summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-11-09ARM: dts: stm32: Keep VDDA LDO1 always on on DHCOMMarek Vasut
The VDDA LDO1 PMIC output supplies the analog VDDA input of the STM32MP1 on DHCOM, keep it always on, otherwise there could be leakage through the SoC. Fixes: 34e0c7847dcf ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-11-09ARM: dts: stm32: Enable thermal sensor support on stm32mp15xx-dhcorMarek Vasut
Enable STM32 Digital Thermal Sensor driver for stm32mp15xx-dhcor SoMs. Fixes: 94cafe1b6482 ("ARM: dts: stm32: Add Avenger96 devicetree support based on STM32MP157A") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-11-09futex: Don't enable IRQs unconditionally in put_pi_state()Dan Carpenter
The exit_pi_state_list() function calls put_pi_state() with IRQs disabled and is not expecting that IRQs will be enabled inside the function. Use the _irqsave() variant so that IRQs are restored to the original state instead of being enabled unconditionally. Fixes: 153fbd1226fb ("futex: Fix more put_pi_state() vs. exit_pi_state_list() races") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20201106085205.GA1159983@mwanda
2020-11-09ARM: dts: stm32: Define VIO regulator supply on DHCOMMarek Vasut
The VIO regulator is supplied by PMIC Buck3, describe this in the DT. Fixes: 34e0c7847dcf ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-11-09ARM: dts: stm32: Fix LED5 on STM32MP1 DHCOM PDK2Marek Vasut
On the prototype DHCOM, the LED5 was connected to pin PG2 of the STM32MP15xx, however on the production SoM this was changed to pin PC6. Update the connection in the DT. Fixes: 81d5fc719798 ("ARM: dts: stm32: Add GPIO LEDs for STM32MP1 DHCOM PDK2") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-11-09ARM: dts: stm32: Fix TA3-GPIO-C key on STM32MP1 DHCOM PDK2Marek Vasut
On the prototype DHCOM, the TA3-GPIO-C button was connected to pin PI11 of the STM32MP15xx, however on the production SoM this was changed to pin PG0 to free up the IRQ line 11 for LAN8710i PHY IRQ. Update the connection in the DT. Since the IRQ line 0 is used for PMIC as well and cannot be shared with the button, make the button polled. Fixes: 87cabf9405cb ("ARM: dts: stm32: Add GPIO keys for STM32MP1 DHCOM PDK2") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-11-09dmaengine: xilinx_dma: Fix SG capability check for MCDMAMatthew Murrian
The SG capability is inherently present with Multichannel DMA operation. The register used to check for this capability with other DMA driver types is not defined for MCDMA. Fixes: 6ccd692bfb7f ("dmaengine: xilinx_dma: Add Xilinx AXI MCDMA Engine driver support") Signed-off-by: Matthew Murrian <matthew.murrian@goctsi.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1604473206-32573-4-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-11-09dmaengine: xilinx_dma: Fix usage of xilinx_aximcdma_tx_segmentMatthew Murrian
Several code sections incorrectly use struct xilinx_axidma_tx_segment instead of struct xilinx_aximcdma_tx_segment when operating as Multichannel DMA. As their structures are similar, this just works. Fixes: 6ccd692bfb7f ("dmaengine: xilinx_dma: Add Xilinx AXI MCDMA Engine driver support") Signed-off-by: Matthew Murrian <matthew.murrian@goctsi.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1604473206-32573-3-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-11-09dmaengine: xilinx_dma: use readl_poll_timeout_atomic variantMarc Ferland
The xilinx_dma_poll_timeout macro is sometimes called while holding a spinlock (see xilinx_dma_issue_pending() for an example) this means we shouldn't sleep when polling the dma channel registers. To address it in xilinx poll timeout macro use readl_poll_timeout_atomic instead of readl_poll_timeout variant. Signed-off-by: Marc Ferland <ferlandm@amotus.ca> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1604473206-32573-2-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-11-09HID: add HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE for Gamevice devicesChris Ye
Kernel 5.4 introduces HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE, devices need to be set explicitly with this flag. Signed-off-by: Chris Ye <lzye@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-11-09Merge back cpufreq updates for v5.11.Rafael J. Wysocki
2020-11-09arm64: dts: renesas: r8a774e1: Add missing audio_clk_bLad Prabhakar
