| Age | Commit message (Collapse) | Author |
|---|
|
Commit 19bca6ab75d8 ("KVM: SVM: Fix cross vendor migration issue with
unusable bit") added checking type when setting unusable.
So unusable can be set if present is 0 OR type is 0.
According to the AMD processor manual, long mode ignores the type value
in segment descriptor. And type can be 0 if it is read-only data segment.
Therefore type value is not related to unusable flag.
This patch is based on linux-next v4.12.0-rc3.
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
kvm_skip_emulated_instruction() will return 0 if userspace is
single-stepping the guest.
kvm_skip_emulated_instruction() uses return status convention of exit
handler: 0 means "exit to userspace" and 1 means "continue vm entries".
The problem is that nested_vmx_check_vmptr() return status means
something else: 0 is ok, 1 is error.
This means we would continue executing after a failure. Static checker
noticed it because vmptr was not initialized.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 6affcbedcac7 ("KVM: x86: Add kvm_skip_emulated_instruction and use it.")
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
nbd_config is allocated in nbd_alloc_config(), but never freed.
Fixes: 5ea8d10802ec ("nbd: separate out the config information")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
There is nothing to clear -- nbd_device has just been allocated.
Fold nbd_reset() into its other caller, nbd_config_put().
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
We saw perf IRQ init failures when running Linux kernel in an ACPI
guest without PMU (i.e. pmu=off). This is because perf IRQ is not
present when pmu=off, but arm_pmu_acpi still tries to register
or unregister GSI. This patch addresses the problem by checking
gicc->performance_interrupt. If it is 0, which is the value set
by qemu when pmu=off, we skip the IRQ register/unregister process.
[ 4.069470] bc00: 0000000000040b00 ffff0000089db190
[ 4.070267] [<ffff000008134f80>] enable_percpu_irq+0xdc/0xe4
[ 4.071192] [<ffff000008667cc4>] arm_perf_starting_cpu+0x108/0x10c
[ 4.072200] [<ffff0000080cbdd4>] cpuhp_invoke_callback+0x14c/0x4ac
[ 4.073210] [<ffff0000080ccd3c>] cpuhp_thread_fun+0xd4/0x11c
[ 4.074132] [<ffff0000080f1394>] smpboot_thread_fn+0x1b4/0x1c4
[ 4.075081] [<ffff0000080ec90c>] kthread+0x10c/0x138
[ 4.075921] [<ffff0000080833c0>] ret_from_fork+0x10/0x50
[ 4.076947] genirq: Setting trigger mode 4 for irq 43 failed
(gic_set_type+0x0/0x74)
Signed-off-by: Wei Huang <wei@redhat.com>
[will: add comment justifying deviation from ACPI spec, removed redundant hunk]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Perf has supported ARMv8.1 feature with 16-bit evtCount filed [see c210ae8
arm64: perf: Extend event mask for ARMv8.1], event config should be
extended to 16-bit too, otherwise, if use -e event_name whose event_code
is more than 0x3ff, pmu_config_term will return -EINVAL because function
pmu_format_max_value depends on event config.
This patch extends event config to 16-bit.
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
PCI core requires the NUMA node for the struct pci_host_bridge.dev to
be set by using the pcibus_to_node(struct pci_bus*) API, that on ARM64
systems relies on the struct pci_host_bridge->bus.dev NUMA node.
The struct pci_host_bridge.dev NUMA node is then propagated through
the PCI device hierarchy as PCI devices (and bridges) are enumerated
under it.
Therefore, in order to set-up the PCI NUMA hierarchy appropriately, the
struct pci_host_bridge->bus.dev NUMA node must be set before core
code calls pcibus_to_node(struct pci_bus*) on it so that PCI core can
retrieve the NUMA node for the struct pci_host_bridge.dev device and can
propagate it through the PCI bus tree.
On ARM64 ACPI based systems the struct pci_host_bridge->bus.dev NUMA
node can be set-up in pcibios_root_bridge_prepare() by parsing the root
bridge ACPI device firmware binding.
Add code to the pcibios_root_bridge_prepare() that, when booting with
ACPI, parse the root bridge ACPI device companion NUMA binding and set
the corresponding struct pci_host_bridge->bus.dev NUMA node
appropriately.
