| Age | Commit message (Collapse) | Author |
|---|
|
- Lengthen reset delay for VideoPropulsion Torrent QN16e card, which seems
to require longer delay than spec requires (Lukas Wunner)
* pci/reset:
PCI: Lengthen reset delay for VideoPropulsion Torrent QN16e card
|
|
- Protect driver's D3cold preference from being overwritten by user space
via sysfs (Lukas Wunner)
- Avoid PME from D3hot/D3cold for AMD Rembrandt and Phoenix USB4 to fix
wakeup by USB4-attached devices (Mario Limonciello)
* pci/pm:
x86/PCI: Avoid PME from D3hot/D3cold for AMD Rembrandt and Phoenix USB4
PCI/sysfs: Protect driver's D3cold preference from user space
|
|
- Move struct dev_pagemap (a flexible structure) to end of struct
pci_p2pdma_pagemap to avoid overwriting things after dev_pagemap
(Gustavo A. R. Silva)
* pci/p2pdma:
PCI/P2PDMA: Remove redundant goto
PCI/P2PDMA: Fix undefined behavior bug in struct pci_p2pdma_pagemap
|
|
- Add driver for Ampere Altra Attention Indicators (D Scott Phillips)
* pci/hotplug:
PCI: hotplug: Add Ampere Altra Attention Indicator extension driver
PCI: acpiphp: Allow built-in drivers for Attention Indicators
|
|
- Add and use pci_get_base_class() to search for all PCI_BASE_CLASS_DISPLAY
devices (Sui Jingfeng)
- Fix a vmd check for multi-function devices (Ilpo Järvinen)
- Add PCI_HEADER_TYPE_MFD and use it to replace literals (Ilpo Järvinen)
- Use acpi_evaluate_dsm_typed() instead of open-coding it (Andy Shevchenko)
- Keep .remove() and .probe() callbacks (previously marked __init) in case
they're used via sysfs (Uwe Kleine-König)
* pci/enumeration:
PCI: keystone: Don't discard .probe() callback
PCI: keystone: Don't discard .remove() callback
PCI: kirin: Don't discard .remove() callback
PCI: exynos: Don't discard .remove() callback
PCI/ACPI: Use acpi_evaluate_dsm_typed()
PCI: Use PCI_HEADER_TYPE_* instead of literals
PCI: Add PCI_HEADER_TYPE_MFD definition
PCI: vmd: Correct PCI Header Type Register's multi-function check
drm/radeon: Use pci_get_base_class() to reduce duplicated code
drm/amdgpu: Use pci_get_base_class() to reduce duplicated code
drm/nouveau: Use pci_get_base_class() to reduce duplicated code
ALSA: hda: Use pci_get_base_class() to reduce duplicated code
PCI: Add pci_get_base_class() helper
|
|
- Use IS_ERR_OR_NULL() helper function instead of open-coding it (Ruan
Jinjie)
* pci/endpoint:
PCI: endpoint: Use IS_ERR_OR_NULL() helper function
|
|
- Disable ATS for Intel IPU E2000 A- and B-stepping devices to avoid
invalidation message endianness erratum (Bartosz Pawlowski)
* pci/ats:
PCI: Disable ATS for specific Intel IPU E2000 devices
PCI: Extract ATS disabling to a helper function
|
|
* pci/aspm:
PCI/ASPM: Fix L1 substate handling in aspm_attr_store_common()
Revert "PCI/ASPM: Disable only ASPM_STATE_L1 when driver, disables L1"
PCI/ASPM: Convert printk() to pr_*() and add include
PCI/ASPM: Remove unnecessary includes
PCI/ASPM: Use FIELD_MAX() instead of literals
PCI/ASPM: Use time constants
PCI/ASPM: Return U32_MAX instead of bit magic construct
PCI/ASPM: Use FIELD_GET/PREP() to access PCIe capability fields
PCI: Add PCI_L1SS_CTL2 fields
|
|
- Factor out AER interrupt enable/disable (Kai-Heng Feng)
* pci/aer:
PCI/AER: Factor out interrupt toggling into helpers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Fix a possible CPU hotplug deadlock bug caused by the new TSC
synchronization code
- Fix a legacy PIC discovery bug that results in device troubles on
affected systems, such as non-working keybards, etc
- Add a new Intel CPU model number to <asm/intel-family.h>
* tag 'x86-urgent-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tsc: Defer marking TSC unstable to a worker
