summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-11-15macvlan: disable LRO on lower device instead of macvlanMichal Kubeček
A macvlan device has always LRO disabled so that calling dev_disable_lro() on it does nothing. If we need to disable LRO e.g. because - the macvlan device is inserted into a bridge - IPv6 forwarding is enabled for it - it is in a different namespace than lowerdev and IPv4 forwarding is enabled in it we need to disable LRO on its underlying device instead (as we do for 802.1q VLAN devices). v2: use newly introduced netif_is_macvlan() Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-15macvlan: introduce macvlan_dev_real_dev() helper functionMichal Kubeček
Introduce helper function macvlan_dev_real_dev which returns the underlying device of a macvlan device, similar to vlan_dev_real_dev() for 802.1q VLAN devices. v2: IFF_MACVLAN flag and equivalent of is_macvlan_dev() were introduced in the meantime v3: do BUG() if compiled without macvlan support Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-15i2c: bcm-kona: Introduce Broadcom I2C DriverTim Kryger
Introduce support for Broadcom Serial Controller (BSC) I2C bus found in the Kona family of Mobile SoCs. FIFO hardware is utilized but only standard mode (100kHz), fast mode (400kHz), fast mode plus (1MHz), and I2C high-speed (3.4 MHz) bus speeds are supported. Signed-off-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <matt.porter@linaro.org> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> [wsa: fixed Kconfig sorting, squashed broken out patches into one] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-11-15bonding: add ip checks when store ip targetWang Weidong
I met a Bug when I add ip target with the wrong ip address: echo +500.500.500.500 > /sys/class/net/bond0/bonding/arp_ip_target the wrong ip address will transfor to 245.245.245.244 and add to the ip target success, it is uncorrect, so I add checks to avoid adding wrong address. The in4_pton() will set wrong ip address to 0.0.0.0, it will return by the next check and will not add to ip target. v2 According Veaceslav's opinion, simplify the code. v3 According Veaceslav's opinion, add broadcast check and make a micro definition to package it. v4 Solve the problem of the format which David point out. Suggested-by: Veaceslav Falico <vfalico@redhat.com> Suggested-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-15IB/mlx5: Fix page shift in create CQ for userspaceEli Cohen
When creating a CQ, we must use mlx5 adapter page shift. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-11-15IB/mlx4: Fix device max capabilities checkEli Cohen
Move the check on max supported CQEs after the final number of entries is evaluated. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-11-15IB/mlx5: Fix list_del of empty listEli Cohen
For archs with pages size of 4K, when the chunk is freed, fwp is not in the list so avoid attempting to delete it. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-11-15IB/mlx5: Remove dead codeEli Cohen
The value of the local variable index is never used in reg_mr_callback(). Signed-off-by: Eli Cohen <eli@mellanox.com> [ Remove now-unused variable delta too. - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-11-15Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm regression fix from Dave Airlie: "Forgot this one liner was necessary to fix module reload issues introduced earlier in the drm pull" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: drm: check for !kdev in drm_unplug_minor()
2013-11-15Merge tag 'blackfin-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux Pull blackfin updates from Steven Miao: "Blackfin gpio changes, add adi pinctrl driver, and bug fixes" * tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux: blackfin: fix build warning for unused variable smp: bf561: and smb_wmb()/smp_rmb() at ipi send/receive pm: use GFP_ATOMIC when pm core call this function blackfin: serial: Add serial port_fer and port_mux early platform resources. blackfin: pinctrl-adi2: code cleanup after using pinctrl-adi2 blackfin: adi gpio driver and pinctrl driver support bf609: update default config for spi Blackfin: bfin_gpio: Use proper mask for comparing pfunc
2013-11-15Merge tag 'for-3.13' of git://git.openrisc.net/~jonas/linuxLinus Torvalds
