| Age | Commit message (Collapse) | Author |
|---|
|
The code flow for first time attaching a PT and replacing a PT is very
similar except for the lowest do_attach step.
Reorganize this so that the do_attach step is a function pointer.
Replace requires destroying the old HWPT once it is replaced. This
destruction cannot be done under all the locks that are held in the
function pointer, so the signature allows returning a HWPT which will be
destroyed by the caller after everything is unlocked.
Link: https://lore.kernel.org/r/12-v8-6659224517ea+532-iommufd_alloc_jgg@nvidia.com
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Due to the auto_domains mechanism the ioas->mutex must be held until
the hwpt is completely setup by iommufd_object_abort_and_destroy() or
iommufd_object_finalize().
This prevents a concurrent iommufd_device_auto_get_domain() from seeing
an incompletely initialized object through the ioas->hwpt_list.
To make this more consistent move the unlock until after finalize.
Fixes: e8d57210035b ("iommufd: Add kAPI toward external drivers for physical devices")
Link: https://lore.kernel.org/r/11-v8-6659224517ea+532-iommufd_alloc_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
During creation the hwpt must have the ioas->mutex held until the object
is finalized. This means we need to be able to call
iommufd_object_abort_and_destroy() while holding the mutex.
Since iommufd_hw_pagetable_destroy() also needs the mutex this is
problematic.
Fix it by creating a special abort op for the object that can assume the
caller is holding the lock, as required by the contract.
The next patch will add another iommufd_object_abort_and_destroy() for a
hwpt.
Fixes: e8d57210035b ("iommufd: Add kAPI toward external drivers for physical devices")
Link: https://lore.kernel.org/r/10-v8-6659224517ea+532-iommufd_alloc_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Logically the HWPT should have the coherency set properly for the device
that it is being created for when it is created.
This was happening implicitly if the immediate_attach was set because
iommufd_hw_pagetable_attach() does it as the first thing.
Do it unconditionally so !immediate_attach works properly.
Link: https://lore.kernel.org/r/9-v8-6659224517ea+532-iommufd_alloc_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Next patch will need to call this from two places.
Link: https://lore.kernel.org/r/8-v8-6659224517ea+532-iommufd_alloc_jgg@nvidia.com
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The sw_msi_start is only set by the ARM drivers and it is always constant.
Due to the way vfio/iommufd allow domains to be re-used between
devices we have a built in assumption that there is only one value
for sw_msi_start and it is global to the system.
To make replace simpler where we may not reparse the
iommu_get_resv_regions() move the sw_msi_start to the iommufd_group so it
is always available once any HWPT has been attached.
Link: https://lore.kernel.org/r/7-v8-6659224517ea+532-iommufd_alloc_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
This only needs to be done once per group, not once per device. The once
per device was a way to make the device list work. Since we are abandoning
this we can optimize things a bit.
Link: https://lore.kernel.org/r/6-v8-6659224517ea+532-iommufd_alloc_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The driver facing API in the iommu core makes the reserved regions
per-device. An algorithm in the core code consolidates the regions of all
the devices in a group to return the group view.
To allow for devices to be hotplugged into the group iommufd would re-load
the entire group's reserved regions for each device, just in case they
changed.
Further iommufd already has to deal with duplicated/overlapping reserved
regions as it must union all the groups together.
Thus simplify all of this to just use the device reserved regions
interface directly from the iommu driver.
Link: https://lore.kernel.org/r/5-v8-6659224517ea+532-iommufd_alloc_jgg@nvidia.com
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
iommufd wants to use this in the next patch. For some reason the
iommu_put_resv_regions() was already exported.
Link: https://lore.kernel.org/r/4-v8-6659224517ea+532-iommufd_alloc_jgg@nvidia.com
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The devices list was used as a simple way to avoid having per-group
information. Now that this seems to be unavoidable, just commit to
per-group information fully and remove the devices list from the HWPT.
The iommufd_group stores the currently assigned HWPT for the entire group
and we can manage the per-device attach/detach with a list in the
iommufd_group.
For destruction the flow is organized to make the following patches
easier, the actual call to iommufd_object_destroy_user() is done at the
top of the call chain without holding any locks. The HWPT to be destroyed
is returned out from the locked region to make this possible. Later
patches create locking that requires this.
Link: https://lore.kernel.org/r/3-v8-6659224517ea+532-iommufd_alloc_jgg@nvidia.com
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
When the hwpt to device attachment is fairly static we could get away with
the simple approach of keeping track of the groups via a device list. But
with replace this is infeasible.
Add an automatically managed struct that is 1:1 with the iommu_group
per-ictx so we can store the necessary tracking information there.
Link: https://lore.kernel.org/r/2-v8-6659224517ea+532-iommufd_alloc_jgg@nvidia.com
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
With the recent rework this no longer needs to be done at domain
attachment time, we know if the device is usable by iommufd when we bind
it.
The value of msi_device_has_isolated_msi() is not allowed to change while
a driver is bound.
Link: https://lore.kernel.org/r/1-v8-6659224517ea+532-iommufd_alloc_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
An attempt to acquire exclusive lock can race with the current lock
owner closing the image:
1. lock is held by client123, rbd_lock() returns -EBUSY
2. get_lock_owner_info() returns client123 instance details
3. client123 closes the image, lock is released
4. find_watcher() returns 0 as there is no matching watcher anymore
5. client123 instance gets erroneously blocklisted
Particularly impacted is mirror snapshot scheduler in snapshot-based
mirroring since it happens to open and close images a lot (images are
opened only for as long as it takes to take the next mirror snapshot,
the same client instance is used for all images).
To reduce the potential for erroneous blocklisting, retrieve the lock
owner again after find_watcher() returns 0. If it's still there, make
sure it matches the previously detected lock owner.
Cc: stable@vger.kernel.org # f38cb9d9c204: rbd: make get_lock_owner_info() return a single locker or NULL
Cc: stable@vger.kernel.org # 8ff2c64c9765: rbd: harden get_lock_owner_info() a bit
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
|
|
- we want the exclusive lock type, so test for it directly
- use sscanf() to actually parse the lock cookie and avoid admitting
invalid handles
- bail if locker has a blank address
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
|
|
Make the "num_lockers can be only 0 or 1" assumption explicit and
simplify the API by getting rid of output parameters in preparation
for calling get_lock_owner_info() twice before blocklisting.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
|
|
iommufd for-next
Shared branch with VFIO containing the enablement for VFIO "cdev"
devices. This is required by following iommufd patches which add new
ioctls to the VFIO cdev.
=======
Existing VFIO provides group-centric user APIs for userspace. Userspace
opens the /dev/vfio/$group_id first before getting device fd and hence
getting access to device. This is not the desired model for iommufd. Per
the conclusion of community discussion[1], iommufd provides device-centric
kAPIs and requires its consumer (like VFIO) to be device-centric user
APIs. Such user APIs are used to associate device with iommufd and also
the I/O address spaces managed by the iommufd.
This series first introduces a per device file structure to be prepared
for further enhancement and refactors the kvm-vfio code to be prepared
for accepting device file from userspace. After this, adds a mechanism for
blocking device access before iommufd bind. Then refactors the vfio to be
able to handle cdev paths (e.g. iommufd binding, no-iommufd, [de]attach ioas).
