| Age | Commit message (Collapse) | Author |
|---|
|
The switch global port interrupt mask, REG_SW_PORT_INT_MASK__4, is
defined as 0x001C in ksz9477_reg.h. The designers used 32-bit value in
anticipation for increase of port count in future product but currently
the maximum port count is 7 and the effective value is 0x7F in register
0x001F. Each port has its own interrupt mask and is defined as 0x#01F.
It uses only 4 bits for different interrupts.
The developer who implemented the current interrupt mechanism in the
switch driver noticed there are similarities between the mechanism to
mask port interrupts in global interrupt and individual interrupts in
each port and so used the same code to handle these interrupts. He
updated the code to use the new macro REG_SW_PORT_INT_MASK__1 which is
defined as 0x1F in ksz_common.h but he forgot to update the 32-bit write
to 8-bit as now the mask registers are 0x1F and 0x#01F.
In addition all KSZ switches other than the KSZ9897/KSZ9893 and LAN937X
families use only 8-bit access and so this common code will eventually
be changed to accommodate them.
Fixes: e1add7dd6183 ("net: dsa: microchip: use common irq routines for girq and pirq")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Link: https://lore.kernel.org/r/1719009262-2948-1-git-send-email-Tristram.Ha@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When dmaengine supports pause function, in suspend state,
dmaengine_pause() is called instead of dmaengine_terminate_async(),
In end of playback stream, the runtime->state will go to
SNDRV_PCM_STATE_DRAINING, if system suspend & resume happen
at this time, application will not resume playback stream, the
stream will be closed directly, the dmaengine_terminate_async()
will not be called before the dmaengine_synchronize(), which
violates the call sequence for dmaengine_synchronize().
This behavior also happens for capture streams, but there is no
SNDRV_PCM_STATE_DRAINING state for capture. So use
dmaengine_tx_status() to check the DMA status if the status is
DMA_PAUSED, then call dmaengine_terminate_async() to terminate
dmaengine before dmaengine_synchronize().
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/1718851218-27803-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This HP Laptop uses ALC236 codec with COEF 0x07 controlling
the mute LED. Enable existing quirk for this device.
Signed-off-by: Aivaz Latypov <reichaivaz@gmail.com>
Link: https://patch.msgid.link/20240625081217.1049-1-reichaivaz@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
snd_pcm_resume() should bail out if the stream isn't in a suspended
state. Otherwise it'd allow doubly resume.
Link: https://patch.msgid.link/20240624125443.27808-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The conversion from the legacy event to MIDI2 UMP for RPN and NRPN
missed the setup of the channel number, resulting in always the
channel 0. Fix it.
Fixes: e9e02819a98a ("ALSA: seq: Automatic conversion of UMP events")
Link: https://patch.msgid.link/20240625095200.25745-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When bonding is configured in BOND_MODE_BROADCAST mode, if two identical
SYN packets are received at the same time and processed on different CPUs,
it can potentially create the same sk (sock) but two different reqsk
(request_sock) in tcp_conn_request().
These two different reqsk will respond with two SYNACK packets, and since
the generation of the seq (ISN) incorporates a timestamp, the final two
SYNACK packets will have different seq values.
The consequence is that when the Client receives and replies with an ACK
to the earlier SYNACK packet, we will reset(RST) it.
========================================================================
This behavior is consistently reproducible in my local setup,
which comprises:
| NETA1 ------ NETB1 |
PC_A --- bond --- | | --- bond --- PC_B
| NETA2 ------ NETB2 |
- PC_A is the Server and has two network cards, NETA1 and NETA2. I have
bonded these two cards using BOND_MODE_BROADCAST mode and configured
them to be handled by different CPU.
- PC_B is the Client, also equipped with two network cards, NETB1 and
NETB2, which are also bonded and configured in BOND_MODE_BROADCAST mode.
If the client attempts a TCP connection to the server, it might encounter
a failure. Capturing packets from the server side reveals:
10.10.10.10.45182 > localhost: Flags [S], seq 320236027,
10.10.10.10.45182 > localhost: Flags [S], seq 320236027,
localhost > 10.10.10.10.45182: Flags [S.], seq 2967855116,
localhost > 10.10.10.10.45182: Flags [S.], seq 2967855123, <==
10.10.10.10.45182 > localhost: Flags [.], ack 4294967290,
10.10.10.10.45182 > localhost: Flags [.], ack 4294967290,
localhost > 10.10.10.10.45182: Flags [R], seq 2967855117, <==
localhost > 10.10.10.10.45182: Flags [R], seq 2967855117,
Two SYNACKs with different seq numbers are sent by localhost,
resulting in an anomaly.
========================================================================
The attempted solution is as follows:
Add a return value to inet_csk_reqsk_queue_hash_add() to confirm if the
ehash insertion is successful (Up to now, the reason for unsuccessful
insertion is that a reqsk for the same connection has already been
inserted). If the insertion fails, release the reqsk.
Due to the refcnt, Kuniyuki suggests also adding a return value check
for the DCCP module; if ehash insertion fails, indicating a successful
insertion of the same connection, simply release the reqsk as well.
Simultaneously, In the reqsk_queue_hash_req(), the start of the
req->rsk_timer is adjusted to be after successful insertion.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: luoxuanqiang <luoxuanqiang@kylinos.cn>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240621013929.1386815-1-luoxuanqiang@kylinos.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Below is a summary of how the driver stores a reference to an skb during
transmit:
tx_buff[free_map[consumer_index]]->skb = new_skb;
free_map[consumer_index] = IBMVNIC_INVALID_MAP;
consumer_index ++;
Where variable data looks like this:
free_map == [4, IBMVNIC_INVALID_MAP, IBMVNIC_INVALID_MAP, 0, 3]
consumer_index^
tx_buff == [skb=null, skb=<ptr>, skb=<ptr>, skb=null, skb=null]
The driver has checks to ensure that free_map[consumer_index] pointed to
a valid index but there was no check to ensure that this index pointed
to an unused/null skb address. So, if, by some chance, our free_map and
tx_buff lists become out of sync then we were previously risking an
skb memory leak. This could then cause tcp congestion control to stop
sending packets, eventually leading to ETIMEDOUT.
Therefore, add a conditional to ensure that the skb address is null. If
not then warn the user (because this is still a bug that should be
patched) and free the old pointer to prevent memleak/tcp problems.
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The requirement that the head page be passed to do_set_pmd() was added in
commit ef37b2ea08ac ("mm/memory: page_add_file_rmap() ->
folio_add_file_rmap_[pte|pmd]()") and prevents pmd-mapping in the
finish_fault() and filemap_map_pages() paths if the page to be inserted is
anything but the head page for an otherwise suitable vma and pmd-sized
page.
Matthew said:
: We're going to stop using PMDs to map large folios unless the fault is
: within the first 4KiB of the PMD. No idea how many workloads that
: affects, but it only needs to be backported as far as v6.8, so we may
: as well backport it.
Link: https://lkml.kernel.org/r/20240611153216.2794513-1-abrestic@rivosinc.com
Fixes: ef37b2ea08ac ("mm/memory: page_add_file_rmap() -> folio_add_file_rmap_[pte|pmd]()")
Signed-off-by: Andrew Bresticker <abrestic@rivosinc.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since commit 5d0a661d808f ("mm/page_alloc: use only one PCP list for
THP-sized allocations") no longer differentiates the migration type of
pages in THP-sized PCP list, it's possible that non-movable allocation
requests may get a CMA page from the list, in some cases, it's not
acceptable.
If a large number of CMA memory are configured in system (for example, the
CMA memory accounts for 50% of the system memory), starting a virtual
machine with device passthrough will get stuck. During starting the
virtual machine, it will call pin_user_pages_remote(..., FOLL_LONGTERM,
...) to pin memory. Normally if a page is present and in CMA area,
pin_user_pages_remote() will migrate the page from CMA area to non-CMA
area because of FOLL_LONGTERM flag. But if non-movable allocation
requests return CMA memory, migrate_longterm_unpinnable_pages() will
migrate a CMA page to another CMA page, which will fail to pass the check
in check_and_migrate_movable_pages() and cause migration endless.
