Age | Commit message (Collapse) | Author |
|
The current code use the encapsulation key id value as the mask of that
parameter which is wrong. Fix that by using a full mask.
Fixes: bc3103f1ed40 ('net/sched: cls_flower: Classify packet in ip tunnels')
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Acked-by: Amir Vadai <amir@vadai.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit 9f12cea96f47f98d612a0a0b84f950a0163731bf.
Mark writes:
Unfortunately, this patch will result in erroneous stack traces
on some architectures. Sorry about this; I should have verified
this more thoroughly before sending the series out.
Please drop the patch at your earliest convenience.
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
An "unnecessary" 'else' was removed due to complains from checkpatch.pl
as it is preceded by a 'return', however the 'else' branch is necessary
as an earlier branch of the 'if' falls through. By removing the 'else',
that route now hits the 'break' and the 'while' loop exits prematurely.
This commit reverts that change and puts the original 'else' back in
place.
Signed-off-by: Matthew Kilgore <mattkilgore12@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
If SKCBF_TX_FLAG_COMPL flag is set and unacknowledged credits are >= max
credits / 2, set completion bit in work request to reclaim credits.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Chris Leech and I are taking over as open-iscsi maintainers.
Signed-off-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This patch enable no vccq quirk for SKHynix devices. SKHynix ufs device
don't need vccq vrail for device operation.
Signed-off-by: Kyuho Choi <kyuho.choi@sk.com>
Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
We get 6 warnings when building kernel with W=1:
drivers/scsi/be2iscsi/be_main.c:65:1: warning: no previous prototype for 'beiscsi_log_enable_disp' [-Wmissing-prototypes]
drivers/scsi/be2iscsi/be_main.c:78:1: warning: no previous prototype for 'beiscsi_log_enable_change' [-Wmissing-prototypes]
drivers/scsi/be2iscsi/be_main.c:97:1: warning: no previous prototype for 'beiscsi_log_enable_store' [-Wmissing-prototypes]
drivers/scsi/be2iscsi/be_main.c:116:1: warning: no previous prototype for 'beiscsi_log_enable_init' [-Wmissing-prototypes]
drivers/scsi/be2iscsi/be_main.c:4587:5: warning: no previous prototype for 'beiscsi_iotask_v2' [-Wmissing-prototypes]
drivers/scsi/be2iscsi/be_main.c:4976:6: warning: no previous prototype for 'beiscsi_hba_attrs_init' [-Wmissing-prototypes]
In fact, these functions are only used in the file in which they are
declared and don't need a declaration, but can be made static. So this
patch marks these functions with 'static'.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Reviewed-by: Jitendra Bhivare <Jitendra.bhivare@broadcom>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This patch adds an option to use XZ compression for the kernel image.
Currently this is only enabled for 64-bit Book3S targets, which is
roughly equivalent to the platforms that use the kernel's zImage
wrapper, and that have been tested.
The bulk of the 32-bit platforms and 64-bit BookE use uboot images,
which relies on uboot implementing XZ. In future we can enable XZ
support for those targets once someone has tested it.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This modifies the wrapper script so that the -Z option takes an argument
to specify the compression type. It can either be 'gz', 'xz' or 'none'.
The legazy --no-gzip and -z options are still supported and will set the
compression to none and gzip respectively, but they are not documented.
Only XZ -6 is used for compression rather than XZ -9. Using compression
levels higher than 6 requires the decompressor to build a large (64MB)
dictionary when decompressing and some environments cannot satisfy such
large allocations (e.g. POWER 6 LPAR partition firmware).
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This code is no longer used and can be removed.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Currently the powerpc boot wrapper has its own wrapper around zlib to
handle decompressing gzipped kernels. The kernel decompressor library
functions now provide a generic interface that can be used in the
pre-boot environment. This allows boot wrappers to easily support
different compression algorithms. This patch converts the wrapper to use
this new API, but does not add support for using new algorithms.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Most architectures allow the compression algorithm used to produced the
vmlinuz image to be selected as a kernel config option. In preperation
for supporting algorithms other than gzip in the powerpc boot wrapper
the makefile needs to be modified to use these config options.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The powerpc boot wrapper is potentially compiled with a separate
toolchain and/or toolchain flags than the rest of the kernel. The usual
case is a 64-bit big endian kernel builds a 32-bit big endian wrapper.
