_issue_zero_pages()Ilya Dryomov
blkdev_issue_zeroout() will use this in !BLKDEV_ZERO_NOFALLBACK case. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-25block: move CAP_SYS_ADMIN check in blkdev_roset()Ilya Dryomov
Check for CAP_SYS_ADMIN before calling into the driver, similar to blkdev_flushbuf(). This is safer and can spare a check in the driver. (Currently BLKROSET is overridden by md and rbd, rbd is missing the check. md has the check, but it covers a lot more than BLKROSET.) Acked-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-25SMB: fix validate negotiate info uninitialised memory useDavid Disseldorp
An undersize validate negotiate info server response causes the client to use uninitialised memory for struct validate_negotiate_info_rsp comparisons of Dialect, SecurityMode and/or Capabilities members. Link: https://bugzilla.samba.org/show_bug.cgi?id=13092 Fixes: 7db0a6efdc3e ("SMB3: Work around mount failure when using SMB3 dialect to Macs") Signed-off-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <smfrench@gmail.com>
2017-10-25SMB: fix leak of validate negotiate info response bufferDavid Disseldorp
Fixes: ff1c038addc4 ("Check SMB3 dialects against downgrade attacks") Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Steve French <smfrench@gmail.com>
2017-10-25CIFS: Fix NULL pointer deref on SMB2_tcon() failureAurélien Aptel
If SendReceive2() fails rsp is set to NULL but is dereferenced in the error handling code. Cc: stable@vger.kernel.org Signed-off-by: Aurelien Aptel <aaptel@suse.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <smfrench@gmail.com>
2017-10-25CIFS: do not send invalid input buffer on QUERY_INFO requestsAurelien Aptel
query_info() doesn't use the InputBuffer field of the QUERY_INFO request, therefore according to [MS-SMB2] it must: a) set the InputBufferOffset to 0 b) send a zero-length InputBuffer Doing a) is trivial but b) is a bit more tricky. The packet is allocated according to it's StructureSize, which takes into account an extra 1 byte buffer which we don't need here. StructureSize fields must have constant values no matter the actual length of the whole packet so we can't just edit that constant. Both the NetBIOS-over-TCP message length ("rfc1002 length") L and the iovec length L' have to be updated. Since L' is computed from L we just update L by decrementing it by one. Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <smfrench@gmail.com>
2017-10-25cifs: Select all required crypto modulesBenjamin Gilbert
Some dependencies were lost when CIFS_SMB2 was merged into CIFS. Fixes: 2a38e12053b7 ("[SMB3] Remove ifdef since SMB3 (and later) now STRONGLY preferred") Signed-off-by: Benjamin Gilbert <benjamin.gilbert@coreos.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> CC: Stable <stable@vger.kernel.org> Signed-off-by: Steve French <smfrench@gmail.com>
2017-10-25Merge tag 'perf-core-for-mingo-4.15-20171025' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core inline improvements from Arnaldo Carvalho de Melo: From Milian's cover letter: (Milian Wolff) "This series of patches completely reworks the way inline frames are handled. Instead of querying for the inline nodes on-demand in the individual tools, we now create proper callchain nodes for inlined frames. The advantages this approach brings are numerous: - Less duplicated code in the individual browser - Aggregated cost for inlined frames for the --children top-down list - Various bug fixes that arose from querying for a srcline/symbol based on the IP of a sample, which will always point to the last inlined frame instead of the corresponding non-inlined frame - Overall much better support for visualizing cost for heavily-inlined C++ code, which simply was confusing and unreliably before - srcline honors the global setting as to whether full paths or basenames should be shown - Caches for inlined frames and srcline information, which allow us to enable inline frame handling by default" Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-25xen/gntdev: avoid out of bounds access in case of partial gntdev_mmap()Juergen Gross
In case gntdev_mmap() succeeds only partially in mapping grant pages it will leave some vital information uninitialized needed later for cleanup. This will lead to an out of bounds array access when unmapping the already mapped pages. So just initialize the data needed for unmapping the pages a little bit earlier. Cc: <stable@vger.kernel.org> Reported-by: Arthur Borsboom <arthurborsboom@gmail.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-10-25perf symbols: Fix memory corruption because of zero length symbolsRavi Bangoria
