summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-08-28r8169: Add software counter for multicast packagesCorinna Vinschen
The multicast hardware counter on 8168/8111 chips is only 32 bit while the statistics in struct rtnl_link_stats64 are 64 bit. Given that statistics are requested on an irregular basis, an overflow of the hardware counter can go unnoticed. To count even very large numbers of multicast packets reliably, add a software counter and remove previously applied code to fill the multicast field requested by @rtl8169_get_stats64 with the values read from the rx_multicast hardware counter. Signed-off-by: Corinna Vinschen <vinschen@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28scsi_dh: return SCSI_DH_NOTCONN in scsi_dh_activate()Hannes Reinecke
When calling scsi_dh_activate() we should be returning SCSI_DH_NOTCONN if the device handler couldn't be attached. Reviewed-by: Bart van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-28scsi_dh: don't allow to detach device handlers at runtimeChristoph Hellwig
The I/O submission and completion paths call into the device handler without any synchronization agains detachment. So disallow detaching device handlers at runtime. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-28scsi_dh: add a common helper to get a scsi_device from a request_queueChristoph Hellwig
And cleanup the various messy opencoded versions of this. Note that this moves the sdev_state checks outside the queue_lock coverage, but as we don't hold the lock over the activation they are only advisory anyway. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-28scsi_dh: kill struct scsi_dh_dataChristoph Hellwig
Add a ->handler and a ->handler_data field to struct scsi_device and kill this indirection. Also move struct scsi_device_handler to scsi_dh.h so that changes to it don't require rebuilding every SCSI LLDD. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-28scsi_dh: move device matching to the core codeChristoph Hellwig
Add a single list of devices that need non-ALUA device handlers to the core scsi_dh code so that we can autoload the modules for them at probe time. While this is a little ugly in terms of architecture it actually significantly simplifies the code in addition to the new autoloading functionality. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-28scsi_dh: integrate into the core SCSI codeChristoph Hellwig
Stop building scsi_dh as a separate module and integrate it fully into the core SCSI code with explicit callouts at bus scan time. For now the callouts are placed at the same point as the old bus notifiers were called, but in the future we will be able to look at ALUA INQUIRY data earlier on. Note that this also means that the device handler modules need to be loaded by the time we scan the bus. The next patches will add support for autoloading device handlers at bus scan time to make sure they are always loaded if they are enabled in the kernel config. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-28scsi_dh: move to drivers/scsiChristoph Hellwig
Prepare for building scsi_dh.c into the core SCSI module by moving it to drivers/scsi. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-28dm-mpath, scsi_dh: request scsi_dh modules in scsi_dh, not dm-mpathChristoph Hellwig
This way we can reused the same code any attachment method, not just those requested from dm-mpath. [jejb: fixup checkpatch error] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-28dm-mpath, scsi_dh: don't let dm detach device handlersChristoph Hellwig
While allowing dm-mpath to attach device handlers is a functionality we need for backwards compatibility reason there is no reason to reference count them and detach them if dm-mpath stops using the device for some reason. If the device handler works for the given device it can just stay attached, and we can take the retain_hw_handler codepath. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Hannes Reinecke <hare@Suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-28aic94xx: Skip reading user settings if flash is not foundHannes Reinecke
If no user settings are found it's pointless trying to read them from flash. So skip that step. This also fixes a compilation warning about uninitialized variables in aic94xx. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-28ipr: Enable SIS pipe commands for SIS-32 devices.Gabriel Krisman Bertazi
Remove unnecessary check that disabled SIS pipe commands for SIS-32 devices. This change was sufficient to enable raw mode and send SIS pipe commands for a 57B3 device. Fixes: f8ee25d7d239 ("ipr: AF DASD raw mode implementation in ipr driver") Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Reviewed-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-28ipr: Inhibit underlength data check for AFDASD in raw mode.Gabriel Krisman Bertazi
Disable underlength error verification based on count of bytes actually transferred for AF DASD devices when SIS pipe mode is enabled. This avoids unexpected underlength errors when issuing some commands in raw mode. Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Reviewed-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-28Bluetooth: hci_bcm: Fix crash on suspendFrederic Danis