The main problem with this is that the wrapper does not have access to
the kernel headers (without a lot of gross hacks). To get around this
the required headers are copied into the build directory via several sed
scripts which rewrite problematic includes. This patch moves these
fixups out of the makefile into a separate .sed script file to clean up
makefile slightly.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
[mpe: Reword first paragraph of change log a little]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The udl damage handler is supposed to render 'height' lines, but its
iterator has an obvious typo that makes it miss most lines if the
rectangle does not cover 0/0.
Fix the damage handler to correctly render all lines.
This is a fallout from:
commit e375882406d0cc24030746638592004755ed4ae0
Author: Noralf Trønnes <noralf@tronnes.org>
Date: Thu Apr 28 17:18:37 2016 +0200
drm/udl: Use drm_fb_helper deferred_io support
Tested-by: poma <poma@gmail.com>
Cc: stable@vger.kernel.org # 4.7+
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
To get more coverage, enable COMPILE_TEST for this driver.
When compile testing eDMA or omap-dma, select also the ti-dma-crossbar so
it is also covered by the compile testing.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
|
|
To get more coverage, enable COMPILE_TEST for this driver.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
|
|
To get more coverage, enable COMPILE_TEST for this driver.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
|
|
Use pointers to static constant variables for crossbar type and for DMA
offset configuration.
Fixes compiler warnings on 64bit architectures:
drivers/dma/ti-dma-crossbar.c: In function ‘ti_dra7_xbar_probe’:
drivers/dma/ti-dma-crossbar.c:398:21: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
xbar->dma_offset = (u32)match->data;
^
drivers/dma/ti-dma-crossbar.c: In function ‘ti_dma_xbar_probe’:
drivers/dma/ti-dma-crossbar.c:431:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
switch ((u32)match->data) {
^
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
|
|
The correct type is int and not for the third parameter of
of_find_property().
Fixes compilation for 64bit architectures (x86_64, aarch64).
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
|
|
The DMAengine driver for omap-dma use three function calls from the
plat-omap legacy driver. When the DMAengine driver is built when ARCH_OMAP
is not set, the compilation will fail due to missing symbols.
Add empty inline functions to allow the DMAengine driver to be compiled
with COMPILE_TEST.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
|
|
The clear_bits() helper is not used by the driver so it can be removed.
powerpc architecture defines the set_bits() in
arch/powerpc/include/asm/bitops.h which results failed compile testing on
powerpc architecture:
>> drivers/dma/edma.c:415:20: error: conflicting types for 'set_bits'
static inline void set_bits(int offset, int len, unsigned long *p)
^~~~~~~~
In file included from include/linux/bitops.h:36:0,
from include/linux/kernel.h:10,
from include/linux/list.h:8,
from include/linux/kobject.h:20,
from include/linux/device.h:17,
from include/linux/dmaengine.h:20,
from drivers/dma/edma.c:16:
arch/powerpc/include/asm/bitops.h:75:14: note: previous definition of 'set_bits' was here
DEFINE_BITOP(set_bits, or, "")
^
arch/powerpc/include/asm/bitops.h:58:24: note: in definition of macro 'DEFINE_BITOP'
static __inline__ void fn(unsigned long mask, \
^~
>> drivers/dma/edma.c:421:20: error: conflicting types for 'clear_bits'
static inline void clear_bits(int offset, int len, unsigned long *p)
^~~~~~~~~~
In file included from include/linux/bitops.h:36:0,
from include/linux/kernel.h:10,
from include/linux/list.h:8,
from include/linux/kobject.h:20,
from include/linux/device.h:17,
from include/linux/dmaengine.h:20,
from drivers/dma/edma.c:16:
arch/powerpc/include/asm/bitops.h:76:14: note: previous definition of 'clear_bits' was here
DEFINE_BITOP(clear_bits, andc, "")
^
arch/powerpc/include/asm/bitops.h:58:24: note: in definition of macro 'DEFINE_BITOP'
static __inline__ void fn(unsigned long mask, \
^~
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
|
|
The correct type is int and not for the third parameter of
of_find_property().
