summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-01-08ixgbe: Fix to get FDMI HBA attributes information with X550Usha Ketineni
Check whether the FCOE support is enabled for the devices to get the FDMI HBA attributes information instead of checking each device id. Also, add Model string information for X550. Signed-off-by: Usha Ketineni <usha.k.ketineni@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-01-08ixgbe: Correct handling of any outer UDP checksum settingMark Rustad
If an outer UDP checksum is set, pass the skb up with CHECKSUM_NONE so that the stack will check the checksum. Do not increment an error counter, because we don't know that there is an actual error. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-01-08ixgbe: do not call check_link for ethtool in ixgbe_get_settings()Emil Tantilov
In ixgbe_get_settings() the link status and speed of the interface are determined based on a read from the LINKS register via the call to mac.ops.check.link(). This can cause issues where external drivers may end up with unknown speed when calling ethtool_get_setings(). Instead of calling the mac.ops.check_link() we can report the speed from the adapter structure which is populated by the driver. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-01-08ixgbe: fix broken PFC with X550Vasu Dev
PFC is configuration is skipped for X550 devices due to a incorrect device id check, fixing that to include X550 PFC configuration. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-01-08ixgbe: use correct FCoE DDP max checkVasu Dev
Use fcoe_ddp_xid from netdev as this is correctly set for different device IDs to avoid DDP skip error on X550 as "xid=0x20b out-of-range" Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-01-08ixgbe: Fill at least min credits to a TC credit refillsVasu Dev
Currently credit_refill and credit_max could be zero for a TC and that is causing Tx hang for CEE mode configuration, so to fix that have at min credit assigned to a TC and that is as what IEEE mode already does. Change-ID: If652c133093a21e530f4e9eab09097976f57fb12 Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-01-08i40e: remove forever unused IDJesse Brandeburg
Somehow an ID that has never been productized is in the code. There are no plans to use it, so just get rid of it. Change-ID: I59117d48ea9ee0360b0fe33833ac8092f8a24b4c Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-01-08i40e: Fix Rx hash reported to the stack by our driverAnjali Singhai Jain
If the driver calls skb_set_hash even with a zero hash, that indicates to the stack that the hash calculation is offloaded in hardware. So the Stack doesn't do a SW hash which is required for load balancing if the user decides to turn of rx-hashing on our device. This patch fixes the path so that we do not call skb_set_hash if the feature is disabled. Change-ID: Ic4debfa4ff91b5a72e447348a75768ed7a2d3e1b Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-01-08i40e: Look up MAC address in Open Firmware or IDPROMSowmini Varadhan
This is the i40e equivalent of commit c762dff24c06 ("ixgbe: Look up MAC address in Open Firmware or IDPROM"). As with that fix, attempt to look up the MAC address in Open Firmware on systems that support it, and use IDPROM on SPARC if no OF address is found. In the case of the i40e there is an assumption that the default mac address has already been set up as the primary mac filter on probe, so if this filter is obtained from the Open Firmware or IDPROM, an explicit write is needed via i40e_aq_mac_address_write() and i40e_aq_add_macvlan() invocation. The I40E_FLAG_PF_MAC flag in the platform-private i40e_pf structure tracks whether a platform-specific mac address was found, in which case calls to i40e_aq_mac_address_write() and i40e_aq_add_macvlan() will be triggered. Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-01-08i40e: allow zero MAC address for VFsMitch Williams
Allow the user to specify a zero MAC address for VFs. This removes the existing MAC address and allows the VF to use a random address. Libvirt does this normally when removing a VF from a VM. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-01-08i40e: change log messages and error returnsMitch Williams
When VFs are being reset, there is a brief window of time when they cannot be configured because they don't have a VSI to configure. If a script is quick, it can fall through that window. To avoid defenestration, log a useful error message and return -EAGAIN. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-01-08brcmfmac: Do not handle link downs for ibss.Hante Meuleman
Sometimes on module reload and reconnect to ibss a deauth from other station can be received. This is treated as a link down but for ibss this is wrong. It will close the interface and no data is possible. Ignore the firmware generated link down events in ibss mode, as ibss is always teared down by cfg80211. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-08brcmfmac: use jiffies for timeout in btcoexArend van Spriel
The btcoex uses a timeout which was in milliseconds and got converted to jiffies upon using timer api. Instead, convert it to jiffies and treat it as such further. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-08brcmfmac: use msecs_to_jiffies() in macro definitionsArend van Spriel
Instead to having macro definition for millisecond timeout have the definition directly in jiffies. This makes the unit of the value immediately clear and may result in code that is bit more compact. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-08brcmfmac: change brcmf_sdio_wd_timer() prototypeArend van Spriel
The function brcmf_sdio_wd_timer() has wdtick parameter. However, it is only called with two values and as such the parameter is replaced with boolean value indicating the timer should be active or not. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-08brcmfmac: Reshuffle functions to avoid forward declarationsHante Meuleman
