summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-09-27net: fec: remove QUIRK_HAS_RACC from i.mx25Eric Nelson
According to the i.MX25 reference manual, this SoC does not have support for the receive accelerator (RACC) register at offset 0x1C4. http://www.nxp.com/files/dsp/doc/ref_manual/IMX25RM.pdf Signed-off-by: Eric Nelson <eric@nelint.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-27bpf: Set register type according to is_valid_access()Mickaël Salaün
This prevent future potential pointer leaks when an unprivileged eBPF program will read a pointer value from its context. Even if is_valid_access() returns a pointer type, the eBPF verifier replace it with UNKNOWN_VALUE. The register value that contains a kernel address is then allowed to leak. Moreover, this fix allows unprivileged eBPF programs to use functions with (legitimate) pointer arguments. Not an issue currently since reg_type is only set for PTR_TO_PACKET or PTR_TO_PACKET_END in XDP and TC programs that can only be loaded as privileged. For now, the only unprivileged eBPF program allowed is for socket filtering and all the types from its context are UNKNOWN_VALUE. However, this fix is important for future unprivileged eBPF programs which could use pointers in their context. Signed-off-by: Mickaël Salaün <mic@digikod.net> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-27bpf samples: update tracex5 sample to use __seccomp_filterNaveen N. Rao
seccomp_phase1() does not exist anymore. Instead, update sample to use __seccomp_filter(). While at it, set max locked memory to unlimited. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-27bpf samples: fix compiler errors with sockex2 and sockex3Naveen N. Rao
These samples fail to compile as 'struct flow_keys' conflicts with definition in net/flow_dissector.h. Fix the same by renaming the structure used in the sample. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-26Input: joydev - recognize devices with Z axis as joysticksVille Ranki
Current implementation of joydev's input_device_id table recognizes only devices with ABS_X, ABS_WHEEL or ABS_THROTTLE axes as joysticks. There are joystick devices that do not have those axes, for example TRC Rudder device. The device in question has ABS_Z, ABS_RX and ABS_RY axes causing it not being detected as joystick. This patch adds ABS_Z to the input_device_id list allowing devices with ABS_Z axis to be detected correctly. Signed-off-by: Ville Ranki <ville.ranki@iki.fi> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-09-26scsi: Avoid that toggling use_blk_mq triggers a memory leakBart Van Assche
This patch avoids that the following memory leak is triggered if use_blk_mq is disabled after a SCSI host has been allocated by the ib_srp driver and before the same SCSI host is freed: unreferenced object 0xffff8803a168c568 (size 256): backtrace: [<ffffffff81620c95>] kmemleak_alloc+0x45/0xa0 [<ffffffff811bb104>] __kmalloc_node+0x1e4/0x400 [<ffffffff81309fe4>] blk_mq_alloc_tag_set+0xb4/0x230 [<ffffffff814731b7>] scsi_mq_setup_tags+0xc7/0xd0 [<ffffffff81469c26>] scsi_add_host_with_dma+0x216/0x2d0 [<ffffffffa064bef5>] srp_create_target+0xe55/0x13d0 [ib_srp] [<ffffffff8143ce23>] dev_attr_store+0x13/0x20 [<ffffffff8125f030>] sysfs_kf_write+0x40/0x50 [<ffffffff8125e397>] kernfs_fop_write+0x137/0x1c0 [<ffffffff811d8c13>] __vfs_write+0x23/0x140 [<ffffffff811d92e0>] vfs_write+0xb0/0x190 [<ffffffff811da5b4>] SyS_write+0x44/0xa0 [<ffffffff8162c8a5>] entry_SYSCALL_64_fastpath+0x18/0xa8 Fixes: 9aa9cc4221f5 ("scsi: remove the disable_blk_mq host flag") Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: <stable@vger.kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-26net: tg3: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-26iwlwifi: mvm: initialise ADD_STA before sending it to the firmwareEmmanuel Grumbach
When we unshare a queue, the ADD_STA was not properly initialised. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-26iwlwifi: allow error table address new rangeSara Sharon