Add audio_clk_b configured as 0 Hz, this will be overridden by the boards providing the audio clock. Fixes: 8183a7938cfec ("arm64: dts: renesas: r8a774e1: Add audio support") Reported-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20201104105508.21197-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-11-09s390: fix system call exit pathHeiko Carstens
The system call exit path is running with interrupts enabled while checking for TIF/PIF/CIF bits which require special handling. If all bits have been checked interrupts are disabled and the kernel exits to user space. The problem is that after checking all bits and before interrupts are disabled bits can be set already again, due to interrupt handling. This means that the kernel can exit to user space with some TIF/PIF/CIF bits set, which should never happen. E.g. TIF_NEED_RESCHED might be set, which might lead to additional latencies, since that bit will only be recognized with next exit to user space. Fix this by checking the corresponding bits only when interrupts are disabled. Fixes: 0b0ed657fe00 ("s390: remove critical section cleanup from entry.S") Cc: <stable@vger.kernel.org> # 5.8 Acked-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-09tee: amdtee: synchronize access to shm listRijo Thomas
Synchronize access to shm or shared memory buffer list to prevent race conditions due to concurrent updates to shared shm list by multiple threads. Fixes: 757cc3e9ff1d ("tee: add AMD-TEE driver") Reviewed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com> Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-11-09tee: amdtee: fix memory leak due to reset of global shm listRijo Thomas
The driver maintains a list of shared memory buffers along with their mapped buffer id's in a global linked list. These buffers need to be unmapped after use by the user-space client. The global shared memory list is initialized to zero entries in the function amdtee_open(). This clearing of list entries can be a source for memory leak on secure side if the global linked list previously held some mapped buffer entries allocated from another TEE context. Fix potential memory leak issue by moving global shared memory list to AMD-TEE driver context data structure. Fixes: 757cc3e9ff1d ("tee: add AMD-TEE driver") Reviewed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com> Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-11-09video: hyperv_fb: include vmalloc.hOlaf Hering
hvfb_getmem uses vzalloc, therefore vmalloc.h should be included. Fixes commit d21987d709e807ba7bbf47044deb56a3c02e8be4 ("video: hyperv: hyperv_fb: Support deferred IO for Hyper-V frame buffer driver") Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20201106183941.9751-1-olaf@aepfle.de
2020-11-08Input: sunkbd - avoid use-after-free in teardown pathsDmitry Torokhov
We need to make sure we cancel the reinit work before we tear down the driver structures. Reported-by: Bodong Zhao <nopitydays@gmail.com> Tested-by: Bodong Zhao <nopitydays@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-08Linux 5.10-rc3v5.10-rc3Linus Torvalds
2020-11-08net/sunrpc: fix useless comparison in proc_do_xprt()Dan Carpenter
In the original code, the "if (*lenp < 0)" check didn't work because "*lenp" is unsigned. Fortunately, the memory_read_from_buffer() call will never fail in this context so it doesn't affect runtime. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2020-11-08Merge tag 'driver-core-5.10-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core documentation fixes from Greg KH: "Some small Documentation fixes that were fallout from the larger documentation update we did in 5.10-rc2. Nothing major here at all, but all of these have been in linux-next and resolve build warnings when building the documentation files" * tag 'driver-core-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: Documentation: remove mic/index from misc-devices/index.rst scripts: get_api.pl: Add sub-titles to ABI output scripts: get_abi.pl: Don't let ABI files to create subtitles docs: leds: index.rst: add a missing file docs: ABI: sysfs-class-net: fix a typo docs: ABI: sysfs-driver-dma-ioatdma: what starts with /sys