Call trace:
pin_user_pages_remote
--__gup_longterm_locked // endless loops in this function
----_get_user_pages_locked
----check_and_migrate_movable_pages
------migrate_longterm_unpinnable_pages
--------alloc_migration_target
This problem will also have a negative impact on CMA itself. For example,
when CMA is borrowed by THP, and we need to reclaim it through cma_alloc()
or dma_alloc_coherent(), we must move those pages out to ensure CMA's
users can retrieve that contigous memory. Currently, CMA's memory is
occupied by non-movable pages, meaning we can't relocate them. As a
result, cma_alloc() is more likely to fail.
To fix the problem above, we add one PCP list for THP, which will not
introduce a new cacheline for struct per_cpu_pages. THP will have 2 PCP
lists, one PCP list is used by MOVABLE allocation, and the other PCP list
is used by UNMOVABLE allocation. MOVABLE allocation contains GPF_MOVABLE,
and UNMOVABLE allocation contains GFP_UNMOVABLE and GFP_RECLAIMABLE.
Link: https://lkml.kernel.org/r/1718845190-4456-1-git-send-email-yangge1116@126.com
Fixes: 5d0a661d808f ("mm/page_alloc: use only one PCP list for THP-sized allocations")
Signed-off-by: yangge <yangge1116@126.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since commit 2282679fb20b ("mm: submit multipage write for SWP_FS_OPS
swap-space"), we can plug multiple pages then unplug them all together.
That means iov_iter_count(iter) could be way bigger than PAGE_SIZE, it
actually equals the size of iov_iter_npages(iter, INT_MAX).
Note this issue has nothing to do with large folios as we don't support
THP_SWPOUT to non-block devices.
[v-songbaohua@oppo.com: figure out the cause and correct the commit message]
Link: https://lkml.kernel.org/r/20240618065647.21791-1-21cnbao@gmail.com
Fixes: 2282679fb20b ("mm: submit multipage write for SWP_FS_OPS swap-space")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Closes: https://lore.kernel.org/linux-mm/20240617053201.GA16852@lst.de/
Reviewed-by: Martin Wege <martin.l.wege@gmail.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Steve French <sfrench@samba.org>
Cc: Trond Myklebust <trondmy@kernel.org>
Cc: Chuanhua Han <hanchuanhua@oppo.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
As Ying pointed out in [1], stats->nr_thp_failed needs to be updated to
avoid stats inconsistency between MIGRATE_SYNC and MIGRATE_ASYNC when
calling migrate_pages_batch().
Because if not, when migrate_pages_batch() is called via
migrate_pages(MIGRATE_ASYNC), nr_thp_failed will not be increased and when
migrate_pages_batch() is called via migrate_pages(MIGRATE_SYNC*),
nr_thp_failed will be increase in migrate_pages_sync() by
stats->nr_thp_failed += astats.nr_thp_split.
[1] https://lore.kernel.org/linux-mm/87msnq7key.fsf@yhuang6-desk2.ccr.corp.intel.com/
Link: https://lkml.kernel.org/r/20240620012712.19804-1-zi.yan@sent.com
Link: https://lkml.kernel.org/r/20240618134151.29214-1-zi.yan@sent.com
Fixes: 7262f208ca68 ("mm/migrate: split source folio if it is on deferred split list")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Suggested-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Git hosting for the test suite has been migrated from Gitlab to Codeberg,
given the "less hostile environment".
Link: https://lkml.kernel.org/r/20240618133556.105604-1-jarkko@kernel.org
Link: https://codeberg.org/jarkko/linux-tpmdd-test
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After calling fork() in test_prctl_fork_exec(), the global variable
ksm_full_scans_fd is initialized to 0 in the child process upon entering
the main function of ./ksm_functional_tests.
In the function call chain test_child_ksm() -> __mmap_and_merge_range ->
ksm_merge-> ksm_get_full_scans, start_scans = ksm_get_full_scans() will
return an error. Therefore, the value of ksm_full_scans_fd needs to be
initialized before calling test_child_ksm in the child process.
Link: https://lkml.kernel.org/r/20240617052934.5834-1-shechenglong001@gmail.com
Signed-off-by: aigourensheng <shechenglong001@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Changing PG_slab from a page flag to a page type in commit 46df8e73a4a3
("mm: free up PG_slab") in has the unintended consequence of removing the
PG_slab constant from kernel debuginfo. The commit does add the value to
the vmcoreinfo note, which allows debuggers to find the value without
hardcoding it. However it's most flexible to continue representing the
constant with an enum. To that end, convert the page type fields into an
enum. Debuggers will now be able to detect that PG_slab's type has
changed from enum pageflags to enum pagetype.
Link: https://lkml.kernel.org/r/20240607202954.1198180-1-stephen.s.brennan@oracle.com
Fixes: 46df8e73a4a3 ("mm: free up PG_slab")
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hao Ge <gehao@kylinos.cn>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Omar Sandoval <osandov@osandov.com>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The code in ocfs2_dio_end_io_write() estimates number of necessary
transaction credits using ocfs2_calc_extend_credits(). This however does
not take into account that the IO could be arbitrarily large and can
contain arbitrary number of extents.
Extent tree manipulations do often extend the current transaction but not
in all of the cases. For example if we have only single block extents in
the tree, ocfs2_mark_extent_written() will end up calling
ocfs2_replace_extent_rec() all the time and we will never extend the
current transaction and eventually exhaust all the transaction credits if
the IO contains many single block extents. Once that happens a
WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in
jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to
this error. This was actually triggered by one of our customers on a
heavily fragmented OCFS2 filesystem.
To fix the issue make sure the transaction always has enough credits for
one extent insert before each call of ocfs2_mark_extent_written().
Heming Zhao said:
------
PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error"
PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA"
#0 machine_kexec at ffffffff8c069932
#1 __crash_kexec at ffffffff8c1338fa
#2 panic at ffffffff8c1d69b9
#3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2]
#4 __ocfs2_abort at ffffffffc0c88387 [ocfs2]
#5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2]
#6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2]
#7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2]
#8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2]
#9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2]
#10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2]
#11 dio_complete at ffffffff8c2b9fa7
#12 do_blockdev_direct_IO at ffffffff8c2bc09f
#13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2]
#14 generic_file_direct_write at ffffffff8c1dcf14
#15 __generic_file_write_iter at ffffffff8c1dd07b
#16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2]
#17 aio_write at ffffffff8c2cc72e
#18 kmem_cache_alloc at ffffffff8c248dde
#19 do_io_submit at ffffffff8c2ccada
#20 do_syscall_64 at ffffffff8c004984
#21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba
Link: https://lkml.kernel.org/r/20240617095543.6971-1-jack@suse.cz
Link: https://lkml.kernel.org/r/20240614145243.8837-1-jack@suse.cz
Fixes: c15471f79506 ("ocfs2: fix sparse file & data ordering issue in direct io")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Heming Zhao <heming.zhao@suse.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 29d7355a9d05 ("kasan: save alloc stack traces for mempool") messed
up one of the calls to unpoison_slab_object: the last two arguments are
supposed to be GFP flags and whether to init the object memory.
Fix the call.
Without this fix, __kasan_mempool_unpoison_object provides the object's
size as GFP flags to unpoison_slab_object, which can cause LOCKDEP reports
(and probably other issues).
