| Age | Commit message (Collapse) | Author |
|---|
|
Unfortunately, my build fix for when time travel mode isn't
enabled broke time travel mode, because I forgot that we need
to use the timer time after the timer has been marked disabled,
and thus need to leave the time stored instead of zeroing it.
Fix that by splitting the inline into two, so we can call only
the _mode() one in the relevant code path.
Fixes: b482e48d29f1 ("um: fix build without CONFIG_UML_TIME_TRAVEL_SUPPORT")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
40GbE Intel Wired LAN Driver Updates 2019-08-22
This series contains updates to i40e driver only.
Arnd Bergmann reduces the stack usage which was causing warnings on
32-bit architectures due to large structure sizes for 2 functions
getting inlined, so use noinline_for_stack to prevent the compilers from
combining the 2 functions.
Mauro S. M. Rodrigues fixes an issue when reading an EEPROM from SFP
modules that comply with SFF-8472 but do not implement the Digital
Diagnostic Monitoring (DDM) interface for i40e.
Huhai found we were not checking the return value for configuring the
transmit ring and continuing with XDP configuration of the transmit
ring.
Beilei fixes an issue of shifting signed 32-bit integers.
Sylwia adds support for "packet drop mode" to the MAC configuration for
admin queue command. This bit controls the behavior when a no-drop
packet is blocking a TC queue. Adds support for persistent LLDP by
checking the LLDP flag and reading the LLDP from the NVM when enabled.
Adrian fixes the "recovery mode" check to take into account which device
we are on, since x710 devices have 4 register values to check for status
and x722 devices only have 2 register values to check.
Piotr Azarewicz bumps the supported firmware API version to 1.9 which
extends the PHY access admin queue command support.
Jake makes sure the traffic class stats for a VEB are reset when the VEB
stats are reset.
Slawomir fixes a NULL pointer dereference where the VSI pointer was not
updated before passing it to the i40e_set_vf_mac() when the VF is in a
reset state, so wait for the reset to complete.
Grzegorz removes the i40e_update_dcb_config() which was not using the
correct NVM reads, so call i40e_init_dcb() in its place to correctly
update the DCB configuration.
Piotr Kwapulinski expands the scope of i40e_set_mac_type() since this is
needed during probe to determine if we are in recovery mode. Fixed the
driver reset path when in recovery mode.
Marcin fixed an issue where we were breaking out of a loop too early
when trying to get the PHY capabilities.
v2: Combined patch 7 & 9 in the original series, since both patches
bumped firmware API version. Also combined patches 12 & 13 in the
original series, since one increased the scope of checking for MAC
and the follow-on patch made use of function within the new scope.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The outer poll loop checks for whether we need to reschedule, and
returns to userspace if we do. However, it's possible to get stuck
in the inner loop as well, if the CPU we are running on needs to
reschedule to finish the IO work.
Add the need_resched() check in the inner loop as well. This fixes
a potential hang if the kernel is configured with
CONFIG_PREEMPT_VOLUNTARY=y.
Reported-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- Reset both NVIDIA GPU and HDA in ThinkPad P50 quirk, which was broken
by another quirk that enabled the HDA device (Lyude Paul)
- Fix pciebus-howto.rst documentation filename typo (Bjorn Helgaas)
* tag 'pci-v5.3-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
Documentation PCI: Fix pciebus-howto.rst filename typo
PCI: Reset both NVIDIA GPU and HDA in ThinkPad P50 workaround
|
|
Dump WQE shall not include Ethernet segment. Define mlx5e_dump_wqe to be
used for "Dump WQEs" instead of sharing it with the general mlx5e_tx_wqe
layout.
Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
For TLS WQEs, metadata info did not include num_bytes. Due to this issue,
tx_tls_dump_bytes counter did not increment.
Modify tx_fill_wi() to fill num bytes. When it is called for non-traffic
WQE, zero is expected.
Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
When fw fatal error occurs, poll health() first detects and reports on a
fw error. Afterwards, it detects and reports on the fw fatal error
itself.
That can cause a long delay in fw fatal error handling which waits in a
queue for the fw error handling to be finished. The fw error handle will
try asking for fw core dump command while fw in fatal state may not
respond and driver will wait for command timeout.
