summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-06-01rtc: rzn1: Disable controller before initializationWolfram Sang
Datasheet says that the controller must be disabled before setting up either SUBU or SCMP. This did not matter so far because the driver only supported SUBU which was the default, too. It is good practice to follow datasheet recommendations, though. It will also be needed because SCMP mode will be added in a later patch. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20250526095801.35781-7-wsa+renesas@sang-engineering.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-06-01dt-bindings: rtc: rzn1: add optional second clockWolfram Sang
The external crystal can be a second clock input. It is needed for the SCMP counting method which allows using crystals different than 32768Hz. It is also needed for an upcoming SoC which only supports the SCMP method. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20250526095801.35781-6-wsa+renesas@sang-engineering.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-05-26rtc: m41t80: reduce verbosityAlexandre Belloni
The driver currently uses dev_err for messages that have a very low probability of being read by the user as the error will probably never happen and the systems with the RTC probably don't have any user able to read the message. Moreover, the only user action after getting this message is the restart the action so drop the level to dev_dbg. Link: https://lore.kernel.org/r/20250525222153.1472917-1-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-05-25rtc: m41t80: kickstart ocillator upon failureA. Niyas Ahamed Mydeen
The ocillator on the m41t62 (and other chips of this type) needs a kickstart upon a failure; the RTC read routine will notice the oscillator failure and fail reads. This is added in the RTC write routine; this allows the system to know that the time in the RTC is accurate. This is following the procedure described in section 3.11 of "https://www.st.com/resource/en/datasheet/m41t62.pdf" Signed-off-by: A. Niyas Ahamed Mydeen <nmydeen@mvista.com> Reviewed-by: Corey Minyard <cminyard@mvista.com> Link: https://lore.kernel.org/r/20250402120546.336657-2-nmydeen@mvista.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-05-25rtc: s32g: add NXP S32G2/S32G3 SoC supportCiprian Marian Costea
Add a RTC driver for NXP S32G2/S32G3 SoCs. RTC tracks clock time during system suspend. It can be a wakeup source for the S32G2/S32G3 SoC based boards. The RTC module from S32G2/S32G3 is not battery-powered and it is not kept alive during system reset. Co-developed-by: Bogdan Hamciuc <bogdan.hamciuc@nxp.com> Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@nxp.com> Co-developed-by: Ghennadi Procopciuc <Ghennadi.Procopciuc@nxp.com> Signed-off-by: Ghennadi Procopciuc <Ghennadi.Procopciuc@nxp.com> Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Tested-by: Enric Balletbo i Serra <eballetbo@kernel.org> Link: https://lore.kernel.org/r/20250403103346.3064895-3-ciprianmarian.costea@oss.nxp.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-05-25dt-bindings: rtc: add schema for NXP S32G2/S32G3 SoCsCiprian Marian Costea
RTC tracks clock time during system suspend and it is used as a wakeup source on S32G2/S32G3 architecture. RTC from S32G2/S32G3 is not battery-powered and it is not kept alive during system reset. Co-developed-by: Bogdan-Gabriel Roman <bogdan-gabriel.roman@nxp.com> Signed-off-by: Bogdan-Gabriel Roman <bogdan-gabriel.roman@nxp.com> Co-developed-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com> Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com> Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20250403103346.3064895-2-ciprianmarian.costea@oss.nxp.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-05-25dt-bindings: at91rm9260-rtt: add microchip,sama7d65-rttRyan Wanner
Add SAMA7D65 RTT compatible to DT bindings documentation. Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/183474a65377f4030360166a5f2659af7323e82b.1744666011.git.Ryan.Wanner@microchip.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-05-25dt-bindings: rtc: at91rm9200: add microchip,sama7d65-rtcRyan Wanner
Add SAMA7D65 RTC compatible to DT bindings documentation. Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/a274485331628be0bcf382b1ba489d4555fa49c8.1744666011.git.Ryan.Wanner@microchip.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-05-25rtc: loongson: Add missing alarm notifications for ACPI RTC eventsLiu Dalin
When an application sets and enables an alarm on Loongson RTC devices, the alarm notification fails to propagate to userspace because the ACPI event handler omits calling rtc_update_irq(). As a result, processes waiting via select() or poll() on RTC device files fail to receive alarm notifications. The ACPI interrupt is also triggered multiple times. In loongson_rtc_handler, we need to clear TOY_MATCH0_REG to resolve this issue. Fixes: 09471d8f5b39 ("rtc: loongson: clear TOY_MATCH0_REG in loongson_rtc_isr()") Fixes: 1b733a9ebc3d ("rtc: Add rtc driver for the Loongson family chips") Signed-off-by: Liu Dalin <liudalin@kylinsec.com.cn> Reviewed-by: Binbin Zhou <zhoubinbin@loongson.cn> Link: https://lore.kernel.org/r/20250509084416.7979-1-liudalin@kylinsec.com.cn Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-05-25rtc: sophgo: add rtc support for Sophgo CV1800 SoCJingbao Qiu
