| Age | Commit message (Collapse) | Author |
|---|
|
Pull fscrypt fix from Eric Biggers:
"Fix a bug where when a filesystem was being unmounted, the fscrypt
keyring was destroyed before inodes have been released by the Landlock
LSM.
This bug was found by syzbot"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
fscrypt: check for NULL keyring in fscrypt_put_master_key_activeref()
fscrypt: improve fscrypt_destroy_keyring() documentation
fscrypt: destroy keyring after security_sb_delete()
|
|
Since the expected write location in a sequential file is always at the
end of the file (append write), when an invalid write append location is
detected in zonefs_file_dio_append(), print the invalid written location
instead of the expected write location.
Fixes: a608da3bd730 ("zonefs: Detect append writes at invalid locations")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
|
|
In zonefs_file_dio_append(), initialize the variable size to 0 to
prevent compilation and static code analizers warning such as:
New smatch warnings:
fs/zonefs/file.c:441 zonefs_file_dio_append() error: uninitialized
symbol 'size'.
The warning is a false positive as size is never actually used
uninitialized.
No functional change.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/202303191227.GL8Dprbi-lkp@intel.com/
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
|
|
Write data to fd by calling "vdprintf", in most implementations
of the standard library, the data is finally written by the writev syscall.
But "uprobe_events/kprobe_events" does not allow segmented writes,
so switch the "append_to_file" function to explicit write() call.
Signed-off-by: Liu Pan <patteliu@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230320030720.650-1-patteliu@gmail.com
|
|
The error handling for platform_get_irq() failing no longer works after
a recent change, clang now points this out with a warning:
drivers/gpu/host1x/dev.c:520:6: error: variable 'syncpt_irq' is uninitialized when used here [-Werror,-Wuninitialized]
if (syncpt_irq < 0)
^~~~~~~~~~
Fix this by removing the variable and checking the correct error status.
Fixes: 625d4ffb438c ("gpu: host1x: Rewrite syncpoint interrupt handling")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The Acer Aspire 3830TG predates Windows 8, so it defaults to using
acpi_video# for backlight control, but this is non functional on
this model.
Add a DMI quirk to use the native backlight interface which does
work properly.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Pull NFS client fixes from Anna Schumaker:
- Fix /proc/PID/io read_bytes accounting
- Fix setting NLM file_lock start and end during decoding testargs
- Fix timing for setting access cache timestamps
* tag 'nfs-for-6.3-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFS: Correct timing for assigning access cache timestamp
lockd: set file_lock start and end when decoding nlm4 testargs
NFS: Fix /proc/PID/io read_bytes for buffered reads
|
|
cppcheck reports
drivers/thunderbolt/nhi.c:74:7: style: Local variable 'bit' shadows outer variable [shadowVariable]
int bit;
^
drivers/thunderbolt/nhi.c:66:6: note: Shadowed declaration
int bit = ring_interrupt_index(ring) & 31;
^
drivers/thunderbolt/nhi.c:74:7: note: Shadow variable
int bit;
^
For readablity rename the outer to interrupt_bit and the innner
to auto_clear_bit.
Fixes: 468c49f44759 ("thunderbolt: Disable interrupt auto clear for ring")
Cc: stable@vger.kernel.org
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Add a test case to exercise {btf_id, btf_obj_fd} copy logic between ld_imm64 insns.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230319203014.55866-2-alexei.starovoitov@gmail.com
|
|
Unlike normal libbpf the light skeleton 'loader' program is doing
btf_find_by_name_kind() call at run-time to find ksym in the kernel and
populate its {btf_id, btf_obj_fd} pair in ld_imm64 insn. To avoid doing the
search multiple times for the same ksym it remembers the first patched ld_imm64
insn and copies {btf_id, btf_obj_fd} from it into subsequent ld_imm64 insn.
Fix a bug in copying logic, since it may incorrectly clear BPF_PSEUDO_BTF_ID flag.
Also replace always true if (btf_obj_fd >= 0) check with unconditional JMP_JA
to clarify the code.
Fixes: d995816b77eb ("libbpf: Avoid reload of imm for weak, unresolved, repeating ksym")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230319203014.55866-1-alexei.starovoitov@gmail.com
|
|
Add support for A320M-S2H V2. Tested using module force_load option.