2020-11-08Merge tag 'tty-5.10-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are a small number of small tty and serial fixes for some reported problems for the tty core, vt code, and some serial drivers. They include fixes for: - a buggy and obsolete vt font ioctl removal - 8250_mtk serial baudrate runtime warnings - imx serial earlycon build configuration fix - txx9 serial driver error path cleanup issues - tty core fix in release_tty that can be triggered by trying to bind an invalid serial port name to a speakup console device Almost all of these have been in linux-next without any problems, the only one that hasn't, just deletes code :)" * tag 'tty-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: vt: Disable KD_FONT_OP_COPY tty: fix crash in release_tty if tty->port is not set serial: txx9: add missing platform_driver_unregister() on error in serial_txx9_init tty: serial: imx: enable earlycon by default if IMX_SERIAL_CONSOLE is enabled serial: 8250_mtk: Fix uart_get_baud_rate warning
2020-11-08Merge tag 'usb-5.10-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes and new device ids: - USB gadget fixes for some reported issues - Fixes for the ever-troublesome apple fastcharge driver, hopefully we finally have it right. - More USB core quirks for odd devices - USB serial driver fixes for some long-standing issues that were recently found - some new USB serial driver device ids All have been in linux-next with no reported issues" * tag 'usb-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: apple-mfi-fastcharge: fix reference leak in apple_mfi_fc_set_property usb: mtu3: fix panic in mtu3_gadget_stop() USB: serial: option: add Telit FN980 composition 0x1055 USB: serial: option: add LE910Cx compositions 0x1203, 0x1230, 0x1231 USB: serial: cyberjack: fix write-URB completion race USB: Add NO_LPM quirk for Kingston flash drive USB: serial: option: add Quectel EC200T module support usb: raw-gadget: fix memory leak in gadget_setup usb: dwc2: Avoid leaving the error_debugfs label unused usb: dwc3: ep0: Fix delay status handling usb: gadget: fsl: fix null pointer checking usb: gadget: goku_udc: fix potential crashes in probe usb: dwc3: pci: add support for the Intel Alder Lake-S
2020-11-08fork: fix copy_process(CLONE_PARENT) race with the exiting ->real_parentEddy Wu
current->group_leader->exit_signal may change during copy_process() if current->real_parent exits. Move the assignment inside tasklist_lock to avoid the race. Signed-off-by: Eddy Wu <eddy_wu@trendmicro.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-08vt: Disable KD_FONT_OP_COPYDaniel Vetter
It's buggy: On Fri, Nov 06, 2020 at 10:30:08PM +0800, Minh Yuan wrote: > We recently discovered a slab-out-of-bounds read in fbcon in the latest > kernel ( v5.10-rc2 for now ). The root cause of this vulnerability is that > "fbcon_do_set_font" did not handle "vc->vc_font.data" and > "vc->vc_font.height" correctly, and the patch > <https://lkml.org/lkml/2020/9/27/223> for VT_RESIZEX can't handle this > issue. > > Specifically, we use KD_FONT_OP_SET to set a small font.data for tty6, and > use KD_FONT_OP_SET again to set a large font.height for tty1. After that, > we use KD_FONT_OP_COPY to assign tty6's vc_font.data to tty1's vc_font.data > in "fbcon_do_set_font", while tty1 retains the original larger > height. Obviously, this will cause an out-of-bounds read, because we can > access a smaller vc_font.data with a larger vc_font.height. Further there was only one user ever. - Android's loadfont, busybox and console-tools only ever use OP_GET and OP_SET - fbset documentation only mentions the kernel cmdline font: option, not anything else. - systemd used OP_COPY before release 232 published in Nov 2016 Now unfortunately the crucial report seems to have gone down with gmane, and the commit message doesn't say much. But the pull request hints at OP_COPY being broken https://github.com/systemd/systemd/pull/3651 So in other words, this never worked, and the only project which foolishly every tried to use it, realized that rather quickly too. Instead of trying to fix security issues here on dead code by adding missing checks, fix the entire thing by removing the functionality. Note that systemd code using the OP_COPY function ignored the return value, so it doesn't matter what we're doing here really - just in case a lone server somewhere happens to be extremely unlucky and running an affected old version of systemd. The relevant code from font_copy_to_all_vcs() in systemd was: /* copy font from active VT, where the font was uploaded to */ cfo.op = KD_FONT_OP_COPY; cfo.height = vcs.v_active-1; /* tty1 == index 0 */ (void) ioctl(vcfd, KDFONTOP, &cfo); Note this just disables the ioctl, garbage collecting the now unused callbacks is left for -next. v2: Tetsuo found the old mail, which allowed me to find it on another archive. Add the link too. Acked-by: Peilin Ye <yepeilin.cs@gmail.com> Reported-by: Minh Yuan <yuanmingbuaa@gmail.com> References: https://lists.freedesktop.org/archives/systemd-devel/2016-June/036935.html References: https://github.com/systemd/systemd/pull/3651 Cc: Greg KH <greg@kroah.com> Cc: Peilin Ye <yepeilin.cs@gmail.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://lore.kernel.org/r/20201108153806.3140315-1-daniel.vetter@ffwll.ch Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-08Merge tag 'xfs-5.10-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds
Pull xfs fixes from Darrick Wong: - Fix an uninitialized struct problem - Fix an iomap problem zeroing unwritten EOF blocks - Fix some clumsy error handling when writeback fails on filesystems with blocksize < pagesize - Fix a retry loop not resetting loop variables properly - Fix scrub flagging rtinherit inodes on a non-rt fs, since the kernel actually does permit that combination - Fix excessive page cache flushing when unsharing part of a file * tag 'xfs-5.10-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: only flush the unshared range in xfs_reflink_unshare xfs: fix scrub flagging rtinherit even if there is no rt device xfs: fix missing CoW blocks writeback conversion retry iomap: clean up writeback state logic on writepage error iomap: support partial page discard on writeback block mapping failure xfs: flush new eof page on truncate to avoid post-eof corruption xfs: set xefi_discard when creating a deferred agfl free log intent item
2020-11-08Merge branch 'hch' (patches from Christoph)Linus Torvalds
Merge procfs splice read fixes from Christoph Hellwig: "Greg reported a problem due to the fact that Android tests use procfs files to test splice, which stopped working with the changes for set_fs() removal. This series adds read_iter support for seq_file, and uses those for various proc files using seq_file to restore splice read support" [ Side note: Christoph initially had a scripted "move everything over" patch, which looks fine, but I personally would prefer us to actively discourage splice() on random files. So this does just the minimal basic core set of proc file op conversions. For completeness, and in case people care, that script was sed -i -e 's/\.proc_read\(\s*=\s*\)seq_read/\.proc_read_iter\1seq_read_iter/g' but I'll wait and see if somebody has a strong argument for using splice on random small /proc files before I'd run it on the whole kernel. - Linus ] * emailed patches from Christoph Hellwig <hch@lst.de>: proc "seq files": switch to ->read_iter proc "single files": switch to ->read_iter proc/stat: switch to ->read_iter proc/cpuinfo: switch to ->read_iter proc: wire up generic_file_splice_read for iter ops seq_file: add seq_read_iter
2020-11-08Merge tag 'x86-urgent-2020-11-08' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of x86 fixes: - Use SYM_FUNC_START_WEAK in the mem* ASM functions instead of a combination of .weak and SYM_FUNC_START_LOCAL which makes LLVMs integrated assembler upset - Correct the mitigation selection logic which prevented the related prctl to work correctly - Make the UV5 hubless system work correctly by fixing up the malformed table entries and adding the missing ones" * tag 'x86-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/platform/uv: Recognize UV5 hubless system identifier x86/platform/uv: Remove spaces from OEM IDs x86/platform/uv: Fix missing OEM_TABLE_ID x86/speculation: Allow IBPB to be conditionally enabled on CPUs with always-on STIBP x86/lib: Change .weak to SYM_FUNC_START_WEAK for arch/x86/lib/mem*_64.S
2020-11-08Merge tag 'perf-urgent-2020-11-08' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fix from Thomas Gleixner: "A single fix for the perf core plugging a memory leak in the address filter parser" * tag 'perf-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Fix a memory leak in perf_event_parse_addr_filter()
2020-11-08Merge tag 'locking-urgent-2020-11-08' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull futex fix from Thomas Gleixner: "A single fix for the futex code where an intermediate state in the underlying RT mutex was not handled correctly and triggering a BUG() instead of treating it as another variant of retry condition" * tag 'locking-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Handle transient "ownerless" rtmutex state correctly