Implement the RTC driver for CV1800, which able to provide time alarm. Signed-off-by: Jingbao Qiu <qiujingbao.dlmu@gmail.com> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Link: https://lore.kernel.org/r/20250507195626.502240-1-alexander.sverdlin@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-05-24rtc: stm32: drop unused module aliasJohan Hovold
The driver only support OF probe so drop the unused platform module alias. Fixes: 4e64350f42e2 ("rtc: add STM32 RTC driver") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250423130318.31244-8-johan+linaro@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-05-24rtc: s3c: drop unused module aliasJohan Hovold
The driver only support OF probe so drop the unused platform module alias. Fixes: ae05c95074e0 ("rtc: s3c: add s3c_rtc_data structure to use variant data instead of s3c_cpu_type") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Fixes: 0d297df03890 ("ARM: s3c: simplify platform code") Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250423130318.31244-7-johan+linaro@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-05-24rtc: pm8xxx: drop unused module aliasJohan Hovold
The driver only support OF probe so drop the unused platform module alias. Fixes: 5a418558cdae ("rtc: pm8xxx: add support for devicetree") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250423130318.31244-6-johan+linaro@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-05-24rtc: jz4740: drop unused module aliasJohan Hovold
The driver only support OF probe so drop the unused platform module alias. Fixes: 24e1f2c9383e ("rtc: ingenic: Only support probing from devicetree") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Acked-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20250423130318.31244-5-johan+linaro@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-05-24rtc: da9063: drop unused module aliasJohan Hovold
The driver only support OF probe so drop the unused platform module alias. Fixes: 80ca3277bc7f ("rtc: da9063: Add DA9062 RTC capability to DA9063 RTC driver") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250423130318.31244-4-johan+linaro@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-05-24rtc: cpcap: drop unused module aliasJohan Hovold
The driver only supports OF probe so drop the unused platform module alias. Fixes: dd3bf50b35e3 ("rtc: cpcap: new rtc driver") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20250423130318.31244-3-johan+linaro@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-05-24rtc: at91rm9200: drop unused module aliasJohan Hovold
The driver only support OF probe so drop the unused platform module alias. Fixes: 288d9cf1764a ("rtc: at91rm9200: use of_device_get_match_data()") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250423130318.31244-2-johan+linaro@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-05-24rtc: pm8xxx: fix uefi offset lookupJohan Hovold
On many Qualcomm platforms the PMIC RTC control and time registers are read-only so that the RTC time can not be updated. Instead an offset needs be stored in some machine-specific non-volatile memory, which a driver can take into account. On platforms where the offset is stored in a Qualcomm specific UEFI variable the variables are also accessed in a non-standard way, which means that the OS cannot assume that the variable service is available by the time the driver probes. Use the new 'qcom,uefi-rtc-info' property to determine whether to probe defer until the UEFI offset becomes available so that the offset can be used also when the RTC driver is built in or when a dependency of the UEFI variable driver is built as a module (e.g. the driver for the SCM interconnects). Fixes: bba38b874886 ("rtc: pm8xxx: add support for uefi offset") Reported-by: Rob Clark <robdclark@gmail.com> Link: https://lore.kernel.org/lkml/CAF6AEGsfke=x0p1b2-uNX6DuQfRyEjVbJaxTbVLDT2YvSkGJbg@mail.gmail.com/ Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20250423075143.11157-3-johan+linaro@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-05-24dt-bindings: rtc: qcom-pm8xxx: add uefi-variable offsetJohan Hovold