Signed-off-by: Frank Crawford <frank@crawford.emu.id.au>
Acked-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20230318091441.1240921-1-frank@crawford.emu.id.au
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-linus
William writes:
First set of Counter driver fixes for 6.3
This set consists of two fixes for the 104-quad-8 driver:
- fix a read race condition between the FLAG and CNTR registers
(as a result 25-bit count values are no longer supported)
- invert condition check to report correct Index Synapse action
* tag 'counter-fixes-6.3a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter:
counter: 104-quad-8: Fix Synapse action reported for Index signals
counter: 104-quad-8: Fix race condition between FLAG and CNTR reads
|
|
intel_vsec_add_aux() is resource managed including res and
feature_vsec_dev memory.
Fix this by revising the comment of intel_vsec_add_aux since res variable
will also be freed in the intel_vsec_add_aux.
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Link: https://lore.kernel.org/r/20230309040107.534716-3-dzm91@hust.edu.cn
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The previous commit 6a192c0cbf38 ("platform/x86/intel/tpmi: Fix
double free reported by Smatch") incorrectly handle the deallocation of
res variable. As shown in the comment, intel_vsec_add_aux handles all
the deallocation of res and feature_vsec_dev. Therefore, kfree(res) can
still cause double free if intel_vsec_add_aux returns error.
Fix this by adjusting the error handling part in tpmi_create_device,
following the function intel_vsec_add_dev.
Fixes: 6a192c0cbf38 ("platform/x86/intel/tpmi: Fix double free reported by Smatch")
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Link: https://lore.kernel.org/r/20230309040107.534716-2-dzm91@hust.edu.cn
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The first error handling code in intel_vsec_add_aux misses the
deallocation of intel_vsec_dev->resource.
Fix this by adding kfree(intel_vsec_dev->resource) in the error handling
code.
Reviewed-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Link: https://lore.kernel.org/r/20230309040107.534716-4-dzm91@hust.edu.cn
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
This reverts commit ee892ea83d99610fa33bea612de058e0955eec3a.
It was accidentally picked up for backporting. Revert.
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230319140300.2892032-1-ashutosh.dixit@intel.com
|
|
Commit 053fdaa841bd ("nfc: mrvl: Move platform_data struct into driver")
moves the nfcmrvl.h header file from include/linux/platform_data to the
driver's directory, but misses to adjust MAINTAINERS.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.
Just remove the file entry in NFC SUBSYSTEM, as the new location of the
code is already covered by another pattern in that section.
Fixes: 053fdaa841bd ("nfc: mrvl: Move platform_data struct into driver")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that rtl_hw_aspm_clkreq_enable() is a no-op for chip versions < 32,
we can consolidate disabling ASPM before EPHY access in rtl_hw_start().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Heiner Kallweit says:
====================
net: phy: reuse SMSC PHY driver functionality in the meson-gxl PHY driver
The Amlogic Meson internal PHY's have the same register layout as
certain SMSC PHY's (also for non-c22-standard registers). This seems
to be more than just coincidence. Apparently they also need the same
workaround for EDPD mode (energy detect power down). Therefore let's
reuse SMSC PHY driver functionality in the meson-gxl PHY driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The Amlogic Meson internal PHY's have the same register layout as
certain SMSC PHY's (also for non-c22-standard registers). This seems
to be more than just coincidence. Apparently they also need the same
workaround for EDPD mode (energy detect power down). Therefore let's
reuse SMSC PHY driver functionality in the meson-gxl PHY driver.
Tested with a G12A internal PHY. I don't have GXL test hw,
therefore I replace only the callbacks that are identical in
the SMSC PHY driver.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The Amlogic Meson internal PHY's have the same register layout as
certain SMSC PHY's (also for non-c22-standard registers). This seems
to be more than just coincidence. Apparently they also need the same
workaround for EDPD mode (energy detect power down). Therefore let's
export SMSC PHY driver functionality for use by the meson-gxl PHY
driver.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Chris Healy <healych@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Geoff Levand says:
====================
net/ps3_gelic_net: DMA related fixes
v9: Make rx_skb_size local to gelic_descr_prepare_rx.
v8: Add more cpu_to_be32 calls.
v7: Remove all cleanups, sync to spider net.
v6: Reworked and cleaned up patches.
v5: Some additional patch cleanups.
v4: More patch cleanups.
v3: Cleaned up patches as requested.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current Gelic Etherenet driver was checking the return value of its
dma_map_single call, and not using the dma_mapping_error() routine.