Changing the flow to detect and handle first fw fatal errors and only if
no fatal error detected look for a fw error to handle.
Fixes: d1bf0e2cc4a6 ("net/mlx5: Report devlink health on FW issues")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Crdump repeats itself every chunk of 256bytes.
That is due to bug of missing progressing offset while copying the data
from buffer to devlink_fmsg.
Fixes: 9b1f29823605 ("net/mlx5: Add support for FW fatal reporter dump")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Fixed a bug where driver was breaking out of the loop and
reporting an error without retrying first.
Signed-off-by: Marcin Formela <marcin.formela@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
This patch adds a function to read NVM module data and uses it to
read current LLDP agent configuration from NVM API version 1.8.
Signed-off-by: Sylwia Wnuczko <sylwia.wnuczko@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Driver waits after issuing a reset. When a reset takes too long a driver
gives up. Implemented by invoking PF reset in a loop. After defined
number of unsuccessful PF reset trials it returns error.
Without this patch PF reset fails when NIC is in recovery mode.
So make i40e_set_mac_type() public. i40e driver requires i40e_set_mac_type()
to be public. It is required for recovery mode handling. Without this patch
recovery mode could not be detected in i40e_probe().
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
This patch removes function i40e_update_dcb_config(). Instead of
i40e_update_dcb_config() we use i40e_init_dcb(), which implements the
correct NVM read.
Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Add update to the VSI pointer passed to the i40e_set_vf_mac function.
If VF is in reset state the driver waits in i40e_set_vf_mac function
for the reset to be complete, yet after reset the vsi pointer
that was passed into this function is no longer valid.
The patch updates local VSI pointer directly from pf->vsi array,
by using the id stored in VF pointer (lan_vsi_idx).
Without this commit the driver might occasionally invoke general
protection fault in kernel and disable the OS entirely.
Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
The stats structure for the VEB switch statistics is reset periodically,
but the tc_stats are not reset at the same time.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Upcoming FW increment API version to 1.9 due to Extend PHY access AQ
command support. SW is ready for that support as well.
Signed-off-by: Piotr Azarewicz <piotr.azarewicz@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Function check_recovery_mode had wrong if statement.
Now we check proper FWS1B register values, which are responsible for
the recovery mode. Recovery mode has 4 values for x710 and 2 for x722.
That's why we need 6 different flags which are defined in the code.
Now in the if statement, we recognize type of mac address
and register value.
Without those changes driver could show wrong state.
Signed-off-by: Adrian Podlawski <adrian.podlawski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
This patch adds "drop mode" parameter to set mac config AQ command.
This bit controls the behavior when a no-drop packet is blocking a TC
queue.
0 – The PF driver is notified.
1 – The blocking packet is dropped and then the PF driver is notified.
Signed-off-by: Sylwia Wnuczko <sylwia.wnuczko@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
This patch fixes following error reported by cppcheck:
(error) Shifting signed 32-bit value by 31 bits is undefined behaviour
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
When i40e_configure_tx_ring(vsi->tx_rings[i]) returns an error, we should
exit from i40e_vsi_configure_tx and return the error, instead of continuing
to check whether xdp is enable, and configure the xdp transmit ring.
Signed-off-by: huhai <huhai@kylinos.cn>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Similar to the ixgbe issue fixed in:
655c91414579 ("ixgbe: Check DDM existence in transceiver before access)
i40e has the same issue when reading eeprom from SFP's module that comply
with SFF-8472 but not implement the Digital Diagnostic Monitoring (DDM)
interface described in it. The existence of such area is specified by bit
6 of byte 92, set to 1 if implemented.
Without this patch, due to not checking this bit i40e fails to read SFP
module's eeprom with the follow message:
ethtool -m enP51p1s0f0
Cannot get Module EEPROM data: Input/output error
Because it fails to read the additional 256 bytes in which it was assumed
to exist the DDM data.
Signed-off-by: "Mauro S. M. Rodrigues" <maurosr@linux.vnet.ibm.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
The functions i40e_aq_get_phy_abilities_resp() and i40e_set_fc() both
have giant structure on the stack, which makes each one use stack frames
larger than 500 bytes.