Perf top is often crashing at very random locations on powerpc. After investigating, I found the crash only happens when sample is of zero length symbol. Powerpc kernel has many such symbols which does not contain length details in vmlinux binary and thus start and end addresses of such symbols are same. Structure struct sym_hist { u64 nr_samples; u64 period; struct sym_hist_entry addr[0]; }; has last member 'addr[]' of size zero. 'addr[]' is an array of addresses that belongs to one symbol (function). If function consist of 100 instructions, 'addr' points to an array of 100 'struct sym_hist_entry' elements. For zero length symbol, it points to the *empty* array, i.e. no members in the array and thus offset 0 is also invalid for such array. static int __symbol__inc_addr_samples(...) { ... offset = addr - sym->start; h = annotation__histogram(notes, evidx); h->nr_samples++; h->addr[offset].nr_samples++; h->period += sample->period; h->addr[offset].period += sample->period; ... } Here, when 'addr' is same as 'sym->start', 'offset' becomes 0, which is valid for normal symbols but *invalid* for zero length symbols and thus updating h->addr[offset] causes memory corruption. Fix this by adding one dummy element for zero length symbols. Link: https://lkml.org/lkml/2016/10/10/148 Fixes: edee44be5919 ("perf annotate: Don't throw error for zero length symbols") Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Kim Phillips <kim.phillips@arm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Taeung Song <treeze.taeung@gmail.com> Link: http://lkml.kernel.org/r/1508854806-10542-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-10-25powerpc/64s/radix: Fix preempt imbalance in TLB flushNicholas Piggin
Fixes: 424de9c6e3f8 ("powerpc/mm/radix: Avoid flushing the PWC on every flush_tlb_range") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-25scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9Rob Herring
Pickup the fix for handling unresolved phandles in overlays. This adds the following commits from upstream: c1e55a5513e9 checks: fix handling of unresolved phandles for dts plugins f8872e29ce06 tests: Avoid 64-bit arithmetic in assembler 48c91c08bcfa libfdt: add stringlist functions to linker script Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-25drm/i915/perf: fix perf enable/disable ioctls with 32bits userspaceLionel Landwerlin
The compat callback was missing and triggered failures in 32bits userspace when enabling/disable the perf stream. We don't require any particular processing here as these ioctls don't take any argument. Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Fixes: eec688e1420 ("drm/i915: Add i915 perf infrastructure") Cc: linux-stable <stable@vger.kernel.org> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171024152728.4873-1-lionel.g.landwerlin@intel.com (cherry picked from commit 191f896085cf3b5d85920d58a759da4eea141721) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2017-10-25fuse: fix READDIRPLUS skipping an entryMiklos Szeredi
Marios Titas running a Haskell program noticed a problem with fuse's readdirplus: when it is interrupted by a signal, it skips one directory entry. The reason is that fuse erronously updates ctx->pos after a failed dir_emit(). The issue originates from the patch adding readdirplus support. Reported-by: Jakob Unterwurzacher <jakobunt@gmail.com> Tested-by: Marios Titas <redneb@gmx.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Fixes: 0b05b18381ee ("fuse: implement NFS-like readdirplus support") Cc: <stable@vger.kernel.org> # v3.9
2017-10-25perf util: Enable handling of inlined frames by defaultMilian Wolff
Now that we have caches in place to speed up the process of finding inlined frames and srcline information repeatedly, we can enable this useful option by default. Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Milian Wolff <milian.wolff@kdab.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20171019113836.5548-6-milian.wolff@kdab.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-10-25perf report: Use srcline from callchain for hist entriesMilian Wolff
This also removes the symbol name from the srcline column, more on this below. This ensures we use the correct srcline, which could originate from a potentially inlined function. The hist entries used to query for the srcline based purely on the IP, which leads to wrong results for inlined entries. Before: ~~~~~ perf report --inline -s srcline -g none --stdio ... # Children Self Source:Line # ........ ........ .................................................................................................................................. # 94.23% 0.00% __libc_start_main+18446603487898210537 94.23% 0.00% _start+41 44.58% 0.00% main+100 44.58% 0.00% std::_Norm_helper<true>::_S_do_it<double>+100 44.58% 0.00% std::__complex_abs+100 44.58% 0.00% std::abs<double>+100 44.58% 0.00% std::norm<double>+100 36.01% 0.00% hypot+18446603487892193300 25.81% 0.00% main+41 25.81% 0.00% std::__detail::_Adaptor<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul>, double>::operator()+41 25.81% 0.00% std::uniform_real_distribution<double>::operator()<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> >+41 25.75% 25.75% random.h:143 18.39% 0.00% main+57 18.39% 0.00% std::__detail::_Adaptor<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul>, double>::operator()+57 18.39% 0.00% std::uniform_real_distribution<double>::operator()<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> >+57 13.80% 13.80% random.tcc:3330 5.64% 0.00% ??:0 4.13% 4.13% __hypot_finite+163 4.13% 0.00% __hypot_finite+18446603487892193443 ... ~~~~~ After: ~~~~~ perf report --inline -s srcline -g none --stdio ... # Children Self Source:Line # ........ ........ ........................................... # 94.30% 1.19% main.cpp:39 94.23% 0.00% __libc_start_main+18446603487898210537 94.23% 0.00% _start+41 48.44% 1.70% random.h:1823 48.44% 0.00% random.h:1814 46.74% 2.53% random.h:185 44.68% 0.10% complex:589 44.68% 0.00% complex:597 44.68% 0.00% complex:654 44.68% 0.00% complex:664 40.61% 13.80% random.tcc:3330 36.01% 0.00% hypot+18446603487892193300 26.81% 0.00% random.h:151 26.81% 0.00% random.h:332 25.75% 25.75% random.h:143 5.64% 0.00% ??:0 4.13% 4.13% __hypot_finite+163 4.13% 0.00% __hypot_finite+18446603487892193443 ... ~~~~~ Note that this change removes the symbol from the source:line hist column. If this information is desired, users should explicitly query for it if needed. I.e. run this command instead: ~~~~~ perf report --inline -s sym,srcline -g none --stdio ... # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 1K of event 'cycles:uppp' # Event count (approx.): 1381229476 # # Children Self Symbol Source:Line # ........ ........ ................................................................................................................................... ........................................... # 94.30% 1.19% [.] main main.cpp:39 94.23% 0.00% [.] __libc_start_main __libc_start_main+18446603487898210537 94.23% 0.00% [.] _start _start+41 48.44% 0.00% [.] std::uniform_real_distribution<double>::operator()<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> > (inlined) random.h:1814 48.44% 0.00% [.] std::uniform_real_distribution<double>::operator()<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> > (inlined) random.h:1823 46.74% 0.00% [.] std::__detail::_Adaptor<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul>, double>::operator() (inlined) random.h:185 44.68% 0.00% [.] std::_Norm_helper<true>::_S_do_it<double> (inlined) complex:654 44.68% 0.00% [.] std::__complex_abs (inlined) complex:589 44.68% 0.00% [.] std::abs<double> (inlined) complex:597 44.68% 0.00% [.] std::norm<double> (inlined) complex:664 39.80% 13.59% [.] std::generate_canonical<double, 53ul, std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> > random.tcc:3330 36.01% 0.00% [.] hypot hypot+18446603487892193300 26.81% 0.00% [.] std::__detail::__mod<unsigned long, 2147483647ul, 16807ul, 0ul> (inlined) random.h:151 26.81% 0.00% [.] std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul>::operator() (inlined) random.h:332 25.75% 0.00% [.] std::__detail::_Mod<unsigned long, 2147483647ul, 16807ul, 0ul, true, true>::__calc (inlined) random.h:143 25.19% 25.19% [.] std::generate_canonical<double, 53ul, std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> > random.h:143 4.13% 4.13% [.] __hypot_finite __hypot_finite+163 4.13% 0.00% [.] __hypot_finite __hypot_finite+18446603487892193443 ... ~~~~~ Compared to the old behavior, this reduces duplication in the output. Before we used to print the symbol name in the srcline column even when the sym column was explicitly requested. I.e. the output was: ~~~~~ perf report --inline -s sym,srcline -g none --stdio ... # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 1K of event 'cycles:uppp' # Event count (approx.): 1381229476 # # Children Self Symbol Source:Line # ........ ........ ................................................................................................................................... .................................................................................................................................. # 94.23% 0.00% [.] __libc_start_main __libc_start_main+18446603487898210537 94.23% 0.00% [.] _start _start+41 44.58% 0.00% [.] main main+100 44.58% 0.00% [.] std::_Norm_helper<true>::_S_do_it<double> (inlined) std::_Norm_helper<true>::_S_do_it<double>+100 44.58% 0.00% [.] std::__complex_abs (inlined) std::__complex_abs+100 44.58% 0.00% [.] std::abs<double> (inlined) std::abs<double>+100 44.58% 0.00% [.] std::norm<double> (inlined) std::norm<double>+100 36.01% 0.00% [.] hypot hypot+18446603487892193300 25.81% 0.00% [.] main main+41 25.81% 0.00% [.] std::__detail::_Adaptor<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul>, double>::operator() (inlined) std::__detail::_Adaptor<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul>, double>::operator()+41 25.81% 0.00% [.] std::uniform_real_distribution<double>::operator()<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> > (inlined) std::uniform_real_distribution<double>::operator()<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> >+41 25.69% 25.69% [.] std::generate_canonical<double, 53ul, std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> > random.h:143 18.39% 0.00% [.] main main+57 18.39% 0.00% [.] std::__detail::_Adaptor<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul>, double>::operator() (inlined) std::__detail::_Adaptor<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul>, double>::operator()+57 18.39% 0.00% [.] std::uniform_real_distribution<double>::operator()<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> > (inlined) std::uniform_real_distribution<double>::operator()<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> >+57 13.80% 13.80% [.] std::generate_canonical<double, 53ul, std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> > random.tcc:3330 4.13% 4.13% [.] __hypot_finite __hypot_finite+163 4.13% 0.00% [.] __hypot_finite __hypot_finite+18446603487892193443 ... ~~~~~ Signed-off-by: Milian Wolff <milian.wolff@kdab.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20171019113836.5548-5-milian.wolff@kdab.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-10-25perf report: Cache srclines for callchain nodesMilian Wolff
