summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-02-15powerpc/mm/radix: Use ptep_get_and_clear_full when clearing pte for full mmAneesh Kumar K.V
This helps us to do some optimization for application exit case, where we can skip the DD1 style pte update sequence. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Tested-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-15powerpc/mm/radix: Update pte update sequence for pte clear caseAneesh Kumar K.V
In the kernel we do follow the below sequence in different code paths. pte = ptep_get_clear(ptep) .... set_pte_at(ptep, pte) We do that for mremap, autonuma protection update and softdirty clearing. This implies our optimization to skip a tlb flush when clearing a pte update is not valid, because for DD1 system that followup set_pte_at will be done witout doing the required tlbflush. Fix that by always doing the dd1 style pte update irrespective of new_pte value. In a later patch we will optimize the application exit case. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Tested-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-15powerpc/mm: Update PROTFAULT handling in the page fault pathAneesh Kumar K.V
With radix, we can get page fault with DSISR_PROTFAULT value set in case of PROT_NONE or autonuma mapping. The PROT_NONE case in handled by the vma check where we consider the access bad. For autonuma we should fall through and fixup the access mask correctly. Without this patch we trigger the WARN_ON() on radix. This code moves that WARN_ON() within a radix_enabled() check. I also moved the WARN_ON() outside the if condition making it apply for all type of faults (exec/write/read). It is also conditionalized for book3s, because BOOK3E can also get a PROTFAULT to handle the D/I cache sync. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-15powerpc/xmon: Fix data-breakpointRavi Bangoria
Currently xmon data-breakpoint feature is broken. Whenever there is a watchpoint match occurs, hw_breakpoint_handler will be called by do_break via notifier chains mechanism. If watchpoint is registered by xmon, hw_breakpoint_handler won't find any associated perf_event and returns immediately with NOTIFY_STOP. Similarly, do_break also returns without notifying to xmon. Solve this by returning NOTIFY_DONE when hw_breakpoint_handler does not find any perf_event associated with matched watchpoint, rather than NOTIFY_STOP, which tells the core code to continue calling the other breakpoint handlers including the xmon one. Cc: stable@vger.kernel.org Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-15powerpc/mm: Fix build break with BOOK3S_64=n and MEMORY_HOTPLUG=yMichael Ellerman
The recently merged HPT (Hash Page Table) resize support broke the build when BOOK3S_64=n (ie. 32-bit or 64-bit Book3E) and MEMORY_HOTPLUG=y: arch/powerpc/mm/mem.o: In function `.arch_add_memory': (.text+0x4e4): undefined reference to `.resize_hpt_for_hotplug' Fix it by adding a dummy version. Fixes: 438cc81a41e8 ("powerpc/pseries: Automatically resize HPT for memory hot add/remove") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-15xfrm: Export xfrm_parse_spi.Steffen Klassert
We need it in the ESP offload handlers, so export it. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-02-15net: Prepare gro for packet consuming gro callbacksSteffen Klassert
The upcomming IPsec ESP gro callbacks will consume the skb, so prepare for that. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-02-15net: Add a skb_gro_flush_final helper.Steffen Klassert
Add a skb_gro_flush_final helper to prepare for consuming skbs in call_gro_receive. We will extend this helper to not touch the skb if the skb is consumed by a gro callback with a followup patch. We need this to handle the upcomming IPsec ESP callbacks as they reinject the skb to the napi_gro_receive asynchronous. The handler is used in all gro_receive functions that can call the ESP gro handlers. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-02-15xfrm: Add a secpath_set helper.Steffen Klassert
Add a new helper to set the secpath to the skb. This avoids code duplication, as this is used in multiple places. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-02-15ext4: fix fencepost in s_first_meta_bg validationTheodore Ts'o
It is OK for s_first_meta_bg to be equal to the number of block group descriptor blocks. (It rarely happens, but it shouldn't cause any problems.) https://bugzilla.kernel.org/show_bug.cgi?id=194567 Fixes: 3a4b77cd47bb837b8557595ec7425f281f2ca1fe Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2017-02-14net: ethernet: ti: cpsw: use var instead of func for usage countIvan Khoronzhuk