As clang decides one function into the other, we get a warning for
exceeding the frame size limit on 32-bit architectures:
drivers/net/ethernet/intel/i40e/i40e_common.c:1654:23: error: stack frame size of 1116 bytes in function 'i40e_set_fc' [-Werror,-Wframe-larger-than=]
When building with gcc, the inlining does not happen, but i40e_set_fc()
calls i40e_aq_get_phy_abilities_resp() anyway, so they add up on the
kernel stack just as much.
The parts that actually use large stacks don't overlap, so make sure
each one is a separate function, and mark them as noinline_for_stack to
prevent the compilers from combining them again.
Fixes: 0a862b43acc6 ("i40e/i40evf: Add module_types and update_link_info")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
In commit 6096d91af0b6 ("dm space map metadata: fix occasional leak
of a metadata block on resize"), we refactor the commit logic to a new
function 'apply_bops'. But when that logic was replaced in out() the
return value was not stored. This may lead out() returning a wrong
value to the caller.
Fixes: 6096d91af0b6 ("dm space map metadata: fix occasional leak of a metadata block on resize")
Cc: stable@vger.kernel.org
Signed-off-by: ZhangXiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
When btree_split_beneath() splits a node to two new children, it will
allocate two blocks: left and right. If right block's allocation
failed, the left block will be unlocked and marked dirty. If this
happened, the left block'ss content is zero, because it wasn't
initialized with the btree struct before the attempot to allocate the
right block. Upon return, when flushing the left block to disk, the
validator will fail when check this block. Then a BUG_ON is raised.
Fix this by completely initializing the left block before allocating and
initializing the right block.
Fixes: 4dcb8b57df359 ("dm btree: fix leak of bufio-backed block in btree_split_beneath error path")
Cc: stable@vger.kernel.org
Signed-off-by: ZhangXiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Variable err is initialized to a value that is never read and it is
re-assigned later. The initialization is redundant and can be removed.
Addresses-Coverity: ("Unused Value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull more fallthrough fixes from Gustavo A. R. Silva:
"Fix fall-through warnings on arm and mips for multiple configurations"
* tag 'Wimplicit-fallthrough-5.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
video: fbdev: acornfb: Mark expected switch fall-through
scsi: libsas: sas_discover: Mark expected switch fall-through
MIPS: Octeon: Mark expected switch fall-through
power: supply: ab8500_charger: Mark expected switch fall-through
watchdog: wdt285: Mark expected switch fall-through
mtd: sa1100: Mark expected switch fall-through
drm/sun4i: tcon: Mark expected switch fall-through
drm/sun4i: sun6i_mipi_dsi: Mark expected switch fall-through
ARM: riscpc: Mark expected switch fall-through
dmaengine: fsldma: Mark expected switch fall-through
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform fix from Benson Leung:
"Fix a kernel crash during suspend/resume of cros_ec_ishtp"
* tag 'tag-chrome-platform-fixes-for-v5.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_ishtp: fix crash during suspend
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull AFS fixes from David Howells:
- Fix a cell record leak due to the default error not being cleared.
- Fix an oops in tracepoint due to a pointer that may contain an error.
- Fix the ACL storage op for YFS where the wrong op definition is being
used. By luck, this only actually affects the information appearing
in traces.
* tag 'afs-fixes-20190822' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: use correct afs_call_type in yfs_fs_store_opaque_acl2
afs: Fix possible oops in afs_lookup trace event
afs: Fix leak in afs_lookup_cell_rcu()
|
|
If the number of dirty pages to be written back is large,
then writeback_inodes_sb will block waiting for a long time,
causing hung task detection alarm. Therefore, we should limit
the maximum number of pages written back this time, which let
the budget be completed faster. The remaining dirty pages
tend to rely on the writeback mechanism to complete the
synchronization.
Fixes: b6e51316daed ("writeback: separate starting of sync vs opportunistic writeback")
Signed-off-by: Liu Song <liu.song11@zte.com.cn>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Currently on a freshly mounted UBIFS, c->min_log_bytes is 0.
This can lead to a log overrun and make commits fail.
