summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-12-11i2c: fsl-lpi2c: read lpi2c fifo size in probe()Gao Pan
The lpi2c fifo size is a read only parameter resides Parameter Register. It's better to read lpi2c tx/rx fifo size in probe() other than just define a macro for it. Signed-off-by: Gao Pan <pandy.gao@nxp.com> Reviewed-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-12-11i2c: octeon: thunderx: Remove double-check after interruptJan Glauber
Commit 1bb1ff3e7c74 ("i2c: octeon: Improve performance if interrupt is early") added a double-check around the wait_event_timeout() condition. The performance problem that this commit tried to work-around could not be reproduced. It also makes the wait condition more complicated then it should be. Therefore remove the double-check. Signed-off-by: Jan Glauber <jglauber@cavium.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-12-11i2c: octeon: thunderx: TWSI software reset in recoveryJan Glauber
I've seen i2c recovery reporting long loops of: [ 1035.887818] i2c i2c-4: SCL is stuck low, exit recovery [ 1037.999748] i2c i2c-4: SCL is stuck low, exit recovery [ 1040.111694] i2c i2c-4: SCL is stuck low, exit recovery ... Add a TWSI software reset which clears the status and STA,STP,IFLG in SW_TWSI_EOP_TWSI_CTL. With this the recovery works fine and above message is not seen. Signed-off-by: Jan Glauber <jglauber@cavium.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-12-11i2c: cadence: Allow Cadence I2C to be selected for Cadence Xtensa CPUsJan Kotas
This patch allows Cadence I2C controller to be selected in systems using Cadence Xtensa processors. Signed-off-by: Jan Kotas <jank@cadence.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-12-11i2c: sh_mobile: Add per-Generation fallback bindingsSimon Horman
Add per-Generation fallback bindings for R-Car SoCs. This is in keeping with the compatibility string scheme is being adopted for drivers for Renesas SoCs. Also, improve readability by listing the rmobile fallback compatibility string after the more-specific compatibility strings they provide a fallback for. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-12-11i2c: rcar: Add per-Generation fallback bindingsSimon Horman
In the case of Renesas R-Car hardware we know that there are generations of SoCs, e.g. Gen 2 and Gen 3. But beyond that it's not clear what the relationship between IP blocks might be. For example, I believe that r8a7790 is older than r8a7791 but that doesn't imply that the latter is a descendant of the former or vice versa. We can, however, by examining the documentation and behaviour of the hardware at run-time observe that the current driver implementation appears to be compatible with the IP blocks on SoCs within a given generation. For the above reasons and convenience when enabling new SoCs a per-generation fallback compatibility string scheme is being adopted for drivers for Renesas SoCs. Also: * Deprecate renesas,i2c-rcar. It seems poorly named as it is only compatible with R-Car Gen 1. It also appears unused in mainline. * Add some text to describe per-SoC bindings Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-12-11fscrypt: Rename FS_WRITE_PATH_FL to FS_CTX_HAS_BOUNCE_BUFFER_FLDavid Gstir
... to better explain its purpose after introducing in-place encryption without bounce buffer. Signed-off-by: David Gstir <david@sigma-star.at> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-12-11fscrypt: Delay bounce page pool allocation until neededDavid Gstir
Since fscrypt users can now indicated if fscrypt_encrypt_page() should use a bounce page, we can delay the bounce page pool initialization util it is really needed. That is until fscrypt_operations has no FS_CFLG_OWN_PAGES flag set. Signed-off-by: David Gstir <david@sigma-star.at> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-12-11kbuild: fix scripts/adjust_autoksyms.sh* for the no modules caseNicolas Pitre
When CONFIG_TRIM_UNUSED_KSYMS=y and no modules are actually selected, the adjust_autoksyms.sh script fails with: sed: can't read .tmp_versions/*.mod: No such file or directory Let's cope with that case gracefully. Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Michal Marek <mmarek@suse.com>
2016-12-11fscrypt: Cleanup page locking requirements for fscrypt_{decrypt,encrypt}_page()David Gstir
Rename the FS_CFLG_INPLACE_ENCRYPTION flag to FS_CFLG_OWN_PAGES which, when set, indicates that the fs uses pages under its own control as opposed to writeback pages which require locking and a bounce buffer for encryption. Signed-off-by: David Gstir <david@sigma-star.at> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-12-11fscrypt: Cleanup fscrypt_{decrypt,encrypt}_page()David Gstir
