summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-03-16powerpc/85xx: Refactor mpc8548cds device treeZhao Chenhui
* Create mpc8548cds.dtsi * Move lbc, soc and pci0 nodes to mpc8548cds_32b.dtsi * Change cuImage.mpc8548cds to cuImage.mpc8548cds_32b * Rename mpc8548cds.dts to mpc8548cds_32b.dts Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-03-16powerpc/85xx: mpc8548cds - Add FPGA node to dtschenhui zhao
Remove FPGA(CADMUS) macros in code. Move it to dts. Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-03-16powerpc/85xx: mpc8548cds - fix alias in mpc8548si-pre.dtsiZhao Chenhui
Correct ethernet1 and add ethernet2 and ethernet3. Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-03-16powerpc/85xx: mpc8548cds - Add RapidIO node to dtschenhui zhao
Enable RapidIO and add rapidio and rmu nodes to dts. Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-03-16powerpc/85xx: mpc8548cds - Add NOR flash node to dtschenhui zhao
Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-03-16powerpc/85xx: mpc85xxcds - Fix PCI I/O space resource of PCI bridgechenhui zhao
There is a PCI bridge(Tsi310) between the MPC8548 and a VIA southbridge chip. The bootloader sets the PCI bridge to open a window from 0x0000 to 0x1fff on the PCI I/O space. But the kernel can't set the I/O resource. In the routine pci_read_bridge_io(), if the base which is read from PCI_IO_BASE is equal to zero, the routine don't set the I/O resource of the child bus. To allow the legacy I/O space on the VIA southbridge to be accessed, use the fixup to fix the PCI I/O space of the PCI bridge. Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-03-16Merge branch 'pm-domains'Rafael J. Wysocki
* pm-domains: PM / shmobile: Make MTU2 driver use pm_genpd_dev_always_on() PM / shmobile: Make CMT driver use pm_genpd_dev_always_on() PM / shmobile: Make TMU driver use pm_genpd_dev_always_on() PM / Domains: Introduce "always on" device flag PM / Domains: Fix hibernation restore of devices, v2 PM / Domains: Fix handling of wakeup devices during system resume
2012-03-16Merge branch 'pm-sleep'Rafael J. Wysocki
* pm-sleep: PM / Sleep: JBD and JBD2 missing set_freezable()
2012-03-16Merge branch 'pm-qos'Rafael J. Wysocki
* pm-qos: sh_mmcif / PM: Use PM QoS latency constraint tmio_mmc / PM: Use PM QoS latency constraint PM / QoS: Make it possible to expose PM QoS latency constraints
2012-03-16PM / shmobile: Make MTU2 driver use pm_genpd_dev_always_on()Rafael J. Wysocki
Make the MTU2 clocksource driver mark its device as "always on" using pm_genpd_dev_always_on() to protect it from surprise power removals. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Paul Mundt <lethal@linux-sh.org> Cc: stable@vger.kernel.org
2012-03-16PM / shmobile: Make CMT driver use pm_genpd_dev_always_on()Rafael J. Wysocki
Make the CMT clocksource driver mark its device as "always on" using pm_genpd_dev_always_on() to protect it from surprise power removals. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Paul Mundt <lethal@linux-sh.org> Cc: stable@vger.kernel.org
2012-03-16PM / shmobile: Make TMU driver use pm_genpd_dev_always_on()Rafael J. Wysocki
Make the TMU clocksource driver mark its device as "always on" using pm_genpd_dev_always_on() to protect it from surprise power removals and make sh7372_add_standard_devices() add TMU devices on sh7372 to the A4R power domain so that their "always on" flags are taken into account as appropriate. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Paul Mundt <lethal@linux-sh.org> Cc: stable@vger.kernel.org
2012-03-16PM / Domains: Introduce "always on" device flagRafael J. Wysocki
The TMU device on the Mackerel board belongs to the A4R power domain and loses power when the domain is turned off. Unfortunately, the TMU driver is not prepared to cope with such situations and crashes the system when that happens. To work around this problem introduce a new helper function, pm_genpd_dev_always_on(), allowing a device driver to mark its device as "always on" in case it belongs to a PM domain, which will make the generic PM domains core code avoid powering off the domain containing the device, both at run time and during system suspend. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Paul Mundt <lethal@linux-sh.org> Cc: stable@vger.kernel.org