2020-11-08Merge tag 'irq-urgent-2020-11-08' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A set of fixes for interrupt chip drivers: - Fix the fallout of the IPI as interrupt conversion in Kconfig and the BCM2836 interrupt chip driver - Fixes for interrupt affinity setting and the handling of hierarchical irq domains in the SiFive PLIC driver - Make the unmapped event handling in the TI SCI driver work correctly - A few minor fixes and cleanups in various chip drivers and Kconfig" * tag 'irq-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: dt-bindings: irqchip: ti, sci-inta: Fix diagram indentation for unmapped events irqchip/ti-sci-inta: Add support for unmapped event handling dt-bindings: irqchip: ti, sci-inta: Update for unmapped event handling irqchip/renesas-intc-irqpin: Merge irlm_bit and needs_irlm irqchip/sifive-plic: Fix chip_data access within a hierarchy irqchip/sifive-plic: Fix broken irq_set_affinity() callback irqchip/stm32-exti: Add all LP timer exti direct events support irqchip/bcm2836: Fix missing __init annotation irqchip/mips: Drop selection of IRQ_DOMAIN_HIERARCHY irqchip/mst: Make mst_intc_of_init static irqchip/mst: MST_IRQ should depend on ARCH_MEDIATEK or ARCH_MSTARV7 genirq: Let GENERIC_IRQ_IPI select IRQ_DOMAIN_HIERARCHY
2020-11-08Merge tag 'core-urgent-2020-11-08' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull entry code fix from Thomas Gleixner: "A single fix for the generic entry code to correct the wrong assumption that the lockdep interrupt state needs not to be established before calling the RCU check" * tag 'core-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: entry: Fix the incorrect ordering of lockdep and RCU check
2020-11-08Merge tag 'powerpc-5.10-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - fix miscompilation with GCC 4.9 by using asm_goto_volatile for put_user() - fix for an RCU splat at boot caused by a recent lockdep change - fix for a possible deadlock in our EEH debugfs code - several fixes for handling of _PAGE_ACCESSED on 32-bit platforms - build fix when CONFIG_NUMA=n Thanks to Andreas Schwab, Christophe Leroy, Oliver O'Halloran, Qian Cai, and Scott Cheloha. * tag 'powerpc-5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/numa: Fix build when CONFIG_NUMA=n powerpc/8xx: Manage _PAGE_ACCESSED through APG bits in L1 entry powerpc/8xx: Always fault when _PAGE_ACCESSED is not set powerpc/40x: Always fault when _PAGE_ACCESSED is not set powerpc/603: Always fault when _PAGE_ACCESSED is not set powerpc: Use asm_goto_volatile for put_user() powerpc/smp: Call rcu_cpu_starting() earlier powerpc/eeh_cache: Fix a possible debugfs deadlock
2020-11-08iio: light: fix kconfig dependency bug for VCNL4035Necip Fazil Yildiran
When VCNL4035 is enabled and IIO_BUFFER is disabled, it results in the following Kbuild warning: WARNING: unmet direct dependencies detected for IIO_TRIGGERED_BUFFER Depends on [n]: IIO [=y] && IIO_BUFFER [=n] Selected by [y]: - VCNL4035 [=y] && IIO [=y] && I2C [=y] The reason is that VCNL4035 selects IIO_TRIGGERED_BUFFER without depending on or selecting IIO_BUFFER while IIO_TRIGGERED_BUFFER depends on IIO_BUFFER. This can also fail building the kernel. Honor the kconfig dependency to remove unmet direct dependency warnings and avoid any potential build failures. Fixes: 55707294c4eb ("iio: light: Add support for vishay vcnl4035") Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=209883 Link: https://lore.kernel.org/r/20201102223523.572461-1-fazilyildiran@gmail.com Cc: <stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-11-08iio/adc: ingenic: Fix AUX/VBAT readings when touchscreen is usedPaul Cercueil
When the command feature of the ADC is used, it is possible to program the ADC, and specify at each step what input should be processed, and in comparison to what reference. This broke the AUX and battery readings when the touchscreen was enabled, most likely because the CMD feature would change the VREF all the time. Now, when AUX or battery are read, we temporarily disable the CMD feature, which means that we won't get touchscreen readings in that time frame. But it now gives correct values for AUX / battery, and the touchscreen isn't disabled for long enough to be an actual issue. Fixes: b96952f498db ("IIO: Ingenic JZ47xx: Add touchscreen mode.") Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Artur Rojek <contact@artur-rojek.eu> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201103201238.161083-1-paul@crapouillou.net Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-11-08iio/adc: ingenic: Fix battery VREF for JZ4770 SoCPaul Cercueil
