| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Cleanup with guard() and free() helpers
There were several places in the code that had a lot of "goto out" in
the error paths to either unlock a lock or free some memory that was
allocated. But this is error prone. Convert the code over to use the
guard() and free() helpers that let the compiler unlock locks or free
memory when the function exits.
- Update the Rust tracepoint code to use the C code too
There was some duplication of the tracepoint code for Rust that did
the same logic as the C code. Add a helper that makes it possible for
both algorithms to use the same logic in one place.
- Add poll to trace event hist files
It is useful to know when an event is triggered, or even with some
filtering. Since hist files of events get updated when active and the
event is triggered, allow applications to poll the hist file and wake
up when an event is triggered. This will let the application know
that the event it is waiting for happened.
- Add :mod: command to enable events for current or future modules
The function tracer already has a way to enable functions to be
traced in modules by writing ":mod:<module>" into set_ftrace_filter.
That will enable either all the functions for the module if it is
loaded, or if it is not, it will cache that command, and when the
module is loaded that matches <module>, its functions will be
enabled. This also allows init functions to be traced. But currently
events do not have that feature.
Add the command where if ':mod:<module>' is written into set_event,
then either all the modules events are enabled if it is loaded, or
cache it so that the module's events are enabled when it is loaded.
This also works from the kernel command line, where
"trace_event=:mod:<module>", when the module is loaded at boot up,
its events will be enabled then.
* tag 'trace-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (26 commits)
tracing: Fix output of set_event for some cached module events
tracing: Fix allocation of printing set_event file content
tracing: Rename update_cache() to update_mod_cache()
tracing: Fix #if CONFIG_MODULES to #ifdef CONFIG_MODULES
selftests/ftrace: Add test that tests event :mod: commands
tracing: Cache ":mod:" events for modules not loaded yet
tracing: Add :mod: command to enabled module events
selftests/tracing: Add hist poll() support test
tracing/hist: Support POLLPRI event for poll on histogram
tracing/hist: Add poll(POLLIN) support on hist file
tracing: Fix using ret variable in tracing_set_tracer()
tracepoint: Reduce duplication of __DO_TRACE_CALL
tracing/string: Create and use __free(argv_free) in trace_dynevent.c
tracing: Switch trace_stat.c code over to use guard()
tracing: Switch trace_stack.c code over to use guard()
tracing: Switch trace_osnoise.c code over to use guard() and __free()
tracing: Switch trace_events_synth.c code over to use guard()
tracing: Switch trace_events_filter.c code over to use guard()
tracing: Switch trace_events_trigger.c code over to use guard()
tracing: Switch trace_events_hist.c code over to use guard()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest updates from Steven Rostedt:
- Fix use of KERNEL_VERSION in newly created output directory
If a new output directory is created (O=/dir), and one of the options
uses KERNEL_VERSION which will run a "make kernelversion" in the
output directory, it will fail because there is no config file yet.
In this case, have it do a "make allnoconfig" which is the minimal
needed to run the "make kernelversion".
- Remove unused variables
- Fix some typos
* tag 'ktest-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest.pl: Fix typo "accesing"
ktest.pl: Fix typo in comment
ktest.pl: Remove unused declarations in run_bisect_test function
ktest.pl: Check kernelrelease return in get_version
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
- kprobes: Cleanups using guard() and __free(): Use cleanup.h macros to
cleanup code and remove all gotos from kprobes code.
- tracing/probes: Also cleanups tracing/*probe events code with guard()
and __free(). These patches are just to simplify the parser codes.
- kprobes: Reduce preempt disable scope in check_kprobe_access_safe()
This reduces preempt disable time to only when getting the module
refcount in check_kprobe_access_safe().
Previously it disabled preempt needlessly for other checks including
jump_label_text_reserved(), which took a long time because of the
linear search.
* tag 'probes-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/kprobes: Simplify __trace_kprobe_create() by removing gotos
tracing: Use __free() for kprobe events to cleanup
tracing: Use __free() in trace_probe for cleanup
kprobes: Remove remaining gotos
kprobes: Remove unneeded goto
kprobes: Use guard for rcu_read_lock
kprobes: Use guard() for external locks
jump_label: Define guard() for jump_label_lock
tracing/eprobe: Adopt guard() and scoped_guard()
tracing/uprobe: Adopt guard() and scoped_guard()
tracing/kprobe: Adopt guard() and scoped_guard()
kprobes: Adopt guard() and scoped_guard()
kprobes: Reduce preempt disable scope in check_kprobe_access_safe()
|
|
git://git.samba.org/sfrench/cifs-2.6
Pull smb client updates from Steve French:
- Fix oops in DebugData when link speed 0
- Two reparse point fixes
- Ten DFS (global namespace) fixes
- Symlink error handling fix
- Two SMB1 fixes
- Four cleanup fixes
- Improved debugging of status codes
- Fix incorrect output of tracepoints for compounding, and add missing
compounding tracepoint
* tag 'v6.14-rc-smb3-client-fixes-part' of git://git.samba.org/sfrench/cifs-2.6: (23 commits)
smb: client: handle lack of EA support in smb2_query_path_info()
smb: client: don't check for @leaf_fullpath in match_server()
smb: client: get rid of TCP_Server_Info::refpath_lock
cifs: Remove duplicate struct reparse_symlink_data and SYMLINK_FLAG_RELATIVE
cifs: Do not attempt to call CIFSGetSrvInodeNumber() without CAP_INFOLEVEL_PASSTHRU
cifs: Do not attempt to call CIFSSMBRenameOpenFile() without CAP_INFOLEVEL_PASSTHRU
cifs: Remove declaration of dead CIFSSMBQuerySymLink function
cifs: Fix printing Status code into dmesg
cifs: Add missing NT_STATUS_* codes from nterr.h to nterr.c
cifs: Fix endian types in struct rfc1002_session_packet
cifs: Use cifs_autodisable_serverino() for disabling CIFS_MOUNT_SERVER_INUM in readdir.c
smb3: add missing tracepoint for querying wsl EAs
smb: client: fix order of arguments of tracepoints
smb: client: fix oops due to unset link speed
smb: client: correctly handle ErrorContextData as a flexible array
smb: client: don't retry DFS targets on server shutdown
smb: client: fix return value of parse_dfs_referrals()
smb: client: optimize referral walk on failed link targets
smb: client: provide dns_resolve_{unc,name} helpers
smb: client: parse DNS domain name from domain= option
...