The firmware has a new smart linker, and this table can now be in ICCM or in SMEM. It is not hardcoded, but depends on code size. Allow the full range. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-26iwlwifi: mvm: fix typo in TC_CMD_SEC_KEY_FROM_TABLEEmmanuel Grumbach
This define should really be TX_CMD_SEC_KEY_FROM_TABLE Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-26iwlwifi: remove support for fw older than -17 and -22Luca Coelho
FW versions older than -17 for 3160 and 7260 and older than -22 for newer NICs are not supported anymore. Don't load these versions and remove code that handles them. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-26brcmfmac: drop unused fields from struct brcmf_pubRafał Miłecki
They seem to be there from the first day. We calculate these values but never use them. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26brcmfmac: fix memory leak in brcmf_fill_bss_paramRafał Miłecki
This function is called from get_station callback which means that every time user space was getting/dumping station(s) we were leaking 2 KiB. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Fixes: 1f0dc59a6de ("brcmfmac: rework .get_station() callback") Cc: stable@vger.kernel.org # 4.2+ Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26rtl8xxxu: Stop log spam from each successful interruptLarry Finger
As soon as debugging is turned on, the logs are filled with messages reporting the interrupt status. As this quantity is usually zero, this output is not needed. In fact, there will be a report if the status is not zero, thus the debug line in question could probably be deleted. Rather than taking that action, I have changed it to only be printed when the newly added RTL8XXXU_DEBUG_INTERRUPT bit is set in the debug mask. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26rtl8xxxu: Use a struct rtl8xxxu_fileops * in rtl8xxxu_init_device()Jes Sorensen
This saves some 217, or about, derefences of priv->fops. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26rtl8xxxu: Clean up llt_init() APIJes Sorensen
Remove last_tx_page argument from the llt_init() function. The rtl8xxxu_fileops structure contains the correct TX_TOTAL_PAGE_NUM value for the device, and rtl8xxxu_auto_llt_table() doesn't need to know the value in the first place. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26rtl8xxxu: Fix off by one error calculating pubqJes Sorensen
This was detected tracing the 8188eu driver, but doesn't seem to make any difference when using it. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26mwifiex: code rearrangement in mwifiex_usb_host_to_card()Amitkumar Karwar
This patch helps get rid of goto statement and improves readability. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26mwifiex: fix race condition causing tx timeoutCathy Luo
It's been observed that in a corner case mwifiex_usb_tx_complete() gets called before we exit from mwifiex_usb_host_to_card() after submitting the urb. 'data_sent' flag remains set in this case. It blocks further Tx packets and triggers watchdog timeout. The problem is fixed by setting data_sent and port_block flag at correct place. Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Shengzhen Li <szli@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26mwifiex: fix kernel crash for USB chipsetsCathy Luo
Following crash issue is observed during TCP traffic stress test [ 2253.625439] NMI watchdog: BUG: soft lockup - CPU#3 stuck for 22s! [kworker/u17:1:5191] [ 2253.625520] Call Trace: [ 2253.625527] [<ffffffffc0b47030>] ? moal_spin_lock+0x30/0x30 [usb8xxx] [ 2253.625533] [<ffffffffc0ac3ceb>] ? wlan_wmm_lists_empty+0xb/0xf0 [mlan] [ 2253.625537] [<ffffffffc0ab0ea3>] mlan_main_process+0x1b3/0x720 [mlan] [ 2253.625540] [<ffffffffc0b337f5>] woal_main_work_queue+0x45/0x80 [usb8xxx] [ 2253.625543] [<ffffffff8108aaf0>] process_one_work+0x150/0x3f0 [ 2253.625545] [<ffffffff8108b1e1>] worker_thread+0x121/0x520 [ 2253.625547] [<ffffffff8108b0c0>] ? rescuer_thread+0x330/0x330 [ 2253.625549] [<ffffffff81090222>] kthread+0xd2/0xf0 [ 2253.625551] [<ffffffff81090150>] ? kthread_create_on_node+0x1c0/0x1c0 [ 2253.625553] [<ffffffff8179423c>] ret_from_fork+0x7c/0xb0 [ 2253.625555] [<ffffffff81090150>] ? kthread_create_on_node+0x1c0/0x1c0 In mwifiex_usb_tx_complete(), we are updating port->block_status first and then freeing the skb attached to that URB. We may end up attaching new skb to URB in a corner case and same will be freed. This results in the kernel crash. The problem is solved by changing the sequence. Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Shengzhen Li <szli@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26brcmfmac: simplify mapping of auth typeHante Meuleman
The 802.11 standard only has four valid auth type configurations of which our firmware only supports two, ie. Open System and Shared Key. Simplify the mapping falling back to automatic for other types specified by user-space. Reviewed-by: Arend Van Spriel <arend.vanspriel@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Signed-off-by: Hante Meuleman <hante.meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26brcmfmac: fix out of bound access on clearing wowl wake indicatorHante Meuleman
Clearing the wowl wakeindicator happens with a rather odd construction where the string "clear" is used to set the iovar wowl_wakeind. This was implemented incorrectly as it caused an out of bound access. Use an intermediate variable of correct length and copy string in that. Problem was found using coverity. Reviewed-by: Arend Van Spriel <arend.vanspriel@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Signed-off-by: Hante Meuleman <hante.meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26brcmfmac: fix clearing entry IPv6 addressHante Meuleman
When IPv6 address is to be cleared there is a possible out of bound access. But also the clearing of the last entry and the adjustment of total number of stored IPv6 addresses is not updated. This patch fixes that bug. Bug was found using coverity. Reviewed-by: Arend Van Spriel <arend.vanspriel@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Signed-off-by: Hante Meuleman <hante.meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26brcmfmac: remove unnecessary null pointer checkHante Meuleman
in the function brcmf_bus_start() in the exception handling a check is made to dermine whether ifp is null, though this is not possible. Removing the unnessary check. Reviewed-by: Arend Van Spriel <arend.vanspriel@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Signed-off-by: Hante Meuleman <hante.meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26brcmfmac: remove worker from .ndo_set_mac_address() callbackArend Van Spriel
As it turns out there is no need to use a worker for the callback because it is not called from atomic context. Reported-by: Dan Williams <dcbw@redhat.com> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26brcmfmac: initialize variable in brcmf_sdiod_regrl()Arend Van Spriel
In case of an error the variable returned is uninitialized. The caller will probably check the error code before using it, but better assure it is set to zero. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26brcmfmac: fix memory leak in brcmf_flowring_add_tdls_peer()Arend Van Spriel
In the error paths in brcmf_flowring_add_tdls_peer() the allocated resource should be freed. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26brcmfmac: rework pointer trickery in brcmf_proto_bcdc_query_dcmd()Arend Van Spriel
The variable info is assigned to point to bcdc->msg[1], which is the same as pointing to bcdc->buf. As that is what we want to access make it clear by fixing the assignment. This also avoid out-of-bounds errors from static analyzers are bcdc->msg[1] is not in the structure definition. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26brcmfmac: ignore 11d configuration errorsHante Meuleman
802.11d is not always supported by firmware anymore. Currently the AP configuration of 11d will cause an abort if the ioctl set is failing. This behavior is not correct and the error should be ignored. Reviewed-by: Arend Van Spriel <arend.vanspriel@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Signed-off-by: Hante Meuleman <hante.meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26mwifiex: cfg80211 set_default_mgmt_key handlerGanapathi Bhat
