summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-08-30drm/amd/display: Write flip addr to scratch reg for subvpAlvin Lee
[Description] SubVP needs to "calculate" the earliest in use META address by using the current primary / meta addresses, but this leads to a race condition where FW and driver can read/write the address at the same time and intermittently produce inconsistent address offsets. To mitigate this issue without locking (too slow), save each surface flip addr into scratch registers and use this to keep track of the earliest in use META addres. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: set minimum of VBlank_nomChunTao Tso
[Why] If VBlank_nom is too small, it will cause VStartUP_Start smaller than VBackPorch + VSync width which is an invalid case for VStartUP_Start and where to send AS-SDP. [How] Setup a minimum value to VBlank_nom Reviewed-by: Reza Amini <reza.amini@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: ChunTao Tso <chuntao.tso@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: Correct unit conversion for vstartupReza Amini
[why] vstartup is calculated to be a large number. it works because it is within vertical blank, but it reduces region of blank that can be used for power gating. [how] Calculation needs to convert micro seconds to number of vertical lines. Reviewed-by: Kazlauskas Nicholas <Nicholas.Kazlauskas@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Reza Amini <reza.amini@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: Roll back unit correctionOvidiu Bunea
[why] This Unit correction exposes a Replay corruption. [how] This reverts commit: commit dbd29029c7b5 ("drm/amd/display: Correct unit conversion for vstartup") Roll back unit conversion until Replay can fix their corruption. Fixes: dbd29029c7b5 ("drm/amd/display: Correct unit conversion for vstartup") Reviewed-by: Reza Amini <reza.amini@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: Enable runtime register offset init for DCN32 DMUBAurabindo Pillai
[Why&How] DMUB subsystem was continuing to use compile time offset calculation for register access. Switch this to runtime calculation to stay consistent with rest of DC code. To enable this, an additional interface init_reg_offsets() are added to DMUB's hw_funcs struct. Asics with runtime register offset calculation enabled shall populate this hook with a fn pointer that will invoke the necessary macros to calculate the offset. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: Refactor edp power controlIan Chen
[Why & How] To organize the edp power control a bit: 1. add flag in dc_link to indicate dc to skip all implicit eDP power control. 2. add edp_set_panel_power link service for DM to call. Reviewed-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Ian Chen <ian.chen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: PQ regamma end pointKrunoslav Kovac
[WHY & HOW] PQ has a fixed range of 0-10,000 nits. Using 1=80 nits normalization, PQ should map to 1.0 for X=125.0 HW LUT used for interpolation does not have X=125 so it's interpolated. However, we cap Y to 1 for all X>=125. The closest larger HW point is 128. What we want is Y(128) such that interpolation through 125 gives 1.0. Such value is ~1.00256. Another change is to hardcode PQ table, we pretty much always have 1=80 normalization so the table can be static. Reviewed-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Krunoslav Kovac <krunoslav.kovac@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: PQ tail accuracyKrunoslav Kovac
[WHY & HOW] HW LUTs changed slightly in DCN3: 256 base+slope pairs were replaced by 257 bases. Code was still calculating all 256 base+slope and then creating 257th pt as last base + last slope. This was done in wrong format, and then "fixed" it by making the last two points the same thus making the last slope=0. However, this also created some precision problems near the end that are not visible but they do show up with capture cards. Solution is to calculate 257 and remove deltas since we no longer have those HW registers. Reviewed-by: Anthony Koo <anthony.koo@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Krunoslav Kovac <krunoslav.kovac@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: Expose mall capabilityAurabindo Pillai
[Why&How] Export a debugfs file to report whether MALL cache is supported by the asic or not. Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: Fix useless else if in display_mode_vba_util_32.cSrinivasan Shanmugam
The assignment of the else if and else branches is the same, so the else if here is redundant, hence removed it. Fixes the below: drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_util_32.c:4664:8-10: WARNING: possible condition with no effect (if == else) Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amdgpu: Enable ras for mp0 v13_0_6 sriovYiPeng Chai
