summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-09-30counter: Consolidate Counter extension sysfs attribute creationWilliam Breathitt Gray
Counter extensions are handled for the Device, Counts, and Signals. The code loops through each Counter extension and creates the expected sysfs attributes. This patch consolidates that code into functions to reduce redundancy and make the intention of the code clearer. Link: https://lore.kernel.org/r/6f2121cf52073028c119dbf981a8b72f3eb625d2.1664204990.git.william.gray@linaro.org/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Link: https://lore.kernel.org/r/0469c3ae3fbccbca908993c78d94f221761a6a3a.1664318353.git.william.gray@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-30counter: Introduce the Count capture componentWilliam Breathitt Gray
Some devices provide a latch function to save historic Count values. This patch standardizes exposure of such functionality as Count capture components. A COUNTER_COMP_CAPTURE macro is provided for driver authors to define a capture component. A new event COUNTER_EVENT_CAPTURE is introduced to represent Count value capture events. Cc: Julien Panis <jpanis@baylibre.com> Link: https://lore.kernel.org/r/c239572ab4208d0d6728136e82a88ad464369a7a.1664204990.git.william.gray@linaro.org/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Link: https://lore.kernel.org/r/3cebaa0b807a225eb277d771504fe6dba7269ffd.1664318353.git.william.gray@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-30counter: 104-quad-8: Add Signal polarity componentWilliam Breathitt Gray
The 104-quad-8 driver provides support for Index signal polarity modes via the "index_polarity" Signal component. This patch exposes the same functionality through the more standard "polarity" Signal component. Link: https://lore.kernel.org/r/01d00c21873159833035cb6775d0d0e8ad55f2ef.1664204990.git.william.gray@linaro.org/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Link: https://lore.kernel.org/r/0bf840beee1665e9f04ea82368ecdde87c791a22.1664318353.git.william.gray@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-30counter: Introduce the Signal polarity componentWilliam Breathitt Gray
The Signal polarity component represents the active level of a respective Signal. There are two possible states: positive (rising edge) and negative (falling edge); enum counter_signal_polarity represents these states. A convenience macro COUNTER_COMP_POLARITY() is provided for driver authors to declare a Signal polarity component. Cc: Julien Panis <jpanis@baylibre.com> Link: https://lore.kernel.org/r/8f47d6e1db71a11bb1e2666f8e2a6e9d256d4131.1664204990.git.william.gray@linaro.org/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Link: https://lore.kernel.org/r/b6e53438badcb6318997d13dd2fc052f97d808ac.1664318353.git.william.gray@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-30counter: interrupt-cnt: Implement watch_validate callbackWilliam Breathitt Gray
The interrupt-cnt counter driver only pushes one type of event on only one channel: COUNTER_EVENT_CHANGE_OF_STATE on channel 0. The interrupt_cnt_watch_validate() watch_valid callback is implemented to ensure watch configurations are valid for this driver. Cc: Oleksij Rempel <linux@rempel-privat.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Link: https://lore.kernel.org/r/20220815225058.144203-1-william.gray@linaro.org/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Link: https://lore.kernel.org/r/c50b5eede7d3f523de8dc3937dc44680f2773e1d.1664318353.git.william.gray@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-30counter: Move symbols into COUNTER namespaceWilliam Breathitt Gray
Counter subsystem symbols are only relevant to counter drivers. A COUNTER namespace is created to control the availability of these symbols to modules that import this namespace explicitly. Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Oleksij Rempel <linux@rempel-privat.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Acked-by: David Lechner <david@lechnology.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20220815220321.74161-1-william.gray@linaro.org/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Link: https://lore.kernel.org/r/8a756df96c24946547a7ece5caa5f654809c5e7f.1664318353.git.william.gray@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-30MAINTAINERS: Update Counter subsystem git tree repo linkWilliam Breathitt Gray
The Counter subsystem git tree is now located on the kernel.org git server. Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Link: https://lore.kernel.org/r/075c91bb0af32d27a139112701b12b118a50edd6.1664318353.git.william.gray@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-30ARM: dts: exynos: fix polarity of VBUS GPIO of OrigenDmitry Torokhov
