| Age | Commit message (Collapse) | Author |
|---|
|
Add a helper function called thermal_trip_crossed() to be invoked by
__thermal_zone_device_update() in order to notify user space, the
thermal debug code and the zone governor about trip crossing.
Subsequently, this will also be used in the case when a trip point
becomes invalid after being crossed on the way up.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit a6258fde8de3 ("thermal/debugfs: Make tze_seq_show() skip invalid
trips and trips with no stats") modified tze_seq_show() to skip invalid
trips, but it overlooked the fact that a trip may become invalid during
a mitigation eposide involving it, in which case its statistics should
still be reported.
For this reason, remove the invalid trip temperature check from the
main loop in tze_seq_show().
The trips that have never been valid will still be skipped after this
change because there are no statistics to report for them.
Fixes: a6258fde8de3 ("thermal/debugfs: Make tze_seq_show() skip invalid trips and trips with no stats")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The temperature and hysteresis of a trip point may change during a
mitigation episode it is involved in (it may even become invalid
altogether), so in order to avoid possible confusion related to that,
store the temperature and hysteresis of trip points at the time they
are crossed on the way up and print those values instead of their
current temperature and hysteresis.
Fixes: 7ef01f228c9f ("thermal/debugfs: Add thermal debugfs information for mitigation episodes")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
LED Select (LED_SEL) bit in the LED General Purpose IO Configuration
register is used to determine the functionality of external LED pins
(Speed Indicator, Link and Activity Indicator, Full Duplex Link
Indicator). The default value for this bit is 0 when no EEPROM is
present. If a EEPROM is present, the default value is the value of the
LED Select bit in the Configuration Flags of the EEPROM. A USB Reset or
Lite Reset (LRST) will cause this bit to be restored to the image value
last loaded from EEPROM, or to be set to 0 if no EEPROM is present.
While configuring the dual purpose GPIO/LED pins to LED outputs in the
LED General Purpose IO Configuration register, the LED_SEL bit is changed
as 0 and resulting the configured value from the EEPROM is cleared. The
issue is fixed by using read-modify-write approach.
Fixes: f293501c61c5 ("smsc95xx: configure LED outputs")
Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Woojung Huh <woojung.huh@microchip.com>
Link: https://lore.kernel.org/r/20240523085314.167650-1-Parthiban.Veerasooran@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If an error code other than EINVAL, ENODEV or ETIME is returned
by acpi_ec_read() / acpi_ec_write(), then AE_OK is incorrectly
returned by acpi_ec_space_handler().
Fix this by only returning AE_OK on success, and return AE_ERROR
otherwise.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When a multi-byte address space access is requested, acpi_ec_read()/
acpi_ec_write() is being called multiple times.
Abort such operations if a single call to acpi_ec_read() /
acpi_ec_write() fails, as the data read from / written to the EC
might be incomplete.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The platform driver conversion of EINJ mistakenly used
platform_device_del() to unwind platform_device_register_full() at
module exit. This leads to a small leak of one 'struct platform_device'
instance per module load/unload cycle. Switch to
platform_device_unregister() which performs both device_del() and final
put_device().
Fixes: 5621fafaac00 ("EINJ: Migrate to a platform driver")
Cc: 6.9+ <stable@vger.kernel.org> # 6.9+
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ben Cheatham <Benjamin.Cheatham@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Don't open-code what the kernel already provides.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
An internal user complained about log recovery failing on a symlink
("Bad dinode after recovery") with the following (excerpted) format:
core.magic = 0x494e
core.mode = 0120777
core.version = 3
core.format = 2 (extents)
core.nlinkv2 = 1
core.nextents = 1
core.size = 297
core.nblocks = 1
core.naextents = 0
core.forkoff = 0
core.aformat = 2 (extents)
u3.bmx[0] = [startoff,startblock,blockcount,extentflag]
0:[0,12,1,0]
This is a symbolic link with a 297-byte target stored in a disk block,
which is to say this is a symlink with a remote target. The forkoff is
0, which is to say that there's 512 - 176 == 336 bytes in the inode core
to store the data fork.