Enable ras for mp0 v13_0_6 sriov Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/radeon: Cleanup radeon/radeon_fence.cSrinivasan Shanmugam
Fixes the following: WARNING: Possible repeated word: 'Fences' WARNING: Missing a blank line after declarations WARNING: braces {} are not necessary for single statement blocks WARNING: braces {} are not necessary for any arm of this statement WARNING: Prefer 'unsigned int' to bare use of 'unsigned' WARNING: quoted string split across lines WARNING: Block comments use * on subsequent lines WARNING: Block comments use a trailing */ on a separate line Cc: Guchun Chen <guchun.chen@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: Fix unnecessary conversion to bool in 'amdgpu_dm_setup_replay'Srinivasan Shanmugam
Fixes the following coccicheck: drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_replay.c:94:102-107: WARNING: conversion to bool not needed here drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_replay.c:102:72-77: WARNING: conversion to bool not needed here Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amdkfd: retry after EBUSY is returned from hmm_ranges_get_pagesAlex Sierra
if hmm_range_get_pages returns EBUSY error during svm_range_validate_and_map, within the context of a page fault interrupt. This should retry through svm_range_restore_pages callback. Therefore we treat this as EAGAIN error instead, and defer it to restore pages fallback. Signed-off-by: Alex Sierra <alex.sierra@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amdgpu/jpeg - skip change of power-gating state for sriovSamir Dhume
Powergating is handled in the host driver. Reviewed-by: Zhigang Luo <zhigang.luo@amd.com> Signed-off-by: Samir Dhume <samir.dhume@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amdgpu: Keep reset handlers sharedLijo Lazar
Instead of maintaining a list per device, keep the reset handlers common per ASIC family. A pointer to the list of handlers is maintained in reset control. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Le Ma <le.ma@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Tested-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/pm: Add critical temp for GC v9.4.3Asad Kamal
Add critical temperature message support func for smu v13.0.6 and expose critical temperature as part of hw mon attributes for GC v9.4.3 v2: Added comment for pmfw version requirement & move the check to get_thermal_temperature_range function Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/pm: Update SMUv13.0.6 PMFW headersAsad Kamal
Update PMFW interface headers for updated metrics table and critical temperature message Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amdgpu: update gc_info v2_1 from discoveryLe Ma
Several new fields are exposed in gc_info v2_1 Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Shiwu Zhang <shiwu.zhang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amdgpu: update mall info v2 from discoveryLe Ma
Mall info v2 is introduced in ip discovery Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Shiwu Zhang <shiwu.zhang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amdgpu: Only support RAS EEPROM on dGPU platformCandice Li
RAS EEPROM device is only supported on dGPU platform for smu v13_0_6. Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30Documentation/gpu: Update amdgpu documentationLijo Lazar
7957ec80ef97 ("drm/amdgpu: Add FRU sysfs nodes only if needed") moved the documentation for some of the sysfs nodes to amdgpu_fru_eeprom.c. Update the documentation accordingly. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/amdgpu: Use kmemdup to simplify kmalloc and memcpy logicChen Jiahao
Using kmemdup() helper function rather than implementing it again with kmalloc() + memcpy(), which improves the code readability. Signed-off-by: Chen Jiahao <chenjiahao16@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amdgpu/pm: Add notification for no DC supportBokun Zhang
- There is a DPM issue where if DC is not present, FCLK will stay at low level. We need to send a SMU message to configure the DPM - Reuse smu_v13_0_notify_display_change() for this purpose Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Bokun Zhang <bokun.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: Enable Replay for static screen use casesBhawanpreet Lakha
- Setup replay config on device init. - Enable replay if feature is enabled (prioritize replay over PSR, since it can be enabled in more usecases) - Add debug masks to enable replay on supported ASICs Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-25Merge tag 'drm-intel-next-fixes-2023-08-24' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next - Fix TLB invalidation (Alan) - Fix Display HPD polling (Imre) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZOdOP31OE/Cf1ojo@intel.com
