| Age | Commit message (Collapse) | Author |
|---|
|
Make it so that a thread_with_stdio user can handle ioctls against the
file descriptor.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Create an ops structure so we can add more file-based functionality in
the next few patches.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Experimentally fix some problems with stdio_redirect_vprintf by creating
a MOO variant with which we can experiment. We can't do a GFP_KERNEL
allocation while holding the spinlock, and I don't like how the printf
function can silently truncate the output if memory allocation fails.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Create a new run_thread_with_stdout function that opens a file in
O_RDONLY mode so that the kernel can write things to userspace but
userspace cannot write to the kernel. This will be used to convey xfs
health event information to userspace.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
needed for thread_with_file; also rare but not unheard of to need this
in module code, when blocking on user input.
one workaround used by some code is wait_event_interruptible() - but
that can be buggy if the outer context isn't expecting unwinding.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: fuyuanli <fuyuanli@didiglobal.com>
|
|
This fixes stdio_redirect_read() getting stuck, not noticing that the
pipe has been closed.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
A simple example of the utility of this autocleanup approach to
handling of_node_put().
In this particular case some of the nodes needed for the test are
not available and the _available_ version would cause them to be
skipped resulting in a test failure.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240225142714.286440-4-jic23@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
handling
To avoid issues with out of order cleanup, or ambiguity about when the
auto freed data is first instantiated, do it within the for loop definition.
The disadvantage is that the struct device_node *child variable creation
is not immediately obvious where this is used.
However, in many cases, if there is another definition of
struct device_node *child; the compiler / static analysers will notify us
that it is unused, or uninitialized.
Note that, in the vast majority of cases, the _available_ form should be
used and as code is converted to these scoped handers, we should confirm
that any cases that do not check for available have a good reason not
to.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240225142714.286440-3-jic23@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The recent addition of scope based cleanup support to the kernel
provides a convenient tool to reduce the chances of leaking reference
counts where of_node_put() should have been called in an error path.
This enables
struct device_node *child __free(device_node) = NULL;
for_each_child_of_node(np, child) {
if (test)
return test;
}
with no need for a manual call of of_node_put().
A following patch will reduce the scope of the child variable to the
for loop, to avoid an issues with ordering of autocleanup, and make it
obvious when this assigned a non NULL value.
In this simple example the gains are small but there are some very
complex error handling cases buried in these loops that will be
greatly simplified by enabling early returns with out the need
for this manual of_node_put() call.
Note that there are coccinelle checks in
scripts/coccinelle/iterators/for_each_child.cocci to detect a failure
to call of_node_put(). This new approach does not cause false positives.
Longer term we may want to add scripting to check this new approach is
done correctly with no double of_node_put() calls being introduced due
to the auto cleanup. It may also be useful to script finding places
this new approach is useful.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240225142714.286440-2-jic23@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This fixes a bug where we'd return data without waiting for a newline,
if data was present but a newline was not.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Move the cleanup code to a wrapper function, where we can call it after
the thread_with_stdio fn exits.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
- eliminate the dependency on printbufs, so that we can lift
thread_with_file for use in xfs
- add a nonblocking parameter to stdio_redirect_printf(), and either
block if the buffer is full or drop it on the floor - don't buffer
infinitely
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The output buffer lock has to be a spinlock so that we can write to it
from interrupt context, so we can't use a direct copy_to_user; this
switches thread_with_file_read() to use fault_in_writeable() and
copy_to_user_nofault(), similar to how thread_with_file_write() works.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add mempool_init_kvmalloc_pool() and mempool_create_kvmalloc_pool(),
which wrap kvmalloc() instead of kmalloc() - kmalloc() with a vmalloc()
fallback.
This is part of a bcachefs cleanup - dropping an internal kvpmalloc()
helper (which predates kvmalloc()) along with mempool helpers; this
replaces the bcachefs-private kvpmalloc_pool.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Cc: linux-mm@kvack.org
|
|
The i should be signed to find out the end of the loop. Otherwise,
i >= 0 is always true and loop becomes infinite. Make its type to be
int.