On one hand this ensures that the memory is properly freed when the DSO gets freed. On the other hand this significantly speeds up the processing of the callchain nodes when lots of srclines are requested. For one of my data files e.g.: Before: Performance counter stats for 'perf report -s srcline -g srcline --stdio': 52496.495043 task-clock (msec) # 0.999 CPUs utilized 634 context-switches # 0.012 K/sec 2 cpu-migrations # 0.000 K/sec 191,561 page-faults # 0.004 M/sec 165,074,498,235 cycles # 3.144 GHz 334,170,832,408 instructions # 2.02 insn per cycle 90,220,029,745 branches # 1718.591 M/sec 654,525,177 branch-misses # 0.73% of all branches 52.533273822 seconds time elapsedProcessed 236605 events and lost 40 chunks! After: Performance counter stats for 'perf report -s srcline -g srcline --stdio': 22606.323706 task-clock (msec) # 1.000 CPUs utilized 31 context-switches # 0.001 K/sec 0 cpu-migrations # 0.000 K/sec 185,471 page-faults # 0.008 M/sec 71,188,113,681 cycles # 3.149 GHz 133,204,943,083 instructions # 1.87 insn per cycle 34,886,384,979 branches # 1543.214 M/sec 278,214,495 branch-misses # 0.80% of all branches 22.609857253 seconds time elapsed Note that the difference is only this large when `--inline` is not passed. In such situations, we would use the inliner cache and thus do not run this code path that often. I think that this cache should actually be used in other places, too. When looking at the valgrind leak report for perf report, we see tons of srclines being leaked, most notably from calls to hist_entry__get_srcline. The problem is that get_srcline has many different formatting options (show_sym, show_addr, potentially even unwind_inlines when calling __get_srcline directly). As such, the srcline cannot easily be cached for all calls, or we'd have to add caches for all formatting combinations (6 so far). An alternative would be to remove the formatting options and handle that on a different level - i.e. print the sym/addr on demand wherever we actually output something. And the unwind_inlines could be moved into a separate function that does not return the srcline. Signed-off-by: Milian Wolff <milian.wolff@kdab.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20171019113836.5548-4-milian.wolff@kdab.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-10-25perf report: Cache failed lookups of inlined framesMilian Wolff
When no inlined frames could be found for a given address, we did not store this information anywhere. That means we potentially do the costly inliner lookup repeatedly for cases where we know it can never succeed. This patch makes dso__parse_addr_inlines always return a valid inline_node. It will be empty when no inliners are found. This enables us to cache the empty list in the DSO, thereby improving the performance when many addresses fail to find the inliners. For my trivial example, the performance impact is already quite significant: Before: ~~~~~ Performance counter stats for 'perf report --stdio --inline -g srcline -s srcline' (5 runs): 594.804032 task-clock (msec) # 0.998 CPUs utilized ( +- 0.07% ) 53 context-switches # 0.089 K/sec ( +- 4.09% ) 0 cpu-migrations # 0.000 K/sec ( +-100.00% ) 5,687 page-faults # 0.010 M/sec ( +- 0.02% ) 2,300,918,213 cycles # 3.868 GHz ( +- 0.09% ) 4,395,839,080 instructions # 1.91 insn per cycle ( +- 0.00% ) 939,177,205 branches # 1578.969 M/sec ( +- 0.00% ) 11,824,633 branch-misses # 1.26% of all branches ( +- 0.10% ) 0.596246531 seconds time elapsed ( +- 0.07% ) ~~~~~ After: ~~~~~ Performance counter stats for 'perf report --stdio --inline -g srcline -s srcline' (5 runs): 113.111405 task-clock (msec) # 0.990 CPUs utilized ( +- 0.89% ) 29 context-switches # 0.255 K/sec ( +- 54.25% ) 0 cpu-migrations # 0.000 K/sec 5,380 page-faults # 0.048 M/sec ( +- 0.01% ) 432,378,779 cycles # 3.823 GHz ( +- 0.75% ) 670,057,633 instructions # 1.55 insn per cycle ( +- 0.01% ) 141,001,247 branches # 1246.570 M/sec ( +- 0.01% ) 2,346,845 branch-misses # 1.66% of all branches ( +- 0.19% ) 0.114222393 seconds time elapsed ( +- 1.19% ) ~~~~~ Signed-off-by: Milian Wolff <milian.wolff@kdab.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20171019113836.5548-3-milian.wolff@kdab.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-10-25perf report: Properly handle branch count in match_chain()Milian Wolff