On many Qualcomm platforms the PMIC RTC control and time registers are read-only so that the RTC time can not be updated. Instead an offset needs be stored in some machine-specific non-volatile memory, which a driver can take into account. On platforms where the offset is stored in a Qualcomm specific UEFI variable the variables are also accessed in a non-standard way, which means that the OS cannot assume that the variable service is available by the time the RTC driver probes. Add a 'qcom,uefi-rtc-info' boolean flag to indicate that the RTC offset is stored in a Qualcomm specific UEFI variable so that the OS can determine whether to wait for it to become available. The UEFI variable is 882f8c2b-9646-435f-8de5-f208ff80c1bd-RTCInfo and holds a 12-byte structure where the first four bytes is a GPS time offset in little-endian byte order. Link: https://lore.kernel.org/all/aAecIkgmTTlThKEZ@hovoldconsulting.com/ Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20250423075143.11157-2-johan+linaro@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-05-24rtc: amlogic: Do not enable by default during compile testingKrzysztof Kozlowski
Enabling the compile test should not cause automatic enabling of all drivers, but only allow to choose to compile them. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250417074640.81363-1-krzysztof.kozlowski@linaro.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-05-24rtc: interface: silence KMSAN warningAlexandre Belloni
KMSAN complains that alarm->time can be used uninitialized. Pass 0 to trace_rtc_read_alarm in case it has not been set. Link: https://lore.kernel.org/r/20250408144203.3869821-1-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-04-08rtc: da9063: simplify irq managementWolfram Sang
The code for enabling and disabling the irq is so similar that it can easily be handled by one function. Like in most other RTC drivers. Save the duplicated code and one layer of indirection. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20250320102218.10781-2-wsa+renesas@sang-engineering.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-04-08rtc: rzn1: clear interrupts on removeWolfram Sang
It is good practice to clear running interrupts before removing the driver. This is not really a bugfix because on current systems RuntimePM will disable the module clock, so interrupts won't be initiated. The dependency on that behaviour is subtle, though. Better be self-contained and clean up when removing. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20250312100105.36767-2-wsa+renesas@sang-engineering.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-04-08rtc: sh: minor fixes to adhere to coding styleWolfram Sang
Use the BIT macro, use curly braces for else-blocks, don't split strings over multiple lines, annotate the lock, update copyright. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20250227134256.9167-18-wsa+renesas@sang-engineering.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-04-08rtc: sh: use local variables in probe() for mapping IOWolfram Sang
No need to store the resource for the registers in the per-device struct because we only need it during probe. Remove some unneeded unlikely() while here and correct the type of 'regsize'. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20250227134256.9167-17-wsa+renesas@sang-engineering.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-04-08rtc: sh: remove useless wrapper functionWolfram Sang
The wrapper to enable interrupts is so thin that we can use it directly. Also gets rid of an 'inline' which doesn't make sense here. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20250227134256.9167-16-wsa+renesas@sang-engineering.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-04-08rtc: sh: simplify irq setup after refactoringWolfram Sang
We only need the alarm_irq handler. That means we can remove everything related to periodic_irq and carry_irq. Also, the shared handler can go since we only we need the alarm interrupt in any case. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20250227134256.9167-15-wsa+renesas@sang-engineering.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-04-08rtc: sh: remove periodic interrupt handlingWolfram Sang
Because periodic interrupts are emulated by the RTC core, the PIE handling code can simply go away now. And with it the custom proc-file. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20250227134256.9167-14-wsa+renesas@sang-engineering.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-04-08rtc: sh: only disable carry interrupts in probe()Wolfram Sang
With old, custom UIE handling removed, we can now disable the carry interrupt in probe() and leave it like this. No further handling is required. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20250227134256.9167-13-wsa+renesas@sang-engineering.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-04-08rtc: sh: remove update interrupt handlingWolfram Sang
Since commit e428c6a2772b ("RTC: Clean out UIE icotl implementations"), the flag for UIE cannot be set anymore. Because UIE is now handled via regular alarms and a timerqueue by the RTC core, the UIE handling code can simply go away now. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20250227134256.9167-12-wsa+renesas@sang-engineering.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-04-08rtc: sh: assign correct interrupts with DTWolfram Sang
