| Age | Commit message (Collapse) | Author |
|---|
|
This patch adapts Exynos DRM FIMC driver to new IPP v2 core API.
The side effect of this conversion is a switch to driver component API
to register properly in the Exynos DRM core.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Merge conflict so merged manually.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
This patch adapts Exynos DRM GScaler driver to new IPP v2 core API.
The side effect of this conversion is a switch to driver component API
to register properly in the Exynos DRM core. During the conversion
driver has been adapted to support more specific compatible strings
to distinguish between Exynos5250 and Exynos5420 (different hardware
limits). Support for Exynos5433 variant has been added too
(different limits table, removed dependency on ARCH_EXYNOS5).
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
This patch adapts Exynos DRM rotator driver to new IPP v2 core API.
The side effect of this conversion is a switch to driver component API
to register properly in the Exynos DRM core.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
This patch adds Exynos IPP v2 subsystem and userspace API.
New userspace API is focused ONLY on memory-to-memory image processing.
The two remainging operation modes of obsolete IPP v1 API (framebuffer
writeback and local-path output with image processing) can be implemented
using standard DRM features: writeback connectors and additional DRM planes
with scaling features.
V2 IPP userspace API is based on stateless approach, which much better fits
to memory-to-memory image processing model. It also provides support for
all image formats, which are both already defined in DRM API and supported
by the existing IPP hardware modules.
The API consists of the following ioctls:
- DRM_IOCTL_EXYNOS_IPP_GET_RESOURCES: to enumerate all available image
processing modules,
- DRM_IOCTL_EXYNOS_IPP_GET_CAPS: to query capabilities and supported image
formats of given IPP module,
- DRM_IOCTL_EXYNOS_IPP_GET_LIMITS: to query hardware limitiations for
selected image format of given IPP module,
- DRM_IOCTL_EXYNOS_IPP_COMMIT: to perform operation described by the
provided structures (source and destination buffers, operation rectangle,
transformation, etc).
The proposed userspace API is extensible. In the future more advanced image
processing operations can be defined to support for example blending.
Userspace API is fully functional also on DRM render nodes, so it is not
limited to the root/privileged client.
Internal driver API also has been completely rewritten. New IPP core
performs all possible input validation, checks and object life-time
control. The drivers can focus only on writing configuration to hardware
registers. Stateless nature of DRM_IOCTL_EXYNOS_IPP_COMMIT ioctl simplifies
the driver API. Minimal driver needs to provide a single callback for
starting processing and an array with supported image formats.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Merge conflict so merged manually.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID fixes from Jiri Kosina:
- quirk for Toshiba Click Mini L9W-B, from Hans de Goede
- intel-ish-hid and wacom error handling (device freeing) path fixes
from Arvind Yadav
- memory corruption fix in intel-ish-hid driver from Hans de Goede
- a few new device ID additions to hid-lenovo from Peter Ganzhorn
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: i2c-hid: Add RESEND_REPORT_DESCR quirk for Toshiba Click Mini L9W-B
HID: intel-ish-hid: use put_device() instead of kfree()
HID: intel_ish-hid: Stop using a static local buffer in get_report()
HID: intel_ish-hid: Move header size check to inside the loop
HID: wacom: Release device resource data obtained by devres_alloc()
HID: lenovo: Add support for IBM/Lenovo Scrollpoint mice
|
|
In order to keep consist with Vega,
the output format of the pp_power_profile_mode would be
<integer><mode name string>< “*” for current profile>:"detail settings"
and remove the "CURRENT" mode line.