Pull OpenRISC updates from Jonas Bonn: - small cleanups to make allmodconfig pass - defconfig refresh - a handful of code sanitization patches * tag 'for-3.13' of git://git.openrisc.net/~jonas/linux: openrisc: Refactor or32_early_setup() openrisc: Remove unused declaration of __initramfs_start openrisc: Use the declarations provided by <asm/sections.h> openrisc: Refresh or1ksim_defconfig for v3.12 openrisc: Refactor 16-bit constant relocation openrisc: include: asm: Kbuild: add default "vga.h" openrisc: Makefile: append "-D__linux__" to KBUILD_CFLAGS
2013-11-15i2c: cbus-gpio: Fix device tree bindingTony Lindgren
Looks like we're missing two lines needed to make it work properly with device tree. Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-11-15Merge branch 'misc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull misc kbuild changes from Michal Marek: - make tags fixes again - scripts/show_delta fix for newer python - scripts/kernel-doc does not fail on unknown function prototype - one less coccinelle check this time * 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: scripts/tags.sh: remove obsolete __devinit[const|data] scripts/kernel-doc: make unknown function prototype a Warning instead of an Error show_delta: Update script to support python versions 2.5 through 3.3 scripts/coccinelle/api: remove devm_request_and_ioremap.cocci scripts/tags.sh: Increase identifier list
2013-11-15Merge branch 'kconfig' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kconfig changes from Michal Marek: - xconfig stores its setting in a meaningful path (~/.config/kernel.org/qconf.conf) - kconfig symbol search fix - documentation fixes - cleanup & comment update - fix warning when a kconfig symbol is defined with two different types - Yann is now officially listed as maintainer of kconfig, but he prefers me to send pull requests for now * 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: MAINTAINERS: New kconfig maintainer xconfig: Fix the filename for GUI settings kconfig: fix bug in search results string: use strlen(gstr->s), not gstr->len kconfig: remove unused definition from scanner kconfig: adjust warning message for conflicting types kconfig: fix trivial typos and update mconf documentation kconfig: add short explanation to SYMBOL_WRITE Documentation/kbuild/kconfig.txt: 'make listnewconfig' replaces: yes "" | make oldconfig
2013-11-15Merge branch 'kbuild' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild changes from Michal Marek: - LTO fixes, but the kallsyms part had to be reverted - Pass -Werror=implicit-int and -Werror=strict-prototypes to the compiler by default - snprintf fix in modpost - remove GREP_OPTIONS from the environment to be immune against exotic grep option settings * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kallsyms: Revert back to 128 max symbol length Kbuild: Ignore GREP_OPTIONS env variable scripts: kallsyms: Use %zu to print 'size_t' scripts/bloat-o-meter: use .startswith rather than fragile slicing scripts/bloat-o-meter: ignore changes in the size of linux_banner kbuild: replace unbounded sprintf call in modpost kbuild, bloat-o-meter: fix static detection Kbuild: Handle longer symbols in kallsyms.c kbuild: Increase kallsyms max symbol length Makefile: enable -Werror=implicit-int and -Werror=strict-prototypes by default
2013-11-15Merge tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreamingLinus Torvalds
Pull Kconfig cleanups from Mark Salter: "Remove some unused config options from C6X and clean up PC_PARPORT dependencies. The latter was discussed here: https://lkml.org/lkml/2013/10/8/12" * tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming: c6x: remove unused COMMON_CLKDEV Kconfig parameter Kconfig cleanup (PARPORT_PC dependencies) x86: select ARCH_MIGHT_HAVE_PC_PARPORT unicore32: select ARCH_MIGHT_HAVE_PC_PARPORT sparc: select ARCH_MIGHT_HAVE_PC_PARPORT sh: select ARCH_MIGHT_HAVE_PC_PARPORT powerpc: select ARCH_MIGHT_HAVE_PC_PARPORT parisc: select ARCH_MIGHT_HAVE_PC_PARPORT mips: select ARCH_MIGHT_HAVE_PC_PARPORT microblaze: select ARCH_MIGHT_HAVE_PC_PARPORT m68k: select ARCH_MIGHT_HAVE_PC_PARPORT ia64: select ARCH_MIGHT_HAVE_PC_PARPORT arm: select ARCH_MIGHT_HAVE_PC_PARPORT alpha: select ARCH_MIGHT_HAVE_PC_PARPORT c6x: remove unused parameter in Kconfig
2013-11-15[CIFS] Set copychunk defaultsSteve French
Patch 2 of the copy chunk series (the final patch will use these to handle copies of files larger than the chunk size. We set the same defaults that Windows and Samba expect for CopyChunk. Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: David Disseldorp <ddiss@samba.org>