2023-08-25Merge tag 'drm-misc-next-fixes-2023-08-24' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next Short summary of fixes pull: * gpuva: Cleanups * kunit: Documentation fixes * nouveau: * UAPI: Avoid implicit NO_PREFETCH flag * Scheduler fixes * Fix remap * ttm: Fix type conversion in tests Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230824181241.GA6386@linux-uq9g.hotspot.internet-for-guests.com
2023-08-24drm/gpuva_mgr: remove unused prev pointer in __drm_gpuva_sm_map()Danilo Krummrich
The prev pointer in __drm_gpuva_sm_map() was used to implement automatic merging of mappings. Since automatic merging did not make its way upstream, remove this leftover. Fixes: e6303f323b1a ("drm: manager to keep track of GPUs VA mappings") Signed-off-by: Danilo Krummrich <dakr@redhat.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230823233119.2891-1-dakr@redhat.com
2023-08-24drm/tests/drm_kunit_helpers: Place correct function name in the comment headerLee Jones
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/tests/drm_kunit_helpers.c:172: warning: expecting prototype for drm_kunit_helper_context_alloc(). Prototype was for drm_kunit_helper_acquire_ctx_alloc() instead Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230824073710.2677348-10-lee@kernel.org Link: https://lore.kernel.org/r/20230824073710.2677348-14-lee@kernel.org [mripard: Squashed the two patches together] Signed-off-by: Maxime Ripard <mripard@kernel.org>
2023-08-24drm/nouveau: uapi: don't pass NO_PREFETCH flag implicitlyDanilo Krummrich
Currently, NO_PREFETCH is passed implicitly through drm_nouveau_gem_pushbuf_push::length and drm_nouveau_exec_push::va_len. Since this is a direct representation of how the HW is programmed it isn't really future proof for a uAPI. Hence, fix this up for the new uAPI and split up the va_len field of struct drm_nouveau_exec_push, such that we keep 32bit for va_len and 32bit for flags. For drm_nouveau_gem_pushbuf_push::length at least provide NOUVEAU_GEM_PUSHBUF_NO_PREFETCH to indicate the bit shift. While at it, fix up nv50_dma_push() as well, such that the caller doesn't need to encode the NO_PREFETCH flag into the length parameter. Signed-off-by: Danilo Krummrich <dakr@redhat.com> Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230823181746.3446-1-dakr@redhat.com
2023-08-24drm/nouveau: uvmm: fix unset region pointer on remapDanilo Krummrich
Transfer the region pointer of a uvma to the new uvma(s) on re-map to prevent potential shader faults when the re-mapped uvma(s) are unmapped. Signed-off-by: Danilo Krummrich <dakr@redhat.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230820222920.2344-1-dakr@redhat.com
2023-08-24drm/nouveau: sched: avoid job races between entitiesDanilo Krummrich
If a sched job depends on a dma-fence from a job from the same GPU scheduler instance, but a different scheduler entity, the GPU scheduler does only wait for the particular job to be scheduled, rather than for the job to fully complete. This is due to the GPU scheduler assuming that there is a scheduler instance per ring. However, the current implementation, in order to avoid arbitrary amounts of kthreads, has a single scheduler instance while scheduler entities represent rings. As a workaround, set the DRM_SCHED_FENCE_DONT_PIPELINE for all out-fences in order to force the scheduler to wait for full job completion for dependent jobs from different entities and same scheduler instance. There is some work in progress [1] to address the issues of firmware schedulers; once it is in-tree the scheduler topology in Nouveau should be re-worked accordingly. [1] https://lore.kernel.org/dri-devel/20230801205103.627779-1-matthew.brost@intel.com/ Signed-off-by: Danilo Krummrich <dakr@redhat.com> Reviewed-by: Faith Ekstrand <faith.ekstrand@collaboralcom> Link: https://patchwork.freedesktop.org/patch/msgid/20230811010632.2473-1-dakr@redhat.com
2023-08-24Merge tag 'drm-msm-next-2023-08-20' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-next Updates for v6.6, which includes a backmerge of msm-fixes to avoid conficts. Core: - SM6125 MDSS support DPU: - SM6125 DPU support - Added subblocks to display snapshot - Use UBWC data from MDSS driver rather than duplicating it - dpu_core_perf cleanup DSI: - Enabled burst mode to fix CMD mode panels - Runtime PM support - refgen regulator support DSI PHY: - SM6125 support in 14nm DSI PHY driver GPU: - Rework GPU identification to prepare for a7xx, and other a7xx prep - Cleanups and fixes - Disallow legacy relocs on a6xx and newer - a690: switch to using a660_gmu.bin fw as this is what we have in linux-firmware and we see no evidence that it should be different from other a660 family (a6xx subgen 4) devices - Submit overhead opts, 1.6x faster for NO_IMPLICIT_SYNC commits with 100 BOs to 2.5x faster for 1000 BOs Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGv_01g-edjdfKLWWcb-rO5aSyLsv5FpbKrTkXVL9+ngTQ@mail.gmail.com