for example:
NUM MODE_NAME SCLK_UP_HYST SCLK_DOWN_HYST SCLK_ACTIVE_LEVEL MCLK_UP_HYST MCLK_DOWN_HYST MCLK_ACTIVE_LEVEL
0 3D_FULL_SCREEN: 0 100 30 0 100 10
1 POWER_SAVING: 10 0 30 - - -
2 VIDEO: - - - 10 16 31
3 VR: 0 11 50 0 100 10
4 COMPUTE: 0 5 30 - - -
5 CUSTOM *: 0 5 30 0 100 10
NUM MODE_NAME SCLK_UP_HYST SCLK_DOWN_HYST SCLK_ACTIVE_LEVEL MCLK_UP_HYST MCLK_DOWN_HYST MCLK_ACTIVE_LEVEL
0 3D_FULL_SCREEN: 0 100 30 0 100 10
1 POWER_SAVING *: 10 0 30 0 100 10
2 VIDEO: - - - 10 16 31
3 VR: 0 11 50 0 100 10
4 COMPUTE: 0 5 30 - - -
5 CUSTOM: - - - - - -
Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
v2:
Use dma_fence_wait instead of dma_fence_wait_timeout(...,MAX_SCHEDULE_TIMEOUT)
Avoid printing error message for ERESTARTSYS
Originally-by: David Panariti <David.Panariti@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
GFP_TRANSHUGE tries very hard to allocate huge pages, which can result
in long delays with high memory pressure. I have observed firefox
freezing for up to around a minute due to this while restic was taking
a full system backup.
Since we don't really need huge pages, use GFP_TRANSHUGE_LIGHT |
__GFP_NORETRY instead, in order to fail quickly when there are no huge
pages available.
Set __GFP_KSWAPD_RECLAIM as well, in order for huge pages to be freed
up in the background if necessary.
With these changes, I'm no longer seeing freezes during a restic backup.
Cc: stable@vger.kernel.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Allocating up to 32 physically contiguous pages can easily fail (and has
failed for me), and isn't necessary anyway.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The two ranges overlap.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This fixes setting the clock divider on the TI OMAP-L138 LCDK board.
The clock drivers for OMAP-L138 are being covernted to the common clock
framework. When this happens, clk_set_rate() will no longer return an
error. However, on this SoC, the clock rate cannot actually be changed
because the clock has to maintain a fixed ratio to the ARM clock. So
after attempting to set the clock rate, we need to check to see if the
new rate is actually close enough. If not, then follow the previous
error path to adjust the divider in LCDC IP block to compensate for not
being able to change the parent clock rate.
Tested working on a TI OMAP-L138 LCDK board.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
|
|
As per listxattr(2):
On success, a nonnegative number is returned indicating the size
of the extended attribute name list. On failure, -1 is returned
and errno is set appropriately.
In SMB1, when the server returns an empty EA list through a listxattr(),
it will correctly return 0 as there are no EAs for the given file.
However, in SMB2+, it returns -ENODATA in listxattr() which is wrong since
the request and response were sent successfully, although there's no actual
EA for the given file.
This patch fixes listxattr() for SMB2+ by returning 0 in cifs_listxattr()
when the server returns an empty list of EAs.
Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Now signing is supported with RDMA transport.
Remove the code that disabled it.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
|
|
The data buffer allocated on the stack can't be DMA'ed, ib_dma_map_page will
return an invalid DMA address for a buffer on stack. Even worse, this
incorrect address can't be detected by ib_dma_mapping_error. Sending data
from this address to hardware will not fail, but the remote peer will get
junk data.
Fix this by allocating the request on the heap in smb3_validate_negotiate.
Changes in v2:
Removed duplicated code on freeing buffers on function exit.
(Thanks to Parav Pandit <parav@mellanox.com>)
Fixed typo in the patch title.
Changes in v3:
Added "Fixes" to the patch.
Changed several sizeof() to use *pointer in place of struct.
Changes in v4:
Added detailed comments on the failure through RDMA.
Allocate request buffer using GPF_NOFS.
Fixed possible memory leak.
Changes in v5:
Removed variable ret for checking return value.
Changed to use pneg_inbuf->Dialects[0] to calculate unused space in pneg_inbuf.
Fixes: ff1c038addc4 ("Check SMB3 dialects against downgrade attacks")
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Tom Talpey <ttalpey@microsoft.com>
|
|
The NVIDIA Denver CPU also needs a PSCI call to harden the branch
predictor.
Signed-off-by: David Gilhooley <dgilhooley@nvidia.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
This patch adds the MIDR encodings for NVIDIA as well as
the Denver and Carmel CPUs used in Tegra SoCs.