EHCI Oxynos (drivers/usb/host/ehci-exynos.c) drives VBUS GPIO high when trying to power up the bus, therefore the GPIO in DTS must be marked as "active high". This will be important when EHCI driver is converted to gpiod API that respects declared polarities. Fixes: 4e8991def565 ("ARM: dts: exynos: Enable AX88760 USB hub on Origen board") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://lore.kernel.org/r/20220927220504.3744878-1-dmitry.torokhov@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-09-30arm64: dts: exynos: fix polarity of "enable" line of NFC chip in TM2Dmitry Torokhov
According to s3fwrn5 driver code the "enable" GPIO line is driven "high" when chip is not in use (mode is S3FWRN5_MODE_COLD), and is driven "low" when chip is in use. s3fwrn5_phy_power_ctrl(): ... gpio_set_value(phy->gpio_en, 1); ... if (mode != S3FWRN5_MODE_COLD) { msleep(S3FWRN5_EN_WAIT_TIME); gpio_set_value(phy->gpio_en, 0); msleep(S3FWRN5_EN_WAIT_TIME); } Therefore the line described by "en-gpios" property should be annotated as "active low". The wakeup gpio appears to have correct polarity (active high). Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://lore.kernel.org/r/20220929011557.4165216-1-dmitry.torokhov@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-09-30ip6_vti:Remove the space before the commaHongbin Wang
There should be no space before the comma Signed-off-by: Hongbin Wang <wh_bin@126.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-30Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2022-09-29 1) Use the inner instead of the outer protocol for GSO on inter address family tunnels. This fixes the GSO case for address family tunnels. From Sabrina Dubroca. 2) Reset ipcomp_scratches with NULL when freed, otherwise it holds obsolete address. From Khalid Masum. 3) Reinject transport-mode packets through workqueue instead of a tasklet. The tasklet might take too long to finish. From Liu Jian. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-30Merge branch 'Mediatek-mt8188'David S. Miller
Jianguo Zhang says: ==================== Mediatek ethernet patches for mt8188 Changes in v7: v7: 1) Add 'Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>' info in commit message of patch 'dt-bindings: net: snps,dwmac: add new property snps,clk-csr', 'arm64: dts: mediatek: mt2712e: Update the name of property 'clk_csr'' and 'net: stmmac: add a parse for new property 'snps,clk-csr''. v6: 1) Update commit message of patch 'dt-bindings: net: snps,dwmac: add new property snps,clk-csr' 2) Add a parse for new property 'snps,clk-csr' in patch 'net: stmmac: add a parse for new property 'snps,clk-csr'' v5: 1) Rename the property 'clk_csr' as 'snps,clk-csr' in binding file as Krzysztof Kozlowski'comment. 2) Add DTS patch 'arm64: dts: mediatek: mt2712e: Update the name of property 'clk_csr'' as Krzysztof Kozlowski'comment. 3) Add driver patch 'net: stmmac: Update the name of property 'clk_csr'' as Krzysztof Kozlowski'comment. v4: 1) Update the commit message of patch 'dt-bindings: net: snps,dwmac: add clk_csr property' as Krzysztof Kozlowski'comment. v3: 1) List the names of SoCs mt8188 and mt8195 in correct order as AngeloGioacchino Del Regno's comment. 2) Add patch version info as Krzysztof Kozlowski'comment. v2: 1) Delete patch 'stmmac: dwmac-mediatek: add support for mt8188' as Krzysztof Kozlowski's comment. 2) Update patch 'dt-bindings: net: mediatek-dwmac: add support for mt8188' as Krzysztof Kozlowski's comment. 3) Add clk_csr property to fix warning ('clk_csr' was unexpected) when runnig 'make dtbs_check'. v1: 1) Add ethernet driver entry for mt8188. 2) Add binding document for ethernet on mt8188. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-30net: stmmac: add a parse for new property 'snps,clk-csr'Jianguo Zhang
Parse new property 'snps,clk-csr' firstly because the new property is documented in binding file, if failed, fall back to old property 'clk_csr' for legacy case Signed-off-by: Jianguo Zhang <jianguo.zhang@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-30arm64: dts: mediatek: mt2712e: Update the name of property 'clk_csr'Jianguo Zhang
Update the name of property 'clk_csr' as 'snps,clk-csr' to align with the property name in the binding file. Signed-off-by: Jianguo Zhang <jianguo.zhang@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-30dt-bindings: net: snps,dwmac: add new property snps,clk-csrJianguo Zhang
Add description for new property snps,clk-csr in binding file Signed-off-by: Jianguo Zhang <jianguo.zhang@mediatek.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-30dt-bindings: net: mediatek-dwmac: add support for mt8188Jianguo Zhang
