| Age | Commit message (Collapse) | Author |
|---|
|
This is another patch in the series adding all the ops
for the new MLD ieee80211_ops.
The callbacks added here use the new MLD FW API
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230320122330.42b0d4726b8d.I0755baace47c0ab1d9d70137448125d3140ef3af@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This is another patch in the series adding all the ops
for the new MLD ieee80211_ops.
The callbacks added here use the new MLD FW API
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230320122330.3eb485c359fc.I28be198ea9389083d5a01f68c92763722613ba9b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
iwl_mvm_get_sync_time() reads the gp2 from the device and then
reads the system clock. Since the two reads are not done atomically,
unexpected delays may happen between the two reads (e.g. context
switch) which make it inaccurate.
In order to improve the accuracy of the cross timestamp, call
iwl_mvm_get_sync_time() multiple times in a loop and take the
result in which the difference between the two clock is the smallest.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230320122330.d9e6f8f8998a.I569939ec4ddf0c6c64c112e7d0c30583f5509d9a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Implement the following PHC operations:
1. adjtime - for adding an offset to the PHC clock time.
2. adjfine - for adjusting the PHC clock frequency.
3. gettime64 - for getting the PHC clock time. This function returns
the time as adjusted by adjtime and adjfine.
The adjusted time will also be used for time sync frames timestamping.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230320122330.f59750deeee4.I110a7e3ac3c6d39d9dbe1fe77001e3f5bc3814eb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Check hardware/firmware support and enable TX beacon protection
as well if supported, programming the key into the firmware as
usual.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230320122330.6a90a4f4f469.Ia028dea75f9a8eed40786d876d51f97fb3142688@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add support for timing measurement in extended capabilities, used for
time synchronization.
Signed-off-by: Krishnanand Prabhu <krishnanand.prabhu@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230320122330.001d2b459ece.I15ab8fc214edc35f1f362006a9e1a22b89e7ed8e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
For TM/FTM frames, report the hardware timestamps reported by the
fw as part of the RX/TX status. Since the fw reports the timestamps
in a dedicated notification (and not as part of the RX/TX status),
hold the frame until the fw timestamps notification is received.
Timestamping is enabled when a station is connected and disabled
when disconnected. For AP interface, only the first station will
have timestamping enabled since the fw only supports timestamping
for one peer.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230320122330.e0392d498101.I9bf12c8ecfb3f17253a13dc48a48647ddd6e7855@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If the firmware supports reading synced GP2/ATRB timestamps,
read the synced timestamps from firmware instead of reading the
GP2 register and the system time separately. Reading the synced
time from firmware should be more accurate.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230320122330.a6be5f0b5580.Idedb496a5943fa496143066ffbed08185a8c4582@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add support to enable/disable PHC clock. The PHC clock includes support
for fetching the cross timestamp i.e. a non-atomic snapshot of the current
time from the hardware (WiFi device) clock and system clock (wall-clock)
simultaneously.
Signed-off-by: Krishnanand Prabhu <krishnanand.prabhu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230320122330.ae1d64f513b9.Ib3b6ad61c9fa2fc5908f1e0d6f59f4af6eec1a77@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Some recent upstream debugging uncovered the fact that in
iwlwifi, the TXQ list manipulation is racy.
Introduce a new state bit for when the TXQ is completely
ready and can be used without locking, and if that's not
set yet acquire the lock to check everything correctly.
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Tested-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This could race if the queue is redirected while full, then
the flushing internally would start it while it's not yet
usable again. Fix it by using two state bits instead of just
one.
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Tested-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When the CPTS clock is synced/adjusted by running linuxptp (ptp4l/phc2sys),
it will cause the TSN EST schedule to drift away over time. This is because
the schedule is driven by the EstF periodic counter whose pulse length is
defined in ref_clk cycles and it does not automatically sync to CPTS clock.
_______
_|
^
expected cycle start time boundary
_______________
_|_|___|_|
^
EstF drifted away -> direction
To fix it, the same PPM adjustment has to be applied to EstF as done to the
PHC CPTS clock, in order to correct the TSN EST cycle length and keep them
in sync.