Fixes: 6a9eda34418f ("mtd: spi-nor: core: set mtd->eraseregions for non-uniform erase map")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240304090103.818092-1-usama.anjum@collabora.com
|
|
SPI NOR gets the non uniform erase code cleaned. We stopped using
bitmasks for erase types and flags, and instead introduced dedicated
members. We then passed the SPI NOR erase map to MTD. Users can now
determine the erase regions and make informed decisions on partitions
size.
|
|
Looking at the error path of __io_uaddr_map, if we fail after pinning
the pages for any reasons, ret will be set to -EINVAL and the error
handler won't properly release the pinned pages.
I didn't manage to trigger it without forcing a failure, but it can
happen in real life when memory is heavily fragmented.
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Fixes: 223ef4743164 ("io_uring: don't allow IORING_SETUP_NO_MMAP rings on highmem pages")
Link: https://lore.kernel.org/r/20240313213912.1920-1-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The code "max(1U, 3 * (1U << shift) / 4)" comes from the Kyber I/O
scheduler. The Kyber I/O scheduler maintains one internal queue per hwq
and hence derives its async_depth from the number of hwq tags. Using
this approach for the mq-deadline scheduler is wrong since the
mq-deadline scheduler maintains one internal queue for all hwqs
combined. Hence this revert.
Cc: stable@vger.kernel.org
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Cc: Zhiguo Niu <Zhiguo.Niu@unisoc.com>
Fixes: d47f9717e5cf ("block/mq-deadline: use correct way to throttling write requests")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240313214218.1736147-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull ext2, isofs, udf, and quota updates from Jan Kara:
"A lot of material this time:
- removal of a lot of GFP_NOFS usage from ext2, udf, quota (either it
was legacy or replaced with scoped memalloc_nofs_*() API)
- removal of BUG_ONs in quota code
- conversion of UDF to the new mount API
- tightening quota on disk format verification
- fix some potentially unsafe use of RCU pointers in quota code and
annotate everything properly to make sparse happy
- a few other small quota, ext2, udf, and isofs fixes"
* tag 'fs_for_v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: (26 commits)
udf: remove SLAB_MEM_SPREAD flag usage
quota: remove SLAB_MEM_SPREAD flag usage
isofs: remove SLAB_MEM_SPREAD flag usage
ext2: remove SLAB_MEM_SPREAD flag usage
ext2: mark as deprecated
udf: convert to new mount API
udf: convert novrs to an option flag
MAINTAINERS: add missing git address for ext2 entry
quota: Detect loops in quota tree
quota: Properly annotate i_dquot arrays with __rcu
quota: Fix rcu annotations of inode dquot pointers
isofs: handle CDs with bad root inode but good Joliet root directory
udf: Avoid invalid LVID used on mount
quota: Fix potential NULL pointer dereference
quota: Drop GFP_NOFS instances under dquot->dq_lock and dqio_sem
quota: Set nofs allocation context when acquiring dqio_sem
ext2: Remove GFP_NOFS use in ext2_xattr_cache_insert()
ext2: Drop GFP_NOFS use in ext2_get_blocks()
ext2: Drop GFP_NOFS allocation from ext2_init_block_alloc_info()
udf: Remove GFP_NOFS allocation in udf_expand_file_adinicb()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
- fsnotify optimizations to reduce cost of fsnotify when nobody is
watching
- fix longstanding wart that system could not be suspended when some
process was waiting for response to fanotify permission event
- some spelling fixes
* tag 'fsnotify_for_v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fanotify: allow freeze when waiting response for permission events
fanotify: Fix misspelling of "writable"
fsnotify: Fix misspelling of "writable"
inotify: Fix misspelling of "writable"
fsnotify: Add fsnotify_sb_has_watchers() helper
fsnotify: optimize the case of no parent watcher
|
|
Pull xfs updates from Chandan Babu:
- Online repair updates:
- More ondisk structures being repaired:
- Inode's mode field by trying to obtain file type value from
the a directory entry
- Quota counters
- Link counts of inodes
- FS summary counters