The usage count function is based on ndev_running flag that is updated before calling ndo_open/close, but if ndo is called in another place, as with suspend/resume, the counter is not changed, that breaks sus/resume. For common resource no difference which device is using it, does matter only device count. So, replace usage count function on var and inc and dec it in ndo_open/close. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14bpf: kernel header files need to be copied into the tools directoryStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14tcp: tcp_probe: use spin_lock_bh()Eric Dumazet
tcp_rcv_established() can now run in process context. We need to disable BH while acquiring tcp probe spinlock, or risk a deadlock. Fixes: 5413d1babe8f ("net: do not block BH while processing socket backlog") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Ricardo Nabinger Sanchez <rnsanchez@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14uapi: fix linux/if_pppol2tp.h userspace compilation errorsDmitry V. Levin
Because of <linux/libc-compat.h> interface limitations, <netinet/in.h> provided by libc cannot be included after <linux/in.h>, therefore any header that includes <netinet/in.h> cannot be included after <linux/in.h>. Change uapi/linux/l2tp.h, the last uapi header that includes <netinet/in.h>, to include <linux/in.h> and <linux/in6.h> instead of <netinet/in.h> and use __SOCK_SIZE__ instead of sizeof(struct sockaddr) the same way as uapi/linux/in.h does, to fix linux/if_pppol2tp.h userspace compilation errors like this: In file included from /usr/include/linux/l2tp.h:12:0, from /usr/include/linux/if_pppol2tp.h:21, /usr/include/netinet/in.h:31:8: error: redefinition of 'struct in_addr' Fixes: 47c3e7783be4 ("net: l2tp: deprecate PPPOL2TP_MSG_* in favour of L2TP_MSG_*") Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14Maintainers: Modify SED list from nvme to blockScott Bauer
Signed-off-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-14Move stack parameters for sed_ioctl to prevent oversized stack with CONFIG_KASANScott Bauer
When CONFIG_KASAN is enabled, compilation fails: block/sed-opal.c: In function 'sed_ioctl': block/sed-opal.c:2447:1: error: the frame size of 2256 bytes is larger than 2048 bytes [-Werror=frame-larger-than=] Moved all the ioctl structures off the stack and dynamically allocate using _IOC_SIZE() Fixes: 455a7b238cd6 ("block: Add Sed-opal library") Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-14uapi: sed-opal fix IOW for activate lsp to use correct structScott Bauer
The IOC_OPAL_ACTIVATE_LSP took the wrong strcure which would give us the wrong size when using _IOC_SIZE, switch it to the right structure. Fixes: 058f8a2 ("Include: Uapi: Add user ABI for Sed/Opal") Signed-off-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-14leds: ledtrig-heartbeat: Make top brightness adjustableJacek Anaszewski
LED class heartbeat trigger allowed only for blinking with max_brightness value. This patch adds more flexibility by exploiting part of LED core software blink infrastructure. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Acked-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2017-02-14tools/leds: Add led_hw_brightness_mon programJacek Anaszewski
LED subsystem supports POLLPRI on "brightness_hw_changed" sysfs file of LED class devices. This tool demonstrates how to use the feature. Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pavel Machek <pavel@ucw.cz>
2017-02-14Revert "i2c: designware: detect when dynamic tar update is possible"Jarkko Nikula
This reverts commit 63d0f0a6952a1a02bc4f116b7da7c7887e46efa3. It caused a regression on platforms where I2C controller is synthesized with dynamic TAR update disabled. Detection code is testing is bit DW_IC_CON_10BITADDR_MASTER in register DW_IC_CON read-only but fails to restore original value in case bit is read-write. Instead of fixing this we revert the commit since it was preparation for the commit 0317e6c0f1dc ("i2c: designware: do not disable adapter after transfer") which was also reverted. Reported-by: Shah Nehal-Bakulchandra <Nehal-bakulchandra.Shah@amd.com> Reported-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Acked-By: Lucas De Marchi <lucas.demarchi@intel.com> Cc: <stable@vger.kernel.org> # v4.9+ Fixes: 63d0f0a6952a ("i2c: designware: detect when dynamic tar update is possible") Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-02-14xen/privcmd: add IOCTL_PRIVCMD_RESTRICTPaul Durrant