Recent kernels will report the following assert:
UBIFS assert failed: c->lhead_lnum != c->ltail_lnum, in fs/ubifs/log.c:412
c->min_log_bytes can have two states, 0 and c->leb_size.
It controls how much bytes of the log area are reserved for non-bud
nodes such as commit nodes.
After a commit it has to be set to c->leb_size such that we have always
enough space for a commit. While a commit runs it can be 0 to make the
remaining bytes of the log available to writers.
Having it set to 0 right after mount is wrong since no space for commits
is reserved.
Fixes: 1e51764a3c2ac ("UBIFS: add new flash file system")
Reported-and-tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
We unlock after orphan_delete(), so no need to unlock
in the function too.
Reported-by: Han Xu <han.xu@nxp.com>
Fixes: 8009ce956c3d ("ubifs: Don't leak orphans on memory during commit")
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Linux kernel tolerates C++ style comments these days. Actually, the
SPDX License tags for .c files start with //.
On the other hand, uapi headers are written in more strict C, where
the C++ comment style is forbidden.
I simply dropped these lines instead of fixing the comment style.
This code has been always commented out since it was added around
Linux 2.4.9 (i.e. commented out for more than 17 years).
'Maybe later...' will never happen.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
All user level and most in-kernel applications submit WQEs
where the SG list entries are all of a single type.
iSER in particular, however, will send us WQEs with mixed SG
types: sge[0] = kernel buffer, sge[1] = PBL region.
Check and set is_kva on each SG entry individually instead of
assuming the first SGE type carries through to the last.
This fixes iSER over siw.
Fixes: b9be6f18cf9e ("rdma/siw: transmit path")
Reported-by: Krishnamraju Eraparaju <krishna2@chelsio.com>
Tested-by: Krishnamraju Eraparaju <krishna2@chelsio.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Link: https://lore.kernel.org/r/20190822150741.21871-1-bmt@zurich.ibm.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Driver copies FW commands to the HW queue as units of 16 bytes. Some
of the command structures are not exact multiple of 16. So while copying
the data from those structures, the stack out of bounds messages are
reported by KASAN. The following error is reported.
[ 1337.530155] ==================================================================
[ 1337.530277] BUG: KASAN: stack-out-of-bounds in bnxt_qplib_rcfw_send_message+0x40a/0x850 [bnxt_re]
[ 1337.530413] Read of size 16 at addr ffff888725477a48 by task rmmod/2785
[ 1337.530540] CPU: 5 PID: 2785 Comm: rmmod Tainted: G OE 5.2.0-rc6+ #75
[ 1337.530541] Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 1.0.4 08/28/2014
[ 1337.530542] Call Trace:
[ 1337.530548] dump_stack+0x5b/0x90
[ 1337.530556] ? bnxt_qplib_rcfw_send_message+0x40a/0x850 [bnxt_re]
[ 1337.530560] print_address_description+0x65/0x22e
[ 1337.530568] ? bnxt_qplib_rcfw_send_message+0x40a/0x850 [bnxt_re]
[ 1337.530575] ? bnxt_qplib_rcfw_send_message+0x40a/0x850 [bnxt_re]
[ 1337.530577] __kasan_report.cold.3+0x37/0x77
[ 1337.530581] ? _raw_write_trylock+0x10/0xe0
[ 1337.530588] ? bnxt_qplib_rcfw_send_message+0x40a/0x850 [bnxt_re]
[ 1337.530590] kasan_report+0xe/0x20
[ 1337.530592] memcpy+0x1f/0x50
[ 1337.530600] bnxt_qplib_rcfw_send_message+0x40a/0x850 [bnxt_re]
[ 1337.530608] ? bnxt_qplib_creq_irq+0xa0/0xa0 [bnxt_re]
[ 1337.530611] ? xas_create+0x3aa/0x5f0
[ 1337.530613] ? xas_start+0x77/0x110
[ 1337.530615] ? xas_clear_mark+0x34/0xd0
[ 1337.530623] bnxt_qplib_free_mrw+0x104/0x1a0 [bnxt_re]
[ 1337.530631] ? bnxt_qplib_destroy_ah+0x110/0x110 [bnxt_re]
[ 1337.530633] ? bit_wait_io_timeout+0xc0/0xc0
[ 1337.530641] bnxt_re_dealloc_mw+0x2c/0x60 [bnxt_re]
[ 1337.530648] bnxt_re_destroy_fence_mr+0x77/0x1d0 [bnxt_re]
[ 1337.530655] bnxt_re_dealloc_pd+0x25/0x60 [bnxt_re]
[ 1337.530677] ib_dealloc_pd_user+0xbe/0xe0 [ib_core]
[ 1337.530683] srpt_remove_one+0x5de/0x690 [ib_srpt]
[ 1337.530689] ? __srpt_close_all_ch+0xc0/0xc0 [ib_srpt]
[ 1337.530692] ? xa_load+0x87/0xe0
...