2012-03-16PM / Domains: Fix hibernation restore of devices, v2Rafael J. Wysocki
During resume from hibernation pm_genpd_restore_noirq() should only power off domains whose suspend_power_off flags are set once and not every time it is called for a device in the given domain. Moreover, it shouldn't decrement genpd->suspended_count, because that field is not touched during device freezing and therefore it is always equal to 0 when pm_genpd_restore_noirq() runs for the first device in the given domain. This means pm_genpd_restore_noirq() may use genpd->suspended_count to determine whether or not it it has been called for the domain in question already in this cycle (it only needs to increment that field every time it runs for this purpose) and whether or not it should check if the domain needs to be powered off. For that to work, though, pm_genpd_prepare() has to clear genpd->suspended_count when it runs for the first device in the given domain (in which case that flag need not be cleared during domain initialization). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: stable@vger.kernel.org
2012-03-16PM / Domains: Fix handling of wakeup devices during system resumeRafael J. Wysocki
During system suspend pm_genpd_suspend_noirq() checks if the given device is in a wakeup path (i.e. it appears to be needed for one or more wakeup devices to work or is a wakeup device itself) and if it needs to be "active" for wakeup to work. If that is the case, the function returns 0 without incrementing the device domain's counter of suspended devices and without executing genpd_stop_dev() for the device. In consequence, the device is not stopped (e.g. its clock isn't disabled) and power is always supplied to its domain in the resulting system sleep state. However, pm_genpd_resume_noirq() doesn't repeat that check and it runs genpd_start_dev() and decrements the domain's counter of suspended devices even for the wakeup device that weren't stopped by pm_genpd_suspend_noirq(). As a result, the start callback may be run unnecessarily for them and their domains' counters of suspended devices may become negative. Both outcomes aren't desirable, so fix pm_genpd_resume_noirq() to look for wakeup devices that might not be stopped by during system suspend. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: Simon Horman <horms@verge.net.au> Cc: stable@vger.kernel.org
2012-03-16net: qmi_wwan: add support for ZTE MF820DBjørn Mork
ZTE have yet to discover the magic of USB descriptors. These devices use ff/ff/ff for class/subclass/protocol regardless of function, except for usb-storage. Use an interface number whitelist to force the driver to bind only to the QMI/wwan interface. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-16Tools: hv: Support enumeration from all the poolsK. Y. Srinivasan
We have only supported enumeration only from the AUTO pool. Now support enumeration from all the available pools. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-16Tools: hv: Fully support the new KVP verbs in the user level daemonK. Y. Srinivasan
Now fully support the new KVP messages in the user level daemon. Hyper-V defines multiple persistent pools to which the host can write/read/modify KVP tuples. In this patch we implement a file for each specified pool, where the KVP tuples will be stored in the guest. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-16Drivers: hv: Support the newly introduced KVP messages in the driverK. Y. Srinivasan
Support the newly defined KVP message types. It turns out that the host pushes a set of standard key value pairs as soon as the guest opens the KVP channel. Since we cannot handle these tuples until the user level daemon loads up, defer reading the KVP channel until the user level daemon is launched. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-16USB: option: add ZTE MF820DBjørn Mork
This device presents a total of 5 interfaces with ff/ff/ff class/subclass/protocol. The last one of these is verified to be a QMI/wwan combined interface which should be handled by the qmi_wwan driver, so we blacklist it here. Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-16usb: gadget: f_fs: Remove lock is held before freeing checksAndi Kleen
lock debugging already supports this, no need to do it explicitely. Cc: balbi@ti.com Cc: gregkh@linuxfoundation.org Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-16USB: option: make interface blacklist work againBjørn Mork
