summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-03-06aoe: fix the potential use-after-free problem in aoecmd_cfg_pktsChun-Yi Lee
This patch is against CVE-2023-6270. The description of cve is: A flaw was found in the ATA over Ethernet (AoE) driver in the Linux kernel. The aoecmd_cfg_pkts() function improperly updates the refcnt on `struct net_device`, and a use-after-free can be triggered by racing between the free on the struct and the access through the `skbtxq` global queue. This could lead to a denial of service condition or potential code execution. In aoecmd_cfg_pkts(), it always calls dev_put(ifp) when skb initial code is finished. But the net_device ifp will still be used in later tx()->dev_queue_xmit() in kthread. Which means that the dev_put(ifp) should NOT be called in the success path of skb initial code in aoecmd_cfg_pkts(). Otherwise tx() may run into use-after-free because the net_device is freed. This patch removed the dev_put(ifp) in the success path in aoecmd_cfg_pkts(), and added dev_put() after skb xmit in tx(). Link: https://nvd.nist.gov/vuln/detail/CVE-2023-6270 Fixes: 7562f876cd93 ("[NET]: Rework dev_base via list_head (v3)") Signed-off-by: Chun-Yi Lee <jlee@suse.com> Link: https://lore.kernel.org/r/20240305082048.25526-1-jlee@suse.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-06i2c: rcar: Prepare for the advent of ARCH_RCAR_GEN4Geert Uytterhoeven
Currently, all Kconfig symbols for R-Car Gen4 SoCs select ARCH_RCAR_GEN3, which might confuse the casual reader. Prepare for the advent of ARCH_RCAR_GEN4 by extending the dependency for auto-selecting reset controller support. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-03-06i2c: imx-lpi2c: add generic GPIO recovery for LPI2CCarlos Song
This adds i2c bus recovery to the lpi2c driver. Uses the generic recovery function setting the SCL/SDA pads as GPIO pins and sending 9 clocks to try and recover the bus. Signed-off-by: Carlos Song <carlos.song@nxp.com> Reviewed-by: Clark Wang <xiaoning.wang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-03-06block: move capacity validation to blkpg_do_ioctl()Li Lingfeng
Commit 6d4e80db4ebe ("block: add capacity validation in bdev_add_partition()") add check of partition's start and end sectors to prevent exceeding the size of the disk when adding partitions. However, there is still no check for resizing partitions now. Move the check to blkpg_do_ioctl() to cover resizing partitions. Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20240305032132.548958-1-lilingfeng@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-06block: prevent division by zero in blk_rq_stat_sum()Roman Smirnov
The expression dst->nr_samples + src->nr_samples may have zero value on overflow. It is necessary to add a check to avoid division by zero. Found by Linux Verification Center (linuxtesting.org) with Svace. Signed-off-by: Roman Smirnov <r.smirnov@omp.ru> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/20240305134509.23108-1-r.smirnov@omp.ru Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-06drbd: atomically update queue limits in drbd_reconsider_queue_parametersChristoph Hellwig
Switch drbd_reconsider_queue_parameters to set up the queue parameters in an on-stack queue_limits structure and apply the atomically. Remove various helpers that have become so trivial that they can be folded into drbd_reconsider_queue_parameters. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20240305134041.137006-8-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-06drbd: split out a drbd_discard_supported helperChristoph Hellwig
Add a helper to check if discard is supported for a given connection / backing device combination. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Philipp Reisner <philipp.reisner@linbit.com> Reviewed-by: Lars Ellenberg <lars.ellenberg@linbit.com> Tested-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20240306140332.623759-7-philipp.reisner@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-06drbd: don't set max_write_zeroes_sectors in decide_on_discard_supportChristoph Hellwig
fixup_write_zeroes always overrides the max_write_zeroes_sectors value a little further down the callchain, so don't bother to setup a limit in decide_on_discard_support. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Philipp Reisner <philipp.reisner@linbit.com> Reviewed-by: Lars Ellenberg <lars.ellenberg@linbit.com> Tested-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20240306140332.623759-6-philipp.reisner@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-06drbd: merge drbd_setup_queue_param into drbd_reconsider_queue_parametersChristoph Hellwig