2013-11-15rtlwifi: rtl8192cu: Fix more pointer arithmetic errorsLarry Finger
This driver uses a number of macros to get and set various fields in the RX and TX descriptors. To work correctly, a u8 pointer to the descriptor must be used; however, in some cases a descriptor structure pointer is used instead. In addition, a duplicated statement is removed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-15mwifiex: fix issues in driver unload path for USB chipsetsUjjal Roy
1) After driver load failure, clear 'card->adapter' instead of card pointer so that card specific cleanup is performed later when user unloads the driver. 2) Clear usb_card pointer in disconnect handler to avoid invalid memory access when user unloads the driver after removing the card. Signed-off-by: Ujjal Roy <royujjal@gmail.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-15mwifiex: fix memory leak issue for sdio and pcie cardsAmitkumar Karwar
When driver is failed to load, card pointer doesn't get freed. We will free it in cleanup handler which is called in failure as well as unload path. Also, update drvdata in init/cleanup handlers instead of register/unregister handlers. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-15mwifiex: fix potential mem leak in .del_virtual_intfAmitkumar Karwar
1) Currently we freeing wdev for each interface in driver unload path. We may leak memory if user have already deleted an interface. mwifiex_add_virtual_intf() allocates wdev structure. So it should be freed in mwifiex_del_virtual_intf(). This will make sure that wdev will be freed when user deletes an interface and also in unload path. 2) "priv->netdev->ieee80211_ptr" should also be cleared in mwifiex_del_virtual_intf. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-15mwifiex: fix NULL pointer dereference in mwifiex_fw_dpcAmitkumar Karwar
We don't need to free/unregister wiphy when mwifiex_register_cfg80211() fails. The routine internally takes care of it. This redundant code can cause NULL pointer dereference, for adapter->wiphy. Reported-by: Ujjal Roy <royujjal@gmail.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-15mwifiex: failure path handling in mwifiex_add_virtual_intf()Amitkumar Karwar
1) If register_netdevice() is failed, we are freeing netdev pointer, but priv->netdev is not cleared. This gives kernel paging request error when driver is unloaded or interface is deleted. Fix the problem by clearing the pointer. 2) Fix memory leak issue by freeing 'wdev' in failure paths. Also, clear priv->wdev pointer. As mwifiex_add_virtual_intf() successfully handles the failure conditions, redundant code under err_add_intf label is removed in this patch. Reported-by: Ujjal Roy <royujjal@gmail.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-15mwifiex: use return value of mwifiex_add_virtual_intf() correctlyAmitkumar Karwar
mwifiex_add_virtual_intf() returns ERR_PTR values. So use IS_ERR() macro instead of checking for NULL pointer. Reported-by: Ujjal Roy <royujjal@gmail.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-15rt2x00: fix a crash bug in the HT descriptor handling fixFelix Fietkau
Commit "rt2x00: fix HT TX descriptor settings regression" assumes that the control parameter to rt2x00mac_tx is always non-NULL. There is an internal call in rt2x00lib_bc_buffer_iter where NULL is passed. Fix the resulting crash by adding an initialized dummy on-stack ieee80211_tx_control struct. Cc: stable@vger.kernel.org # 3.7+ Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-15ath9k: Fix issue with MCS15Sujith Manoharan
On some boards which are based on AR9300, AR9580 or AR9550, MCS15 usage is problematic. This is because these boards use a "frequency doubler", which doubles the refclk to get better EVM, but causes spurs. Handle this properly in the driver to recover throughput. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-15ath9k: Update AR9462 2.1 initvalsSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-15ath: fix dynamic user regulatory settingsLuis R. Rodriguez