Previously device used to start using IGTK key as Tx key as soon as it gets downloaded in add_key(). This patch implements set_default_mgmt_key handler. We will update Tx key ID in set_default_mgmt_key(). Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26wlcore: wl18xx: Use chip specific configuration firmwareTony Lindgren
Use the wl18xx specific config firmware we now have available. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26wlcore: Fix config firmware loading issuesTony Lindgren
Booting multiple wl12xx and wl18xx devices using the same rootfs is a pain. You currently have to symlink the right nvs file depending on the wl12xx type. For example, with wl1271-nvs.bin being a symlink to wl127x-nvs.bin by default and trying to bring up a wl128x based device: wlcore: ERROR nvs size is not as expected: 1113 != 912 wlcore: ERROR NVS file is needed during boot wlcore: ERROR NVS file is needed during boot wlcore: ERROR firmware boot failed despite 3 retries Note that wl18xx uses a separate config firmware wl18xx-conf.bin that can be generated with tools using the following two git repos: git.ti.com/wilink8-wlan/18xx-ti-utils git.ti.com/wilink8-wlan/wl18xx_fw So let's not configure the nvs file for wl18xx as it's not needed AFAIK. If it turns out that we also need the nvs file for wl18xx, we can just add it to the config firmware data for wl18xx. Let's fix the issue by using the chip specific config firmware data, and make sure we produce understandable warnings if something is missing. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26wlcore: spi: Populate config firmware dataTony Lindgren
Configure the config firmware names and make it available in platform data. Let's also fix the order of the struct wilink_family_data while at it. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26wlcore: sdio: Populate config firmware dataTony Lindgren
Configure the config firmware names and make it available in platform data. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26wlcore: Prepare family to fix nvs file handlingTony Lindgren
Move struct wilink_family_data to be available for all TI WLAN variants. And fix familiy typo, it should be just family. Looks like wl12xx use two different nvs.bin files and wl18xx uses a different conf.bin file. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26Merge branch 'bnx2x-fix-page-allocation-failure'David S. Miller
Jason Baron says: ==================== bnx2x: page allocation failure While configuring ~500 multicast addrs, we ran into high order page allocation failures. They don't need to be high order, and thus I'm proposing to split them into at most PAGE_SIZE allocations. Below is a sample failure. [1201902.617882] bnx2x: [bnx2x_set_mc_list:12374(eth0)]Failed to create multicast MACs list: -12 [1207325.695021] kworker/1:0: page allocation failure: order:2, mode:0xc020 [1207325.702059] CPU: 1 PID: 15805 Comm: kworker/1:0 Tainted: G W [1207325.712940] Hardware name: SYNNEX CORPORATION 1x8-X4i SSD 10GE/S5512LE, BIOS V8.810 05/16/2013 [1207325.722284] Workqueue: events bnx2x_sp_rtnl_task [bnx2x] [1207325.728206] 0000000000000000 ffff88012d873a78 ffffffff8267f7c7 000000000000c020 [1207325.736754] 0000000000000000 ffff88012d873b08 ffffffff8212f8e0 fffffffc00000003 [1207325.745301] ffff88041ffecd80 ffff880400000030 0000000000000002 0000c0206800da13 [1207325.753846] Call Trace: [1207325.756789] [<ffffffff8267f7c7>] dump_stack+0x4d/0x63 [1207325.762426] [<ffffffff8212f8e0>] warn_alloc_failed+0xe0/0x130 [1207325.768756] [<ffffffff8213c898>] ? wakeup_kswapd+0x48/0x140 [1207325.774914] [<ffffffff82132afc>] __alloc_pages_nodemask+0x2bc/0x970 [1207325.781761] [<ffffffff82173691>] alloc_pages_current+0x91/0x100 [1207325.788260] [<ffffffff8212fa1e>] alloc_kmem_pages+0xe/0x10 [1207325.794329] [<ffffffff8214c9c8>] kmalloc_order+0x18/0x50 [1207325.800227] [<ffffffff8214ca26>] kmalloc_order_trace+0x26/0xb0 [1207325.806642] [<ffffffff82451c68>] ? _xfer_secondary_pool+0xa8/0x1a0 [1207325.813404] [<ffffffff8217cfda>] __kmalloc+0x19a/0x1b0 [1207325.819142] [<ffffffffa02fe975>] bnx2x_set_rx_mode_inner+0x3d5/0x590 [bnx2x] [1207325.827000] [<ffffffffa02ff52d>] bnx2x_sp_rtnl_task+0x28d/0x760 [bnx2x] [1207325.834197] [<ffffffff820695d4>] process_one_work+0x134/0x3c0 [1207325.840522] [<ffffffff82069981>] worker_thread+0x121/0x460 [1207325.846585] [<ffffffff82069860>] ? process_one_work+0x3c0/0x3c0 [1207325.853089] [<ffffffff8206f039>] kthread+0xc9/0xe0 [1207325.858459] [<ffffffff82070000>] ? notify_die+0x10/0x40 [1207325.864263] [<ffffffff8206ef70>] ? kthread_create_on_node+0x180/0x180 [1207325.871288] [<ffffffff826852d2>] ret_from_fork+0x42/0x70 [1207325.877183] [<ffffffff8206ef70>] ? kthread_create_on_node+0x180/0x180 v2: -make use of list_next_entry() -only use PAGE_SIZE allocations ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-26bnx2x: allocate mac filtering pending list in PAGE_SIZE incrementsJason Baron
Currently, we can have high order page allocations that specify GFP_ATOMIC when configuring multicast MAC address filters. For example, we have seen order 2 page allocation failures with ~500 multicast addresses configured. Convert the allocation for the pending list to be done in PAGE_SIZE increments. Signed-off-by: Jason Baron <jbaron@akamai.com> Cc: Yuval Mintz <Yuval.Mintz@qlogic.com> Cc: Ariel Elior <Ariel.Elior@qlogic.com> Acked-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-26bnx2x: allocate mac filtering 'mcast_list' in PAGE_SIZE incrementsJason Baron
Currently, we can have high order page allocations that specify GFP_ATOMIC when configuring multicast MAC address filters. For example, we have seen order 2 page allocation failures with ~500 multicast addresses configured. Convert the allocation for 'mcast_list' to be done in PAGE_SIZE increments. Signed-off-by: Jason Baron <jbaron@akamai.com> Cc: Yuval Mintz <Yuval.Mintz@qlogic.com> Cc: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-26Merge tag 'iwlwifi-next-for-kalle-2016-09-19-2' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next * added support for MU-MIMO sniffer * added support for RRM by scan * added support for packet injection * migrate to devm memory allocation handling * some fixes, mostly in DQA and new HW support * other generic cleanups
2016-09-26nfp: bpf: improve handling for disabled BPF syscallArnd Bergmann
I stumbled over a new warning during randconfig testing, with CONFIG_BPF_SYSCALL disabled: drivers/net/ethernet/netronome/nfp/nfp_net_offload.c: In function 'nfp_net_bpf_offload': drivers/net/ethernet/netronome/nfp/nfp_net_offload.c:263:3: error: '*((void *)&res+4)' may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/net/ethernet/netronome/nfp/nfp_net_offload.c:263:3: error: 'res.n_instr' may be used uninitialized in this function [-Werror=maybe-uninitialized] As far as I can tell, this is a false positive caused by the compiler getting confused about a function that is partially inlined, but it's easy to avoid while improving the code: The nfp_bpf_jit() stub helper for that configuration is unusual as it is defined in a header file but not marked 'static inline'. By moving the compile-time check into the caller using the IS_ENABLED() macro, we can remove that stub and simplify the nfp_net_bpf_offload_prepare() function enough to unconfuse the compiler. Fixes: 7533fdc0f77f ("nfp: bpf: add hardware bpf offload") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-26net: bcmgenet: remove unused function in bcmgenet.cBaoyou Xie
We get 1 warning when building kernel with W=1: drivers/net/ethernet/broadcom/genet/bcmgenet.c:2763:5: warning: no previous prototype for 'bcmgenet_hfb_add_filter' [-Wmissing-prototypes] In fact, this function is implemented in drivers/net/ethernet/broadcom/genet/bcmgenet.c, but be called by no one, thus can be removed. So this patch removes the unused functions. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-26cxgb4: mark symbols static where possibleBaoyou Xie