Link: https://lkml.kernel.org/r/20240614143238.60323-1-andrey.konovalov@linux.dev
Fixes: 29d7355a9d05 ("kasan: save alloc stack traces for mempool")
Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com>
Reported-by: Brad Spengler <spender@grsecurity.net>
Acked-by: Marco Elver <elver@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
During compaction isolated free pages are marked allocated so that they
can be split and/or freed. For that, post_alloc_hook() is used inside
split_map_pages() and release_free_list(). split_map_pages() marks free
pages allocated, splits the pages and then lets
alloc_contig_range_noprof() free those pages. release_free_list() marks
free pages and immediately frees them. This usage of post_alloc_hook()
affect memory allocation profiling because these functions might not be
called from an instrumented allocator, therefore current->alloc_tag is
NULL and when debugging is enabled (CONFIG_MEM_ALLOC_PROFILING_DEBUG=y)
that causes warnings. To avoid that, wrap such post_alloc_hook() calls
into an instrumented function which acts as an allocator which will be
charged for these fake allocations. Note that these allocations are very
short lived until they are freed, therefore the associated counters should
usually read 0.
Link: https://lkml.kernel.org/r/20240614230504.3849136-1-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Sourav Panda <souravpanda@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
slab_post_alloc_hook() uses prepare_slab_obj_exts_hook() to obtain
slabobj_ext object. Currently the only user of slabobj_ext object in this
path is memory allocation profiling, therefore when it's not enabled this
object is not needed. This also generates a warning when compiling with
CONFIG_MEM_ALLOC_PROFILING=n. Move the code under this configuration to
fix the warning. If more slabobj_ext users appear in the future, the code
will have to be changed back to call prepare_slab_obj_exts_hook().
Link: https://lkml.kernel.org/r/20240614225951.3845577-1-surenb@google.com
Fixes: 4b8736964640 ("mm/slab: add allocation accounting into slab allocation and free paths")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406150444.F6neSaiy-lkp@intel.com/
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Kees Cook <keescook@chromium.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add sl in /proc/pid/smaps to indicate vma is sealed
Link: https://lkml.kernel.org/r/20240614232014.806352-2-jeffxu@google.com
Fixes: 8be7258aad44 ("mseal: add mseal syscall")
Signed-off-by: Jeff Xu <jeffxu@chromium.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jorge Lucangeli Obes <jorgelo@chromium.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Stephen Röttger <sroettger@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
xa_for_each() in _vm_unmap_aliases() loops through all vbs. However,
since commit 062eacf57ad9 ("mm: vmalloc: remove a global vmap_blocks
xarray") the vb from xarray may not be on the corresponding CPU
vmap_block_queue. Consequently, purge_fragmented_block() might use the
wrong vbq->lock to protect the free list, leading to vbq->free breakage.
Incorrect lock protection can exhaust all vmalloc space as follows:
CPU0 CPU1
+--------------------------------------------+
| +--------------------+ +-----+ |
+--> | |---->| |------+
| CPU1:vbq free_list | | vb1 |
+--- | |<----| |<-----+
| +--------------------+ +-----+ |
+--------------------------------------------+
_vm_unmap_aliases() vb_alloc()
new_vmap_block()
xa_for_each(&vbq->vmap_blocks, idx, vb)
--> vb in CPU1:vbq->freelist
purge_fragmented_block(vb)
spin_lock(&vbq->lock) spin_lock(&vbq->lock)
--> use CPU0:vbq->lock --> use CPU1:vbq->lock
list_del_rcu(&vb->free_list) list_add_tail_rcu(&vb->free_list, &vbq->free)
__list_del(vb->prev, vb->next)
next->prev = prev
+--------------------+
| |
| CPU1:vbq free_list |
+---| |<--+
| +--------------------+ |
+----------------------------+
__list_add(new, head->prev, head)
+--------------------------------------------+
| +--------------------+ +-----+ |
+--> | |---->| |------+
| CPU1:vbq free_list | | vb2 |
+--- | |<----| |<-----+
| +--------------------+ +-----+ |
+--------------------------------------------+
prev->next = next
+--------------------------------------------+
|----------------------------+ |
| +--------------------+ | +-----+ |
+--> | |--+ | |------+
| CPU1:vbq free_list | | vb2 |
+--- | |<----| |<-----+
| +--------------------+ +-----+ |
+--------------------------------------------+
Here’s a list breakdown. All vbs, which were to be added to
‘prev’, cannot be used by list_for_each_entry_rcu(vb, &vbq->free,
free_list) in vb_alloc(). Thus, vmalloc space is exhausted.
This issue affects both erofs and f2fs, the stacktrace is as follows:
erofs:
[<ffffffd4ffb93ad4>] __switch_to+0x174
[<ffffffd4ffb942f0>] __schedule+0x624
[<ffffffd4ffb946f4>] schedule+0x7c
[<ffffffd4ffb947cc>] schedule_preempt_disabled+0x24
[<ffffffd4ffb962ec>] __mutex_lock+0x374
[<ffffffd4ffb95998>] __mutex_lock_slowpath+0x14
[<ffffffd4ffb95954>] mutex_lock+0x24
[<ffffffd4fef2900c>] reclaim_and_purge_vmap_areas+0x44
[<ffffffd4fef25908>] alloc_vmap_area+0x2e0
[<ffffffd4fef24ea0>] vm_map_ram+0x1b0
[<ffffffd4ff1b46f4>] z_erofs_lz4_decompress+0x278
[<ffffffd4ff1b8ac4>] z_erofs_decompress_queue+0x650
[<ffffffd4ff1b8328>] z_erofs_runqueue+0x7f4
[<ffffffd4ff1b66a8>] z_erofs_read_folio+0x104
[<ffffffd4feeb6fec>] filemap_read_folio+0x6c
[<ffffffd4feeb68c4>] filemap_fault+0x300
[<ffffffd4fef0ecac>] __do_fault+0xc8
[<ffffffd4fef0c908>] handle_mm_fault+0xb38
[<ffffffd4ffb9f008>] do_page_fault+0x288
[<ffffffd4ffb9ed64>] do_translation_fault[jt]+0x40
[<ffffffd4fec39c78>] do_mem_abort+0x58
[<ffffffd4ffb8c3e4>] el0_ia+0x70
[<ffffffd4ffb8c260>] el0t_64_sync_handler[jt]+0xb0
[<ffffffd4fec11588>] ret_to_user[jt]+0x0
f2fs:
[<ffffffd4ffb93ad4>] __switch_to+0x174
[<ffffffd4ffb942f0>] __schedule+0x624
[<ffffffd4ffb946f4>] schedule+0x7c
[<ffffffd4ffb947cc>] schedule_preempt_disabled+0x24
[<ffffffd4ffb962ec>] __mutex_lock+0x374
[<ffffffd4ffb95998>] __mutex_lock_slowpath+0x14
[<ffffffd4ffb95954>] mutex_lock+0x24
[<ffffffd4fef2900c>] reclaim_and_purge_vmap_areas+0x44
[<ffffffd4fef25908>] alloc_vmap_area+0x2e0
[<ffffffd4fef24ea0>] vm_map_ram+0x1b0
[<ffffffd4ff1a3b60>] f2fs_prepare_decomp_mem+0x144
[<ffffffd4ff1a6c24>] f2fs_alloc_dic+0x264
[<ffffffd4ff175468>] f2fs_read_multi_pages+0x428
[<ffffffd4ff17b46c>] f2fs_mpage_readpages+0x314
[<ffffffd4ff1785c4>] f2fs_readahead+0x50
[<ffffffd4feec3384>] read_pages+0x80
[<ffffffd4feec32c0>] page_cache_ra_unbounded+0x1a0
[<ffffffd4feec39e8>] page_cache_ra_order+0x274
[<ffffffd4feeb6cec>] do_sync_mmap_readahead+0x11c
[<ffffffd4feeb6764>] filemap_fault+0x1a0
[<ffffffd4ff1423bc>] f2fs_filemap_fault+0x28
[<ffffffd4fef0ecac>] __do_fault+0xc8
[<ffffffd4fef0c908>] handle_mm_fault+0xb38
[<ffffffd4ffb9f008>] do_page_fault+0x288
[<ffffffd4ffb9ed64>] do_translation_fault[jt]+0x40
[<ffffffd4fec39c78>] do_mem_abort+0x58
[<ffffffd4ffb8c3e4>] el0_ia+0x70
[<ffffffd4ffb8c260>] el0t_64_sync_handler[jt]+0xb0
[<ffffffd4fec11588>] ret_to_user[jt]+0x0
To fix this, introducee cpu within vmap_block to record which this vb
belongs to.