A world regulatory domain check was in place that prevents user dynamic regulatory hints from being processed. This was there for historical reasons as this was only possible previously for world roaming cards and dynamic regulatory settings was only possible for country IEs. Fix this by enforcing the world regulatory domain check only for when the initiator is a country IE. Support for dynamic user regulatory support is already checked. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-15Merge branch 'for-upstream' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
2013-11-15Merge tag 'at91-fixes-non-critical' of git://github.com/at91linux/linux-at91 ↵Olof Johansson
into fixes From Nicolas Ferre, fixes for early boot hangs on at91: Fixes for RTT & RTC interrupts that can fire early during boot process and kill the system. * tag 'at91-fixes-non-critical' of git://github.com/at91linux/linux-at91: ARM: at91: fix hanged boot due to early rtt-interrupt ARM: at91: fix hanged boot due to early rtc-interrupt
2013-11-15nfs: fix pnfs Kconfig defaultsChristoph Hellwig
Defaulting to m seem to prevent building the pnfs layout modules into the kernel. Default to the value of CONFIG_NFS_V4 make sure they are built in for built-in NFSv4 support and modular for a modular NFSv4. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-11-15NFS: correctly report misuse of "migration" mount option.NeilBrown
The current test on valid use of the "migration" mount option can never report an error as it will only do so if mnt->version !=4 && mnt->minor_version != 0 (and some other condition), but if that test would succeed, then the previous test has already gone-to out_minorversion_mismatch. So change the && to an || to get correct semantics. Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-11-15IB/core: Encorce MR access rights rules on kernel consumersEli Cohen
Enforce the rule that when requesting remote write or atomic permissions, local write must be indicated as well. See IB spec 11.2.8.2. Spotted by: Hagay Abramovsky <hagaya@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-11-15IB/mlx4: Fix endless loop in resize CQEli Cohen
When calling get_sw_cqe() we need pass the consumer_index and not the masked value. Failure to do so will cause incorrect result of get_sw_cqe() possibly leading to endless loop. This problem was reported and analyzed by Michael Rice from HP. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-11-15ARM: OMAP2+: Fix build for dra7xx without omap4 and 5Tony Lindgren
Otherwise we can get errors like: arch/arm/mach-omap2/prm44xx.c:274: error: redefinition of ‘omap44xx_prm_reconfigure_io_chain’ arch/arm/mach-omap2/built-in.o: In function `default_finish_suspend': arch/arm/mach-omap2/omap-mpuss-lowpower.c:95: undefined reference to `omap_do_wfi' Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-15ARM: OMAP2+: omap_device: maintain sane runtime pm status around suspend/resumeNishanth Menon
OMAP device hooks around suspend|resume_noirq ensures that hwmod devices are forced to idle using omap_device_idle/enable as part of the last stage of suspend activity. For a device such as i2c who uses autosuspend, it is possible to enter the suspend path with dev->power.runtime_status = RPM_ACTIVE. As part of the suspend flow, the generic runtime logic would increment it's dev->power.disable_depth to 1. This should prevent further pm_runtime_get_sync from succeeding once the runtime_status has been set to RPM_SUSPENDED. Now, as part of the suspend_noirq handler in omap_device, we force the following: if the device status is !suspended, we force the device to idle using omap_device_idle (clocks are cut etc..). This ensures that from a hardware perspective, the device is "suspended". However, runtime_status is left to be active. *if* an operation is attempted after this point to pm_runtime_get_sync, runtime framework depends on runtime_status to indicate accurately the device status, and since it sees it to be ACTIVE, it assumes the module is functional and returns a non-error value. As a result the user will see pm_runtime_get succeed, however a register access will crash due to the lack of clocks. To prevent this from happening, we should ensure that runtime_status exactly indicates the device status. As a result of this change any further calls to pm_runtime_get* would return -EACCES (since disable_depth is 1). On resume, we restore the clocks and runtime status exactly as we suspended with. These operations are not expected to fail as we update the states after the core runtime framework has suspended itself and restore before the core runtime framework has resumed. Cc: stable@vger.kernel.org # v3.4+ Reported-by: J Keerthy <j-keerthy@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Rajendra Nayak <rnayak@ti.com> Acked-by: Kevin Hilman <khilman@linaro.org> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-15doc: devicetree: Add bindings documentation for omap-des driverJoel Fernandes