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Robert Richter <rrichter@cavium.com>
Tested-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
FUTEX_OP_OPARG_SHIFT instructs the futex code to treat the 12-bit oparg
field as a shift value, potentially leading to a left shift value that
is negative or with an absolute value that is significantly larger then
the size of the type. UBSAN chokes with:
================================================================================
UBSAN: Undefined behaviour in ./arch/arm64/include/asm/futex.h:60:13
shift exponent -1 is negative
CPU: 1 PID: 1449 Comm: syz-executor0 Not tainted 4.11.0-rc4-00005-g977eb52-dirty #11
Hardware name: linux,dummy-virt (DT)
Call trace:
[<ffff200008094778>] dump_backtrace+0x0/0x538 arch/arm64/kernel/traps.c:73
[<ffff200008094cd0>] show_stack+0x20/0x30 arch/arm64/kernel/traps.c:228
[<ffff200008c194a8>] __dump_stack lib/dump_stack.c:16 [inline]
[<ffff200008c194a8>] dump_stack+0x120/0x188 lib/dump_stack.c:52
[<ffff200008cc24b8>] ubsan_epilogue+0x18/0x98 lib/ubsan.c:164
[<ffff200008cc3098>] __ubsan_handle_shift_out_of_bounds+0x250/0x294 lib/ubsan.c:421
[<ffff20000832002c>] futex_atomic_op_inuser arch/arm64/include/asm/futex.h:60 [inline]
[<ffff20000832002c>] futex_wake_op kernel/futex.c:1489 [inline]
[<ffff20000832002c>] do_futex+0x137c/0x1740 kernel/futex.c:3231
[<ffff200008320504>] SYSC_futex kernel/futex.c:3281 [inline]
[<ffff200008320504>] SyS_futex+0x114/0x268 kernel/futex.c:3249
[<ffff200008084770>] el0_svc_naked+0x24/0x28
================================================================================
syz-executor1 uses obsolete (PF_INET,SOCK_PACKET)
sock: process `syz-executor0' is using obsolete setsockopt SO_BSDCOMPAT
This patch attempts to fix some of this by:
* Making encoded_op an unsigned type, so we can shift it left even if
the top bit is set.
* Casting to signed prior to shifting right when extracting oparg
and cmparg
* Consider only the bottom 5 bits of oparg when using it as a left-shift
value.
Whilst I think this catches all of the issues, I'd much prefer to remove
this stuff, as I think it's unused and the bugs are copy-pasted between
a bunch of architectures.
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
It's useless to print machine name and setup arch-specific system
identifiers if of_flat_dt_get_machine_name() return NULL, especially
when ACPI-based boot.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Unfortunately, it turns out that mismatched CPU features in big.LITTLE
systems are starting to appear in the wild. Whilst we should continue to
taint the kernel with CPU_OUT_OF_SPEC for features that differ in ways
that we can't fix up, dumping a useless backtrace out of the cpufeature
code is pointless and irritating.
This patch removes the backtrace from the taint.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
arm64's mm/mmu.c uses vm_area_add_early, struct vm_area and other
definitions but relies on implict inclusion of linux/vmalloc.h which
means that changes in other headers could break the build. Thus, add an
explicit include.
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Generic code expects show_regs() to dump the stack, but arm64's
show_regs() does not. This makes it hard to debug softlockups and
other issues that result in show_regs() being called.
This patch updates arm64's show_regs() to dump the stack, as common
code expects.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
[will: folded in bug_handler fix from mrutland]
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Generic code expects show_regs() to also dump the stack, but arm64's
show_reg() does not do this. Some arm64 callers of show_regs() *only*
want the registers dumped, without the stack.
To enable generic code to work as expected, we need to make
show_regs() dump the stack. Where we only want the registers dumped,
we must use __show_regs().
This patch updates code to use __show_regs() where only registers are
desired. A subsequent patch will modify show_regs().
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Like arch/arm/, we inherit the READ_IMPLIES_EXEC personality flag across
fork(). This is undesirable for a number of reasons:
* ELF files that don't require executable stack can end up with it
anyway
* We end up performing un-necessary I-cache maintenance when mapping
what should be non-executable pages
* Restricting what is executable is generally desirable when defending
against overflow attacks
This patch clears the personality flag when setting up the personality for
newly spwaned native tasks. Given that semi-recent AArch64 toolchains emit
a non-executable PT_GNU_STACK header, userspace applications can already
not rely on READ_IMPLIES_EXEC so shouldn't be adversely affected by this
change.
