| Age | Commit message (Collapse) | Author |
|---|
|
According to the binding document, add the "syscon" compatible to the
system-management node.
Signed-off-by: Jacky Huang <ychuang3@nuvoton.com>
Link: https://lore.kernel.org/r/20240819035647.306-2-ychuang570808@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
|
|
Since the legacy WMI notify handlers are now using the WMI event data
provided by the WMI driver core, they can coexist with modern WMI
driver notify handlers.
Remove the precedence of WMI driver notify handlers and call both
when receiving an event.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240901031055.3030-6-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Since get_event_data() is only called by wmi_get_notify_data(), it
makes sense to merge both functions.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240901031055.3030-5-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Since the WMI driver core now takes care of retrieving the
WMI event data even for legacy WMI notify handlers, this
function is no longer used.
Remove it to prevent WMI drivers from messing up the ACPI
firmware on some machines.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240901031055.3030-4-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The current legacy WMI handlers are susceptible to picking up wrong
WMI event data on systems where different WMI devices share some
notification IDs.
Prevent this by letting the WMI driver core taking care of retrieving
the event data. This also simplifies the legacy WMI handlers and their
implementation inside the WMI driver core.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240901031055.3030-3-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Use dev_err_probe() directly in the driver probe phase. This can
simplify the code a bit.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Link: https://lore.kernel.org/r/20240905114134.80310-1-zhangzekun11@huawei.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Various DT and fwnode functions take a compatible string as a parameter.
These are often used in cases which don't have a driver, so they've been
missed.
The additional checks add about 400 more undocumented compatible
strings.
Link: https://lore.kernel.org/all/20240903200753.2097911-1-robh@kernel.org/
Acked-by: Saravana Kannan <saravanak@google.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
There are a few functions that do not and should not change
the state of the pin control object. Constify the respective
parameter.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
It's observed that, when the first 4GB of system memory was reserved, all
VCMDQ allocations failed (even with the smallest qsz in the last attempt):
arm-smmu-v3: found companion CMDQV device: NVDA200C:00
arm-smmu-v3: option mask 0x10
arm-smmu-v3: failed to allocate queue (0x8000 bytes) for vcmdq0
acpi NVDA200C:00: tegra241_cmdqv: Falling back to standard SMMU CMDQ
arm-smmu-v3: ias 48-bit, oas 48-bit (features 0x001e1fbf)
arm-smmu-v3: allocated 524288 entries for cmdq
arm-smmu-v3: allocated 524288 entries for evtq
arm-smmu-v3: allocated 524288 entries for priq
This is because the 4GB reserved memory shifted the entire DMA zone from a
lower 32-bit range (on a system without the 4GB carveout) to higher range,
while the dev->coherent_dma_mask was set to DMA_BIT_MASK(32) by default.
The dma_set_mask_and_coherent() call is done in arm_smmu_device_hw_probe()
of the SMMU driver. So any DMA allocation from tegra241_cmdqv_probe() must
wait until the coherent_dma_mask is correctly set.
Move the vintf/vcmdq structure initialization routine into a different op,
"init_structures". Call it at the end of arm_smmu_init_structures(), where
standard SMMU queues get allocated.
Most of the impl_ops aren't ready until vintf/vcmdq structure are init-ed.
So replace the full impl_ops with an init_ops in __tegra241_cmdqv_probe().
And switch to tegra241_cmdqv_impl_ops later in arm_smmu_init_structures().
Note that tegra241_cmdqv_impl_ops does not link to the new init_structures
op after this switch, since there is no point in having it once it's done.
Fixes: 918eb5c856f6 ("iommu/arm-smmu-v3: Add in-kernel support for NVIDIA Tegra241 (Grace) CMDQV")
Reported-by: Matt Ochs <mochs@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/530993c3aafa1b0fc3d879b8119e13c629d12e2b.1725503154.git.nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This is likely a typo. Drop it.
Fixes: 918eb5c856f6 ("iommu/arm-smmu-v3: Add in-kernel support for NVIDIA Tegra241 (Grace) CMDQV")
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/13fd3accb5b7ed6ec11cc6b7435f79f84af9f45f.1725503154.git.nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The flexspi on imx8ulp only has 16 LUTs, different with others which
have up to 32 LUTs.