Drifted cycle:
AM65_CPTS_EVT: 7 e1:01770001 e2:000000ff t:1635968230373377017
AM65_CPTS_EVT: 7 e1:01770001 e2:000000ff t:1635968230373877017
AM65_CPTS_EVT: 7 e1:01770001 e2:000000ff t:1635968230374377017
AM65_CPTS_EVT: 7 e1:01770001 e2:000000ff t:1635968230374877017
AM65_CPTS_EVT: 7 e1:01770001 e2:000000ff t:1635968230375377017
AM65_CPTS_EVT: 7 e1:01770001 e2:000000ff t:1635968230375877023
AM65_CPTS_EVT: 7 e1:01770001 e2:000000ff t:1635968230376377018
AM65_CPTS_EVT: 7 e1:01770001 e2:000000ff t:1635968230376877018
AM65_CPTS_EVT: 7 e1:01770001 e2:000000ff t:1635968230377377018
Stable cycle:
AM65_CPTS_EVT: 7 e1:01770001 e2:000000ff t:1635966863193375473
AM65_CPTS_EVT: 7 e1:01770001 e2:000000ff t:1635966863193875473
AM65_CPTS_EVT: 7 e1:01770001 e2:000000ff t:1635966863194375473
AM65_CPTS_EVT: 7 e1:01770001 e2:000000ff t:1635966863194875473
AM65_CPTS_EVT: 7 e1:01770001 e2:000000ff t:1635966863195375473
AM65_CPTS_EVT: 7 e1:01770001 e2:000000ff t:1635966863195875473
AM65_CPTS_EVT: 7 e1:01770001 e2:000000ff t:1635966863196375473
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/20230321062600.2539544-1-s-vadapalli@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
sh/migor_defconfig:
mm/slab.c: In function ‘slab_memory_callback’:
mm/slab.c:1127:23: error: implicit declaration of function ‘init_cache_node_node’; did you mean ‘drain_cache_node_node’? [-Werror=implicit-function-declaration]
1127 | ret = init_cache_node_node(nid);
| ^~~~~~~~~~~~~~~~~~~~
| drain_cache_node_node
The #ifdef condition protecting the definition of init_cache_node_node()
no longer matches the conditions protecting the (multiple) users.
Fix this by syncing the conditions.
Fixes: 76af6a054da40553 ("mm/migrate: add CPU hotplug to demotion #ifdef")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/b5bdea22-ed2f-3187-6efe-0c72330270a4@infradead.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Sometimes we need to know which one of backlog queue can be exactly
long enough to cause some latency when debugging this part is needed.
Thus, we can then separate the display of both.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230321015746.96994-1-kerneljasonxing@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Pointer to transport could be checked before allocation of skbuff, thus
there is no need to free skbuff when this pointer is NULL.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/08d61bef-0c11-c7f9-9266-cb2109070314@sberdevices.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The FEI field of C2HTermReq/H2CTermReq is 4 bytes but not 4-byte-aligned
in the NVMe/TCP specification (it is located at offset 10 in the PDU).
Split it into two 16-bit integers in struct nvme_tcp_term_pdu
so no padding is inserted. There should also be 10 reserved bytes after.
There are currently no users of this type.
Fixes: fc221d05447aa6db ("nvme-tcp: Add protocol header")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Caleb Sander <csander@purestorage.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Identify CNS 06h (I/O Command Set Specific Identify Controller data
structure) is supported only on i/o controllers.
But nvme_init_non_mdts_limits() currently invokes this on all
controllers. Correct this by ensuring this is sent to I/O
controllers only.
Signed-off-by: Martin George <marting@netapp.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Explicit alignment and page alignment are used only to calculate
the stride, not when checking actual slot physical address.
Originally, only page alignment was implemented, and that worked,
because the whole SWIOTLB is allocated on a page boundary, so
aligning the start index was sufficient to ensure a page-aligned
slot.
When commit 1f221a0d0dbf ("swiotlb: respect min_align_mask") added
support for min_align_mask, the index could be incremented in the
search loop, potentially finding an unaligned slot if minimum device
alignment is between IO_TLB_SIZE and PAGE_SIZE. The bug could go
unnoticed, because the slot size is 2 KiB, and the most common page
size is 4 KiB, so there is no alignment value in between.
IIUC the intention has been to find a slot that conforms to all
alignment constraints: device minimum alignment, an explicit
alignment (given as function parameter) and optionally page
alignment (if allocation size is >= PAGE_SIZE). The most
restrictive mask can be trivially computed with logical AND. The
rest can stay.
Fixes: 1f221a0d0dbf ("swiotlb: respect min_align_mask")
Fixes: e81e99bacc9f ("swiotlb: Support aligned swiotlb buffers")
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
No functional change, just use an existing helper.
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Jiri suggests it reads more naturally to skip the explicit
array size when possible. When we export the symbol we want
to make sure that the size is right but for statics its
not needed.
Link: https://lore.kernel.org/r/20230321044159.1031040-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Eric Dumazet says:
====================
net: remove some rcu_bh cruft
There is no point using rcu_bh variant hoping to free objects faster,
especially hen using call_rcu() or kfree_rcu().
Disabling/enabling BH has a non-zero cost, and adds distracting
hot spots in kernel profiles eg. in ip6_xmit().