drbd_setup_queue_param is only called by drbd_reconsider_queue_parameters and there is no really clear boundary of responsibilities between the two. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Philipp Reisner <philipp.reisner@linbit.com> Reviewed-by: Lars Ellenberg <lars.ellenberg@linbit.com> Tested-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20240306140332.623759-5-philipp.reisner@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-06drbd: refactor the backing dev max_segments calculationChristoph Hellwig
Factor out a drbd_backing_dev_max_segments helper that checks the backing device limitation. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Philipp Reisner <philipp.reisner@linbit.com> Reviewed-by: Lars Ellenberg <lars.ellenberg@linbit.com> Tested-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20240306140332.623759-4-philipp.reisner@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-06drbd: refactor drbd_reconsider_queue_parametersChristoph Hellwig
Split out a drbd_max_peer_bio_size helper for the peer I/O size, and condense the various checks to a nested min3(..., max())) instead of using a lot of local variables. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20240305134041.137006-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-06drbd: pass the max_hw_sectors limit to blk_alloc_diskChristoph Hellwig
Pass a queue_limits structure with the max_hw_sectors limit to blk_alloc_disk instead of updating the limit on the allocated gendisk. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20240305134041.137006-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-06sed-opal: Remove the ret variable from the functionLi kunyu
The ret variable in the function has not yet been effective and can be removed. Signed-off-by: Li kunyu <kunyu@nfschina.com> Link: https://lore.kernel.org/r/20240306101444.1244-1-kunyu@nfschina.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-06sed-opal: Remove unnecessary ‘0’ values from retLi kunyu
ret is assigned first, so it does not need to initialize the assignment. Signed-off-by: Li kunyu <kunyu@nfschina.com> Link: https://lore.kernel.org/r/20240306100659.106521-1-kunyu@nfschina.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-06sed-opal: Remove unnecessary ‘0’ values from errLi zeming
err is assigned first, so it does not need to initialize the assignment. Signed-off-by: Li zeming <zeming@nfschina.com> Link: https://lore.kernel.org/r/20240306100216.69340-1-zeming@nfschina.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-06sed-opal: Remove unnecessary ‘0’ values from errorLi zeming
error is assigned first, so it does not need to initialize the assignment. Signed-off-by: Li zeming <zeming@nfschina.com> Link: https://lore.kernel.org/r/20240306095608.26839-1-zeming@nfschina.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-06block: make block_class constantRicardo B. Marliere
Since commit 43a7206b0963 ("driver core: class: make class_register() take a const *"), the driver core allows for struct class to be in read-only memory, so move the block_class structure to be declared at build time placing it into read-only memory, instead of having to be dynamically allocated at boot time. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20240305-class_cleanup-block-v1-1-130bb27b9c72@marliere.net Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-07Documentation: tracing: Add entry argument access at function exitMasami Hiramatsu (Google)
Add a notes about the entry argument access at function exit probes for kprobes and fprobe trace event. Link: https://lore.kernel.org/all/170952367549.229804.8843506960483577062.stgit@devnote2/ Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2024-03-07selftests/ftrace: Add test cases for entry args at function exitMasami Hiramatsu (Google)
Add kretprobe and function exit probe test cases for checking whether those can access entry arguments at function exit correctly. Link: https://lore.kernel.org/all/170952366504.229804.11605173085475141091.stgit@devnote2/ Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2024-03-06Merge tag 'md-6.9-20240305' of ↵Jens Axboe