|
|
Pull smb server updates from Steve French:
"Three ksmbd server fixes:
- Fix potential memory corruption in IPC calls
- Support FSCTL_QUERY_INTERFACE_INFO for more configurations
- Remove some unused functions"
* tag 'v6.14-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix integer overflows on 32 bit systems
ksmbd: browse interfaces list on FSCTL_QUERY_INTERFACE_INFO IOCTL
ksmbd: Remove unused functions
|
|
As reported by Namhyung Kim and acknowledged by Qiao Zhao (link:
https://lore.kernel.org/linux-perf-users/20241206001436.1947528-1-namhyung@kernel.org/),
on certain machines, perf trace failed to load the BPF program into the
kernel. The verifier runs perf trace's BPF program for up to 1 million
instructions, returning an E2BIG error, whereas the perf trace BPF
program should be much less complex than that. This patch aims to fix
the issue described above.
The E2BIG problem from clang-15 to clang-16 is cause by this line:
} else if (size < 0 && size >= -6) { /* buffer */
Specifically this check: size < 0. seems like clang generates a cool
optimization to this sign check that breaks things.
Making 'size' s64, and use
} else if ((int)size < 0 && size >= -6) { /* buffer */
Solves the problem. This is some Hogwarts magic.
And the unbounded access of clang-12 and clang-14 (clang-13 works this
time) is fixed by making variable 'aug_size' s64.
As for this:
-if (aug_size > TRACE_AUG_MAX_BUF)
- aug_size = TRACE_AUG_MAX_BUF;
+aug_size = args->args[index] > TRACE_AUG_MAX_BUF ? TRACE_AUG_MAX_BUF : args->args[index];
This makes the BPF skel generated by clang-18 work. Yes, new clangs
introduce problems too.
Sorry, I only know that it works, but I don't know how it works. I'm not
an expert in the BPF verifier. I really hope this is not a kernel
version issue, as that would make the test case (kernel_nr) *
(clang_nr), a true horror story. I will test it on more kernel versions
in the future.
Fixes: 395d38419f18: ("perf trace augmented_raw_syscalls: Add more check s to pass the verifier")
Reported-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Howard Chu <howardchu95@gmail.com>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241213023047.541218-1-howardchu95@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
There are some patches with long lines as a result of checkpatch
enforcing 100, not 80, but checkpatch is only a tool not a coding style.
The Linux Kernel Coding Style is still clear here on preferred limit.
Mentioned preferred style of wrapping long lines in DTS, based on Linux
Kernel Coding Style.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250118102247.18257-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify pre-content notification support from Jan Kara:
"This introduces a new fsnotify event (FS_PRE_ACCESS) that gets
generated before a file contents is accessed.
The event is synchronous so if there is listener for this event, the
kernel waits for reply. On success the execution continues as usual,
on failure we propagate the error to userspace. This allows userspace
to fill in file content on demand from slow storage. The context in
which the events are generated has been picked so that we don't hold
any locks and thus there's no risk of a deadlock for the userspace
handler.
The new pre-content event is available only for users with global
CAP_SYS_ADMIN capability (similarly to other parts of fanotify
functionality) and it is an administrator responsibility to make sure
the userspace event handler doesn't do stupid stuff that can DoS the
system.
Based on your feedback from the last submission, fsnotify code has
been improved and now file->f_mode encodes whether pre-content event
needs to be generated for the file so the fast path when nobody wants
pre-content event for the file just grows the additional file->f_mode
check. As a bonus this also removes the checks whether the old
FS_ACCESS event needs to be generated from the fast path. Also the
place where the event is generated during page fault has been moved so
now filemap_fault() generates the event if and only if there is no
uptodate folio in the page cache.
Also we have dropped FS_PRE_MODIFY event as current real-world users
of the pre-content functionality don't really use it so let's start
with the minimal useful feature set"
* tag 'fsnotify_hsm_for_v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: (21 commits)
fanotify: Fix crash in fanotify_init(2)
fs: don't block write during exec on pre-content watched files
fs: enable pre-content events on supported file systems
ext4: add pre-content fsnotify hook for DAX faults
btrfs: disable defrag on pre-content watched files
xfs: add pre-content fsnotify hook for DAX faults
fsnotify: generate pre-content permission event on page fault
mm: don't allow huge faults for files with pre content watches
fanotify: disable readahead if we have pre-content watches
fanotify: allow to set errno in FAN_DENY permission response
fanotify: report file range info with pre-content events
fanotify: introduce FAN_PRE_ACCESS permission event
fsnotify: generate pre-content permission event on truncate
fsnotify: pass optional file access range in pre-content event
fsnotify: introduce pre-content permission events
fanotify: reserve event bit of deprecated FAN_DIR_MODIFY
fanotify: rename a misnamed constant
fanotify: don't skip extra event info if no info_mode is set
fsnotify: check if file is actually being watched for pre-content events on open
fsnotify: opt-in for permission events at file open time
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull isofs update from Jan Kara:
"Partial conversion of isofs to folios"
* tag 'fs_for_v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
isofs: Partially convert zisofs_read_folio to use a folio
|
|
DTS example in the bindings should be indented with 2- or 4-spaces and
aligned with opening '- |', so correct any differences like 3-spaces or
mixtures 2- and 4-spaces in one binding.