Add a separate compatible string and nxp_fspi_devtype_data to support
flexspi on imx8ulp.
Fixes: ef89fd56bdfc ("arm64: dts: imx8ulp: add flexspi node")
Cc: stable@kernel.org
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20240905094338.1986871-4-haibo.chen@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The flexspi on different SoCs may have different number of LUTs.
So involve lut_num in nxp_fspi_devtype_data to make distinguish.
This patch prepare for the adding of imx8ulp.
Fixes: ef89fd56bdfc ("arm64: dts: imx8ulp: add flexspi node")
Cc: stable@kernel.org
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20240905094338.1986871-3-haibo.chen@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The flexspi on imx8ulp only has 16 number of LUTs, it is different
with flexspi on other imx SoC which has 32 number of LUTs.
Fixes: ef89fd56bdfc ("arm64: dts: imx8ulp: add flexspi node")
Cc: stable@kernel.org
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20240905094338.1986871-2-haibo.chen@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.
Found by inspection.
No functional change intended.
Compile tested only.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://patch.msgid.link/20240905022017.1642550-1-nichen@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.
Found by inspection.
No functional change intended.
Compile tested only.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://patch.msgid.link/20240905032148.1929393-1-nichen@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
vmbus_chan_group and vmbus_chan_type are not modified. They are only
used in the helpers which take a const type parameter.
Constifying these structures and moving them to a read-only section can
increase over all security.
```
[Before]
text data bss dec hex filename
20568 4699 48 25315 62e3 drivers/hv/vmbus_drv.o
[After]
text data bss dec hex filename
20696 4571 48 25315 62e3 drivers/hv/vmbus_drv.o
```
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Reviewed-by: Naman Jain <namjain@linux.microsoft.com>
Link: https://lore.kernel.org/r/20240904011553.2010203-1-lihongbo22@huawei.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240904011553.2010203-1-lihongbo22@huawei.com>
|
|
Merge "hwmon fixes for v6.11-rc7" into review-hans to bring in
commit a54da9df75cd ("hwmon: (hp-wmi-sensors) Check if WMI event
data exists").
This is a dependency for a set of WMI event data refactoring changes.
|
|
Since
47d13a269bbd ("powerpc/40x: Remove 40x platforms.")
support for PPC40x platforms has been removed. While the EDAC driver also
mentions PPC440 and PPC460 processors, the driver refuses to probe on anything
other than PPC405. It's unlikely support will ever be added at this point for
these other old platforms, so the driver can be removed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Link: https://lore.kernel.org/r/20240904192224.3060307-2-robh@kernel.org
|
|
Another big bottleneck to scalablity is uprobe_treelock that's taken in
a very hot path in handle_swbp(). Now that uprobes are SRCU-protected,
take advantage of that and make uprobes_tree RB-tree look up lockless.
To make RB-tree RCU-protected lockless lookup correct, we need to take
into account that such RB-tree lookup can return false negatives if there
are parallel RB-tree modifications (rotations) going on. We use seqcount
lock to detect whether RB-tree changed, and if we find nothing while
RB-tree got modified inbetween, we just retry. If uprobe was found, then
it's guaranteed to be a correct lookup.
With all the lock-avoiding changes done, we get a pretty decent
improvement in performance and scalability of uprobes with number of
CPUs, even though we are still nowhere near linear scalability. This is
due to SRCU not really scaling very well with number of CPUs on
a particular hardware that was used for testing (80-core Intel Xeon Gold
6138 CPU @ 2.00GHz), but also due to the remaning mmap_lock, which is
currently taken to resolve interrupt address to inode+offset and then
uprobe instance. And, of course, uretprobes still need similar RCU to
avoid refcount in the hot path, which will be addressed in the follow up
patches.
Nevertheless, the improvement is good. We used BPF selftest-based
uprobe-nop and uretprobe-nop benchmarks to get the below numbers,
varying number of CPUs on which uprobes and uretprobes are triggered.