Fixes runtime problems like these:
DMA-API: ps3_gelic_driver sb_05: device driver failed to check map error
WARNING: CPU: 0 PID: 0 at kernel/dma/debug.c:1027 .check_unmap+0x888/0x8dc
Fixes: 02c1889166b4 ("ps3: gigabit ethernet driver for PS3, take3")
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The Gelic Ethernet device needs to have the RX sk_buffs aligned to
GELIC_NET_RXBUF_ALIGN, and also the length of the RX sk_buffs must
be a multiple of GELIC_NET_RXBUF_ALIGN.
The current Gelic Ethernet driver was not allocating sk_buffs large
enough to allow for this alignment.
Also, correct the maximum and minimum MTU sizes, and add a new
preprocessor macro for the maximum frame size, GELIC_NET_MAX_FRAME.
Fixes various randomly occurring runtime network errors.
Fixes: 02c1889166b4 ("ps3: gigabit ethernet driver for PS3, take3")
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
clang with W=1 reports
drivers/net/usb/plusb.c:65:1: error:
unused function 'pl_clear_QuickLink_features' [-Werror,-Wunused-function]
pl_clear_QuickLink_features(struct usbnet *dev, int val)
^
This static function is not used, so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Packet length retrieved from descriptor may be larger than
the actual socket buffer length. In such case the cloned
skb passed up the network stack will leak kernel memory contents.
Additionally prevent integer underflow when size is less than
ETH_FCS_LEN.
Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Providing per SA packets/bytes statistics mandates creating unique
counter per SA flow for Rx/Tx, whenever offloaded SA statistics is
desired query the specific SA counter to provide the stack with the
needed data.
Signed-off-by: Raed Salem <raeds@nvidia.com>
Link: https://lore.kernel.org/r/7d5ce20ac495f3054afb633128700e7b7eeeb3cd.1678714336.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Currently one counter is shared between all IPsec Tx offloaded
rules to count the total amount of packets/bytes that was IPsec
Tx offloaded, replace this scheme by adding a new flow table (ft)
with one rule that counts all flows that passes through this
table (like Rx status ft), this ft is pointed by all IPsec Tx
offloaded rules. The above allows to have a counter per tx flow
rule in while keeping a separate global counter that store the
aggregation outcome of all these per flow counters.
Signed-off-by: Raed Salem <raeds@nvidia.com>
Link: https://lore.kernel.org/r/09b9119d1deb6e482fd2d17e1f5760d7c5be1e48.1678714336.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
During XFRM stack acquire flow, a default SA is created to be updated
later, once acquire netlink message is handled in user space.
This SA is also passed to IPsec offload supporting driver, however this
SA acts only as placeholder and does not have context suitable for
offloading in HW yet. Identify this kind of SA by special offload flag
(XFRM_DEV_OFFLOAD_FLAG_ACQ), and create a SW only context.
In such cases with special mark so it won't be installed in HW in addition
flow and on remove/delete free this SW only context.
Signed-off-by: Raed Salem <raeds@nvidia.com>
Link: https://lore.kernel.org/r/8f36d6b61631dcd73fef0a0ac623456030bc9db0.1678714336.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
IKE policies hole, is special policy that exists to allow for IKE
traffic to bypass IPsec encryption even though there is already a
policies and SA(s) configured on same endpoints, these policies
does not nessecarly have the reqid configured, so need to add
an exception for such policies. These kind of policies are allowed
under the condition that at least upper protocol and/or ips
are not 0.
Signed-off-by: Raed Salem <raeds@nvidia.com>
Link: https://lore.kernel.org/r/cbcadde312c24de74c47d9b0616f86a5818cc9bf.1678714336.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Both in RX and TX, the traffic that performs IPsec packet offload
transformation is accounted by HW only. Consequently, the HW should
be queried for packets/bytes statistics when user asks for such
transformation data.
Signed-off-by: Raed Salem <raeds@nvidia.com>
Link: https://lore.kernel.org/r/d90ec74186452b1509ee94875d942cb777b7181e.1678714336.git.leon@kernel.org
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
During XFRM acquire flow, a default SA is created to be updated later,
once acquire netlink message is handled in user space. When the relevant
policy is offloaded this default SA is also offloaded to IPsec offload
supporting driver, however this SA does not have context suitable for
offloading in HW, nor is interesting to offload to HW, consequently needs
a special driver handling apart from other offloaded SA(s).