Fixes compilation for 64bit architectures (x86_64, aarch64).
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
|
|
bugfixes for qemu (bochs, qxl and virtio-gpu) drm drivers
* tag 'drm-qemu-20160921' of git://git.kraxel.org/linux:
drm/virtio: add real fence context and seqno
drm/virtio: drop virtio_gpu_execbuffer_ioctl() wrapping
virtio-gpu: avoid possible NULL pointer dereference
drm/qxl: reapply cursor after SetCrtc calls
bochs: ignore device if there isn't enougth memory
|
|
Use pointers to static constant variables for eDMA binding
type (legacy vs TPCC).
Fixes the following warning when compiling the driver for 64bit
architectures (x86_64 for example):
drivers/dma/edma.c:2185:16: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
if (match && (u32)match->data == EDMA_BINDING_TPCC)
^
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
1GbE Intel Wired LAN Driver Updates 2016-09-27
This series contains updates to igb and igbvf.
Wei Yongjun makes a function static to shut up sparse.
Todd bumps the igb and igbvf version, which is long overdue.
Jake fixes an issue where the PPS SYS_WRAP interrupt was not re-enabled
after a reset, which resulted in disabling of the PPS signaling.
v2: dropped patch 5 of the original series, since the PCI quirk patch
needs to be reworked by Alex and Sasha to address issues that Bjorn
Helgaas and Alex Williamson brought up.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The MODULE_DEVICE_TABLE() were missing from the driver for the of_device_id
structures.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
|
|
put_cpu_var takes the percpu data, not the data returned from
get_cpu_var.
This doesn't change the behavior.
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Shaohua Li <shli@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
put_cpu_var takes the percpu data, not the data returned from
get_cpu_var.
This doesn't change the behavior.
Cc: Tejun Heo <tj@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Shaohua Li <shli@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Linux 4.8-rc8
There was a lot of fallout in the imx/amdgpu/i915 drivers, so backmerge
it now to avoid troubles.
* tag 'v4.8-rc8': (1442 commits)
Linux 4.8-rc8
fault_in_multipages_readable() throws set-but-unused error
mm: check VMA flags to avoid invalid PROT_NONE NUMA balancing
radix tree: fix sibling entry handling in radix_tree_descend()
radix tree test suite: Test radix_tree_replace_slot() for multiorder entries
fix memory leaks in tracing_buffers_splice_read()
tracing: Move mutex to protect against resetting of seq data
MIPS: Fix delay slot emulation count in debugfs
MIPS: SMP: Fix possibility of deadlock when bringing CPUs online
mm: delete unnecessary and unsafe init_tlb_ubc()
huge tmpfs: fix Committed_AS leak
shmem: fix tmpfs to handle the huge= option properly
blk-mq: skip unmapped queues in blk_mq_alloc_request_hctx
MIPS: Fix pre-r6 emulation FPU initialisation
arm64: kgdb: handle read-only text / modules
arm64: Call numa_store_cpu_info() earlier.
locking/hung_task: Fix typo in CONFIG_DETECT_HUNG_TASK help text
nvme-rdma: only clear queue flags after successful connect
i2c: qup: skip qup_i2c_suspend if the device is already runtime suspended
perf/core: Limit matching exclusive events to one PMU
...
|
|
When a reset occurs, the PPS SYS_WRAP interrupt was not re-enabled which
resulted in disabling of the PPS signaling. Fix this by recording when
the interrupt is on and ensuring that we re-enable it every time we
reset.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Bump igb version to match other igb drivers.
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Bump version to match other igbvf drivers.