[ 1337.530840] do_syscall_64+0x6d/0x1f0
[ 1337.530843] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 1337.530845] RIP: 0033:0x7ff5b389035b
[ 1337.530848] Code: 73 01 c3 48 8b 0d 2d 0b 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d fd 0a 2c 00 f7 d8 64 89 01 48
[ 1337.530849] RSP: 002b:00007fff83425c28 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[ 1337.530852] RAX: ffffffffffffffda RBX: 00005596443e6750 RCX: 00007ff5b389035b
[ 1337.530853] RDX: 000000000000000a RSI: 0000000000000800 RDI: 00005596443e67b8
[ 1337.530854] RBP: 0000000000000000 R08: 00007fff83424ba1 R09: 0000000000000000
[ 1337.530856] R10: 00007ff5b3902960 R11: 0000000000000206 R12: 00007fff83425e50
[ 1337.530857] R13: 00007fff8342673c R14: 00005596443e6260 R15: 00005596443e6750
[ 1337.530885] The buggy address belongs to the page:
[ 1337.530962] page:ffffea001c951dc0 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0
[ 1337.530964] flags: 0x57ffffc0000000()
[ 1337.530967] raw: 0057ffffc0000000 0000000000000000 ffffffff1c950101 0000000000000000
[ 1337.530970] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
[ 1337.530970] page dumped because: kasan: bad access detected
[ 1337.530996] Memory state around the buggy address:
[ 1337.531072] ffff888725477900: 00 00 00 00 f1 f1 f1 f1 00 00 00 00 00 f2 f2 f2
[ 1337.531180] ffff888725477980: 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00
[ 1337.531288] >ffff888725477a00: 00 f2 f2 f2 f2 f2 f2 00 00 00 f2 00 00 00 00 00
[ 1337.531393] ^
[ 1337.531478] ffff888725477a80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1337.531585] ffff888725477b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1337.531691] ==================================================================
Fix this by passing the exact size of each FW command to
bnxt_qplib_rcfw_send_message as req->cmd_size. Before sending
the command to HW, modify the req->cmd_size to number of 16 byte units.
Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1566468170-489-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
It seems that 'yfs_RXYFSStoreOpaqueACL2' should be use in
yfs_fs_store_opaque_acl2().
Fixes: f5e4546347bc ("afs: Implement YFS ACL setting")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
The afs_lookup trace event can cause the following:
[ 216.576777] BUG: kernel NULL pointer dereference, address: 000000000000023b
[ 216.576803] #PF: supervisor read access in kernel mode
[ 216.576813] #PF: error_code(0x0000) - not-present page
...
[ 216.576913] RIP: 0010:trace_event_raw_event_afs_lookup+0x9e/0x1c0 [kafs]
If the inode from afs_do_lookup() is an error other than ENOENT, or if it
is ENOENT and afs_try_auto_mntpt() returns an error, the trace event will
try to dereference the error pointer as a valid pointer.
Use IS_ERR_OR_NULL to only pass a valid pointer for the trace, or NULL.
Ideally the trace would include the error value, but for now just avoid
the oops.
Fixes: 80548b03991f ("afs: Add more tracepoints")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Fix a leak on the cell refcount in afs_lookup_cell_rcu() due to
non-clearance of the default error in the case a NULL cell name is passed
and the workstation default cell is used.
Also put a bit at the end to make sure we don't leak a cell ref if we're
going to be returning an error.