Signed-off-by: David Gilhooley <dgilhooley@nvidia.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Driver features data block has a boolean flag for PSR, use this to decide
whether PSR should be enabled on a platform. The module parameter can
still be used to override this.
Note: The feature currently remains disabled by default for all platforms
irrespective of what VBT says.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180509003524.3199-1-dhinakaran.pandiyan@intel.com
|
|
The 0457:10fb touchscreen found on the Toshiba Click Mini L9W-B needs
to have a report-decriptors command send to it on resume in order for
the touchscreen to start generating events again on resume.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
USB controller ASM1042 stops working after commit de3ef1eb1cd0 (PM /
core: Drop run_wake flag from struct dev_pm_info).
The device in question is not power managed by platform firmware,
furthermore, it only supports PME# from D3cold:
Capabilities: [78] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot-,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Before commit de3ef1eb1cd0, the device never gets runtime suspended.
After that commit, the device gets runtime suspended to D3hot, which can
not generate any PME#.
usb_hcd_pci_probe() unconditionally calls device_wakeup_enable(), hence
device_can_wakeup() in pci_dev_run_wake() always returns true.
So pci_dev_run_wake() needs to check PME wakeup capability as its first
condition.
In addition, change wakeup flag passed to pci_target_state() from false
to true, because we want to find the deepest state different from D3cold
that the device can still generate PME#. In this case, it's D0 for the
device in question.
Fixes: de3ef1eb1cd0 (PM / core: Drop run_wake flag from struct dev_pm_info)
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: 4.13+ <stable@vger.kernel.org> # 4.13+
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If the next_freq field of struct sugov_policy is set to UINT_MAX,
it shouldn't be used for updating the CPU frequency (this is a
special "invalid" value), but after commit b7eaf1aab9f8 (cpufreq:
schedutil: Avoid reducing frequency of busy CPUs prematurely) it
may be passed as the new frequency to sugov_update_commit() in
sugov_update_single().
Fix that by adding an extra check for the special UINT_MAX value
of next_freq to sugov_update_single().
Fixes: b7eaf1aab9f8 (cpufreq: schedutil: Avoid reducing frequency of busy CPUs prematurely)
Reported-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 4.12+ <stable@vger.kernel.org> # 4.12+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
After commit 794a56ebd9a57 (sched/cpufreq: Change the worker kthread to
SCHED_DEADLINE) schedutil kthreads are "ignored" for a clock frequency
selection point of view, so the potential corner case for RT tasks is not
possible at all now.
Remove the stale comment mentioning it.
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
P-state selection algorithm (powersave or performance) is selected by
echoing the desired choice to scaling_governor sysfs attribute and not
to scaling_cur_freq (as currently stated).
Fix it.
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Fix a typo in admin-guide/pm/sleep-states.rst.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Prepare to allow the GuC submission to be run from underneath a
hardirq timer context (and not just the current softirq context) as is
required for fast preemption resets and context switches.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180508210318.10274-2-chris@chris-wilson.co.uk
|
|
Prepare to allow the execlists submission to be run from underneath a
hardirq timer context (and not just the current softirq context) as is
required for fast preemption resets and context switches.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180508210318.10274-1-chris@chris-wilson.co.uk
|
|
In igt_flush_test() we try to switch back to the kernel context, but we
are only able to do so when we are called with struct_mutex held.
More of my CI fallout from lockdep being temporarily suppressed :(
Fixes: 4cdf65ce8cc2 ("drm/i915/selftests: Return to kernel context after each test")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180509065926.19207-1-chris@chris-wilson.co.uk
|
|
When using uni-planar formats (like RGB), the scaling parameters are
stored in plane 0, not plane 1.
Fixes: fc04023fafec ("drm/vc4: Add support for YUV planes.")
Cc: stable@vger.kernel.org
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180507121303.5610-1-boris.brezillon@bootlin.com
|
|
Calling mock_engine() calls i915_timeline_init() and that requires
struct_mutex to be held as it adds itself to the global list of
timelines. This error was introduced by commit a89d1f921c15 ("drm/i915:
Split i915_gem_timeline into individual timelines") but the issue was
masked in CI by the earlier lockdep spam.