BASELINE
========
uprobe-nop ( 1 cpus): 3.032 ± 0.023M/s ( 3.032M/s/cpu)
uprobe-nop ( 2 cpus): 3.452 ± 0.005M/s ( 1.726M/s/cpu)
uprobe-nop ( 4 cpus): 3.663 ± 0.005M/s ( 0.916M/s/cpu)
uprobe-nop ( 8 cpus): 3.718 ± 0.038M/s ( 0.465M/s/cpu)
uprobe-nop (16 cpus): 3.344 ± 0.008M/s ( 0.209M/s/cpu)
uprobe-nop (32 cpus): 2.288 ± 0.021M/s ( 0.071M/s/cpu)
uprobe-nop (64 cpus): 3.205 ± 0.004M/s ( 0.050M/s/cpu)
uretprobe-nop ( 1 cpus): 1.979 ± 0.005M/s ( 1.979M/s/cpu)
uretprobe-nop ( 2 cpus): 2.361 ± 0.005M/s ( 1.180M/s/cpu)
uretprobe-nop ( 4 cpus): 2.309 ± 0.002M/s ( 0.577M/s/cpu)
uretprobe-nop ( 8 cpus): 2.253 ± 0.001M/s ( 0.282M/s/cpu)
uretprobe-nop (16 cpus): 2.007 ± 0.000M/s ( 0.125M/s/cpu)
uretprobe-nop (32 cpus): 1.624 ± 0.003M/s ( 0.051M/s/cpu)
uretprobe-nop (64 cpus): 2.149 ± 0.001M/s ( 0.034M/s/cpu)
SRCU CHANGES
============
uprobe-nop ( 1 cpus): 3.276 ± 0.005M/s ( 3.276M/s/cpu)
uprobe-nop ( 2 cpus): 4.125 ± 0.002M/s ( 2.063M/s/cpu)
uprobe-nop ( 4 cpus): 7.713 ± 0.002M/s ( 1.928M/s/cpu)
uprobe-nop ( 8 cpus): 8.097 ± 0.006M/s ( 1.012M/s/cpu)
uprobe-nop (16 cpus): 6.501 ± 0.056M/s ( 0.406M/s/cpu)
uprobe-nop (32 cpus): 4.398 ± 0.084M/s ( 0.137M/s/cpu)
uprobe-nop (64 cpus): 6.452 ± 0.000M/s ( 0.101M/s/cpu)
uretprobe-nop ( 1 cpus): 2.055 ± 0.001M/s ( 2.055M/s/cpu)
uretprobe-nop ( 2 cpus): 2.677 ± 0.000M/s ( 1.339M/s/cpu)
uretprobe-nop ( 4 cpus): 4.561 ± 0.003M/s ( 1.140M/s/cpu)
uretprobe-nop ( 8 cpus): 5.291 ± 0.002M/s ( 0.661M/s/cpu)
uretprobe-nop (16 cpus): 5.065 ± 0.019M/s ( 0.317M/s/cpu)
uretprobe-nop (32 cpus): 3.622 ± 0.003M/s ( 0.113M/s/cpu)
uretprobe-nop (64 cpus): 3.723 ± 0.002M/s ( 0.058M/s/cpu)
Peak througput increased from 3.7 mln/s (uprobe triggerings) up to about
8 mln/s. For uretprobes it's a bit more modest with bump from 2.4 mln/s
to 5mln/s.
Suggested-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20240903174603.3554182-8-andrii@kernel.org
|
|
Much like latch_tree, add two RCU methods for the regular RB-tree,
which can be used in conjunction with a seqcount to provide lockless
lookups.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20240903174603.3554182-7-andrii@kernel.org
|
|
With uprobe_unregister() having grown a synchronize_srcu(), it becomes
fairly slow to call. Esp. since both users of this API call it in a
loop.
Peel off the sync_srcu() and do it once, after the loop.
We also need to add uprobe_unregister_sync() into uprobe_register()'s
error handling path, as we need to be careful about returning to the
caller before we have a guarantee that partially attached consumer won't
be called anymore. This is an unlikely slow path and this should be
totally fine to be slow in the case of a failed attach.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Co-developed-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20240903174603.3554182-6-andrii@kernel.org
|
|
uprobe->register_rwsem is one of a few big bottlenecks to scalability of
uprobes, so we need to get rid of it to improve uprobe performance and
multi-CPU scalability.
First, we turn uprobe's consumer list to a typical doubly-linked list
and utilize existing RCU-aware helpers for traversing such lists, as
well as adding and removing elements from it.
For entry uprobes we already have SRCU protection active since before
uprobe lookup. For uretprobe we keep refcount, guaranteeing that uprobe
won't go away from under us, but we add SRCU protection around consumer
list traversal.