commit 0d905fd "USB: option: convert Huawei K3765, K4505, K4605 reservered interface to blacklist" accidentally ANDed two blacklist tests by leaving out a return. This was not noticed because the two consecutive bracketless if statements made it syntactically correct. Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: <stable@vger.kernel.org> # 3.2.y, 3.3.y Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-16usb/ub: deprecate & schedule for removal the "Low Performance USB Block" driverSebastian Andrzej Siewior
Deprecate this driver. All devices which can be handled by this driver can also be handled by the usb-storage driver. Acked-By: Pete Zaitcev <zaitcev@redhat.com> Cc: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-16x86, efi: Fix pointer math issue in handle_ramdisks()Dan Carpenter
"filename" is a efi_char16_t string so this check for reaching the end of the array doesn't work. We need to cast the pointer to (u8 *) before doing the math. This patch changes the "filename" to "filename_16" to avoid confusion in the future. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: http://lkml.kernel.org/r/20120305180614.GA26880@elgon.mountain Acked-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-03-16powerpc/85xx: Add Quicc Engine support for p1025rdbZhicheng Fan
Signed-off-by: Zhicheng Fan <b32736@freescale.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-03-16powerpc/85xx: Abstract common define of signal multiplex control for qeZhicheng Fan
The mpc85xx_rdb and mpc85xx_mds have commom define of signal multiplex for qe, so they need to go in common header, the patch abstract them to fsl_guts.h Signed-off-by: Zhicheng Fan <b32736@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-03-16powerpc/85xx: allow CONFIG_PHYS_64BIT to be selectableTimur Tabi
Remove the "select PHYS_64BIT" from the Kconfig entry for the P1022DS, so that large physical address support is a selectable option for non-CoreNet reference boards. The option is enabled in mpc85xx_[smp_]defconfig so that the default is unchanged. However, now it can be deselected. The P1022DS had this option defined because the default device tree for this board uses 36-bit addresses. This had the side-effect of forcing this option on for all boards that use mpc85xx_[smp_]defconfig. Some users may want to disable this feature to create an optimized configuration for boards with <= 2GB of RAM. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-03-16powerpc/85xx: l2sram - Add compatible entry for mpc8548 L2 controllerchenhui zhao
Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-03-16powerpc/dts: fix the compatible string of sec 4.0Liu Shuo
Fix the compatible string of sec 4.0 to match with CAAM driver according to Documentation/devicetree/bindings/crypto/fsl-sec4.txt Signed-off-by: Liu Shuo <shuo.liu@freescale.com> Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-03-16powerpc/85xx: Add missing config option for CACHE SRAM codeClaudiu Manoil
fsl_85xx_l2ctlr.o and fsl_85xx_cache_sram.o are built only if CONFIG_FSL_85XX_CACHE_SRAM is defined. The driver that qualifies and wants to make use of the CACHE SRAM's exported API (i.e. a freescale net driver) should (be able to) select this config option. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-03-16powerpc/85xx: Fix compiler error with THIS_MODULE and relatedClaudiu Manoil
CC arch/powerpc/sysdev/fsl_85xx_l2ctlr.o arch/powerpc/sysdev/fsl_85xx_l2ctlr.c:209:13: error: 'THIS_MODULE' undeclared here (not in a function) arch/powerpc/sysdev/fsl_85xx_l2ctlr.c:229:20: error: expected declaration specifiers or '...' before string constant cc1: warnings being treated as errors arch/powerpc/sysdev/fsl_85xx_l2ctlr.c:229:1: error: data definition has no type or storage class arch/powerpc/sysdev/fsl_85xx_l2ctlr.c:229:1: error: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' arch/powerpc/sysdev/fsl_85xx_l2ctlr.c:229:20: error: function declaration isn't a prototype arch/powerpc/sysdev/fsl_85xx_l2ctlr.c:230:16: error: expected declaration specifiers or '...' before string constant arch/powerpc/sysdev/fsl_85xx_l2ctlr.c:230:1: error: data definition has no type or storage class arch/powerpc/sysdev/fsl_85xx_l2ctlr.c:230:1: error: type defaults