Fixes: a89d1f921c15 ("drm/i915: Split i915_gem_timeline into individual timelines")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180508211056.17151-1-chris@chris-wilson.co.uk
|
|
Since commit a92a08499b1f "r8169: improve runtime pm in general and
suspend unused ports" interfaces w/o link are runtime-suspended after
10s. On systems where drivers take longer to load this can lead to the
situation that the interface is runtime-suspended already when it's
initially brought up.
This shouldn't be a problem because rtl_open() resumes MAC/PHY.
However with at least one chip version the interface doesn't properly
come up, as reported here:
https://bugzilla.kernel.org/show_bug.cgi?id=199549
The vendor driver uses a delay to give certain chip versions some
time to resume before starting the PHY configuration. So let's do
the same. I don't know which chip versions may be affected,
therefore apply this delay always.
This patch was reported to fix the issue for RTL8168h.
I was able to reproduce the issue on an Asus H310I-Plus which also
uses a RTL8168h. Also in my case the patch fixed the issue.
Reported-by: Slava Kardakov <ojab@ojab.ru>
Tested-by: Slava Kardakov <ojab@ojab.ru>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch brings back possibility to use drivers depending on
DRM_EXYNOS, on Samsung S5PV210/S5PC110 series based systems.
Fixes: dbbc925bb83a ("drm/exynos: depend on ARCH_EXYNOS for DRM_EXYNOS")
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
This patch adds support for FIMD variant found on S5PV210 SoC.
Except CLKSEL bit availability, it is identical to Exynos4210.
Tested-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Use new return type vm_fault_t for fault handler
in struct vm_operations_struct.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into exynos-drm-next
Fixup pagefault issue of mixer driver
- it makes sure to check shadow register for interlace scan.
- it corrects chroma_addr[1], height and vertical position values.
And trivial cleanup
- it just removes duplicated drm_bridge_attach.
|
|
drm_bridge_attach takes care of these assignments, so there is no need
to open-code them a second time.
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
CI noticed
<4>[ 23.430701] ============================================
<4>[ 23.430706] WARNING: possible recursive locking detected
<4>[ 23.430713] 4.17.0-rc4-CI-CI_DRM_4156+ #1 Not tainted
<4>[ 23.430720] --------------------------------------------
<4>[ 23.430725] systemd-udevd/169 is trying to acquire lock:
<4>[ 23.430732] (ptrval) (&(&timeline->lock)->rlock){....}, at: move_to_timeline+0x48/0x12c [i915]
<4>[ 23.430888]
but task is already holding lock:
<4>[ 23.430894] (ptrval) (&(&timeline->lock)->rlock){....}, at: i915_request_submit+0x1a/0x40 [i915]
<4>[ 23.430995]
other info that might help us debug this:
<4>[ 23.431002] Possible unsafe locking scenario:
<4>[ 23.431007] CPU0
<4>[ 23.431010] ----
<4>[ 23.431013] lock(&(&timeline->lock)->rlock);
<4>[ 23.431021] lock(&(&timeline->lock)->rlock);
<4>[ 23.431028]
*** DEADLOCK ***
<4>[ 23.431036] May be due to missing lock nesting notation
<4>[ 23.431044] 5 locks held by systemd-udevd/169:
<4>[ 23.431049] #0: (ptrval) (&dev->mutex){....}, at: __driver_attach+0x42/0xe0
<4>[ 23.431065] #1: (ptrval) (&dev->mutex){....}, at: __driver_attach+0x50/0xe0