The DT bindings for this driver define the interrupts in the order as they are numbered in the interrupt controller. The old platform_data, however, listed them in a different order. So, for DT based platforms, they are mixed up. Assign them specifically for DT, so we can keep the bindings stable. After the fix, 'rtctest' passes again on the Renesas Genmai board (RZ-A1 / R7S72100). Fixes: dab5aec64bf5 ("rtc: sh: add support for rza series") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20250227134256.9167-11-wsa+renesas@sang-engineering.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-04-06Linux 6.15-rc1v6.15-rc1Linus Torvalds
2025-04-06tools/include: make uapi/linux/types.h usable from assemblyThomas Weißschuh
The "real" linux/types.h UAPI header gracefully degrades to a NOOP when included from assembly code. Mirror this behaviour in the tools/ variant. Test for __ASSEMBLER__ over __ASSEMBLY__ as the former is provided by the toolchain automatically. Reported-by: Mark Brown <broonie@kernel.org> Closes: https://lore.kernel.org/lkml/af553c62-ca2f-4956-932c-dd6e3a126f58@sirena.org.uk/ Fixes: c9fbaa879508 ("selftests: vDSO: parse_vdso: Use UAPI headers instead of libc headers") Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Link: https://patch.msgid.link/20250321-uapi-consistency-v1-1-439070118dc0@linutronix.de Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2025-04-06Merge tag 'turbostat-2025.05.06' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull turbostat updates from Len Brown: - support up to 8192 processors - add cpuidle governor debug telemetry, disabled by default - update default output to exclude cpuidle invocation counts - bug fixes * tag 'turbostat-2025.05.06' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: v2025.05.06 tools/power turbostat: disable "cpuidle" invocation counters, by default tools/power turbostat: re-factor sysfs code tools/power turbostat: Restore GFX sysfs fflush() call tools/power turbostat: Document GNR UncMHz domain convention tools/power turbostat: report CoreThr per measurement interval tools/power turbostat: Increase CPU_SUBSET_MAXCPUS to 8192 tools/power turbostat: Add idle governor statistics reporting tools/power turbostat: Fix names matching tools/power turbostat: Allow Zero return value for some RAPL registers tools/power turbostat: Clustered Uncore MHz counters should honor show/hide options
2025-04-06Merge tag 'soundwire-6.15-rc1-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire Pull soundwire fix from Vinod Koul: - add missing config symbol CONFIG_SND_HDA_EXT_CORE required for asoc driver CONFIG_SND_SOF_SOF_HDA_SDW_BPT * tag 'soundwire-6.15-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: ASoC: SOF: Intel: Let SND_SOF_SOF_HDA_SDW_BPT select SND_HDA_EXT_CORE
2025-04-06tools/power turbostat: v2025.05.06Len Brown
Support up to 8192 processors Add cpuidle governor debug telemetry, disabled by default Update default output to exclude cpuidle invocation counts Bug fixes Signed-off-by: Len Brown <len.brown@intel.com>
2025-04-06tools/power turbostat: disable "cpuidle" invocation counters, by defaultLen Brown
Create "pct_idle" counter group, the sofware notion of residency so it can now be singled out, independent of other counter groups. Create "cpuidle" group, the cpuidle invocation counts. Disable "cpuidle", by default. Create "swidle" = "cpuidle" + "pct_idle". Undocument "sysfs", the old name for "swidle", but keep it working for backwards compatibilty. Create "hwidle", all the HW idle counters Modify "idle", enabled by default "idle" = "hwidle" + "pct_idle" (and now excludes "cpuidle") Signed-off-by: Len Brown <len.brown@intel.com>
2025-04-06Merge tag 'perf-urgent-2025-04-06' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf event fix from Ingo Molnar: "Fix a perf events time accounting bug" * tag 'perf-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Fix child_total_time_enabled accounting bug at task exit
2025-04-06Merge tag 'sched-urgent-2025-04-06' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: - Fix a nonsensical Kconfig combination - Remove an unnecessary rseq-notification * tag 'sched-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rseq: Eliminate useless task_work on execve sched/isolation: Make CONFIG_CPU_ISOLATION depend on CONFIG_SMP
2025-04-06Disable SLUB_TINY for build testingLinus Torvalds
... and don't error out so hard on missing module descriptions. Before commit 6c6c1fc09de3 ("modpost: require a MODULE_DESCRIPTION()") we used to warn about missing module descriptions, but only when building with extra warnigns (ie 'W=1'). After that commit the warning became an unconditional hard error. And it turns out not all modules have been converted despite the claims to the contrary. As reported by Damian Tometzki, the slub KUnit test didn't have a module description, and apparently nobody ever really noticed. The reason nobody noticed seems to be that the slub KUnit tests get disabled by SLUB_TINY, which also ends up disabling a lot of other code, both in tests and in slub itself. And so anybody doing full build tests didn't actually see this failre. So let's disable SLUB_TINY for build-only tests, since it clearly ends up limiting build coverage. Also turn the missing module descriptions error back into a warning, but let's keep it around for non-'W=1' builds. Reported-by: Damian Tometzki <damian@riscv-rocks.de> Link: https://lore.kernel.org/all/01070196099fd059-e8463438-7b1b-4ec8-816d-173874be9966-000000@eu-central-1.amazonses.com/ Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Fixes: 6c6c1fc09de3 ("modpost: require a MODULE_DESCRIPTION()") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2025-04-06tools/power turbostat: re-factor sysfs codeLen Brown