Add a special flag that marks such SA so driver can handle it correctly.
Signed-off-by: Raed Salem <raeds@nvidia.com>
Link: https://lore.kernel.org/r/f5da0834d8c6b82ab9ba38bd4a0c55e71f0e3dab.1678714336.git.leon@kernel.org
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Currently, policy priority field is ignored and so order
of matching is unpredictable.
Use chains for RX/TX policy offload to support the
priority field.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Link: https://lore.kernel.org/r/9ef3ef88858217932696ad413b1b147b799a11be.1678714336.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
ignore_flow_level is also supported by firmware on TX,
remove this limitation.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/d0025722bfac0a82da758eb540fbf1ff3cacdf74.1678714336.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
To support more generic chains that will be used on other
namespaces and without tc, refactor to remove the dependency
on tc terms.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Link: https://lore.kernel.org/r/bb8570d532d569285b5bff981578507bd15350cb.1678714336.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
In emac_probe, &adpt->work_thread is bound with
emac_work_thread. Then it will be started by timeout
handler emac_tx_timeout or a IRQ handler emac_isr.
If we remove the driver which will call emac_remove
to make cleanup, there may be a unfinished work.
The possible sequence is as follows:
Fix it by finishing the work before cleanup in the emac_remove
and disable timeout response.
CPU0 CPU1
|emac_work_thread
emac_remove |
free_netdev |
kfree(netdev); |
|emac_reinit_locked
|emac_mac_down
|//use netdev
Fixes: b9b17debc69d ("net: emac: emac gigabit ethernet controller driver")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We collect the software statistics counters for RX bytes (reported to
/proc/net/dev and to ethtool -S $dev | grep 'rx_bytes: ") at a time when
skb->len has already been adjusted by the eth_type_trans() ->
skb_pull_inline(skb, ETH_HLEN) call to exclude the L2 header.
This means that when connecting 2 DSA interfaces back to back and
sending 1 packet with length 100, the sending interface will report
tx_bytes as incrementing by 100, and the receiving interface will report
rx_bytes as incrementing by 86.
Since accounting for that in scripts is quirky and is something that
would be DSA-specific behavior (requiring users to know that they are
running on a DSA interface in the first place), the proposal is that we
treat it as a bug and fix it.
This design bug has always existed in DSA, according to my analysis:
commit 91da11f870f0 ("net: Distributed Switch Architecture protocol
support") also updates skb->dev->stats.rx_bytes += skb->len after the
eth_type_trans() call. Technically, prior to Florian's commit
a86d8becc3f0 ("net: dsa: Factor bottom tag receive functions"), each and
every vendor-specific tagging protocol driver open-coded the same bug,
until the buggy code was consolidated into something resembling what can
be seen now. So each and every driver should have its own Fixes: tag,
because of their different histories until the convergence point.
I'm not going to do that, for the sake of simplicity, but just blame the
oldest appearance of buggy code.
There are 2 ways to fix the problem. One is the obvious way, and the
other is how I ended up doing it. Obvious would have been to move
dev_sw_netstats_rx_add() one line above eth_type_trans(), and below
skb_push(skb, ETH_HLEN). But DSA processing is not as simple as that.
We count the bytes after removing everything DSA-related from the
packet, to emulate what the packet's length was, on the wire, when the
user port received it.
When eth_type_trans() executes, dsa_untag_bridge_pvid() has not run yet,
so in case the switch driver requests this behavior - commit
412a1526d067 ("net: dsa: untag the bridge pvid from rx skbs") has the
details - the obvious variant of the fix wouldn't have worked, because
the positioning there would have also counted the not-yet-stripped VLAN
header length, something which is absent from the packet as seen on the
wire (there it may be untagged, whereas software will see it as
PVID-tagged).
Fixes: f613ed665bb3 ("net: dsa: Add support for 64-bit statistics")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Colin Foster says:
====================
add support for ocelot external ports
This is the start of part 3 of what is hopefully a 3-part series to add
Ethernet switching support to Ocelot chips.
Part 1 of the series (A New Chip) added general support for Ocelot chips
that were controlled externally via SPI.
https://lore.kernel.org/all/20220815005553.1450359-1-colin.foster@in-advantage.com/
Part 2 of the series (The Ethernet Strikes Back) added DSA Ethernet
support for ports 0-3, which are the four copper ports that are internal
to the chip.
https://lore.kernel.org/all/20230127193559.1001051-1-colin.foster@in-advantage.com/
Part 3 will, at a minimum, add support for ports 4-7, which are
configured to use QSGMII to an external phy (Return Of The QSGMII). With
any luck, and some guidance, support for SGMII, SFPs, etc. will also be
part of this series.