No functional changes here, but saves some comments during reviews of
new patches built on existing code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> # renesas
Link: https://lore.kernel.org/r/20250107131019.246517-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull inotify update from Jan Kara:
"A small inotify strcpy() cleanup"
* tag 'fsnotify_for_v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
inotify: Use strscpy() for event->name copies
|
|
Pull XFS updates from Carlos Maiolino:
"This is mostly focused on the implementation of reflink and
reverse-mapping support for XFS's real-time devices.
It also includes several bugfixes.
- Implement reflink support for the realtime device
- Implement reverse-mapping support for the realtime device
- Several bug fixes and cleanups"
* tag 'xfs-merge-6.14' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (121 commits)
xfs: fix buffer lookup vs release race
xfs: check for dead buffers in xfs_buf_find_insert
xfs: add a b_iodone callback to struct xfs_buf
xfs: move b_li_list based retry handling to common code
xfs: simplify xfsaild_resubmit_item
xfs: always complete the buffer inline in xfs_buf_submit
xfs: remove the extra buffer reference in xfs_buf_submit
xfs: move invalidate_kernel_vmap_range to xfs_buf_ioend
xfs: simplify buffer I/O submission
xfs: move in-memory buftarg handling out of _xfs_buf_ioapply
xfs: move write verification out of _xfs_buf_ioapply
xfs: remove xfs_buf_delwri_submit_buffers
xfs: simplify xfs_buf_delwri_pushbuf
xfs: move xfs_buf_iowait out of (__)xfs_buf_submit
xfs: remove the incorrect comment about the b_pag field
xfs: remove the incorrect comment above xfs_buf_free_maps
xfs: fix a double completion for buffers on in-memory targets
xfs/libxfs: replace kmalloc() and memcpy() with kmemdup()
xfs: constify feature checks
xfs: refactor xfs_fs_statfs
...
|
|
Revert commit 41a337b40e98 ("Add EXPORT macros for exporting PM
functions") because the macros added by it are still unused almost
two years after they had been introduced.
Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250116154354.149297-1-andriy.shevchenko@linux.intel.com
[ rjw: New changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In hibernation_platform_enter(), the code did not check the
return value of syscore_suspend(), potentially leading to a
situation where syscore_resume() would be called even if
syscore_suspend() failed. This could cause unpredictable
behavior or system instability.
Modify the code sequence in question to properly handle errors returned
by syscore_suspend(). If an error occurs in the suspend path, the code
now jumps to label 'Enable_irqs' skipping the syscore_resume() call and
only enabling interrupts after setting the system state to SYSTEM_RUNNING.
Fixes: 40dc166cb5dd ("PM / Core: Introduce struct syscore_ops for core subsystems PM")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20250119143205.2103-1-vulab@iscas.ac.cn
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
count and offset are passed from user space and not checked, only
offset is capped to 40 bits, which can be used to read/write out of
bounds of the device.
Fixes: 6e3f26456009 (“vfio/platform: read and write support for the device fd”)
Cc: stable@vger.kernel.org
Reported-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Tested-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Remove the unconditional binding of sugov kthreads to the affected CPUs
if the cpufreq driver indicates that updates can happen from any CPU.
This allows userspace to set affinities to either save power (waking up
bigger CPUs on HMP can be expensive) or increasing performance (by
letting the utilized CPUs run without preemption of the sugov kthread).
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://patch.msgid.link/5a8deed4-7764-4729-a9d4-9520c25fa7e8@arm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
At the end of cpufreq_online() in cpufreq.c, set_boost is executed and
the per-policy boost flag is set to mirror the cpufreq_driver boost, so
it is not necessary to run set_boost in acpi_cpufreq_cpu_init().
Signed-off-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/20250117101457.1530653-5-zhenglifeng1@huawei.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In policy initialization, policy->max and policy->cpuinfo.max_freq are
always set to the value calculated from caps->nominal_perf.
This will cause the frequency stay on base frequency even if the policy
is already boosted when a CPU is going online.
Fix this by using policy->boost_enabled to determine which value should
be set.
Signed-off-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/20250117101457.1530653-4-zhenglifeng1@huawei.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In cpufreq_online() of cpufreq.c, the per-policy boost flag is already
set to mirror the cpufreq_driver boost during init but using freq_table
to judge if the policy has boost frequency. There are two drawbacks to
this approach:
1. It doesn't work for the cpufreq drivers that do not use a frequency
table. For now, acpi-cpufreq and amd-pstate have to enable boost in
policy initialization. And cppc_cpufreq never set policy to boost
when going online no matter what the cpufreq_driver boost flag is.
2. If the CPU goes offline when cpufreq_driver boost is enabled and
then goes online when cpufreq_driver boost is disabled, the
per-policy boost flag will incorrectly remain true.
Running set_boost at the end of the online process is a more generic way
for all cpufreq drivers.
Signed-off-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Link: https://patch.msgid.link/20250117101457.1530653-3-zhenglifeng1@huawei.com
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
It turns out that CPUX will stay on the base frequency after performing
these operations:
1. boost all CPUs: echo 1 > /sys/devices/system/cpu/cpufreq/boost
2. offline one CPU: echo 0 > /sys/devices/system/cpu/cpuX/online
3. deboost all CPUs: echo 0 > /sys/devices/system/cpu/cpufreq/boost
4. online CPUX: echo 1 > /sys/devices/system/cpu/cpuX/online
5. boost all CPUs again: echo 1 > /sys/devices/system/cpu/cpufreq/boost
This is because max_freq_req of the policy is not updated during the
online process, and the value of max_freq_req before the last offline is
retained.
When the CPU is boosted again, freq_qos_update_request() will do nothing
because the old value is the same as the new one. This causes the CPU to
stay at the base frequency. Updating max_freq_req in cpufreq_online()
will solve this problem.