This refactor includes making the device_open exclusive between the group
and the cdev path, only allow single device open in cdev path; vfio-iommufd
code is also refactored to support cdev. e.g. split the vfio_iommufd_bind()
into two steps. Eventually, adds the cdev support for vfio device and the
new ioctls, then makes group infrastructure optional as it is not needed
when vfio device cdev is compiled.
This series is based on some preparation works done to vfio emulated devices[2]
and vfio pci hot reset enhancements[3]. Per discussion[4], this series does not
support cdev for physical devices that do not have IOMMU. Such devices only
have group-centric user APIs.
This series is a prerequisite for iommu nesting for vfio device[5] [6].
[1] https://lore.kernel.org/kvm/BN9PR11MB5433B1E4AE5B0480369F97178C189@BN9PR11MB5433.namprd11.prod.outlook.com/
[2] https://lore.kernel.org/kvm/20230327093351.44505-1-yi.l.liu@intel.com/ - merged
[3] https://lore.kernel.org/kvm/20230718105542.4138-1-yi.l.liu@intel.com/
[4] https://lore.kernel.org/kvm/20230525095939.37ddb8ce.alex.williamson@redhat.com/
[5] https://lore.kernel.org/linux-iommu/20230511143844.22693-1-yi.l.liu@intel.com/
[6] https://lore.kernel.org/linux-iommu/20230511145110.27707-1-yi.l.liu@intel.com/#t
=======
* 'v6.6/vfio/cdev' of https://github.com/awilliam/linux-vfio: (36 commits)
docs: vfio: Add vfio device cdev description
vfio: Compile vfio_group infrastructure optionally
vfio: Move the IOMMU_CAP_CACHE_COHERENCY check in __vfio_register_dev()
vfio: Add VFIO_DEVICE_[AT|DE]TACH_IOMMUFD_PT
vfio: Add VFIO_DEVICE_BIND_IOMMUFD
vfio: Avoid repeated user pointer cast in vfio_device_fops_unl_ioctl()
iommufd: Add iommufd_ctx_from_fd()
vfio: Test kvm pointer in _vfio_device_get_kvm_safe()
vfio: Add cdev for vfio_device
vfio: Move device_del() before waiting for the last vfio_device registration refcount
vfio: Move vfio_device_group_unregister() to be the first operation in unregister
vfio-iommufd: Add detach_ioas support for emulated VFIO devices
iommufd/device: Add iommufd_access_detach() API
vfio-iommufd: Add detach_ioas support for physical VFIO devices
vfio: Record devid in vfio_device_file
vfio-iommufd: Split bind/attach into two steps
vfio-iommufd: Move noiommu compat validation out of vfio_iommufd_bind()
vfio: Make vfio_df_open() single open for device cdev path
vfio: Add cdev_device_open_cnt to vfio_group
vfio: Block device access via device fd until device is opened
vfio: Pass struct vfio_device_file * to vfio_device_open/close()
kvm/vfio: Accept vfio device file from userspace
kvm/vfio: Prepare for accepting vfio device fd
vfio: Accept vfio device file in the KVM facing kAPI
vfio: Refine vfio file kAPIs for KVM
vfio: Allocate per device file structure
vfio/pci: Allow passing zero-length fd array in VFIO_DEVICE_PCI_HOT_RESET
vfio/pci: Copy hot-reset device info to userspace in the devices loop
vfio/pci: Extend VFIO_DEVICE_GET_PCI_HOT_RESET_INFO for vfio device cdev
vfio: Add helper to search vfio_device in a dev_set
...
|
|
Report the correct WC error if a MW bind is performed
on an already valid/bound window.
Fixes: 44d9e52977a1 ("RDMA/irdma: Implement device initialization definitions")
Signed-off-by: Sindhu Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20230725155439.1057-2-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The op_type field CQ poll info structure is incorrectly
filled in with the queue type as opposed to the op_type
received in the CQEs. The wrong opcode could be decoded
and returned to the ULP.
Copy the op_type field received in the CQE in the CQ poll
info structure.
Fixes: 24419777e943 ("RDMA/irdma: Fix RQ completion opcode")
Signed-off-by: Sindhu Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20230725155439.1057-1-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
btrfs_attach_transaction_barrier() is used to get a handle pointing to the
current running transaction if the transaction has not started its commit
yet (its state is < TRANS_STATE_COMMIT_START). If the transaction commit
has started, then we wait for the transaction to commit and finish before
returning - however we completely ignore if the transaction was aborted
due to some error during its commit, we simply return ERR_PT(-ENOENT),
which makes the caller assume everything is fine and no errors happened.
This could make an fsync return success (0) to user space when in fact we
had a transaction abort and the target inode changes were therefore not
persisted.
Fix this by checking for the return value from btrfs_wait_for_commit(),
and if it returned an error, return it back to the caller.
Fixes: d4edf39bd5db ("Btrfs: fix uncompleted transaction")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In the patch ("spi: spi-qcom-qspi: Fallback to PIO for xfers that
aren't multiples of 4 bytes") we detect reads that we can't handle
properly and fallback to PIO mode. While that's correct behavior, we
can do better by adding "spi_controller_mem_ops" for our
controller. Once we do this then the caller will give us a transfer
that's a multiple of 4-bytes so we can DMA.
Fixes: b5762d95607e ("spi: spi-qcom-qspi: Add DMA mode support")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>
Link: https://lore.kernel.org/r/20230725110226.2.Id4a39804e01e4a06dae9b73fd2a5194c4c7ea453@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The Qualcomm QSPI driver appears to require that any reads using DMA
are a mutliple of 4 bytes. If this isn't true then the controller will
clobber any extra bytes in memory following the last word. Let's
detect this and falback to PIO.
This fixes problems reported by slub_debug=FZPUA, which would complain
about "kmalloc Redzone overwritten". One such instance said:
0xffffff80c29d541a-0xffffff80c29d541b @offset=21530. First byte 0x0 instead of 0xcc
Allocated in mtd_kmalloc_up_to+0x98/0xac age=36 cpu=3 pid=6658
Tracing through what was happening I saw that, while we often did DMA
tranfers of 0x1000 bytes, sometimes we'd end up doing ones of 0x41a
bytes. Those 0x41a byte transfers were the problem.
NOTE: a future change will enable the SPI "mem ops" to help avoid this
case, but it still seems good to add the extra check in the transfer.
Fixes: b5762d95607e ("spi: spi-qcom-qspi: Add DMA mode support")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230725110226.1.Ia2f980fc7cd0b831e633391f0bb1272914d8f381@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The Xeon validation group has been carrying out some loaded tests
with various HW configurations, and they have seen some transmit
queue time out happening during the test. This will cause the
reset adapter function to be called by igc_tx_timeout().
Similar race conditions may arise when the interface is being brought
down and up in igc_reinit_locked(), an interrupt being generated, and
igc_clean_tx_irq() being called to complete the TX.
When the igc_tx_timeout() function is invoked, this patch will turn
off all TX ring HW queues during igc_down() process. TX ring HW queues
will be activated again during the igc_configure_tx_ring() process
when performing the igc_up() procedure later.
This patch also moved existing igc_disable_tx_ring_hw() to avoid using
forward declaration.