Some of the code paths I introduced before returned too early without running the code to handle a node's branch count. By refactoring match_chain to only have one exit point, this can be remedied. Signed-off-by: Milian Wolff <milian.wolff@kdab.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1707691.qaJ269GSZW@agathebauer Link: http://lkml.kernel.org/r/20171018185350.14893-2-milian.wolff@kdab.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-10-25drm/amd/amdgpu: Remove workaround check for UVD6 on APUsTom St Denis
On APUs the uvd6 driver was skipping proper suspend/resume routines resulting in a broken state upon resume. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-10-25netfilter: nft_set_hash: disable fast_ops for 2-len keysAnatole Denis
jhash_1word of a u16 is a different value from jhash of the same u16 with length 2. Since elements are always inserted in sets using jhash over the actual klen, this would lead to incorrect lookups on fixed-size sets with a key length of 2, as they would be inserted with hash value jhash(key, 2) and looked up with hash value jhash_1word(key), which is different. Example reproducer(v4.13+), using anonymous sets which always have a fixed size: table inet t { chain c { type filter hook output priority 0; policy accept; tcp dport { 10001, 10003, 10005, 10007, 10009 } counter packets 4 bytes 240 reject tcp dport 10001 counter packets 4 bytes 240 reject tcp dport 10003 counter packets 4 bytes 240 reject tcp dport 10005 counter packets 4 bytes 240 reject tcp dport 10007 counter packets 0 bytes 0 reject tcp dport 10009 counter packets 4 bytes 240 reject } } then use nc -z localhost <port> to probe; incorrectly hashed ports will pass through the set lookup and increment the counter of an individual rule. jhash being seeded with a random value, it is not deterministic which ports will incorrectly hash, but in testing with 5 ports in the set I always had 4 or 5 with an incorrect hash value. Signed-off-by: Anatole Denis <anatole@rezel.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-10-25scsi: hisi_sas: use array for v2 hw AXI errorsShiju Jose
The code to print AXI errors in v2 hw driver is repetitive. This patch condenses the code by looping an array of errors. Also, a formatting error in one_bit_ecc_errors[] and multi_bit_ecc_errors[] is fixed. Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-25scsi: hisi_sas: fix the risk of freeing slot twiceXiaofei Tan
The function hisi_sas_slot_task_free() is used to free the slot and do tidy-up of LLDD resources. The LLDD generally should know the state of a slot and decide when to free it, and it should only be done once. For some scenarios, we really don't know the state, like when TMF timeout. In this case, we check task->lldd_task before calling hisi_sas_slot_task_free(). However, we may miss some scenarios when we should also check task->lldd_task, and it is not SMP safe to check task->lldd_task as we don't protect it within spin lock. This patch is to fix this risk of freeing slot twice, as follows: 1. Check task->lldd_task in the hisi_sas_slot_task_free(), and give up freeing of this time if task->lldd_task is NULL. 2. Set slot->buf to NULL after it is freed. Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-25scsi: hisi_sas: fix NULL check in SMP abort task pathXiaofei Tan
This patch adds a NULL check of task->lldd_task before freeing the slot in SMP path. This is to guard against the scenario of the slot being freed during the from the preceding internal abort. Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-25scsi: hisi_sas: us start_phy in PHY_FUNC_LINK_RESETXiang Chen
When a PHY_FUNC_LINK_RESET is issued, we need to fill the transport identify_frame to SAS controller before the PHYs are enabled. Without this, we may find that if a PHY which belonged to a wideport before the reset may generate a new port id. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-25scsi: hisi_sas: fix SATA breakpoint memory sizeXiang Chen
Currently the size of memory we allocate for SATA breakpoint buffer is incorrect. The breakpoint memory size should be as follows: 32 (NCQ tags) * 128 * 2048 (max #devs) = 8MB Currently we only allocate 0.5MB, but get away with it as we never have SATA device index > 128 typically. To conserve precious DMA memory (8MB may not be even available), limit the number of devices per HBA to 1024, which means 4MB of memory required for SATA breakpoint. The 1024 device limit applied to all HW versions. For v3 hw, we need to configure this value. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-25scsi: hisi_sas: grab hisi_hba.lock when processing slotsXiang Chen
When adding/removing slots from device list, we need to lock this operation with hisi_hba lock for safety. This patch adds missing instances of this. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-25scsi: hisi_sas: use spin_lock_irqsave() for hisi_hba.lockXiaofei Tan
We used spin_lock() to grab hisi_hba.lock in two places where spin_lock_irqsave() should be used, as hisi_hba.lock can be taken in interrupt context. This patch is to fix this. Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-25scsi: hisi_sas: fix internal abort slot timeout bugXiang Chen