Signed-off-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/20250117101457.1530653-2-zhenglifeng1@huawei.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The driver generates following warning when regulator support isn't
enabled in the kernel. Fix it.
drivers/cpufreq/s3c64xx-cpufreq.c: In function 's3c64xx_cpufreq_set_target':
>> drivers/cpufreq/s3c64xx-cpufreq.c:55:22: warning: variable 'old_freq' set but not used [-Wunused-but-set-variable]
55 | unsigned int old_freq, new_freq;
| ^~~~~~~~
>> drivers/cpufreq/s3c64xx-cpufreq.c:54:30: warning: variable 'dvfs' set but not used [-Wunused-but-set-variable]
54 | struct s3c64xx_dvfs *dvfs;
| ^~~~
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501191803.CtfT7b2o-lkp@intel.com/
Cc: 5.4+ <stable@vger.kernel.org> # v5.4+
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/236b227e929e5adc04d1e9e7af6845a46c8e9432.1737525916.git.viresh.kumar@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If one of the waveform functions is called for a chip that only supports
.apply(), we want that an error code is returned and not a NULL pointer
exception.
Fixes: 6c5126c6406d ("pwm: Provide new consumer API functions for waveforms")
Cc: stable@vger.kernel.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Tested-by: Trevor Gamblin <tgamblin@baylibre.com>
Link: https://lore.kernel.org/r/20250123172709.391349-2-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
The Vexia EDU ATLA 10 tablet comes in 2 different versions with
significantly different mainboards. The only outward difference is that
the charging barrel on one is marked 5V and the other is marked 9V.
Both ship with Android 4.4 as factory OS and have the usual broken DSDT
issues for x86 Android tablets.
Add a quirk to skip ACPI I2C client enumeration for the 5V version to
complement the existing quirk for the 9V version.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20250123132202.18209-1-hdegoede@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In commit e4b5ccd392b9 ("drm/v3d: Ensure job pointer is set to NULL
after job completion"), we introduced a change to assign the job pointer
to NULL after completing a job, indicating job completion.
However, this approach created a race condition between the DRM
scheduler workqueue and the IRQ execution thread. As soon as the fence is
signaled in the IRQ execution thread, a new job starts to be executed.
This results in a race condition where the IRQ execution thread sets the
job pointer to NULL simultaneously as the `run_job()` function assigns
a new job to the pointer.
This race condition can lead to a NULL pointer dereference if the IRQ
execution thread sets the job pointer to NULL after `run_job()` assigns
it to the new job. When the new job completes and the GPU emits an
interrupt, `v3d_irq()` is triggered, potentially causing a crash.
[ 466.310099] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000c0
[ 466.318928] Mem abort info:
[ 466.321723] ESR = 0x0000000096000005
[ 466.325479] EC = 0x25: DABT (current EL), IL = 32 bits
[ 466.330807] SET = 0, FnV = 0
[ 466.333864] EA = 0, S1PTW = 0
[ 466.337010] FSC = 0x05: level 1 translation fault
[ 466.341900] Data abort info:
[ 466.344783] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
[ 466.350285] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 466.355350] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 466.360677] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000089772000
[ 466.367140] [00000000000000c0] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
[ 466.375875] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
[ 466.382163] Modules linked in: rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device algif_hash algif_skcipher af_alg bnep binfmt_misc vc4 snd_soc_hdmi_codec drm_display_helper cec brcmfmac_wcc spidev rpivid_hevc(C) drm_client_lib brcmfmac hci_uart drm_dma_helper pisp_be btbcm brcmutil snd_soc_core aes_ce_blk v4l2_mem2mem bluetooth aes_ce_cipher snd_compress videobuf2_dma_contig ghash_ce cfg80211 gf128mul snd_pcm_dmaengine videobuf2_memops ecdh_generic sha2_ce ecc videobuf2_v4l2 snd_pcm v3d sha256_arm64 rfkill videodev snd_timer sha1_ce libaes gpu_sched snd videobuf2_common sha1_generic drm_shmem_helper mc rp1_pio drm_kms_helper raspberrypi_hwmon spi_bcm2835 gpio_keys i2c_brcmstb rp1 raspberrypi_gpiomem rp1_mailbox rp1_adc nvmem_rmem uio_pdrv_genirq uio i2c_dev drm ledtrig_pattern drm_panel_orientation_quirks backlight fuse dm_mod ip_tables x_tables ipv6
[ 466.458429] CPU: 0 UID: 1000 PID: 2008 Comm: chromium Tainted: G C 6.13.0-v8+ #18
[ 466.467336] Tainted: [C]=CRAP
[ 466.470306] Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT)
[ 466.476157] pstate: 404000c9 (nZcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 466.483143] pc : v3d_irq+0x118/0x2e0 [v3d]
[ 466.487258] lr : __handle_irq_event_percpu+0x60/0x228
[ 466.492327] sp : ffffffc080003ea0
[ 466.495646] x29: ffffffc080003ea0 x28: ffffff80c0c94200 x27: 0000000000000000
[ 466.502807] x26: ffffffd08dd81d7b x25: ffffff80c0c94200 x24: ffffff8003bdc200
[ 466.509969] x23: 0000000000000001 x22: 00000000000000a7 x21: 0000000000000000
[ 466.517130] x20: ffffff8041bb0000 x19: 0000000000000001 x18: 0000000000000000
[ 466.524291] x17: ffffffafadfb0000 x16: ffffffc080000000 x15: 0000000000000000
[ 466.531452] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
[ 466.538613] x11: 0000000000000000 x10: 0000000000000000 x9 : ffffffd08c527eb0
[ 466.545777] x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000
[ 466.552941] x5 : ffffffd08c4100d0 x4 : ffffffafadfb0000 x3 : ffffffc080003f70
[ 466.560102] x2 : ffffffc0829e8058 x1 : 0000000000000001 x0 : 0000000000000000
[ 466.567263] Call trace:
[ 466.569711] v3d_irq+0x118/0x2e0 [v3d] (P)
[ 466.573826] __handle_irq_event_percpu+0x60/0x228
[ 466.578546] handle_irq_event+0x54/0xb8
[ 466.582391] handle_fasteoi_irq+0xac/0x240
[ 466.586498] generic_handle_domain_irq+0x34/0x58
[ 466.591128] gic_handle_irq+0x48/0xd8
[ 466.594798] call_on_irq_stack+0x24/0x58
[ 466.598730] do_interrupt_handler+0x88/0x98
[ 466.602923] el0_interrupt+0x44/0xc0
[ 466.606508] __el0_irq_handler_common+0x18/0x28
[ 466.611050] el0t_64_irq_handler+0x10/0x20
[ 466.615156] el0t_64_irq+0x198/0x1a0
[ 466.618740] Code: 52800035 3607faf3 f9442e80 52800021 (f9406018)
[ 466.624853] ---[ end trace 0000000000000000 ]---
[ 466.629483] Kernel panic - not syncing: Oops: Fatal exception in interrupt
[ 466.636384] SMP: stopping secondary CPUs
[ 466.640320] Kernel Offset: 0x100c400000 from 0xffffffc080000000
[ 466.646259] PHYS_OFFSET: 0x0
[ 466.649141] CPU features: 0x100,00000170,00901250,0200720b
[ 466.654644] Memory Limit: none
[ 466.657706] ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]---
Fix the crash by assigning the job pointer to NULL before signaling the
fence. This ensures that the job pointer is cleared before any new job
starts execution, preventing the race condition and the NULL pointer
dereference crash.