Cc: <stable@vger.kernel.org>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Dong Bo <dongbo4@huawei.com>
[will: added comment to compat code, rewrote commit message]
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
In descriptor mode, the descriptor running pointer is not maintained
by the interrupt handler, thus, driver finds the running descriptor
from the descriptor pointer field in the CHCRB register.
But, CHCRB::DPTR indicates *next* descriptor pointer, not current.
Thus, The residue calculation will be missed. This patch fixup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
|
|
Users should really consider switching to rmi-smbus instead of plain PS/2.
Notify them that they should report a missing pnpID in the file.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The Synaptics touchpads are now either using i2c-hid or rmi-smbus.
Warn the users if they are missing the rmi-smbus modules and have no
chance of reporting correct data.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Or the user might have the touchpad unbound from PS/2 but never picked
up by rmi-smbus.ko
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
synaptics_query_hardware() was being passed a 'struct synaptics_device_info'
in uninitialized stack memory, then not always initializing all fields.
This caused garbage to show up in certain fields, making the touchpad
unusable.
Fix by zeroing the device info, so all fields default to 0.
Fixes: 6c53694fb222 ("Input: synaptics - split device info into a separate structure")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
When we put the touchscreen controller in low-power mode the irq
pin may trigger (float) and if we then try to read a data packet we
get the following error in dmesg:
[ 478.801017] silead_ts i2c-MSSL1680:00: Data read error -121
This commit disables the irq during suspend/resume fixing this error.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
clk_prepare_enable() can fail here and we must check its return value.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
For a driver that does not set the CPUFREQ_STICKY flag, if all of the
->init() calls fail, cpufreq_register_driver() should return an error.
This will prevent the driver from loading.
Fixes: ce1bcfe94db8 (cpufreq: check cpufreq_policy_list instead of scanning policies for all CPUs)
Cc: 4.0+ <stable@vger.kernel.org> # 4.0+
Signed-off-by: David Arcari <darcari@redhat.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In the Linux kernel, acpi_get_table() "clones" haven't been fully
balanced by acpi_put_table() invocations. In upstream ACPICA, due to
the design change, there are also unbalanced acpi_get_table_by_index()
invocations requiring special care.
acpi_get_table() reference counting mismatches may occor due to that
and printing error messages related to them is not useful at this
point. The strict balanced validation count check should only be
enabled after confirming that all invocations are safe and aligned
with their designed purposes.
Thus this patch removes the error value returned by acpi_tb_get_table()
in that case along with the accompanying error message to fix the
issue.
Fixes: 174cc7187e6f (ACPICA: Tables: Back port acpi_get_table_with_size() and early_acpi_os_unmap_memory() from Linux kernel)
Cc: 4.10+ <stable@vger.kernel.org> # 4.10+
Reported-by: Anush Seetharaman <anush.seetharaman@intel.com>
Reported-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Revert commit 77e9a4aa9de1 (ACPI / button: Change default behavior to
lid_init_state=open) which changed the kernel's behavior on laptops
that boot with closed lids and expect the lid switch state to be
reported accurately by the kernel.
If you boot or resume your laptop with the lid closed on a docking
station while using an external monitor connected to it, both internal
and external displays will light on, while only the external should.
There is a design choice in gdm to only provide the greeter on the
internal display when lit on, so users only see a gray area on the
external monitor. Also, the cursor will not show up as it's by
default on the internal display too.
To "fix" that, users have to open the laptop once and close it once
again to sync the state of the switch with the hardware state.
Even if the "method" operation mode implementation can be buggy on
some platforms, the "open" choice is worse. It breaks docking
stations basically and there is no way to have a user-space hwdb to
fix that.
On the contrary, it's rather easy in user-space to have a hwdb
with the problematic platforms. Then, libinput (1.7.0+) can fix
the state of the lid switch for us: you need to set the udev
property LIBINPUT_ATTR_LID_SWITCH_RELIABILITY to 'write_open'.
When libinput detects internal keyboard events, it will overwrite the
state of the switch to open, making it reliable again. Given that
logind only checks the lid switch value after a timeout, we can
assume the user will use the internal keyboard before this timeout
expires.