This leak results in an assertion like the following when the kafs module is
unloaded:
AFS: Assertion failed
2 == 1 is false
0x2 == 0x1 is false
------------[ cut here ]------------
kernel BUG at fs/afs/cell.c:770!
...
RIP: 0010:afs_manage_cells+0x220/0x42f [kafs]
...
process_one_work+0x4c2/0x82c
? pool_mayday_timeout+0x1e1/0x1e1
? do_raw_spin_lock+0x134/0x175
worker_thread+0x336/0x4a6
? rescuer_thread+0x4af/0x4af
kthread+0x1de/0x1ee
? kthread_park+0xd4/0xd4
ret_from_fork+0x24/0x30
Fixes: 989782dcdc91 ("afs: Overhaul cell database management")
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
If after an MMIO exit to userspace a VCPU is immediately run with an
immediate_exit request, such as when a signal is delivered or an MMIO
emulation completion is needed, then the VCPU completes the MMIO
emulation and immediately returns to userspace. As the exit_reason
does not get changed from KVM_EXIT_MMIO in these cases we have to
be careful not to complete the MMIO emulation again, when the VCPU is
eventually run again, because the emulation does an instruction skip
(and doing too many skips would be a waste of guest code :-) We need
to use additional VCPU state to track if the emulation is complete.
As luck would have it, we already have 'mmio_needed', which even
appears to be used in this way by other architectures already.
Fixes: 0d640732dbeb ("arm64: KVM: Skip MMIO insn after emulation")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
HS200 is not implemented in the driver, but the controller claims it
through caps. Remove it via a quirk, to make sure the mmc core do not try
to enable HS200, as it causes the eMMC initialization to fail.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: bb5f8ea4d514 ("mmc: sdhci-of-at91: introduce driver for the Atmel SDMMC")
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
We can't rely on ->peer_features in calc_target() because it may be
called both when the OSD session is established and open and when it's
not. ->peer_features is not valid unless the OSD session is open. If
this happens on a PG split (pg_num increase), that could mean we don't
resend a request that should have been resent, hanging the client
indefinitely.
In userspace this was fixed by looking at require_osd_release and
get_xinfo[osd].features fields of the osdmap. However these fields
belong to the OSD section of the osdmap, which the kernel doesn't
decode (only the client section is decoded).
Instead, let's drop this feature check. It effectively checks for
luminous, so only pre-luminous OSDs would be affected in that on a PG
split the kernel might resend a request that should not have been
resent. Duplicates can occur in other scenarios, so both sides should
already be prepared for them: see dup/replay logic on the OSD side and
retry_attempt check on the client side.
Cc: stable@vger.kernel.org
Fixes: 7de030d6b10a ("libceph: resend on PG splits if OSD has RESEND_ON_SPLIT")
Link: https://tracker.ceph.com/issues/41162
Reported-by: Jerry Lee <leisurelysw24@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Tested-by: Jerry Lee <leisurelysw24@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
|
|
When ceph_mdsc_do_request returns an error, we can't assume that the
filelock_reply pointer will be set. Only try to fetch fields out of
the r_reply_info when it returns success.
Cc: stable@vger.kernel.org
Reported-by: Hector Martin <hector@marcansoft.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
clear_page_dirty_for_io(page) before mapping->a_ops->invalidatepage().
invalidatepage() clears page's private flag, if dirty flag is not
cleared, the page may cause BUG_ON failure in ceph_set_page_dirty().
Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/40862
Signed-off-by: Erqi Chen <chenerqi@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Calling ceph_buffer_put() in fill_inode() may result in freeing the
i_xattrs.blob buffer while holding the i_ceph_lock. This can be fixed by
postponing the call until later, when the lock is released.
The following backtrace was triggered by fstests generic/070.