Kernel trace:
[ 7678.747813] ------------[ cut here ]------------
[ 7678.757914] NETDEV WATCHDOG: enp1s0 (igc): transmit queue 2 timed out
[ 7678.770117] WARNING: CPU: 0 PID: 13 at net/sched/sch_generic.c:525 dev_watchdog+0x1ae/0x1f0
[ 7678.784459] Modules linked in: xt_conntrack nft_chain_nat xt_MASQUERADE xt_addrtype nft_compat
nf_tables nfnetlink br_netfilter bridge stp llc overlay dm_mod emrcha(PO) emriio(PO) rktpm(PO)
cegbuf_mod(PO) patch_update(PO) se(PO) sgx_tgts(PO) mktme(PO) keylocker(PO) svtdx(PO) svfs_pci_hotplug(PO)
vtd_mod(PO) davemem(PO) svmabort(PO) svindexio(PO) usbx2(PO) ehci_sched(PO) svheartbeat(PO) ioapic(PO)
sv8259(PO) svintr(PO) lt(PO) pcierootport(PO) enginefw_mod(PO) ata(PO) smbus(PO) spiflash_cdf(PO) arden(PO)
dsa_iax(PO) oobmsm_punit(PO) cpm(PO) svkdb(PO) ebg_pch(PO) pch(PO) sviotargets(PO) svbdf(PO) svmem(PO)
svbios(PO) dram(PO) svtsc(PO) targets(PO) superio(PO) svkernel(PO) cswitch(PO) mcf(PO) pentiumIII_mod(PO)
fs_svfs(PO) mdevdefdb(PO) svfs_os_services(O) ixgbe mdio mdio_devres libphy emeraldrapids_svdefs(PO)
regsupport(O) libnvdimm nls_cp437 snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel
snd_intel_dspcfg snd_hda_codec snd_hwdep x86_pkg_temp_thermal snd_hda_core snd_pcm snd_timer isst_if_mbox_pci
[ 7678.784496] input_leds isst_if_mmio sg snd isst_if_common soundcore wmi button sad9(O) drm fuse backlight
configfs efivarfs ip_tables x_tables vmd sdhci led_class rtl8150 r8152 hid_generic pegasus mmc_block usbhid
mmc_core hid megaraid_sas ixgb igb i2c_algo_bit ice i40e hpsa scsi_transport_sas e1000e e1000 e100 ax88179_178a
usbnet xhci_pci sd_mod xhci_hcd t10_pi crc32c_intel crc64_rocksoft igc crc64 crc_t10dif usbcore
crct10dif_generic ptp crct10dif_common usb_common pps_core
[ 7679.200403] RIP: 0010:dev_watchdog+0x1ae/0x1f0
[ 7679.210201] Code: 28 e9 53 ff ff ff 4c 89 e7 c6 05 06 42 b9 00 01 e8 17 d1 fb ff 44 89 e9 4c
89 e6 48 c7 c7 40 ad fb 81 48 89 c2 e8 52 62 82 ff <0f> 0b e9 72 ff ff ff 65 8b 05 80 7d 7c 7e
89 c0 48 0f a3 05 0a c1
[ 7679.245438] RSP: 0018:ffa00000001f7d90 EFLAGS: 00010282
[ 7679.256021] RAX: 0000000000000000 RBX: ff11000109938440 RCX: 0000000000000000
[ 7679.268710] RDX: ff11000361e26cd8 RSI: ff11000361e1b880 RDI: ff11000361e1b880
[ 7679.281314] RBP: ffa00000001f7da8 R08: ff1100035f8fffe8 R09: 0000000000027ffb
[ 7679.293840] R10: 0000000000001f0a R11: ff1100035f840000 R12: ff11000109938000
[ 7679.306276] R13: 0000000000000002 R14: dead000000000122 R15: ffa00000001f7e18
[ 7679.318648] FS: 0000000000000000(0000) GS:ff11000361e00000(0000) knlGS:0000000000000000
[ 7679.332064] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 7679.342757] CR2: 00007ffff7fca168 CR3: 000000013b08a006 CR4: 0000000000471ef8
[ 7679.354984] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 7679.367207] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[ 7679.379370] PKRU: 55555554
[ 7679.386446] Call Trace:
[ 7679.393152] <TASK>
[ 7679.399363] ? __pfx_dev_watchdog+0x10/0x10
[ 7679.407870] call_timer_fn+0x31/0x110
[ 7679.415698] expire_timers+0xb2/0x120
[ 7679.423403] run_timer_softirq+0x179/0x1e0
[ 7679.431532] ? __schedule+0x2b1/0x820
[ 7679.439078] __do_softirq+0xd1/0x295
[ 7679.446426] ? __pfx_smpboot_thread_fn+0x10/0x10
[ 7679.454867] run_ksoftirqd+0x22/0x30
[ 7679.462058] smpboot_thread_fn+0xb7/0x160
[ 7679.469670] kthread+0xcd/0xf0
[ 7679.476097] ? __pfx_kthread+0x10/0x10
[ 7679.483211] ret_from_fork+0x29/0x50
[ 7679.490047] </TASK>
[ 7679.495204] ---[ end trace 0000000000000000 ]---
[ 7679.503179] igc 0000:01:00.0 enp1s0: Register Dump
[ 7679.511230] igc 0000:01:00.0 enp1s0: Register Name Value
[ 7679.519892] igc 0000:01:00.0 enp1s0: CTRL 181c0641
[ 7679.528782] igc 0000:01:00.0 enp1s0: STATUS 40280683
[ 7679.537551] igc 0000:01:00.0 enp1s0: CTRL_EXT 10000040
[ 7679.546284] igc 0000:01:00.0 enp1s0: MDIC 180a3800
[ 7679.554942] igc 0000:01:00.0 enp1s0: ICR 00000081
[ 7679.563503] igc 0000:01:00.0 enp1s0: RCTL 04408022
[ 7679.571963] igc 0000:01:00.0 enp1s0: RDLEN[0-3] 00001000 00001000 00001000 00001000
[ 7679.583075] igc 0000:01:00.0 enp1s0: RDH[0-3] 00000068 000000b6 0000000f 00000031
[ 7679.594162] igc 0000:01:00.0 enp1s0: RDT[0-3] 00000066 000000b2 0000000e 00000030
[ 7679.605174] igc 0000:01:00.0 enp1s0: RXDCTL[0-3] 02040808 02040808 02040808 02040808
[ 7679.616196] igc 0000:01:00.0 enp1s0: RDBAL[0-3] 1bb7c000 1bb7f000 1bb82000 0ef33000
[ 7679.627242] igc 0000:01:00.0 enp1s0: RDBAH[0-3] 00000001 00000001 00000001 00000001
[ 7679.638256] igc 0000:01:00.0 enp1s0: TCTL a503f0fa
[ 7679.646607] igc 0000:01:00.0 enp1s0: TDBAL[0-3] 2ba4a000 1bb6f000 1bb74000 1bb79000
[ 7679.657609] igc 0000:01:00.0 enp1s0: TDBAH[0-3] 00000001 00000001 00000001 00000001
[ 7679.668551] igc 0000:01:00.0 enp1s0: TDLEN[0-3] 00001000 00001000 00001000 00001000
[ 7679.679470] igc 0000:01:00.0 enp1s0: TDH[0-3] 000000a7 0000002d 000000bf 000000d9
[ 7679.690406] igc 0000:01:00.0 enp1s0: TDT[0-3] 000000a7 0000002d 000000bf 000000d9
[ 7679.701264] igc 0000:01:00.0 enp1s0: TXDCTL[0-3] 02100108 02100108 02100108 02100108
[ 7679.712123] igc 0000:01:00.0 enp1s0: Reset adapter
[ 7683.085967] igc 0000:01:00.0 enp1s0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 8086.945561] ------------[ cut here ]------------
Entering kdb (current=0xffffffff8220b200, pid 0) on processor 0
Oops: (null) due to oops @ 0xffffffff81573888
RIP: 0010:dql_completed+0x148/0x160
Code: c9 00 48 89 57 58 e9 46 ff ff ff 45 85 e4 41 0f 95 c4 41 39 db 0f 95
c1 41 84 cc 74 05 45 85 ed 78 0a 44 89 c1 e9 27 ff ff ff <0f> 0b 01 f6 44 89