Eventually, testing of generic/388 failed with the same inode corruption
message during inode recovery. In writing a debugging patch to call
xfs_dinode_verify on dirty inode log items when we're committing
transactions, I observed that xfs/298 can reproduce the problem quite
quickly.
xfs/298 creates a symbolic link, adds some extended attributes, then
deletes them all. The test failure occurs when the final removexattr
also deletes the attr fork because that does not convert the remote
symlink back into a shortform symlink. That is how we trip this test.
The only reason why xfs/298 only triggers with the debug patch added is
that it deletes the symlink, so the final iflush shows the inode as
free.
I wrote a quick fstest to emulate the behavior of xfs/298, except that
it leaves the symlinks on the filesystem after inducing the "corrupt"
state. Kernels going back at least as far as 4.18 have written out
symlink inodes in this manner and prior to 1eb70f54c445f they did not
object to reading them back in.
Because we've been writing out inodes this way for quite some time, the
only way to fix this is to relax the check for symbolic links.
Directories don't have this problem because di_size is bumped to
blocksize during the sf->data conversion.
Fixes: 1eb70f54c445f ("xfs: validate inode fork size against fork format")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
When we were converting the attr code to use an explicit operation code
instead of keying off of attr->value being null, we forgot to change the
code that initializes the transaction reservation. Split the function
into two helpers that handle the !remove and remove cases, then fix both
callsites to handle this correctly.
Fixes: c27411d4c640 ("xfs: make attr removal an explicit operation")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Chandan Babu reports the following livelock in xfs/708:
run fstests xfs/708 at 2024-05-04 15:35:29
XFS (loop16): EXPERIMENTAL online scrub feature in use. Use at your own risk!
XFS (loop5): Mounting V5 Filesystem e96086f0-a2f9-4424-a1d5-c75d53d823be
XFS (loop5): Ending clean mount
XFS (loop5): Quotacheck needed: Please wait.
XFS (loop5): Quotacheck: Done.
XFS (loop5): EXPERIMENTAL online scrub feature in use. Use at your own risk!
INFO: task xfs_io:143725 blocked for more than 122 seconds.
Not tainted 6.9.0-rc4+ #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:xfs_io state:D stack:0 pid:143725 tgid:143725 ppid:117661 flags:0x00004006
Call Trace:
<TASK>
__schedule+0x69c/0x17a0
schedule+0x74/0x1b0
io_schedule+0xc4/0x140
folio_wait_bit_common+0x254/0x650
shmem_undo_range+0x9d5/0xb40
shmem_evict_inode+0x322/0x8f0
evict+0x24e/0x560
__dentry_kill+0x17d/0x4d0
dput+0x263/0x430
__fput+0x2fc/0xaa0
task_work_run+0x132/0x210
get_signal+0x1a8/0x1910
arch_do_signal_or_restart+0x7b/0x2f0
syscall_exit_to_user_mode+0x1c2/0x200
do_syscall_64+0x72/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The shmem code is trying to drop all the folios attached to a shmem
file and gets stuck on a locked folio after a bnobt repair. It looks
like the process has a signal pending, so I started looking for places
where we lock an xfile folio and then deal with a fatal signal.
I found a bug in xfarray_sort_scan via code inspection. This function
is called to set up the scanning phase of a quicksort operation, which
may involve grabbing a locked xfile folio. If we exit the function with
an error code, the caller does not call xfarray_sort_scan_done to put
the xfile folio. If _sort_scan returns an error code while si->folio is
set, we leak the reference and never unlock the folio.
Therefore, change xfarray_sort to call _scan_done on exit. This is safe
to call multiple times because it sets si->folio to NULL and ignores a
NULL si->folio. Also change _sort_scan to use an intermediate variable
so that we never pollute si->folio with an errptr.