When an internal abort times out in hisi_sas_internal_task_abort(), goto the exit label in and not go through the other task status checks. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-25scsi: hisi_sas: delete get_ncq_tag_v3_hw()Xiang Chen
We already relocated hisi_sas_get_ncq_tag() into common file main.c, so delete get_ncq_tag_v3_hw() and use hisi_sas_get_ncq_tag() instead. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-25Merge remote-tracking branches 'spi/fix/armada', 'spi/fix/idr', ↵Mark Brown
'spi/fix/qspi', 'spi/fix/stm32' and 'spi/fix/uapi' into spi-linus
2017-10-25ASoC: Intel: Skylake: Decrease loglevel for topology loadingChintan Patel
In case of failure in loading customize topology firmware, dfw_sst.bin gets loaded. However, current log provides this message as error even after successfully falling back to default topology "dfw_sst.bin". Hence to convey proper message, changing log level and message. Signed-off-by: Chintan Patel <chintan.m.patel@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-10-25spi: sprd: Fix the possible negative value of BIT()Baolin Wang
When enabling the ADI hardware channels, if the channel id is 31, then we will get one negative value -1 for BIT() macro, which will write incorrect value to register. Fixes: 7e2903cb91df ("spi: Add ADI driver for Spreadtrum platform") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-10-25powerpc: Fix check for copy/paste instructions in alignment handlerPaul Mackerras
Commit 07d2a628bc00 ("powerpc/64s: Avoid cpabort in context switch when possible", 2017-06-09) changed the definition of PPC_INST_COPY and in so doing inadvertently broke the check for copy/paste instructions in the alignment fault handler. The check currently matches no instructions. This fixes it by ANDing both sides of the comparison with the mask. Fixes: 07d2a628bc00 ("powerpc/64s: Avoid cpabort in context switch when possible") Cc: stable@vger.kernel.org # v4.13+ Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-25powerpc/perf: Fix IMC allocation routineGuilherme G. Piccoli
When setting nr_cpus=1, we observed a crash in IMC code during boot due to a missing allocation: basically, IMC code is taking the number of threads into account in imc_mem_init() and if we manually set nr_cpus for a value that is not multiple of the number of threads per core, an integer division in that function will discard the decimal portion, leading IMC to not allocate one mem_info struct. This causes a NULL pointer dereference later, on is_core_imc_mem_inited(). This patch just rounds that division up, fixing the bug. Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Acked-by: Anju T Sudhakar <anju@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-25workqueue: Remove now redundant lock acquisitions wrt. workqueue flushesByungchul Park
The workqueue code added manual lock acquisition annotations to catch deadlocks. After lockdepcrossrelease was introduced, some of those became redundant, since wait_for_completion() already does the acquisition and tracking. Remove the duplicate annotations. Signed-off-by: Byungchul Park <byungchul.park@lge.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: amir73il@gmail.com Cc: axboe@kernel.dk Cc: darrick.wong@oracle.com Cc: david@fromorbit.com Cc: hch@infradead.org Cc: idryomov@gmail.com Cc: johan@kernel.org Cc: johannes.berg@intel.com Cc: kernel-team@lge.com Cc: linux-block@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Cc: linux-mm@kvack.org Cc: linux-xfs@vger.kernel.org Cc: oleg@redhat.com Cc: tj@kernel.org Link: http://lkml.kernel.org/r/1508921765-15396-9-git-send-email-byungchul.park@lge.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-25sched/completions: Add support for initializing completions with lockdep_mapByungchul Park
Sometimes we want to initialize completions with sparate lockdep maps to assign lock classes as desired. For example, the workqueue code needs to directly manage lockdep maps, since only the code is aware of how to classify lockdep maps properly. Provide additional macros initializing completions in that way. Signed-off-by: Byungchul Park <byungchul.park@lge.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: amir73il@gmail.com Cc: axboe@kernel.dk Cc: darrick.wong@oracle.com Cc: david@fromorbit.com Cc: hch@infradead.org Cc: idryomov@gmail.com Cc: johan@kernel.org Cc: johannes.berg@intel.com Cc: kernel-team@lge.com Cc: linux-block@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Cc: linux-mm@kvack.org Cc: linux-xfs@vger.kernel.org Cc: oleg@redhat.com Cc: tj@kernel.org Link: http://lkml.kernel.org/r/1508921765-15396-8-git-send-email-byungchul.park@lge.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-25locking/lockdep: Introduce CONFIG_BOOTPARAM_LOCKDEP_CROSSRELEASE_FULLSTACK=yByungchul Park