- Improve documentation - Add BUG_ON(len == 0) to avoid accidental switch of offs and len parameters - Improve variable names for readability Signed-off-by: David Gstir <david@sigma-star.at> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-12-11fscrypt: Never allocate fscrypt_ctx on in-place encryptionDavid Gstir
In case of in-place encryption fscrypt_ctx was allocated but never released. Since we don't need it for in-place encryption, we skip allocating it. Fixes: 1c7dcf69eea3 ("fscrypt: Add in-place encryption mode") Signed-off-by: David Gstir <david@sigma-star.at> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-12-11fscrypt: Use correct index in decrypt path.David Gstir
Actually use the fs-provided index instead of always using page->index which is only set for page-cache pages. Fixes: 9c4bb8a3a9b4 ("fscrypt: Let fs select encryption index/tweak") Signed-off-by: David Gstir <david@sigma-star.at> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-12-11fscrypt: move the policy flags and encryption mode definitions to uapi headerTheodore Ts'o
These constants are part of the UAPI, so they belong in include/uapi/linux/fs.h instead of include/linux/fscrypto.h Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Eric Biggers <ebiggers@google.com>
2016-12-11fscrypt: move non-public structures and constants to fscrypt_private.hTheodore Ts'o
Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Eric Biggers <ebiggers@google.com>
2016-12-11fscrypt: unexport fscrypt_initialize()Theodore Ts'o
The fscrypt_initalize() function isn't used outside fs/crypto, so there's no point making it be an exported symbol. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Eric Biggers <ebiggers@google.com>
2016-12-11fscrypt: rename get_crypt_info() to fscrypt_get_crypt_info()Theodore Ts'o
To avoid namespace collisions, rename get_crypt_info() to fscrypt_get_crypt_info(). The function is only used inside the fs/crypto directory, so declare it in the new header file, fscrypt_private.h. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Eric Biggers <ebiggers@google.com>
2016-12-11fscrypto: move ioctl processing more fully into common codeEric Biggers
Multiple bugs were recently fixed in the "set encryption policy" ioctl. To make it clear that fscrypt_process_policy() and fscrypt_get_policy() implement ioctls and therefore their implementations must take standard security and correctness precautions, rename them to fscrypt_ioctl_set_policy() and fscrypt_ioctl_get_policy(). Make the latter take in a struct file * to make it consistent with the former. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-12-11fscrypto: remove unneeded Kconfig dependenciesEric Biggers
SHA256 and ENCRYPTED_KEYS are not needed. CTR shouldn't be needed either, but I left it for now because it was intentionally added by commit 71dea01ea2ed ("ext4 crypto: require CONFIG_CRYPTO_CTR if ext4 encryption is enabled"). So it sounds like there may be a dependency problem elsewhere, which I have not been able to identify specifically, that must be solved before CTR can be removed. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-12-11MAINTAINERS: fscrypto: recommend linux-fsdevel for fscrypto patchesEric Biggers
The filesystem level encryption support, currently used by ext4 and f2fs and proposed for ubifs, does not yet have a dedicated mailing list. Since no mailing lists were specified in MAINTAINERS, get_maintainer.pl only recommended to send patches directly to the maintainers and to linux-kernel. This patch adds linux-fsdevel as the preferred mailing list for fscrypto patches for the time being. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-12-11xconfig: fix missing suboption and help panels on first runBoris Barbulovski
qconfig initial slider sizes fix. On first `make xconfig`, suboption and help panels were hidden. Now we properly detect the first run, and show those panels. Reported-by: Jason Vas Dias <jason.vas.dias@gmail.com> Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Michal Marek <mmarek@suse.com>
2016-12-11xconfig: fix 'Show Debug' functionalityBoris Barbulovski
xconfig - Fix missing 'Show Debug' functionality. xconfig Help mentions 'Show Debug Info' but it was missing from any menu. * Add 'Show debug' menu to the main menu. * Properly load showDebug settings. Reported-by: Jason Vas Dias <jason.vas.dias@gmail.com> Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Michal Marek <mmarek@suse.com>
2016-12-11dma-buf: Extract dma-buf.rstDaniel Vetter