Fixes: 232ea052775f9 ("xfs: enable sorting of xfile-backed arrays")
Reported-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
In both xfs_alloc_cur_finish() and xfs_alloc_ag_vextent_exact(), local
variable @afg is tagged as __maybe_unused. Otherwise an unused variable
warning would be generated for when building with W=1 and CONFIG_XFS_DEBUG
unset. In both cases, the variable is unused as it is only referenced in
an ASSERT() call, which is compiled out (in this config).
It is generally a poor programming style to use __maybe_unused for
variables.
The ASSERT() call is to verify that agbno of the end of the extent is
within bounds for both functions. @afg is used as an intermediate variable
to find the AG length.
However xfs_verify_agbext() already exists to verify a valid extent range.
The arguments for calling xfs_verify_agbext() are already available, so use
that instead.
An advantage of using xfs_verify_agbext() is that it verifies that both the
start and the end of the extent are within the bounds of the AG and
catches overflows.
Suggested-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
For CONFIG_XFS_DEBUG unset, xfs_iwalk_run_callbacks() generates the
following warning for when building with W=1:
fs/xfs/xfs_iwalk.c: In function ‘xfs_iwalk_run_callbacks’:
fs/xfs/xfs_iwalk.c:354:42: error: variable ‘irec’ set but not used [-Werror=unused-but-set-variable]
354 | struct xfs_inobt_rec_incore *irec;
| ^~~~
cc1: all warnings being treated as errors
Drop @irec, as it is only an intermediate variable.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
There are two type of classes. "Leaf classes" that are the
bottom of the class hierarchy. "Inner classes" that are neither
the root class nor leaf classes. QoS rules can only specify leaf
classes as targets for traffic.
Root
/ \
/ \
1 2
/\
/ \
4 5
classes 1,4 and 5 are leaf classes.
class 2 is a inner class.
When a leaf class made as inner, or vice versa, resources associated
with send queue (send queue buffers and transmit schedulers) are not
getting freed.
Fixes: 5e6808b4c68d ("octeontx2-pf: Add support for HTB offload")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://lore.kernel.org/r/20240523073626.4114-1-hkelam@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
syzkaller reported data-race of sk->sk_hash in unix_autobind() [0],
and the same ones exist in unix_bind_bsd() and unix_bind_abstract().
The three bind() functions prefetch sk->sk_hash locklessly and
use it later after validating that unix_sk(sk)->addr is NULL under
unix_sk(sk)->bindlock.
The prefetched sk->sk_hash is the hash value of unbound socket set
in unix_create1() and does not change until bind() completes.
There could be a chance that sk->sk_hash changes after the lockless
read. However, in such a case, non-NULL unix_sk(sk)->addr is visible
under unix_sk(sk)->bindlock, and bind() returns -EINVAL without using
the prefetched value.
The KCSAN splat is false-positive, but let's silence it by reading
sk->sk_hash under unix_sk(sk)->bindlock.