We get 10 warnings when building kernel with W=1: drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:304:5: warning: no previous prototype for 'cxgb4_dcb_enabled' [-Wmissing-prototypes] drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:194:5: warning: no previous prototype for 'setup_sge_queues_uld' [-Wmissing-prototypes] drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:241:6: warning: no previous prototype for 'free_sge_queues_uld' [-Wmissing-prototypes] drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:268:5: warning: no previous prototype for 'cfg_queues_uld' [-Wmissing-prototypes] drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:344:6: warning: no previous prototype for 'free_queues_uld' [-Wmissing-prototypes] drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:353:5: warning: no previous prototype for 'request_msix_queue_irqs_uld' [-Wmissing-prototypes] drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:379:6: warning: no previous prototype for 'free_msix_queue_irqs_uld' [-Wmissing-prototypes] drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:393:6: warning: no previous prototype for 'name_msix_vecs_uld' [-Wmissing-prototypes] drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:433:6: warning: no previous prototype for 'enable_rx_uld' [-Wmissing-prototypes] drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:442:6: warning: no previous prototype for 'quiesce_rx_uld' [-Wmissing-prototypes] In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. so this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-26net: mvneta: mark symbols static where possibleBaoyou Xie
We get 2 warnings when building kernel with W=1: drivers/net/ethernet/marvell/mvneta.c:639:27: warning: no previous prototype for 'mvneta_get_stats64' [-Wmissing-prototypes] drivers/net/ethernet/marvell/mvneta.c:3529:5: warning: no previous prototype for 'mvneta_ethtool_set_link_ksettings' [-Wmissing-prototypes] In fact, these two functions are only used in the file in which they are declared and don't need a declaration, but can be made static. so this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-26net: hip04: mark tx_done() staticBaoyou Xie
We get 1 warning when building kernel with W=1: drivers/net/ethernet/hisilicon/hip04_eth.c:603:22: warning: no previous prototype for 'tx_done' [-Wmissing-prototypes] In fact, this function is only used in the file in which it is declared and don't need a declaration, but can be made static. so this patch marks this function with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-26net: hisilicon: mark symbols static where possibleBaoyou Xie
We get 2 warnings when building kernel with W=1: drivers/net/ethernet/hisilicon/hisi_femac.c:943:5: warning: no previous prototype for 'hisi_femac_drv_suspend' [-Wmissing-prototypes] drivers/net/ethernet/hisilicon/hisi_femac.c:960:5: warning: no previous prototype for 'hisi_femac_drv_resume' [-Wmissing-prototypes] In fact, these two functions are only used in the file in which they are declared and don't need a declaration, but can be made static. so this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-25Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2016-09-25 Here are a few more Bluetooth & 802.15.4 patches for the 4.9 kernel that have popped up during the past week: - New USB ID for QCA_ROME Bluetooth device - NULL pointer dereference fix for Bluetooth mgmt sockets - Fixes for BCSP driver - Fix for updating LE scan response Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-25net: dsa: mv88e6xxx: fix non static symbol warningsWei Yongjun
Fixes the following sparse warnings: drivers/net/dsa/mv88e6xxx/chip.c:219:5: warning: symbol 'mv88e6xxx_port_read' was not declared. Should it be static? drivers/net/dsa/mv88e6xxx/chip.c:227:5: warning: symbol 'mv88e6xxx_port_write' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-25be2net: fix non static symbol warningsWei Yongjun