Cc: stable@vger.kernel.org
Fixes: e4b5ccd392b9 ("drm/v3d: Ensure job pointer is set to NULL after job completion")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Tested-by: Phil Elwell <phil@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250123012403.20447-1-mcanal@igalia.com
|
|
- Constify struct bin_attribute for sysfs, VPD, P2PDMA, and the IBM ACPI
hotplug driver (Thomas Weißschuh)
- Update PCI_EXP_LNKCAP_SLS comment (Lukas Wunner)
- Drop superfluous pm_wakeup.h include (Wolfram Sang)
- Remove redundant PCI_VSEC_HDR and PCI_VSEC_HDR_LEN_SHIFT (Dongdong Zhang)
- Correct documentation of the 'config_acs=' kernel parameter (Akihiko
Odaki)
* pci/misc:
Documentation: Fix pci=config_acs= example
PCI: Remove redundant PCI_VSEC_HDR and PCI_VSEC_HDR_LEN_SHIFT
PCI: Don't include 'pm_wakeup.h' directly
PCI: Update code comment on PCI_EXP_LNKCAP_SLS for PCIe r3.0
PCI/ACPI: Constify 'struct bin_attribute'
PCI/P2PDMA: Constify 'struct bin_attribute'
PCI/VPD: Constify 'struct bin_attribute'
PCI/sysfs: Constify 'struct bin_attribute'
|
|
- Add DT binding and driver support for Xilinx Versal CPM5 (Thippeswamy
Havalige)
* pci/controller/xilinx-cpm:
PCI: xilinx-cpm: Add support for Versal CPM5 Root Port Controller 1
dt-bindings: PCI: xilinx-cpm: Add compatible string for CPM5 host1
|
|
- Add struct rockchip_pcie_ep kernel-doc to fix warnings (Damien Le Moal)
- Simplify clock and reset handling by using bulk interfaces (Anand Moon)
- Pass typed rockchip_pcie (not void) pointer to
rockchip_pcie_disable_clocks() (Anand Moon)
- Return -ENOMEM, not success, when pci_epc_mem_alloc_addr() fails (Dan
Carpenter)
* pci/controller/rockchip:
PCI: rockchip-ep: Fix error code in rockchip_pcie_ep_init_ob_mem()
PCI: rockchip: Refactor rockchip_pcie_disable_clocks() signature
PCI: rockchip: Simplify reset control handling by using reset_control_bulk*() function
PCI: rockchip: Simplify clock handling by using clk_bulk*() functions
PCI: rockchip: Add missing fields descriptions for struct rockchip_pcie_ep
|
|
- Avoid passing stack buffer as resource name (King Dix)
* pci/controller/rcar-ep:
PCI: rcar-ep: Fix incorrect variable used when calling devm_request_mem_region()
|
|
- Add MODULE_DEVICE_TABLE() to enable module autoloading (Liao Chen)
* pci/controller/mvebu:
PCI: mvebu: Enable module autoloading
|
|
- Set up the inbound address translation based on whether the platform
allows coherent or non-coherent DMA (Daire McNamara)
- Update DT binding such that platforms are DMA-coherent by default and
must specify 'dma-noncoherent' if needed (Conor Dooley)
* pci/controller/microchip:
dt-bindings: PCI: microchip,pcie-host: Allow dma-noncoherent
PCI: microchip: Set inbound address translation for coherent or non-coherent mode
|
|
- Use clk_bulk_prepare_enable() instead of separate clk_bulk_prepare() and
clk_bulk_enable() (Lorenzo Bianconi)
- Rearrange reset assert/deassert so they're both done in the *_power_up()
callbacks (Lorenzo Bianconi)
- Document that Airoha EN7581 requires PHY init and power-on before PHY
reset deassert, unlike other MediaTek Gen3 controllers (Lorenzo Bianconi)
- Move Airoha EN7581 post-reset delay from the en7581 clock .enable()
method to mtk_pcie_en7581_power_up() (Lorenzo Bianconi)
- Sleep instead of delay during Airoha EN7581 power-up, since this is a
non-atomic context (Lorenzo Bianconi)
- Skip PERST# assertion on Airoha EN7581 during probe and suspend/resume to
avoid a hardware defect (Lorenzo Bianconi)
- Enable async probe to reduce system startup time (Douglas Anderson)
* pci/controller/mediatek:
PCI: mediatek-gen3: Enable async probe by default
PCI: mediatek-gen3: Avoid PCIe resetting via PERST# for Airoha EN7581 SoC
PCI: mediatek-gen3: Rely on msleep() in mtk_pcie_en7581_power_up()
PCI: mediatek-gen3: Move reset delay in mtk_pcie_en7581_power_up()
PCI: mediatek-gen3: Add comment about initialization order in mtk_pcie_en7581_power_up()
PCI: mediatek-gen3: Move reset/assert callbacks in .power_up()
PCI: mediatek-gen3: Rely on clk_bulk_prepare_enable() in mtk_pcie_en7581_power_up()
|
|
- Simplify by using syscon_regmap_lookup_by_phandle_args() instead of
syscon_regmap_lookup_by_phandle() followed by
of_property_read_u32_array() (Krzysztof Kozlowski)
* pci/controller/layerscape:
PCI: layerscape: Use syscon_regmap_lookup_by_phandle_args
|
|
- Add DT compatible string 'fsl,imx8q-pcie-ep' and driver support for
i.MX8Q series (i.MX8QM, i.MX8QXP, and i.MX8DXL) Endpoints (Frank Li)
- Add DT binding for optional i.MX95 Refclk and driver support to enable it
if the platform hasn't enabled it (Richard Zhu)
- Configure PHY based on controller being in Root Complex or Endpoint mode
(Frank Li)