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Fixes the following sparse warning:
drivers/net/ethernet/intel/igb/igb_ethtool.c:2707:5: warning:
symbol 'igb_rxnfc_write_vlan_prio_filter' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
they used to be used, but...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Export the base definitions and the xattr representation of POSIX ACLs
to user space.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Remove the unnecessary typedefs and the zero-length a_entries array in
struct posix_acl_xattr_header.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Using a local variable we can prevent gcc from reloading
aio_ring_file->f_inode->i_mapping twice, eliminating 2x2 dependent
loads.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The actual definition in fs/nsfs.c is already const.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
into drm-next
Last set of radeon and amdgpu changes for 4.9. This is
mostly just the powerplay cleanup for dGPUs. Beyond that,
just misc code cleanups and bug fixes.
* 'drm-next-4.9' of git://people.freedesktop.org/~agd5f/linux: (49 commits)
drm/amd/amdgpu: Clean up afmt allocation in DCEv6. (v2)
drm/amd/amdgpu: Remove division from vblank_wait
drm/radeon/atif: Send a hotplug event when we get dgpu display request
drm/radeon/atpx: check for ATIF dGPU wake for display events support
drm/amdgpu/atif: Send a hotplug event when we get dgpu display request
drm/amdgpu/atpx: check for ATIF dGPU wake for display events support
drm/amdgpu: bump version for new vce packet support
drm/amdgpu/vce: allow the clock table packet
drm/amdgpu:cleanup virt related define
drm/amdgpu: use powerplay module for dgpu in Vi.
drm/amdgpu: set gfx clock gating for tonga/polaris.
drm/amdgpu: set system clock gating for tonga/polaris.
drm/amd/powerplay: export function to help to set cg by smu.
drm/amdgpu: avoid out of bounds access on array interrupt_status_offsets
drm/amdgpu: mark symbols static where possible
drm/amdgpu: remove unused functions
drm/amd/powerplay: Replace per-asic print_performance with generic
drm/radeon: narrow asic_init for virtualization
drm/amdgpu:add fw version entry to info
drm/amdgpu:determine if vPost is needed indeed
...
|
|
into drm-next
Notable changes:
- Cleanups from Fabio to some error paths and proper error propagation.
- Lots of refactoring and new code to support the new MMU version 2,
still relatively unoptimized and doesn't yet provide better process
isolation than MMUv1, but enough to get newer cores up and running.
- New hardware support: GC3000, as found on the NXP i.MX6 QuadPlus SoC.
* 'drm-etnaviv-next' of git://git.pengutronix.de/git/lst/linux: (25 commits)
drm/etnaviv: mark whole context as lost in recover worker
drm/etnaviv: record correct cmdbuf IOVA in dump
drm/etnaviv: space out IOVA layout for cmdbufs on MMUv2
drm/etnaviv: fix up model and revision for GC2000+
drm/etnaviv: implement IOMMUv2 translation
drm/etnaviv: handle MMU exception in IRQ handler
drm/etnaviv: add flushing logic for MMUv2
drm/etnaviv: add function to construct MMUv2 init buffer
drm/etnaviv: map cmdbuf through MMU on version 2
drm/etnaviv: split out iova search and MMU reaping logic
drm/etnaviv: split out FE start
drm/etnaviv: split out wait for gpu idle
drm/etnaviv: move gpu_va() to etnaviv mmu
drm/etnaviv: remove unused iommu_v2 header
drm/etnaviv: move IOMMU domain allocation into etnaviv MMU
drm/etnaviv: indirect IOMMU restore through etnaviv MMU
drm/etnaviv: move linear window setup into etnaviv_iommuv1_restore
drm/etnaviv: rename etnaviv_iommu_domain_restore to etnaviv_iommuv1_restore
drm/etnaviv: only check if the cmdbuf is inside the linear window on MMUv1
drm/etnaviv: only try to use the linear window on MMUv1
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-next
Allwinner sun4i DRM fixes for 4.9
A few fixes for the sun4i drm driver that range, including some fixes that
might prevent multiple planes from working depending on the sequence where
they are enabled.