The reference voltage for the battery is clearly marked as 1.2V in the programming manual. With this fixed, the battery channel now returns correct values. Fixes: a515d6488505 ("IIO: Ingenic JZ47xx: Add support for JZ4770 SoC ADC.") Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Artur Rojek <contact@artur-rojek.eu> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201104192843.67187-1-paul@crapouillou.net Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-11-08KVM: selftests: Introduce the dirty log perf testBen Gardon
The dirty log perf test will time verious dirty logging operations (enabling dirty logging, dirtying memory, getting the dirty log, clearing the dirty log, and disabling dirty logging) in order to quantify dirty logging performance. This test can be used to inform future performance improvements to KVM's dirty logging infrastructure. This series was tested by running the following invocations on an Intel Skylake machine: dirty_log_perf_test -b 20m -i 100 -v 64 dirty_log_perf_test -b 20g -i 5 -v 4 dirty_log_perf_test -b 4g -i 5 -v 32 demand_paging_test -b 20m -v 64 demand_paging_test -b 20g -v 4 demand_paging_test -b 4g -v 32 All behaved as expected. Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20201027233733.1484855-6-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-08KVM: selftests: Make the number of vcpus globalAndrew Jones
We also check the input number of vcpus against the maximum supported. Signed-off-by: Andrew Jones <drjones@redhat.com> Message-Id: <20201104212357.171559-8-drjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-08KVM: selftests: Make the per vcpu memory size globalAndrew Jones
Rename vcpu_memory_bytes to something with "percpu" in it in order to be less ambiguous. Also make it global to simplify things. Signed-off-by: Andrew Jones <drjones@redhat.com> Message-Id: <20201104212357.171559-7-drjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-08KVM: selftests: Drop pointless vm_create wrapperAndrew Jones
Signed-off-by: Andrew Jones <drjones@redhat.com> Message-Id: <20201104212357.171559-3-drjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-08KVM: selftests: Add wrfract to common guest codeBen Gardon
Wrfract will be used by the dirty logging perf test introduced later in this series to dirty memory sparsely. This series was tested by running the following invocations on an Intel Skylake machine: dirty_log_perf_test -b 20m -i 100 -v 64 dirty_log_perf_test -b 20g -i 5 -v 4 dirty_log_perf_test -b 4g -i 5 -v 32 demand_paging_test -b 20m -v 64 demand_paging_test -b 20g -v 4 demand_paging_test -b 4g -v 32 All behaved as expected. Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20201027233733.1484855-5-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-08KVM: selftests: Simplify demand_paging_test with timespec_diff_nowBen Gardon
Add a helper function to get the current time and return the time since a given start time. Use that function to simplify the timekeeping in the demand paging test. This series was tested by running the following invocations on an Intel Skylake machine: dirty_log_perf_test -b 20m -i 100 -v 64 dirty_log_perf_test -b 20g -i 5 -v 4 dirty_log_perf_test -b 4g -i 5 -v 32 demand_paging_test -b 20m -v 64 demand_paging_test -b 20g -v 4 demand_paging_test -b 4g -v 32 All behaved as expected. Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20201027233733.1484855-4-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-08KVM: selftests: Remove address rounding in guest codeBen Gardon
Rounding the address the guest writes to a host page boundary will only have an effect if the host page size is larger than the guest page size, but in that case the guest write would still go to the same host page. There's no reason to round the address down, so remove the rounding to simplify the demand paging test. This series was tested by running the following invocations on an Intel Skylake machine: dirty_log_perf_test -b 20m -i 100 -v 64 dirty_log_perf_test -b 20g -i 5 -v 4 dirty_log_perf_test -b 4g -i 5 -v 32 demand_paging_test -b 20m -v 64 demand_paging_test -b 20g -v 4 demand_paging_test -b 4g -v 32 All behaved as expected. Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20201027233733.1484855-3-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-08KVM: selftests: Factor code out of demand_paging_testBen Gardon