https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-6.9/block Pull MD fixes from Song: "This set fixes two issues: 1. dmraid regression since 6.7 kernels. This issue was initially reported in [1]. This set of fix has been reviewed and tested by md and dm folks. 2. raid5 hang since 6.7 kernel, reported in [2]. We haven't got a better fix for this issue yet. This revert is a workaround. It has been applied to 6.7 stable kernels [3], and proved to be affective. We will look more into this issue for a better fix. [1] https://lore.kernel.org/linux-raid/e5e8afe2-e9a8-49a2-5ab0-958d4065c55e@redhat.com/ [2] https://lore.kernel.org/linux-raid/20240123005700.9302-1-dan@danm.net/ [3] 87165c64fe1a in linux-6.7.y branch." * tag 'md-6.9-20240305' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md: dm-raid: fix lockdep waring in "pers->hot_add_disk" dm-raid456, md/raid456: fix a deadlock for dm-raid456 while io concurrent with reshape dm-raid: add a new helper prepare_suspend() in md_personality md/dm-raid: don't call md_reap_sync_thread() directly dm-raid: really frozen sync_thread during suspend md: add a new helper reshape_interrupted() md: export helper md_is_rdwr() md: export helpers to stop sync_thread md: don't clear MD_RECOVERY_FROZEN for new dm-raid until resume Revert "Revert "md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d""
2024-03-07tracing/probes: Support $argN in return probe (kprobe and fprobe)Masami Hiramatsu (Google)
Support accessing $argN in the return probe events. This will help users to record entry data in function return (exit) event for simplfing the function entry/exit information in one event, and record the result values (e.g. allocated object/initialized object) at function exit. For example, if we have a function `int init_foo(struct foo *obj, int param)` sometimes we want to check how `obj` is initialized. In such case, we can define a new return event like below; # echo 'r init_foo retval=$retval param=$arg2 field1=+0($arg1)' >> kprobe_events Thus it records the function parameter `param` and its result `obj->field1` (the dereference will be done in the function exit timing) value at once. This also support fprobe, BTF args and'$arg*'. So if CONFIG_DEBUG_INFO_BTF is enabled, we can trace both function parameters and the return value by following command. # echo 'f target_function%return $arg* $retval' >> dynamic_events Link: https://lore.kernel.org/all/170952365552.229804.224112990211602895.stgit@devnote2/ Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2024-03-07tracing: Remove redundant #else block for BTF args from READMEMasami Hiramatsu (Google)
Remove redundant #else block for BTF args from README message. This is a cleanup, so no change on the message. Link: https://lore.kernel.org/all/170952364558.229804.17285528811097152410.stgit@devnote2/ Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-03-07tracing/probes: cleanup: Set trace_probe::nr_args at trace_probe_initMasami Hiramatsu (Google)
Instead of incrementing the trace_probe::nr_args, init it at trace_probe_init(). Without this change, there is no way to get the number of trace_probe arguments while parsing it. This is a cleanup, so the behavior is not changed. Link: https://lore.kernel.org/all/170952363585.229804.13060759900346411951.stgit@devnote2/ Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2024-03-07tracing/probes: Cleanup probe argument parserMasami Hiramatsu (Google)
Cleanup traceprobe_parse_probe_arg_body() to split out the type parser and post-processing part of fetch_insn. This makes no functional change. Link: https://lore.kernel.org/all/170952362603.229804.9942703761682605372.stgit@devnote2/ Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-03-06dasd: use the atomic queue limits APIChristoph Hellwig
Pass the constant limits directly to blk_mq_alloc_disk, set the nonrot flag there as well, and then use the commit API to change the transfer size and logical block size dependent values. This relies on the assumption that no I/O can be pending before the devices moves into the ready state and doesn't need extra freezing for changes to the queue limits. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Link: https://lore.kernel.org/r/20240228133742.806274-4-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-06dasd: move queue setup to common codeChristoph Hellwig