V1 was submitted as an RFC - and that was rightly so. I suspected I
wasn't doing something right, and that was certainly the case. V2 is
much cleaner, so hopefully upgrading it to PATCH status is welcomed.
Thanks to Russell and Vladimir for correcting my course from V1.
In V1 I included a device tree snippet. I won't repeat that here, but
I will include a boot log snippet, in case it is of use:
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The VSC7512 has four ports with internal phys that are already supported.
There are additional ports that can be configured to work with external
phys.
Add support for these additional ethernet ports.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Ports for Ocelot devices (VSC7511, VSC7512, VSC7513 and VSC7514) support
external phys. When external phys are used, additional configuration on
each port is required to enable QSGMII mode and set external phy modes.
Add a configurable hook into these routines, so the external ports can be
used.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If a user of the Felix driver has a port running in SGMII / QSGMII mode, it
will need to utilize phylink_mac_config(). Add this configurability.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The VSC7512 and VSC7514 have internal PLLs that can be used to control
different peripherals. Initialize these high speed I/O (HSIO) PLLs when
they exist, so that dependent peripherals like QSGMII can function.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During chip initialization, ports that use SGMII / QSGMII to interface to
external phys need to be configured on the VSC7513 and VSC7514. Expose this
configuration routine, so it can be used by DSA drivers.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ocelot-switch driver can utilize the phylink_mac_config routine. Move
this to the ocelot library location and export the symbol to make this
possible.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Ocelot chips have an internal PLL that must be used when communicating
through external phys. Expose the init routine, so it can be used by other
drivers.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for the Ocelot SERDES module to support functionality of all
non-internal phy ports.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The phy-ocelot-serdes module has exclusively been used in a syscon setup,
from an internal CPU. The addition of external control of ocelot switches
via an existing MFD implementation means that syscon is no longer the only
interface that phy-ocelot-serdes will see.
In the MFD configuration, an IORESOURCE_REG resource will exist for the
device. Utilize this resource to be able to function in both syscon and
non-syscon configurations.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When we change the M/N values seamlessly during a fastset we should
also update the vblank timestamping stuff to make sure the vblank
timestamp corrections/guesstimations come out exact.
Note that only crtc_clock and framedur_ns can actually end up
changing here during fastsets. Everything else we touch can
only change during full modesets.
Technically we should try to do this exactly at the start of
vblank, but that would require some kind of double buffering
scheme. Let's skip that for now and just update things right
after the commit has been submitted to the hardware. This
means the information will be properly up to date when the
vblank irq handler goes to work. Only if someone ends up
querying some vblanky stuff in between the commit and start
of vblank may we see a slight discrepancy.
Also this same problem really exists for the DRRS downclocking
stuff. But as that is supposed to be more or less transparent
to the user, and it only drops to low gear after a long delay
(1 sec currently) we probably don't have to worry about it.
Any time something is actively submitting updates DRRS will
remain in high gear and so the timestamping constants will
match the hardware state.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Fixes: e6f29923c048 ("drm/i915: Allow M/N change during fastset on bdw+")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230310235828.17439-1-ville.syrjala@linux.intel.com
(cherry picked from commit 8cb1f95cca68421b08333175719fdd3615372ca8)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Use hex format so that it is easier to decode.
Fixes: fe5979665f64 ("drm/i915/debugfs: Add perf_limit_reasons in debugfs")
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230315022906.2467408-1-vinay.belgaumkar@intel.com
(cherry picked from commit 5e008ba67cb80084e99b40ccd46f9029ae421632)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Probe pseudo errors should be injected only in places where real errors
can be encountered, otherwise unwinding code can be broken.
Placing intel_uc_init_late before i915_inject_probe_error violated
this rule, resulting in following bug:
__intel_gt_disable:655 GEM_BUG_ON(intel_gt_pm_is_awake(gt))
Fixes: 481d458caede ("drm/i915/guc: Add golden context to GuC ADS")
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230314151920.1065847-1-andrzej.hajda@intel.com
(cherry picked from commit c4252a11131c7f27a158294241466e2a4e7ff94e)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