BUG: sleeping function called from invalid context at mm/vmalloc.c:2283
in_atomic(): 1, irqs_disabled(): 0, pid: 3852, name: kworker/0:4
6 locks held by kworker/0:4/3852:
#0: 000000004270f6bb ((wq_completion)ceph-msgr){+.+.}, at: process_one_work+0x1b8/0x5f0
#1: 00000000eb420803 ((work_completion)(&(&con->work)->work)){+.+.}, at: process_one_work+0x1b8/0x5f0
#2: 00000000be1c53a4 (&s->s_mutex){+.+.}, at: dispatch+0x288/0x1476
#3: 00000000559cb958 (&mdsc->snap_rwsem){++++}, at: dispatch+0x2eb/0x1476
#4: 000000000d5ebbae (&req->r_fill_mutex){+.+.}, at: dispatch+0x2fc/0x1476
#5: 00000000a83d0514 (&(&ci->i_ceph_lock)->rlock){+.+.}, at: fill_inode.isra.0+0xf8/0xf70
CPU: 0 PID: 3852 Comm: kworker/0:4 Not tainted 5.2.0+ #441
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58-prebuilt.qemu.org 04/01/2014
Workqueue: ceph-msgr ceph_con_workfn
Call Trace:
dump_stack+0x67/0x90
___might_sleep.cold+0x9f/0xb1
vfree+0x4b/0x60
ceph_buffer_release+0x1b/0x60
fill_inode.isra.0+0xa9b/0xf70
ceph_fill_trace+0x13b/0xc70
? dispatch+0x2eb/0x1476
dispatch+0x320/0x1476
? __mutex_unlock_slowpath+0x4d/0x2a0
ceph_con_workfn+0xc97/0x2ec0
? process_one_work+0x1b8/0x5f0
process_one_work+0x244/0x5f0
worker_thread+0x4d/0x3e0
kthread+0x105/0x140
? process_one_work+0x5f0/0x5f0
? kthread_park+0x90/0x90
ret_from_fork+0x3a/0x50
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Calling ceph_buffer_put() in __ceph_build_xattrs_blob() may result in
freeing the i_xattrs.blob buffer while holding the i_ceph_lock. This can
be fixed by having this function returning the old blob buffer and have
the callers of this function freeing it when the lock is released.
The following backtrace was triggered by fstests generic/117.
BUG: sleeping function called from invalid context at mm/vmalloc.c:2283
in_atomic(): 1, irqs_disabled(): 0, pid: 649, name: fsstress
4 locks held by fsstress/649:
#0: 00000000a7478e7e (&type->s_umount_key#19){++++}, at: iterate_supers+0x77/0xf0
#1: 00000000f8de1423 (&(&ci->i_ceph_lock)->rlock){+.+.}, at: ceph_check_caps+0x7b/0xc60
#2: 00000000562f2b27 (&s->s_mutex){+.+.}, at: ceph_check_caps+0x3bd/0xc60
#3: 00000000f83ce16a (&mdsc->snap_rwsem){++++}, at: ceph_check_caps+0x3ed/0xc60
CPU: 1 PID: 649 Comm: fsstress Not tainted 5.2.0+ #439
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58-prebuilt.qemu.org 04/01/2014
Call Trace:
dump_stack+0x67/0x90
___might_sleep.cold+0x9f/0xb1
vfree+0x4b/0x60
ceph_buffer_release+0x1b/0x60
__ceph_build_xattrs_blob+0x12b/0x170
__send_cap+0x302/0x540
? __lock_acquire+0x23c/0x1e40
? __mark_caps_flushing+0x15c/0x280
? _raw_spin_unlock+0x24/0x30
ceph_check_caps+0x5f0/0xc60
ceph_flush_dirty_caps+0x7c/0x150
? __ia32_sys_fdatasync+0x20/0x20
ceph_sync_fs+0x5a/0x130
iterate_supers+0x8f/0xf0
ksys_sync+0x4f/0xb0
__ia32_sys_sync+0xa/0x10
do_syscall_64+0x50/0x1c0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7fc6409ab617
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Calling ceph_buffer_put() in __ceph_setxattr() may end up freeing the
i_xattrs.prealloc_blob buffer while holding the i_ceph_lock. This can be
fixed by postponing the call until later, when the lock is released.
The following backtrace was triggered by fstests generic/117.