====================
Link: https://lore.kernel.org/r/20230321040115.787497-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This helper is no longer used in the tree.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
rcu_bh is no longer a win, especially for objects freed
with standard call_rcu().
Switch neighbour code to no longer disable BH when not necessary.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
struct ip6_flowlabel are rcu managed, and call_rcu() is used
to delay fl_free_rcu() after RCU grace period.
There is no point disabling BH for pure RCU lookups.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The DMA address returned by dma_map_single() should be checked with
dma_mapping_error(). Fix it accordingly.
Fixes: efcce839360f ("[PATCH] macsonic/jazzsonic network drivers update")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/6645a4b5c1e364312103f48b7b36783b94e197a2.1679370343.git.fthain@linux-m68k.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Vladimir Oltean says:
====================
Fix trainwreck with Ocelot switch statistics counters
While testing the patch set for preemptible traffic classes with some
controlled traffic and measuring counter deltas:
https://lore.kernel.org/netdev/20230220122343.1156614-1-vladimir.oltean@nxp.com/
I noticed that in the output of "ethtool -S swp0 --groups eth-mac
eth-phy eth-ctrl rmon -- --src emac | grep -v ': 0'", the TX counters
were off. Quickly I realized that their values were permutated by 1
compared to their names, and that for example
tx-rmon-etherStatsPkts64to64Octets was incrementing when
tx-rmon-etherStatsPkts65to127Octets should have.
Initially I suspected something having to do with the bulk reading
logic, and indeed I found a bug there (fixed as 1/3), but that was not
the source of the problems. Instead it revealed other problems.
While dumping the regions created by the driver on my switch, I figured
out that it sees a discontinuity which shouldn't have existed between
reg 0x278 and reg 0x280.
Discontinuity between last reg 0x0 and new reg 0x0, creating new region
Discontinuity between last reg 0x108 and new reg 0x200, creating new region
Discontinuity between last reg 0x278 and new reg 0x280, creating new region
Discontinuity between last reg 0x2b0 and new reg 0x400, creating new region
region of 67 contiguous counters starting with SYS:STAT:CNT[0x000]
region of 31 contiguous counters starting with SYS:STAT:CNT[0x080]
region of 13 contiguous counters starting with SYS:STAT:CNT[0x0a0]
region of 18 contiguous counters starting with SYS:STAT:CNT[0x100]
That is where TX_MM_HOLD should have been, and that was the bug, since
it was missing. After adding it, the regions look like this and the
off-by-one issue is resolved:
Discontinuity between last reg 0x000000 and new reg 0x000000, creating new region
Discontinuity between last reg 0x000108 and new reg 0x000200, creating new region
Discontinuity between last reg 0x0002b0 and new reg 0x000400, creating new region
region of 67 contiguous counters starting with SYS:STAT:CNT[0x000]
region of 45 contiguous counters starting with SYS:STAT:CNT[0x080]
region of 18 contiguous counters starting with SYS:STAT:CNT[0x100]
However, as I am thinking out loud, it should have not reported the
other counters as off by one even when skipping TX_MM_HOLD... after all,
on Ocelot/Seville, there are more counters which need to be skipped.
Which is when I investigated and noticed the bug solved in 2/3.
I've validated that both on native VSC9959 (which uses
ocelot_mm_stats_layout) as well as by faking the other switches by
making VSC9959 use the plain ocelot_stats_layout.
To summarize: on all Ocelot switches, the TX counters and drop counters
are completely broken. The RX counters are mostly fine.
With this occasion, I have collected more cleanup patches in this area,
which I'm going to submit after the net -> net-next merge.
====================
Link: https://lore.kernel.org/r/20230321010325.897817-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The lack of a definition for this counter is what initially prompted me
to investigate a problem which really manifested itself as the previous
change, "net: mscc: ocelot: fix transfer from region->buf to ocelot->stats".
When TX_MM_HOLD is defined in enum ocelot_stat but not in struct
ocelot_stat_layout ocelot_mm_stats_layout, this creates a hole, which
due to the aforementioned bug, makes all counters following TX_MM_HOLD
be recorded off by one compared to their correct position. So for
example, a non-zero TX_PMAC_OCTETS would be reported as TX_MERGE_FRAGMENTS,
TX_PMAC_UNICAST would be reported as TX_PMAC_OCTETS, TX_PMAC_64 would be
reported as TX_PMAC_PAUSE, etc etc. This is because the size of the hole
(1) is much smaller than the size of the region, so the phenomenon where
the stats are off-by-one, rather than lost, prevails.
However, the phenomenon where stats are lost can be seen too, for
example with DROP_LOCAL, which is at the beginning of its own region
(offset 0x000400 vs the previous 0x0002b0 constitutes a discontinuity).