Link: https://lkml.kernel.org/r/20240614021352.1822225-1-zhaoyang.huang@unisoc.com
Link: https://lkml.kernel.org/r/20240607023116.1720640-1-zhaoyang.huang@unisoc.com
Fixes: fc1e0d980037 ("mm/vmalloc: prevent stale TLBs in fully utilized blocks")
Signed-off-by: Zhaoyang Huang <zhaoyang.huang@unisoc.com>
Suggested-by: Hailong.Liu <hailong.liu@oppo.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Before SQPOLL was transitioned to managing its own task_work, the core
used TWA_SIGNAL_NO_IPI to ensure that task_work was processed. If not,
we can't be sure that all task_work is processed at SQPOLL thread exit
time.
Fixes: af5d68f8892f ("io_uring/sqpoll: manage task_work privately")
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When the intermediate CQE aux cache got removed, any usage of the this
member went away. As it isn't used anymore, kill it.
Fixes: 902ce82c2aa1 ("io_uring: get rid of intermediate aux cqe caches")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-06-24
We've added 12 non-merge commits during the last 10 day(s) which contain
a total of 10 files changed, 412 insertions(+), 16 deletions(-).
The main changes are:
1) Fix a BPF verifier issue validating may_goto with a negative offset,
from Alexei Starovoitov.
2) Fix a BPF verifier validation bug with may_goto combined with jump to
the first instruction, also from Alexei Starovoitov.
3) Fix a bug with overrunning reservations in BPF ring buffer,
from Daniel Borkmann.
4) Fix a bug in BPF verifier due to missing proper var_off setting related
to movsx instruction, from Yonghong Song.
5) Silence unnecessary syzkaller-triggered warning in __xdp_reg_mem_model(),
from Daniil Dulov.
* tag 'for-netdev' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
xdp: Remove WARN() from __xdp_reg_mem_model()
selftests/bpf: Add tests for may_goto with negative offset.
bpf: Fix may_goto with negative offset.
selftests/bpf: Add more ring buffer test coverage
bpf: Fix overrunning reservations in ringbuf
selftests/bpf: Tests with may_goto and jumps to the 1st insn
bpf: Fix the corner case with may_goto and jump to the 1st insn.
bpf: Update BPF LSM maintainer list
bpf: Fix remap of arena.
selftests/bpf: Add a few tests to cover
bpf: Add missed var_off setting in coerce_subreg_to_size_sx()
bpf: Add missed var_off setting in set_sext32_default_val()
====================
Link: https://patch.msgid.link/20240624124330.8401-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If during the quota disable we fail when cleaning the quota tree or when
deleting the root from the root tree, we jump to the 'out' label without
ever dropping the reference on the quota root, resulting in a leak of the
root since fs_info->quota_root is no longer pointing to the root (we have
set it to NULL just before those steps).
Fix this by always doing a btrfs_put_root() call under the 'out' label.
This is a problem that exists since qgroups were first added in 2012 by
commit bed92eae26cc ("Btrfs: qgroup implementation and prototypes"), but
back then we missed a kfree on the quota root and free_extent_buffer()
calls on its root and commit root nodes, since back then roots were not
yet reference counted.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
When running btrfs/060 with forced RST feature, it would crash the
following ASSERT() inside scrub_read_endio():
ASSERT(sector_nr < stripe->nr_sectors);
Before that, we would have tree dump from
btrfs_get_raid_extent_offset(), as we failed to find the RST entry for
the range.
[CAUSE]
Inside scrub_submit_extent_sector_read() every time we allocated a new
bbio we immediately called btrfs_map_block() to make sure there was some
RST range covering the scrub target.
But if btrfs_map_block() fails, we immediately call endio for the bbio,
while the bbio is newly allocated, it's completely empty.
Then inside scrub_read_endio(), we go through the bvecs to find
the sector number (as bi_sector is no longer reliable if the bio is
submitted to lower layers).
And since the bio is empty, such bvecs iteration would not find any
sector matching the sector, and return sector_nr == stripe->nr_sectors,
triggering the ASSERT().
[FIX]
Instead of calling btrfs_map_block() after allocating a new bbio, call
btrfs_map_block() first.
Since our only objective of calling btrfs_map_block() is only to update
stripe_len, there is really no need to do that after btrfs_alloc_bio().
This new timing would avoid the problem of handling empty bbio
completely, and in fact fixes a possible race window for the old code,
where if the submission thread is the only owner of the pending_io, the
scrub would never finish (since we didn't decrease the pending_io
counter).
Although the root cause of RST lookup failure still needs to be
addressed.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When creating a new block group, it calls btrfs_add_new_free_space() to add
the entire block group range into the free space accounting.
__btrfs_add_free_space_zoned() checks if size == block_group->length to
detect the initial free space adding, and proceed that case properly.
However, if the zone_capacity == zone_size and the over-write speed is fast
enough, the entire zone can be over-written within one transaction. That
confuses __btrfs_add_free_space_zoned() to handle it as an initial free
space accounting. As a result, that block group becomes a strange state: 0
used bytes, 0 zone_unusable bytes, but alloc_offset == zone_capacity (no
allocation anymore).
The initial free space accounting can properly be checked by checking
alloc_offset too.
Fixes: 98173255bddd ("btrfs: zoned: calculate free space from zone capacity")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
During inode logging (and log replay too), we are holding a transaction
handle and we often need to call btrfs_iget(), which will read an inode
from its subvolume btree if it's not loaded in memory and that results in
allocating an inode with GFP_KERNEL semantics at the btrfs_alloc_inode()
callback - and this may recurse into the filesystem in case we are under
memory pressure and attempt to commit the current transaction, resulting
in a deadlock since the logging (or log replay) task is holding a
transaction handle open.