Probe cpuidle "sysfs" residency and counts separately, since soon we will make one disabled on, and the other disabled off. Clarify that some BIC (build-in-counters) are actually "groups". since we're about to re-name some of those groups. no functional change. Signed-off-by: Len Brown <len.brown@intel.com>
2025-04-06tools/power turbostat: Restore GFX sysfs fflush() callZhang Rui
Do fflush() to discard the buffered data, before each read of the graphics sysfs knobs. Fixes: ba99a4fc8c24 ("tools/power turbostat: Remove unnecessary fflush() call") Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-04-06tools/power turbostat: Document GNR UncMHz domain conventionLen Brown
Document that on Intel Granite Rapids Systems, Uncore domains 0-2 are CPU domains, and uncore domains 3-4 are IO domains. Signed-off-by: Len Brown <len.brown@intel.com>
2025-04-06tools/power turbostat: report CoreThr per measurement intervalLen Brown
The CoreThr column displays total thermal throttling events since boot time. Change it to report events during the measurement interval. This is more useful for showing a user the current conditions. Total events since boot time are still available to the user via /sys/devices/system/cpu/cpu*/thermal_throttle/* Document CoreThr on turbostat.8 Fixes: eae97e053fe30 ("turbostat: Support thermal throttle count print") Reported-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Cc: Chen Yu <yu.c.chen@intel.com>
2025-04-06tools/power turbostat: Increase CPU_SUBSET_MAXCPUS to 8192Justin Ernst
On systems with >= 1024 cpus (in my case 1152), turbostat fails with the error output: "turbostat: /sys/fs/cgroup/cpuset.cpus.effective: cpu str malformat 0-1151" A similar error appears with the use of turbostat --cpu when the inputted cpu range contains a cpu number >= 1024: # turbostat -c 1100-1151 "--cpu 1100-1151" malformed ... Both errors are caused by parse_cpu_str() reaching its limit of CPU_SUBSET_MAXCPUS. It's a good idea to limit the maximum cpu number being parsed, but 1024 is too low. For a small increase in compute and allocated memory, increasing CPU_SUBSET_MAXCPUS brings support for parsing cpu numbers >= 1024. Increase CPU_SUBSET_MAXCPUS to 8192, a common setting for CONFIG_NR_CPUS on x86_64. Signed-off-by: Justin Ernst <justin.ernst@hpe.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-04-06Merge tag 'timers-cleanups-2025-04-06' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer cleanups from Thomas Gleixner: "A set of final cleanups for the timer subsystem: - Convert all del_timer[_sync]() instances over to the new timer_delete[_sync]() API and remove the legacy wrappers. Conversion was done with coccinelle plus some manual fixups as coccinelle chokes on scoped_guard(). - The final cleanup of the hrtimer_init() to hrtimer_setup() conversion. This has been delayed to the end of the merge window, so that all patches which have been merged through other trees are in mainline and all new users are catched. Doing this right before rc1 ensures that new code which is merged post rc1 is not introducing new instances of the original functionality" * tag 'timers-cleanups-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tracing/timers: Rename the hrtimer_init event to hrtimer_setup hrtimers: Rename debug_init_on_stack() to debug_setup_on_stack() hrtimers: Rename debug_init() to debug_setup() hrtimers: Rename __hrtimer_init_sleeper() to __hrtimer_setup_sleeper() hrtimers: Remove unnecessary NULL check in hrtimer_start_range_ns() hrtimers: Make callback function pointer private hrtimers: Merge __hrtimer_init() into __hrtimer_setup() hrtimers: Switch to use __htimer_setup() hrtimers: Delete hrtimer_init() treewide: Convert new and leftover hrtimer_init() users treewide: Switch/rename to timer_delete[_sync]()