- Support for in-memory btrees has been added to support repair
of rmap btrees
- Misc changes:
- Report corruption of metadata to the health tracking subsystem
- Enable indirect health reporting when resources are scarce
- Reduce memory usage while repairing refcount btree
- Extend "Bmap update" intent item to support atomic extent
swapping on the realtime device
- Extend "Bmap update" intent item to support extended attribute
fork and unwritten extents
- Code cleanups:
- Bmap log intent
- Btree block pointer checking
- Btree readahead
- Buffer target
- Symbolic link code
- Remove mrlock wrapper around the rwsem
- Convert all the GFP_NOFS flag usages to use the scoped
memalloc_nofs_save() API instead of direct calls with the GFP_NOFS
- Refactor and simplify xfile abstraction. Lower level APIs in shmem.c
are required to be exported in order to achieve this
- Skip checking alignment constraints for inode chunk allocations when
block size is larger than inode chunk size
- Do not submit delwri buffers collected during log recovery when an
error has been encountered
- Fix SEEK_HOLE/DATA for file regions which have active COW extents
- Fix lock order inversion when executing error handling path during
shrinking a filesystem
- Remove duplicate ifdefs
* tag 'xfs-6.9-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (183 commits)
xfs: shrink failure needs to hold AGI buffer
mm/shmem.c: Use new form of *@param in kernel-doc
kernel-doc: Add unary operator * to $type_param_ref
xfs: use kvfree() in xlog_cil_free_logvec()
xfs: xfs_btree_bload_prep_block() should use __GFP_NOFAIL
xfs: fix scrub stats file permissions
xfs: fix log recovery erroring out on refcount recovery failure
xfs: move symlink target write function to libxfs
xfs: move remote symlink target read function to libxfs
xfs: move xfs_symlink_remote.c declarations to xfs_symlink_remote.h
xfs: xfs_bmap_finish_one should map unwritten extents properly
xfs: support deferred bmap updates on the attr fork
xfs: support recovering bmap intent items targetting realtime extents
xfs: add a realtime flag to the bmap update log redo items
xfs: add a xattr_entry helper
xfs: fix xfs_bunmapi to allow unmapping of partial rt extents
xfs: move xfs_bmap_defer_add to xfs_bmap_item.c
xfs: reuse xfs_bmap_update_cancel_item
xfs: add a bi_entry helper
xfs: remove xfs_trans_set_bmap_flags
...
|
|
In buffer lists we have ->is_mapped as well as ->is_mmap, it's
pretty hard to stay sane double checking which one means what,
and in the long run there is a high chance of an eventual bug.
Rename ->is_mapped into ->is_buf_ring.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/c4838f4d8ad506ad6373f1c305aee2d2c1a89786.1710343154.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We never pass a null (top-level) pointer, remove the check.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/0e1a46f9a5cd38e6876905e8030bdff9b0845e96.1710343154.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
- small cleanup of struct->wacom_wac usage (Tatsunosuke Tobita)
|
|
- removal of unused data structures all over the place (Jiri Slaby)
|
|
- support for the following Bluetooth devices (Sandeep C S):
Samsung wireless Keyboard
Samsung wireless GamePad
Samsung Wireless Action Mouse
Samsung Wireless Book Cover
Samsung Wireless Universal Keyboard
Samsung Wireless HOGP Keyboard
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
- dead code removal in hid-nintendo (Jiapeng Chong)
|
|
- 2nd version of code for applying proper quirk depending on firmware version
for lenovo/cptkbd (Mikhail Khvainitski)
|
|
- assorted fixes and optimizations for amd-sfh (Basavaraj Natikar)
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
git://git.samba.org/sfrench/cifs-2.6
Pull smb client updates from Steve French:
- fix for folios/netfs data corruption in cifs_extend_writeback
- additional tracepoint added
- updates for special files and symlinks: improvements to allow
selecting use of either WSL or NFS reparse point format on creating
special files
- allocation size improvement for cached files
- minor cleanup patches
- fix to allow changing the password on remount when password for the
session is expired.