The purpose if this ioctl is to allow a user of privcmd to restrict its operation such that it will no longer service arbitrary hypercalls via IOCTL_PRIVCMD_HYPERCALL, and will check for a matching domid when servicing IOCTL_PRIVCMD_DM_OP or IOCTL_PRIVCMD_MMAP*. The aim of this is to limit the attack surface for a compromised device model. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-02-14[media] siano: make it work again with CONFIG_VMAP_STACKMauro Carvalho Chehab
Reported as a Kaffeine bug: https://bugs.kde.org/show_bug.cgi?id=375811 The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. On Kernel 4.9, the default is to not accept DMA on stack anymore on x86 architecture. On other architectures, this has been a requirement since Kernel 2.2. So, after this patch, this driver should likely work fine on all archs. Tested with USB ID 2040:5510: Hauppauge Windham Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-02-14xen/privcmd: Add IOCTL_PRIVCMD_DM_OPPaul Durrant
Recently a new dm_op[1] hypercall was added to Xen to provide a mechanism for restricting device emulators (such as QEMU) to a limited set of hypervisor operations, and being able to audit those operations in the kernel of the domain in which they run. This patch adds IOCTL_PRIVCMD_DM_OP as gateway for __HYPERVISOR_dm_op. NOTE: There is no requirement for user-space code to bounce data through locked memory buffers (as with IOCTL_PRIVCMD_HYPERCALL) since privcmd has enough information to lock the original buffers directly. [1] http://xenbits.xen.org/gitweb/?p=xen.git;a=commit;h=524a98c2 Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Acked-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-02-14packet: fix races in fanout_add()Eric Dumazet
Multiple threads can call fanout_add() at the same time. We need to grab fanout_mutex earlier to avoid races that could lead to one thread freeing po->rollover that was set by another thread. Do the same in fanout_release(), for peace of mind, and to help us finding lockdep issues earlier. Fixes: dc99f600698d ("packet: Add fanout support.") Fixes: 0648ab70afe6 ("packet: rollover prepare: per-socket state") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14pch_gbe: Omit private ndo_get_stats functionTobias Klauser
pch_gbe_get_stats() just returns dev->stats so we can leave it out altogether and let dev_get_stats() do the job. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14net: hip04: Omit private ndo_get_stats functionTobias Klauser
hip04_get_stats() just returns dev->stats so we can leave it out altogether and let dev_get_stats() do the job. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14net_sched: nla_memdup_cookie() can be staticWei Yongjun
Fixes the following sparse warning: net/sched/act_api.c:532:5: warning: symbol 'nla_memdup_cookie' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14ibmvnic: Fix initial MTU settingsThomas Falcon
In the current driver, the MTU is set to the maximum value capable for the backing device. This decision turned out to be a mistake as it led to confusion among users. The expected initial MTU value used for other IBM vNIC capable operating systems is 1500, with the maximum value (9000) reserved for when Jumbo frames are enabled. This patch sets the MTU to the default value for a net device. It also corrects a discrepancy between MTU values received from firmware, which includes the ethernet header length, and net device MTU values. Finally, it removes redundant min/max MTU assignments after device initialization. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14net: ethernet: ti: cpsw: fix cpsw assignment in resumeIvan Khoronzhuk
There is a copy-paste error, which hides breaking of resume for CPSW driver: there was replaced netdev_priv() to ndev_to_cpsw(ndev) in suspend, but left it unchanged in resume. Fixes: 606f39939595a4d4540406bfc11f265b2036af6d (ti: cpsw: move platform data and slaves info to cpsw_common) Reported-by: Alexey Starikovskiy <AStarikovskiy@topcon.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14net: irda: au1k_ir: drop useless includeManuel Lauss
remove useless ioport.h include. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14net: irda: au1k_ir: remove unused timerManuel Lauss
remove the unused timer. I suppose it was intended as a timeout detector, but never properly implemented. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14bpf: reduce compiler warnings by adding fallthrough commentsAlexander Alemayhu