[0]:
BUG: KCSAN: data-race in unix_autobind / unix_autobind
write to 0xffff888034a9fb88 of 4 bytes by task 4468 on cpu 0:
__unix_set_addr_hash net/unix/af_unix.c:331 [inline]
unix_autobind+0x47a/0x7d0 net/unix/af_unix.c:1185
unix_dgram_connect+0x7e3/0x890 net/unix/af_unix.c:1373
__sys_connect_file+0xd7/0xe0 net/socket.c:2048
__sys_connect+0x114/0x140 net/socket.c:2065
__do_sys_connect net/socket.c:2075 [inline]
__se_sys_connect net/socket.c:2072 [inline]
__x64_sys_connect+0x40/0x50 net/socket.c:2072
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x4f/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x46/0x4e
read to 0xffff888034a9fb88 of 4 bytes by task 4465 on cpu 1:
unix_autobind+0x28/0x7d0 net/unix/af_unix.c:1134
unix_dgram_connect+0x7e3/0x890 net/unix/af_unix.c:1373
__sys_connect_file+0xd7/0xe0 net/socket.c:2048
__sys_connect+0x114/0x140 net/socket.c:2065
__do_sys_connect net/socket.c:2075 [inline]
__se_sys_connect net/socket.c:2072 [inline]
__x64_sys_connect+0x40/0x50 net/socket.c:2072
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x4f/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x46/0x4e
value changed: 0x000000e4 -> 0x000001e3
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 4465 Comm: syz-executor.0 Not tainted 6.8.0-12822-gcd51db110a7e #12
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Fixes: afd20b9290e1 ("af_unix: Replace the big lock with small locks.")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240522154218.78088-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Once unix_sk(sk)->addr is assigned under net->unx.table.locks and
unix_sk(sk)->bindlock, *(unix_sk(sk)->addr) and unix_sk(sk)->path are
fully set up, and unix_sk(sk)->addr is never changed.
unix_getname() and unix_copy_addr() access the two fields locklessly,
and commit ae3b564179bf ("missing barriers in some of unix_sock ->addr
and ->path accesses") added smp_store_release() and smp_load_acquire()
pairs.
In other functions, we still read unix_sk(sk)->addr locklessly to check
if the socket is bound, and KCSAN complains about it. [0]
Given these functions have no dependency for *(unix_sk(sk)->addr) and
unix_sk(sk)->path, READ_ONCE() is enough to annotate the data-race.
Note that it is safe to access unix_sk(sk)->addr locklessly if the socket
is found in the hash table. For example, the lockless read of otheru->addr
in unix_stream_connect() is safe.
Note also that newu->addr there is of the child socket that is still not
accessible from userspace, and smp_store_release() publishes the address
in case the socket is accept()ed and unix_getname() / unix_copy_addr()
is called.
[0]:
BUG: KCSAN: data-race in unix_bind / unix_listen
write (marked) to 0xffff88805f8d1840 of 8 bytes by task 13723 on cpu 0:
__unix_set_addr_hash net/unix/af_unix.c:329 [inline]
unix_bind_bsd net/unix/af_unix.c:1241 [inline]
unix_bind+0x881/0x1000 net/unix/af_unix.c:1319
__sys_bind+0x194/0x1e0 net/socket.c:1847
__do_sys_bind net/socket.c:1858 [inline]
__se_sys_bind net/socket.c:1856 [inline]
__x64_sys_bind+0x40/0x50 net/socket.c:1856
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x4f/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x46/0x4e
read to 0xffff88805f8d1840 of 8 bytes by task 13724 on cpu 1:
unix_listen+0x72/0x180 net/unix/af_unix.c:734
__sys_listen+0xdc/0x160 net/socket.c:1881
__do_sys_listen net/socket.c:1890 [inline]
__se_sys_listen net/socket.c:1888 [inline]
__x64_sys_listen+0x2e/0x40 net/socket.c:1888
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x4f/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x46/0x4e
value changed: 0x0000000000000000 -> 0xffff88807b5b1b40
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 13724 Comm: syz-executor.4 Not tainted 6.8.0-12822-gcd51db110a7e #12
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240522154002.77857-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The hsr_ping test reports the following errors:
INFO: preparing interfaces for HSRv0.
INFO: Initial validation ping.
INFO: Longer ping test.
INFO: Cutting one link.
INFO: Delay the link and drop a few packages.
INFO: All good.
INFO: preparing interfaces for HSRv1.
RTNETLINK answers: File exists
RTNETLINK answers: File exists
RTNETLINK answers: File exists
RTNETLINK answers: File exists
RTNETLINK answers: File exists
RTNETLINK answers: File exists
Error: ipv4: Address already assigned.
Error: ipv6: address already assigned.
Error: ipv4: Address already assigned.