- lease key related fixes: caching hardlinked files, deletes of
deferred close files, and an important fix to better reuse lease keys
for compound operations, which also can avoid lease break timeouts
when low on credits
- fix potential data corruption with write/readdir races
- compression cleanups and a fix for compression headers
* tag '6.9-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6: (24 commits)
cifs: update internal module version number for cifs.ko
smb: common: simplify compression headers
smb: common: fix fields sizes in compression_pattern_payload_v1
smb: client: negotiate compression algorithms
smb3: add dynamic trace point for ioctls
cifs: Fix writeback data corruption
smb: client: return reparse type in /proc/mounts
smb: client: set correct d_type for reparse DFS/DFSR and mount point
smb: client: parse uid, gid, mode and dev from WSL reparse points
smb: client: introduce SMB2_OP_QUERY_WSL_EA
smb: client: Fix a NULL vs IS_ERR() check in wsl_set_xattrs()
smb: client: add support for WSL reparse points
smb: client: reduce number of parameters in smb2_compound_op()
smb: client: fix potential broken compound request
smb: client: move most of reparse point handling code to common file
smb: client: introduce reparse mount option
smb: client: retry compound request without reusing lease
smb: client: do not defer close open handles to deleted files
smb: client: reuse file lease key in compound operations
smb3: update allocation size more accurately on write completion
...
|
|
We should not have any callers of this from non-task context, but Jakub
ran [1] into one from blk-iocost. Rather than risk running into others,
or future ones, just limit blk_time_get_ns() to when it is called from
a task. Any other usage is invalid.
[1] https://lore.kernel.org/lkml/CAHk-=wiOaBLqarS2uFhM1YdwOvCX4CZaWkeyNDY1zONpbYw2ig@mail.gmail.com/
Fixes: da4c8c3d0975 ("block: cache current nsec time in struct blk_plug")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add argument descriptions to the handle_eject_request() kerneldoc
comment.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In the existing code, per-policy flags don't have any impact i.e.
if cpufreq_driver boost is enabled and boost is disabled for one or
more of the policies, the cpufreq driver will behave as if boost is
enabled.
Fix this by incorporating per-policy boost flag in the policy->max
computation used in cpufreq_frequency_table_cpuinfo and setting the
default per-policy boost to mirror the cpufreq_driver boost flag.
Fixes: 218a06a79d9a ("cpufreq: Support per-policy performance boost")
Reported-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Tested-by:Yipeng Zou <zouyipeng@huawei.com> <mailto:zouyipeng@huawei.com>
Reviewed-by: Yipeng Zou <zouyipeng@huawei.com> <mailto:zouyipeng@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
As Linus suggested this enables pidfs unconditionally. A key property to
retain is the ability to compare pidfds by inode number (cf. [1]).
That's extremely helpful just as comparing namespace file descriptors by
inode number is. They are used in a variety of scenarios where they need
to be compared, e.g., when receiving a pidfd via SO_PEERPIDFD from a
socket to trivially authenticate a the sender and various other
use-cases.
For 64bit systems this is pretty trivial to do. For 32bit it's slightly
more annoying as we discussed but we simply add a dumb ida based
allocator that gets used on 32bit. This gives the same guarantees about
inode numbers on 64bit without any overflow risk. Practically, we'll
never run into overflow issues because we're constrained by the number
of processes that can exist on 32bit and by the number of open files
that can exist on a 32bit system. On 64bit none of this matters and
things are very simple.
If 32bit also needs the uniqueness guarantee they can simply parse the
contents of /proc/<pid>/fd/<nr>. The uniqueness guarantees have a
variety of use-cases. One of the most obvious ones is that they will
make pidfiles (or "pidfdfiles", I guess) reliable as the unique
identifier can be placed into there that won't be reycled. Also a
frequent request.
Note, I took the chance and simplified path_from_stashed() even further.