For example, such a hwdb entry is:
libinput:name:*Lid Switch*:dmi:*svnMicrosoftCorporation:pnSurface3:*
LIBINPUT_ATTR_LID_SWITCH_RELIABILITY=write_open
Link: https://bugzilla.gnome.org/show_bug.cgi?id=782380
Cc: 4.11+ <stable@vger.kernel.org> # 4.11+
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Here is an overdue pull request for pin control fixes, the most
prominent feature is to make Intel Chromebooks (and I suspect any
other Cherryview-based Intel thing) happy again, which we really want
to see.
There is a patch hitting drivers/firmware/* that I was uncertain to
who actually manages, but I got Andy Shevchenko's and Dmitry Torokov's
review tags on it and I trust them both 100% to do the right thing for
Intel platform drivers.
Summary:
- Make a few Intel Chromebooks with Cherryview DMI firmware work
smoothly.
- A fix for some bogus allocations in the generic group management
code.
- Some GPIO descriptor lookup table stubs. Merged through the pin
control tree for administrative reasons.
- Revert the "bi-directional" and "output-enable" generic properties:
we need more discussions around this. It seems other SoCs are using
input/output gate enablement and these terms are not correct.
- Fix mux and drive strength atomically in the MXS driver.
- Fix the SPDIF function on sunxi A83T.
- OF table terminators and other small fixes"
* tag 'pinctrl-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: sunxi: Fix SPDIF function name for A83T
pinctrl: mxs: atomically switch mux and drive strength config
pinctrl: cherryview: Extend the Chromebook DMI quirk to Intel_Strago systems
firmware: dmi: Add DMI_PRODUCT_FAMILY identification string
pinctrl: core: Fix warning by removing bogus code
gpiolib: Add stubs for gpiod lookup table interface
Revert "pinctrl: generic: Add bi-directional and output-enable"
pinctrl: cherryview: Add terminate entry for dmi_system_id tables
|
|
This fixes a regression in commit 4d6501dce079 where I didn't notice
that MIPS and OpenRISC were reinitialising p->{set,clear}_child_tid to
NULL after our initialisation in copy_process().
We can simply get rid of the arch-specific initialisation here since it
is now always done in copy_process() before hitting copy_thread{,_tls}().
Review notes:
- As far as I can tell, copy_process() is the only user of
copy_thread_tls(), which is the only caller of copy_thread() for
architectures that don't implement copy_thread_tls().
- After this patch, there is no arch-specific code touching
p->set_child_tid or p->clear_child_tid whatsoever.
- It may look like MIPS/OpenRISC wanted to always have these fields be
NULL, but that's not true, as copy_process() would unconditionally
set them again _after_ calling copy_thread_tls() before commit
4d6501dce079.
Fixes: 4d6501dce079c1eb6bf0b1d8f528a5e81770109e ("kthread: Fix use-after-free if kthread fork fails")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net> # MIPS only
Acked-by: Stafford Horne <shorne@gmail.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: openrisc@lists.librecores.org
Cc: Jamie Iles <jamie.iles@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Filesystems filter out extended attributes in the "trusted." domain for
unprivlieged callers.
Overlay calls underlying filesystem's method with elevated privs, so need
to do the filtering in overlayfs too.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
For ACPI devices which do not have a _PSC method, the ACPI subsys cannot
query their initial state at boot, so these devices are assumed to have
been put in D0 by the BIOS, but for touchscreens that is not always true.
This commit adds a call to acpi_device_fix_up_power to explicitly put
devices without a _PSC method into D0 state (for devices with a _PSC
method it is a nop). Note we only need to do this on probe, after a
resume the ACPI subsys knows the device is in D3 and will properly
put it in D0.
This fixes the SIS0817 i2c-hid touchscreen on a Peaq C1010 2-in-1
device failing to probe with a "hid_descr_cmd failed" error.
