summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-09-08Merge branch 'fixes-for-3.6' of ↵Linus Torvalds
git://git.linaro.org/people/mszyprowski/linux-dma-mapping Pull DMA-mapping fixes from Marek Szyprowski: "Another set of fixes for ARM dma-mapping subsystem. Commit e9da6e9905e6 replaced custom consistent buffer remapping code with generic vmalloc areas. It however introduced some regressions caused by limited support for allocations in atomic context. This series contains fixes for those regressions. For some subplatforms the default, pre-allocated pool for atomic allocations turned out to be too small, so a function for setting its size has been added. Another set of patches adds support for atomic allocations to IOMMU-aware DMA-mapping implementation. The last part of this pull request contains two fixes for Contiguous Memory Allocator, which relax too strict requirements." * 'fixes-for-3.6' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: ARM: dma-mapping: IOMMU allocates pages from atomic_pool with GFP_ATOMIC ARM: dma-mapping: Introduce __atomic_get_pages() for __iommu_get_pages() ARM: dma-mapping: Refactor out to introduce __in_atomic_pool ARM: dma-mapping: atomic_pool with struct page **pages ARM: Kirkwood: increase atomic coherent pool size ARM: DMA-Mapping: print warning when atomic coherent allocation fails ARM: DMA-Mapping: add function for setting coherent pool size from platform code ARM: relax conditions required for enabling Contiguous Memory Allocator mm: cma: fix alignment requirements for contiguous regions
2012-09-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem updates from Dmitry Torokhov. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: wacom - add support for EMR on Cintiq 24HD touch Input: i8042 - add Gigabyte T1005 series netbooks to noloop table Input: imx_keypad - reset the hardware before enabling Input: edt-ft5x06 - fix build error when compiling wthout CONFIG_DEBUG_FS
2012-09-08net: small bug on rxhash calculationChema Gonzalez
In the current rxhash calculation function, while the sorting of the ports/addrs is coherent (you get the same rxhash for packets sharing the same 4-tuple, in both directions), ports and addrs are sorted independently. This implies packets from a connection between the same addresses but crossed ports hash to the same rxhash. For example, traffic between A=S:l and B=L:s is hashed (in both directions) from {L, S, {s, l}}. The same rxhash is obtained for packets between C=S:s and D=L:l. This patch ensures that you either swap both addrs and ports, or you swap none. Traffic between A and B, and traffic between C and D, get their rxhash from different sources ({L, S, {l, s}} for A<->B, and {L, S, {s, l}} for C<->D) The patch is co-written with Eric Dumazet <edumazet@google.com> Signed-off-by: Chema Gonzalez <chema@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-08perf symbols: Remove BIONIC wrapper around libgen.hDavid Ahern
Now that the 2 offenders are fixed, the BIONIC conditional around libgen.h can be removed. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Irina Tirdea <irina.tirdea@gmail.com> Cc: Pekka Enberg <penberg@kernel.org> Link: http://lkml.kernel.org/r/1347116812-93646-4-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-08perf probe: Make a copy of exec path for passing to basenameDavid Ahern
The basename function may modify the string passed to it, so the string should not be marked const. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Irina Tirdea <irina.tirdea@gmail.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1347116812-93646-3-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-08perf annotate: Make a copy of filename for passing to basenameDavid Ahern
The basename function may modify the string passed to it, so the string should not be marked const. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Irina Tirdea <irina.tirdea@gmail.com> Cc: Pekka Enberg <penberg@kernel.org> Link: http://lkml.kernel.org/r/1347116812-93646-2-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-08HID: picoLCD: fix a NULL test in picolcd_raw_cir()Dan Carpenter
Smatch complains that the NULL checking in this function is not consistent and could lead to a NULL dereference. The comments say that we should return here if rc_dev is NULL so I've changed the test to match the comment. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-08drm/i915: initialize dpio_lock spin lockAlexander Shishkin
This thing is killing lockdep. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> [Jani: move the init next to the other spin lock inits] Signed-off-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-08perf gtk/browser: Use perf_hpp__format functionsNamhyung Kim
Now we can support color using pango markup with this change. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1346640790-17197-6-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-08perf hists browser: Use perf_hpp__format functionsNamhyung Kim
Override hpp->color functions for TUI. Because line coloring is done outside of the function, it just sets the percent value and pass it. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1346640790-17197-5-git-send-email-namhyung@kernel.org [ committer note: Keep previous layout by showing the overhead at column 1 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-08perf hists: Use perf_hpp__format->width to calculate the column widthsNamhyung Kim
Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1346640790-17197-4-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-08perf hists: Handle field separator properlyNamhyung Kim
When a field separator is given, the output format doesn't need to be fancy like aligning to column length, coloring the percent value and so on. And since there's a slight difference to normal format, fix it not to break backward compatibility. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1346640790-17197-3-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-08perf hists: Introduce perf_hpp for hist period printingNamhyung Kim
