summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-09-04sched: Make cpu_shares_read_u64() use tg_weight()Tejun Heo
Move tg_weight() upward and make cpu_shares_read_u64() use it too. This makes the weight retrieval shared between cgroup v1 and v2 paths and will be used to implement cgroup support for sched_ext. No functional changes. Signed-off-by: Tejun Heo <tj@kernel.org>
2024-09-04sched: Expose css_tg()Tejun Heo
A new BPF extensible sched_class will use css_tg() in the init and exit paths to visit all task_groups by walking cgroups. v4: __setscheduler_prio() is already exposed. Dropped from this patch. v3: Dropped SCHED_CHANGE_BLOCK() as upstream is adding more generic cleanup mechanism. v2: Expose SCHED_CHANGE_BLOCK() too and update the description. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: David Vernet <dvernet@meta.com> Acked-by: Josh Don <joshdon@google.com> Acked-by: Hao Luo <haoluo@google.com> Acked-by: Barret Rhoden <brho@google.com>
2024-09-04sched_ext: TASK_DEAD tasks must be switched into SCX on ops_enableTejun Heo
During scx_ops_enable(), SCX needs to invoke the sleepable ops.init_task() on every task. To do this, it does get_task_struct() on each iterated task, drop the lock and then call ops.init_task(). However, a TASK_DEAD task may already have lost all its usage count and be waiting for RCU grace period to be freed. If get_task_struct() is called on such task, use-after-free can happen. To avoid such situations, scx_ops_enable() skips initialization of TASK_DEAD tasks, which seems safe as they are never going to be scheduled again. Unfortunately, a racing sched_setscheduler(2) can grab the task before the task is unhashed and then continue to e.g. move the task from RT to SCX after TASK_DEAD is set and ops_enable skipped the task. As the task hasn't gone through scx_ops_init_task(), scx_ops_enable_task() called from switching_to_scx() triggers the following warning: sched_ext: Invalid task state transition 0 -> 3 for stress-ng-race-[2872] WARNING: CPU: 6 PID: 2367 at kernel/sched/ext.c:3327 scx_ops_enable_task+0x18f/0x1f0 ... RIP: 0010:scx_ops_enable_task+0x18f/0x1f0 ... switching_to_scx+0x13/0xa0 __sched_setscheduler+0x84e/0xa50 do_sched_setscheduler+0x104/0x1c0 __x64_sys_sched_setscheduler+0x18/0x30 do_syscall_64+0x7b/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e As in the ops_disable path, it just doesn't seem like a good idea to leave any task in an inconsistent state, even when the task is dead. The root cause is ops_enable not being able to tell reliably whether a task is truly dead (no one else is looking at it and it's about to be freed) and was testing TASK_DEAD instead. Fix it by testing the task's usage count directly. - ops_init no longer ignores TASK_DEAD tasks. As now all users iterate all tasks, @include_dead is removed from scx_task_iter_next_locked() along with dead task filtering. - tryget_task_struct() is added. Tasks are skipped iff tryget_task_struct() fails. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: David Vernet <void@manifault.com> Cc: Peter Zijlstra <peterz@infradead.org>
2024-09-04sched_ext: TASK_DEAD tasks must be switched out of SCX on ops_disableTejun Heo
scx_ops_disable_workfn() only switches !TASK_DEAD tasks out of SCX while calling scx_ops_exit_task() on all tasks including dead ones. This can leave a dead task on SCX but with SCX_TASK_NONE state, which is inconsistent. If another task was in the process of changing the TASK_DEAD task's scheduling class and grabs the rq lock after scx_ops_disable_workfn() is done with the task, the task ends up calling scx_ops_disable_task() on the dead task which is in an inconsistent state triggering a warning: WARNING: CPU: 6 PID: 3316 at kernel/sched/ext.c:3411 scx_ops_disable_task+0x12c/0x160 ... RIP: 0010:scx_ops_disable_task+0x12c/0x160 ... Call Trace: <TASK> check_class_changed+0x2c/0x70 __sched_setscheduler+0x8a0/0xa50 do_sched_setscheduler+0x104/0x1c0 __x64_sys_sched_setscheduler+0x18/0x30 do_syscall_64+0x7b/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f140d70ea5b There is no reason to leave dead tasks on SCX when unloading the BPF scheduler. Fix by making scx_ops_disable_workfn() eject all tasks including the dead ones from SCX. Signed-off-by: Tejun Heo <tj@kernel.org>