c1 29 f1 0f 48 ca eb 8c cc cc cc cc cc cc cc cc
RSP: 0018:ffa0000000003e00 EFLAGS: 00010287
RAX: 000000000000006c RBX: ffa0000003eb0f78 RCX: ff11000109938000
RDX: 0000000000000003 RSI: 0000000000000160 RDI: ff110001002e9480
RBP: ffa0000000003ed8 R08: ff110001002e93c0 R09: ffa0000000003d28
R10: 0000000000007cc0 R11: 0000000000007c54 R12: 00000000ffffffd9
R13: ff1100037039cb00 R14: 00000000ffffffd9 R15: ff1100037039c048
FS: 0000000000000000(0000) GS:ff11000361e00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffff7fca168 CR3: 000000013b08a003 CR4: 0000000000471ef8
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
? igc_poll+0x1a9/0x14d0 [igc]
__napi_poll+0x2e/0x1b0
net_rx_action+0x126/0x250
__do_softirq+0xd1/0x295
irq_exit_rcu+0xc5/0xf0
common_interrupt+0x86/0xa0
</IRQ>
<TASK>
asm_common_interrupt+0x27/0x40
RIP: 0010:cpuidle_enter_state+0xd3/0x3e0
Code: 73 f1 ff ff 49 89 c6 8b 05 e2 ca a7 00 85 c0 0f 8f b3 02 00 00 31 ff e8 1b
de 75 ff 80 7d d7 00 0f 85 cd 01 00 00 fb 45 85 ff <0f> 88 fd 00 00 00 49 63 cf
4c 2b 75 c8 48 8d 04 49 48 89 ca 48 8d
RSP: 0018:ffffffff82203df0 EFLAGS: 00000202
RAX: ff11000361e2a200 RBX: 0000000000000002 RCX: 000000000000001f
RDX: 0000000000000000 RSI: 000000003cf3cf3d RDI: 0000000000000000
RBP: ffffffff82203e28 R08: 0000075ae38471c8 R09: 0000000000000018
R10: 000000000000031a R11: ffffffff8238dca0 R12: ffd1ffffff200000
R13: ffffffff8238dca0 R14: 0000075ae38471c8 R15: 0000000000000002
cpuidle_enter+0x2e/0x50
call_cpuidle+0x23/0x40
do_idle+0x1be/0x220
cpu_startup_entry+0x20/0x30
rest_init+0xb5/0xc0
arch_call_rest_init+0xe/0x30
start_kernel+0x448/0x760
x86_64_start_kernel+0x109/0x150
secondary_startup_64_no_verify+0xe0/0xeb
</TASK>
more>
[0]kdb>
[0]kdb>
[0]kdb> go
Catastrophic error detected
kdb_continue_catastrophic=0, type go a second time if you really want to
continue
[0]kdb> go
Catastrophic error detected
kdb_continue_catastrophic=0, attempting to continue
[ 8086.955689] refcount_t: underflow; use-after-free.
[ 8086.955697] WARNING: CPU: 0 PID: 0 at lib/refcount.c:28 refcount_warn_saturate+0xc2/0x110
[ 8086.955706] Modules linked in: xt_conntrack nft_chain_nat xt_MASQUERADE xt_addrtype nft_compat
nf_tables nfnetlink br_netfilter bridge stp llc overlay dm_mod emrcha(PO) emriio(PO) rktpm(PO)
cegbuf_mod(PO) patch_update(PO) se(PO) sgx_tgts(PO) mktme(PO) keylocker(PO) svtdx(PO)
svfs_pci_hotplug(PO) vtd_mod(PO) davemem(PO) svmabort(PO) svindexio(PO) usbx2(PO) ehci_sched(PO)
svheartbeat(PO) ioapic(PO) sv8259(PO) svintr(PO) lt(PO) pcierootport(PO) enginefw_mod(PO) ata(PO)
smbus(PO) spiflash_cdf(PO) arden(PO) dsa_iax(PO) oobmsm_punit(PO) cpm(PO) svkdb(PO) ebg_pch(PO)
pch(PO) sviotargets(PO) svbdf(PO) svmem(PO) svbios(PO) dram(PO) svtsc(PO) targets(PO) superio(PO)
svkernel(PO) cswitch(PO) mcf(PO) pentiumIII_mod(PO) fs_svfs(PO) mdevdefdb(PO) svfs_os_services(O)
ixgbe mdio mdio_devres libphy emeraldrapids_svdefs(PO) regsupport(O) libnvdimm nls_cp437
snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg
snd_hda_codec snd_hwdep x86_pkg_temp_thermal snd_hda_core snd_pcm snd_timer isst_if_mbox_pci
[ 8086.955751] input_leds isst_if_mmio sg snd isst_if_common soundcore wmi button sad9(O) drm
fuse backlight configfs efivarfs ip_tables x_tables vmd sdhci led_class rtl8150 r8152 hid_generic
pegasus mmc_block usbhid mmc_core hid megaraid_sas ixgb igb i2c_algo_bit ice i40e hpsa
scsi_transport_sas e1000e e1000 e100 ax88179_178a usbnet xhci_pci sd_mod xhci_hcd t10_pi
crc32c_intel crc64_rocksoft igc crc64 crc_t10dif usbcore crct10dif_generic ptp crct10dif_common
usb_common pps_core
[ 8086.955784] RIP: 0010:refcount_warn_saturate+0xc2/0x110
[ 8086.955788] Code: 01 e8 82 e7 b4 ff 0f 0b 5d c3 cc cc cc cc 80 3d 68 c6 eb 00 00 75 81
48 c7 c7 a0 87 f6 81 c6 05 58 c6 eb 00 01 e8 5e e7 b4 ff <0f> 0b 5d c3 cc cc cc cc 80 3d
42 c6 eb 00 00 0f 85 59 ff ff ff 48
[ 8086.955790] RSP: 0018:ffa0000000003da0 EFLAGS: 00010286
[ 8086.955793] RAX: 0000000000000000 RBX: ff1100011da40ee0 RCX: ff11000361e1b888
[ 8086.955794] RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ff11000361e1b880
[ 8086.955795] RBP: ffa0000000003da0 R08: 80000000ffff9f45 R09: ffa0000000003d28
[ 8086.955796] R10: ff1100035f840000 R11: 0000000000000028 R12: ff11000319ff8000
[ 8086.955797] R13: ff1100011bb79d60 R14: 00000000ffffffd6 R15: ff1100037039cb00
[ 8086.955798] FS: 0000000000000000(0000) GS:ff11000361e00000(0000) knlGS:0000000000000000
[ 8086.955800] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 8086.955801] CR2: 00007ffff7fca168 CR3: 000000013b08a003 CR4: 0000000000471ef8
[ 8086.955803] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 8086.955803] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[ 8086.955804] PKRU: 55555554
[ 8086.955805] Call Trace:
[ 8086.955806] <IRQ>
[ 8086.955808] tcp_wfree+0x112/0x130
[ 8086.955814] skb_release_head_state+0x24/0xa0
[ 8086.955818] napi_consume_skb+0x9c/0x160
[ 8086.955821] igc_poll+0x5d8/0x14d0 [igc]
[ 8086.955835] __napi_poll+0x2e/0x1b0
[ 8086.955839] net_rx_action+0x126/0x250
[ 8086.955843] __do_softirq+0xd1/0x295
[ 8086.955846] irq_exit_rcu+0xc5/0xf0
[ 8086.955851] common_interrupt+0x86/0xa0
[ 8086.955857] </IRQ>
[ 8086.955857] <TASK>
[ 8086.955858] asm_common_interrupt+0x27/0x40
[ 8086.955862] RIP: 0010:cpuidle_enter_state+0xd3/0x3e0
[ 8086.955866] Code: 73 f1 ff ff 49 89 c6 8b 05 e2 ca a7 00 85 c0 0f 8f b3 02 00 00 31 ff e8
1b de 75 ff 80 7d d7 00 0f 85 cd 01 00 00 fb 45 85 ff <0f> 88 fd 00 00 00 49 63 cf 4c 2b 75