Add binding document for the ethernet on mt8188 Signed-off-by: Jianguo Zhang <jianguo.zhang@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-30Merge tag 'fsi-for-v6.1-2' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/joel/fsi into char-misc-next Joel writes: "FSI changes for v6.1 * Fix a OCC hwmon userspace compatibility regression that was introduced in v5.19 * Device tree bindings for the OCC * A bunch of janitor type fixes" * tag 'fsi-for-v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/fsi: fsi: core: Check error number after calling ida_simple_get hwmon: (occ) Check for device property for setting OCC active during probe fsi: occ: Support probing the hwmon child device from dts node dt-bindings: hwmon: Add IBM OCC bindings fsi: master-ast-cf: Fix missing of_node_put in fsi_master_acf_probe fsi: sbefifo: Add detailed debugging information fsi: cleanup extern usage in function definition fsi: occ: Prevent use after free hwmon (occ): Retry for checksum failure fsi: occ: Fix checksum failure mode fsi: Fix typo in comment
2022-09-30net/mlx5: Fix spelling mistake "syndrom" -> "syndrome"Colin Ian King
There is a spelling mistake in a devlink_health_report message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-30net: bna: Fix spelling mistake "muliple" -> "multiple"Colin Ian King
There is a spelling mistake in a literal string in the array bnad_net_stats_strings. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-30usb: gadget: uvc: Fix argument to sizeof() in uvc_register_video()Nathan Chancellor
When building s390 allmodconfig after commit 9b91a6523078 ("usb: gadget: uvc: increase worker prio to WQ_HIGHPRI"), the following error occurs: In file included from ../include/linux/string.h:253, from ../include/linux/bitmap.h:11, from ../include/linux/cpumask.h:12, from ../include/linux/smp.h:13, from ../include/linux/lockdep.h:14, from ../include/linux/rcupdate.h:29, from ../include/linux/rculist.h:11, from ../include/linux/pid.h:5, from ../include/linux/sched.h:14, from ../include/linux/ratelimit.h:6, from ../include/linux/dev_printk.h:16, from ../include/linux/device.h:15, from ../drivers/usb/gadget/function/f_uvc.c:9: In function ‘fortify_memset_chk’, inlined from ‘uvc_register_video’ at ../drivers/usb/gadget/function/f_uvc.c:424:2: ../include/linux/fortify-string.h:301:25: error: call to ‘__write_overflow_field’ declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning] 301 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This points to the memset() in uvc_register_video(). It is clear that the argument to sizeof() is incorrect, as uvc->vdev (a 'struct video_device') is being zeroed out but the size of uvc->video (a 'struct uvc_video') is being used as the third arugment to memset(). pahole shows that prior to commit 9b91a6523078 ("usb: gadget: uvc: increase worker prio to WQ_HIGHPRI"), 'struct video_device' and 'struct ucv_video' had the same size, meaning that the argument to sizeof() is incorrect semantically but there is no visible issue: $ pahole -s build/drivers/usb/gadget/function/f_uvc.o | grep -E "(uvc_video|video_device)\s+" video_device 1400 4 uvc_video 1400 3 After that change, uvc_video becomes slightly larger, meaning that the memset() will overwrite by 8 bytes: $ pahole -s build/drivers/usb/gadget/function/f_uvc.o | grep -E "(uvc_video|video_device)\s+" video_device 1400 4 uvc_video 1408 3 Fix the arugment to sizeof() so that there is no overwrite. Cc: stable@vger.kernel.org Fixes: e4ce9ed835bc ("usb: gadget: uvc: ensure the vdev is unset") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220928201921.3152163-1-nathan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-30usb: host: ehci-exynos: switch to using gpiod APIDmitry Torokhov
This patch switches the driver from using legacy gpio API to the newer gpiod API. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220927220504.3744878-2-dmitry.torokhov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-30Revert "usb: dwc3: Don't switch OTG -> peripheral if extcon is present"Andy Shevchenko
This reverts commit 0f01017191384e3962fa31520a9fd9846c3d352f. As pointed out by Ferry this breaks Dual Role support on Intel Merrifield platforms. Fixes: 0f0101719138 ("usb: dwc3: Don't switch OTG -> peripheral if extcon is present") Reported-by: Ferry Toth <fntoth@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Ferry Toth <fntoth@gmail.com> # for Merrifield Reviewed-by: Sven Peter <sven@svenpeter.dev> Link: https://lore.kernel.org/r/20220927155332.10762-3-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-30Revert "USB: fixup for merge issue with "usb: dwc3: Don't switch OTG -> ↵Andy Shevchenko
peripheral if extcon is present"" This reverts commit 8bd6b8c4b1009d7d2662138d6bdc6fe58a9274c5. Prerequisite revert for the reverting of the original commit 0f0101719138. Fixes: 8bd6b8c4b100 ("USB: fixup for merge issue with "usb: dwc3: Don't switch OTG -> peripheral if extcon is present"") Fixes: 0f0101719138 ("usb: dwc3: Don't switch OTG -> peripheral if extcon is present") Reported-by: Ferry Toth <fntoth@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Ferry Toth <fntoth@gmail.com> # for Merrifield Link: https://lore.kernel.org/r/20220927155332.10762-2-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-30spi: Ensure that sg_table won't be used after being freedMarek Szyprowski