Instead of passing the inode number explicitly to path_from_stashed() we
let the filesystem handle that internally. So path_from_stashed() ends
up even simpler than it is now. This is also a good solution allowing
the cleanup code to be clean and consistent between 32bit and 64bit. The
cleanup path in prepare_anon_dentry() is also switched around so we put
the inode before the dentry allocation. This means we only have to call
the cleanup handler for the filesystem's inode data once and can rely
->evict_inode() otherwise.
Aside from having to have a bit of extra code for 32bit it actually ends
up a nice cleanup for path_from_stashed() imho.
Tested on both 32 and 64bit including error injection.
Link: https://github.com/systemd/systemd/pull/31713 [1]
Link: https://lore.kernel.org/r/20240312-dingo-sehnlich-b3ecc35c6de7@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Typos are bad. Fix them.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The EM only supports power in uW. Make sure that it is not possible to
register some downstream driver which doesn't provide power in uW.
The only exception is artificial EM, but that EM is ignored by the rest of
kernel frameworks (thermal, powercap, etc).
Reported-by: PoShao Chen <poshao.chen@mediatek.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull modules updates from Luis Chamberlain:
"Christophe Leroy did most of the work on this release, first with a
few cleanups on CONFIG_STRICT_KERNEL_RWX and ending with error
handling for when set_memory_XX() can fail.
This is part of a larger effort to clean up all these callers which
can fail, modules is just part of it"
* tag 'modules-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
module: Don't ignore errors from set_memory_XX()
lib/test_kmod: fix kernel-doc warnings
powerpc: Simplify strict_kernel_rwx_enabled()
modules: Remove #ifdef CONFIG_STRICT_MODULE_RWX around rodata_enabled
init: Declare rodata_enabled and mark_rodata_ro() at all time
module: Change module_enable_{nx/x/ro}() to more explicit names
module: Use set_memory_rox()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- Measure initrd and command line using the CC protocol if the ordinary
TCG2 protocol is not implemented, typically on TDX confidential VMs
- Avoid creating mappings that are both writable and executable while
running in the EFI boot services. This is a prerequisite for getting
the x86 shim loader signed by MicroSoft again, which allows the
distros to install on x86 PCs that ship with EFI secure boot enabled.
- API update for struct platform_driver::remove()
* tag 'efi-next-for-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
virt: efi_secret: Convert to platform remove callback returning void
x86/efistub: Remap kernel text read-only before dropping NX attribute
efi/libstub: Add get_event_log() support for CC platforms
efi/libstub: Measure into CC protocol if TCG2 protocol is absent
efi/libstub: Add Confidential Computing (CC) measurement typedefs
efi/tpm: Use symbolic GUID name from spec for final events table
efi/libstub: Use TPM event typedefs from the TCG PC Client spec
|
|
'clk-rate-exclusive' into clk-next
- Increase dev_id len for clkdev lookups
* clk-samsung: (25 commits)
clk: samsung: Add CPU clock support for Exynos850
clk: samsung: Pass mask to wait_until_mux_stable()
clk: samsung: Keep register offsets in chip specific structure
clk: samsung: Keep CPU clock chip specific data in a dedicated struct
clk: samsung: Pass register layout type explicitly to CLK_CPU()
clk: samsung: Pass actual CPU clock registers base to CPU_CLK()
clk: samsung: Group CPU clock functions by chip
clk: samsung: Use single CPU clock notifier callback for all chips
clk: samsung: Reduce params count in exynos_register_cpu_clock()
clk: samsung: Pull struct exynos_cpuclk into clk-cpu.c
clk: samsung: Improve clk-cpu.c style
dt-bindings: clock: exynos850: Add CMU_CPUCLK0 and CMU_CPUCL1
clk: samsung: gs101: add support for cmu_peric1
clk: samsung: gs101: drop extra empty line
dt-bindings: clock: google,gs101-clock: add PERIC1 clock management unit
clk: samsung: exynos850: Propagate SPI IPCLK rate change
clk: samsung: gs101: gpio_peric0_pclk needs to be kept on
clk: samsung: exynos850: Add PDMA clocks
dt-bindings: clock: tesla,fsd: Fix spelling mistake
clk: samsung: gs101: add support for cmu_peric0
...