2024-09-04cpufreq/amd-pstate: Catch failures for amd_pstate_epp_update_limit()Mario Limonciello
amd_pstate_set_epp() calls cppc_set_epp_perf() which can fail for a variety of reasons but this is ignored. Change the return flow to allow failures. Reviewed-by: Perry Yuan <perry.yuan@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2024-09-04selftests: bpf: Replace sizeof(arr)/sizeof(arr[0]) with ARRAY_SIZEFeng Yang
The ARRAY_SIZE macro is more compact and more formal in linux source. Signed-off-by: Feng Yang <yangfeng@kylinos.cn> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20240903072559.292607-1-yangfeng59949@163.com
2024-09-04Merge branch 'bpf-follow-up-on-gen_epilogue'Alexei Starovoitov
Martin KaFai Lau says: ==================== bpf: Follow up on gen_epilogue From: Martin KaFai Lau <martin.lau@kernel.org> The set addresses some follow ups on the earlier gen_epilogue patch set. ==================== Acked-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20240904180847.56947-1-martin.lau@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-09-04bpf: Fix indentation issue in epilogue_idxMartin KaFai Lau
There is a report on new indentation issue in epilogue_idx. This patch fixed it. Fixes: 169c31761c8d ("bpf: Add gen_epilogue to bpf_verifier_ops") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202408311622.4GzlzN33-lkp@intel.com/ Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://lore.kernel.org/r/20240904180847.56947-3-martin.lau@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-09-04bpf: Remove the insn_buf array stack usage from the inline_bpf_loop()Martin KaFai Lau
This patch removes the insn_buf array stack usage from the inline_bpf_loop(). Instead, the env->insn_buf is used. The usage in inline_bpf_loop() needs more than 16 insn, so the INSN_BUF_SIZE needs to be increased from 16 to 32. The compiler stack size warning on the verifier is gone after this change. Cc: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://lore.kernel.org/r/20240904180847.56947-2-martin.lau@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-09-04Merge branch 'bpf-fix-incorrect-name-check-pass-logic-in-btf_name_valid_section'Alexei Starovoitov
Jeongjun Park says: ==================== bpf: fix incorrect name check pass logic in btf_name_valid_section This patch was written to fix an issue where btf_name_valid_section() would not properly check names with certain conditions and would throw an OOB vuln. And selftest was added to verify this patch. ==================== Link: https://lore.kernel.org/r/20240831054525.364353-1-aha310510@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-09-04selftests/bpf: Add a selftest to check for incorrect namesJeongjun Park
Add selftest for cases where btf_name_valid_section() does not properly check for certain types of names. Suggested-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Jeongjun Park <aha310510@gmail.com> Link: https://lore.kernel.org/r/20240831054742.364585-1-aha310510@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Eduard Zingerman <eddyz87@gmail.com>
2024-09-04perf check: Fix inconsistencies in feature namesAditya Gupta
Fix two inconsistencies in feature names as discussed in [1]: 1. Rename "dwarf-unwind-support" to "dwarf-unwind" 2. 'get_cpuid' feature and 'HAVE_AUXTRACE_SUPPORT' names don't look related, change the feature name to 'auxtrace' to match the macro name, as 'get_cpuid' string is not used anywhere to check the feature presence [1]: https://lore.kernel.org/linux-perf-users/ZoRw5we4HLSTZND6@x1/ Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Aditya Gupta <adityag@linux.ibm.com> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Disha Goel <disgoel@linux.vnet.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20240904190132.415212-7-adityag@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-09-04perf tests probe_vfs_getname.sh: Update to use 'perf check feature'Athira Rajeev