Function prototype forward declarations are to be avoided. This patch shuffles some of the functions so the forward declarations can be removed. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-08brcmfmac: Add wowl net detect supportHante Meuleman
With wowl net detect it becomes possible to scan for specific ssids and wakeup once found. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-08firmware: dmi_scan: Fix UUID endianness for SMBIOS >= 2.6Andrea Arcangeli
The dmi_ver wasn't updated correctly before the dmi_decode method run to save the uuid. That resulted in "dmidecode -s system-uuid" and /sys/class/dmi/id/product_uuid disagreeing. The latter was buggy and this fixes it. Reported-by: Federico Simoncelli <fsimonce@redhat.com> Fixes: 9f9c9cbb6057 ("drivers/firmware/dmi_scan.c: fetch dmi version from SMBIOS if it exists") Fixes: 79bae42d51a5 ("dmi_scan: refactor dmi_scan_machine(), {smbios,dmi}_present()") Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Jean Delvare <jdelvare@suse.de>
2016-01-07locks: fix unlock when fcntl_setlk races with a closeJeff Layton
Dmitry reported that he was able to reproduce the WARN_ON_ONCE that fires in locks_free_lock_context when the flc_posix list isn't empty. The problem turns out to be that we're basically rebuilding the file_lock from scratch in fcntl_setlk when we discover that the setlk has raced with a close. If the l_whence field is SEEK_CUR or SEEK_END, then we may end up with fl_start and fl_end values that differ from when the lock was initially set, if the file position or length of the file has changed in the interim. Fix this by just reusing the same lock request structure, and simply override fl_type value with F_UNLCK as appropriate. That ensures that we really are unlocking the lock that was initially set. While we're there, make sure that we do pop a WARN_ON_ONCE if the removal ever fails. Also return -EBADF in this event, since that's what we would have returned if the close had happened earlier. Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Fixes: c293621bbf67 (stale POSIX lock handling) Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Acked-by: "J. Bruce Fields" <bfields@fieldses.org>
2016-01-08ACPI / property: avoid leaking format string into kobject nameKees Cook
The dn->name is expected to be used as a literal, so add the missing "%s". Fixes: 263b4c1a64bc (ACPI / property: Expose data-only subnodes via sysfs) Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-07net: lan78xx: Fix to write to OTP(One Time Programmable) per magic number.Woojung.Huh@microchip.com
This patch fixes a bug writing to EEPROM in lan78xx_ethtool_set_eeprom() when asked to write to OTP. Signed-off-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07Merge branch 'macb-usrio-cap'David S. Miller
Neil Armstrong says: ==================== Add new capability and macb DT variant The first patch introduces a new capability bit to disable usage of the USRIO register on platform not implementing it thus avoiding some external imprecise aborts on ARM based platforms. The two last patchs adds a new macb variant compatible name using the capability, the NP4 SoC uses this particular hardware configuration. v1: http://lkml.kernel.org/r/1449485914-12883-1-git-send-email-narmstrong@baylibre.com v2: http://lkml.kernel.org/r/1449582726-6148-1-git-send-email-narmstrong@baylibre.com v3: http://lkml.kernel.org/r/1451898103-21868-1-git-send-email-narmstrong@baylibre.com v4: http://lkml.kernel.org/r/1451900573-22657-1-git-send-email-narmstrong@baylibre.com v5: switch SoC name to non-generic NP4 name ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07dt-bindings: net: macb: Add NP4 macb variantNeil Armstrong
Add NP4 macb SoC variant. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07net: macb: Add NP4 macb config using USRIO_DISABLEDNeil Armstrong
Declare a new NP4 SoC variant having USRIO_DISABLED as capability bit. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07net: ethernet: cadence-macb: Add disabled usrio capsNeil Armstrong
On some platforms, the macb integration does not use the USRIO register to configure the (R)MII port and clocks. When the register is not implemented and the MACB error signal is connected to the bus error, reading or writing to the USRIO register can trigger some Imprecise External Aborts on ARM platforms. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm nouveau fix from Dave Airlie: "Still not back to work, but I decided to forward this fix" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/nouveau/gr/nv40: fix oops in interrupt handler
2016-01-07Merge tag 'iwlwifi-next-for-kalle-2016-01-07_2' of ↵Kalle Valo
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next * bug fixes and improvements for firmware debug system (Golan and myself) * fixes for D0i3 (Eliad) * prevent muliple stations with the same MAC address * advertise support for Rx A-MSDU in A-MPDU * scan related fixes * support -20.ucode * fix WoWLAN for iwldvm * preparations towards multiple Rx queues * platform power improvements for GO mode when no clients are associated
2016-01-07Merge tag 'iommu-fixes-v4.4-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fixes from Joerg Roedel: - Two build issues, one in the ipmmu-vmsa driver and one for the new generic dma-api implemention used on arm64 - A performance fix for said dma-api implemention - An issue caused by a wrong offset in map_sg in the same code as above * tag 'iommu-fixes-v4.4-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/dma: Use correct offset in map_sg iommu/ipmmu-vmsa: Don't truncate ttbr if LPAE is not enabled iommu/dma: Avoid unlikely high-order allocations iommu/dma: Add some missing #includes
2016-01-07Merge ath-next from ath.gitKalle Valo
No major changes to list.