Syzbot reported this with the following stack traces:
WARNING: possible circular locking dependency detected
6.10.0-rc2-syzkaller-00361-g061d1af7b030 #0 Not tainted
------------------------------------------------------
syz-executor.1/9919 is trying to acquire lock:
ffffffff8dd3aac0 (fs_reclaim){+.+.}-{0:0}, at: might_alloc include/linux/sched/mm.h:334 [inline]
ffffffff8dd3aac0 (fs_reclaim){+.+.}-{0:0}, at: slab_pre_alloc_hook mm/slub.c:3891 [inline]
ffffffff8dd3aac0 (fs_reclaim){+.+.}-{0:0}, at: slab_alloc_node mm/slub.c:3981 [inline]
ffffffff8dd3aac0 (fs_reclaim){+.+.}-{0:0}, at: kmem_cache_alloc_lru_noprof+0x58/0x2f0 mm/slub.c:4020
but task is already holding lock:
ffff88804b569358 (&ei->log_mutex){+.+.}-{3:3}, at: btrfs_log_inode+0x39c/0x4660 fs/btrfs/tree-log.c:6481
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (&ei->log_mutex){+.+.}-{3:3}:
__mutex_lock_common kernel/locking/mutex.c:608 [inline]
__mutex_lock+0x175/0x9c0 kernel/locking/mutex.c:752
btrfs_log_inode+0x39c/0x4660 fs/btrfs/tree-log.c:6481
btrfs_log_inode_parent+0x8cb/0x2a90 fs/btrfs/tree-log.c:7079
btrfs_log_dentry_safe+0x59/0x80 fs/btrfs/tree-log.c:7180
btrfs_sync_file+0x9c1/0xe10 fs/btrfs/file.c:1959
vfs_fsync_range+0x141/0x230 fs/sync.c:188
generic_write_sync include/linux/fs.h:2794 [inline]
btrfs_do_write_iter+0x584/0x10c0 fs/btrfs/file.c:1705
new_sync_write fs/read_write.c:497 [inline]
vfs_write+0x6b6/0x1140 fs/read_write.c:590
ksys_write+0x12f/0x260 fs/read_write.c:643
do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline]
__do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386
do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411
entry_SYSENTER_compat_after_hwframe+0x84/0x8e
-> #2 (btrfs_trans_num_extwriters){++++}-{0:0}:
join_transaction+0x164/0xf40 fs/btrfs/transaction.c:315
start_transaction+0x427/0x1a70 fs/btrfs/transaction.c:700
btrfs_commit_super+0xa1/0x110 fs/btrfs/disk-io.c:4170
close_ctree+0xcb0/0xf90 fs/btrfs/disk-io.c:4324
generic_shutdown_super+0x159/0x3d0 fs/super.c:642
kill_anon_super+0x3a/0x60 fs/super.c:1226
btrfs_kill_super+0x3b/0x50 fs/btrfs/super.c:2096
deactivate_locked_super+0xbe/0x1a0 fs/super.c:473
deactivate_super+0xde/0x100 fs/super.c:506
cleanup_mnt+0x222/0x450 fs/namespace.c:1267
task_work_run+0x14e/0x250 kernel/task_work.c:180
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
exit_to_user_mode_loop kernel/entry/common.c:114 [inline]
exit_to_user_mode_prepare include/linux/entry-common.h:328 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline]
syscall_exit_to_user_mode+0x278/0x2a0 kernel/entry/common.c:218
__do_fast_syscall_32+0x80/0x120 arch/x86/entry/common.c:389
do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411
entry_SYSENTER_compat_after_hwframe+0x84/0x8e
-> #1 (btrfs_trans_num_writers){++++}-{0:0}:
__lock_release kernel/locking/lockdep.c:5468 [inline]
lock_release+0x33e/0x6c0 kernel/locking/lockdep.c:5774
percpu_up_read include/linux/percpu-rwsem.h:99 [inline]
__sb_end_write include/linux/fs.h:1650 [inline]
sb_end_intwrite include/linux/fs.h:1767 [inline]
__btrfs_end_transaction+0x5ca/0x920 fs/btrfs/transaction.c:1071
btrfs_commit_inode_delayed_inode+0x228/0x330 fs/btrfs/delayed-inode.c:1301
btrfs_evict_inode+0x960/0xe80 fs/btrfs/inode.c:5291
evict+0x2ed/0x6c0 fs/inode.c:667
iput_final fs/inode.c:1741 [inline]
iput.part.0+0x5a8/0x7f0 fs/inode.c:1767
iput+0x5c/0x80 fs/inode.c:1757
dentry_unlink_inode+0x295/0x480 fs/dcache.c:400
__dentry_kill+0x1d0/0x600 fs/dcache.c:603
dput.part.0+0x4b1/0x9b0 fs/dcache.c:845
dput+0x1f/0x30 fs/dcache.c:835
ovl_stack_put+0x60/0x90 fs/overlayfs/util.c:132
ovl_destroy_inode+0xc6/0x190 fs/overlayfs/super.c:182
destroy_inode+0xc4/0x1b0 fs/inode.c:311
iput_final fs/inode.c:1741 [inline]
iput.part.0+0x5a8/0x7f0 fs/inode.c:1767
iput+0x5c/0x80 fs/inode.c:1757
dentry_unlink_inode+0x295/0x480 fs/dcache.c:400
__dentry_kill+0x1d0/0x600 fs/dcache.c:603
shrink_kill fs/dcache.c:1048 [inline]
shrink_dentry_list+0x140/0x5d0 fs/dcache.c:1075
prune_dcache_sb+0xeb/0x150 fs/dcache.c:1156
super_cache_scan+0x32a/0x550 fs/super.c:221
do_shrink_slab+0x44f/0x11c0 mm/shrinker.c:435
shrink_slab_memcg mm/shrinker.c:548 [inline]
shrink_slab+0xa87/0x1310 mm/shrinker.c:626
shrink_one+0x493/0x7c0 mm/vmscan.c:4790
shrink_many mm/vmscan.c:4851 [inline]
lru_gen_shrink_node+0x89f/0x1750 mm/vmscan.c:4951
shrink_node mm/vmscan.c:5910 [inline]
kswapd_shrink_node mm/vmscan.c:6720 [inline]
balance_pgdat+0x1105/0x1970 mm/vmscan.c:6911
kswapd+0x5ea/0xbf0 mm/vmscan.c:7180
kthread+0x2c1/0x3a0 kernel/kthread.c:389
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
-> #0 (fs_reclaim){+.+.}-{0:0}:
check_prev_add kernel/locking/lockdep.c:3134 [inline]
check_prevs_add kernel/locking/lockdep.c:3253 [inline]
validate_chain kernel/locking/lockdep.c:3869 [inline]
__lock_acquire+0x2478/0x3b30 kernel/locking/lockdep.c:5137
lock_acquire kernel/locking/lockdep.c:5754 [inline]
lock_acquire+0x1b1/0x560 kernel/locking/lockdep.c:5719
__fs_reclaim_acquire mm/page_alloc.c:3801 [inline]
fs_reclaim_acquire+0x102/0x160 mm/page_alloc.c:3815
might_alloc include/linux/sched/mm.h:334 [inline]
slab_pre_alloc_hook mm/slub.c:3891 [inline]
slab_alloc_node mm/slub.c:3981 [inline]
kmem_cache_alloc_lru_noprof+0x58/0x2f0 mm/slub.c:4020
btrfs_alloc_inode+0x118/0xb20 fs/btrfs/inode.c:8411
alloc_inode+0x5d/0x230 fs/inode.c:261
iget5_locked fs/inode.c:1235 [inline]
iget5_locked+0x1c9/0x2c0 fs/inode.c:1228
btrfs_iget_locked fs/btrfs/inode.c:5590 [inline]
btrfs_iget_path fs/btrfs/inode.c:5607 [inline]
btrfs_iget+0xfb/0x230 fs/btrfs/inode.c:5636
add_conflicting_inode fs/btrfs/tree-log.c:5657 [inline]
copy_inode_items_to_log+0x1039/0x1e30 fs/btrfs/tree-log.c:5928
btrfs_log_inode+0xa48/0x4660 fs/btrfs/tree-log.c:6592
log_new_delayed_dentries fs/btrfs/tree-log.c:6363 [inline]
btrfs_log_inode+0x27dd/0x4660 fs/btrfs/tree-log.c:6718
btrfs_log_all_parents fs/btrfs/tree-log.c:6833 [inline]
btrfs_log_inode_parent+0x22ba/0x2a90 fs/btrfs/tree-log.c:7141
btrfs_log_dentry_safe+0x59/0x80 fs/btrfs/tree-log.c:7180
btrfs_sync_file+0x9c1/0xe10 fs/btrfs/file.c:1959
vfs_fsync_range+0x141/0x230 fs/sync.c:188
generic_write_sync include/linux/fs.h:2794 [inline]
btrfs_do_write_iter+0x584/0x10c0 fs/btrfs/file.c:1705
do_iter_readv_writev+0x504/0x780 fs/read_write.c:741
vfs_writev+0x36f/0xde0 fs/read_write.c:971
do_pwritev+0x1b2/0x260 fs/read_write.c:1072
__do_compat_sys_pwritev2 fs/read_write.c:1218 [inline]
__se_compat_sys_pwritev2 fs/read_write.c:1210 [inline]
__ia32_compat_sys_pwritev2+0x121/0x1b0 fs/read_write.c:1210
do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline]
__do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386
do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411
entry_SYSENTER_compat_after_hwframe+0x84/0x8e
other info that might help us debug this:
Chain exists of:
fs_reclaim --> btrfs_trans_num_extwriters --> &ei->log_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&ei->log_mutex);