x86/i8259: Skip probing when ACPI/MADT advertises PCAT compatibility
x86/cpu: Add model number for Intel Arrow Lake mobile processor
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Ingo Molnar:
"Restore unintentionally lost quirk settings in the GIC irqchip driver,
which broke certain devices"
* tag 'irq-urgent-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Don't override quirk settings with default values
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fix from Ingo Molnar:
"Fix a potential NULL dereference bug"
* tag 'perf-urgent-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix potential NULL deref
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- tracing/kprobes: Fix kernel-doc warnings for the variable length
arguments
- tracing/kprobes: Fix to count the symbols in modules even if the
module name is not specified so that user can probe the symbols in
the modules without module name
* tag 'probes-fixes-v6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/kprobes: Fix symbol counting logic by looking at modules as well
tracing/kprobes: Fix the description of variable length arguments
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fix from Christoph Hellwig:
- reduce the initialy dynamic swiotlb size to remove an annoying but
harmless warning from the page allocator (Petr Tesarik)
* tag 'dma-mapping-6.6-2023-10-28' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: do not try to allocate a TLB bigger than MAX_ORDER pages
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some very small driver fixes for 6.6-final that have shown up
in the past two weeks. Included in here are:
- tiny fastrpc bugfixes for reported errors
- nvmem register fixes
- iio driver fixes for some reported problems
- fpga test fix
- MAINTAINERS file update for fpga
All of these have been in linux-next this week with no reported
problems"
* tag 'char-misc-6.6-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
fpga: Fix memory leak for fpga_region_test_class_find()
fpga: m10bmc-sec: Change contact for secure update driver
fpga: disable KUnit test suites when module support is enabled
iio: afe: rescale: Accept only offset channels
nvmem: imx: correct nregs for i.MX6ULL
nvmem: imx: correct nregs for i.MX6UL
nvmem: imx: correct nregs for i.MX6SLL
misc: fastrpc: Unmap only if buffer is unmapped from DSP
misc: fastrpc: Clean buffers on remote invocation failures
misc: fastrpc: Free DMA handles for RPC calls with no arguments
misc: fastrpc: Reset metadata buffer to avoid incorrect free
iio: exynos-adc: request second interupt only when touchscreen mode is used
iio: adc: xilinx-xadc: Correct temperature offset/scale for UltraScale
iio: adc: xilinx-xadc: Don't clobber preset voltage/temperature thresholds
dt-bindings: iio: add missing reset-gpios constrain
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Bugfixes for Axxia when it is a target and for PEC handling of
stm32f7.
Plus, fix an OF node leak pattern in the mux subsystem"
* tag 'i2c-for-6.6-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: stm32f7: Fix PEC handling in case of SMBUS transfers
i2c: muxes: i2c-mux-gpmux: Use of_get_i2c_adapter_by_node()
i2c: muxes: i2c-demux-pinctrl: Use of_get_i2c_adapter_by_node()
i2c: muxes: i2c-mux-pinctrl: Use of_get_i2c_adapter_by_node()
i2c: aspeed: Fix i2c bus hang in slave read
|
|
Add dt-bindings for ltc2991 octal i2c voltage, current and temperature
monitor.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231026103413.27800-1-antoniu.miclaus@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The MAX31785 has shown erratic behaviour across multiple system
designs, unexpectedly clock stretching and NAKing transactions.