Fixes the following warnings: kernel/bpf/verifier.c: In function ‘may_access_direct_pkt_data’: kernel/bpf/verifier.c:702:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (t == BPF_WRITE) ^ kernel/bpf/verifier.c:704:2: note: here case BPF_PROG_TYPE_SCHED_CLS: ^~~~ kernel/bpf/verifier.c: In function ‘reg_set_min_max_inv’: kernel/bpf/verifier.c:2057:23: warning: this statement may fall through [-Wimplicit-fallthrough=] true_reg->min_value = 0; ~~~~~~~~~~~~~~~~~~~~^~~ kernel/bpf/verifier.c:2058:2: note: here case BPF_JSGT: ^~~~ kernel/bpf/verifier.c:2068:23: warning: this statement may fall through [-Wimplicit-fallthrough=] true_reg->min_value = 0; ~~~~~~~~~~~~~~~~~~~~^~~ kernel/bpf/verifier.c:2069:2: note: here case BPF_JSGE: ^~~~ kernel/bpf/verifier.c: In function ‘reg_set_min_max’: kernel/bpf/verifier.c:2009:24: warning: this statement may fall through [-Wimplicit-fallthrough=] false_reg->min_value = 0; ~~~~~~~~~~~~~~~~~~~~~^~~ kernel/bpf/verifier.c:2010:2: note: here case BPF_JSGT: ^~~~ kernel/bpf/verifier.c:2019:24: warning: this statement may fall through [-Wimplicit-fallthrough=] false_reg->min_value = 0; ~~~~~~~~~~~~~~~~~~~~~^~~ kernel/bpf/verifier.c:2020:2: note: here case BPF_JSGE: ^~~~ Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Alexander Alemayhu <alexander@alemayhu.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14pcnet32: fix BNC/AUI port on AM79C970AOndrej Zary
Even though the port autoselection is enabled by default on AM79C970A, BNC/AUI port does not work because the link is always reported to be down. The link state reported by the chip belongs only to the TP port but the driver uses it regardless of the port used. The chip can't detect BNC/AUI link state. Disable port autoselection and use TP port by default to keep current behavior (link detection works on TP port, BNC/AUI port does not work). Implement ethtool autoneg, port and duplex configuration to allow using the BNC/AUI port. Report the TP link state only if the TP port is selected. When the port autoselection is enabled or AUI port is selected, report the link as always up. Move pcnet32_suspend() and pcnet32_clr_suspend() functions to avoid forward declarations. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14pcnet32: factor out pcnet32_clr_suspend()Ondrej Zary
Move the code to clear SUSPEND flag to a separate function to simplify code. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14perf tools: Be consistent on the type of map->symbols[] interatorArnaldo Carvalho de Melo
In a few cases we were using 'enum map_type' and that triggered this warning when using clang: util/session.c:1923:16: error: comparison of constant 2 with expression of type 'enum map_type' is always true [-Werror,-Wtautological-constant-out-of-range-compare] for (i = 0; i < MAP__NR_TYPES; ++i) { Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-i6uyo6bsopa2dghnx8qo7rri@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-14perf intel pt decoder: clang has no -Wno-override-initArnaldo Carvalho de Melo
So set it only for other compilers, allowing us to overcome yet another build failure due to an inexistent clang -W option: error: unknown warning option '-Wno-override-init'; did you mean '-Wno-override-module'? [-Werror,-Wunknown-warning-option] Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-oaa1ici3j8nygp4pzl2oobh3@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-14perf evsel: Do not put a variable sized type not at the end of a structArnaldo Carvalho de Melo
As this is a GNU extension and while harmless in this case, we can do the same thing in a more clearer way by using a existing thread_map and cpu_map constructors: With this we avoid this while compiling with clang: util/evsel.c:1659:17: error: field 'map' with variable sized type 'struct cpu_map' not at the end of a struct or class is a GNU extension [-Werror,-Wgnu-variable-sized-type-not-at-end] struct cpu_map map; ^ util/evsel.c:1667:20: error: field 'map' with variable sized type 'struct thread_map' not at the end of a struct or class is a GNU extension [-Werror,-Wgnu-variable-sized-type-not-at-end] struct thread_map map; ^ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-207juvrqjiar7uvas2s83v5i@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-14audit: remove unnecessary curly braces from switch/case statementsPaul Moore
Signed-off-by: Paul Moore <paul@paul-moore.com>
2017-02-14perf probe: Avoid accessing uninitialized 'map' variableArnaldo Carvalho de Melo