Error: ipv6: address already assigned.
Error: ipv4: Address already assigned.
Error: ipv6: address already assigned.
INFO: Initial validation ping.
That is because the cleanup code for the 2nd round test before
"setup_hsr_interfaces 1" is removed incorrectly in commit 680fda4f6714
("test: hsr: Remove script code already implemented in lib.sh").
This patch fixes it by re-setup the namespaces using
setup_ns ns1 ns2 ns3
command before "setup_hsr_interfaces 1". It deletes previous namespaces
and create new ones.
Fixes: 680fda4f6714 ("test: hsr: Remove script code already implemented in lib.sh")
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/6485d3005f467758d49f0f313c8c009759ba6b05.1716374462.git.tanggeliang@kylinos.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The "EZpad 6s Pro" uses the same touchscreen as the "EZpad 6 Pro B",
unlike the "Ezpad 6 Pro" which has its own touchscreen.
Signed-off-by: hmtheboy154 <buingoc67@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240527091447.248849-3-hdegoede@redhat.com
|
|
This is a tablet created by GlobalSpace Technologies Limited
which uses an Intel Atom x5-Z8300, 4GB of RAM & 64GB of storage.
Link: https://web.archive.org/web/20171102141952/http://globalspace.in/11.6-device.html
Signed-off-by: hmtheboy154 <buingoc67@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240527091447.248849-2-hdegoede@redhat.com
|
|
properties from cmdline
On x86/ACPI platforms touchscreens mostly just work without needing any
device/model specific configuration. But in some cases (mostly with Silead
and Goodix touchscreens) it is still necessary to manually specify various
touchscreen-properties on a per model basis.
touchscreen_dmi is a special place for DMI quirks for this, but it can be
challenging for users to figure out the right property values, especially
for Silead touchscreens where non of these can be read back from
the touchscreen-controller.
ATM users can only test touchscreen properties by editing touchscreen_dmi.c
and then building a completely new kernel which makes it unnecessary
difficult for users to test and submit properties when necessary for their
laptop / tablet model.
Add support for specifying properties on the kernel commandline to allow
users to easily figure out the right settings. See the added documentation
in kernel-parameters.txt for the commandline syntax.
Cc: Gregor Riepl <onitake@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240523143601.47555-1-hdegoede@redhat.com
|
|
Fixes an error where debugfs_remove_recursive() is called first on a parent
directory and then again on a child which causes a kernel panic.
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 0ab13674a9bd ("media: pci: mgb4: Added Digiteq Automotive MGB4 driver")
Cc: <stable@vger.kernel.org>
[hverkuil: added Fixes/Cc tags]
|
|
Now that drivers/platform/x86/thinkpad_acpi.c uses
sparse_keymap_report_event(), it must select INPUT_SPARSEKMAP in its
Kconfig option otherwise the build fails with:
ld: vmlinux.o: in function `tpacpi_input_send_key':
thinkpad_acpi.c:(.text+0xd4d27f): undefined reference to `sparse_keymap_report_event'
ld: vmlinux.o: in function `hotkey_init':
thinkpad_acpi.c:(.init.text+0x66cb6): undefined reference to `sparse_keymap_setup'
Fixes: 42f7b965de9d ("platform/x86: thinkpad_acpi: Switch to using sparse-keymap helpers")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240522074813.379b9fc2@gandalf.local.home
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Since the x86-android-tablets now calls devm_led_classdev_register_ext()
it needs to select LEDS_CLASS as well as LEDS_CLASS' NEW_LEDS dependency.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202405182256.FsKBjIzG-lkp@intel.com/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240521094741.273397-1-hdegoede@redhat.com
|
|
In tpmi_sst_dev_remove(), tpmi_sst is dereferenced after being freed.
Fix this by reordering the kfree() post the dereference.