to 'int' in declaration of 'MODULE_LICENSE' arch/powerpc/sysdev/fsl_85xx_l2ctlr.c:230:16: error: function declaration isn't a prototype make[1]: *** [arch/powerpc/sysdev/fsl_85xx_l2ctlr.o] Error 1 ... CC arch/powerpc/sysdev/fsl_85xx_cache_sram.o cc1: warnings being treated as errors arch/powerpc/sysdev/fsl_85xx_cache_sram.c:69:1: error: data definition has no type or storage class arch/powerpc/sysdev/fsl_85xx_cache_sram.c:69:1: error: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' arch/powerpc/sysdev/fsl_85xx_cache_sram.c:69:1: error: parameter names (without types) in function declaration arch/powerpc/sysdev/fsl_85xx_cache_sram.c:80:1: error: data definition has no type or storage class arch/powerpc/sysdev/fsl_85xx_cache_sram.c:80:1: error: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' arch/powerpc/sysdev/fsl_85xx_cache_sram.c:80:1: error: parameter names (without types) in function declaration make[1]: *** [arch/powerpc/sysdev/fsl_85xx_cache_sram.o] Error 1 Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-03-16powerpc/83xx: mpc836x - fix failed phy detection for ucc ethernet on MDSPaul Gortmaker
The mpc836x_mds platform has been broken since the commit 6fe3264945ee63292cdfb27b6e95bc52c603bb09 "netdev/phy: Use mdiobus_read() so that proper locks are taken" which caused the fsl_pq_mdio TBI autoprobe to oops. The oops was "fixed" in commit 28d8ea2d568534026ccda3e8936f5ea1e04a86a1 "fsl_pq_mdio: Clean up tbi address configuration" by simply removing the the autoscan code, and making tbi nodes mandatory. Some of the newer reference platforms were updated to have tbi nodes in 220669495bf8b68130a8218607147c7b74c28d2b "powerpc: Add TBI PHY node to first MDIO bus" but the older mpc836x didn't get one and hence was just failing with -EBUSY as follows: fsl-pq_mdio: probe of e0102120.mdio failed with error -16 ... net eth0: Could not attach to PHY eth0: Cannot initialize PHY, aborting. Add a TBI node and use the 1st free address for it. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-03-16regulator: Fix up a confusing dev_warn when DT lookup failsRajendra Nayak
of_parse_phandle() returns NULL either if the property name itself does not exist or if it (exists and) does not reference a valid phandle. Giving out a warn like the one below (that the property references an invalid phandle) can be confusing when the property itself does not exist in the node. Fix it with a more sensible message and make it a dev_dbg instead of a dev_warn. Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-16Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/ath/ath9k/hw.c
2012-03-16powerpc/85xx: p1022ds: enable monitor switching via pixis indirect modeTimur Tabi
When the P1022's DIU video controller is active, the pixis must be accessed in "indirect" mode, which uses localbus chip select addresses. Switching between the DVI and LVDS monitor ports is handled by the pixis, so that switching needs to be done via indirect mode. This has the side-effect of no longer requiring U-Boot to enable the DIU. Now Linux can enable the DIU all by itself. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-03-16powerpc/85xx: Board support for GE IMP3AMartyn Welch
Initial board support for the GE IMP3A, a 3U compactPCI card with a p2020 processor. Signed-off-by: Martyn Welch <martyn.welch@ge.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-03-16powerpc: Move GE PIC driversMartyn Welch
Move the GE PIC drivers to allow these to be used by non-86xx boards. Signed-off-by: Martyn Welch <martyn.welch@ge.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-03-16gpio: Move GE GPIO driver to reside within GPIO subsystemMartyn Welch
The GE GPIO driver provides basic support (set direction, read/write state) for the GPIO provided on some GE single board computers. This patch moves the driver from the 86xx specific platform directrory to the GPIO subsystem so that it can be used on non-86xx boards. Signed-off-by: Martyn Welch <martyn.welch@ge.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-03-16powerpc: Add GE FPGA config optionMartyn Welch