In probe_vfs_getname.sh, current we use "perf record --dry-run" to check for libtraceevent and skip the test if perf is not build with libtraceevent. Change the check to use "perf check feature" option Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Disha Goel <disgoel@linux.vnet.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20240904190132.415212-6-adityag@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-09-04perf tools test_task_analyzer.sh: Update to use 'perf check feature'Aditya Gupta
Currently we use output of 'perf version --build-options', to check whether perf was built with libtraceevent support. Instead, use 'perf check feature libtraceevent' to check for libtraceevent support. Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Aditya Gupta <adityag@linux.ibm.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Disha Goel <disgoel@linux.vnet.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20240904190132.415212-5-adityag@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-09-04perf version: Update --build-options to use 'supported_features' arrayAditya Gupta
Now that the feature list has been duplicated in a global 'supported_features' array, use that array instead of manually checking status of built-in features. This helps in being consistent with commands such as 'perf check feature', so commands can use the same array, and any new feature can be added at one place, in the 'supported_features' array Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Aditya Gupta <adityag@linux.ibm.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Disha Goel <disgoel@linux.vnet.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20240904190132.415212-4-adityag@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-09-04Merge tag 'perf-tools-fixes-for-v6.11-2024-09-04' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tools fixes from Namhyung Kim: "A number of small fixes for the late cycle: - Two more build fixes on 32-bit archs - Fixed a segfault during perf test - Fixed spinlock/rwlock accounting bug in perf lock contention" * tag 'perf-tools-fixes-for-v6.11-2024-09-04' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: perf daemon: Fix the build on more 32-bit architectures perf python: include "util/sample.h" perf lock contention: Fix spinlock and rwlock accounting perf test pmu: Set uninitialized PMU alias to null
2024-09-04Some clean up with helper fucntionMark Brown
Merge series from Zhang Zekun <zhangzekun11@huawei.com>: There are some helper functions which can be used to simplify the code. So, let's use these functions to make code more simple.
2024-09-04Merge tag 'hwmon-for-v6.11-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - hp-wmi-sensors: Check if WMI event data exists before accessing it - ltc2991: fix register bits defines * tag 'hwmon-for-v6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (hp-wmi-sensors) Check if WMI event data exists hwmon: ltc2991: fix register bits defines
2024-09-04ktest.pl: Avoid false positives with grub2 skip regexDaniel Jordan
Some distros have grub2 config files with the lines if [ x"${feature_menuentry_id}" = xy ]; then menuentry_id_option="--id" else menuentry_id_option="" fi which match the skip regex defined for grub2 in get_grub_index(): $skip = '^\s*menuentry'; These false positives cause the grub number to be higher than it should be, and the wrong kernel can end up booting. Grub documents the menuentry command with whitespace between it and the title, so make the skip regex reflect this. Link: https://lore.kernel.org/20240904175530.84175-1-daniel.m.jordan@oracle.com Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Acked-by: John 'Warthog9' Hawley (Tenstorrent) <warthog9@eaglescrag.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2024-09-04ktest.pl: Always warn on build warningsSteven Rostedt
If a warning happens at build, give a warning at the end: Build time: 1 minute 40 seconds Install time: 17 seconds Reboot time: 25 seconds *** WARNING found in build: 1 *** ******************************************* ******************************************* KTEST RESULT: TEST 1 SUCCESS!!!! ** ******************************************* ******************************************* This way, even if the test isn't made to fail on warnings during the build, a message is still displayed that warnings were found. Link: https://lore.kernel.org/<20240819172028.3a7fae09@gandalf.local.home> Acked-by: John 'Warthog9' Hawley (Tenstorrent) <warthog9@eaglescrag.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2024-09-04bpf: add check for invalid name in btf_name_valid_section()Jeongjun Park