Most of the code in setup_blk_queue is shared between all disciplines. Move it to common code and leave a method to query the maximum number of transferable blocks, and a flag to indicate discard support. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Link: https://lore.kernel.org/r/20240228133742.806274-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-06dasd: cleamup dasd_state_basic_to_readyChristoph Hellwig
Reflow dasd_state_basic_to_ready a bit to make it easier to modify. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Link: https://lore.kernel.org/r/20240228133742.806274-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-07tracing/fprobe-event: cleanup: Fix a wrong comment in fprobe eventMasami Hiramatsu (Google)
Despite the fprobe event, "Kretprobe" was commented. So fix it. Link: https://lore.kernel.org/all/170952361630.229804.10832200172327797860.stgit@devnote2/ Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-03-06block: Fix page refcounts for unaligned buffers in __bio_release_pages()Tony Battersby
Fix an incorrect number of pages being released for buffers that do not start at the beginning of a page. Fixes: 1b151e2435fc ("block: Remove special-casing of compound pages") Cc: stable@vger.kernel.org Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Tested-by: Greg Edwards <gedwards@ddn.com> Link: https://lore.kernel.org/r/86e592a9-98d4-4cff-a646-0c0084328356@cybernetics.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-07x86/kprobes: Boost more instructions from grp2/3/4/5Jinghao Jia
With the instruction decoder, we are now able to decode and recognize instructions with opcode extensions. There are more instructions in these groups that can be boosted: Group 2: ROL, ROR, RCL, RCR, SHL/SAL, SHR, SAR Group 3: TEST, NOT, NEG, MUL, IMUL, DIV, IDIV Group 4: INC, DEC (byte operation) Group 5: INC, DEC (word/doubleword/quadword operation) These instructions are not boosted previously because there are reserved opcodes within the groups, e.g., group 2 with ModR/M.nnn == 110 is unmapped. As a result, kprobes attached to them requires two int3 traps as being non-boostable also prevents jump-optimization. Some simple tests on QEMU show that after boosting and jump-optimization a single kprobe on these instructions with an empty pre-handler runs 10x faster (~1000 cycles vs. ~100 cycles). Since these instructions are mostly ALU operations and do not touch special registers like RIP, let's boost them so that we get the performance benefit. Link: https://lore.kernel.org/all/20240204031300.830475-4-jinghao7@illinois.edu/ Signed-off-by: Jinghao Jia <jinghao7@illinois.edu> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2024-03-07x86/kprobes: Prohibit kprobing on INT and UDJinghao Jia
Both INT (INT n, INT1, INT3, INTO) and UD (UD0, UD1, UD2) serve special purposes in the kernel, e.g., INT3 is used by KGDB and UD2 is involved in LLVM-KCFI instrumentation. At the same time, attaching kprobes on these instructions (particularly UD) will pollute the stack trace dumped in the kernel ring buffer, since the exception is triggered in the copy buffer rather than the original location. Check for INT and UD in can_probe and reject any kprobes trying to attach to these instructions. Link: https://lore.kernel.org/all/20240204031300.830475-3-jinghao7@illinois.edu/ Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Jinghao Jia <jinghao7@illinois.edu> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2024-03-07x86/kprobes: Refactor can_{probe,boost} return type to boolJinghao Jia
Both can_probe and can_boost have int return type but are using int as boolean in their context. Refactor both functions to make them actually return boolean. Link: https://lore.kernel.org/all/20240204031300.830475-2-jinghao7@illinois.edu/ Signed-off-by: Jinghao Jia <jinghao7@illinois.edu> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2024-03-06KVM: riscv: selftests: Add Zacas extension to get-reg-list testAnup Patel
The KVM RISC-V allows Zacas extension for Guest/VM so add this extension to get-reg-list test. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2024-03-06RISC-V: KVM: Allow Zacas extension for Guest/VMAnup Patel
Extend the KVM ISA extension ONE_REG interface to allow KVM user space to detect and enable Zacas extension for Guest/VM. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2024-03-06KVM: riscv: selftests: Add Ztso extension to get-reg-list testAnup Patel