2023-08-24BackMerge tag 'v6.5-rc7' into drm-nextDave Airlie
Linux 6.5-rc7 This is needed for the CI stuff and the msm pull has fixes in it. Signed-off-by: Dave Airlie <airlied@redhat.com>
2023-08-23drm/i915: Fix HPD polling, reenabling the output poll work as neededImre Deak
After the commit in the Fixes: line below, HPD polling stopped working on i915, since after that change calling drm_kms_helper_poll_enable() doesn't restart drm_mode_config::output_poll_work if the work was stopped (no connectors needing polling) and enabling polling for a connector (during runtime suspend or detecting an HPD IRQ storm). After the above change calling drm_kms_helper_poll_enable() is a nop after it's been called already and polling for some connectors was disabled/re-enabled. Fix this by calling drm_kms_helper_poll_reschedule() added in the previous patch instead, which reschedules the work whenever expected. Fixes: d33a54e3991d ("drm/probe_helper: sort out poll_running vs poll_enabled") CC: stable@vger.kernel.org # 6.4+ Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230822113015.41224-2-imre.deak@intel.com (cherry picked from commit 50452f2f76852322620b63e62922b85e955abe94) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2023-08-23drm: Add an HPD poll helper to reschedule the poll workImre Deak
Add a helper to reschedule drm_mode_config::output_poll_work after polling has been enabled for a connector (and needing a reschedule, since previously polling was disabled for all connectors and hence output_poll_work was not running). This is needed by the next patch fixing HPD polling on i915. CC: stable@vger.kernel.org # 6.4+ Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230822113015.41224-1-imre.deak@intel.com (cherry picked from commit fe2352fd64029918174de4b460dfe6df0c6911cd) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2023-08-22drm/i915: Fix TLB-Invalidation seqno storeAlan Previn
When getting the next gt's seqno to be stored into an objects mm.tlb[gt_id] array, fix the retrieval code to get it from the correct gt instead of the same one. Fixes: d6c531ab4820 ("drm/i915: Invalidate the TLBs on each GT") Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230814182449.1060747-1-alan.previn.teres.alexis@intel.com (cherry picked from commit 90b8ad13536e80b1b4d9ed1c9d527e64ee757c26) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2023-08-22drm/ttm/tests: Fix type conversion in ttm_pool_testKarolina Stolarek
Fix a warning about casting an integer of different size in ttm_pool_alloc_basic_dma_addr() subtest. Cast the DMA address to uintptr_t before casting it to a generic pointer. Signed-off-by: Karolina Stolarek <karolina.stolarek@intel.com> Cc: Christian König <christian.koenig@amd.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202308150419.PaHfWntn-lkp@intel.com/ Link: https://patchwork.freedesktop.org/patch/msgid/20230816105508.1135410-1-karolina.stolarek@intel.com Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2023-08-21Merge tag 'amd-drm-next-6.6-2023-08-18' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.6-2023-08-18: amdgpu: - Panel replay fixes - Misc checkpatch fixes - SMU 13.x fixes - mcbp parameter handling fix for gfx9 - RAS fixes - Misc code cleanups - SR-IOV fixes - Expose both current and average power via hwmon if supported - DP retimer fix - Clockgating fix - Subvp fixes - DMCUB fixes - Gamut remap fix - Misc display fixes - Allow users to force runtime pm when displays are attached - Gracefully handle more partitions than drm nodes - S0ix fixes - GC 9.4.3 fixes amdkfd: - TBA fix for aldebaran - Fix build without CONFIG_DYNAMIC_DEBUG - memdup cleanup - Fix address watch clearing radeon: - Misc code cleanups Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230818195247.10981-1-alexander.deucher@amd.com
2023-08-21Merge tag 'drm-misc-next-fixes-2023-08-17' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next Short summary of fixes pull: * Add MMU dependency to TTM unit tests * panel: Fix Innolux G156HCE-L01 LVDS clock Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230817131832.GA9361@linux-uq9g
2023-08-20Linux 6.5-rc7v6.5-rc7Linus Torvalds