If the length of the name string is 1 and the value of name[0] is NULL byte, an OOB vulnerability occurs in btf_name_valid_section() and the return value is true, so the invalid name passes the check. To solve this, you need to check if the first position is NULL byte and if the first character is printable. Suggested-by: Eduard Zingerman <eddyz87@gmail.com> Fixes: bd70a8fb7ca4 ("bpf: Allow all printable characters in BTF DATASEC names") Signed-off-by: Jeongjun Park <aha310510@gmail.com> Link: https://lore.kernel.org/r/20240831054702.364455-1-aha310510@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Eduard Zingerman <eddyz87@gmail.com>
2024-09-04samples/bpf: Remove sample tracex2Rong Tao
In commit ba8de796baf4 ("net: introduce sk_skb_reason_drop function") kfree_skb_reason() becomes an inline function and cannot be traced. samples/bpf is abandonware by now, and we should slowly but surely convert whatever makes sense into BPF selftests under tools/testing/selftests/bpf and just get rid of the rest. Link: https://github.com/torvalds/linux/commit/ba8de796baf4bdc03530774fb284fe3c97875566 Signed-off-by: Rong Tao <rongtao@cestc.cn> Link: https://lore.kernel.org/r/tencent_30ADAC88CB2915CA57E9512D4460035BA107@qq.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-09-04Merge tag 'for-6.11-rc6-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - followup fix for direct io and fsync under some conditions, reported by QEMU users - fix a potential leak when disabling quotas while some extent tracking work can still happen - in zoned mode handle unexpected change of zone write pointer in RAID1-like block groups, turn the zones to read-only * tag 'for-6.11-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix race between direct IO write and fsync when using same fd btrfs: zoned: handle broken write pointer on zones btrfs: qgroup: don't use extent changeset when not needed
2024-09-04arm64: dts: rockchip: remove duplicate nodes from dts for ROCK 4SEFUKAUMI Naoki
these nodes just define same properties in rk3399-rock-pi-4.dtsi. remove them from rk3399-rock-4se.dts. sha256sum rk3399-rock-4se.dtb generates same hash value before/after this change. Fixes: 86a0e14a82ea ("arm64: dts: rockchip: Add Radxa ROCK 4SE") Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Link: https://lore.kernel.org/r/20240903073544.2161-1-naoki@radxa.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-09-04selftests/bpf: Fix procmap_query()'s params mismatch and compilation warningYuan Chen
When the PROCMAP_QUERY is not defined, a compilation error occurs due to the mismatch of the procmap_query()'s params, procmap_query() only be called in the file where the function is defined, modify the params so they can match. We get a warning when build samples/bpf: trace_helpers.c:252:5: warning: no previous prototype for ‘procmap_query’ [-Wmissing-prototypes] 252 | int procmap_query(int fd, const void *addr, __u32 query_flags, size_t *start, size_t *offset, int *flags) | ^~~~~~~~~~~~~ As this function is only used in the file, mark it as 'static'. Fixes: 4e9e07603ecd ("selftests/bpf: make use of PROCMAP_QUERY ioctl if available") Signed-off-by: Yuan Chen <chenyuan@kylinos.cn> Link: https://lore.kernel.org/r/20240903012839.3178-1-chenyuan_fl@163.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-09-04bpf, arm64: Jit BPF_CALL to direct call when possibleXu Kuohai