2016-01-07Merge tag 'trace-v4.4-rc4-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull ftrace fix from Steven Rostedt: "PeiyangX Qiu reported that if a module fails to load between calling ftrace_module_init() and do_init_module() that the allocations made in ftrace_module_init() will not be freed, resulting in a memory leak. The solution is to call ftrace_release_mod() on the failing module in the fail path befor do_init_module() is called. This will remove any allocations made for that module, and nothing if ftrace_module_init() wasn't called yet for that module. Note, once do_init_module() is called, the MODULE_GOING notifiers are called for the failed module, which calls into the ftrace code to do the proper clean up (basically calling ftrace_release_mod())" * tag 'trace-v4.4-rc4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace/module: Call clean up function when module init fails early
2016-01-07perf tests: Give a bit more information on the CQM test failure pathArnaldo Carvalho de Melo
Before: $ perf test -v cqm 48: Test intel cqm nmi context read : --- start --- test child forked, pid 1681 parse_events failed test child finished with -2 ---- end ---- Test intel cqm nmi context read: Skip $ After: $ perf test -v cqm 48: Test intel cqm nmi context read : --- start --- test child forked, pid 1681 parse_events failed, is "intel_cqm/llc_occupancy/" available? test child finished with -2 ---- end ---- Test intel cqm nmi context read: Skip $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-eidpiv5x4nkbsx37xwikbnir@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-07perf tests: No need to set attr.sample_freq for tracking !PERF_RECORD_SAMPLEArnaldo Carvalho de Melo
We were asking for a 4kHz sample_freq, making the test fail needlessly when the system reduced /proc/sys/kernel/perf_event_max_sample_rate below that. Before: # perf test -vv dummy 23: Test using a dummy software event to keep tracking : --- start --- test child forked, pid 32421 ------------------------------------------------------------ perf_event_attr: type 1 size 112 config 0x9 { sample_period, sample_freq } 4000 sample_type IP|TID|ID|PERIOD <SNIP> sys_perf_event_open failed, error -22 Unable to open dummy and cycles event test child finished with -2 ---- end ---- Test using a dummy software event to keep tracking: Skip # [root@zoo ~]# cat /proc/sys/kernel/perf_event_max_sample_rate 1000 After: [root@zoo ~]# perf test dummy 23: Test using a dummy software event to keep tracking : Ok Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-487iquegrs2379e5n0pi0tcp@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-07perf python: Add missing files to binding link listArnaldo Carvalho de Melo
Fixing this problem, introduced recently: $ perf test python 16: Try 'import perf' in python, checking link problems : FAILED! In verbose mode we find out what is missing: $ perf test -v python 16: Try 'import perf' in python, checking link problems : --- start --- test child forked, pid 24894 Traceback (most recent call last): File "<stdin>", line 1, in <module> ImportError: /tmp/build/perf/python/perf.so: undefined symbol: find_next_bit test child finished with -1 ---- end ---- Try 'import perf' in python, checking link problems: FAILED! $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Fixes: f77b57ad4fc4 ("perf cpu_map: Add cpu_map__new_event function") Link: http://lkml.kernel.org/n/tip-rajx0zkz6czdrnvvwf0jp76p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-07Merge branch 'mdio-devices'David S. Miller
Andrew Lunn says: ==================== Support MDIO devices The discussions about changing the way DSA probes switches resulted in the wish to have switches attached to an MDIO bus to be represented as an MDIO device. However the current code only supports PHYs on MDIO busses. This patchset remedies this problem. It consists of a number of cleanups, abstraction for accessing structure members, and refactoring, as well as adding the concept of a generic MDIO device and MDIO driver. v2: Added Reviewed-by from Florian Made phydev_name() an inline function Added phy_attached_info/phy_attached_print() for information about the attached phy. Removed now redundant irq setup from of_mdio.c Dropped hunks from PHYMII ioctl which prevented access to any address DSA carrier off before phy setup ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07mdio: Abstract device_remove() and device_free()Andrew Lunn
Make device_free and device_remove operations in the mdio device structure, so the core code does not need to differentiate between phy devices and generic mdio devices. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07mdio: Add support for mdio drivers.Andrew Lunn