2023-08-20Merge tag 'tty-6.5-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some small tty and serial core fixes for 6.5-rc7 that resolve a lot of reported issues. Primarily in here are the fixes for the serial bus code from Tony that came in -rc1, as it hit wider testing with the huge number of different types of systems and serial ports. All of the reported issues with duplicate names and other issues with this code are now resolved. Other than that included in here is: - n_gsm fix for a previous fix - 8250 lockdep annotation fix - fsl_lpuart serial driver fix - TIOCSTI documentation update for previous CAP_SYS_ADMIN change All of these have been in linux-next for a while with no reported problems" * tag 'tty-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: core: Fix serial core port id, including multiport devices serial: 8250: drop lockdep annotation from serial8250_clear_IER() tty: n_gsm: fix the UAF caused by race condition in gsm_cleanup_mux serial: core: Revert port_id use TIOCSTI: Document CAP_SYS_ADMIN behaviour in Kconfig serial: 8250: Fix oops for port->pm on uart_change_pm() serial: 8250: Reinit port_id when adding back serial8250_isa_devs serial: core: Fix kmemleak issue for serial core device remove MAINTAINERS: Merge TTY layer and serial drivers serial: core: Fix serial_base_match() after fixing controller port name serial: core: Fix serial core controller port name to show controller id serial: core: Fix serial core port id to not use port->line serial: core: Controller id cannot be negative tty: serial: fsl_lpuart: Clear the error flags by writing 1 for lpuart32 platforms
2023-08-20Merge tag 'rust-fixes-6.5-rc7' of https://github.com/Rust-for-Linux/linuxLinus Torvalds
Pull rust fix from Miguel Ojeda: - Macros: fix 'HAS_*' redefinition by the '#[vtable]' macro under conditional compilation * tag 'rust-fixes-6.5-rc7' of https://github.com/Rust-for-Linux/linux: rust: macros: vtable: fix `HAS_*` redefinition (`gen_const_name`)
2023-08-19Merge tag 'i2c-for-6.5-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Usual set of driver fixes. A bit more than usual because I was unavailable for a while" * tag 'i2c-for-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: bcm-iproc: Fix bcm_iproc_i2c_isr deadlock issue i2c: Update documentation to use .probe() again i2c: sun6i-p2wi: Fix an error message in probe() i2c: hisi: Only handle the interrupt of the driver's transfer i2c: tegra: Fix i2c-tegra DMA config option processing i2c: tegra: Fix failure during probe deferral cleanup i2c: designware: Handle invalid SMBus block data response length value i2c: designware: Correct length byte validation logic i2c: imx-lpi2c: return -EINVAL when i2c peripheral clk doesn't work
2023-08-19Merge tag 'for-6.5-rc6-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - fix infinite loop in readdir(), could happen in a big directory when files get renamed during enumeration - fix extent map handling of skipped pinned ranges - fix a corner case when handling ordered extent length - fix a potential crash when balance cancel races with pause - verify correct uuid when starting scrub or device replace * tag 'for-6.5-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix incorrect splitting in btrfs_drop_extent_map_range btrfs: fix BUG_ON condition in btrfs_cancel_balance btrfs: only subtract from len_to_oe_boundary when it is tracking an extent btrfs: fix replace/scrub failure with metadata_uuid btrfs: fix infinite directory reads
2023-08-19Merge tag 'fbdev-for-6.5-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev Pull fbdev fixes and cleanups from Helge Deller: - various code cleanups in amifb, atmel_lcdfb, ssd1307fb, kyro and goldfishfb * tag 'fbdev-for-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: fbdev: goldfishfb: Do not check 0 for platform_get_irq() fbdev: atmel_lcdfb: Remove redundant of_match_ptr() fbdev: kyro: Remove unused declarations fbdev: ssd1307fb: Print the PWM's label instead of its number fbdev: mmp: fix value check in mmphw_probe() fbdev: amifb: Replace zero-length arrays with DECLARE_FLEX_ARRAY() helper
2023-08-19Merge tag 'block-6.5-2023-08-19' of git://git.kernel.dk/linuxLinus Torvalds
Pull block fixes from Jens Axboe: "Main thing here is the fix for the regression in flush handling which caused IO hangs/stalls for a few reporters. Hopefully that should all be sorted out now. Outside of that, just a few minor fixes for issues that were introduced in this cycle" * tag 'block-6.5-2023-08-19' of git://git.kernel.dk/linux: blk-mq: release scheduler resource when request completes blk-crypto: dynamically allocate fallback profile blk-cgroup: hold queue_lock when removing blkg->q_node drivers/rnbd: restore sysfs interface to rnbd-client
2023-08-19blk-mq: release scheduler resource when request completesChengming Zhou