Currently, BPF_CALL is always jited to indirect call. When target is within the range of direct call, BPF_CALL can be jited to direct call. For example, the following BPF_CALL call __htab_map_lookup_elem is always jited to indirect call: mov x10, #0xffffffffffff18f4 movk x10, #0x821, lsl #16 movk x10, #0x8000, lsl #32 blr x10 When the address of target __htab_map_lookup_elem is within the range of direct call, the BPF_CALL can be jited to: bl 0xfffffffffd33bc98 This patch does such jit optimization by emitting arm64 direct calls for BPF_CALL when possible, indirect calls otherwise. Without this patch, the jit works as follows. 1. First pass A. Determine jited position and size for each bpf instruction. B. Computed the jited image size. 2. Allocate jited image with size computed in step 1. 3. Second pass A. Adjust jump offset for jump instructions B. Write the final image. This works because, for a given bpf prog, regardless of where the jited image is allocated, the jited result for each instruction is fixed. The second pass differs from the first only in adjusting the jump offsets, like changing "jmp imm1" to "jmp imm2", while the position and size of the "jmp" instruction remain unchanged. Now considering whether to jit BPF_CALL to arm64 direct or indirect call instruction. The choice depends solely on the jump offset: direct call if the jump offset is within 128MB, indirect call otherwise. For a given BPF_CALL, the target address is known, so the jump offset is decided by the jited address of the BPF_CALL instruction. In other words, for a given bpf prog, the jited result for each BPF_CALL is determined by its jited address. The jited address for a BPF_CALL is the jited image address plus the total jited size of all preceding instructions. For a given bpf prog, there are clearly no BPF_CALL instructions before the first BPF_CALL instruction. Since the jited result for all other instructions other than BPF_CALL are fixed, the total jited size preceding the first BPF_CALL is also fixed. Therefore, once the jited image is allocated, the jited address for the first BPF_CALL is fixed. Now that the jited result for the first BPF_CALL is fixed, the jited results for all instructions preceding the second BPF_CALL are fixed. So the jited address and result for the second BPF_CALL are also fixed. Similarly, we can conclude that the jited addresses and results for all subsequent BPF_CALL instructions are fixed. This means that, for a given bpf prog, once the jited image is allocated, the jited address and result for all instructions, including all BPF_CALL instructions, are fixed. Based on the observation, with this patch, the jit works as follows. 1. First pass Estimate the maximum jited image size. In this pass, all BPF_CALLs are jited to arm64 indirect calls since the jump offsets are unknown because the jited image is not allocated. 2. Allocate jited image with size estimated in step 1. 3. Second pass A. Determine the jited result for each BPF_CALL. B. Determine jited address and size for each bpf instruction. 4. Third pass A. Adjust jump offset for jump instructions. B. Write the final image. Signed-off-by: Xu Kuohai <xukuohai@huawei.com> Reviewed-by: Puranjay Mohan <puranjay@kernel.org> Link: https://lore.kernel.org/r/20240903094407.601107-1-xukuohai@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-09-04arm64: dts: rockchip: Add GameForce AceChris Morgan
The GameForce Ace is a portable gaming device based on the Rockchip RK3588s SoC. The device contains the following hardware that is tested/working: - 128GB eMMC - SDMMC card slot - Ampak SDIO WiFi 5/BT - NVME 2242 socket - 8 or 12GB of RAM - Goodix based touchscreen - Stereo speakers, internal microphone, and TRRS headphone jack. - Dual GPIO vibrators (implemented as gpio-pwm because they are quite strong) - Multiple face buttons, dual analog joysticks, and dual analog triggers - PWM fan with tach pin. The device also contains the following hardware that is partially or currently not working: - 1920x1080 DSI display - HDMI port - USB-C port with DP alt-mode - TI bq25703 charger controller Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Link: https://lore.kernel.org/r/20240829204517.398669-4-macroalpha82@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-09-04dt-bindings: arm: rockchip: Add GameForce AceChris Morgan
Add devicetree binding for the GameForce Ace. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Link: https://lore.kernel.org/r/20240829204517.398669-3-macroalpha82@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-09-04arm64: dts: rockchip: rk3588s fix sdio pins to pull upAlex Zhao