- Rely on dbi2 and iATU base addresses from DT via dw_pcie_get_resources()
instead of hardcoding them in imx6 (Richard Zhu)
- Skip controller_id computation for i.MX7D since it only has one
controller (Richard Zhu)
- Deassert apps_reset in imx_pcie_deassert_core_reset() since it is
asserted in imx_pcie_assert_core_reset() (Richard Zhu)
- Add missing reference clock enable or disable logic for IMX6SX, IMX7D,
IMX8MM (Richard Zhu)
- Remove redundant imx7d_pcie_init_phy() since imx7d_pcie_enable_ref_clk()
does the same thing (Richard Zhu)
* pci/controller/imx6:
PCI: imx6: Clean up comments and whitespace
PCI: imx6: Remove surplus imx7d_pcie_init_phy() function
PCI: imx6: Add missing reference clock disable logic
PCI: imx6: Deassert apps_reset in imx_pcie_deassert_core_reset()
PCI: imx6: Skip controller_id generation logic for i.MX7D
PCI: imx6: Fetch dbi2 and iATU base addesses from DT
PCI: imx6: Configure PHY based on Root Complex or Endpoint mode
PCI: imx6: Add Refclk for i.MX95 PCIe
dt-bindings: PCI: fsl,imx6q-pcie: Add Refclk for i.MX95 RC
PCI: imx6: Add i.MX8Q PCIe Endpoint (EP) support
dt-bindings: PCI: fsl,imx6q-pcie-ep: Add compatible string fsl,imx8q-pcie-ep
# Conflicts:
# drivers/pci/controller/dwc/pci-imx6.c
|
|
- Fix potential string truncation in dw_pcie_edma_irq_verify() (Niklas
Cassel)
- Don't wait for link up in DWC core if driver can detect Link Up event
(Krishna chaitanya chundru)
- If qcom 'global' IRQ is supported for detection of Link Up events, tell
DWC core not to wait for link up (Krishna chaitanya chundru)
- Update ICC and OPP votes after Link Up events (Krishna chaitanya chundru)
- Use dw-rockchip dll_link_up IRQ to detect Link Up and enumerate devices
so users don't have to manually rescan (Niklas Cassel)
- In dw-rockchip, the 'sys' interrupt is required and detects Link Up
events, so tell DWC core not to wait for link up (Niklas Cassel)
- Always stop link in dw_pcie_suspend_noirq(), which is required at least
for i.MX8QM to re-establish link on resume (Richard Zhu)
- Drop racy and unnecessary LTSSM state check before sending PME_TURN_OFF
message in dw_pcie_suspend_noirq() (Richard Zhu)
- Add stubs for dw_pcie_suspend_noirq() dw_pcie_resume_noirq() when
CONFIG_PCIE_DW_HOST is not defined so drivers don't need #ifdefs (Bjorn
Helgaas)
- Use DWC core suspend/resume functions for imx6 (Frank Li)
- Add imx6 suspend/resume support for i.MX8MQ, i.MX8Q, and i.MX95 (Richard
Zhu)
- Add struct of_pci_range.parent_bus_addr for devices that need their
immediate parent bus address, not the CPU address, e.g., to program an
internal Address Translation Unit (iATU) (Frank Li)
* pci/controller/dwc:
PCI: dwc: Simplify config resource lookup
of: address: Add parent_bus_addr to struct of_pci_range
PCI: imx6: Add i.MX8MQ, i.MX8Q and i.MX95 PM support
PCI: imx6: Use DWC common suspend resume method
PCI: dwc: Add dw_pcie_suspend_noirq(), dw_pcie_resume_noirq() stubs for !CONFIG_PCIE_DW_HOST
PCI: dwc: Remove LTSSM state test in dw_pcie_suspend_noirq()
PCI: dwc: Always stop link in the dw_pcie_suspend_noirq
PCI: dw-rockchip: Don't wait for link since we can detect Link Up
PCI: dw-rockchip: Enumerate endpoints based on dll_link_up IRQ
PCI: qcom: Update ICC and OPP values after Link Up event
PCI: qcom: Don't wait for link if we can detect Link Up
PCI: dwc: Don't wait for link up if driver can detect Link Up event
PCI: dwc: Fix potential truncation in dw_pcie_edma_irq_verify()
# Conflicts:
# drivers/pci/controller/dwc/pci-imx6.c
|
|
- Simplify by using syscon_regmap_lookup_by_phandle_args() instead of
syscon_regmap_lookup_by_phandle() followed by
of_parse_phandle_with_fixed_args() or of_property_read_u32_index()
(Krzysztof Kozlowski)
* pci/controller/dra7xx:
PCI: dra7xx: Use syscon_regmap_lookup_by_phandle_args
|
|
- Add host bridge .enable_device() and .disable_device() hooks for bridges
that need to configure things like Requester ID to StreamID mapping when
enabling devices (Frank Li)
- Add imx6 Requester ID to StreamID mapping configuration when enabling
devices (Frank Li)
- Extend struct pci_ecam_ops with .enable_device() and .disable_device()
hooks so drivers that use pci_host_common_probe() instead of their own
.probe() have a way to set the .enable_device() callbacks (Marc Zyngier)
- Convert pcie-apple StreamID mapping configuration from a bus notifier to
the .enable_device() and .disable_device() callbacks (Marc Zyngier)
* pci/controller/iommu-map:
PCI: apple: Convert to {en,dis}able_device() callbacks
PCI: host-generic: Allow {en,dis}able_device() to be provided via pci_ecam_ops
PCI: imx6: Add IOMMU and ITS MSI support for i.MX95
PCI: Add enable_device() and disable_device() callbacks for bridges
|
|
- Convert mobiveil-pcie.txt to YAML and update 'interrupt-names' and