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The Analogix 7737 DP to HDMI converter requires reduced M and N values
when to operate correctly at HBR2. We tried to reduce the M/N values for
all devices in commit 9a86cda07af2 ("drm/i915/dp: reduce link M/N
parameters"), but that regressed some other sinks. Detect this IC by its
OUI value of 0x0022B9 via the DPCD quirk list, and only reduce the M/N
values for that.
v2 by Jani: Rebased on the DP quirk database
v3 by Jani: Rebased on the reworked DP quirk database
v4 by Jani: Improve commit message (Daniel)
Fixes: 9a86cda07af2 ("drm/i915/dp: reduce link M/N parameters")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93578
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100755
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/2d2e30f8f47d3f28c9b74ca2612336a54585c3ec.1495105635.git.jani.nikula@intel.com
|
|
Face the fact, there are Display Port sink and branch devices out there
in the wild that don't follow the Display Port specifications, or they
have bugs, or just otherwise require special treatment. Start a common
quirk database the drivers can query based on the DP device
identification. At least for now, we leave the workarounds for the
drivers to implement as they see fit.
For starters, add a branch device that can't handle full 24-bit main
link Mdiv and Ndiv main link attributes properly. Naturally, the
workaround of reducing main link attributes for all devices ended up in
regressions for other devices. So here we are.
v2: Rebase on DRM DP desc read helpers
v3: Fix the OUI memcmp blunder (Clint)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Adam Jackson <ajax@redhat.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Tested-by: Clinton Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Clinton Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> # v2
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/91ec198dd95258dbf3bee2f6be739e0da73b4fdd.1495105635.git.jani.nikula@intel.com
|
|
Switch to using the common DP helpers instead of using our own.
v2: also remove leftover struct intel_dp_desc (Daniel)
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/acba54da7d80eafea9e59a893e27e3c31028c0ba.1495105635.git.jani.nikula@intel.com
|
|
An upper dir is marked "impure" to let ovl_iterate() know that this
directory may contain non pure upper entries whose d_ino may need to be
read from the origin inode.
We already mark a non-merge dir "impure" when moving a non-pure child
entry inside it, to let ovl_iterate() know not to iterate the non-merge
dir directly.
Mark also a merge dir "impure" when moving a non-pure child entry inside
it and when copying up a child entry inside it.
This can be used to optimize ovl_iterate() to perform a "pure merge" of
upper and lower directories, merging the content of the directories,
without having to read d_ino from origin inodes.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Commit 93c1defedcae ("rbd: remove the discard_zeroes_data flag")
explicitly didn't implement REQ_OP_WRITE_ZEROES for rbd, while the
following commit 48920ff2a5a9 ("block: remove the discard_zeroes_data
flag") dropped ->discard_zeroes_data in favor of REQ_OP_WRITE_ZEROES.
rbd does support efficient zeroing via CEPH_OSD_OP_ZERO opcode and will
release either some or all blocks depending on whether the zeroing
request is rbd_obj_bytes() aligned. This is how we currently implement
discards, so REQ_OP_WRITE_ZEROES can be identical to REQ_OP_DISCARD for
now. Caveats:
- REQ_NOUNMAP is ignored, but AFAICT that's true of at least two other
current implementations - nvme and loop
- there is no ->write_zeroes_alignment and blk_bio_write_zeroes_split()
is hence less helpful than blk_bio_discard_split(), but this can (and
should) be fixed on the rbd side
In the future we will split these into two code paths to respect
REQ_NOUNMAP on zeroout and save on zeroing blocks that couldn't be
released on discard.
Fixes: 93c1defedcae ("rbd: remove the discard_zeroes_data flag")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
DEBUG_PREEMPT warning
... to raw_smp_processor_id() to not trip the
BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1
check. The reasoning behind it is that __warn() already uses the raw_
variants but the show_regs() path on 32-bit doesn't.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170528092212.fiod7kygpjm23m3o@pd.tnic
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
preemptibility bug
With CONFIG_DEBUG_PREEMPT enabled, I get:
BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1
caller is debug_smp_processor_id
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.12.0-rc2+ #2
Call Trace:
dump_stack
check_preemption_disabled
debug_smp_processor_id
save_microcode_in_initrd_amd
? microcode_init
save_microcode_in_initrd
...
because, well, it says it above, we're using smp_processor_id() in
preemptible code.
But passing the CPU number is not really needed. It is only used to
determine whether we're on the BSP, and, if so, to save the microcode
patch for early loading.