c8 48 8d 04 49 48 89 ca 48 8d
[ 8086.955867] RSP: 0018:ffffffff82203df0 EFLAGS: 00000202
[ 8086.955869] RAX: ff11000361e2a200 RBX: 0000000000000002 RCX: 000000000000001f
[ 8086.955870] RDX: 0000000000000000 RSI: 000000003cf3cf3d RDI: 0000000000000000
[ 8086.955871] RBP: ffffffff82203e28 R08: 0000075ae38471c8 R09: 0000000000000018
[ 8086.955872] R10: 000000000000031a R11: ffffffff8238dca0 R12: ffd1ffffff200000
[ 8086.955873] R13: ffffffff8238dca0 R14: 0000075ae38471c8 R15: 0000000000000002
[ 8086.955875] cpuidle_enter+0x2e/0x50
[ 8086.955880] call_cpuidle+0x23/0x40
[ 8086.955884] do_idle+0x1be/0x220
[ 8086.955887] cpu_startup_entry+0x20/0x30
[ 8086.955889] rest_init+0xb5/0xc0
[ 8086.955892] arch_call_rest_init+0xe/0x30
[ 8086.955895] start_kernel+0x448/0x760
[ 8086.955898] x86_64_start_kernel+0x109/0x150
[ 8086.955900] secondary_startup_64_no_verify+0xe0/0xeb
[ 8086.955904] </TASK>
[ 8086.955904] ---[ end trace 0000000000000000 ]---
[ 8086.955912] ------------[ cut here ]------------
[ 8086.955913] kernel BUG at lib/dynamic_queue_limits.c:27!
[ 8086.955918] invalid opcode: 0000 [#1] SMP
[ 8086.955922] RIP: 0010:dql_completed+0x148/0x160
[ 8086.955925] Code: c9 00 48 89 57 58 e9 46 ff ff ff 45 85 e4 41 0f 95 c4 41 39 db
0f 95 c1 41 84 cc 74 05 45 85 ed 78 0a 44 89 c1 e9 27 ff ff ff <0f> 0b 01 f6 44 89
c1 29 f1 0f 48 ca eb 8c cc cc cc cc cc cc cc cc
[ 8086.955927] RSP: 0018:ffa0000000003e00 EFLAGS: 00010287
[ 8086.955928] RAX: 000000000000006c RBX: ffa0000003eb0f78 RCX: ff11000109938000
[ 8086.955929] RDX: 0000000000000003 RSI: 0000000000000160 RDI: ff110001002e9480
[ 8086.955930] RBP: ffa0000000003ed8 R08: ff110001002e93c0 R09: ffa0000000003d28
[ 8086.955931] R10: 0000000000007cc0 R11: 0000000000007c54 R12: 00000000ffffffd9
[ 8086.955932] R13: ff1100037039cb00 R14: 00000000ffffffd9 R15: ff1100037039c048
[ 8086.955933] FS: 0000000000000000(0000) GS:ff11000361e00000(0000) knlGS:0000000000000000
[ 8086.955934] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 8086.955935] CR2: 00007ffff7fca168 CR3: 000000013b08a003 CR4: 0000000000471ef8
[ 8086.955936] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 8086.955937] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[ 8086.955938] PKRU: 55555554
[ 8086.955939] Call Trace:
[ 8086.955939] <IRQ>
[ 8086.955940] ? igc_poll+0x1a9/0x14d0 [igc]
[ 8086.955949] __napi_poll+0x2e/0x1b0
[ 8086.955952] net_rx_action+0x126/0x250
[ 8086.955956] __do_softirq+0xd1/0x295
[ 8086.955958] irq_exit_rcu+0xc5/0xf0
[ 8086.955961] common_interrupt+0x86/0xa0
[ 8086.955964] </IRQ>
[ 8086.955965] <TASK>
[ 8086.955965] asm_common_interrupt+0x27/0x40
[ 8086.955968] RIP: 0010:cpuidle_enter_state+0xd3/0x3e0
[ 8086.955971] Code: 73 f1 ff ff 49 89 c6 8b 05 e2 ca a7 00 85 c0 0f 8f b3 02 00 00
31 ff e8 1b de 75 ff 80 7d d7 00 0f 85 cd 01 00 00 fb 45 85 ff <0f> 88 fd 00 00 00
49 63 cf 4c 2b 75 c8 48 8d 04 49 48 89 ca 48 8d
[ 8086.955972] RSP: 0018:ffffffff82203df0 EFLAGS: 00000202
[ 8086.955973] RAX: ff11000361e2a200 RBX: 0000000000000002 RCX: 000000000000001f
[ 8086.955974] RDX: 0000000000000000 RSI: 000000003cf3cf3d RDI: 0000000000000000
[ 8086.955974] RBP: ffffffff82203e28 R08: 0000075ae38471c8 R09: 0000000000000018
[ 8086.955975] R10: 000000000000031a R11: ffffffff8238dca0 R12: ffd1ffffff200000
[ 8086.955976] R13: ffffffff8238dca0 R14: 0000075ae38471c8 R15: 0000000000000002
[ 8086.955978] cpuidle_enter+0x2e/0x50
[ 8086.955981] call_cpuidle+0x23/0x40
[ 8086.955984] do_idle+0x1be/0x220
[ 8086.955985] cpu_startup_entry+0x20/0x30
[ 8086.955987] rest_init+0xb5/0xc0
[ 8086.955990] arch_call_rest_init+0xe/0x30
[ 8086.955992] start_kernel+0x448/0x760
[ 8086.955994] x86_64_start_kernel+0x109/0x150
[ 8086.955996] secondary_startup_64_no_verify+0xe0/0xeb
[ 8086.955998] </TASK>
[ 8086.955999] Modules linked in: xt_conntrack nft_chain_nat xt_MASQUERADE xt_addrtype
nft_compat nf_tables nfnetlink br_netfilter bridge stp llc overlay dm_mod emrcha(PO) emriio(PO)
rktpm(PO) cegbuf_mod(PO) patch_update(PO) se(PO) sgx_tgts(PO) mktme(PO) keylocker(PO) svtdx(PO)
svfs_pci_hotplug(PO) vtd_mod(PO) davemem(PO) svmabort(PO) svindexio(PO) usbx2(PO) ehci_sched(PO)
svheartbeat(PO) ioapic(PO) sv8259(PO) svintr(PO) lt(PO) pcierootport(PO) enginefw_mod(PO) ata(PO)
smbus(PO) spiflash_cdf(PO) arden(PO) dsa_iax(PO) oobmsm_punit(PO) cpm(PO) svkdb(PO) ebg_pch(PO)
pch(PO) sviotargets(PO) svbdf(PO) svmem(PO) svbios(PO) dram(PO) svtsc(PO) targets(PO) superio(PO)
svkernel(PO) cswitch(PO) mcf(PO) pentiumIII_mod(PO) fs_svfs(PO) mdevdefdb(PO) svfs_os_services(O)
ixgbe mdio mdio_devres libphy emeraldrapids_svdefs(PO) regsupport(O) libnvdimm nls_cp437
snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg
snd_hda_codec snd_hwdep x86_pkg_temp_thermal snd_hda_core snd_pcm snd_timer isst_if_mbox_pci
[ 8086.956029] input_leds isst_if_mmio sg snd isst_if_common soundcore wmi button sad9(O) drm
fuse backlight configfs efivarfs ip_tables x_tables vmd sdhci led_class rtl8150 r8152 hid_generic
pegasus mmc_block usbhid mmc_core hid megaraid_sas ixgb igb i2c_algo_bit ice i40e hpsa
scsi_transport_sas e1000e e1000 e100 ax88179_178a usbnet xhci_pci sd_mod xhci_hcd t10_pi
crc32c_intel crc64_rocksoft igc crc64 crc_t10dif usbcore crct10dif_generic ptp crct10dif_common
usb_common pps_core
[16762.543675] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.593 msecs
[16762.543678] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.595 msecs
[16762.543673] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.495 msecs