SPI code checks for non-zero sgt->orig_nents to determine if the buffer has been DMA-mapped. Ensure that sg_table is really zeroed after free to avoid potential NULL pointer dereference if the given SPI xfer object is reused again without being DMA-mapped. Fixes: 0c17ba73c08f ("spi: Fix cache corruption due to DMA/PIO overlap") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20220930113408.19720-1-m.szyprowski@samsung.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-09-30dt-bindings: usb: Convert FOTG210 to dt schemaLinus Walleij
This converts the Faraday FOTG210 OTG USB controller to use a YAML schema. We add all the right includes for OTG controllers and make it possible to specify dr_mode and phy. Cc: devicetree@vger.kernel.org Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220925123546.770843-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-30usb: mtu3: fix failed runtime suspend in host only modeChunfeng Yun
When the dr_mode is "host", after the host enter runtime suspend, the mtu3 can't do it, because the mtu3's device wakeup function is not enabled, instead it's enabled in gadget init function, to fix the issue, init wakeup early in mtu3's probe() Fixes: 6b587394c65c ("usb: mtu3: support suspend/resume for dual-role mode") Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reported-by: Tianping Fang <tianping.fang@mediatek.com> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20220929064459.32522-1-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-30USB: omap_udc: Fix spelling mistake: "tranceiver_ctrl" -> "transceiver_ctrl"Colin Ian King
There is a spelling mistake in the control name. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20220928221140.67495-1-colin.i.king@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-30usb: typec: ucsi_ccg: Disable UCSI ALT support on TegraSing-Han Chen
Firmware built for Tegra doesn't support UCSI ALT command and has known issue of reporting wrong capability info. This commit disables UCSI ALT support when reading the capability on Tegra. Signed-off-by: Sing-Han Chen <singhanc@nvidia.com> Signed-off-by: Wayne Chang <waynec@nvidia.com> Link: https://lore.kernel.org/r/20220928150840.3804313-1-waynec@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-30usb: typec: Replace custom implementation of device_match_fwnode()Andy Shevchenko
Replace custom implementation of the device_match_fwnode(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20220927171924.61908-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-30usb: typec: ucsi: Don't warn on probe deferralWayne Chang
Deferred probe is an expected return value for fwnode_usb_role_switch_get(). Given that the driver deals with it properly, there's no need to output a warning that may potentially confuse users. -- V2 -> V3: remove the Fixes and Cc V1 -> V2: adjust the coding style for better reading format. drivers/usb/typec/ucsi/ucsi.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) Signed-off-by: Wayne Chang <waynec@nvidia.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20220927134512.2651067-1-waynec@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-30usb: add quirks for Lenovo OneLink+ DockJean-Francois Le Fillatre
The Lenovo OneLink+ Dock contains two VL812 USB3.0 controllers: 17ef:1018 upstream 17ef:1019 downstream These hubs suffer from two separate problems: 1) After the host system was suspended and woken up, the hubs appear to be in a random state. Some downstream ports (both internal to the built-in audio and network controllers, and external to USB sockets) may no longer be functional. The exact list of disabled ports (if any) changes from wakeup to wakeup. Ports remain in that state until the dock is power-cycled, or until the laptop is rebooted. Wakeup sources connected to the hubs (keyboard, WoL on the integrated gigabit controller) will wake the system up from suspend, but they may no longer work after wakeup (and in that case will no longer work as wakeup source in a subsequent suspend-wakeup cycle). This issue appears in the logs with messages such as: usb 1-6.1-port4: cannot disable (err = -71) usb 1-6-port2: cannot disable (err = -71) usb 1-6.1: clear tt 1 (80c0) error -71 usb 1-6-port4: cannot disable (err = -71) usb 1-6.4: PM: dpm_run_callback(): usb_dev_resume+0x0/0x10 [usbcore] returns -71 usb 1-6.4: PM: failed to resume async: error -71 usb 1-7: reset full-speed USB device number 5 using xhci_hcd usb 1-6.1-port1: cannot reset (err = -71) usb 1-6.1-port1: cannot reset (err = -71) usb 1-6.1-port1: cannot reset (err = -71) usb 1-6.1-port1: cannot reset (err = -71) usb 1-6.1-port1: cannot reset (err = -71) usb 1-6.1-port1: Cannot enable. Maybe the USB cable is bad? usb 1-6.1-port1: cannot disable (err = -71) usb 1-6.1-port1: cannot reset (err = -71) usb 1-6.1-port1: cannot reset (err = -71) usb 1-6.1-port1: cannot reset (err = -71) usb 1-6.1-port1: cannot