[ We don't absolutely need to do it on the BSP but we do that
customarily there. ]
Instead, convert that function parameter to a boolean which denotes
whether the patch should be saved or not, thereby avoiding the use of
smp_processor_id() in preemptible code.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170528200414.31305-1-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This patch removes unnecessary descriptions on
exynos_drm_crtc structure and adds one description
which specifies what pipe_clk member does.
pipe_clk support had been added by below patch without any description,
drm/exynos: add support for pipeline clock to the framework
Commit-id : f26b9343f582f44ec920474d71b4b2220b1ed9a8
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Since bridge node is referenced during in the probe, it should be
released on removal.
Suggested-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
The dsi + panel is a parental relationship, so OF grpah is not needed.
Therefore, the current dsi_parse_dt function will throw an error,
because there is no linked OF graph for the case fimd + dsi + panel.
Parse the Pll burst and esc clock frequency properties in dsi_parse_dt()
and create a bridge_node only if there is an OF graph associated with dsi.
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Again no apparent explanation for the split except hysterical raisins.
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal
Pull thermal SoC management fixes from Eduardo Valentin:
- fixes to TI SoC driver, Broadcom, qoriq
- small sparse warning fix on thermal core
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
thermal: broadcom: ns-thermal: default on iProc SoCs
ti-soc-thermal: Fix a typo in a comment line
ti-soc-thermal: Delete error messages for failed memory allocations in ti_bandgap_build()
ti-soc-thermal: Use devm_kcalloc() in ti_bandgap_build()
thermal: core: make thermal_emergency_poweroff static
thermal: qoriq: remove useless call for of_thermal_get_trip_points()
|
|
The randstruct plugin requires designated initializers for structures
that are entirely function pointers.
Cc: Wu-Cheng Li <wuchengli@chromium.org>
Cc: Tiffany Lin <tiffany.lin@mediatek.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
The randstruct plugin requires designated initializers for structures
that are entirely function pointers.
Cc: Christian König <christian.koenig@amd.com>
Cc: Eric Huang <JinHuiEric.Huang@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
The randstruct plugin requires structures that are entirely function
pointers be initialized using designated initializers.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Prepare to mark sensitive kernel structures for randomization by making
sure they're using designated initializers. In this case, no initializers
are needed (they can be NULL initialized and callers adjusted to check
for NULL, which is more efficient than an indirect call).
Cc: Robin Holt <robinmholt@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
|
|
When trying to propagate an error result, the error return path attempts
to retain the error, but does this with an open cast across very different
types, which the upcoming structure layout randomization plugin flags as
being potentially dangerous in the face of randomization. This is a false
positive, but what this code actually wants to do is use ERR_CAST() to
retain the error value.
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
When trying to propagate an error result, the error return path attempts
to retain the error, but does this with an open cast across very different
types, which the upcoming structure layout randomization plugin flags as
being potentially dangerous in the face of randomization. This is a false
positive, but what this code actually wants to do is use ERR_CAST() to
retain the error value.
Cc: Anton Altaparmakov <anton@tuxera.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
When the call to nfs_devname() fails, the error path attempts to retain
the error via the mnt variable, but this requires a cast across very
different types (char * to struct vfsmount *), which the upcoming
structure layout randomization plugin flags as being potentially
dangerous in the face of randomization. This is a false positive, but
what this code actually wants to do is retain the error value, so this
patch explicitly sets it, instead of using what seems to be an
unexpected cast.
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Sabrina Dubroca reported an early panic:
BUG: unable to handle kernel paging request at ffffffffff240001
IP: efi_bgrt_init+0xdc/0x134
[...]
---[ end Kernel panic - not syncing: Attempted to kill the idle task!
... which was introduced by:
7b0a911478c7 ("efi/x86: Move the EFI BGRT init code to early init code")
The cause is that on this machine the firmware provides the EFI ACPI BGRT
table even on legacy non-EFI bootups - which table should be EFI only.
The garbage BGRT data causes the efi_bgrt_init() panic.
Add a check to skip efi_bgrt_init() in case non-EFI bootup to work around
this firmware bug.
Tested-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: <stable@vger.kernel.org> # v4.11+
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 7b0a911478c7 ("efi/x86: Move the EFI BGRT init code to early init code")
Link: http://lkml.kernel.org/r/20170526113652.21339-6-matt@codeblueprint.co.uk
[ Rewrote the changelog to be more readable. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