This is also reported as off by one and saved to TX_PMAC_1527_MAX, but
that counter is not reported to the unstructured "ethtool -S", as
opposed to DROP_LOCAL which is (as "drop_local").
Fixes: ab3f97a9610a ("net: mscc: ocelot: export ethtool MAC Merge stats for Felix VSC9959")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To understand the problem, we need some definitions.
The driver is aware of multiple counters (enum ocelot_stat), yet not all
switches supported by the driver implement all counters. There are 2
statistics layouts: ocelot_stats_layout and ocelot_mm_stats_layout, the
latter having 36 counters more than the former.
ocelot->stats[] is not a compact array, i.e. there are elements within
it which are not going to be populated for ocelot_stats_layout. On the
other hand, ocelot->stats[] is easily indexable, for example "tx_octets"
for port 3 can be found at ocelot->stats[3 * OCELOT_NUM_STATS +
OCELOT_STAT_TX_OCTETS], and that is why we keep it sparse.
Regions, as created by ocelot_prepare_stats_regions(), are compact
(every element from region->buf will correspond to a counter that is
present in this switch's layout) but are not easily indexable.
Let's define holes as the ranges of values of enum ocelot_stat for which
ocelot_stats_layout doesn't have a "reg" defined. For example, there is
a hole between OCELOT_STAT_RX_GREEN_PRIO_7 and OCELOT_STAT_TX_OCTETS
which is of 23 elements that are only present on ocelot_mm_stats_layout,
and as such, they are also present in enum ocelot_stat. Let's define the
left extremity of the hole - the last enum ocelot_stat still defined -
as A (in this case OCELOT_STAT_RX_GREEN_PRIO_7) and the right extremity -
the first enum ocelot_stat that is defined after a series of undefined
ones - as B (in this case OCELOT_STAT_TX_OCTETS).
There is a bug in the procedure which transfers stats from region->buf[]
to ocelot->stats[].
For each hole in the ocelot_stats_layout, the logic transfers the stats
starting with enum ocelot_stat B to ocelot->stats[] index A + 1. So all
stats after a hole are saved to a position which is off by B - A + 1
elements.
This causes 2 kinds of issues:
(a) counters which shouldn't increment increment
(b) counters which should increment don't
Holes in the ocelot_stat_layout automatically imply the end of a region
and the beginning of a new one; however the reverse is not necessarily
true. For example, for ocelot_mm_stat_layout, there could be multiple
regions (which indicate discontinuities in register addresses) while
there is no hole (which indicates discontinuities in enum ocelot_stat
values).
In the example above, the stats from the second region->buf[] are not
transferred to ocelot->stats starting with index
"port * OCELOT_NUM_STATS + OCELOT_STAT_TX_OCTETS" as they should, but
rather, starting with element
"port * OCELOT_NUM_STATS + OCELOT_STAT_RX_GREEN_PRIO_7 + 1".
That stats[] array element is not reported to user space for switches
that use ocelot_stat_layout, and that is how issue (b) occurs.
However, if the length of the second region is larger than the hole,
then some stats will start to be transferred to the ocelot->stats[]
indices which *are* reported to user space, but those indices contain
wrong values (corresponding to unexpected counters). This is how issue
(a) occurs.
The procedure, as it was introduced in commit d87b1c08f38a ("net: mscc:
ocelot: use bulk reads for stats"), was not buggy, because there were no
holes in the struct ocelot_stat_layout instances at that time. The
problem is that when those holes were introduced, the function was not
updated to take them into consideration.
To update the procedure, we need to know, for each region, which enum
ocelot_stat corresponds to its region->base. We have no way of deducing
that based on the contents of struct ocelot_stats_region, so we need to
add this information.
Fixes: ab3f97a9610a ("net: mscc: ocelot: export ethtool MAC Merge stats for Felix VSC9959")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The blamed commit changed struct ocelot_stat_layout :: "u32 offset" to
"u32 reg".
However, "u32 reg" is not quite a register address, but an enum
ocelot_reg, which in itself encodes an enum ocelot_target target in the
upper bits, and an index into the ocelot->map[target][] array in the
lower bits.
So, whereas the previous code comparison between stats_layout[i].offset
and last + 1 was correct (because those "offsets" at the time were
32-bit relative addresses), the new code, comparing layout[i].reg to
last + 4 is not correct, because the "reg" here is an enum/index, not an
actual register address.
What we want to compare are indeed register addresses, but to do that,
we need to actually go through the same motions as
__ocelot_bulk_read_ix() itself.
With this bug, all statistics counters are deemed by
ocelot_prepare_stats_regions() as constituting their own region.