Current hist print functions are messy because it has to consider many of command line options and the code doing that is scattered around to places. So when someone wants to add an option to manipulate the hist output it'd very easy to miss to update all of them in sync. And things getting worse as more options/features are added continuously. So I'd like to refactor them using hpp formats and move common code to ui/hist.c in order to make it easy to maintain and to add new features. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1346640790-17197-2-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-08perf bench: fix assert when NDEBUG is definedIrina Tirdea
When NDEBUG is defined, the assert macro will be expanded to nothing. Some assert calls used in perf are also including some functionality (e.g. system calls), not only validity checks. Therefore, if NDEBUG is defined, this functionality will be removed along with the assert. Perf also defines BUG_ON based on assert, so it has the same problem. Define BUG_ON so that the condition will be executed when NDEBUG is defined. Replace the assert statements that have these side effects with BUG_ON. For defining BUG_ON, use "if (cond) {}" insted of "if (cond) ;" because in the latter case build fails with "error: suggest braces around empty body in an ‘if’ statement [-Werror=empty-body]" Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Pekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347082551-2394-1-git-send-email-irina.tirdea@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-08Merge tag 'perf-core-for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: * Fix build for another rbtree.c change, from Adrian Hunter. * Fixes for perf to build on Android, from Irina Tirdea. * Make 'perf diff' command work with evsel hists, from Jiri Olsa. * Use the only field_sep var that is set up: symbol_conf.field_sep, fix from Jiri Olsa. * .gitignore compiled python binaries, from Namhyung Kim. * Get rid of die() in more libtraceevent places, from Namhyung Kim. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-08iio: isl29018: Support fractional ALS scaling.Bryan Freed
The Industrial IO framework supports scaling ADC values by fractions, but most drivers default to using whole numbers. This change turns on fractional scaling in the isl29018 driver. Signed-off-by: Bryan Freed <bfreed@chromium.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-08staging:iio:adc: Add AD7791 driverLars-Peter Clausen
This patch adds support for the Analog Devices AD7787, AD7788, AD7789, AD7790 and AD7791 Sigma Delta Analog-to-Digital converters. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-08iio:ad5446: Add device ids for ad5301/ad5311/ad5321Lars-Peter Clausen
The ad5301/ad5311/ad5321 are software compatible to the ad5602/ad5612/ad5622. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-08iio:ad5446: Add support for the ad5300/ad5310/ad5320Lars-Peter Clausen
The ad5300/ad5310/ad5320 is a family of single channel DACs with a SPI interface similar to the ad5601/ad5611/ad5621 but use a different shift factor for the data word. While we are at it also reorder the device part numbers in the ad5446 driver Kconfig to be ordered alphabetically. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-08iio: Drop timestamp parameter from buffer store_to callbackLars-Peter Clausen
Drop timestamp parameter from buffer store_to callback and subsequently from iio_push_to_buffer. The timestamp parameter is unused and it seems likely that it will stay unused in the future, so it should be safe to remove it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-07Staging: silicom: C99 cleanup of libbp_sd.hDanielC
Signed-off-by: Daniel Cotey <puff65537@bansheeslibrary.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-07Staging: silicom: C99 cleanup of bypass.hDanielC
Signed-off-by: Daniel Cotey <puff65537@bansheeslibrary.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-07Staging: silicom: C99 cleanup of bp_ioctl.hDanielC
Signed-off-by: Daniel Cotey <puff65537@bansheeslibrary.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-07staging: add Silicom Bypass driverDanielC
The Silicom Bypass Network Interface Cards (NICs) are network cards with paired ports (2 or 4). The pairs either act as a "wire" allowing the network packets to pass or insert the device in between the two ports. When paired with the on-board hardware watchdog or other failsafe, they provide high availability for the network in the face of software outages or maintenance. Signed-off-by: Daniel Cotey <puff65537@bansheeslibrary.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-07staging: vt6655: vt6655_init_info function must be void typeDevendra Naga
this is because it doesn't fail anywhere and returning a value from it will be completely unnecesary. Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-07staging: vt6655: return ENOMEM rather than ENODEV when alloc_etherdev failDevendra Naga
when alloc_etherdev fails we should be returning ENOMEM, not ENODEV Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-07staging: vt6655: fix coding style problem at assigning netdev_opsDevendra Naga
we are using spaces at the beginning of the line, we should use tabs instead Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-07staging: vt6655: fix coding style issues in device_get_optionsDevendra Naga
a) put the device_get_options functions' opening brace below b) replace spaces with tabs Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Acked-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-07staging: vt6655: fix coding style warningsDevendra Naga