The sdio requires the cmd and data pins to pull up by soc. Signed-off-by: Alex Zhao <zzc@rock-chips.com> [adapted to pinctrl filename change] Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Link: https://lore.kernel.org/r/20240829204517.398669-2-macroalpha82@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-09-04irqchip/apple-aic: Only access system registers on SoCs which provide themKonrad Dybcio
Starting from the A11 (T8015) SoC, Apple introuced system registers for fast IPI and UNCORE PMC control. These sysregs do not exist on earlier A7-A10 SoCs and trying to access them results in an instant crash. Restrict sysreg access within the AIC driver to configurations where use_fast_ipi is true to allow AIC to function properly on A7-A10 SoCs. Co-developed-by: Nick Chan <towinchenmi@gmail.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Nick Chan <towinchenmi@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Sven Peter <sven@svenpeter.dev> Link: https://lore.kernel.org/all/20240901034143.12731-5-towinchenmi@gmail.com
2024-09-04irqchip/apple-aic: Add a new "Global fast IPIs only" feature levelNick Chan
Starting with the A11 (T8015) SoC, Apple began using arm64 sysregs for fast IPIs. However, on A11, there is no such things as "Local" fast IPIs, as the SYS_IMP_APL_IPI_RR_LOCAL_EL1 register does not seem to exist. Add a new feature level, used by the compatible "apple,t8015-aic", controlled by a static branch key named use_local_fast_ipi. When use_fast_ipi is true and use_local_fast_ipi is false, fast IPIs are used but all IPIs goes through the register SYS_IMP_APL_IPI_RR_GLOBAL_EL1, as "global" IPIs. Signed-off-by: Nick Chan <towinchenmi@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Sven Peter <sven@svenpeter.dev> Link: https://lore.kernel.org/all/20240901034143.12731-4-towinchenmi@gmail.com
2024-09-04irqchip/apple-aic: Skip unnecessary enabling of use_fast_ipiNick Chan
use_fast_ipi is true by default and there is no need to "enable" it. Signed-off-by: Nick Chan <towinchenmi@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Sven Peter <sven@svenpeter.dev> Link: https://lore.kernel.org/all/20240901034143.12731-3-towinchenmi@gmail.com
2024-09-04dt-bindings: apple,aic: Document A7-A11 compatiblesNick Chan
Document and describe the compatibles for Apple A7-A11 SoCs. There are three feature levels: - apple,aic: No fast IPI, for A7-A10 - apple,t8015-aic: fast IPI, global only, for A11 - apple,t8103-aic: fast IPI with local and global support, for M1 Each feature level is an extension of the previous, for example, M1 will also work with the A7 feature level. All of A7-M1 gets its own SoC-specific compatible, and the "apple,aic" compatible as a fallback. Signed-off-by: Nick Chan <towinchenmi@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Sven Peter <sven@svenpeter.dev> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/all/20240901034143.12731-2-towinchenmi@gmail.com
2024-09-04arm64: dts: rockchip: Add RGA2 support to rk3588Jianfeng Liu
RK3588 also features a RGA2 block. Add the necessary device tree node. Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com> Tested-by: Tim Surber <me@timsurber.de> Link: https://lore.kernel.org/r/20240831182424.758816-2-liujianfeng1994@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-09-04arm64: dts: rockchip: Add missing tshut props to tsadc on quartz64-bDiederik de Haas
Add the missing TSADC properties `rockchip,hw-tshut-mode` and `rockchip,hw-tshut-polarity` to the Pine64 Quartz64 Model B. This fixes the following warnings: rockchip-thermal fe710000.tsadc: Missing tshut mode property, using default (gpio) rockchip-thermal fe710000.tsadc: Missing tshut-polarity property, using default (low) Signed-off-by: Diederik de Haas <didi.debian@cknow.org> Link: https://lore.kernel.org/r/20240831112949.60091-1-didi.debian@cknow.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-09-04platform/x86: thinkpad_acpi: Fix uninitialized symbol 's' warningMatthias Fetzer
When the TPACPI_FAN_WR_ACPI_FANW branch is taken s stays uninitialized and would be later used in a debug print. Since the registers are always set to the same two static values inside the branch s is initialized to 0. Fixes: 57d0557dfa49 ("platform/x86: thinkpad_acpi: Add Thinkpad Edge E531 fan support") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/platform-driver-x86/f99e558d-c62a-41eb-93b3-cf00c016d907@stanley.mountain/ Signed-off-by: Matthias Fetzer <kontakt@matthias-fetzer.de> Link: https://lore.kernel.org/r/20240903172756.19235-1-kontakt@matthias-fetzer.de Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-09-04arm64: dts: rockchip: Add Hardkernel ODROID-M2Jonas Karlman