reset (err = -71) usb 1-6.1-port1: cannot reset (err = -71) usb 1-6.1-port1: Cannot enable. Maybe the USB cable is bad? usb 1-6.1-port1: cannot disable (err = -71) 2) Some USB devices cannot be enumerated properly. So far I have only seen the issue with USB 3.0 devices. The same devices work without problem directly connected to the host system, to other systems or to other hubs (even when those hubs are connected to the OneLink+ dock). One very reliable reproducer is this USB 3.0 HDD enclosure: 152d:9561 JMicron Technology Corp. / JMicron USA Technology Corp. Mobius I have seen it happen sporadically with other USB 3.0 enclosures, with controllers from different manufacturers, all self-powered. Typical messages in the logs: xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command usb 2-1.4: device not accepting address 6, error -62 xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command usb 2-1.4: device not accepting address 7, error -62 usb 2-1-port4: attempt power cycle xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command usb 2-1.4: device not accepting address 8, error -62 xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command usb 2-1.4: device not accepting address 9, error -62 usb 2-1-port4: unable to enumerate USB device Through trial and error, I found that the USB_QUIRK_RESET_RESUME solved the second issue. Further testing then uncovered the first issue. Test results are summarized in this table: ======================================================================================= Settings USB2 hotplug USB3 hotplug State after waking up --------------------------------------------------------------------------------------- power/control=auto works fails broken usbcore.autosuspend=-1 works works broken OR power/control=on power/control=auto works (1) works (1) works and USB_QUIRK_RESET_RESUME power/control=on works works works and USB_QUIRK_RESET_RESUME HUB_QUIRK_DISABLE_AUTOSUSPEND works works works and USB_QUIRK_RESET_RESUME ======================================================================================= In those results, the power/control settings are applied to both hubs, both on the USB2 and USB3 side, before each test. From those results, USB_QUIRK_RESET_RESUME is required to reset the hubs properly after a suspend-wakeup cycle, and the hubs must not autosuspend to work around the USB3 issue. A secondary effect of USB_QUIRK_RESET_RESUME is to prevent the hubs' upstream links from suspending (the downstream ports can still suspend). This secondary effect is used in results (1). It is enough to solve the USB3 problem. Setting USB_QUIRK_RESET_RESUME on those hubs is the smallest patch that solves both issues. Prior to creating this patch, I have used the USB_QUIRK_RESET_RESUME via the kernel command line for over a year without noticing any side effect. Thanks to Oliver Neukum @Suse for explanations of the operations of USB_QUIRK_RESET_RESUME, and requesting more testing. Signed-off-by: Jean-Francois Le Fillatre <jflf_kernel@gmx.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20220927073407.5672-1-jflf_kernel@gmx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-30Merge tag 'thunderbolt-for-v6.1-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next Mika writes: "thunderbolt: Changes for v6.1 merge window This includes following Thunderbolt/USB4 changes for the v6.1 merge window: - Support for Intel Meteor Lake integrated Thunderbolt/USB4 controller - Support for ASMedia USB4 controller NVM firmware upgrade - Receiver lane margining support - Few fixes and cleanups. All these have been in linux-next with no reported issues." * tag 'thunderbolt-for-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: thunderbolt: Explicitly enable lane adapter hotplug events at startup thunderbolt: Use dev_err_probe() thunderbolt: Convert to use sysfs_emit()/sysfs_emit_at() APIs thunderbolt: Fix spelling mistake "simultaneusly" -> "simultaneously" thunderbolt: debugfs: Fix spelling mistakes in seq_puts text thunderbolt: Add support for ASMedia NVM image format thunderbolt: Move vendor specific NVM handling into nvm.c thunderbolt: Provide tb_retimer_nvm_read() analogous to tb_switch_nvm_read() thunderbolt: Rename and make nvm_read() available for other files thunderbolt: Extend NVM version fields to 32-bits thunderbolt: Allow NVM upgrade of USB4 host routers thunderbolt: Add support for receiver lane margining thunderbolt: Add helper to check if CL states are enabled on port thunderbolt: Pass CL state bitmask to tb_port_clx_supported() thunderbolt: Move port CL state functions into correct place in switch.c thunderbolt: Move tb_xdomain_parent() to tb.h thunderbolt: Add support for Intel Meteor Lake thunderbolt: Add comment where Thunderbolt 4 PCI IDs start thunderbolt: Add DP OUT resource when DP tunnel is discovered
2022-09-30ibmveth: Ethtool set queue supportNick Child