Experimentation shows that this seems to be triggered by a register access
directly back to back with a previous register write. Experimentation also
shows that inserting a small delay after register writes makes the issue go
away.
Use a similar solution to what the max15301 driver does to solve the same
problem. Create a custom set of bus read and write functions that make sure
that the delay is added.
Signed-off-by: Lakshmi Yadlapati <lakshmiy@us.ibm.com>
Link: https://lore.kernel.org/r/20231027044346.2167548-1-lakshmiy@us.ibm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The INA237 "85-V, 16-Bit, Precision Power Monitor With I2C Interface" is
basically the same as INA328. Therefore add a corresponding compatible
to the driver.
According to the datasheet the main difference is the current and power
monitoring accuracy:
+------------------------+---------------+---------------+
| | INA238 | INA237 |
+------------------------+---------------+---------------+
| Offset voltage | +/- 5µV | +/- 50µV |
| Offset drift | +/- 0.02µV/°C | +/- 0.02µV/°C |
| Gain error | +/- 0.1% | +/- 0.3% |
| Gain error drift | +/- 25ppm/°C | +/- 50ppm/°C |
| Common mode rejection | 140dB | 120dB |
| Power accuracy | 0.7% | 1.6% |
+------------------------+---------------+---------------+
As well as the missing DEVICE_ID register at 0x3F, which is currently
not in use by the driver.
Signed-off-by: Richard Leitner <richard.leitner@linux.dev>
Link: https://lore.kernel.org/r/20231026-ina237-v2-1-dec44811a3c9@linux.dev
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add ti,ina237 binding to ti,ina2xx as they are very similar and may
share the same properties.
Signed-off-by: Richard Leitner <richard.leitner@linux.dev>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231026-ina237-v2-2-dec44811a3c9@linux.dev
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Only the temp sensors that I can verify are present.
T_Sensor is the temperature reading of a 10kΩ β=3435K NTC thermistor
optionally connected to the T_SENSOR header.
The other sensors are as found on the X670E Hero.
Signed-off-by: Ellie Hermaszewska <kernel@monoid.al>
Link: https://lore.kernel.org/r/20231026104332.906357-1-kernel@monoid.al
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add missing implementation for the max31827 supply regulator.
This is a hardware required property that is not handled.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://lore.kernel.org/r/20230925122929.10610-1-antoniu.miclaus@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The INA3221 allows the Critical alert pin to be controlled by the
summation control function. This function adds the single
shunt-voltage conversions for the desired channels in order to compare
the combined sum to the programmed limit. The Shunt-Voltage Sum Limit
register contains the programmed value that is compared to the value in
the Shunt-Voltage Sum register in order to determine if the total summed
limit is exceeded. If the shunt-voltage sum limit value is exceeded, the
Critical alert pin pulls low.
For the summation limit to have a meaningful value, we have to use the
same shunt-resistor value on all included channels. Unless equal
shunt-resistor values are used for each channel, the summation control
function cannot be used and it is not enabled by the driver.
To address this, add support to disable the summation of specific
channels via device tree property "ti,summation-disable". The channel
which has this property would be excluded from the calculation of
summation control function.
For example, summation control function calculates Shunt-Voltage Sum as:
- input_shunt_voltage_summation = input_shunt_voltage_channel1
+ input_shunt_voltage_channel2
+ input_shunt_voltage_channel3
If we want the summation to only use channel1 and channel3, we can add
'ti,summation-disable' property in device tree node for channel2. Then
the calculation will skip channel2.
- input_shunt_voltage_summation = input_shunt_voltage_channel1
+ input_shunt_voltage_channel3
Note that we only want the channel to be skipped for summation control
function rather than completely disabled. Therefore, even if we add the
property 'ti,summation-disable', the channel is still enabled and
functional.
Finally, create debugfs entries that display if summation is disabled
for each of the channels.