* clk-imx:
clk: imx: imx8mp: Fix SAI_MCLK_SEL definition
clk: imx: scu: Use common error handling code in imx_clk_scu_alloc_dev()
clk: imx: composite-8m: Delete two unnecessary initialisations in __imx8m_clk_hw_composite()
clk: imx: composite-8m: Less function calls in __imx8m_clk_hw_composite() after error detection
* clk-rockchip:
clk: rockchip: rk3399: Allow to set rate of clk_i2s0_frac's parent
clk: rockchip: rk3588: use linked clock ID for GATE_LINK
clk: rockchip: rk3588: fix indent
clk: rockchip: rk3588: fix pclk_vo0grf and pclk_vo1grf
dt-bindings: clock: rk3588: add missing PCLK_VO1GRF
dt-bindings: clock: rk3588: drop CLK_NR_CLKS
clk: rockchip: rk3588: fix CLK_NR_CLKS usage
clk: rockchip: rk3568: Add PLL rate for 128MHz
* clk-clkdev:
clkdev: Update clkdev id usage to allow for longer names
* clk-rate-exclusive:
clk: Add a devm variant of clk_rate_exclusive_get()
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Merge additional thermal control changes for 6.9-rc1 from Daniel Lezcano:
"- Fix memory leak in the error path at probe time in the Mediatek LVTS
driver (Christophe Jaillet)
- Fix control buffer enablement regression on Meditek MT7896 (Frank
Wunderlich)
- Drop spaces before TABs in different places: thermal-of, ST drivers
and Makefile (Geert Uytterhoeven)
- Adjust DT binding for NXP as fsl,tmu-range min/maxItems can vary
among several SoC versions (Fabio Estevam)
- Add support for H616 THS controller for the Sun8i platforms. Note
that this change relies on another change in the SoC specific code
which is included in this branch (Martin Botka)
- Don't fail probe due to zone registration failure because there is
no trip points defined in the DT (Mark Brown)
- Support variable TMU array size for new platforms (Peng Fan)
- Adjust the DT binding for thermal-of and make the polling time not
required and assume it is zero when not found in the DT (Konrad
Dybcio)
- Add r8a779h0 support in both the DT and the driver (Geert Uytterhoeven)"
* tag 'thermal-v6.9-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/rcar_gen3: Add support for R-Car V4M
dt-bindings: thermal: rcar-gen3-thermal: Add r8a779h0 support
thermal/of: Assume polling-delay(-passive) 0 when absent
dt-bindings: thermal-zones: Don't require polling-delay(-passive)
thermal/drivers/qoriq: Fix getting tmu range
thermal/drivers/sun8i: Don't fail probe due to zone registration failure
thermal/drivers/sun8i: Add support for H616 THS controller
thermal/drivers/sun8i: Add SRAM register access code
thermal/drivers/sun8i: Extend H6 calibration to support 4 sensors
thermal/drivers/sun8i: Explain unknown H6 register value
dt-bindings: thermal: sun8i: Add H616 THS controller
soc: sunxi: sram: export register 0 for THS on H616
dt-bindings: thermal: qoriq-thermal: Adjust fsl,tmu-range min/maxItems
thermal: Drop spaces before TABs
thermal/drivers/mediatek: Fix control buffer enablement on MT7896
thermal/drivers/mediatek/lvts_thermal: Fix a memory leak in an error handling path
|
|
'clk-microchip' into clk-next
* clk-remove:
clk: starfive: jh7110-vout: Convert to platform remove callback returning void
clk: starfive: jh7110-isp: Convert to platform remove callback returning void
clk: imx: imx8-acm: Convert to platform remove callback returning void
* clk-amlogic:
clk: meson: Add missing clocks to axg_clk_regmaps
* clk-qcom: (62 commits)
clk: qcom: gcc-ipq5018: fix register offset for GCC_UBI0_AXI_ARES reset