[16762.543679] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.599 msecs
[16762.543678] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.598 msecs
[16762.543690] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.605 msecs
[16762.543684] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.599 msecs
[16762.543693] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.613 msecs
[16762.543784] ---[ end trace 0000000000000000 ]---
[16762.849099] RIP: 0010:dql_completed+0x148/0x160
PANIC: Fatal exception in interrupt
Fixes: 9b275176270e ("igc: Add ndo_tx_timeout support")
Tested-by: Alejandra Victoria Alcaraz <alejandra.victoria.alcaraz@intel.com>
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The qca8k switch doesn't support using 0 as VID and require a default
VID to be always set. MDB add/del function doesn't currently handle
this and are currently setting the default VID.
Fix this by correctly handling this corner case and internally use the
default VID for VID 0 case.
Fixes: ba8f870dfa63 ("net: dsa: qca8k: add support for mdb_add/del")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On deleting an MDB entry for a port, fdb_search_and_del is used.
An FDB entry can't be modified so it needs to be deleted and readded
again with the new portmap (and the port deleted as requested)
We use the SEARCH operator to search the entry to edit by vid and mac
address and then we check the aging if we actually found an entry.
Currently the code suffer from a bug where the searched fdb entry is
never read again with the found values (if found) resulting in the code
always returning -EINVAL as aging was always 0.
Fix this by correctly read the fdb entry after it was searched.
Fixes: ba8f870dfa63 ("net: dsa: qca8k: add support for mdb_add/del")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On inserting a mdb entry, fdb_search_and_insert is used to add a port to
the qca8k target entry in the FDB db.
A FDB entry can't be modified so it needs to be removed and insert again
with the new values.
To detect if an entry already exist, the SEARCH operation is used and we
check the aging of the entry. If the entry is not 0, the entry exist and
we proceed to delete it.
Current code have 2 main problem:
- The condition to check if the FDB entry exist is wrong and should be
the opposite.
- When a FDB entry doesn't exist, aging was never actually set to the
STATIC value resulting in allocating an invalid entry.
Fix both problem by adding aging support to the function, calling the
function with STATIC as aging by default and finally by correct the
condition to check if the entry actually exist.
Fixes: ba8f870dfa63 ("net: dsa: qca8k: add support for mdb_add/del")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The qca8xxx switch supports 2 way to write reg values, a slow way using
mdio and a fast way by sending specially crafted mgmt packet to
read/write reg.
The fast way can support up to 32 bytes of data as eth packet are used
to send/receive.
This correctly works for almost the entire regmap of the switch but with
the use of some kernel selftests for dsa drivers it was found a funny
and interesting hw defect/limitation.
For some specific reg, bulk write won't work and will result in writing
only part of the requested regs resulting in half data written. This was
especially hard to track and discover due to the total strangeness of
the problem and also by the specific regs where this occurs.
This occurs in the specific regs of the ATU table, where multiple entry
needs to be written to compose the entire entry.
It was discovered that with a bulk write of 12 bytes on
QCA8K_REG_ATU_DATA0 only QCA8K_REG_ATU_DATA0 and QCA8K_REG_ATU_DATA2
were written, but QCA8K_REG_ATU_DATA1 was always zero.
Tcpdump was used to make sure the specially crafted packet was correct
and this was confirmed.
The problem was hard to track as the lack of QCA8K_REG_ATU_DATA1
resulted in an entry somehow possible as the first bytes of the mac
address are set in QCA8K_REG_ATU_DATA0 and the entry type is set in
QCA8K_REG_ATU_DATA2.
Funlly enough writing QCA8K_REG_ATU_DATA1 results in the same problem
with QCA8K_REG_ATU_DATA2 empty and QCA8K_REG_ATU_DATA1 and
QCA8K_REG_ATU_FUNC correctly written.
A speculation on the problem might be that there are some kind of
indirection internally when accessing these regs and they can't be
accessed all together, due to the fact that it's really a table mapped
somewhere in the switch SRAM.
Even more funny is the fact that every other reg was tested with all
kind of combination and they are not affected by this problem. Read
operation was also tested and always worked so it's not affected by this
problem.
The problem is not present if we limit writing a single reg at times.
To handle this hardware defect, enable use_single_write so that bulk
api can correctly split the write in multiple different operation
effectively reverting to a non-bulk write.
Cc: Mark Brown <broonie@kernel.org>
Fixes: c766e077d927 ("net: dsa: qca8k: convert to regmap read/write API")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A previous commit tried to come up with more generic subpool
names, but this isn't quite working: the node name was used
elsewhere to match pools to consumers which regressed the
nVidia Tegra 2/3 video decoder.
Revert back to an earlier approach using of_node_full_name()
instead of just the name to make sure the pool name is more
unique, and change both sites using this in the kernel.