(Truncated) log on VSC9959 (Felix) below (prints added by me):
Before:
region of 1 contiguous counters starting with SYS:STAT:CNT[0x000]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x001]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x002]
...
region of 1 contiguous counters starting with SYS:STAT:CNT[0x041]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x042]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x080]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x081]
...
region of 1 contiguous counters starting with SYS:STAT:CNT[0x0ac]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x100]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x101]
...
region of 1 contiguous counters starting with SYS:STAT:CNT[0x111]
After:
region of 67 contiguous counters starting with SYS:STAT:CNT[0x000]
region of 45 contiguous counters starting with SYS:STAT:CNT[0x080]
region of 18 contiguous counters starting with SYS:STAT:CNT[0x100]
Since commit d87b1c08f38a ("net: mscc: ocelot: use bulk reads for
stats") intended bulking as a performance improvement, and since now,
with trivial-sized regions, performance is even worse than without
bulking at all, this could easily qualify as a performance regression.
Fixes: d4c367650704 ("net: mscc: ocelot: keep ocelot_stat_layout by reg address, not offset")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Colin Foster <colin.foster@in-advantage.com>
Tested-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
clang with W=1 reports
drivers/net/ethernet/atheros/atl1c/atl1c_main.c:214:20: error:
unused function 'atl1c_irq_reset' [-Werror,-Wunused-function]
static inline void atl1c_irq_reset(struct atl1c_adapter *adapter)
^
This function is not used, so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/20230320232317.1729464-1-trix@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Drivers should not assume skb_mac_header(skb) == skb->data in their
ndo_start_xmit().
Use skb_network_offset() and skb_transport_offset() which
better describe what is needed in erspan_fb_xmit() and
ip6erspan_tunnel_xmit()
syzbot reported:
WARNING: CPU: 0 PID: 5083 at include/linux/skbuff.h:2873 skb_mac_header include/linux/skbuff.h:2873 [inline]
WARNING: CPU: 0 PID: 5083 at include/linux/skbuff.h:2873 ip6erspan_tunnel_xmit+0x1d9c/0x2d90 net/ipv6/ip6_gre.c:962
Modules linked in:
CPU: 0 PID: 5083 Comm: syz-executor406 Not tainted 6.3.0-rc2-syzkaller-00866-gd4671cb96fa3 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023
RIP: 0010:skb_mac_header include/linux/skbuff.h:2873 [inline]
RIP: 0010:ip6erspan_tunnel_xmit+0x1d9c/0x2d90 net/ipv6/ip6_gre.c:962
Code: 04 02 41 01 de 84 c0 74 08 3c 03 0f 8e 1c 0a 00 00 45 89 b4 24 c8 00 00 00 c6 85 77 fe ff ff 01 e9 33 e7 ff ff e8 b4 27 a1 f8 <0f> 0b e9 b6 e7 ff ff e8 a8 27 a1 f8 49 8d bf f0 0c 00 00 48 b8 00
RSP: 0018:ffffc90003b2f830 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 000000000000ffff RCX: 0000000000000000
RDX: ffff888021273a80 RSI: ffffffff88e1bd4c RDI: 0000000000000003
RBP: ffffc90003b2f9d8 R08: 0000000000000003 R09: 000000000000ffff
R10: 000000000000ffff R11: 0000000000000000 R12: ffff88802b28da00
R13: 00000000000000d0 R14: ffff88807e25b6d0 R15: ffff888023408000
FS: 0000555556a61300(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055e5b11eb6e8 CR3: 0000000027c1b000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__netdev_start_xmit include/linux/netdevice.h:4900 [inline]
netdev_start_xmit include/linux/netdevice.h:4914 [inline]
__dev_direct_xmit+0x504/0x730 net/core/dev.c:4300
dev_direct_xmit include/linux/netdevice.h:3088 [inline]
packet_xmit+0x20a/0x390 net/packet/af_packet.c:285
packet_snd net/packet/af_packet.c:3075 [inline]
packet_sendmsg+0x31a0/0x5150 net/packet/af_packet.c:3107
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg+0xde/0x190 net/socket.c:747
__sys_sendto+0x23a/0x340 net/socket.c:2142
__do_sys_sendto net/socket.c:2154 [inline]
__se_sys_sendto net/socket.c:2150 [inline]
__x64_sys_sendto+0xe1/0x1b0 net/socket.c:2150
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f123aaa1039
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 b1 14 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffc15d12058 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f123aaa1039
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000020000040 R09: 0000000000000014
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f123aa648c0
R13: 431bde82d7b634db R14: 0000000000000000 R15: 0000000000000000
Fixes: 1baf5ebf8954 ("erspan: auto detect truncated packets.")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230320163427.8096-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are memory leaks reported by kmemleak:
unreferenced object 0xffff888106500800 (size 128):
comm "modprobe", pid 1017, jiffies 4297787785 (age 67.152s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000970ce626>] __kmem_cache_alloc_node+0x20c/0x380
[<00000000fb5f78d9>] kmalloc_trace+0x2f/0xb0
[<000000000e947e2a>] idt77252_init_one+0x2847/0x3c90 [idt77252]
[<000000006efb048e>] local_pci_probe+0xeb/0x1a0
...