Chuck reported [1] an IO hang problem on NFS exports that reside on SATA devices and bisected to commit 615939a2ae73 ("blk-mq: defer to the normal submission path for post-flush requests"). We analysed the IO hang problem, found there are two postflush requests waiting for each other. The first postflush request completed the REQ_FSEQ_DATA sequence, so go to the REQ_FSEQ_POSTFLUSH sequence and added in the flush pending list, but failed to blk_kick_flush() because of the second postflush request which is inflight waiting in scheduler queue. The second postflush waiting in scheduler queue can't be dispatched because the first postflush hasn't released scheduler resource even though it has completed by itself. Fix it by releasing scheduler resource when the first postflush request completed, so the second postflush can be dispatched and completed, then make blk_kick_flush() succeed. While at it, remove the check for e->ops.finish_request, as all schedulers set that. Reaffirm this requirement by adding a WARN_ON_ONCE() at scheduler registration time, just like we do for insert_requests and dispatch_request. [1] https://lore.kernel.org/all/7A57C7AE-A51A-4254-888B-FE15CA21F9E9@oracle.com/ Link: https://lore.kernel.org/linux-block/20230819031206.2744005-1-chengming.zhou@linux.dev/ Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202308172100.8ce4b853-oliver.sang@intel.com Fixes: 615939a2ae73 ("blk-mq: defer to the normal submission path for post-flush requests") Reported-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Tested-by: Chuck Lever <chuck.lever@oracle.com> Link: https://lore.kernel.org/r/20230813152325.3017343-1-chengming.zhou@linux.dev [axboe: folded in incremental fix and added tags] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-08-19Merge tag 'media/v6.5-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "Three driver fixes" * tag 'media/v6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: imx: imx7-media-csi: Fix applying format constraints media: uvcvideo: Fix menu count handling for userspace XU mappings media: mtk-jpeg: Set platform driver data earlier
2023-08-19Merge tag 'x86_urgent_for_v6.5_rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: "Extraordinary embargoed times call for extraordinary measures. That's why this week's x86/urgent branch is larger than usual, containing all the known fallout fixes after the SRSO mitigation got merged. I know, it is a bit late in the game but everyone who has reported a bug stemming from the SRSO pile, has tested that branch and has confirmed that it fixes their bug. Also, I've run it on every possible hardware I have and it is looking good. It is running on this very machine while I'm typing, for 2 days now without an issue. Famous last words... - Use LEA ...%rsp instead of ADD %rsp in the Zen1/2 SRSO return sequence as latter clobbers flags which interferes with fastop emulation in KVM, leading to guests freezing during boot - A fix for the DIV(0) quotient data leak on Zen1 to clear the divider buffers at the right time - Disable the SRSO mitigation on unaffected configurations as it got enabled there unnecessarily - Change .text section name to fix CONFIG_LTO_CLANG builds - Improve the optprobe indirect jmp check so that certain configurations can still be able to use optprobes at all - A serious and good scrubbing of the untraining routines by PeterZ: - Add proper speculation stopping traps so that objtool is happy - Adjust objtool to handle the new thunks - Make the thunk pointer assignable to the different untraining sequences at runtime, thus avoiding the alternative at the return thunk. It simplifies the code a bit too. - Add a entry_untrain_ret() main entry point which selects the respective untraining sequence - Rename things so that they're more clear - Fix stack validation with FRAME_POINTER=y builds - Fix static call patching to handle when a JMP to the return thunk is the last insn on the very last module memory page - Add more documentation about what each untraining routine does and why" * tag 'x86_urgent_for_v6.5_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/srso: Correct the mitigation status when SMT is disabled x86/static_call: Fix __static_call_fixup() objtool/x86: Fixup frame-pointer vs rethunk x86/srso: Explain the untraining sequences a bit more x86/cpu/kvm: Provide UNTRAIN_RET_VM x86/cpu: Cleanup the untrain mess x86/cpu: Rename srso_(.*)_alias to srso_alias_\1 x86/cpu: Rename original retbleed methods x86/cpu: Clean up SRSO return thunk mess x86/alternative: Make custom return thunk unconditional objtool/x86: Fix SRSO mess x86/cpu: Fix up srso_safe_ret() and __x86_return_thunk() x86/cpu: Fix __x86_return_thunk symbol type x86/retpoline,kprobes: Skip optprobe check for indirect jumps with retpolines and IBT x86/retpoline,kprobes: Fix position of thunk sections with CONFIG_LTO_CLANG x86/srso: Disable the mitigation on unaffected configurations x86/CPU/AMD: Fix the DIV(0) initial fix attempt x86/retpoline: Don't clobber RFLAGS during srso_safe_ret()
generated by cgit (git 2.34.1) at 2025-09-14 13:44:22 +0000