It is not perfect since two SRAM nodes could have the same
subpool name but it makes the situation better than before.
Reported-by: Dmitry Osipenko <digetx@gmail.com>
Fixes: 21e5a2d10c8f ("misc: sram: Generate unique names for subpools")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20230622074520.3058027-1-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add AMD back to the embargoed-hardware-issues.rst list. There was
confusion about a recent issue that ended up being due to third-party's
misrepresentation, not AMD, so add AMD back to the list to get notified
properly as they understand the proper procedures to follow.
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/2023072514-submersed-yanking-652e@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Jeff will now start maintaining these drivers together with me.
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230725094248.3205486-1-kvalo@kernel.org
|
|
Last activity from Lennert is from 2012 so mark the driver as orphan.
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230724104547.3061709-10-kvalo@kernel.org
|
|
There's no maintainer for b43 so mark it as orphan.
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230724104547.3061709-9-kvalo@kernel.org
|
|
Last activity from Ulrich is from 2007 so mark the driver orphan.
Remove the zd1211-devs list, I doubt anyone uses it anymore. The webpage seems
to be down so remove that as well.
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230724104547.3061709-8-kvalo@kernel.org
|
|
There's no maintainer for this driver so mark it as orphan.
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230724104547.3061709-7-kvalo@kernel.org
|
|
Last activity from Jussi for this driver is from 2013 so mark the driver
orphan.
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230724104547.3061709-6-kvalo@kernel.org
|
|
Last activity from Pontus for this driver is from 2013 so mark the driver
orphan.
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230724104547.3061709-5-kvalo@kernel.org
|
|
Last activity from Solomon is from 2013 so mark the driver orphan.
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230724104547.3061709-4-kvalo@kernel.org
|
|
Last activity from Simon is from 2005 so mark the driver is orphan.
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230724104547.3061709-3-kvalo@kernel.org
|
|
Yan-Hsuan has been away since 2021 and Ping has been the de facto maintainer
the past year, actively reviewing patches and doing all other maintainer
duties. So fix the MAINTAINERS file to show the current situation.
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230724104547.3061709-2-kvalo@kernel.org
|
|
GCC 12"
This reverts commit bd1d129daa3ede265a880e2c6a7f91eab0f4dc62.
The dangling-pointer warnings were disabled kernel-wide by commit 49beadbd47c2
("gcc-12: disable '-Wdangling-pointer' warning for now") for v5.19. So this
hack in ath6kl is not needed anymore.
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230724100823.2948804-1-kvalo@kernel.org
|
|
The reporter noticed a warning when running iwlwifi:
WARNING: CPU: 8 PID: 659 at mm/page_alloc.c:4453 __alloc_pages+0x329/0x340
As cfg80211_parse_colocated_ap() is not expected to return a negative
value return 0 and not a negative value if cfg80211_calc_short_ssid()
fails.
Fixes: c8cb5b854b40f ("nl80211/cfg80211: support 6 GHz scanning")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217675
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230723201043.3007430-1-ilan.peer@intel.com
|
|
This reverts commit 13aa2fb692d3717767303817f35b3e650109add3.
This commit broke QCN9074 initialisation:
[ 358.960477] ath11k_pci 0000:04:00.0: ce desc not available for wmi command 36866
[ 358.960481] ath11k_pci 0000:04:00.0: failed to send WMI_STA_POWERSAVE_PARAM_CMDID
[ 358.960484] ath11k_pci 0000:04:00.0: could not set uapsd params -105
As there's no fix available let's just revert it to get QCN9074 working again.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217536
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230720151444.2016637-1-kvalo@kernel.org
|
|
Xen 4.17 supports the creation of static evtchns. To allow user space
application to bind static evtchns introduce new ioctl
"IOCTL_EVTCHN_BIND_STATIC". Existing IOCTL doing more than binding
that’s why we need to introduce the new IOCTL to only bind the static
event channels.
Static evtchns to be available for use during the lifetime of the
guest. When the application exits, __unbind_from_irq() ends up being
called from release() file operations because of that static evtchns
are getting closed. To avoid closing the static event channel, add the
new bool variable "is_static" in "struct irq_info" to mark the event
channel static when creating the event channel to avoid closing the
static evtchn.
Also, take this opportunity to remove the open-coded version of the
evtchn close in drivers/xen/evtchn.c file and use xen_evtchn_close().
Signed-off-by: Rahul Singh <rahul.singh@arm.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/ae7329bf1713f83e4aad4f3fa0f316258c40a3e9.1689677042.git.rahul.singh@arm.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Fix to check the availability of fprobe and kprobes for
add_remove_btfarg.tc.
Only if both kprobe and fprobe are not supported, it should return
"unsupported".
Link: https://lore.kernel.org/all/169024904889.395371.17998733386857387118.stgit@devnote2/
Fixes: 4231f30fcc34 ("selftests/ftrace: Add BTF arguments test cases")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Since find_btf_func_param() abd btf_type_by_id() can return NULL,
the caller must check the return value correctly.
Link: https://lore.kernel.org/all/169024903951.395371.11361556840733470934.stgit@devnote2/
Fixes: b576e09701c7 ("tracing/probes: Support function parameters if BTF is available")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Last year, the code that manages GSI channel transactions switched
from using spinlock-protected linked lists to using indexes into the
ring buffer used for a channel. Recently, Google reported seeing
transaction reference count underflows occasionally during shutdown.
Doug Anderson found a way to reproduce the issue reliably, and
bisected the issue to the commit that eliminated the linked lists
and the lock. The root cause was ultimately determined to be
related to unused transactions being committed as part of the modem
shutdown cleanup activity. Unused transactions are not normally
expected (except in error cases).
The modem uses some ranges of IPA-resident memory, and whenever it
shuts down we zero those ranges. In ipa_filter_reset_table() a
transaction is allocated to zero modem filter table entries. If
hashing is not supported, hashed table memory should not be zeroed.
But currently nothing prevents that, and the result is an unused
transaction. Something similar occurs when we zero routing table
entries for the modem.
By preventing any attempt to clear hashed tables when hashing is not
supported, the reference count underflow is avoided in this case.
Note that there likely remains an issue with properly freeing unused
transactions (if they occur due to errors). This patch addresses
only the underflows that Google originally reported.
Cc: <stable@vger.kernel.org> # 6.1.x
Fixes: d338ae28d8a8 ("net: ipa: kill all other transaction lists")
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20230724224055.1688854-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Kuniyuki Iwashima says:
====================
net: Fix error/warning by -fstrict-flex-arrays=3.
df8fc4e934c1 ("kbuild: Enable -fstrict-flex-arrays=3") started applying
strict rules for standard string functions (strlen(), memcpy(), etc.) if
CONFIG_FORTIFY_SOURCE=y.
This series fixes two false positives caught by syzkaller.
v2: https://lore.kernel.org/netdev/20230720004410.87588-1-kuniyu@amazon.com/
v1: https://lore.kernel.org/netdev/20230719185322.44255-1-kuniyu@amazon.com/
====================
Link: https://lore.kernel.org/r/20230724213425.22920-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzkaller found a warning in packet_getname() [0], where we try to
copy 16 bytes to sockaddr_ll.sll_addr[8].