'reg-names' (Frank Li)
- Add qcom DT SM8550 and SM8650 optional 'global' interrupt for link events
(Neil Armstrong)
- Add qcom DT 'compatible' strings for IPQ5424 PCIe controller (Manikanta
Mylavarapu)
* pci/dt-bindings:
dt-bindings: PCI: qcom: Document the IPQ5424 PCIe controller
dt-bindings: PCI: qcom,pcie-sm8550: Document 'global' interrupt
dt-bindings: PCI: mobiveil: Convert mobiveil-pcie.txt to YAML
|
|
- Clear pci-epf-test dma_chan_rx, not dma_chan_tx, after freeing
dma_chan_rx (Mohamed Khalfella)
- Correct the DMA MEMCPY test so it doesn't fail if the Endpoint supports
both DMA_PRIVATE and DMA_MEMCPY (Manivannan Sadhasivam)
- Add pci-epf-test and pci_endpoint_test support for capabilities (Niklas
Cassel)
- Add Endpoint test for consecutive BARs (Niklas Cassel)
- Remove redundant comparison from Endpoint BAR test because a > 1MB BAR
can always be exactly covered by iterating with a 1MB buffer (Hans Zhang)
- Correct the PCI Endpoint test IOCTL return value (Manivannan Sadhasivam)
- Move PCI Endpoint tests from tools/pci to Kselftests (Manivannan
Sadhasivam)
- Convert PCI Endpoint tests to the Kselftest framework (Manivannan
Sadhasivam)
* pci/endpoint-test:
selftests: pci_endpoint: Migrate to Kselftest framework
selftests: Move PCI Endpoint tests from tools/pci to Kselftests
misc: pci_endpoint_test: Fix IOCTL return value
misc: pci_endpoint_test: Remove redundant 'remainder' test
misc: pci_endpoint_test: Add consecutive BAR test
misc: pci_endpoint_test: Add support for capabilities
PCI: endpoint: pci-epf-test: Add support for capabilities
PCI: endpoint: pci-epf-test: Fix check for DMA MEMCPY test
PCI: endpoint: pci-epf-test: Set dma_chan_rx pointer to NULL on error
|
|
- Destroy the EPC device in devm_pci_epc_destroy(), which previously didn't
call devres_release() (Zijun Hu)
- Simplify pci_epc_get() with class_find_device_by_name() (Zijun Hu)
- Finish virtual EP removal in pci_epf_remove_vepf(), which previously
caused a subsequent pci_epf_add_vepf() to fail with -EBUSY (Zijun Hu)
- Write BAR_MASK before iATU registers in pci_epc_set_bar() so we don't
depend on the BAR_MASK reset value being larger than the requested BAR
size (Niklas Cassel)
- Prevent changing BAR size/flags in pci_epc_set_bar() to prevent reads
from bypassing the iATU if we reduced the BAR size (Niklas Cassel)
- Verify address alignment when programming iATU so we don't attempt to
write bits that are read-only because of the BAR size, which could lead
to directing accesses to the wrong address (Niklas Cassel)
- Implement artpec6 pci_epc_features so we can rely on all drivers
supporting it so we can use it in EPC core code (Niklas Cassel)
- Check for BARs of fixed size to prevent endpoint drivers from trying to
change their size (Niklas Cassel)
- Verify that requested BAR size is a power of two when endpoint driver
sets the BAR (Niklas Cassel)
* pci/endpoint:
PCI: endpoint: Verify that requested BAR size is a power of two
PCI: endpoint: Add size check for fixed size BARs in pci_epc_set_bar()
PCI: artpec6: Implement dw_pcie_ep operation get_features
PCI: dwc: ep: Add 'address' alignment to 'size' check in dw_pcie_prog_ep_inbound_atu()
PCI: dwc: ep: Prevent changing BAR size/flags in pci_epc_set_bar()
PCI: dwc: ep: Write BAR_MASK before iATU registers in pci_epc_set_bar()
PCI: endpoint: Finish virtual EP removal in pci_epf_remove_vepf()
PCI: endpoint: Simplify pci_epc_get()
PCI: endpoint: Destroy the EPC device in devm_pci_epc_destroy()
PCI: endpoint: Replace magic number '6' by PCI_STD_NUM_BARS
|
|
- Add Microchip PCI100X device IDs (Rakesh Babu Saladi)
* pci/switchtec:
PCI: switchtec: Add Microchip PCI100X device IDs
|
|
- Avoid D3 for Root Ports on TUXEDO Sirius Gen1 with old BIOS because the
system can't wake up from suspend (Werner Sembach)
* pci/pm:
PCI: Avoid putting some root ports into D3 on TUXEDO Sirius Gen1
|
|
- Move reset related sysfs code from pci.c to pci-sysfs.c where other
similar code lives (Ilpo Järvinen)
- Simplify reset_method_store() memory management by using __free() instead
of explicit kfree() cleanup (Ilpo Järvinen)
- Drop unnecessary zero initializer (Ilpo Järvinen)
* pci/pci-sysfs:
PCI/sysfs: Remove unnecessary zero in initializer
PCI/sysfs: Use __free() in reset_method_store()
PCI/sysfs: Move reset related sysfs code to correct file
|
|
- Unexport of_pci_parse_bus_range() since it's only used in of.c (Bjorn
Helgaas)
- Drop 'No bus range found' message so we don't complain when DTs don't
specify the default 'bus-range = <0x00 0xff>' (Bjorn Helgaas)
- Simplify devm_of_pci_get_host_bridge_resources() interface by dropping
parameters that are always the same default values (Bjorn Helgaas)