Signed-off-by: Rajkumar Kasirajan <rkasirajan@nvidia.com>
Signed-off-by: Ninad Malwade <nmalwade@nvidia.com>
Co-developed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20230929103650.86074-4-jonathanh@nvidia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The INA3221 has a critical alert pin that can be controlled by the
summation control function. This function adds the single
shunt-voltage conversions for the desired channels in order to
compare the combined sum to the programmed limit. The Shunt-Voltage
Sum Limit register contains the programmed value that is compared
to the value in the Shunt-Voltage Sum register in order to
determine if the total summed limit is exceeded. If the
shunt-voltage sum limit value is exceeded, the critical alert pin
pulls low.
For the summation limit to have a meaningful value, it is necessary
to use the same shunt-resistor value on all included channels. Add a new
vendor specific property, 'ti,summation-disable', to allow specific
channels to be excluded from the summation control function if the shunt
resistor is different to other channels or the channel should not be
considered for triggering the critical alert pin.
Note that the ina3221 has always supported summing the various input
channels and summation is enabled by default if the shunt-resistor
values are the same. This change simply provides a way to exclude
inputs from the summation. If this property is not populated, then the
functionality of the driver does not change.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Ninad Malwade <nmalwade@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230929103650.86074-3-jonathanh@nvidia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Convert the TI INA3221 bindings from the free-form text format to
json-schema.
Note that the INA3221 input channels default to enabled in the chip.
Unless channels are explicitly disabled in device-tree, input
channels will be enabled.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ninad Malwade <nmalwade@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230929103650.86074-2-jonathanh@nvidia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The MPQ2286 is a programmable, high frequency synchronous buck regulator
designed to power a variety of Automotive system peripherals. Single buck
converters with hardware monitoring capability is configurable over PMBus
interface.
Signed-off-by: Saravanan Sekar <saravanan@linumiz.com>
Link: https://lore.kernel.org/r/20231011164754.449399-5-saravanan@linumiz.com
[groeck: Updated subject (mpq2286 -> mpq7932)]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The bindings for single instance regulator should be named with no instance
(e.g., buck not buck0). Introduce a new helper macro to define the single pmbus
regulator.
Signed-off-by: Saravanan Sekar <saravanan@linumiz.com>
Link: https://lore.kernel.org/r/20231011164754.449399-4-saravanan@linumiz.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Document mpq2286 power-management IC.
Signed-off-by: Saravanan Sekar <saravanan@linumiz.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231011164754.449399-3-saravanan@linumiz.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Get page count using compatible match to support the series of chipsets
which differs in number of regualator/page.
Signed-off-by: Saravanan Sekar <saravanan@linumiz.com>
Link: https://lore.kernel.org/r/20231011164754.449399-2-saravanan@linumiz.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
These modify the corresponding bits in the configuration register.
adi,comp-int is a hardware property, because it affects the behavior
of the interrupt signal and whatever it is connected to.
adi,timeout-enable is a hardware property, because it affects i2c
bus operation.
Signed-off-by: Daniel Matyas <daniel.matyas@analog.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230919093456.10592-3-daniel.matyas@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
There is nothing in the datasheet indicating that the 1ms error is
needed and I didn't encounter any error during testing with 140ms wait
time.
Signed-off-by: Daniel Matyas <daniel.matyas@analog.com>
Link: https://lore.kernel.org/r/20230919093456.10592-2-daniel.matyas@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Used enums and while loops to replace switch for selecting and getting
update interval from conversion rate bits.
Divided the write_alarm_val function into 2 functions. The new function
is more generic: it can be used not only for alarm writes, but for any
kind of writes which require the device to be in shutdown mode.
Signed-off-by: Daniel Matyas <daniel.matyas@analog.com>
Link: https://lore.kernel.org/r/20230919093456.10592-1-daniel.matyas@analog.com
[groeck: Reverted error return value change (EOPNOTSUPP -> EINVAL)]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
As he is the submitter of this driver, add his mail so he can
maintain the driver and easily reply in the mailing list.