a) replace spaces with tabs b) put the opening brace of get_chip_name below it Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Acked-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-07staging: ramster: fix build warningsDan Magenheimer
Fix build warnings resulting from in-progress work that was not entirely ifdef'd out. Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-07staging: tpci200: fix section mismatch warningStephen Hemminger
PCI probe routines have to be named _probe to avoid section mismatch warning. Found when doing 'make allmodconfig' Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-07staging: tidspbridge: move the dereference below the NULL testWei Yongjun
The dereference should be moved below the NULL test. spatch with a semantic match is used to found this. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-07staging: comedi: me4000: convert printk's to dev_printk'sH Hartley Sweeten
A lot of the messages produced by this driver are just noise and need to be removed. For now just convert them all to dev_printk's. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-07staging: comedi: me4000: remove me4000.hH Hartley Sweeten
Move the remaining defines in this header to the c file. Nothing in the header is needed by any other file. While moving the defines, reorder them so that the bit defines are associated with the register they go with. Also, convert the bit defines to bit shifts to make them a bit clearer. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-07staging: comedi: me4000: move struct me4000_info definitionH Hartley Sweeten
Move the struct me4000_info definition from the header to the c file. This struct is not used by any other file. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-07staging: comedi: me4000: remove ME4000_CNT_* definesH Hartley Sweeten
Since this driver is using the 8253.h helpers, these defines are no longer needed. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-07staging: comedi: me4000: cleanup me4000_cnt_insn_config()H Hartley Sweeten
Absorb the cnt_reset and cnt_config helper functions. They are now both just single line routines. Remove the printk noise about "Invalid instruction length". Fix the return value, the value should be the number of data values used to perform the instruction. The GPCT_RESET instruction only has one parameter. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-07staging: comedi: me4000: use the 8253 helper functionsH Hartley Sweeten
The counter subdevice of this board is a standard 8254 compatible counter/timer. Instead of open-coding the 8254 timer io, use the helper functions provided by 8253.h. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-07staging: comedi: me4000: add namespace to reset_board()H Hartley Sweeten
Rename reset_board() to me4000_reset() so it has namespace associated with this driver. Change it's return type to void, it always succeeds. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-07staging: comedi: me4000: fix the interrupt request/freeH Hartley Sweeten
Only set the dev->irq when the request_irq is successful. Use the dev->board_name for the name passed to request_irq. Change the printk messages into dev_warn(). Make sure free_irq is called in the detach. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-07staging: comedi: me4000: combine the checks for valid io addressesH Hartley Sweeten
Combine the sanity checks for valid io addresses into one if(). Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-07staging: comedi: me4000: remove program_regbase from private dataH Hartley Sweeten
The program_regbase variable in the private data is only used when the board is first attached. This variable holds the pci base address used to read/write the xilinx part to upload the firmware. Use a local variable in the xilinx_download() function to hold this address and remove program_regbase from the private data. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-07staging: comedi: me4000: use attach_pci callbackH Hartley Sweeten
Convert this PCI driver to use the comedi PCI auto config attach mechanism by adding an 'attach_pci' callback function. Since the driver does not require any external configuration options, and the legacy 'attach' callback is now optional, remove it. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-07staging: comedi: me4000: cleanup me4000_probe()H Hartley Sweeten
Move the non pci probe related code out of the me4000_probe function and back into the me4000_attach function in preparation of converting this driver to the 'attach_pci' callback. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-07staging: comedi: me4000: store the pci_dev in the comedi_deviceH Hartley Sweeten
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-07staging: comedi: me4000: remove forward declarationsH Hartley Sweeten
Move some of the functions to avoid the need for the forward declarations. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-07staging: comedi: me4000: remove me4000_ao_rangeH Hartley Sweeten
Use range_bipolar10, which is exported by the comedi core, instead of creating a local symbol for an identical range. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-07staging: comedi: me4000: remove info macroH Hartley Sweeten
This macro relies on a local variable having a specific name. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-07staging: comedi: me4000: absorb init_board_info() into its callerH Hartley Sweeten
The init_board_info() function only gets the irq number from the pci_dev. Just move the code into the function that calls it. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-07staging: comedi: me4000: use dev->irq to save the irq numberH Hartley Sweeten
Use the irq variable provided in the comedi_device to save the irq number and remove it from the private data. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-23 03:33:53 +0000