Lastly, to keep handler_chain()'s UPROBE_HANDLER_REMOVE handling simple,
we remember whether any removal was requested during handler calls, but
then we double-check the decision under a proper register_rwsem using
consumers' filter callbacks. Handler removal is very rare, so this extra
lock won't hurt performance, overall, but we also avoid the need for any
extra protection (e.g., seqcount locks).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20240903174603.3554182-5-andrii@kernel.org
|
|
It serves no purpose beyond adding unnecessray argument passed to the
filter callback. Just get rid of it, no one is actually using it.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20240903174603.3554182-4-andrii@kernel.org
|
|
To avoid unnecessarily taking a (brief) refcount on uprobe during
breakpoint handling in handle_swbp for entry uprobes, make find_uprobe()
not take refcount, but protect the lifetime of a uprobe instance with
RCU. This improves scalability, as refcount gets quite expensive due to
cache line bouncing between multiple CPUs.
Specifically, we utilize our own uprobe-specific SRCU instance for this
RCU protection. put_uprobe() will delay actual kfree() using call_srcu().
For now, uretprobe and single-stepping handling will still acquire
refcount as necessary. We'll address these issues in follow up patches
by making them use SRCU with timeout.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20240903174603.3554182-3-andrii@kernel.org
|
|
Revamp how struct uprobe is refcounted, and thus how its lifetime is
managed.
Right now, there are a few possible "owners" of uprobe refcount:
- uprobes_tree RB tree assumes one refcount when uprobe is registered
and added to the lookup tree;
- while uprobe is triggered and kernel is handling it in the breakpoint
handler code, temporary refcount bump is done to keep uprobe from
being freed;
- if we have uretprobe requested on a given struct uprobe instance, we
take another refcount to keep uprobe alive until user space code
returns from the function and triggers return handler.
The uprobe_tree's extra refcount of 1 is confusing and problematic. No
matter how many actual consumers are attached, they all share the same
refcount, and we have an extra logic to drop the "last" (which might not
really be last) refcount once uprobe's consumer list becomes empty.
This is unconventional and has to be kept in mind as a special case all
the time. Further, because of this design we have the situations where
find_uprobe() will find uprobe, bump refcount, return it to the caller,
but that uprobe will still need uprobe_is_active() check, after which
the caller is required to drop refcount and try again. This is just too
many details leaking to the higher level logic.
This patch changes refcounting scheme in such a way as to not have
uprobes_tree keeping extra refcount for struct uprobe. Instead, each
uprobe_consumer is assuming its own refcount, which will be dropped
when consumer is unregistered. Other than that, all the active users of
uprobe (entry and return uprobe handling code) keeps exactly the same
refcounting approach.
With the above setup, once uprobe's refcount drops to zero, we need to
make sure that uprobe's "destructor" removes uprobe from uprobes_tree,
of course. This, though, races with uprobe entry handling code in
handle_swbp(), which, through find_active_uprobe()->find_uprobe() lookup,
can race with uprobe being destroyed after refcount drops to zero (e.g.,
due to uprobe_consumer unregistering). So we add try_get_uprobe(), which
will attempt to bump refcount, unless it already is zero. Caller needs
to guarantee that uprobe instance won't be freed in parallel, which is
the case while we keep uprobes_treelock (for read or write, doesn't
matter).
Note also, we now don't leak the race between registration and
unregistration, so we remove the retry logic completely. If
find_uprobe() returns valid uprobe, it's guaranteed to remain in
uprobes_tree with properly incremented refcount. The race is handled
inside __insert_uprobe() and put_uprobe() working together:
__insert_uprobe() will remove uprobe from RB-tree, if it can't bump
refcount and will retry to insert the new uprobe instance. put_uprobe()
won't attempt to remove uprobe from RB-tree, if it's already not there.
All that is protected by uprobes_treelock, which keeps things simple.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20240903174603.3554182-2-andrii@kernel.org
|
|
If bpf_link_prime() fails, bpf_uprobe_multi_link_attach() goes to the
error_free label and frees the array of bpf_uprobe's without calling
bpf_uprobe_unregister().
This leaks bpf_uprobe->uprobe and worse, this frees bpf_uprobe->consumer
without removing it from the uprobe->consumers list.