Some devices (ip6gre, vti6, ip6tnl) have 16 bytes address expressed
by struct in6_addr. Also, Infiniband has 32 bytes as MAX_ADDR_LEN.
The write seems to overflow, but actually not since we use struct
sockaddr_storage defined in __sys_getsockname() and its size is 128
(_K_SS_MAXSIZE) bytes. Thus, we have sufficient room after sll_addr[]
as __data[].
To avoid the warning, let's add a flex array member union-ed with
sll_addr.
Another option would be to use strncpy() and limit the copied length
to sizeof(sll_addr), but it will return the partial address and break
an application that passes sockaddr_storage to getsockname().
[0]:
memcpy: detected field-spanning write (size 16) of single field "sll->sll_addr" at net/packet/af_packet.c:3604 (size 8)
WARNING: CPU: 0 PID: 255 at net/packet/af_packet.c:3604 packet_getname+0x25c/0x3a0 net/packet/af_packet.c:3604
Modules linked in:
CPU: 0 PID: 255 Comm: syz-executor750 Not tainted 6.5.0-rc1-00330-g60cc1f7d0605 #4
Hardware name: linux,dummy-virt (DT)
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : packet_getname+0x25c/0x3a0 net/packet/af_packet.c:3604
lr : packet_getname+0x25c/0x3a0 net/packet/af_packet.c:3604
sp : ffff800089887bc0
x29: ffff800089887bc0 x28: ffff000010f80f80 x27: 0000000000000003
x26: dfff800000000000 x25: ffff700011310f80 x24: ffff800087d55000
x23: dfff800000000000 x22: ffff800089887c2c x21: 0000000000000010
x20: ffff00000de08310 x19: ffff800089887c20 x18: ffff800086ab1630
x17: 20646c6569662065 x16: 6c676e697320666f x15: 0000000000000001
x14: 1fffe0000d56d7ca x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 3e60944c3da92b00
x8 : 3e60944c3da92b00 x7 : 0000000000000001 x6 : 0000000000000001
x5 : ffff8000898874f8 x4 : ffff800086ac99e0 x3 : ffff8000803f8808
x2 : 0000000000000001 x1 : 0000000100000000 x0 : 0000000000000000
Call trace:
packet_getname+0x25c/0x3a0 net/packet/af_packet.c:3604
__sys_getsockname+0x168/0x24c net/socket.c:2042
__do_sys_getsockname net/socket.c:2057 [inline]
__se_sys_getsockname net/socket.c:2054 [inline]
__arm64_sys_getsockname+0x7c/0x94 net/socket.c:2054
__invoke_syscall arch/arm64/kernel/syscall.c:38 [inline]
invoke_syscall+0x98/0x2c0 arch/arm64/kernel/syscall.c:52
el0_svc_common+0x134/0x240 arch/arm64/kernel/syscall.c:139
do_el0_svc+0x64/0x198 arch/arm64/kernel/syscall.c:188
el0_svc+0x2c/0x7c arch/arm64/kernel/entry-common.c:647
el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:665
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591
Fixes: df8fc4e934c1 ("kbuild: Enable -fstrict-flex-arrays=3")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230724213425.22920-3-kuniyu@amazon.com
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzkaller found a bug in unix_bind_bsd() [0]. We can reproduce it
by bind()ing a socket on a path with length 108.
108 is the size of sun_addr of struct sockaddr_un and is the maximum
valid length for the pathname socket. When calling bind(), we use
struct sockaddr_storage as the actual buffer size, so terminating
sun_addr[108] with null is legitimate as done in unix_mkname_bsd().
However, strlen(sunaddr) for such a case causes fortify_panic() if
CONFIG_FORTIFY_SOURCE=y. __fortify_strlen() has no idea about the
actual buffer size and see the string as unterminated.
Let's use strnlen() to allow sun_addr to be unterminated at 107.
[0]:
detected buffer overflow in __fortify_strlen
kernel BUG at lib/string_helpers.c:1031!
Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 255 Comm: syz-executor296 Not tainted 6.5.0-rc1-00330-g60cc1f7d0605 #4
Hardware name: linux,dummy-virt (DT)
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : fortify_panic+0x1c/0x20 lib/string_helpers.c:1030
lr : fortify_panic+0x1c/0x20 lib/string_helpers.c:1030
sp : ffff800089817af0
x29: ffff800089817af0 x28: ffff800089817b40 x27: 1ffff00011302f68
x26: 000000000000006e x25: 0000000000000012 x24: ffff800087e60140
x23: dfff800000000000 x22: ffff800089817c20 x21: ffff800089817c8e
x20: 000000000000006c x19: ffff00000c323900 x18: ffff800086ab1630
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000001
x14: 1ffff00011302eb8 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 64a26b65474d2a00
x8 : 64a26b65474d2a00 x7 : 0000000000000001 x6 : 0000000000000001
x5 : ffff800089817438 x4 : ffff800086ac99e0 x3 : ffff800080f19e8c
x2 : 0000000000000001 x1 : 0000000100000000 x0 : 000000000000002c
Call trace:
fortify_panic+0x1c/0x20 lib/string_helpers.c:1030
_Z16__fortify_strlenPKcU25pass_dynamic_object_size1 include/linux/fortify-string.h:217 [inline]
unix_bind_bsd net/unix/af_unix.c:1212 [inline]
unix_bind+0xba8/0xc58 net/unix/af_unix.c:1326
__sys_bind+0x1ac/0x248 net/socket.c:1792
__do_sys_bind net/socket.c:1803 [inline]
__se_sys_bind net/socket.c:1801 [inline]
__arm64_sys_bind+0x7c/0x94 net/socket.c:1801
__invoke_syscall arch/arm64/kernel/syscall.c:38 [inline]
invoke_syscall+0x98/0x2c0 arch/arm64/kernel/syscall.c:52
el0_svc_common+0x134/0x240 arch/arm64/kernel/syscall.c:139
do_el0_svc+0x64/0x198 arch/arm64/kernel/syscall.c:188
el0_svc+0x2c/0x7c arch/arm64/kernel/entry-common.c:647
el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:665
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591
Code: aa0003e1 d0000e80 91030000 97ffc91a (d4210000)
Fixes: df8fc4e934c1 ("kbuild: Enable -fstrict-flex-arrays=3")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230724213425.22920-2-kuniyu@amazon.com
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The previous commit 954d1fa1ac93 ("macvlan: Add netlink attribute for
broadcast cutoff") added one additional attribute named
IFLA_MACVLAN_BC_CUTOFF to allow broadcast cutfoff.
However, it forgot to describe the nla_policy at macvlan_policy
(drivers/net/macvlan.c). Hence, this suppose NLA_S32 (4 bytes) integer
can be faked as empty (0 bytes) by a malicious user, which could leads
to OOB in heap just like CVE-2023-3773.
To fix it, this commit just completes the nla_policy description for
IFLA_MACVLAN_BC_CUTOFF. This enforces the length check and avoids the
potential OOB read.
Fixes: 954d1fa1ac93 ("macvlan: Add netlink attribute for broadcast cutoff")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230723080205.3715164-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If pm8001_init_sas_add() fails, return error code in pm8001_pci_probe().
Fixes: 14a8f116cdc0 ("scsi: pm80xx: Add GET_NVMD timeout during probe")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20230725125706.566990-1-yangyingliang@huawei.com
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