Fixes: 9d1d36268f3d ("platform/x86: ISST: Support partitioned systems")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20240517144946.289615-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
enic_set_vf_port assumes that the nl attribute IFLA_PORT_PROFILE
is of length PORT_PROFILE_MAX and that the nl attributes
IFLA_PORT_INSTANCE_UUID, IFLA_PORT_HOST_UUID are of length PORT_UUID_MAX.
These attributes are validated (in the function do_setlink in rtnetlink.c)
using the nla_policy ifla_port_policy. The policy defines IFLA_PORT_PROFILE
as NLA_STRING, IFLA_PORT_INSTANCE_UUID as NLA_BINARY and
IFLA_PORT_HOST_UUID as NLA_STRING. That means that the length validation
using the policy is for the max size of the attributes and not on exact
size so the length of these attributes might be less than the sizes that
enic_set_vf_port expects. This might cause an out of bands
read access in the memcpys of the data of these
attributes in enic_set_vf_port.
Fixes: f8bd909183ac ("net: Add ndo_{set|get}_vf_port support for enic dynamic vnics")
Signed-off-by: Roded Zats <rzats@paloaltonetworks.com>
Link: https://lore.kernel.org/r/20240522073044.33519-1-rzats@paloaltonetworks.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit b8b8b4e0c052 ("ata: ahci: Add Intel Alder Lake-P AHCI controller
to low power chipsets list") added Intel Alder Lake to the ahci_pci_tbl.
Because of the way that the Intel PCS quirk was implemented, having
an explicit entry in the ahci_pci_tbl caused the Intel PCS quirk to
be applied. (The quirk was not being applied if there was no explict
entry.)
Thus, entries that were added to the ahci_pci_tbl also got the Intel
PCS quirk applied.
The quirk was cleaned up in commit 7edbb6059274 ("ahci: clean up
intel_pcs_quirk"), such that it is clear which entries that actually
applies the Intel PCS quirk.
Newer Intel AHCI controllers do not need the Intel PCS quirk,
and applying it when not needed actually breaks some platforms.
Do not apply the Intel PCS quirk for Intel Alder Lake.
This is in line with how things worked before commit b8b8b4e0c052 ("ata:
ahci: Add Intel Alder Lake-P AHCI controller to low power chipsets list"),
such that certain platforms using Intel Alder Lake will work once again.
Cc: stable@vger.kernel.org # 6.7
Fixes: b8b8b4e0c052 ("ata: ahci: Add Intel Alder Lake-P AHCI controller to low power chipsets list")
Signed-off-by: Jason Nader <dev@kayoway.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
The 2024 ASUS ROG G814J model is much the same as the 2023 model
and the 2023 16" version. We can use the same Cirrus Amp quirk.
Fixes: 811dd426a9b1 ("ALSA: hda/realtek: Add quirks for Asus ROG 2024 laptops using CS35L41")
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20240526091032.114545-1-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The card-specific debugfs entries are removed at the last stage of
card free phase, and it's performed after synchronization of the
closes of all opened fds. This works fine for most cases, but it can
be potentially problematic for a hotplug device like USB-audio. Due
to the nature of snd_card_free_when_closed(), the card free isn't
called immediately after the driver removal for a hotplug device, but
it's left until the last fd is closed. It implies that the card
debugfs entries also remain. Meanwhile, when a new device is inserted
before the last close and the very same card slot is assigned, the
driver tries to create the card debugfs root again on the very same
path. This conflicts with the remaining entry, and results in the
kernel warning such as:
debugfs: Directory 'card0' with parent 'sound' already present!
with the missing debugfs entry afterwards.
For avoiding such conflicts, remove debugfs entries at the device
disconnection phase instead. The jack kctl debugfs entries get
removed in snd_jack_dev_disconnect() instead of each kctl
private_free.