clk: qcom: gcc-ipq5018: fix 'halt_reg' offset of 'gcc_pcie1_pipe_clk'
clk: qcom: gcc-ipq5018: fix 'enable_reg' offset of 'gcc_gmac0_sys_clk'
clk: qcom: camcc-x1e80100: Fix missing DT_IFACE enum in x1e80100 camcc
clk: qcom: mmcc-msm8974: fix terminating of frequency table arrays
clk: qcom: mmcc-apq8084: fix terminating of frequency table arrays
clk: qcom: camcc-sc8280xp: fix terminating of frequency table arrays
clk: qcom: gcc-ipq9574: fix terminating of frequency table arrays
clk: qcom: gcc-ipq8074: fix terminating of frequency table arrays
clk: qcom: gcc-ipq6018: fix terminating of frequency table arrays
clk: qcom: gcc-ipq5018: fix terminating of frequency table arrays
clk: qcom: dispcc-sdm845: Adjust internal GDSC wait times
dt-bindings: clk: qcom: drop the SC7180 Modem subsystem clock controller
clk: qcom: drop the SC7180 Modem subsystem clock driver
clk: qcom: Use qcom_branch_set_clk_en()
clk: qcom: branch: Add a helper for setting the enable bit
clk: qcom: dispcc-sm8250: Make clk_init_data and pll_vco const
clk: qcom: gcc-sc8180x: Add missing UFS QREF clocks
clk: qcom: gcc-msm8953: add more resets
clk: qcom: videocc-*: switch to module_platform_driver
...
* clk-parent:
clk: Fix clk_core_get NULL dereference
* clk-microchip:
clk: microchip: mpfs: convert MSSPLL outputs to clk_divider
clk: microchip: mpfs: add missing MSSPLL outputs
clk: microchip: mpfs: setup for using other mss pll outputs
clk: microchip: mpfs: split MSSPLL in two
dt-bindings: can: mpfs: add missing required clock
dt-bindings: clock: mpfs: add more MSSPLL output definitions
|
|
'clk-allwinner' into clk-next
* clk-aspeed:
clk: ast2600: Add FSI parent clock with correct rate
dt-bindings: clock: ast2600: Add FSI clock
* clk-keystone:
clk: keystone: sci-clk: Adding support for non contiguous clocks
* clk-mobileye:
dt-bindings: reset: mobileye,eyeq5-reset: add bindings
dt-bindings: clock: mobileye,eyeq5-clk: add bindings
clk: fixed-factor: add fwname-based constructor functions
clk: fixed-factor: add optional accuracy support
* clk-allwinner:
clk: sunxi: usb: fix kernel-doc warnings
clk: sunxi: sun9i-cpus: fix kernel-doc warnings
clk: sunxi: a20-gmac: fix kernel-doc warnings
|
|
and 'clk-bulk' into clk-next
- Add a devm_clk_bulk_get_all_enable() API to get and enable all clks
for a device
- Fix some static checker errors in the hisilicon clk driver
* clk-renesas: (25 commits)
clk: renesas: r8a779h0: Add RPC-IF clock
clk: renesas: r8a779h0: Add SYS-DMAC clocks
clk: renesas: r8a779h0: Add SDHI clock
clk: renesas: r8a779h0: Add EtherAVB clocks
clk: renesas: r9a07g04[34]: Fix typo for sel_shdi variable
clk: renesas: r9a07g04[34]: Use SEL_SDHI1_STS status configuration for SD1 mux
clk: renesas: r8a779f0: Correct PFC/GPIO parent clock
clk: renesas: r8a779g0: Correct PFC/GPIO parent clocks
clk: renesas: r8a779h0: Add I2C clocks
clk: renesas: r8a779h0: Add watchdog clock
clk: renesas: r8a779h0: Add PFC/GPIO clocks
clk: renesas: r8a779g0: Fix PCIe clock name
clk: renesas: cpg-mssr: Add support for R-Car V4M
clk: renesas: rcar-gen4: Add support for FRQCRC1
clk: renesas: r9a07g043: Add clock and reset entries for CRU
clk: renesas: r9a08g045: Add clock and reset support for watchdog
dt-bindings: clock: Add R8A779H0 V4M CPG Core Clock Definitions
dt-bindings: clock: renesas,cpg-mssr: Document R-Car V4M support
dt-bindings: power: Add r8a779h0 SYSC power domain definitions
dt-bindings: power: renesas,rcar-sysc: Document R-Car V4M support
...