The Hardkernel ODROID-M2 is a single-board computer based on Rockchip RK3588S2 SoC. It features e.g. 8/16 GB LPDDR5 RAM, 64 GB eMMC, SD-card, GbE LAN, HDMI 2.0, M.2 NVMe and USB 2.0/3.0/Type-C. Add initial support for eMMC, SD-card, Ethernet, PCIe and USB. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Link: https://lore.kernel.org/r/20240901112020.3224704-3-jonas@kwiboo.se Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-09-04dt-bindings: arm: rockchip: Add Hardkernel ODROID-M2Jonas Karlman
The Hardkernel ODROID-M2 is a single-board computer based on Rockchip RK3588S2 SoC. It features e.g. 8/16 GB LPDDR5 RAM, 64 GB eMMC, SD-card, GbE LAN, HDMI 2.0, M.2 NVMe and USB 2.0/3.0/Type-C. Add devicetree binding documentation for the Hardkernel ODROID-M2 board. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240901112020.3224704-2-jonas@kwiboo.se Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-09-04arm64: dts: rockchip: drop hp-pin-name property from audio card on nanopc-t6Heiko Stuebner
The audio-card contains a hp-pin-name property that is not part of the binding, and its contents also are just a "Headphones" string. So that property also does not fullfill any specific use, therefore just drop it. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20240830203819.1972536-4-heiko@sntech.de
2024-09-04platform/x86: x86-android-tablets: Fix spelling in the commentsAndy Shevchenko
Fix spelling across comments (besides obvious grammar issues): - spell words in full, e.g., 'img' --> 'image' - refer to 'gpio-keys' consistently - refer to acpi_power_off() clearly as to function - make sure that the first line is only for the affected model(s) - miscellaneous improvements Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240902150625.2722187-1-andriy.shevchenko@linux.intel.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-09-04platform/x86: ideapad-laptop: Make the scope_guard() clear of its scopeAndy Shevchenko
First of all, it's a bit counterintuitive to have something like int err; ... scoped_guard(...) err = foo(...); if (err) return err; Second, with a particular kernel configuration and compiler version in one of such cases the objtool is not happy: ideapad-laptop.o: warning: objtool: .text.fan_mode_show: unexpected end of section I'm not an expert on all this, but the theory is that compiler and linker in this case can't understand that 'result' variable will be always initialized as long as no error has been returned. Assigning 'result' to a dummy value helps with this. Note, that fixing the scoped_guard() scope (as per above) does not make issue gone. That said, assign dummy value and make the scope_guard() clear of its scope. For the sake of consistency do it in the entire file. Fixes: 7cc06e729460 ("platform/x86: ideapad-laptop: add a mutex to synchronize VPC commands") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202408290219.BrPO8twi-lkp@intel.com/ Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240829165105.1609180-1-andriy.shevchenko@linux.intel.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-09-04platform/x86/intel-uncore-freq: Add efficiency latency control to sysfs ↵Tero Kristo
interface Add the TPMI efficiency latency control fields to the sysfs interface. The sysfs files are mapped to the TPMI uncore driver via the registered uncore_read and uncore_write driver callbacks. These fields are not populated on older non TPMI hardware. Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20240828153657.1296410-4-tero.kristo@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-09-04platform/x86/intel-uncore-freq: Add support for efficiency latency controlTero Kristo