Implement channel management functions to allow dynamic addition and removal of transmit queues. The `ethtool --show-channels` and `ethtool --set-channels` commands can be used to get and set the number of queues, respectively. Allow the ability to add as many transmit queues as available processors but never allow more than the hard maximum of 16. The number of receive queues is one and cannot be modified. Depending on whether the requested number of queues is larger or smaller than the current value, either allocate or free long term buffers. Since long term buffer construction and destruction can occur in two different areas, from either channel set requests or device open/close, define functions for performing this work. If allocation of a new buffer fails, then attempt to revert back to the previous number of queues. Signed-off-by: Nick Child <nnac123@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-30ibmveth: Implement multi queue on xmitNick Child
The `ndo_start_xmit` function is protected by a spinlock on the tx queue being used to transmit the skb. Allow concurrent calls to `ndo_start_xmit` by using more than one tx queue. This allows for greater throughput when several jobs are trying to transmit data. Introduce 16 tx queues (leave single rx queue as is) which each correspond to one DMA mapped long term buffer. Signed-off-by: Nick Child <nnac123@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-30ibmveth: Copy tx skbs into a premapped bufferNick Child
Rather than DMA mapping and unmapping every outgoing skb, copy the skb into a buffer that was mapped during the drivers open function. Copying the skb and its frags have proven to be more time efficient than mapping and unmapping. As an effect, performance increases by 3-5 Gbits/s. Allocate and DMA map one continuous 64KB buffer at `ndo_open`. This buffer is maintained until `ibmveth_close` is called. This buffer is large enough to hold the largest possible linnear skb. During `ndo_start_xmit`, copy the skb and all of it's frags into the continuous buffer. By manually linnearizing all the socket buffers, time is saved during memcpy as well as more efficient handling in FW. As a result, we no longer need to worry about the firmware limitation of handling a max of 6 frags. So, we only need to maintain 1 descriptor instead of 6 and can hardcode 0 for the other 5 descriptors during h_send_logical_lan. Since, DMA allocation/mapping issues can no longer arise in xmit functions, we can further reduce code size by removing the need for a bounce buffer on DMA errors. Signed-off-by: Nick Child <nnac123@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-30bnx2: Fix spelling mistake "bufferred" -> "buffered"Colin Ian King
There are spelling mistakes in two literal strings. Fix these. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-30tcp: fix tcp_cwnd_validate() to not forget is_cwnd_limitedNeal Cardwell
This commit fixes a bug in the tracking of max_packets_out and is_cwnd_limited. This bug can cause the connection to fail to remember that is_cwnd_limited is true, causing the connection to fail to grow cwnd when it should, causing throughput to be lower than it should be. The following event sequence is an example that triggers the bug: (a) The connection is cwnd_limited, but packets_out is not at its peak due to TSO deferral deciding not to send another skb yet. In such cases the connection can advance max_packets_seq and set tp->is_cwnd_limited to true and max_packets_out to a small number. (b) Then later in the round trip the connection is pacing-limited (not cwnd-limited), and packets_out is larger. In such cases the connection would raise max_packets_out to a bigger number but (unexpectedly) flip tp->is_cwnd_limited from true to false. This commit fixes that bug. One straightforward fix would be to separately track (a) the next window after max_packets_out reaches a maximum, and (b) the next window after tp->is_cwnd_limited is set to true. But this would require consuming an extra u32 sequence number. Instead, to save space we track only the most important information. Specifically, we track the strongest available signal of the degree to which the cwnd is fully utilized: (1) If the connection is cwnd-limited then we remember that fact for the current window. (2) If the connection not cwnd-limited then we track the maximum number of outstanding packets in the current window. In particular, note that the new logic cannot trigger the buggy (a)/(b) sequence above because with the new logic a condition where tp->packets_out > tp->max_packets_out can only trigger an update of tp->is_cwnd_limited if tp->is_cwnd_limited is false. This first showed up in a testing of a BBRv2 dev branch, but this buggy behavior highlighted a general issue with the tcp_cwnd_validate() logic that can cause cwnd to fail to increase at the proper rate for any TCP congestion control, including Reno or CUBIC. Fixes: ca8a22634381 ("tcp: make cwnd-limited checks measurement-based, and gentler") Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Kevin(Yudong) Yang <yyd@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-30sctp: handle the error returned from sctp_auth_asoc_init_active_keyXin Long