Genuine problem detected with clang, the warnings are spot on: util/probe-event.c:2079:7: error: variable 'map' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] if (addr) { ^~~~ util/probe-event.c:2094:6: note: uninitialized use occurs here if (map && !is_kprobe) { ^~~ util/probe-event.c:2079:3: note: remove the 'if' if its condition is always true if (addr) { ^~~~~~~~~~ util/probe-event.c:2075:8: error: variable 'map' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized] if (kernel_get_symbol_address_by_name(tp->symbol, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ util/probe-event.c:2094:6: note: uninitialized use occurs here if (map && !is_kprobe) { ^~~ util/probe-event.c:2075:4: note: remove the 'if' if its condition is always false if (kernel_get_symbol_address_by_name(tp->symbol, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ util/probe-event.c:2064:17: note: initialize the variable 'map' to silence this warning struct map *map; ^ = NULL Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-m3501el55i10hctfbmi2qxzr@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-14usb: musb: add code comment for clarificationGustavo A. R. Silva
Add code comment to make it clear that the fall-through is intentional. Read the link for more details: https://lkml.org/lkml/2017/2/9/292 Addresses-Coverity-ID: 1397608 Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-14vmbus: replace modulus operation with subtractionStephen Hemminger
Takes less clock cycles to check for ring wrap and subtract than to do a modulus instruction. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-14vmbus: constify parameters where possibleStephen Hemminger
Functions that just query state of ring buffer can have parameters marked const. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-14vmbus: expose hv_begin/end_readStephen Hemminger
In order to implement NAPI in netvsc, the driver needs access to control host interrupt mask. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-14vmbus: remove conditional locking of vmbus_writeStephen Hemminger
All current usage of vmbus write uses the acquire_lock flag, therefore having it be optional is unnecessary. This also fixes a sparse warning since sparse doesn't like when a function has conditional locking. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-14vmbus: add direct isr callback modeStephen Hemminger
Change the simple boolean batched_reading into a tri-value. For future NAPI support in netvsc driver, the callback needs to occur directly in interrupt handler. Batched mode is also changed to disable host interrupts immediately in interrupt routine (to avoid unnecessary host signals), and the tasklet is rescheduled if more data is detected. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-14vmbus: change to per channel taskletStephen Hemminger
Make the event handling tasklet per channel rather than per-cpu. This allows for better fairness when getting lots of data on the same cpu. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-14vmbus: put related per-cpu variable togetherStephen Hemminger
The hv_context structure had several arrays which were per-cpu and was allocating small structures (tasklet_struct). Instead use a single per-cpu array. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-14vmbus: callback is in softirq not workqueueStephen Hemminger
The callback is done via tasklet not workqueue. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-14perf tools: Do not put a variable sized type not at the end of a structArnaldo Carvalho de Melo
As this is a GNU extension and while harmless in this case, we can do the same thing in a more clearer way by using an existing thread_map constructor. With this we avoid this while compiling with clang: util/parse-events.c:2024:21: error: field 'map' with variable sized type 'struct thread_map' not at the end of a struct or class is a GNU extension [-Werror,-Wgnu-variable-sized-type-not-at-end] struct thread_map map; ^ 1 error generated. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-tqocbplnyyhpst6drgm2u4m3@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-14perf record: Do not put a variable sized type not at the end of a structArnaldo Carvalho de Melo
As this is a GNU extension and while harmless in this case, we can do the same thing in a more clearer way by using an existing thread_map constructor. With this we avoid this while compiling with clang: builtin-record.c:659:21: error: field 'map' with variable sized type 'struct thread_map' not at the end of a struct or class is a GNU extension [-Werror,-Wgnu-variable-sized-type-not-at-end] struct thread_map map; ^ 1 error generated. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-c9drclo52ezxmwa7qxklin2y@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-13 02:45:53 +0000