lock(btrfs_trans_num_extwriters);
lock(&ei->log_mutex);
lock(fs_reclaim);
*** DEADLOCK ***
7 locks held by syz-executor.1/9919:
#0: ffff88802be20420 (sb_writers#23){.+.+}-{0:0}, at: do_pwritev+0x1b2/0x260 fs/read_write.c:1072
#1: ffff888065c0f8f0 (&sb->s_type->i_mutex_key#33){++++}-{3:3}, at: inode_lock include/linux/fs.h:791 [inline]
#1: ffff888065c0f8f0 (&sb->s_type->i_mutex_key#33){++++}-{3:3}, at: btrfs_inode_lock+0xc8/0x110 fs/btrfs/inode.c:385
#2: ffff888065c0f778 (&ei->i_mmap_lock){++++}-{3:3}, at: btrfs_inode_lock+0xee/0x110 fs/btrfs/inode.c:388
#3: ffff88802be20610 (sb_internal#4){.+.+}-{0:0}, at: btrfs_sync_file+0x95b/0xe10 fs/btrfs/file.c:1952
#4: ffff8880546323f0 (btrfs_trans_num_writers){++++}-{0:0}, at: join_transaction+0x430/0xf40 fs/btrfs/transaction.c:290
#5: ffff888054632418 (btrfs_trans_num_extwriters){++++}-{0:0}, at: join_transaction+0x430/0xf40 fs/btrfs/transaction.c:290
#6: ffff88804b569358 (&ei->log_mutex){+.+.}-{3:3}, at: btrfs_log_inode+0x39c/0x4660 fs/btrfs/tree-log.c:6481
stack backtrace:
CPU: 2 PID: 9919 Comm: syz-executor.1 Not tainted 6.10.0-rc2-syzkaller-00361-g061d1af7b030 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:114
check_noncircular+0x31a/0x400 kernel/locking/lockdep.c:2187
check_prev_add kernel/locking/lockdep.c:3134 [inline]
check_prevs_add kernel/locking/lockdep.c:3253 [inline]
validate_chain kernel/locking/lockdep.c:3869 [inline]
__lock_acquire+0x2478/0x3b30 kernel/locking/lockdep.c:5137
lock_acquire kernel/locking/lockdep.c:5754 [inline]
lock_acquire+0x1b1/0x560 kernel/locking/lockdep.c:5719
__fs_reclaim_acquire mm/page_alloc.c:3801 [inline]
fs_reclaim_acquire+0x102/0x160 mm/page_alloc.c:3815
might_alloc include/linux/sched/mm.h:334 [inline]
slab_pre_alloc_hook mm/slub.c:3891 [inline]
slab_alloc_node mm/slub.c:3981 [inline]
kmem_cache_alloc_lru_noprof+0x58/0x2f0 mm/slub.c:4020
btrfs_alloc_inode+0x118/0xb20 fs/btrfs/inode.c:8411
alloc_inode+0x5d/0x230 fs/inode.c:261
iget5_locked fs/inode.c:1235 [inline]
iget5_locked+0x1c9/0x2c0 fs/inode.c:1228
btrfs_iget_locked fs/btrfs/inode.c:5590 [inline]
btrfs_iget_path fs/btrfs/inode.c:5607 [inline]
btrfs_iget+0xfb/0x230 fs/btrfs/inode.c:5636
add_conflicting_inode fs/btrfs/tree-log.c:5657 [inline]
copy_inode_items_to_log+0x1039/0x1e30 fs/btrfs/tree-log.c:5928
btrfs_log_inode+0xa48/0x4660 fs/btrfs/tree-log.c:6592
log_new_delayed_dentries fs/btrfs/tree-log.c:6363 [inline]
btrfs_log_inode+0x27dd/0x4660 fs/btrfs/tree-log.c:6718
btrfs_log_all_parents fs/btrfs/tree-log.c:6833 [inline]
btrfs_log_inode_parent+0x22ba/0x2a90 fs/btrfs/tree-log.c:7141
btrfs_log_dentry_safe+0x59/0x80 fs/btrfs/tree-log.c:7180
btrfs_sync_file+0x9c1/0xe10 fs/btrfs/file.c:1959
vfs_fsync_range+0x141/0x230 fs/sync.c:188
generic_write_sync include/linux/fs.h:2794 [inline]
btrfs_do_write_iter+0x584/0x10c0 fs/btrfs/file.c:1705
do_iter_readv_writev+0x504/0x780 fs/read_write.c:741
vfs_writev+0x36f/0xde0 fs/read_write.c:971
do_pwritev+0x1b2/0x260 fs/read_write.c:1072
__do_compat_sys_pwritev2 fs/read_write.c:1218 [inline]
__se_compat_sys_pwritev2 fs/read_write.c:1210 [inline]
__ia32_compat_sys_pwritev2+0x121/0x1b0 fs/read_write.c:1210
do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline]
__do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386
do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411
entry_SYSENTER_compat_after_hwframe+0x84/0x8e
RIP: 0023:0xf7334579
Code: b8 01 10 06 03 (...)
RSP: 002b:00000000f5f265ac EFLAGS: 00000292 ORIG_RAX: 000000000000017b
RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00000000200002c0
RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000292 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
Fix this by ensuring we are under a NOFS scope whenever we call
btrfs_iget() during inode logging and log replay.
Reported-by: syzbot+8576cfa84070dce4d59b@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/000000000000274a3a061abbd928@google.com/
Fixes: 712e36c5f2a7 ("btrfs: use GFP_KERNEL in btrfs_alloc_inode")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
It is reported that single-thread performance on some hybrid systems
dropped significantly after commit 7feec7430edd ("ACPI: CPPC: Only probe
for _CPC if CPPC v2 is acked") which prevented _CPC from being used if
the support for it had not been confirmed by the platform firmware.
The problem is that if the platform firmware does not confirm CPPC v2
support, cppc_get_perf_caps() returns an error which prevents the
intel_pstate driver from enabling ITMT. Consequently, the scheduler
does not get any hints on CPU performance differences, so in a hybrid
system some tasks may run on CPUs with lower capacity even though they
should be running on high-capacity CPUs.
To address this, modify intel_pstate to use the information from
MSR_HWP_CAPABILITIES to enable ITMT if CPPC is not available (which is
done already if the highest performance number coming from CPPC is not
realistic).
Fixes: 7feec7430edd ("ACPI: CPPC: Only probe for _CPC if CPPC v2 is acked")
Closes: https://lore.kernel.org/linux-acpi/d01b0a1f-bd33-47fe-ab41-43843d8a374f@kfocus.org
Link: https://lore.kernel.org/linux-acpi/ZnD22b3Br1ng7alf@kf-XE
Reported-by: Aaron Rainbolt <arainbolt@kfocus.org>
Tested-by: Aaron Rainbolt <arainbolt@kfocus.org>
Cc: 5.19+ <stable@vger.kernel.org> # 5.19+
Link: https://patch.msgid.link/12460110.O9o76ZdvQC@rjwysocki.net
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- fixes for ili210x and elantech drivers
- new products IDs added to xpad controller driver
- a tweak to i8042 driver to always keep keyboard in Ayaneo Kun
handheld in raw mode
- populated "id_table" in ads7846 touchscreen driver to make sure
non-OF instantiated devices can properly determine the model data.
* tag 'input-for-v6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: ads7846 - use spi_device_id table
Input: xpad - add support for ASUS ROG RAIKIRI PRO
Input: ili210x - fix ili251x_read_touch_data() return value
Input: i8042 - add Ayaneo Kun to i8042 quirk table
Input: elantech - fix touchpad state on resume for Lenovo N24
|
|
The old ftruncate() syscall, using the 32-bit off_t misses a sign
extension when called in compat mode on 64-bit architectures. As a
result, passing a negative length accidentally succeeds in truncating
to file size between 2GiB and 4GiB.
Changing the type of the compat syscall to the signed compat_off_t
changes the behavior so it instead returns -EINVAL.
The native entry point, the truncate() syscall and the corresponding
loff_t based variants are all correct already and do not suffer
from this mistake.
Fixes: 3f6d078d4acc ("fix compat truncate/ftruncate")
Reviewed-by: Christian Brauner <brauner@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Use flag saving spinlocks in the Renesas rzg2l driver. This fixes up
PREEMPT_RT problems.