unreferenced object 0xffff888106500b00 (size 128):
comm "modprobe", pid 1017, jiffies 4297787785 (age 67.152s)
hex dump (first 32 bytes):
00 20 3d 01 80 88 ff ff 00 20 3d 01 80 88 ff ff . =...... =.....
f0 23 3d 01 80 88 ff ff 00 20 3d 01 00 00 00 00 .#=...... =.....
backtrace:
[<00000000970ce626>] __kmem_cache_alloc_node+0x20c/0x380
[<00000000fb5f78d9>] kmalloc_trace+0x2f/0xb0
[<00000000f451c5be>] alloc_scq.constprop.0+0x4a/0x400 [idt77252]
[<00000000e6313849>] idt77252_init_one+0x28cf/0x3c90 [idt77252]
The root cause is traced to the vc_maps which alloced in open_card_oam()
are not freed in close_card_oam(). The vc_maps are used to record
open connections, so when close a vc_map in close_card_oam(), the memory
should be freed. Moreover, the ubr0 is not closed when close a idt77252
device, leading to the memory leak of vc_map and scq_info.
Fix them by adding kfree in close_card_oam() and implementing new
close_card_ubr0() to close ubr0.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Francois Romieu <romieu@fr.zoreil.com>
Link: https://lore.kernel.org/r/20230320143318.2644630-1-lizetao1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix voltage scaling for chips that have 10.9mV ADCs, where scaling was
not performed.
Fixes: ead8080351c9 ("hwmon: (it87) Add support for IT8732F")
Signed-off-by: Frank Crawford <frank@crawford.emu.id.au>
Link: https://lore.kernel.org/r/20230318080543.1226700-2-frank@crawford.emu.id.au
[groeck: Update subject and description to focus on bug fix]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
As a result of the switch to dh_listpackages, $version is no longer set
when install_kernel_headers() is called. This causes files in the
linux-headers deb package to be installed to a path with an empty
$version (e.g. /usr/src/linux-headers-/scripts/sign-file rather than
/usr/src/linux-headers-6.3.0-rc3/scripts/sign-file).
To avoid this, while continuing to use the version information from
dh_listpackages, pass $version from $package as the second argument
of install_kernel_headers().
Fixes: 36862e14e316 ("kbuild: deb-pkg: use dh_listpackages to know enabled packages")
Signed-off-by: Kevin Locke <kevin@kevinlocke.name>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
When BCM63xx internal switches are connected to switches with a 4-byte
Broadcom tag, it does not identify the packet as VLAN tagged, so it adds one
based on its PVID (which is likely 0).
Right now, the packet is received by the BCM63xx internal switch and the 6-byte
tag is properly processed. The next step would to decode the corresponding
4-byte tag. However, the internal switch adds an invalid VLAN tag after the
6-byte tag and the 4-byte tag handling fails.
In order to fix this we need to remove the invalid VLAN tag after the 6-byte
tag before passing it to the 4-byte tag decoding.
Fixes: 964dbf186eaa ("net: dsa: tag_brcm: add support for legacy tags")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230319095540.239064-1-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, we pass the CONTEXTID instead of the ASID to the TLB flush
function. We should only take the ASID field to prevent from touching
the reserved bit field.
Fixes: 3f1e782998cd ("riscv: add ASID-based tlbflushing methods")
Signed-off-by: Dylan Jhong <dylan@andestech.com>
Reviewed-by: Sergey Matyukevich <sergey.matyukevich@syntacore.com>
Link: https://lore.kernel.org/r/20230313034906.2401730-1-dylan@andestech.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Pull VFIO fix from Alex Williamson:
- Fix dirty size reporting for pre-copy in mlx5 variant driver (Yishai
Hadas)
* tag 'vfio-v6.3-rc4' of https://github.com/awilliam/linux-vfio:
vfio/mlx5: Fix the report of dirty_bytes upon pre-copy
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Fix a crash during NFS READs from certain client implementations
- Address a minor kbuild regression in v6.3
* tag 'nfsd-6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: don't replace page in rq_pages if it's a continuation of last page
NFS & NFSD: Update GSS dependencies
|
|
The error handling dereferences "vport". There is nothing we can do if
it is an error pointer except returning the error code.