<4>[ 23.431078] #2: (ptrval) (&dev->struct_mutex){+.+.}, at: i915_gem_init+0xca/0x630 [i915]
<4>[ 23.431174] #3: (ptrval) (rcu_read_lock){....}, at: submit_notify+0x35/0x124 [i915]
<4>[ 23.431271] #4: (ptrval) (&(&timeline->lock)->rlock){....}, at: i915_request_submit+0x1a/0x40 [i915]
<4>[ 23.431369]
stack backtrace:
<4>[ 23.431377] CPU: 0 PID: 169 Comm: systemd-udevd Not tainted 4.17.0-rc4-CI-CI_DRM_4156+ #1
<4>[ 23.431385] Hardware name: Dell Inc. OptiPlex GX280 /0G8310, BIOS A04 02/09/2005
<4>[ 23.431394] Call Trace:
<4>[ 23.431403] dump_stack+0x67/0x9b
<4>[ 23.431411] __lock_acquire+0xc67/0x1b50
<4>[ 23.431421] ? ring_buffer_lock_reserve+0x154/0x3f0
<4>[ 23.431429] ? lock_acquire+0xa6/0x210
<4>[ 23.431435] lock_acquire+0xa6/0x210
<4>[ 23.431530] ? move_to_timeline+0x48/0x12c [i915]
<4>[ 23.431540] _raw_spin_lock+0x2a/0x40
<4>[ 23.431634] ? move_to_timeline+0x48/0x12c [i915]
<4>[ 23.431730] move_to_timeline+0x48/0x12c [i915]
<4>[ 23.431826] __i915_request_submit+0xfa/0x280 [i915]
<4>[ 23.431923] i915_request_submit+0x25/0x40 [i915]
<4>[ 23.432024] i9xx_submit_request+0x11/0x140 [i915]
<4>[ 23.432120] submit_notify+0x8d/0x124 [i915]
<4>[ 23.432202] __i915_sw_fence_complete+0x81/0x250 [i915]
<4>[ 23.432300] __i915_request_add+0x31c/0x7c0 [i915]
<4>[ 23.432395] i915_gem_init+0x621/0x630 [i915]
<4>[ 23.432476] i915_driver_load+0xbee/0x10b0 [i915]
<4>[ 23.432485] ? trace_hardirqs_on_caller+0xe0/0x1b0
<4>[ 23.432566] i915_pci_probe+0x29/0x90 [i915]
<4>[ 23.432574] pci_device_probe+0xa1/0x130
<4>[ 23.432582] driver_probe_device+0x306/0x480
<4>[ 23.432589] __driver_attach+0xb7/0xe0
<4>[ 23.432596] ? driver_probe_device+0x480/0x480
<4>[ 23.432602] ? driver_probe_device+0x480/0x480
<4>[ 23.432609] bus_for_each_dev+0x74/0xc0
<4>[ 23.432616] bus_add_driver+0x15f/0x250
<4>[ 23.432623] ? 0xffffffffa02d7000
<4>[ 23.432629] driver_register+0x52/0xc0
<4>[ 23.432635] ? 0xffffffffa02d7000
<4>[ 23.432642] do_one_initcall+0x58/0x370
<4>[ 23.432653] ? do_init_module+0x1d/0x1ea
<4>[ 23.432660] ? rcu_read_lock_sched_held+0x6f/0x80
<4>[ 23.432667] ? kmem_cache_alloc_trace+0x282/0x2e0
<4>[ 23.432675] do_init_module+0x56/0x1ea
<4>[ 23.432682] load_module+0x2435/0x2b20
<4>[ 23.432694] ? __se_sys_finit_module+0xd3/0xf0
<4>[ 23.432701] __se_sys_finit_module+0xd3/0xf0
<4>[ 23.432710] do_syscall_64+0x55/0x190
<4>[ 23.432717] entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[ 23.432724] RIP: 0033:0x7fa780782839
<4>[ 23.432729] RSP: 002b:00007ffcea73e668 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
<4>[ 23.432738] RAX: ffffffffffffffda RBX: 0000561a472a4b30 RCX: 00007fa780782839
<4>[ 23.432745] RDX: 0000000000000000 RSI: 00007fa7804610e5 RDI: 000000000000000e
<4>[ 23.432752] RBP: 00007fa7804610e5 R08: 0000000000000000 R09: 00007ffcea73e780
<4>[ 23.432758] R10: 000000000000000e R11: 0000000000000246 R12: 0000000000000000
<4>[ 23.432765] R13: 0000561a47296450 R14: 0000000000020000 R15: 0000561a472a4b30
but did not report it as an issue as it only occurred during the first
module on boot. This is due to the removal of the distinct global
timeline, and its separate lock class. So instead mark up the expected
nesting. An alternative would be to define a separate lock class for the
engine, but since we only expect to have a single point of nesting, we
can avoid having multiple lock classes for the struct.