Not all devices on an MDIO bus are PHYs. Meaning not all MDIO drivers are PHY drivers. Add support for generic MDIO drivers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07mdio_bus: Add comment to mdiobus_scan() and __mdiobus_register()Andrew Lunn
Make it clear that mdiobus_scan () will only find devices which have a vendor/product ID in registers 2 and 3. These are typically PHY devices. Other sort of MDIO devices, such as switches, are not expected to be found during the scan. Similarly, __mdiobus_register(), which calls mdiobus_scan() will only find PHY devices, and other sorts of MDIO devices are expected to be instantiated from device tree. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07mdio_bus: Generalise of_mdiobus_link_phydev()Andrew Lunn
This function should work with any sort of MDIO device which can be probed on the bus, not just PHY devices. So generalise it. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Move phy specific bus match into phy_deviceAndrew Lunn
Matching a driver to a device has both generic parts, and parts which are specific to PHY devices. Move the PHY specific parts into phy_device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Centralize setting driver module ownerAndrew Lunn
Rather than have each driver set the driver owner field, do it once in the core code. This will also help with later changes, when the device structure will move. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Move PHY PM operations into phy_deviceAndrew Lunn
The MDIO PM operations are really PHY device PM operations. So move them into phy_device. This will be needed when we support devices on the mdio bus which are not PHYs. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07dsa: Register netdev before phyAndrew Lunn
When the phy is connected, an info message is printed. If the netdev it is attached to has not been registered yet, the name 'uninitialised' in the output. By registering the netdev first, then connecting they phy, we can avoid this. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy_device: Move phy attributes into phy_deviceAndrew Lunn
The mdio_bus exports three attributes: - PHY ID is the unique 32-bits identifier for a MDIO device implementing standard MII registers MII_PHYSID1/2, which is not guaranteed to be the case for non-standard compliant devices (e.g: Ethernet switches) - PHY interface describes the data-path of the PHY/MDIO device, which is not strictly a PHY thing, but is required and needed for PHY devices to function, a MDIO device could be a control device exclusively - PHY has fixups describes what the PHY driver may have done, so completely PHY specific These are all phy attributes, not generic mdio attributes. So move the attributes into the phy device code. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Add API for {un}registering an mdio device to a bus.Andrew Lunn
Rather than have drivers directly manipulate the mii_bus structure, provide and API for registering and unregistering devices on an MDIO bus, and performing lookups. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07of: phy: Only register a phy device for physAndrew Lunn
We will soon support devices other than phys on the mdio bus. Look at a child's compatibility string to determine if it is a phy, before registering a phy device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Add an mdio_device structureAndrew Lunn
Not all devices attached to an MDIO bus are phys. So add an mdio_device structure to represent the generic parts of an mdio device, and place this structure into the phy_device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07mdio: Move allocation of interrupts into coreAndrew Lunn
Have mdio_alloc() create the array of interrupt numbers, and initialize it to POLLING. This is what most MDIO drivers want, so allowing code to be removed from the drivers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: mdio-octeon: Use devm_mdiobus_alloc_size()Andrew Lunn
Rather than use devm_kzalloc(), use the mdio helper function. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Centralise print about attached phyAndrew Lunn
Many Ethernet drivers contain the same netdev_info() print statement about the attached phy. Move it into the phy device code. Additionally add a varargs function which can be used to append additional information. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: phy_{read|write}_mmd_indirect: get addr from phydevAndrew Lunn
The address of the device can be determined from the phydev structure, rather than passing it as a parameter. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-12 10:24:16 +0000