Fixes: 2d670ea2bd53 ("ALSA: jack: implement software jack injection via debugfs")
Link: https://lore.kernel.org/r/20240524151256.32521-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Fix the 'make W=1' warnings:
WARNING: modpost: missing MODULE_DESCRIPTION() in fs/smb/common/cifs_arc4.o
WARNING: modpost: missing MODULE_DESCRIPTION() in fs/smb/common/cifs_md4.o
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
buddy:
- stop using PAGE_SIZE
shmem-helper:
- avoid kernel panic in mmap()
tests:
- buddy: fix PAGE_SIZE dependency
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240523184745.GA11363@localhost.localdomain
|
|
copy_page_from_iter_atomic() will be removed at some point.
Also fixup a comment for folios.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Constifying "struct snd_soc_ops" moves some data to a read-only section, so
increase overall security.
This structure is also part of scripts/const_structs.checkpatch.
As an example, on a x86_64, with allmodconfig:
Before:
text data bss dec hex filename
6315 3696 0 10011 271b sound/soc/intel/boards/ehl_rt5660.o
After:
text data bss dec hex filename
6379 3648 0 10027 272b sound/soc/intel/boards/ehl_rt5660.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://msgid.link/r/2f0613bf4c6018569cdaac876d0589e49cf38a80.1715622793.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Replace SET_RUNTIME_PM_OPS() with its modern alternative RUNTIME_PM_OPS().
The combined usage of pm_ptr() and RUNTIME_PM_OPS() allows the
compiler to evaluate if the runtime suspend/resume() functions are used
at build time or are simply dead code.
This allows removing the __maybe_unused notation from the runtime
suspend/resume() functions.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://msgid.link/r/20240507173735.3456334-3-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Replace SET_RUNTIME_PM_OPS() with its modern alternative RUNTIME_PM_OPS().
The combined usage of pm_ptr() and RUNTIME_PM_OPS() allows the
compiler to evaluate if the runtime suspend/resume() functions are used
at build time or are simply dead code.
This allows removing the __maybe_unused notation from the runtime
suspend/resume() functions.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://msgid.link/r/20240507173735.3456334-2-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Replace SET_RUNTIME_PM_OPS() with its modern alternative RUNTIME_PM_OPS().
The combined usage of pm_ptr() and RUNTIME_PM_OPS() allows the
compiler to evaluate if the runtime suspend/resume() functions are used
at build time or are simply dead code.
This allows removing the __maybe_unused notation from the runtime
suspend/resume() functions.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://msgid.link/r/20240507173735.3456334-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Now that the soc-topology can handle "const struct snd_soc_tplg_ops" make
sure that new usages of the struct already enter the tree as const.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://msgid.link/r/6936369a414077265c11115c98364ae21e3cbdda.1715526069.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Constifying "struct snd_soc_tplg_ops" moves some data to a read-only
section, so increase overall security.
On a x86_64, with allmodconfig:
Before:
text data bss dec hex filename
44519 2888 48 47455 b95f sound/soc/sof/topology.o
After:
text data bss dec hex filename
44839 2552 48 47439 b94f sound/soc/sof/topology.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://msgid.link/r/2d9f5b75e979eb38b6f3baf85dfa1f0fdb3447ef.1715526069.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Constifying "struct snd_soc_tplg_ops" moves some data to a read-only
section, so increase overall security.
On a x86_64, with allmodconfig:
Before:
text data bss dec hex filename
58844 5282 56 64182 fab6 sound/soc/intel/skylake/skl-topology.o
After:
text data bss dec hex filename
59004 5122 56 64182 fab6 sound/soc/intel/skylake/skl-topology.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://msgid.link/r/48f096b6dc617ecf3ca53211c2a696a4df33b21a.1715526069.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Constifying "struct snd_soc_tplg_ops" moves some data to a read-only
section, so increase overall security.
On a x86_64, with allmodconfig:
Before:
text data bss dec hex filename
19942 832 0 20774 5126 sound/soc/qcom/qdsp6/topology.o
After:
text data bss dec hex filename
20102 652 0 20754 5112 sound/soc/qcom/qdsp6/topology.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://msgid.link/r/a5ae843dd8aaacbc1148aea7a3b1d03f11495872.1715526069.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Constifying "struct snd_soc_tplg_ops" moves some data to a read-only
section, so increase overall security.