Fixes: a89d1f921c15 ("drm/i915: Split i915_gem_timeline into individual timelines")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Tested-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180508153514.20251-1-chris@chris-wilson.co.uk
|
|
The i915_flip* tracepoints are no longer in use since the removal of CS
flip in commit 8b5d27b911d7 ("drm/i915: Remove intel_flip_work
infrastructure")
References: 8b5d27b911d7 ("drm/i915: Remove intel_flip_work infrastructure")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180508151552.31024-1-chris@chris-wilson.co.uk
|
|
DP_TRAINING_AUX_RD_INTERVAL with DP 1.3 spec changed bit scheeme from 8
bits to 7 in DPCD 0x000e. The 8th bit is used to identify extended
receiver capabilities. For panels that use this new feature wait interval
would be increased by 512 ms, when spec is max 16 ms. This behavior is
described in table 2-158 of DP 1.4 spec address 0000eh.
With the introduction of DP 1.4 spec main link clock recovery was
standardized to 100 us regardless of TRAINING_AUX_RD_INTERVAL value.
To avoid breaking panels that are not spec compiant we now warn on
invalid values.
V2: commit title/message, masking all 7 bits, warn on out of spec values.
V3: commit message, make link train clock recovery follow DP 1.4 spec.
V4: style changes
V5: typo
V6: print statement revisions, DP_REV to DPCD_REV, comment correction
V7: typo
V8: Style
V9: Strip out DPCD_REV_XX into seperate patch
v10: DPCD_REV_XX to DP_DPCD_REV_XX
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180504221800.17830-2-matthew.s.atwood@intel.com
|
|
As more differentation occurs between DP spec. Its useful to have these
as macros in a drm_dp_helper.
v2: DPCD_REV_XX to DP_DPCD_REV_XX
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180504221800.17830-1-matthew.s.atwood@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata fixes from Tejun Heo:
"An earlier commit to add reset control for embedded ahci controllers
affected some of the hardware specific drivers and got reverted for
now.
Other than that, just per-device workarounds and trivial changes"
* 'for-4.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
driver core: add __printf verification to __ata_ehi_pushv_desc
ata: fix spelling mistake: "directon" -> "direction"
libata: Apply NOLPM quirk for SanDisk SD7UB3Q*G1001 SSDs
libata: Apply NOLPM quirk for SAMSUNG MZMPC128HBFU-000MV SSD
ata: ahci: mvebu: override ahci_stop_engine for mvebu AHCI
libahci: Allow drivers to override stop_engine
Revert "ata: ahci-platform: add reset control support"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Here are three pin control fixes.
The Intel fixes are the most serious and important things I had queued
since it affects a large portion of deployed Chromebooks.
- Two major fixes for the Intel Cherryview and Sunrisepoint pin
controllers, adjusting numberspaces so that they get aligned with
various messed-up numbers encoded into the BIOS.
- A fix for the Meson driver GPIO pin range"
* tag 'pinctrl-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: sunrisepoint: Align GPIO number space with Windows
pinctrl: cherryview: Associate IRQ descriptors to irqdomain
pinctrl: meson-axg: fix the range of aobus bank
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Sorry for lagging behind on sending the first batch of GPIO fixes for
this cycle. Just too busy conferencing and the weather was too nice.
Here it is anyway: some real important polishing on the error path
facing userspace (tagged for stable as well) and some normal driver
fixes.
- Fix proper IRQ unmasking in the Aspeed driver.
- Do not free unrequested descriptors on the errorpath when creating
line handles from the userspace chardev requested GPIO lines.
- Also fix the errorpath in the linehandle creation function.