- Remove broken Qualcomm PM8008 that clearly was never working. A new
version will arrive in the next merge window.
- Add a quirk for LP8764 regmap that was missed and made the TI J7200
board unusable.
- Fix persistance on the BCM2835 GPIO outputs kernel parameter so this
remains consisten across a booted kernel.
- Fix a potential deadlock in create_pinctrl()
- Fix some erroneous bitfields and pinmux reset in the Rockchip RK3328
driver.
* tag 'pinctrl-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: rockchip: fix pinmux reset in rockchip_pmx_set
pinctrl: rockchip: use dedicated pinctrl type for RK3328
pinctrl: rockchip: fix pinmux bits for RK3328 GPIO3-B pins
pinctrl: rockchip: fix pinmux bits for RK3328 GPIO2-B pins
pinctrl: fix deadlock in create_pinctrl() when handling -EPROBE_DEFER
pinctrl: bcm2835: Fix permissions of persist_gpio_outputs
pinctrl: tps6594: add missing support for LP8764 PMIC
dt-bindings: pinctrl: qcom,pmic-gpio: drop pm8008
pinctrl: qcom: spmi-gpio: drop broken pm8008 support
pinctrl: renesas: rzg2l: Use spin_{lock,unlock}_irq{save,restore}
|
|
CONFIG_SYSCTL=n
if CONFIG_SYSFS is not enabled in config, we get the below compile error,
All errors (new ones prefixed by >>):
csky-linux-ld: net/netfilter/core.o: in function `netfilter_init':
core.c:(.init.text+0x42): undefined reference to `netfilter_lwtunnel_init'
>> csky-linux-ld: core.c:(.init.text+0x56): undefined reference to `netfilter_lwtunnel_fini'
>> csky-linux-ld: core.c:(.init.text+0x70): undefined reference to `netfilter_lwtunnel_init'
csky-linux-ld: core.c:(.init.text+0x78): undefined reference to `netfilter_lwtunnel_fini'
Fixes: a2225e0250c5 ("netfilter: move the sysctl nf_hooks_lwtunnel into the netfilter core")
Reported-by: Mirsad Todorovac <mtodorovac69@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406210511.8vbByYj3-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202406210520.6HmrUaA2-lkp@intel.com/
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Commit e70b8dd26711 ("ASoC: mediatek: mt8195: Remove afe-dai component
and rework codec link") removed the codec entry for the ETDM1_OUT_BE
dai link entirely instead of replacing it with COMP_EMPTY(). This worked
by accident as the remaining COMP_EMPTY() platform entry became the codec
entry, and the platform entry became completely empty, effectively the
same as COMP_DUMMY() since snd_soc_fill_dummy_dai() doesn't do anything
for platform entries.
This causes a KASAN out-of-bounds warning in mtk_soundcard_common_probe()
in sound/soc/mediatek/common/mtk-soundcard-driver.c:
for_each_card_prelinks(card, i, dai_link) {
if (adsp_node && !strncmp(dai_link->name, "AFE_SOF", strlen("AFE_SOF")))
dai_link->platforms->of_node = adsp_node;
else if (!dai_link->platforms->name && !dai_link->platforms->of_node)
dai_link->platforms->of_node = platform_node;
}
where the code expects the platforms array to have space for at least one entry.
Add an COMP_EMPTY() entry so that dai_link->platforms has space.
Fixes: e70b8dd26711 ("ASoC: mediatek: mt8195: Remove afe-dai component and rework codec link")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20240624061257.3115467-1-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
syzkaller reports a warning in __xdp_reg_mem_model().
The warning occurs only if __mem_id_init_hash_table() returns an error. It
returns the error in two cases:
1. memory allocation fails;
2. rhashtable_init() fails when some fields of rhashtable_params
struct are not initialized properly.
The second case cannot happen since there is a static const rhashtable_params
struct with valid fields. So, warning is only triggered when there is a
problem with memory allocation.
Thus, there is no sense in using WARN() to handle this error and it can be
safely removed.
WARNING: CPU: 0 PID: 5065 at net/core/xdp.c:299 __xdp_reg_mem_model+0x2d9/0x650 net/core/xdp.c:299
CPU: 0 PID: 5065 Comm: syz-executor883 Not tainted 6.8.0-syzkaller-05271-gf99c5f563c17 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
RIP: 0010:__xdp_reg_mem_model+0x2d9/0x650 net/core/xdp.c:299
Call Trace:
xdp_reg_mem_model+0x22/0x40 net/core/xdp.c:344
xdp_test_run_setup net/bpf/test_run.c:188 [inline]
bpf_test_run_xdp_live+0x365/0x1e90 net/bpf/test_run.c:377
bpf_prog_test_run_xdp+0x813/0x11b0 net/bpf/test_run.c:1267
bpf_prog_test_run+0x33a/0x3b0 kernel/bpf/syscall.c:4240
__sys_bpf+0x48d/0x810 kernel/bpf/syscall.c:5649
__do_sys_bpf kernel/bpf/syscall.c:5738 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5736 [inline]
__x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5736
do_syscall_64+0xfb/0x240
entry_SYSCALL_64_after_hwframe+0x6d/0x75
Found by Linux Verification Center (linuxtesting.org) with syzkaller.
Fixes: 8d5d88527587 ("xdp: rhashtable with allocator ID to pointer mapping")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/all/20240617162708.492159-1-d.dulov@aladdin.ru
Link: https://lore.kernel.org/bpf/20240624080747.36858-1-d.dulov@aladdin.ru
|
|
Add few tests with may_goto and negative offset.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240619235355.85031-2-alexei.starovoitov@gmail.com
|
|
Zac's syzbot crafted a bpf prog that exposed two bugs in may_goto.
The 1st bug is the way may_goto is patched. When offset is negative
it should be patched differently.
The 2nd bug is in the verifier:
when current state may_goto_depth is equal to visited state may_goto_depth
it means there is an actual infinite loop. It's not correct to prune
exploration of the program at this point.
Note, that this check doesn't limit the program to only one may_goto insn,
since 2nd and any further may_goto will increment may_goto_depth only
in the queued state pushed for future exploration. The current state
will have may_goto_depth == 0 regardless of number of may_goto insns
and the verifier has to explore the program until bpf_exit.
Fixes: 011832b97b31 ("bpf: Introduce may_goto instruction")
Reported-by: Zac Ecob <zacecob@protonmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Closes: https://lore.kernel.org/bpf/CAADnVQL-15aNp04-cyHRn47Yv61NXfYyhopyZtUyxNojUZUXpA@mail.gmail.com/
Link: https://lore.kernel.org/bpf/20240619235355.85031-1-alexei.starovoitov@gmail.com
|
|
Add test coverage for reservations beyond the ring buffer size in order
to validate that bpf_ringbuf_reserve() rejects the request with NULL, all
other ring buffer tests keep passing as well:
# ./vmtest.sh -- ./test_progs -t ringbuf
[...]
./test_progs -t ringbuf
[ 1.165434] bpf_testmod: loading out-of-tree module taints kernel.
[ 1.165825] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel
[ 1.284001] tsc: Refined TSC clocksource calibration: 3407.982 MHz
[ 1.286871] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fc34e357, max_idle_ns: 440795379773 ns
[ 1.289555] clocksource: Switched to clocksource tsc
#274/1 ringbuf/ringbuf:OK
#274/2 ringbuf/ringbuf_n:OK
#274/3 ringbuf/ringbuf_map_key:OK
#274/4 ringbuf/ringbuf_write:OK
#274 ringbuf:OK
#275 ringbuf_multi:OK
[...]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
[ Test fixups for getting BPF CI back to work ]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240621140828.18238-2-daniel@iogearbox.net
|
|
In the attempt to clear and recreate the initial ID map for LPA2, we
wrongly use 'start - end' as the map size and make the memset() almost a
nop.
Fix it by passing the correct map size.