* clk-cleanup:
clk: zynq: Prevent null pointer dereference caused by kmalloc failure
clk: fractional-divider: Use bit operations consistently
clk: fractional-divider: Move mask calculations out of lock
clk: ti: dpll3xxx: use correct function names in kernel-doc
clk: clocking-wizard: Remove redundant initialization of pointer div_addr
clk: keystone: sci-clk: match func name comment to actual
clk: cdce925: Remove redundant assignment to variable 'rate'
MAINTAINERS: drop Sekhar Nori
* clk-hisilicon:
clk: hisilicon: Use devm_kcalloc() instead of devm_kzalloc()
clk: hisilicon: hi3559a: Fix an erroneous devm_kfree()
clk: hisilicon: hi3519: Release the correct number of gates in hi3519_clk_unregister()
* clk-mediatek:
clk: mediatek: clk-mt8173-apmixedsys: Use common error handling code in clk_mt8173_apmixed_probe()
clk: mediatek: add infracfg reset controller for mt7988
dt-bindings: reset: mediatek: add MT7988 infracfg reset IDs
dt-bindings: clock: mediatek: convert SSUSBSYS to the json-schema clock
dt-bindings: clock: mediatek: convert PCIESYS to the json-schema clock
dt-bindings: clock: mediatek: convert hifsys to the json-schema clock
clk: mediatek: mt7981-topckgen: flag SGM_REG_SEL as critical
clk: mediatek: mt8183: Correct parent of CLK_INFRA_SSPM_32K_SELF
clk: mediatek: mt7622-apmixedsys: Fix an error handling path in clk_mt8135_apmixed_probe()
clk: mediatek: mt8135: Fix an error handling path in clk_mt8135_apmixed_probe()
* clk-bulk:
clk: Provide managed helper to get and enable bulk clocks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"Small bug fixes and device tree updates. No new features"
* tag 'tpmdd-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: tis_i2c: Add compatible string nuvoton,npct75x
tpm_tis: Add compatible string atmel,at97sc3204
tpm_tis_spi: Add compatible string atmel,attpm20p
dt-bindings: tpm: Add compatible string atmel,attpm20p
tpm,tpm_tis: Avoid warning splat at shutdown
tpm/tpm_ftpm_tee: fix all kernel-doc warnings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
- imx: add support for i.MX95 ELE/V2X MU
- misc: I will be signing-off from my personal gmail id from now on
* tag 'mailbox-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox: imx: support i.MX95 Generic/ELE/V2X MU
mailbox: imx: populate sub-nodes
mailbox: imx: get RR/TR registers num from Parameter register
mailbox: imx: support return value of init
dt-bindings: mailbox: fsl,mu: add i.MX95 Generic/ELE/V2X MU compatible
|
|
Most compressors are actually CPU-based and won't sleep during compression
and decompression. We should remove the redundant memcpy for them.
This patch checks if the algorithm is sleepable by testing the
CRYPTO_ALG_ASYNC algorithm flag.
Generally speaking, async and sleepable are semantically similar but not
equal. But for compress drivers, they are basically equal at least due to
the below facts.
Firstly, scompress drivers - crypto/deflate.c, lz4.c, zstd.c, lzo.c etc
have no sleep. Secondly, zRAM has been using these scompress drivers for
years in atomic contexts, and never worried those drivers going to sleep.
One exception is that an async driver can sometimes still return
synchronously per Herbert's clarification. In this case, we are still
having a redundant memcpy. But we can't know if one particular acomp
request will sleep or not unless crypto can expose more details for each
specific request from offload drivers.
Link: https://lkml.kernel.org/r/20240222081135.173040-3-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Tested-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Chris Li <chrisl@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