- Fix the get/set multiple GPIO lines for a few of the funky
industrial GPIO cards on the ISA bus"
* tag 'gpio-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: pcie-idio-24: Fix off-by-one error in get_multiple loop
gpio: pcie-idio-24: Fix port memory offset for get_multiple/set_multiple callbacks
gpio: pci-idio-16: Fix port memory offset for get_multiple callback
gpio: fix error path in lineevent_create
gpioib: do not free unrequested descriptors
gpio: fix aspeed_gpio unmask irq
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2018-05-08
this is a pull request for 7 patches for net/master.
The first patch is by Jakob Unterwurzacher and increases the severity of
bus-off messages in the generic CAN device infrastructure. The next two patches
are by Uwe Kleine-König and fix the endianess detection in the flexcan driver.
Jimmy Assarsson's patch for the kvaser driver corrects the stats counter for
dropped tx-messages. Geert Uytterhoeven provides one patch and Sergei Shtylyov
two patches for the rcan_canfd device tree binding description.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan
Stefan Schmidt says:
====================
pull-request: ieee802154 2018-05-08
An update from ieee802154 for your *net* tree.
Two fixes for the mcr20a driver, which was being added in the 4.17 merge window,
by Gustavo and myself.
The atusb driver got a change to GFP_KERNEL where no GFP_ATOMIC is needed by
Jia-Ju.
The last and most important fix is from Alex to get IPv6 reassembly working
again for the ieee802154 6lowpan adaptation. This got broken in 4.16 so please
queue this one also up for the 4.16 stable tree.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During request submission, we call the engine->schedule() function so
that we may reorder the active requests as required for inheriting the
new request's priority. This may schedule several tasklets to run on the
local CPU, but we will need to schedule the tasklets again for the new
request. Delay all the local tasklets until the end, so that we only
have to process the queue just once.
v2: Beware PREEMPT_RCU, as then local_bh_disable() is then not a
superset of rcu_read_lock().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180507135731.10587-2-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
|
|
When called from process context tasklet_schedule() defers itself to
ksoftirqd. From experience this may cause unacceptable latencies of over
200ms in executing the submission tasklet, our goal is to reprioritise
the HW execution queue and trigger HW preemption immediately, so disable
bh over the call to schedule and force the tasklet to run afterwards if
scheduled.
v2: Keep rcu_read_lock() around for PREEMPT_RCU
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180507135731.10587-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
|
|
As we flush each test and wait for idle before the next, also switch
back to the kernel context. This helps limit the amount of collateral
damage a test may cause by resetting to the default state each time (and
also helps clean up temporaries used by the test).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180508115312.12628-1-chris@chris-wilson.co.uk
|
|
Fix `[drm:intel_enable_lvds] *ERROR* timed out waiting for panel to
power on` in kernel log at boot time.
Toshiba Satellite Z930 laptops needs between 1 and 2 seconds to power
on its screen during Intel i915 DRM initialization. This currently
results in a `[drm:intel_enable_lvds] *ERROR* timed out waiting for
panel to power on` message appearing in the kernel log during boot
time and when stopping the machine.
This change increases the timeout of the `intel_enable_lvds` function
from 1 to 5 seconds, letting enough time for the Satellite 930 LCD
screen to power on, and suppressing the error message from the kernel
log.
This patch has been successfully tested on Linux 4.14 running on a
Toshiba Satellite Z930.
[vsyrjala: bump the timeout from 2 to 5 seconds to match the DP
code and properly cover the max hw timeout of ~4 seconds, and
drop the comment about the specific machine since this is not
a particulary surprising issue, nor specific to that one machine]
Signed-off-by: Florent Flament <contact@florentflament.com>
Cc: stable@vger.kernel.org
Cc: Pavel Petrovic <ppetrovic@acm.org>
Cc: Sérgio M. Basto <sergio@serjux.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103414
References: https://bugzilla.kernel.org/show_bug.cgi?id=57591
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180419160700.19828-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 280b54ade5914d3b4abe4f0ebe083ddbd4603246)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