When it returns an error from sctp_auth_asoc_init_active_key(), the active_key is actually not updated. The old sh_key will be freeed while it's still used as active key in asoc. Then an use-after-free will be triggered when sending patckets, as found by syzbot: sctp_auth_shkey_hold+0x22/0xa0 net/sctp/auth.c:112 sctp_set_owner_w net/sctp/socket.c:132 [inline] sctp_sendmsg_to_asoc+0xbd5/0x1a20 net/sctp/socket.c:1863 sctp_sendmsg+0x1053/0x1d50 net/sctp/socket.c:2025 inet_sendmsg+0x99/0xe0 net/ipv4/af_inet.c:819 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 This patch is to fix it by not replacing the sh_key when it returns errors from sctp_auth_asoc_init_active_key() in sctp_auth_set_key(). For sctp_auth_set_active_key(), old active_key_id will be set back to asoc->active_key_id when the same thing happens. Fixes: 58acd1009226 ("sctp: update active_key for asoc when old key is being replaced") Reported-by: syzbot+a236dd8e9622ed8954a3@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-30net: bridge: assign path_cost for 2.5G and 5G link speedSteven Hsieh
As 2.5G, 5G ethernet ports are more common and affordable, these ports are being used in LAN bridge devices. STP port_cost() is missing path_cost assignment for these link speeds, causes highest cost 100 being used. This result in lower speed port being picked when there is loop between 5G and 1G ports. Original path_cost: 10G=2, 1G=4, 100m=19, 10m=100 Adjusted path_cost: 10G=2, 5G=3, 2.5G=4, 1G=5, 100m=19, 10m=100 speed greater than 10G = 1 Signed-off-by: Steven Hsieh <steven.hsieh@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-30net: lan966x: Fix spelling mistake "tarffic" -> "traffic"Colin Ian King
There is a spelling mistake in a netdev_err message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-30mISDN: fix use-after-free bugs in l1oip timer handlersDuoming Zhou
The l1oip_cleanup() traverses the l1oip_ilist and calls release_card() to cleanup module and stack. However, release_card() calls del_timer() to delete the timers such as keep_tl and timeout_tl. If the timer handler is running, the del_timer() will not stop it and result in UAF bugs. One of the processes is shown below: (cleanup routine) | (timer handler) release_card() | l1oip_timeout() ... | del_timer() | ... ... | kfree(hc) //FREE | | hc->timeout_on = 0 //USE Fix by calling del_timer_sync() in release_card(), which makes sure the timer handlers have finished before the resources, such as l1oip and so on, have been deallocated. What's more, the hc->workq and hc->socket_thread can kick those timers right back in. We add a bool flag to show if card is released. Then, check this flag in hc->workq and hc->socket_thread. Fixes: 3712b42d4b1b ("Add layer1 over IP support") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-30net-next: skbuff: refactor pskb_pullRichard Gobert
pskb_may_pull already contains all of the checks performed by pskb_pull. Use pskb_may_pull for validation in pskb_pull, eliminating the duplication and making __pskb_pull obsolete. Replace __pskb_pull with pskb_pull where applicable. Signed-off-by: Richard Gobert <richardbgobert@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-30MAINTAINERS: switch dwc3 to ThinhFelipe Balbi
Thinh Nguyen has agreed to become the new dwc3 maintainer seeing that I haven't had time to dedicate to the mailing list. Signed-off-by: Felipe Balbi <balbi@kernel.org> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20220929074844.351938-1-balbi@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-30net: bonding: Convert to use sysfs_emit()/sysfs_emit_at() APIsWang Yufen
Follow the advice of the Documentation/filesystems/sysfs.rst and show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Signed-off-by: Wang Yufen <wangyufen@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-30net-sysfs: Convert to use sysfs_emit() APIsWang Yufen
Follow the advice of the Documentation/filesystems/sysfs.rst and show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Signed-off-by: Wang Yufen <wangyufen@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-30net: tun: Convert to use sysfs_emit() APIsWang Yufen
Follow the advice of the Documentation/filesystems/sysfs.rst and show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Signed-off-by: Wang Yufen <wangyufen@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-30ASoC: qcom: fix unmet direct dependencies for SND_SOC_QDSP6Srinivas Kandagatla