Acked-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Link: https://lore.kernel.org/r/20230928075249.109459-1-hal.feng@starfivetech.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This value was found on an ASRock X670E Taichi with an
NCT6686D chip.
Signed-off-by: Alexander Koskovich <akoskovich@pm.me>
Link: https://lore.kernel.org/r/20231023182442.21943-1-akoskovich@pm.me
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Do not allow setting shunt resistor to 0. This results in a division by
zero when performing current value computations based on input voltages
and connected resistor values.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://lore.kernel.org/r/20231011135754.13508-1-antoniu.miclaus@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
npcm7xx_pwm_config_set() can return '-ENODEV' for failed. So check
the value of 'ret' after calling npcm7xx_pwm_config_set().
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20231020085518.198477-1-suhui@nfschina.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Currently the local variable hum is being divided by a constant and
the results is being re-assigned back to hum before the value is being
returned to the caller. The assignment to hum is redundant and can
be removed.
Cleans up clang scan build warning:
drivers/hwmon/hs3001.c:65:9: warning: Although the value stored to 'hum'
is used in the enclosing expression, the value is never actually read
from 'hum' [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20231023135828.667297-1-colin.i.king@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Convert manual _UID references to use the standard ACPI helper.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Link: https://lore.kernel.org/r/20231024062018.23839-6-raag.jadav@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Use new helper acpi_use_parent_companion to simplify the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
In several drivers devices use the ACPI companion of the parent.
Add a helper for this use case to avoid code duplication.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
When adapters are chained in a sparse manner (with intermediate MFD devices,
for instance) the code currently fails to use the correct subclass for
the adapter's bus_lock which leads to false-positive lockdep warnings.
Fix this by walking the entire pedigree of the device and count all
adapters along the way instead of just checking the immediate parent.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Add kernel-doc for 'slave' and 'irq' in struct axxia_i2c_dev.
Drop kernel-doc notation ("/**") for static functions since they
are not usually documented with kernel-doc.
Prevents these kernel-doc warnings:
i2c-axxia.c:150: warning: Function parameter or member 'slave' not described in 'axxia_i2c_dev'
i2c-axxia.c:150: warning: Function parameter or member 'irq' not described in 'axxia_i2c_dev'
i2c-axxia.c:172: warning: Function parameter or member 'ns' not described in 'ns_to_clk'
i2c-axxia.c:172: warning: Function parameter or member 'clk_mhz' not described in 'ns_to_clk'
i2c-axxia.c:172: warning: No description found for return value of 'ns_to_clk'
i2c-axxia.c:271: warning: Function parameter or member 'idev' not described in 'axxia_i2c_empty_rx_fifo'
i2c-axxia.c:271: warning: No description found for return value of 'axxia_i2c_empty_rx_fifo'
i2c-axxia.c:303: warning: Function parameter or member 'idev' not described in 'axxia_i2c_fill_tx_fifo'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/all/202310181049.Vo62moV1-lkp@intel.com/
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
These should add a hyphen to indicate that it makes a adjective. Fix
them.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
ALL_INIT_TEXT_SECTIONS and ALL_EXIT_TEXT_SECTIONS are only used in
the macro definition of ALL_TEXT_SECTIONS.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Check symbol references from normal sections to init/exit sections in
a single entry.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
ALL_INIT_SECTIONS is defined as follows:
#define ALL_INIT_SECTIONS INIT_SECTIONS, ALL_XXXINIT_SECTIONS
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Theoretically, we could export conditionally-discarded code sections,
such as .meminit*, if all the users can become modular under a certain
condition. However, that would be difficult to control and such a tricky
case has never occurred.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
ALL_EXIT_SECTIONS and EXIT_SECTIONS are the same. Remove the latter.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
ALL_XXXINIT_SECTIONS and MEM_INIT_SECTIONS are the same.
Remove the latter.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