This patch adds the GE_FPGA configuration option. This is being carried out as ground work to allow the PIC and GPIO drivers to be move from the powerpc 86xx platform directory to more general locations to allow them to be used on non-86xx boards and to reduce churn when further boards using these drivers are added. Signed-off-by: Martyn Welch <martyn.welch@ge.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-03-16powerpc/85xx: Add dts for p1020rdb-pc boardZhicheng Fan
P1020RDB-PC Overview ------------------ 1Gbyte DDR3 SDRAM 32 Mbyte NAND flash 10 16Mbyte NOR flash 16 Mbyte SPI flash SD connector to interface with the SD memory card Real-time clock on I2C bus PCIe: - x1 PCIe slot - x1 mini-PCIe slot 10/100/1000 BaseT Ethernet ports: - eTSEC1, RGMII: one 10/100/1000 port using VitesseTM VSC7385 L2 switch - eTSEC2, SGMII: one 10/100/1000 port using VitesseTM VSC8221 - eTSEC3, RGMII: one 10/100/1000 port using AtherosTM AR8021 USB 2.0 port: - Two USB2.0 Type A receptacles - One USB2.0 signal to Mini PCIe slot Dual RJ45 UART ports: - DUART interface: supports two UARTs up to 115200 bps for console display Signed-off-by: Zhicheng Fan <b32736@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-03-16powerpc/85xx: Add p1020rdb-pc platform supportZhicheng Fan
Signed-off-by: Zhicheng Fan <b32736@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-03-16powerpc/85xx: add P1020UTM-PC platform supportJerry Huang
The p1020utm-pc has the similar feature as the p1020rdb. Therefore, p1020utm-pc use the same platform file as the p1/p2 rdb board. Overview of P1020UTM-PC platform: - DDR3 1GB - NOR flash 32MB - I2C EEPROM 256Kb - eTSEC1 (RGMII PHY Atheros AR8021) - eTSEC2 (SGMII PHY Vitesse VSC8221) - eTSEC3 (RGMII PHY Atheros AR8021) - SDHC - 2 USB ports - PCIe (Lane1 to dual SATA controller) Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-03-16powerpc/85xx: add P1020MBG-PC platform supportJerry Huang
The p1020mbg-pc has the similar feature as the p1020rdb. Therefore, p1020mbg-pc use the same platform file as the p1/p2 rdb board. Overview of P1020MBG-PC platform: - DDR3 2GB - NOR flash 64MB - I2C EEPROM 256Kb - eTSEC1 (RGMII PHY) connected to VSC7385 L2 switch - eTSEC2 (SGMII PHY) - eTSEC3 (RGMII PHY) - SDHC - 2 USB ports - 4 TDM ports - PCIe (Lane1 to dual SATA controller) Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-03-16NAND Machine support for Integrated Flash ControllerPrabhakar Kushwaha
Integrated Flash Controller(IFC) can be used to hook NAND Flash chips using NAND Flash Machine available on it. Signed-off-by: Dipen Dudhat <Dipen.Dudhat@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Liu Shuo <b35362@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-03-16powerpc/85xx: Clean up partition nodes in dts for MPC8572DSJia Hongtao
Signed-off-by: Jin Qing <b24347@freescale.com> Signed-off-by: Jia Hongtao <B38951@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-03-16powerpc/85xx: p1022ds: disable the NOR flash node if video is enabledTimur Tabi
The Freescale P1022 has a unique pin muxing "feature" where the DIU video controller's video signals are muxed with 24 of the local bus address signals. When the DIU is enabled, the bulk of the local bus is disabled, preventing access to memory-mapped devices like NOR flash and the pixis FPGA. Therefore, if the DIU is going to be enabled, then memory-mapped devices on the localbus, like NOR flash, need to be disabled. This also means that the localbus is not a 'simple-bus' any more, so remove that string from the compatible node. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-03-16powerpc/85xx: create 32-bit DTS for the P1022DSTimur Tabi
Create a 32-bit address space version of p1022ds.dts. To avoid confusion, p1022ds.dts is renamed to p1022ds_36b.dts. We also create p1022ds.dtsi to store some common nodes. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-03-16powerpc/85xx: Add magic-packet properties for etsecXie Xiaobo
The properties indicates that the hardware supports waking up via magic packet. Signed-off-by: Xie Xiaobo <X.Xie@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-03-16powerpc/85xx: Add some DTS nodes and attributes for mpc8536dsXie Xiaobo
Add partitions for NOR and NAND Flash. Signed-off-by: Xie Xiaobo <X.Xie@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-03-16powerpc/fsl_msi: return proper error value when ioremap failed.Liu Shuo
Signed-off-by: Liu Shuo <soniccat.liu@gmail.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
generated by cgit (git 2.34.1) at 2025-09-13 14:52:23 +0000