Fixes: 89ae89f53d20 ("bpf: Add multi uprobe link")
Closes: https://lore.kernel.org/all/000000000000382d39061f59f2dd@google.com/
Reported-by: syzbot+f7a1c2c2711e4a780f19@syzkaller.appspotmail.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: syzbot+f7a1c2c2711e4a780f19@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240813152524.GA7292@redhat.com
|
|
In perf_adjust_period, we will first calculate period, and then use
this period to calculate delta. However, when delta is less than 0,
there will be a deviation compared to when delta is greater than or
equal to 0. For example, when delta is in the range of [-14,-1], the
range of delta = delta + 7 is between [-7,6], so the final value of
delta/8 is 0. Therefore, the impact of -1 and -2 will be ignored.
This is unacceptable when the target period is very short, because
we will lose a lot of samples.
Here are some tests and analyzes:
before:
# perf record -e cs -F 1000 ./a.out
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.022 MB perf.data (518 samples) ]
# perf script
...
a.out 396 257.956048: 23 cs: ffffffff81f4eeec schedul>
a.out 396 257.957891: 23 cs: ffffffff81f4eeec schedul>
a.out 396 257.959730: 23 cs: ffffffff81f4eeec schedul>
a.out 396 257.961545: 23 cs: ffffffff81f4eeec schedul>
a.out 396 257.963355: 23 cs: ffffffff81f4eeec schedul>
a.out 396 257.965163: 23 cs: ffffffff81f4eeec schedul>
a.out 396 257.966973: 23 cs: ffffffff81f4eeec schedul>
a.out 396 257.968785: 23 cs: ffffffff81f4eeec schedul>
a.out 396 257.970593: 23 cs: ffffffff81f4eeec schedul>
...
after:
# perf record -e cs -F 1000 ./a.out
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.058 MB perf.data (1466 samples) ]
# perf script
...
a.out 395 59.338813: 11 cs: ffffffff81f4eeec schedul>
a.out 395 59.339707: 12 cs: ffffffff81f4eeec schedul>
a.out 395 59.340682: 13 cs: ffffffff81f4eeec schedul>
a.out 395 59.341751: 13 cs: ffffffff81f4eeec schedul>
a.out 395 59.342799: 12 cs: ffffffff81f4eeec schedul>
a.out 395 59.343765: 11 cs: ffffffff81f4eeec schedul>
a.out 395 59.344651: 11 cs: ffffffff81f4eeec schedul>
a.out 395 59.345539: 12 cs: ffffffff81f4eeec schedul>
a.out 395 59.346502: 13 cs: ffffffff81f4eeec schedul>
...
test.c
int main() {
for (int i = 0; i < 20000; i++)
usleep(10);
return 0;
}
# time ./a.out
real 0m1.583s
user 0m0.040s
sys 0m0.298s
The above results were tested on x86-64 qemu with KVM enabled using
test.c as test program. Ideally, we should have around 1500 samples,
but the previous algorithm had only about 500, whereas the modified
algorithm now has about 1400. Further more, the new version shows 1
sample per 0.001s, while the previous one is 1 sample per 0.002s.This
indicates that the new algorithm is more sensitive to small negative
values compared to old algorithm.
Fixes: bd2b5b12849a ("perf_counter: More aggressive frequency adjustment")
Signed-off-by: Luo Gengkun <luogengkun@huaweicloud.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20240831074316.2106159-2-luogengkun@huaweicloud.com
|
|
Pull NVMe fixes from Keith:
"nvme fixes for Linux 6.11
- Sparse fix on static symbol (Jinjie)
- Misleading warning message fix (Keith)
- TCP command allocation handling fix (Maurizio)
- PCI tagset allocation handling fix (Keith)
- Low-power quirk for Samsung (Georg)
- Queue limits fix for zone devices (Christoph)
- Target protocol behavior fix (Maurizio)"
* tag 'nvme-6.11-2024-09-05' of git://git.infradead.org/nvme:
nvmet: Identify-Active Namespace ID List command should reject invalid nsid
nvme: set BLK_FEAT_ZONED for ZNS multipath disks
nvme-pci: Add sleep quirk for Samsung 990 Evo
nvme-pci: allocate tagset on reset if necessary
nvmet-tcp: fix kernel crash if commands allocation fails
nvme: use better description for async reset reason
nvmet: Make nvmet_debugfs static
|
|
Geoid is a module parameter which is set by root user.