Fixes: 133dcfc577ea ("net/mlx5: E-Switch, Alloc and free unique metadata for match")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When ETS configurations are queried by the user to get the mapping
assignment between packet priority and traffic class, only priorities up
to maximum TCs are queried from QTCT register in FW to retrieve their
assigned TC, leaving the rest of the priorities mapped to the default
TC #0 which might be misleading.
Fix by querying the TC mapping of all priorities on each ETS query,
regardless of the maximum number of TCs configured in FW.
Fixes: 820c2c5e773d ("net/mlx5e: Read ETS settings directly from firmware")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
First ASO WQE poll causes a cache miss in hardware hence the resut is
delayed. It causes to the situation where such WQE is polled earlier
than it is needed.
Add logic to retry ASO CQ polling operation.
Fixes: 739cfa34518e ("net/mlx5: Make ASO poll CQ usable in atomic context")
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
mlx5e_port_max_linkspeed does not guarantee value assignment for speed.
Avoid cases where link_speed might be used uninitialized. In case
mlx5e_port_max_linkspeed fails, a default link speed of 50000 will be
used for the calculations.
Fixes: 3f6d08d196b2 ("net/mlx5e: Add RSS support for hairpin")
Signed-off-by: Roy Novich <royno@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
vport's mc, uc and multicast rules are not deleted in teardown path when
EEH happens. Since the vport's promisc settings(uc, mc and all) in
firmware are reset after EEH, mlx5 driver will try to delete the above
rules in the initialization path. This cause kernel crash because these
software rules are no longer valid.
Fix by nullifying these rules right after delete to avoid accessing any dangling
pointers.
Call Trace:
__list_del_entry_valid+0xcc/0x100 (unreliable)
tree_put_node+0xf4/0x1b0 [mlx5_core]
tree_remove_node+0x30/0x70 [mlx5_core]
mlx5_del_flow_rules+0x14c/0x1f0 [mlx5_core]
esw_apply_vport_rx_mode+0x10c/0x200 [mlx5_core]
esw_update_vport_rx_mode+0xb4/0x180 [mlx5_core]
esw_vport_change_handle_locked+0x1ec/0x230 [mlx5_core]
esw_enable_vport+0x130/0x260 [mlx5_core]
mlx5_eswitch_enable_sriov+0x2a0/0x2f0 [mlx5_core]
mlx5_device_enable_sriov+0x74/0x440 [mlx5_core]
mlx5_load_one+0x114c/0x1550 [mlx5_core]
mlx5_pci_resume+0x68/0xf0 [mlx5_core]
eeh_report_resume+0x1a4/0x230
eeh_pe_dev_traverse+0x98/0x170
eeh_handle_normal_event+0x3e4/0x640
eeh_handle_event+0x4c/0x370
eeh_event_handler+0x14c/0x210
kthread+0x168/0x1b0
ret_from_kernel_thread+0x5c/0x84
Fixes: a35f71f27a61 ("net/mlx5: E-Switch, Implement promiscuous rx modes vf request handling")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Upon entering switchdev mode, VF/SF representors are spawned in the
devlink instance's net namespace, whereas the PF net device transforms
into the uplink representor, remaining in the net namespace the PF net
device was in. Therefore, if a PF net device's namespace is different from
its parent devlink net namespace, entering switchdev mode can create an
illegal situation where all representors sharing the same core device
are NOT in the same net namespace.
To avoid this issue, block entering switchdev mode for devices whose child
netdev net namespace has diverged from the parent devlink's.
Fixes: 7768d1971de6 ("net/mlx5: E-Switch, Add control for encapsulation")
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Gavi Teitz <gavi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Previously, NETNS_LOCAL was not set for uplink representors, inconsistent
with VF representors, and allowed the uplink representor to be moved
between net namespaces and separated from the VF representors it shares
the core device with. Such usage would break the isolation model of
namespaces, as devices in different namespaces would have access to
shared memory.
To solve this issue, set NETNS_LOCAL for uplink representors if eswitch is
in switchdev mode.
Fixes: 7a9fb35e8c3a ("net/mlx5e: Do not reload ethernet ports when changing eswitch mode")
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Gavi Teitz <gavi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
We've seen recent AWS EKS (Kubernetes) user reports like the following:
After upgrading EKS nodes from v20230203 to v20230217 on our 1.24 EKS
clusters after a few days a number of the nodes have containers stuck
in ContainerCreating state or liveness/readiness probes reporting the
following error:
Readiness probe errored: rpc error: code = Unknown desc = failed to
exec in container: failed to start exec "4a11039f730203ffc003b7[...]":
OCI runtime exec failed: exec failed: unable to start container process:
unable to init seccomp: error loading seccomp filter into kernel:
error loading seccomp filter: errno 524: unknown
However, we had not been seeing this issue on previous AMIs and it only
started to occur on v20230217 (following the upgrade from kernel 5.4 to
5.10) with no other changes to the underlying cluster or workloads.