Much of the code in demand_paging_test can be reused by other, similar multi-vCPU-memory-touching-perfromance-tests. Factor that common code out for reuse. No functional change expected. This series was tested by running the following invocations on an Intel Skylake machine: dirty_log_perf_test -b 20m -i 100 -v 64 dirty_log_perf_test -b 20g -i 5 -v 4 dirty_log_perf_test -b 4g -i 5 -v 32 demand_paging_test -b 20m -v 64 demand_paging_test -b 20g -v 4 demand_paging_test -b 4g -v 32 All behaved as expected. Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20201027233733.1484855-2-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-08KVM: selftests: Use a single binary for dirty/clear log testPeter Xu
Remove the clear_dirty_log test, instead merge it into the existing dirty_log_test. It should be cleaner to use this single binary to do both tests, also it's a preparation for the upcoming dirty ring test. The default behavior will run all the modes in sequence. Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20201001012233.6013-1-peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-08KVM: selftests: Always clear dirty bitmap after iterationPeter Xu
We used not to clear the dirty bitmap before because KVM_GET_DIRTY_LOG would overwrite it the next time it copies the dirty log onto it. In the upcoming dirty ring tests we'll start to fetch dirty pages from a ring buffer, so no one is going to clear the dirty bitmap for us. Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20201001012228.5916-1-peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-08KVM: selftests: Add blessed SVE registers to get-reg-listAndrew Jones
Add support for the SVE registers to get-reg-list and create a new test, get-reg-list-sve, which tests them when running on a machine with SVE support. Signed-off-by: Andrew Jones <drjones@redhat.com> Message-Id: <20201029201703.102716-5-drjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-08KVM: selftests: Add aarch64 get-reg-list testAndrew Jones
Check for KVM_GET_REG_LIST regressions. The blessed list was created by running on v4.15 with the --core-reg-fixup option. The following script was also used in order to annotate system registers with their names when possible. When new system registers are added the names can just be added manually using the same grep. while read reg; do if [[ ! $reg =~ ARM64_SYS_REG ]]; then printf "\t$reg\n" continue fi encoding=$(echo "$reg" | sed "s/ARM64_SYS_REG(//;s/),//") if ! name=$(grep "$encoding" ../../../../arch/arm64/include/asm/sysreg.h); then printf "\t$reg\n" continue fi name=$(echo "$name" | sed "s/.*SYS_//;s/[\t ]*sys_reg($encoding)$//") printf "\t$reg\t/* $name */\n" done < <(aarch64/get-reg-list --core-reg-fixup --list) Signed-off-by: Andrew Jones <drjones@redhat.com> Message-Id: <20201029201703.102716-3-drjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-08selftests: kvm: test enforcement of paravirtual cpuid featuresOliver Upton
Add a set of tests that ensure the guest cannot access paravirtual msrs and hypercalls that have been disabled in the KVM_CPUID_FEATURES leaf. Expect a #GP in the case of msr accesses and -KVM_ENOSYS from hypercalls. Cc: Jim Mattson <jmattson@google.com> Signed-off-by: Oliver Upton <oupton@google.com> Reviewed-by: Peter Shier <pshier@google.com> Reviewed-by: Aaron Lewis <aaronlewis@google.com> Message-Id: <20201027231044.655110-7-oupton@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-08selftests: kvm: Add exception handling to selftestsAaron Lewis
Add the infrastructure needed to enable exception handling in selftests. This allows any of the exception and interrupt vectors to be overridden in the guest. Signed-off-by: Aaron Lewis <aaronlewis@google.com> Reviewed-by: Alexander Graf <graf@amazon.com> Message-Id: <20201012194716.3950330-4-aaronlewis@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-08selftests: kvm: Clear uc so UCALL_NONE is being properly reportedAaron Lewis
Ensure the out value 'uc' in get_ucall() is properly reporting UCALL_NONE if the call fails. The return value will be correctly reported, however, the out parameter 'uc' will not be. Clear the struct to ensure the correct value is being reported in the out parameter. Signed-off-by: Aaron Lewis <aaronlewis@google.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Alexander Graf <graf@amazon.com> Message-Id: <20201012194716.3950330-3-aaronlewis@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-13 23:16:12 +0000