2025-04-06Merge tag 'irq-urgent-2025-04-06' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull more irq updates from Thomas Gleixner: "A set of updates for the interrupt subsystem: - A treewide cleanup for the irq_domain code, which makes the naming consistent and gets rid of the original oddity of naming domains 'host'. This is a trivial mechanical change and is done late to ensure that all instances have been catched and new code merged post rc1 wont reintroduce new instances. - A trivial consistency fix in the migration code The recent introduction of irq_force_complete_move() in the core code, causes a problem for the nostalgia crowd who maintains ia64 out of tree. The code assumes that hierarchical interrupt domains are enabled and dereferences irq_data::parent_data unconditionally. That works in mainline because both architectures which enable that code have hierarchical domains enabled. Though it breaks the ia64 build, which enables the functionality, but does not have hierarchical domains. While it's not really a problem for mainline today, this unconditional dereference is inconsistent and trivially fixable by using the existing helper function irqd_get_parent_data(), which has the appropriate #ifdeffery in place" * tag 'irq-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/migration: Use irqd_get_parent_data() in irq_force_complete_move() irqdomain: Stop using 'host' for domain irqdomain: Rename irq_get_default_host() to irq_get_default_domain() irqdomain: Rename irq_set_default_host() to irq_set_default_domain()
2025-04-06Merge tag 'timers-urgent-2025-04-06' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner: "A revert to fix a adjtimex() regression: The recent change to prevent that time goes backwards for the coarse time getters due to immediate multiplier adjustments via adjtimex(), changed the way how the timekeeping core treats that. That change result in a regression on the adjtimex() side, which is user space visible: 1) The forwarding of the base time moves the update out of the original period and establishes a new one. That's changing the behaviour of the [PF]LL control, which user space expects to be applied periodically. 2) The clearing of the accumulated NTP error due to #1, changes the behaviour as well. An attempt to delay the multiplier/frequency update to the next tick did not solve the problem as userspace expects that the multiplier or frequency updates are in effect, when the syscall returns. There is a different solution for the coarse time problem available, so revert the offending commit to restore the existing adjtimex() behaviour" * tag 'timers-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "timekeeping: Fix possible inconsistencies in _COARSE clockids"
2025-04-06Merge tag 'sh-for-v6.15-tag1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux Pull sh updates from John Paul Adrian Glaubitz: "One important fix and one small configuration update. The first patch by Artur Rojek fixes an issue with the J2 firmware loader not being able to find the location of the device tree blob due to insufficient alignment of the .bss section which rendered J2 boards unbootable. The second patch by Johan Korsnes updates the defconfigs on sh to drop the CONFIG_NET_CLS_TCINDEX configuration option which became obsolete after 8c710f75256b ("net/sched: Retire tcindex classifier"). Summary: - sh: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX - sh: Align .bss section padding to 8-byte boundary" * tag 'sh-for-v6.15-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux: sh: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX sh: Align .bss section padding to 8-byte boundary
2025-04-05Merge tag 'kbuild-v6.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Improve performance in gendwarfksyms - Remove deprecated EXTRA_*FLAGS and KBUILD_ENABLE_EXTRA_GCC_CHECKS - Support CONFIG_HEADERS_INSTALL for ARCH=um - Use more relative paths to sources files for better reproducibility - Support the loong64 Debian architecture - Add Kbuild bash completion - Introduce intermediate vmlinux.unstripped for architectures that need static relocations to be stripped from the final vmlinux - Fix versioning in Debian packages for -rc releases - Treat missing MODULE_DESCRIPTION() as an error - Convert Nios2 Makefiles to use the generic rule for built-in DTB - Add debuginfo support to the RPM package * tag 'kbuild-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (40 commits) kbuild: rpm-pkg: build a debuginfo RPM kconfig: merge_config: use an empty file as initfile nios2: migrate to the generic rule for built-in DTB rust: kbuild: skip `--remap-path-prefix` for `rustdoc` kbuild: pacman-pkg: hardcode module installation path kbuild: deb-pkg: don't set KBUILD_BUILD_VERSION unconditionally modpost: require a MODULE_DESCRIPTION() kbuild: make all file references relative to source root x86: drop unnecessary prefix map configuration kbuild: deb-pkg: add comment about future removal of KDEB_COMPRESS kbuild: Add a help message for "headers" kbuild: deb-pkg: remove "version" variable in mkdebian kbuild: deb-pkg: fix versioning for -rc releases Documentation/kbuild: Fix indentation in modules.rst example x86: Get rid of Makefile.postlink kbuild: Create intermediate vmlinux build with relocations preserved kbuild: Introduce Kconfig symbol for linking vmlinux with relocations kbuild: link-vmlinux.sh: Make output file name configurable kbuild: do not generate .tmp_vmlinux*.map when CONFIG_VMLINUX_MAP=y Revert "kheaders: Ignore silly-rename files" ...
generated by cgit (git 2.34.1) at 2025-09-12 09:08:00 +0000