The KVM RISC-V allows Ztso extension for Guest/VM so add this extension to get-reg-list test. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2024-03-06RISC-V: KVM: Allow Ztso extension for Guest/VMAnup Patel
Extend the KVM ISA extension ONE_REG interface to allow KVM user space to detect and enable Ztso extension for Guest/VM. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2024-03-06RISC-V: KVM: Forward SEED CSR access to user spaceAnup Patel
The SEED CSR access from VS/VU mode (guest) will always trap to HS-mode (KVM) when Zkr extension is available to the Guest/VM. Forward this CSR access to KVM user space so that it can be emulated based on the method chosen by VMM. Fixes: f370b4e668f0 ("RISC-V: KVM: Allow scalar crypto extensions for Guest/VM") Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2024-03-06KVM: riscv: selftests: Add sstc timer testHaibo Xu
Add a KVM selftests to validate the Sstc timer functionality. The test was ported from arm64 arch timer test. Signed-off-by: Haibo Xu <haibo1.xu@intel.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2024-03-06KVM: riscv: selftests: Change vcpu_has_ext to a common functionHaibo Xu
Move vcpu_has_ext to the processor.c and rename it to __vcpu_has_ext so that other test cases can use it for vCPU extension check. Signed-off-by: Haibo Xu <haibo1.xu@intel.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2024-03-06KVM: riscv: selftests: Add guest helper to get vcpu idHaibo Xu
Add guest_get_vcpuid() helper to simplify accessing to per-cpu private data. The sscratch CSR was used to store the vcpu id. Signed-off-by: Haibo Xu <haibo1.xu@intel.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2024-03-06KVM: riscv: selftests: Add exception handling supportHaibo Xu
Add the infrastructure for guest exception handling in riscv selftests. Customized handlers can be enabled by vm_install_exception_handler(vector) or vm_install_interrupt_handler(). The code is inspired from that of x86/arm64. Signed-off-by: Haibo Xu <haibo1.xu@intel.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2024-03-06fuse: get rid of ff->readdir.lockMiklos Szeredi
The same protection is provided by file->f_pos_lock. Note, this relies on the fact that file->f_mode has FMODE_ATOMIC_POS. This flag is cleared by stream_open(), which would prevent locking of f_pos_lock. Prior to commit 7de64d521bf9 ("fuse: break up fuse_open_common()") FOPEN_STREAM on a directory would cause stream_open() to be called. After this commit this is not done anymore, so f_pos_lock will always be locked. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2024-03-06Revert "drm/udl: Add ARGB8888 as a format"Douglas Anderson
This reverts commit 95bf25bb9ed5dedb7fb39f76489f7d6843ab0475. Apparently there was a previous discussion about emulation of formats and it was decided XRGB8888 was the only format to support for legacy userspace [1]. Remove ARGB8888. Userspace needs to be fixed to accept XRGB8888. [1] https://lore.kernel.org/r/60dc7697-d7a0-4bf4-a22e-32f1bbb792c2@suse.de Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240306063721.1.I4a32475190334e1fa4eef4700ecd2787a43c94b5@changeid
2024-03-06phy: qcom-qmp-combo: fix type-c switch registrationJohan Hovold
Due to a long-standing issue in driver core, drivers may not probe defer after having registered child devices to avoid triggering a probe deferral loop (see fbc35b45f9f6 ("Add documentation on meaning of -EPROBE_DEFER")). Move registration of the typec switch to after looking up clocks and other resources. Note that PHY creation can in theory also trigger a probe deferral when a 'phy' supply is used. This does not seem to affect the QMP PHY driver but the PHY subsystem should be reworked to address this (i.e. by separating initialisation and registration of the PHY). Fixes: 2851117f8f42 ("phy: qcom-qmp-combo: Introduce orientation switching") Cc: stable@vger.kernel.org # 6.5 Cc: Bjorn Andersson <quic_bjorande@quicinc.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Vinod Koul <vkoul@kernel.org> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240217150228.5788-7-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-03-06phy: qcom-qmp-combo: fix drm bridge registrationJohan Hovold