Add efficiency latency control support to the TPMI uncore driver. This defines two new threshold values for controlling uncore frequency, low threshold and high threshold. When CPU utilization is below low threshold, the user configurable floor latency control frequency can be used by the system. When CPU utilization is above high threshold, the uncore frequency is increased in 100MHz steps until power limit is reached. Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20240828153657.1296410-3-tero.kristo@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-09-04Documentation: admin-guide: pm: Add efficiency vs. latency tradeoff to ↵Tero Kristo
uncore documentation Added documentation about the functionality of efficiency vs. latency tradeoff control in intel Xeon processors, and how this is configured via sysfs. Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20240828153657.1296410-2-tero.kristo@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-09-04platform/x86: lenovo-ymc: Ignore the 0x0 stateGergo Koteles
While booting, Lenovo 14ARB7 reports 'lenovo-ymc: Unknown key 0 pressed' warning. This is caused by lenovo_ymc_probe() calling lenovo_ymc_notify() at probe time to get the initial tablet-mode-switch state and the key-code lenovo_ymc_notify() reads from the firmware is not initialized at probe time yet on the Lenovo 14ARB7. The hardware/firmware does an ACPI notify on the WMI device itself when it initializes the tablet-mode-switch state later on. Add 0x0 YMC state to the sparse keymap to silence the warning. Signed-off-by: Gergo Koteles <soyer@irl.hu> Link: https://lore.kernel.org/r/08ab73bb74c4ad448409f2ce707b1148874a05ce.1724340562.git.soyer@irl.hu [hdegoede@redhat.com: Reword commit message] Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-09-04x86/platform/geode: switch GPIO buttons and LEDs to software propertiesDmitry Torokhov
Convert GPIO-connected buttons and LEDs in Geode boards to software nodes/properties, so that support for platform data can be removed from gpio-keys driver (which will rely purely on generic device properties for configuration). To avoid repeating the same data structures over and over and over factor them out into a new geode-common.c file. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/ZsV6MNS_tUPPSffJ@google.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-09-04ASoC: audio-graph-card2: Use helper function of_get_child_count()Zhang Zekun
of_get_child_count() can help to get the num of child directly and we don't need to manually count the child num. No functional change with this conversion. Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com> Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://patch.msgid.link/20240827070650.11424-3-zhangzekun11@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-04ASoC: audio-graph-card: Use for_each_child_of_node_scoped() to simplify codeZhang Zekun
for_each_child_of_node_scoped() can put the device_node automatically. So, using it to make the code logic more simple and remove the device_node clean up code. Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com> Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://patch.msgid.link/20240827070650.11424-2-zhangzekun11@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-04Merge tag 'v6.11-rc6-server-fixes' of git://git.samba.org/ksmbdLinus Torvalds
Pull smb server fixes from Steve French: - Fix crash in session setup - Fix locking bug - Improve access bounds checking * tag 'v6.11-rc6-server-fixes' of git://git.samba.org/ksmbd: ksmbd: Unlock on in ksmbd_tcp_set_interfaces() ksmbd: unset the binding mark of a reused connection smb: Annotate struct xattr_smb_acl with __counted_by()
2024-09-04Merge tag 'vfs-6.11-rc7.fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull vfs fixes from Christian Brauner: "Two netfs fixes for this merge window: - Ensure that fscache_cookie_lru_time is deleted when the fscache module is removed to prevent UAF - Fix filemap_invalidate_inode() to use invalidate_inode_pages2_range() Before it used truncate_inode_pages_partial() which causes copy_file_range() to fail on cifs" * tag 'vfs-6.11-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: fscache: delete fscache_cookie_lru_timer when fscache exits to avoid UAF mm: Fix filemap_invalidate_inode() to use invalidate_inode_pages2_range()
generated by cgit (git 2.34.1) at 2025-09-23 13:45:49 +0000