Its valid values are between 0 and VME_MAX_SLOTS. So, changing data type
of geoid from int to u32 since it will always be positive.
Signed-off-by: Riyan Dhiman <riyandhiman14@gmail.com>
Link: https://lore.kernel.org/r/20240903114849.4953-3-riyandhiman14@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename function SelectChannel() to r8723bs_select_channel(), to avoid
CamelCase and to improve cleanliness of the global namespace.
Signed-off-by: vivek t s <vivek6429.ts@gmail.com>
Link: https://lore.kernel.org/r/ZtmD8i7YZLRIcaI9@victor-IdeaPad-Gaming-3-16IAH7
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Merge series from amergnat@baylibre.com:
This serie aim to add the following audio support for the Genio 350-evk:
- Playback
- 2ch Headset Jack (Earphone)
- 1ch Line-out Jack (Speaker)
- 8ch HDMI Tx
- Capture
- 1ch DMIC (On-board Digital Microphone)
- 1ch AMIC (On-board Analogic Microphone)
- 1ch Headset Jack (External Analogic Microphone)
Of course, HDMI playback need the MT8365 display patches [1] and a DTS
change documented in "mediatek,mt8365-mt6357.yaml".
|
|
This patch fixes spelling mistake to increase code readability
and searching.
Signed-off-by: Roshan Khatri <topofeverest8848@gmail.com>
Link: https://lore.kernel.org/r/20240905134536.4364-1-topofeverest8848@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes spelling mistake to increase code readability
and searching.
Signed-off-by: Roshan Khatri <topofeverest8848@gmail.com>
Link: https://lore.kernel.org/r/20240905112720.3141-1-topofeverest8848@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Allow creators of seconday interrupters to specify the interrupt
moderation interval value in nanoseconds when creating the interrupter.
If not sure what value to use then use the xhci driver default
xhci->imod_interval
Suggested-by: Wesley Cheng <quic_wcheng@quicinc.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240905143300.1959279-13-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
PCI xHC host should be stopped and xhci driver memory freed before putting
host to PCI D3 state during PCI remove callback.
Hosts with XHCI_SPURIOUS_WAKEUP quirk did this the wrong way around
and set the host to D3 before calling usb_hcd_pci_remove(dev), which will
access the host to stop it, and then free xhci.
Fixes: f1f6d9a8b540 ("xhci: don't dereference a xhci member after removing xhci")
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240905143300.1959279-12-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Introduce an initial check for an empty list prior to entering the while
loop. Which enables, the implementation of distinct warnings to
differentiate between scenarios where the list is initially empty and
when it has been emptied during processing skipped isoc TDs.
These adjustments not only simplifies the large while loop, but also
facilitates future enhancements to the handle_tx_event() function.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240905143300.1959279-11-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove unnecessary local 'retval' argument.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240905143300.1959279-10-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
HCD does not allocate or request interrupt for the xhci driver, but HCD
does free and sync xhci interrupts in some cases. Add comment detailing
in which cases HCD will free/sync xhci interrupts.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240905143300.1959279-9-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Variable 'sbrn' is used to store the Serial Bus Release Number, which is
then only used for a debug message. Thus, 'sbrn' can be a local variable
and assigned after the primary HCD check. The SBRN debug message is only
printed when a primary HCD is setup.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240905143300.1959279-8-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Variables 'max_slots', 'max_ports', 'isoc_threshold' and 'event_ring_max'
are never set or used. Thus, remove them.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240905143300.1959279-7-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Completion codes 'COMP_SUCCESS' and 'COMP_SHORT_PACKET' are the most
frequently encountered completion codes. Typically, these codes do not
trigger a default debug message but rather a warning that indicates a
potential issue. This behavior is consistent across all transfer types
with the exception of Bulk transfers. To reduce unnecessary log clutter,
remove the Bulk 'COMP_SHORT_PACKET' debug message.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240905143300.1959279-6-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The removed debug messages trigger each time an isoc frame is handled.
In case of an error, a dedicated debug message exists.
For example, a 60fps USB camera will trigger the debug message every 0.6s.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240905143300.1959279-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 674f8438c121 ("xhci: split handling halted endpoints into two
steps") removed xhci_cleanup_stalled_ring() but left declaration.