Due to a long-standing issue in driver core, drivers may not probe defer after having registered child devices to avoid triggering a probe deferral loop (see fbc35b45f9f6 ("Add documentation on meaning of -EPROBE_DEFER")). This could potentially also trigger a bug in the DRM bridge implementation which does not expect bridges to go away even if device links may avoid triggering this (when enabled). Move registration of the DRM aux bridge to after looking up clocks and other resources. Note that PHY creation can in theory also trigger a probe deferral when a 'phy' supply is used. This does not seem to affect the QMP PHY driver but the PHY subsystem should be reworked to address this (i.e. by separating initialisation and registration of the PHY). Fixes: 35921910bbd0 ("phy: qcom: qmp-combo: switch to DRM_AUX_BRIDGE") Fixes: 1904c3f578dc ("phy: qcom-qmp-combo: Introduce drm_bridge") Cc: stable@vger.kernel.org # 6.5 Cc: Bjorn Andersson <quic_bjorande@quicinc.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Vinod Koul <vkoul@kernel.org> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240217150228.5788-6-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-03-06nvme: clear caller pointer on identify failureKeith Busch
The memory allocated for the identification is freed on failure. Set it to NULL so the caller doesn't have a pointer to that freed address. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2024-03-06greybus: constify the struct device_type usageRicardo B. Marliere
Since commit aed65af1cc2f ("drivers: make device_type const"), the driver core can properly handle constant struct device_type. Move the greybus_hd_type, greybus_module_type, greybus_interface_type, greybus_control_type, greybus_bundle_type and greybus_svc_type variables to be constant structures as well, placing it into read-only memory which can not be modified at runtime. Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net> Reviewed-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20240219-device_cleanup-greybus-v1-1-babb3f65e8cc@marliere.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-06greybus: make greybus_bus_type constGreg Kroah-Hartman
Now that the driver core can properly handle constant struct bus_type, move the greybus_bus_type variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Cc: Alex Elder <elder@kernel.org> Cc: greybus-dev@lists.linaro.org Reviewed-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/2024010517-handgun-scoreless-05e7@gregkh Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-06regulator: lp8788-buck: fix copy and paste bug in lp8788_dvs_gpio_request()Dan Carpenter
"gpio2" as intended here, not "gpio1". Fixes: 95daa868f22b ("regulator: lp8788-buck: Fully convert to GPIO descriptors") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://msgid.link/r/19f62cc2-bdcf-46f7-a5c5-971ef05e1ea7@moroto.mountain Signed-off-by: Mark Brown <broonie@kernel.org>
2024-03-06Merge tag 'icc-6.9-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next Georgi writes: interconnect changes for 6.9 This pull request contains the interconnect changes for the 6.9-rc1 merge window. The highlights are below: Core changes: - Constify the of_phandle_args in xlate functions. Driver changes: - New interconnect driver for the MSM8909 platform. - New interconnect driver for the SM7150 platform. - Clean-up and removal of unused resources in drivers. - Constify some pointers to structs. Signed-off-by: Georgi Djakov <djakov@kernel.org> * tag 'icc-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc: interconnect: qcom: Add SM7150 driver support dt-bindings: interconnect: Add Qualcomm SM7150 DT bindings interconnect: constify of_phandle_args in xlate dt-bindings: interconnect: qcom,rpmh: Fix bouncing @codeaurora address interconnect: qcom: x1e80100: constify pointer to qcom_icc_bcm interconnect: qcom: sa8775p: constify pointer to qcom_icc_bcm interconnect: qcom: sm6115: constify pointer to qcom_icc_node interconnect: qcom: sm8250: constify pointer to qcom_icc_node interconnect: qcom: sa8775p: constify pointer to qcom_icc_node interconnect: qcom: msm8909: constify pointer to qcom_icc_node interconnect: qcom: x1e80100: Remove bogus per-RSC BCMs and nodes dt-bindings: interconnect: Remove bogus interconnect nodes interconnect: qcom: sm8550: Remove bogus per-RSC BCMs and nodes interconnect: qcom: Add MSM8909 interconnect provider driver dt-bindings: interconnect: Add Qualcomm MSM8909 DT bindings
generated by cgit (git 2.34.1) at 2025-09-22 19:09:51 +0000