Add a Kconfig knob that enables the lockdep "crossrelease_fullstack" boot parameter. Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Byungchul Park <byungchul.park@lge.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: amir73il@gmail.com Cc: axboe@kernel.dk Cc: darrick.wong@oracle.com Cc: david@fromorbit.com Cc: hch@infradead.org Cc: idryomov@gmail.com Cc: johan@kernel.org Cc: johannes.berg@intel.com Cc: kernel-team@lge.com Cc: linux-block@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Cc: linux-mm@kvack.org Cc: linux-xfs@vger.kernel.org Cc: oleg@redhat.com Cc: tj@kernel.org Link: http://lkml.kernel.org/r/1508921765-15396-7-git-send-email-byungchul.park@lge.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-25locking/lockdep: Remove the BROKEN flag from CONFIG_LOCKDEP_CROSSRELEASE and ↵Byungchul Park
CONFIG_LOCKDEP_COMPLETIONS Now that the performance regression is fixed, re-enable CONFIG_LOCKDEP_CROSSRELEASE=y and CONFIG_LOCKDEP_COMPLETIONS=y. Signed-off-by: Byungchul Park <byungchul.park@lge.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: amir73il@gmail.com Cc: axboe@kernel.dk Cc: darrick.wong@oracle.com Cc: david@fromorbit.com Cc: hch@infradead.org Cc: idryomov@gmail.com Cc: johan@kernel.org Cc: johannes.berg@intel.com Cc: kernel-team@lge.com Cc: linux-block@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Cc: linux-mm@kvack.org Cc: linux-xfs@vger.kernel.org Cc: oleg@redhat.com Cc: tj@kernel.org Link: http://lkml.kernel.org/r/1508921765-15396-6-git-send-email-byungchul.park@lge.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-25locking/lockdep: Add a boot parameter allowing unwind in cross-release and ↵Byungchul Park
disable it by default Johan Hovold reported a heavy performance regression caused by lockdep cross-release: > Boot time (from "Linux version" to login prompt) had in fact doubled > since 4.13 where it took 17 seconds (with my current config) compared to > the 35 seconds I now see with 4.14-rc4. > > I quick bisect pointed to lockdep and specifically the following commit: > > 28a903f63ec0 ("locking/lockdep: Handle non(or multi)-acquisition > of a crosslock") > > which I've verified is the commit which doubled the boot time (compared > to 28a903f63ec0^) (added by lockdep crossrelease series [1]). Currently cross-release performs unwind on every acquisition, but that is very expensive. This patch makes unwind optional and disables it by default and only records acquire_ip. Full stack traces are sometimes required for full analysis, in which case a boot paramter, crossrelease_fullstack, can be specified. On my qemu Ubuntu machine (x86_64, 4 cores, 512M), the regression was fixed. We measure boot times with 'perf stat --null --repeat 10 $QEMU', where $QEMU launches a kernel with init=/bin/true: 1. No lockdep enabled: Performance counter stats for 'qemu_booting_time.sh bzImage' (10 runs): 2.756558155 seconds time elapsed ( +- 0.09% ) 2. Lockdep enabled: Performance counter stats for 'qemu_booting_time.sh bzImage' (10 runs): 2.968710420 seconds time elapsed ( +- 0.12% ) 3. Lockdep enabled + cross-release enabled: Performance counter stats for 'qemu_booting_time.sh bzImage' (10 runs): 3.153839636 seconds time elapsed ( +- 0.31% ) 4. Lockdep enabled + cross-release enabled + this patch applied: Performance counter stats for 'qemu_booting_time.sh bzImage' (10 runs): 2.963669551 seconds time elapsed ( +- 0.11% ) I.e. lockdep cross-release performance is now indistinguishable from vanilla lockdep. Bisected-by: Johan Hovold <johan@kernel.org> Analyzed-by: Thomas Gleixner <tglx@linutronix.de> Suggested-by: Thomas Gleixner <tglx@linutronix.de> Reported-by: Johan Hovold <johan@kernel.org> Signed-off-by: Byungchul Park <byungchul.park@lge.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: amir73il@gmail.com Cc: axboe@kernel.dk Cc: darrick.wong@oracle.com Cc: david@fromorbit.com Cc: hch@infradead.org Cc: idryomov@gmail.com Cc: johannes.berg@intel.com Cc: kernel-team@lge.com Cc: linux-block@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Cc: linux-mm@kvack.org Cc: linux-xfs@vger.kernel.org Cc: oleg@redhat.com Cc: tj@kernel.org Link: http://lkml.kernel.org/r/1508921765-15396-5-git-send-email-byungchul.park@lge.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-25locking/lockdep, sched/completions: Change the prefix of lock name for ↵Byungchul Park
completion variables CONFIG_LOCKDEP_COMPLETIONS uses "(complete)" as a prefix of lock name for completion variable. However, what we should use here is a noun - so use "(completion)" instead. Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Byungchul Park <byungchul.park@lge.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: amir73il@gmail.com Cc: axboe@kernel.dk Cc: darrick.wong@oracle.com Cc: david@fromorbit.com Cc: hch@infradead.org Cc: idryomov@gmail.com Cc: johan@kernel.org Cc: johannes.berg@intel.com Cc: kernel-team@lge.com Cc: linux-block@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Cc: linux-mm@kvack.org Cc: linux-xfs@vger.kernel.org Cc: oleg@redhat.com Cc: tj@kernel.org Link: http://lkml.kernel.org/r/1508921765-15396-4-git-send-email-byungchul.park@lge.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-25locking/lockdep: Provide empty lockdep_map structure for !CONFIG_LOCKDEPByungchul Park