On a x86_64, with allmodconfig:
Before:
text data bss dec hex filename
28046 794 0 28840 70a8 sound/soc/intel/avs/topology.o
After:
text data bss dec hex filename
28206 614 0 28820 7094 sound/soc/intel/avs/topology.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://msgid.link/r/01de0157088de0475970c79738284d6c86d702fe.1715526069.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
snd_soc_tplg_component_load() does not modify its "*ops" argument. It
only read some values and stores it in "soc_tplg.ops".
This argument and the ops field in "struct soc_tplg" can be made const.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://msgid.link/r/f2f983e791d7f941a95556bb147f426a345d84d4.1715526069.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The ACPI NHLT table always had 32-bit DMIC blob even if 16-bit was also
present and taken as a 'rule' which obviously got broken and there is at
least one device on the market which ships with only 16-bit DMIC
configuration blob.
This corner case has never been supported and it is going to need topology
updates for DMIC copier to support multiple formats.
As for the kernel side: if the copier supports multiple formats and the
preferred 32-bit DMIC blob is not found then we will try to get a 16-bit
DMIC configuration and look for a 16-bit copier config.
Fixes: f9209644ae76 ("ASoC: SOF: ipc4-topology: Correct DAI copier config and NHLT blob request")
Link: https://github.com/thesofproject/linux/issues/4973
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240516075611.18018-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Correct white-space issues and drop unused
WCD939X_MBHC_IS_SECOND_RAMP_REQUIRED() define. No functional impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240523104228.36263-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
All four microphone bias registers have similar layout: enable mask is
exactly the same. Use one define, just like older driver wcd938x is
doing, to make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240523104228.36263-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is a define for MIC bias registers enable mask called
WCD938X_MICB_EN_MASK, which is already used to handle all four MIC1-4
biases in wcd938x_mbhc_micb_adjust_voltage().
Use the same define also in wcd938x_mbhc_micb_en_status() for MIC2 to
have unified, simpler approach.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240523104228.36263-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
All MIC1-4 bias registers are the same and the header already defines
register fields for them. Drop unused, duplicated defines for MIC2
bias enable register.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240523104228.36263-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert ak4104 binding to DT schema
Signed-off-by: Xiaxi Shen <shenxiaxi26@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240517051317.466764-1-shenxiaxi26@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This is the initial amplifier driver for rt1320.
--
add class id 1
Signed-off-by: Shuming Fan <shumingf@realtek.com>
v2: add Capture DAI for AEC feedback
v3: add some comments for blind writes/patch_code/calling sdw_slave_read_prop
v4: add comments for different class id
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240521084625.453554-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
X1E80100 CRD board comes with four speakers arranged as left front+back
and then right front+back. Using default channel mapping causes front
right speaker to play left back stream.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240520-asoc-x1e80100-4-channel-mapping-v4-4-f657159b4aad@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When constructing packets to DSP, the Audioreach code uses 'struct
audioreach_module_config' to configure parameters like number of
channels, bitrate, sample rate etc, but uses defaults for the channel
mapping.
Rework this code to copy the channel mapping from 'struct
audioreach_module_config', instead of using the default. This requires
all callers to fill that structure: add missing initialization of
channel mapping.
Entire patch makes code more logical and easier to follow:
1. q6apm-dai and q6apm-lpass-dais code which allocates 'struct
audioreach_module_config' initializes it fully, so fills both
the number of channels and the channel mapping.
2. Audioreach code, which uses 'struct audioreach_module_config' when
constructing packets, copies entire contents of passed config, not
only pieces of it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240520-asoc-x1e80100-4-channel-mapping-v4-3-f657159b4aad@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