Commit 25355e046d29 ("xhci: use generic command timer for stop endpoint
commands.") left behind xhci_stop_endpoint_command_watchdog().
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240905143300.1959279-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Make sure we move the requests from the read_queue to the end of the
read_pool list, avoiding looping and using the same one request all
the time.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240905143300.1959279-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Don't flush all pending DbC data requests when an endpoint halts.
An endpoint may halt and xHC DbC triggers a STALL error event if there's
an issue with a bulk data transfer. The transfer should restart once xHC
DbC receives a ClearFeature(ENDPOINT_HALT) request from the host.
Once xHC DbC restarts it will start from the TRB pointed to by dequeue
field in the endpoint context, which might be the same TRB we got the
STALL event for. Turn the TRB to a no-op in this case to make sure xHC
DbC doesn't reuse and tries to retransmit this same TRB after we already
handled it, and gave its corresponding data request back.
Other STALL events might be completely bogus.
Lukasz Bartosik discovered that xHC DbC might issue spurious STALL events
if hosts sends a ClearFeature(ENDPOINT_HALT) request to non-halted
endpoints even without any active bulk transfers.
Assume STALL event is spurious if it reports 0 bytes transferred, and
the endpoint stopped on the STALLED TRB.
Don't give back the data request corresponding to the TRB in this case.
The halted status is per endpoint. Track it with a per endpoint flag
instead of the driver invented DbC wide DS_STALLED state.
DbC remains in DbC-Configured state even if endpoints halt. There is no
Stalled state in the DbC Port state Machine (xhci section 7.6.6)
Reported-by: Łukasz Bartosik <ukaszb@chromium.org>
Closes: https://lore.kernel.org/linux-usb/20240725074857.623299-1-ukaszb@chromium.org/
Tested-by: Łukasz Bartosik <ukaszb@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240905143300.1959279-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/drivers
Amlogic drivers changes for v6.12:
- Support new Amlogic SoCs in meson-gx-ao-secure & meson-gx-socinfo
* tag 'amlogic-drivers-for-v6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
soc: amlogic: meson-gx-socinfo: add new SoCs id
dt-bindings: arm: amlogic: meson-gx-ao-secure: support more SoCs
Link: https://lore.kernel.org/r/577ad7fe-19b1-468a-b994-573855493fd7@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
"lm75" without any vendor is undocumented. It works with the Linux
kernel since the I2C subsystem will do matches of the compatible string
without a vendor prefix to the i2c_device_id and/or driver name.
Mostly replace "lm75" with "national,lm75" as that's the original part
vendor and the compatible which matches what "lm75" matched with. In a
couple of cases the node name or compatible gives a clue to the actual
part and vendor and a more specific compatible can be used. In these
cases, it does change the variant the kernel picks.
"nct75" is an OnSemi part which is compatible with TI TMP75C based on
a comparison of the OnSemi NCT75 datasheet and configuration the Linux
driver uses. Adding an OnSemi compatible would be an ABI change.
"nxp,lm75" is most likely an NXP part. Alexander Stein says the i.MX53
boards are a NXP LM75A as well. NXP makes a LM75A and LM75B. Both are
11-bit resolution and 100ms sample time. The "national,lm75a" is
9-bit, so "national,lm75b" is the closest match for both NXP variants.
While we're here, fix the node names to use the generic name
"temperature-sensor".
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com> # am335x-nano.dts
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx53-mba53.dts, imx53-tqma53.dtsi
Link: https://lore.kernel.org/r/20240816164717.1585629-1-robh@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This 'struct kobj_type' is not modified. It is only used in
kobject_init_and_add() which takes a 'const struct kobj_type *ktype'
parameter.
Constifying this structure and moving it to a read-only section,
and can increase over all security.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://lore.kernel.org/r/20240904011434.2010118-1-lihongbo22@huawei.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
In this code, if devm_add_action_or_reset() fails, it will call
max1720x_unregister_ancillary() which in turn calls
i2c_unregister_device(). Thus the call to i2c_unregister_device() on the
following line is not required and is a double unregister. Delete it.
Fixes: 47271a935619 ("power: supply: max1720x: add read support for nvmem")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/9c2f76e7-5679-473b-9b9c-e11b492b96ac@stanley.mountain
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