We tried the suggestions from that issue (sysctl net.core.bpf_jit_limit=452534528)
which helped to immediately allow containers to be created and probes to
execute but after approximately a day the issue returned and the value
returned by cat /proc/vmallocinfo | grep bpf_jit | awk '{s+=$2} END {print s}'
was steadily increasing.
I tested bpf tree to observe bpf_jit_charge_modmem, bpf_jit_uncharge_modmem
their sizes passed in as well as bpf_jit_current under tcpdump BPF filter,
seccomp BPF and native (e)BPF programs, and the behavior all looks sane
and expected, that is nothing "leaking" from an upstream perspective.
The bpf_jit_limit knob was originally added in order to avoid a situation
where unprivileged applications loading BPF programs (e.g. seccomp BPF
policies) consuming all the module memory space via BPF JIT such that loading
of kernel modules would be prevented. The default limit was defined back in
2018 and while good enough back then, we are generally seeing far more BPF
consumers today.
Adjust the limit for the BPF JIT pool from originally 1/4 to now 1/2 of the
module memory space to better reflect today's needs and avoid more users
running into potentially hard to debug issues.
Fixes: fdadd04931c2 ("bpf: fix bpf_jit_limit knob for PAGE_SIZE >= 64K")
Reported-by: Stephen Haynes <sh@synk.net>
Reported-by: Lefteris Alexakis <lefteris.alexakis@kpn.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://github.com/awslabs/amazon-eks-ami/issues/1179
Link: https://github.com/awslabs/amazon-eks-ami/issues/1219
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230320143725.8394-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The CDAT exposed in sysfs differs between little endian and big endian
arches: On big endian, every 4 bytes are byte-swapped.
PCI Configuration Space is little endian (PCI r3.0 sec 6.1). Accessors
such as pci_read_config_dword() implicitly swap bytes on big endian.
That way, the macros in include/uapi/linux/pci_regs.h work regardless of
the arch's endianness. For an example of implicit byte-swapping, see
ppc4xx_pciex_read_config(), which calls in_le32(), which uses lwbrx
(Load Word Byte-Reverse Indexed).
DOE Read/Write Data Mailbox Registers are unlike other registers in
Configuration Space in that they contain or receive a 4 byte portion of
an opaque byte stream (a "Data Object" per PCIe r6.0 sec 7.9.24.5f).
They need to be copied to or from the request/response buffer verbatim.
So amend pci_doe_send_req() and pci_doe_recv_resp() to undo the implicit
byte-swapping.
The CXL_DOE_TABLE_ACCESS_* and PCI_DOE_DATA_OBJECT_DISC_* macros assume
implicit byte-swapping. Byte-swap requests after constructing them with
those macros and byte-swap responses before parsing them.
Change the request and response type to __le32 to avoid sparse warnings.
Per a request from Jonathan, replace sizeof(u32) with sizeof(__le32) for
consistency.
Fixes: c97006046c79 ("cxl/port: Read CDAT table")
Tested-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: stable@vger.kernel.org # v6.0+
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/3051114102f41d19df3debbee123129118fc5e6d.1678543498.git.lukas@wunner.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull keyrings fixes from David Howells:
- Fix request_key() so that it doesn't cache a looked up key on the
current thread if that thread is a kernel thread.
The cache is cleared during notify_resume - but that doesn't happen
in kernel threads. This is causing cifs DNS keys to be
un-invalidateable.
- Fix a wrapper check in verify_pefile() to not round up the length.
- Change asymmetric_keys code to log errors to make it easier for users
to work out why failures occurred.
* tag 'keys-fixes-20230321' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
asymmetric_keys: log on fatal failures in PE/pkcs7
verify_pefile: relax wrapper length check
keys: Do not cache key in task struct if key is requested from kernel thread
|
|
DMA coalescing is not applicable for i225 parts. This patch comes to tidy
up the driver code.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
There was a problem with resuming ping after conducting a PCI reset.
This commit adds two functions, igbvf_io_prepare and igbvf_io_done,
which, after being added to the pci_error_handlers struct,
will prepare the drivers for a PCI reset and then bring the interface up
and reset it after. This will prevent the driver from ending up in
incorrect state. Test_and_set_bit is highly reliable in this context,
so we are not including a timeout in this commit
This introduces 900ms - 1100ms of overhead to this operation but it's in
non-time-critical flow. And also allows the driver to continue
functioning after the reset.
Functionality documented in ethernet-controller-i350-datasheet 4.2.1.3
https://www.intel.com/content/www/us/en/products/details/ethernet/gigabit-controllers/i350-controllers/docs.html
Signed-off-by: Dawid Wesierski <dawidx.wesierski@intel.com>
Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