Fixes the following sparse warnings: drivers/net/ethernet/emulex/benet/be_main.c:47:25: warning: symbol 'be_err_recovery_workq' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_main.c:63:25: warning: symbol 'be_wq' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-25net: smc91x: take into account register shiftRobert Jarzmik
This aligns smc91x with its cousin, namely smc911x.c. This also allows the driver to run also in a device-tree based lubbock board build, on which it was tested. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-25ipmr, ip6mr: fix scheduling while atomic and a deadlock with ipmr_get_routeNikolay Aleksandrov
Since the commit below the ipmr/ip6mr rtnl_unicast() code uses the portid instead of the previous dst_pid which was copied from in_skb's portid. Since the skb is new the portid is 0 at that point so the packets are sent to the kernel and we get scheduling while atomic or a deadlock (depending on where it happens) by trying to acquire rtnl two times. Also since this is RTM_GETROUTE, it can be triggered by a normal user. Here's the sleeping while atomic trace: [ 7858.212557] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620 [ 7858.212748] in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper/0 [ 7858.212881] 2 locks held by swapper/0/0: [ 7858.213013] #0: (((&mrt->ipmr_expire_timer))){+.-...}, at: [<ffffffff810fbbf5>] call_timer_fn+0x5/0x350 [ 7858.213422] #1: (mfc_unres_lock){+.....}, at: [<ffffffff8161e005>] ipmr_expire_process+0x25/0x130 [ 7858.213807] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.8.0-rc7+ #179 [ 7858.213934] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 7858.214108] 0000000000000000 ffff88005b403c50 ffffffff813a7804 0000000000000000 [ 7858.214412] ffffffff81a1338e ffff88005b403c78 ffffffff810a4a72 ffffffff81a1338e [ 7858.214716] 000000000000026c 0000000000000000 ffff88005b403ca8 ffffffff810a4b9f [ 7858.215251] Call Trace: [ 7858.215412] <IRQ> [<ffffffff813a7804>] dump_stack+0x85/0xc1 [ 7858.215662] [<ffffffff810a4a72>] ___might_sleep+0x192/0x250 [ 7858.215868] [<ffffffff810a4b9f>] __might_sleep+0x6f/0x100 [ 7858.216072] [<ffffffff8165bea3>] mutex_lock_nested+0x33/0x4d0 [ 7858.216279] [<ffffffff815a7a5f>] ? netlink_lookup+0x25f/0x460 [ 7858.216487] [<ffffffff8157474b>] rtnetlink_rcv+0x1b/0x40 [ 7858.216687] [<ffffffff815a9a0c>] netlink_unicast+0x19c/0x260 [ 7858.216900] [<ffffffff81573c70>] rtnl_unicast+0x20/0x30 [ 7858.217128] [<ffffffff8161cd39>] ipmr_destroy_unres+0xa9/0xf0 [ 7858.217351] [<ffffffff8161e06f>] ipmr_expire_process+0x8f/0x130 [ 7858.217581] [<ffffffff8161dfe0>] ? ipmr_net_init+0x180/0x180 [ 7858.217785] [<ffffffff8161dfe0>] ? ipmr_net_init+0x180/0x180 [ 7858.217990] [<ffffffff810fbc95>] call_timer_fn+0xa5/0x350 [ 7858.218192] [<ffffffff810fbbf5>] ? call_timer_fn+0x5/0x350 [ 7858.218415] [<ffffffff8161dfe0>] ? ipmr_net_init+0x180/0x180 [ 7858.218656] [<ffffffff810fde10>] run_timer_softirq+0x260/0x640 [ 7858.218865] [<ffffffff8166379b>] ? __do_softirq+0xbb/0x54f [ 7858.219068] [<ffffffff816637c8>] __do_softirq+0xe8/0x54f [ 7858.219269] [<ffffffff8107a948>] irq_exit+0xb8/0xc0 [ 7858.219463] [<ffffffff81663452>] smp_apic_timer_interrupt+0x42/0x50 [ 7858.219678] [<ffffffff816625bc>] apic_timer_interrupt+0x8c/0xa0 [ 7858.219897] <EOI> [<ffffffff81055f16>] ? native_safe_halt+0x6/0x10 [ 7858.220165] [<ffffffff810d64dd>] ? trace_hardirqs_on+0xd/0x10 [ 7858.220373] [<ffffffff810298e3>] default_idle+0x23/0x190 [ 7858.220574] [<ffffffff8102a20f>] arch_cpu_idle+0xf/0x20 [ 7858.220790] [<ffffffff810c9f8c>] default_idle_call+0x4c/0x60 [ 7858.221016] [<ffffffff810ca33b>] cpu_startup_entry+0x39b/0x4d0 [ 7858.221257] [<ffffffff8164f995>] rest_init+0x135/0x140 [ 7858.221469] [<ffffffff81f83014>] start_kernel+0x50e/0x51b [ 7858.221670] [<ffffffff81f82120>] ? early_idt_handler_array+0x120/0x120 [ 7858.221894] [<ffffffff81f8243f>] x86_64_start_reservations+0x2a/0x2c [ 7858.222113] [<ffffffff81f8257c>] x86_64_start_kernel+0x13b/0x14a Fixes: 2942e9005056 ("[RTNETLINK]: Use rtnl_unicast() for rtnetlink unicasts") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-23 14:24:57 +0000