Just prep work to polish and consolidate all the dma-buf related documenation. Unfortunately I didn't discover a way to both integrate this new file into the overall toc while keeping it at the current place. Work around that by moving it into the overall driver-api/index.rst. Cc: linux-doc@vger.kernel.org Cc: Jonathan Corbet <corbet@lwn.net> Cc: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-12-11IB/hfi1: Define platform_config_table_limits onceBart Van Assche
Defining static data structures in a header file is wrong because this causes the data structure to be instantiated once in every .c file it is included in. Hence move the definition of a static array from a header file into the only .c file in which it is used. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Dennis Dalessandro <dennis.dalessandro@intel.com> Cc: Dean Luick <dean.luick@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-11IB/hfi1: constify mmu_notifier_ops structureBhumika Goyal
Declare the structure mmu_notifier_ops as const as it is only stored in the ops field of a mmu_notifier structure. The ops field is of type const struct mmu_notifier_ops *, so mmu_notifier_ops structures having this property can be declared as const. Done using coccinelle: @r1 disable optional_qualifier @ identifier i; position p; @@ static struct mmu_notifier_ops i@p = {...}; @ok1@ identifier r1.i; position p; struct mmu_rb_handler handler; @@ handler.mn.ops=&i@p @bad@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ static +const struct mmu_notifier_ops i={...}; @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct mmu_notifier_ops i; File size before: text data bss dec hex filename 3566 72 16 3654 e46 drivers/infiniband/hw/hfi1/mmu_rb.o File size after: text data bss dec hex filename 3658 0 16 3674 e5a drivers/infiniband/hw/hfi1/mmu_rb.o Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-11IB/rdmavt, IB/hfi1, IB/qib: Add inlines for mtu divisionMike Marciniszyn
Add rvt_div_round_up_mtu() and rvt_div_mtu() routines to do the computation based on the pmtu and the log_pmtu. Change divides in qib, hfi1 to use the new inlines. Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-11IB/hfi1,IB/qib: use rvt swqe mr deref helperMike Marciniszyn
Convert to use new swqe put routine. Reviewed-by: Brian Welty <brian.welty@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-11IB/rdmavt: Add swqe mr deref helperMike Marciniszyn
Add a helper to release mr references held by an swqe. Reviewed-by: Brian Welty <brian.welty@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-11IB/hfi1: Avoid credit return allocation for cpu-less NUMA nodesHarish Chegondi
Do not allocate credit return base and DMA memory for NUMA nodes without CPUs. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Harish Chegondi <harish.chegondi@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-11IB/hfi1,IB/qib: Use new send completion helperMike Marciniszyn
Convert cq completion returns in both rdmavt drivers to use the new helper. Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-11IB/rdmavt: Add a send completion helperMike Marciniszyn
This is for use by client drivers to drive send completions into a CQ. A new exported table allows for the mapping of ib_wr_opcode into a ib_wc_opcode. Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-11IB/qib: Use standard refcount wrapper for QPsSebastian Sanchez
Use the standard driver wrapper for QP reference counters. This makes the code more maintainable. Fixes: Commit 4d6f85c3fa55 ("IB/rdmavt, IB/qib, IB/hfi1: Use new QP put get routines") Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-11IB/hfi1: Use reference count wrapper for MRsSebastian Sanchez
Some parts of the code don't use the standard driver wrapper for memory region reference counters. Use the standard driver wrapper throughout the code. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-11IB/hfi1: Replace qp->refcount release code with standard driver wrapperSebastian Sanchez
Some parts of the code don't use the standard release wrapper rvt_put_qp() for decrementing and testing the refcount to then try to use a resource. Replace this code with the standard driver wrapper. Fixes: Commit 4d6f85c3fa55 ("IB/rdmavt, IB/qib, IB/hfi1: Use new QP put get routines") Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-11IB/hfi1: Preserve external device completed bitDean Luick
The driver should not change the external device request completed bit when not actually doing an external device request. Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com> Signed-off-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-11IB/hfi1: Remove critical section gap in sc_buffer_alloc()Sebastian Sanchez
In sc_buffer_alloc(), the sc->alloc_lock is released before calling sc_release_update(), and it is reacquired after the function call. This causes CPU lock trading. Fix it by not dropping the lock before calling sc_release_update(). Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-11IB/hfi1: Remove usage of qp->s_cur_sgeMitko Haralanov