Add documentation for the generic OMAP DES crypto modul describing the device tree bindings. Reviewed-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-15ARM: dts: doc: Document missing compatible property for omap-sham driverLokesh Vutla
A new compatible property "ti,omap5-sham" is added to the omap-sham driver recently to support SHA/MD5 for OMAP5,DRA7 and AM43XX. Documenting the same. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-15ARM: OMAP3: Beagle: fix return value check in beagle_opp_init()Wei Yongjun
In case of error, the function get_cpu_device() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-15btrfs: get rid of fdentry()Al Viro
3 of 4 callers actually want file_inode()... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-11-15btrfs: fix empty_zero_page misusageChris Mason
Heiko Carstens noticed that btrfs was using empty_zero_page incorrectly. He explained: The definition of empty_zero_page is architecture specific. It is (currently) either a character array, an unsigned long containing the address of the empty_zero_page, or even worse only the address of the struct page belonging to the empty_zero_page. This commit changes btrfs to use a for-loop instead. On x86 the resulting .ko is smaller, and we're no longer worrying about how each arch builds its zeros. Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-11-15s390/pci: implement hotplug notificationsSebastian Ott
When the availability of a pci function has changed by means outside of our control we receive an availability event. Implement/improve the handling of these notifications. Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-11-15s390/scm_block: do not hide eadm subchannel dependencySebastian Ott
Stop hiding scm_block's dependency to the eadm subchannel driver (by using functions provided by the eadm subchannel instead of wrappers provided by the scm bus). This will help userspace recognizing module dependencies (e.g. for building a ramdisk). As a side effect we can get rid of some code reimplementing refcounting between those modules. Reported-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-11-15s390/sclp: Consolidate early sclp init calls to sclp_early_detect()Michael Holzheu
The new function calls the old ones. The sclp_event_mask_early() is removed and replaced by one invocation of sclp_set_event_mask(0, 0). Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-11-15s390/sclp: Move early code from sclp_cmd.c to sclp_early.cMichael Holzheu
The early SCLP driver code in sclp_cmd.c belongs to sclp_early.c because it is independent from the 'normal' SCLP driver. So move it to sclp_early.c Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-11-15s390/sclp: Determine HSA size dynamically for zfcpdumpMichael Holzheu
Currently we have hardcoded the HSA size to 32 MiB. With this patch the HSA size is determined dynamically via SCLP in early.c. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-11-15s390/sclp: Move declarations for sclp_sdias into separate header fileMichael Holzheu
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-11-15s390/pci: implement pcibios_remove_busSebastian Ott
Implement pcibios_remove_bus to free arch specific data when a pci bus is deregistered. While at it remove a useless kzalloc/kfree wrapper. Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-11-15s390/pci: improve handling of bus resourcesSebastian Ott
Cleanup the functions for allocation and setup of bus resources. Do not allocate the same name for each resource but use a per-bus name. Also provide means to cleanup all resources allocated by a bus. Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-11-15s390/3270: fix missing device_destroy() callHendrik Brueckner
Unloading the fs3270 kernel module does not remove the created "3270/tub" device. Reloading the module then causes a sysfs warning: "sysfs: cannot create duplicate filename '/devices/virtual/3270/3270!tub'". Call device_destroy() in the module exit function to solve this issue. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
generated by cgit (git 2.34.1) at 2025-09-11 22:29:07 +0000