- Update comment reference to of_pci_get_host_bridge_resources(), which no
longer exists (Bjorn Helgaas)
- Rename the drivers/pci/of_property.c struct of_pci_range to
of_pci_range_entry to avoid confusion with the global of_pci_range in
include/linux/of_address.h (Bjorn Helgaas)
* pci/of:
PCI: of_property: Rename struct of_pci_range to of_pci_range_entry
sparc/PCI: Update reference to devm_of_pci_get_host_bridge_resources()
PCI: of: Simplify devm_of_pci_get_host_bridge_resources() interface
PCI: of: Drop 'No bus range found' message
PCI: Unexport of_pci_parse_bus_range()
|
|
- Unexport pcie_read_tlp_log() to encourage drivers to use PCI core logging
rather than building their own (Ilpo Järvinen)
- Move TLP Log handling to its own file (Ilpo Järvinen)
- Add #defines for TLP Header/Prefix log sizes (Ilpo Järvinen)
- Store number of supported End-End TLP Prefixes always so we can read the
correct number of DWORDs from the TLP Prefix Log (Ilpo Järvinen)
- Read TLP Prefixes in addition to the Header Log in pcie_read_tlp_log()
(Ilpo Järvinen)
- Add pcie_print_tlp_log() to consolidate printing of TLP Header and Prefix
Log (Ilpo Järvinen)
* pci/err:
PCI: Add pcie_print_tlp_log() to print TLP Header and Prefix Log
PCI: Add TLP Prefix reading to pcie_read_tlp_log()
PCI: Store number of supported End-End TLP Prefixes
PCI: Use unsigned int i in pcie_read_tlp_log()
PCI: Use same names in pcie_read_tlp_log() prototype and definition
PCI: Add defines for TLP Header/Prefix log sizes
PCI: Move TLP Log handling to its own file
PCI: Don't expose pcie_read_tlp_log() outside PCI subsystem
|
|
- Batch sizing of multiple BARs while memory decoding is disabled instead
of disabling/enabling decoding for each BAR individually; this optimizes
virtualized environments where toggling decoding enable is expensive
(Alex Williamson)
* pci/enumeration:
PCI: Batch BAR sizing operations
|
|
- Quirk the Intel Raptor Lake-P PIO log size to accommodate vendor BIOSes
that don't configure it correctly (Takashi Iwai)
* pci/dpc:
PCI/DPC: Quirk PIO log size for Intel Raptor Lake-P
|
|
- Update resource request API documentation to encourage callers to supply
a driver name when requesting resources (Philipp Stanner)
- Export pci_intx_unmanaged() and pcim_intx() (always managed) so callers
of pci_intx() (which is sometimes managed) can explicitly choose the one
they need (Philipp Stanner)
- Convert drivers from pci_intx() to always-managed pcim_intx() or
never-managed pci_intx_unmanaged(): amd_sfh, ata (ahci, ata_piix,
pata_rdc, sata_sil24, sata_sis, sata_uli, sata_vsc), bnx2x, bna, ntb,
qtnfmac, rtsx, tifm_7xx1, vfio, xen-pciback (Philipp Stanner)
- Remove pci_intx_unmanaged() since pci_intx() is now always unmanaged and
pcim_intx() is always managed (Philipp Stanner)
* pci/devres:
PCI: Remove devres from pci_intx()
net/ethernet: Use never-managed version of pci_intx()
HID: amd_sfh: Use always-managed version of pcim_intx()
wifi: qtnfmac: use always-managed version of pcim_intx()
ata: Use always-managed version of pci_intx()
PCI/MSI: Use never-managed version of pci_intx()
vfio/pci: Use never-managed version of pci_intx()
misc: Use never-managed version of pci_intx()
ntb: Use never-managed version of pci_intx()
drivers/xen: Use never-managed version of pci_intx()
PCI: Export pci_intx_unmanaged() and pcim_intx()
PCI: Encourage resource request API users to supply driver name
|
|
- Save parent L1 PM Substates config so when we restore it along with an
endpoint's config, the parent info isn't junk (Jian-Hong Pan)
* pci/aspm:
PCI/ASPM: Save parent L1SS config in pci_save_aspm_l1ss_state()
|
|
Just allow passing in NULL for the cache, if the type in question
doesn't have a cache associated with it.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
init_once is called when an object doesn't come from the cache, and
hence needs initial clearing of certain members. While the whole
struct could get cleared by memset() in that case, a few of the cache
members are large enough that this may cause unnecessary overhead if
the caches used aren't large enough to satisfy the workload. For those
cases, some churn of kmalloc+kfree is to be expected.
Ensure that the 3 users that need clearing put the members they need
cleared at the start of the struct, and wrap the rest of the struct in
a struct group so the offset is known.
While at it, improve the interaction with KASAN such that when/if
KASAN writes to members inside the struct that should be retained over
caching, it won't trip over itself. For rw and net, the retaining of
the iovec over caching is disabled if KASAN is enabled. A helper will
free and clear those members in that case.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