The s_cur_sge field in the qp structure holds a pointer to the SGE of the currently processed WQE. It assumes the protection of the RVT_S_BUSY flag to prevent the changing of this field while the send engine is using it. This scheme works as long as there is only one instance of the send engine running at a time. Scaling of the send engine to multiple cores would break this assumption as there could be multiple instances of the send engine running on different CPUs. This opens a window where the QP's RVT_S_BUSY flag is not set but the send engine is still running. To prevent accidental changing of the s_cur_sge pointer, the QP's dependence on it is removed. The SGE pointer is now stored in the verbs_txreq, which is a per-packet data structure. This ensures that each individual packet has it's own pointer, which is setup while the RVT_S_BUSY flag is set. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-11IB/rdmavt: Add trace of MR segsMike Marciniszyn
Add tracing of MR segment information. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-11IB/hfi1: Add special setting for low power AOCDean Luick
Low power QSFP AOC cables require a different SerDes Tx PLL bandwidth setting than the default. The 8051 firmware does not know the details, so the driver needs to tell the firmware through a special setting. Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com> Signed-off-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-11IB/hfi1: Remove definition of unused hfi1_affinity structTadeusz Struk
The struct hfi1_affinity is not used anymore. We use the struct hfi1_affinity_node and hfi1_affinity_node_list instead. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-11IB/hfi1: Remove dependence on qp->s_cur_sizeDon Hiatt
The qp->s_cur_size field assumes that the S_BUSY bit protects the field from modification after the slock is dropped. Scaling the send engine to multiple cores would break that assumption. Correct the issue by carrying the payload size in the txreq structure. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-11IB/hfi1: Show statistics counters under IB stats interfaceJianxin Xiong
Previously tools like hfi1stats had to access these counters through debugfs, which often caused permission issue for non-root users. It is not always acceptable to change the debugfs mounting permission due to security concerns. When exposed under the IB stats interface, the counters are universally readable by default. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-11IB/rdmavt: Fix trace hierarchyDennis Dalessandro
Split rdmavt traces into separate files to preserve the original hierarchy since only one trace sub system may now be defined per header file. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-11IB/hfi1: Disable header suppression for short packetsJakub Pawlak
For the received packets with payload less or equal 8DWS RxDmaDataFifoRdUncErr is not reported. There is set RHF.EccErr if the header is not suppressed. When such packet is detected on the send side the header suppression mechanism is disabled by clearing SH bit in the packet header. Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Jakub Pawlak <jakub.pawlak@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-11IB/hfi1: Export 8051 memory and LCB registers via debugfsDean Luick
Both the 8051 memory and LCB register access require multiple steps and coordination with the driver. This cannot be safely done with resource0 alone. The 8051 memory is exported read-only. LCB is exported read/write. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-11IB/hfi1: Use non-atomic __test_and_clear_bit in hot pathSebastian Sanchez
qp->r_aflags is already protected by qp->r_lock, therefore, test_and_clear_bit() doesn't need to be atomic. Profile shows this function call is costly. Change the test_and_clear_bit() call to use the non-atomic variant. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-11IB/hfi1: Fix dc8051 multiple qword memory readsDean Luick
When reading multiple dc8051 data memory locations at once, the read enabled field must be toggled at every address change. Do that by writing only the address first, then writing the enable. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-11IB/hfi1: Read new EPROM formatDean Luick
Add the ability to read the new EPROM format. Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com> Signed-off-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-11Merge branch 'kbuild/rc-fixes' into kbuild/miscMichal Marek
2016-12-11Linux 4.9v4.9Linus Torvalds
generated by cgit (git 2.34.1) at 2025-09-15 16:26:51 +0000