SND_SOC_QDSP6 already has COMPILE_TEST so remove that from SND_SOC_SC8280XP and also add QCOM_APR dependencies to SND_SOC_SC8280XP like other Qualcomm machine drivers. This should also fix below warning: on x86_64, when QCOM_APR is not set and COMPILE_TEST=y: WARNING: unmet direct dependencies detected for SND_SOC_QDSP6 Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_QCOM [=y] && QCOM_APR [=n] && COMMON_CLK [=y] Selected by [y]: - SND_SOC_SC8280XP [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_QCOM [=y] && (QCOM_APR [=n] || COMPILE_TEST [=y]) && SOUNDWIRE [=y] && COMMON_CLK [=y] Fixes: 295aeea6646a ("ASoC: qcom: add machine driver for sc8280xp") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220930105347.41127-1-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-09-30KVM: selftests: Compare insn opcodes directly in fix_hypercall_testSean Christopherson
Directly compare the expected versus observed hypercall instructions when verifying that KVM patched in the native hypercall (FIX_HYPERCALL_INSN quirk enabled). gcc rightly complains that doing a 4-byte memcpy() with an "unsigned char" as the source generates an out-of-bounds accesses. Alternatively, "exp" and "obs" could be declared as 3-byte arrays, but there's no known reason to copy locally instead of comparing directly. In function ‘assert_hypercall_insn’, inlined from ‘guest_main’ at x86_64/fix_hypercall_test.c:91:2: x86_64/fix_hypercall_test.c:63:9: error: array subscript ‘unsigned int[0]’ is partly outside array bounds of ‘unsigned char[1]’ [-Werror=array-bounds] 63 | memcpy(&exp, exp_insn, sizeof(exp)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ x86_64/fix_hypercall_test.c: In function ‘guest_main’: x86_64/fix_hypercall_test.c:42:22: note: object ‘vmx_hypercall_insn’ of size 1 42 | extern unsigned char vmx_hypercall_insn; | ^~~~~~~~~~~~~~~~~~ x86_64/fix_hypercall_test.c:25:22: note: object ‘svm_hypercall_insn’ of size 1 25 | extern unsigned char svm_hypercall_insn; | ^~~~~~~~~~~~~~~~~~ In function ‘assert_hypercall_insn’, inlined from ‘guest_main’ at x86_64/fix_hypercall_test.c:91:2: x86_64/fix_hypercall_test.c:64:9: error: array subscript ‘unsigned int[0]’ is partly outside array bounds of ‘unsigned char[1]’ [-Werror=array-bounds] 64 | memcpy(&obs, obs_insn, sizeof(obs)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ x86_64/fix_hypercall_test.c: In function ‘guest_main’: x86_64/fix_hypercall_test.c:25:22: note: object ‘svm_hypercall_insn’ of size 1 25 | extern unsigned char svm_hypercall_insn; | ^~~~~~~~~~~~~~~~~~ x86_64/fix_hypercall_test.c:42:22: note: object ‘vmx_hypercall_insn’ of size 1 42 | extern unsigned char vmx_hypercall_insn; | ^~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors make: *** [../lib.mk:135: tools/testing/selftests/kvm/x86_64/fix_hypercall_test] Error 1 Fixes: 6c2fa8b20d0c ("selftests: KVM: Test KVM_X86_QUIRK_FIX_HYPERCALL_INSN") Cc: Oliver Upton <oliver.upton@linux.dev> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Message-Id: <20220928233652.783504-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-09-30KVM: selftests: Implement memcmp(), memcpy(), and memset() for guest useSean Christopherson
Implement memcmp(), memcpy(), and memset() to override the compiler's built-in versions in order to guarantee that the compiler won't generate out-of-line calls to external functions via the PLT. This allows the helpers to be safely used in guest code, as KVM selftests don't support dynamic loading of guest code. Steal the implementations from the kernel's generic versions, sans the optimizations in memcmp() for unaligned accesses. Put the utilities in a separate compilation unit and build with -ffreestanding to fudge around a gcc "feature" where it will optimize memset(), memcpy(), etc... by generating a recursive call. I.e. the compiler optimizes itself into infinite recursion. Alternatively, the individual functions could be tagged with optimize("no-tree-loop-distribute-patterns"), but using "optimize" for anything but debug is discouraged, and Linus NAK'd the use of the flag in the kernel proper[*]. https://lore.kernel.org/lkml/CAHk-=wik-oXnUpfZ6Hw37uLykc-_P0Apyn2XuX-odh-3Nzop8w@mail.gmail.com Cc: Andrew Jones <andrew.jones@linux.dev> Cc: Anup Patel <anup@brainfault.org> Cc: Atish Patra <atishp@atishpatra.org> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Janosch Frank <frankja@linux.ibm.com> Cc: Claudio Imbrenda <imbrenda@linux.ibm.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220928233652.783504-2-seanjc@google.com> Reviewed-by: Andrew Jones <andrew.jones@linux.dev> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-09-30KVM: x86: Hide IA32_PLATFORM_DCA_CAP[31:0] from the guestJim Mattson
The only thing reported by CPUID.9 is the value of IA32_PLATFORM_DCA_CAP[31:0] in EAX. This MSR doesn't even exist in the guest, since CPUID.1:ECX.DCA[bit 18] is clear in the guest. Clear CPUID.9 in KVM_GET_SUPPORTED_CPUID. Fixes: 24c82e576b78 ("KVM: Sanitize cpuid") Signed-off-by: Jim Mattson <jmattson@google.com> Message-Id: <20220922231854.249383-1-jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-13 12:50:30 +0000