* tag 'sunxi-drm-fixes-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
drm/sun4i: Fix the high buffer address mask
drm/sun4i: tv: Check mode pointer
drm/sun4i: Fix formats usable by the primary plane
drm/sun4i: dotclock: Round to closest clock rate
drm/sun4i: Fix sparse warnings
drm/sun4i: dotclock: Allow divider = 127
drm/sun4i: dotclock: Fix clock rate read back calcation
drm/sun4i: backend: remove redundant dev_err call in sun4i_backend_bind()
|
|
into drm-next
I've included some improvements to PSR from myself, as well as a great
series from Tomasz to clean up and tighten up vblank/flip handling.
The last patch is one from Tomeu that has been floating around for a
while, and since rockchip is one of the beneficiaries, I figured this
would be a good place to pick it up.
* 'for-next' of ssh://people.freedesktop.org/~seanpaul/dogwood:
drm/rockchip: Balance irq refcount on failure
drm/rockchip: Kill vop_plane_state
drm/rockchip: Always signal event in next vblank after cfg_done
drm/rockchip: Do not enable vblank without event
drm/rockchip: Replace custom wait_for_vblanks with helper
drm/rockchip: Unreference framebuffers from flip work
drm/rockchip: Avoid race with vblank count increment
drm/rockchip: Get rid of some unnecessary code
drm/rockchip: Clear interrupt status bits before enabling
drm/rockchip: Fix up bug in psr state machine
drm/bridge: analogix_dp: Remove duplicated code
drm/rockchip: Reduce psr flush time to 100ms
drm/rockchip: Don't key off vblank for psr
|
|
After 7e8e385aaf6e ("x86/compat: Remove sys32_vm86_warning"), this
function has become unused, so we can remove it as well.
Link: http://lkml.kernel.org/r/20160617142903.3070388-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Second attempt for 3rd drm/tilcdc pull request for v4.9.
* tag 'tilcdc-4.9-3.1' of https://github.com/jsarha/linux:
drm/tilcdc: fix wrong error handling
drm/tilcdc: Return directly after a failed kfree_table_init() in tilcdc_convert_slave_node()
drm/tilcdc: Remove "default" from blue-and-red-wiring property binding
drm/tilcdc: Fix non static symbol warning
drm/tilcdc: mark symbols static where possible
drm/tilcdc: add missing header dependencies
drm/tilcdc: WARN if CRTC is touched without CRTC lock
drm/tilcdc: Take CRTC lock when calling tilcdc_crtc_disable()
drm/tilcdc: Remove unnecessary tilcdc_crtc_disable() from tilcdc_unload()
drm/tilcdc: Flush flip-work workqueue before drm_flip_work_cleanup()
drm/tilcdc: Clean up LCDC functional clock rate setting code
drm/tilcdc: Take crtc modeset lock while updating the crtc clock rate
|
|
drivers/platform/x86/dell-smo8800.c is touched due to the following obscenity:
drivers/platform/x86/dell-smo8800.c ->
linux/interrupt.h ->
linux/hardirq.h ->
asm/hardirq.h ->
linux/irq.h ->
asm/hw_irq.h ->
asm/sections.h ->
asm/uaccess.h
is the only chain of includes pulling asm/uaccess.h there.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
It was introduced in "arch, x86: pmem api for ensuring durability
of persistent memory updates" in July 2015, along with the code
that really used that stuff. Three weeks later all that code
got moved to asm/pmem.h by "pmem, x86: move x86 PMEM API to new
pmem.h header"; include, however, was left behind.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The only reason it used to be needed had been a (bogus) use of
set_fs() in start_thread() and that got removed in 2011...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The only remaining users are issuing SIOCGMIIPHY and SIOCGMIIREG,
neither of which deals with userland pointers. Simply calling
->ndo_do_ioctl() is fine; no messing with set_fs() is needed.
It used to mess with SIOCETHTOOL, which would've needed set_fs(),
but that has been killed in "[NET] ethtool ops are the only way"
9 years ago...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|