After this patch the lockdep_map structure takes no space if lockdep is disabled, reducing the number of #ifdefs in unrelated kernel code. Signed-off-by: Byungchul Park <byungchul.park@lge.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: amir73il@gmail.com Cc: axboe@kernel.dk Cc: darrick.wong@oracle.com Cc: david@fromorbit.com Cc: hch@infradead.org Cc: idryomov@gmail.com Cc: johan@kernel.org Cc: johannes.berg@intel.com Cc: kernel-team@lge.com Cc: linux-block@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Cc: linux-mm@kvack.org Cc: linux-xfs@vger.kernel.org Cc: oleg@redhat.com Cc: tj@kernel.org Link: http://lkml.kernel.org/r/1508921765-15396-3-git-send-email-byungchul.park@lge.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-25block: Use DECLARE_COMPLETION_ONSTACK() in submit_bio_wait()Christoph Hellwig
Simplify the code by getting rid of the submit_bio_ret structure. (This also helps address a lockdep false positive.) Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: amir73il@gmail.com Cc: axboe@kernel.dk Cc: darrick.wong@oracle.com Cc: david@fromorbit.com Cc: hch@infradead.org Cc: idryomov@gmail.com Cc: johan@kernel.org Cc: johannes.berg@intel.com Cc: kernel-team@lge.com Cc: linux-block@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Cc: linux-mm@kvack.org Cc: linux-xfs@vger.kernel.org Cc: oleg@redhat.com Cc: tj@kernel.org Link: http://lkml.kernel.org/r/1508921765-15396-2-git-send-email-byungchul.park@lge.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-25efi/libstub/arm: Don't randomize runtime regions when CONFIG_HIBERNATION=yArd Biesheuvel
Commit: e69176d68d26 ("ef/libstub/arm/arm64: Randomize the base of the UEFI rt services region") implemented randomization of the virtual mapping that the OS chooses for the UEFI runtime services. This was motivated by the fact that UEFI usually does not bother to specify any permission restrictions for those regions, making them prime real estate for exploitation now that the OS is getting more and more careful not to leave any R+W+X mapped regions lying around. However, this randomization breaks assumptions in the resume from hibernation code, which expects all memory regions populated by UEFI to remain in the same place, including their virtual mapping into the OS memory space. While this assumption may not be entirely reasonable in the first place, breaking it deliberately does not make a lot of sense either. So let's refrain from this randomization pass if CONFIG_HIBERNATION=y. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: James Morse <james.morse@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20171025100448.26056-3-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-25efi/efi_test: Prevent an Oops in efi_runtime_query_capsulecaps()Dan Carpenter
If "qcaps.capsule_count" is ULONG_MAX then "qcaps.capsule_count + 1" will overflow to zero and kcalloc() will return the ZERO_SIZE_PTR. We try to dereference it inside the loop and crash. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Ivan Hu <ivan.hu@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Fixes: ff6301dabc3c ("efi: Add efi_test driver for exporting UEFI runtime service interfaces") Link: http://lkml.kernel.org/r/20171025100448.26056-2-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-25scsi: scsi_devinfo: Add scsi_devinfo_tbl.cJeffy Chen
Add generated scsi_devinfo_tbl.c into .gitignore. Fixes: 345e29608b4b ("scsi: scsi: Export blacklist flags to sysfs") Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-25gpio: mmio: Make pin2mask() a private businessLinus Walleij
The vtable call pin2mask() was introducing a vtable function call in every gpiochip callback for a generic MMIO GPIO chip. This was not exactly efficient. (Maybe link-time optimization could get rid of it, I don't know.) After removing all external calls into this API we can make it a boolean flag in the struct gpio_chip call and sink the function into the gpio-mmio driver yielding encapsulation and potential speedups. Cc: Anton Vorontsov <anton@enomsg.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-25gpio: mpc8xxx: Do not reverse bits using bgpioLinus Walleij
The MPC8xxx driver is always instantiating its generic GPIO functions with the flag BGPIOF_BIG_ENDIAN. This means "big-endian bit order" and means the bits representing the GPIO lines in the registers are reversed around 31 bits so line 0 is at bit 31 and so forth down to line 31 in bit 0. Instead of looping into the generic MMIO gpio to do the simple calculation of a bitmask, through a vtable call with two parameters likely using stack frames etc (unless the compiler optimize it) and obscuring the view for the programmer, let's just open-code what the call does. This likely executes faster, saves space and makes the code easier to read. Cc: Liu Gang <Gang.Liu@nxp.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-25gpio: brcmstb: Do not use gc->pin2mask()Linus Walleij
The pin2mask() accessor only shuffles BIT ORDER in big endian systems, i.e. the bitstuffing is swizzled big endian so "bit 0" is bit 7 or bit 15 or bit 31 or so. The brcmstb only uses big endian BYTE ORDER which will be taken car of by the ->write_reg() callback. Just use BIT(offset) to assign the bit. Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-22 21:39:14 +0000