BUG: sleeping function called from invalid context at mm/vmalloc.c:2283
in_atomic(): 1, irqs_disabled(): 0, pid: 650, name: fsstress
3 locks held by fsstress/650:
#0: 00000000870a0fe8 (sb_writers#8){.+.+}, at: mnt_want_write+0x20/0x50
#1: 00000000ba0c4c74 (&type->i_mutex_dir_key#6){++++}, at: vfs_setxattr+0x55/0xa0
#2: 000000008dfbb3f2 (&(&ci->i_ceph_lock)->rlock){+.+.}, at: __ceph_setxattr+0x297/0x810
CPU: 1 PID: 650 Comm: fsstress Not tainted 5.2.0+ #437
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58-prebuilt.qemu.org 04/01/2014
Call Trace:
dump_stack+0x67/0x90
___might_sleep.cold+0x9f/0xb1
vfree+0x4b/0x60
ceph_buffer_release+0x1b/0x60
__ceph_setxattr+0x2b4/0x810
__vfs_setxattr+0x66/0x80
__vfs_setxattr_noperm+0x59/0xf0
vfs_setxattr+0x81/0xa0
setxattr+0x115/0x230
? filename_lookup+0xc9/0x140
? rcu_read_lock_sched_held+0x74/0x80
? rcu_sync_lockdep_assert+0x2e/0x60
? __sb_start_write+0x142/0x1a0
? mnt_want_write+0x20/0x50
path_setxattr+0xba/0xd0
__x64_sys_lsetxattr+0x24/0x30
do_syscall_64+0x50/0x1c0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7ff23514359a
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
The bmControls (for UAC1) or bmMixerControls (for UAC2/3) bitmap has a
variable size depending on both input and output pins. Its size is to
fit with input * output bits. The problem is that the input size
can't be determined simply from the unit descriptor itself but it
needs to parse the whole connected sources. Although the
uac_mixer_unit_get_channels() tries to check some possible overflow of
this bitmap, it's incomplete due to the lack of the evaluation of
input pins.
For covering possible overflows, this patch adds the bitmap overflow
check in the loop of input pins in parse_audio_mixer_unit().
Fixes: 0bfe5e434e66 ("ALSA: usb-audio: Check mixer unit descriptors more strictly")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Haiyang Zhang says:
====================
Add software backchannel and mlx5e HV VHCA stats
This patch set adds paravirtual backchannel in software in pci_hyperv,
which is required by the mlx5e driver HV VHCA stats agent.
The stats agent is responsible on running a periodic rx/tx packets/bytes
stats update.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
HV VHCA stats agent is responsible on running a preiodic rx/tx
packets/bytes stats update. Currently the supported format is version
MLX5_HV_VHCA_STATS_VERSION. Block ID 1 is dedicated for statistics data
transfer from the VF to the PF.
The reporter fetch the statistics data from all opened channels, fill it
in a buffer and send it to mlx5_hv_vhca_write_agent.
As the stats layer should include some metadata per block (sequence and
offset), the HV VHCA layer shall modify the buffer before actually send it
over block 1.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Control agent is responsible over of the control block (ID 0). It should
update the PF via this block about every capability change. In addition,
upon block 0 invalidate, it should activate all other supported agents
with data requests from the PF.
Upon agent create/destroy, the invalidate callback of the control agent
is being called in order to update the PF driver about this change.
The control agent is an integral part of HV VHCA and will be created
and destroy as part of the HV VHCA init/cleanup flow.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
HV VHCA is a layer which provides PF to VF communication channel based on
HyperV PCI config channel. It implements Mellanox's Inter VHCA control
communication protocol. The protocol contains control block in order to
pass messages between the PF and VF drivers, and data blocks in order to
pass actual data.
The infrastructure is agent based. Each agent will be responsible of
contiguous buffer blocks in the VHCA config space. This infrastructure will
bind agents to their blocks, and those agents can only access read/write
the buffer blocks assigned to them. Each agent will provide three
callbacks (control, invalidate, cleanup). Control will be invoked when
block-0 is invalidated with a command that concerns this agent. Invalidate
callback will be invoked if one of the blocks assigned to this agent was
invalidated. Cleanup will be invoked before the agent is being freed in
order to clean all of its open resources or deferred works.
Block-0 serves as the control block. All execution commands from the PF
will be written by the PF over this block. VF will ack on those by
writing on block-0 as well. Its format is described by struct
mlx5_hv_vhca_control_block layout.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