Fixes: 9684ec186f8f ("arm64: Enable LPA2 at boot if supported by the system")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20240621092809.162-1-yuzenghui@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Value of pdata->gpio_unbanked is taken from Device Tree. In case of broken
DT due to any error this value can be any. Without this value validation
there can be out of chips->irqs array boundaries access in
davinci_gpio_probe().
Validate the obtained nirq value so that it won't exceed the maximum
number of IRQs per bank.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: eb3744a2dd01 ("gpio: davinci: Do not assume continuous IRQ numbering")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Link: https://lore.kernel.org/r/20240618144344.16943-1-amishin@t-argos.ru
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
CI has been sporadically reporting the following issue triggered by
igt@i915_selftest@live@hangcheck on ADL-P and similar machines:
<6> [414.049203] i915: Running intel_hangcheck_live_selftests/igt_reset_evict_fence
...
<6> [414.068804] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled
<6> [414.068812] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled
<3> [414.070354] Unable to pin Y-tiled fence; err:-4
<3> [414.071282] i915_vma_revoke_fence:301 GEM_BUG_ON(!i915_active_is_idle(&fence->active))
...
<4>[ 609.603992] ------------[ cut here ]------------
<2>[ 609.603995] kernel BUG at drivers/gpu/drm/i915/gt/intel_ggtt_fencing.c:301!
<4>[ 609.604003] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
<4>[ 609.604006] CPU: 0 PID: 268 Comm: kworker/u64:3 Tainted: G U W 6.9.0-CI_DRM_14785-g1ba62f8cea9c+ #1
<4>[ 609.604008] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR4 RVP, BIOS RPLPFWI1.R00.4035.A00.2301200723 01/20/2023
<4>[ 609.604010] Workqueue: i915 __i915_gem_free_work [i915]
<4>[ 609.604149] RIP: 0010:i915_vma_revoke_fence+0x187/0x1f0 [i915]
...
<4>[ 609.604271] Call Trace:
<4>[ 609.604273] <TASK>
...
<4>[ 609.604716] __i915_vma_evict+0x2e9/0x550 [i915]
<4>[ 609.604852] __i915_vma_unbind+0x7c/0x160 [i915]
<4>[ 609.604977] force_unbind+0x24/0xa0 [i915]
<4>[ 609.605098] i915_vma_destroy+0x2f/0xa0 [i915]
<4>[ 609.605210] __i915_gem_object_pages_fini+0x51/0x2f0 [i915]
<4>[ 609.605330] __i915_gem_free_objects.isra.0+0x6a/0xc0 [i915]
<4>[ 609.605440] process_scheduled_works+0x351/0x690
...
In the past, there were similar failures reported by CI from other IGT
tests, observed on other platforms.
Before commit 63baf4f3d587 ("drm/i915/gt: Only wait for GPU activity
before unbinding a GGTT fence"), i915_vma_revoke_fence() was waiting for
idleness of vma->active via fence_update(). That commit introduced
vma->fence->active in order for the fence_update() to be able to wait
selectively on that one instead of vma->active since only idleness of
fence registers was needed. But then, another commit 0d86ee35097a
("drm/i915/gt: Make fence revocation unequivocal") replaced the call to
fence_update() in i915_vma_revoke_fence() with only fence_write(), and
also added that GEM_BUG_ON(!i915_active_is_idle(&fence->active)) in front.
No justification was provided on why we might then expect idleness of
vma->fence->active without first waiting on it.
The issue can be potentially caused by a race among revocation of fence
registers on one side and sequential execution of signal callbacks invoked
on completion of a request that was using them on the other, still
processed in parallel to revocation of those fence registers. Fix it by
waiting for idleness of vma->fence->active in i915_vma_revoke_fence().
Fixes: 0d86ee35097a ("drm/i915/gt: Make fence revocation unequivocal")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/10021
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: stable@vger.kernel.org # v5.8+
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240603195446.297690-2-janusz.krzysztofik@linux.intel.com
(cherry picked from commit 24bb052d3dd499c5956abad5f7d8e4fd07da7fb1)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Avoid spurious link status logs that may ultimately be wrong; for example,
if the link is set to down with the cable plugged, then the cable is
unplugged and after this the link is set to up, the last new log that is
appearing is incorrectly telling that the link is up.
In order to avoid errors, show link status logs after link_reset
processing, and in order to avoid spurious as much as possible, only show
the link loss when some link status change is detected.
cc: stable@vger.kernel.org
Fixes: e2ca90c276e1 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If sclp_init() fails it only partially cleans up: if there are multiple
failing calls to sclp_init() sclp_state_change_event will be added several
times to sclp_reg_list, which results in the following warning:
------------[ cut here ]------------
list_add double add: new=000003ffe1598c10, prev=000003ffe1598bf0, next=000003ffe1598c10.
WARNING: CPU: 0 PID: 1 at lib/list_debug.c:35 __list_add_valid_or_report+0xde/0xf8
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.10.0-rc3
Krnl PSW : 0404c00180000000 000003ffe0d6076a (__list_add_valid_or_report+0xe2/0xf8)
R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3
...
Call Trace:
[<000003ffe0d6076a>] __list_add_valid_or_report+0xe2/0xf8
([<000003ffe0d60766>] __list_add_valid_or_report+0xde/0xf8)
[<000003ffe0a8d37e>] sclp_init+0x40e/0x450
[<000003ffe00009f2>] do_one_initcall+0x42/0x1e0
[<000003ffe15b77a6>] do_initcalls+0x126/0x150
[<000003ffe15b7a0a>] kernel_init_freeable+0x1ba/0x1f8
[<000003ffe0d6650e>] kernel_init+0x2e/0x180
[<000003ffe000301c>] __ret_from_fork+0x3c/0x60
[<000003ffe0d759ca>] ret_from_fork+0xa/0x30
Fix this by removing sclp_state_change_event from sclp_reg_list when
sclp_init() fails.
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
KOE TX26D202VM0BWA panel spec indicates the DE signal is active high in
timing chart, so add DISPLAY_FLAGS_DE_HIGH flag in display timing flags.
This aligns display_timing with panel_desc.
Fixes: 8a07052440c2 ("drm/panel: simple: Add support for KOE TX26D202VM0BWA panel")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240624015612.341983-1-victor.liu@nxp.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624015612.341983-1-victor.liu@nxp.com
|
|
|
|
Fix unintended sign extension and klockwork issues. These are not real
issue but for sanity checks.
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This fixes a rare deadlock when we're doing an emergency shutdown due to
failure to do a journal write.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"The core gains placeholders for recently added functions when
CONFIG_I2C is not defined as well documentation fixes to start using
inclusive terminology.
The drivers get paths in DT bindings fixed as well as proper interrupt
handling for the ocores driver"
* tag 'i2c-for-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
docs: i2c: summary: be clearer with 'controller/target' and 'adapter/client' pairs
docs: i2c: summary: document 'local' and 'remote' targets
docs: i2c: summary: document use of inclusive language
docs: i2c: summary: update speed mode description
docs: i2c: summary: update I2C specification link
docs: i2c: summary: start sentences consistently.
i2c: Add nop fwnode operations
i2c: ocores: set IACK bit after core is enabled
dt-bindings: i2c: google,cros-ec-i2c-tunnel: correct path to i2c-controller schema
dt-bindings: i2c: atmel,at91sam: correct path to i2c-controller schema
|
|
Pull smb client fixes from Steve French:
"Five smb3 client fixes
- three nets/fiolios cifs fixes
- fix typo in module parameters description
- fix incorrect swap warning"
* tag '6.10-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Move the 'pid' from the subreq to the req
cifs: Only pick a channel once per read request
cifs: Defer read completion
cifs: fix typo in module parameter enable_gcm_256
cifs: drop the incorrect assertion in cifs_swap_rw()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"Fix fragility in checks for unset node ID.
Use numa_valid_node() function to verify that nid is a valid node
ID instead of inconsistent comparisons with either NUMA_NO_NODE or
MAX_NUMNODES"
* tag 'fixes-2024-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: use numa_valid_node() helper to check for invalid node ID
|