If bcm_suspend is called whithout device opened there is a crash as it tries to use bdev->hu which is NULL. Rename bcm_device_list_lock to bcm_device_lock as it does not only apply to bcm_device_list. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-28drm/amdgpu: use IB for fill_buffer instead of direct commandChunming Zhou
Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Christian K?nig <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2015-08-28drm/amdgpu: stop trying to suspend UVD sessions v2Christian König
Saving the current UVD state on suspend and restoring it on resume just doesn't work reliable. Just close cleanup all sessions on suspend. Ported from radeon commit "12e49feadff6d7b7ebbe852b36943a71524d8d34". v2: rebased Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
2015-08-28drm/amdgpu: add scheduler dependency callback v2Christian König
This way the scheduler doesn't wait in it's work thread any more. v2: fix race conditions Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
2015-08-28drm/amdgpu: let the scheduler work more with jobs v2Christian König
v2: fix another race condition Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
2015-08-28drm/radeon: fix HDMI quantization_range for pre-DCE5 asicsAlex Deucher
Support for output_csc is only available on DCE5 and newer so don't mess with the HDMI quantization_range on pre-DCE5 asics. bug: https://bugs.freedesktop.org/show_bug.cgi?id=83226 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-08-28netfilter: reduce sparse warningsFlorian Westphal
bridge/netfilter/ebtables.c:290:26: warning: incorrect type in assignment (different modifiers) -> remove __pure annotation. ipv6/netfilter/ip6t_SYNPROXY.c:240:27: warning: cast from restricted __be16 -> switch ntohs to htons and vice versa. netfilter/core.c:391:30: warning: symbol 'nfq_ct_nat_hook' was not declared. Should it be static? -> delete it, got removed net/netfilter/nf_synproxy_core.c:221:48: warning: cast to restricted __be32 -> Use __be32 instead of u32. Tested with objdiff that these changes do not affect generated code. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-08-28Revert "netfilter: xtables: compute exact size needed for jumpstack"Florian Westphal
This reverts commit 98d1bd802cdbc8f56868fae51edec13e86b59515. mark_source_chains will not re-visit chains, so *filter :INPUT ACCEPT [365:25776] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [217:45832] :t1 - [0:0] :t2 - [0:0] :t3 - [0:0] :t4 - [0:0] -A t1 -i lo -j t2 -A t2 -i lo -j t3 -A t3 -i lo -j t4 # -A INPUT -j t4 # -A INPUT -j t3 # -A INPUT -j t2 -A INPUT -j t1 COMMIT Will compute a chain depth of 2 if the comments are removed. Revert back to counting the number of chains for the time being. Reported-by: Cong Wang <cwang@twopensource.com> Reported-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-08-28Bluetooth: Fix SCO link type handling on connection completeKuba Pawlak
Synchronous connections are initially created with type eSCO. Link manager may reject proposed link parameters, which triggers connection setup retry with a different set. Link type embedded in responses should be disregarded until Synchronous Connect Complete returns Success (0x00). Current code updates link type every time which creates an issue when link type changes to SCO and back to eSCO on further attepts. Issue happens with BlackBerry 9100 and 9700 with Intel WilkinsPeak on third connection setup attept 2015-05-18 01:27:57.332242 < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17 handle 256 voice setting 0x0060 ptype 0x0380 2015-05-18 01:27:57.333604 > HCI Event: Command Status (0x0f) plen 4 Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1 2015-05-18 01:27:57.334614 > HCI Event: Synchronous Connect Complete (0x2c) plen 17 status 0x1a handle 0 bdaddr 30:7C:30:B3:A8:86 type SCO Error: Unsupported Remote Feature / Unsupported LMP Feature 2015-05-18 01:27:57.334895 < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17 handle 256 voice setting 0x0060 ptype 0x0380 2015-05-18 01:27:57.335601 > HCI Event: Command Status (0x0f) plen 4 Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1 2015-05-18 01:27:57.336610 > HCI Event: Synchronous Connect Complete (0x2c) plen 17 status 0x1a handle 0 bdaddr 30:7C:30:B3:A8:86 type SCO Error: Unsupported Remote Feature / Unsupported LMP Feature 2015-05-18 01:27:57.336685 < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17 handle 256 voice setting 0x0060 ptype 0x03c8 2015-05-18 01:27:57.337603 > HCI Event: Command Status (0x0f) plen 4 Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1 2015-05-18 01:27:57.342608 > HCI Event: Max Slots Change (0x1b) plen 3 handle 256 slots 1 2015-05-18 01:27:57.377631 > HCI Event: Synchronous Connect Complete (0x2c) plen 17 status 0x00 handle 257 bdaddr 30:7C:30:B3:A8:86 type eSCO Air mode: CVSD Signed-off-by: Kuba Pawlak <kubax.t.pawlak@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-28Merge branch 'for-4.2-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixlet from Tejun Heo: "Simple blacklist entry addition" * 'for-4.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: Add factory recertified Crucial M500s to blacklist
2015-08-28Bluetooth: hci_intel: Add support for platform driverLoic Poulain
A platform device can be used to provide some specific resources in order to manage the controller. In this first patch we retrieve the reset gpio which is used to power on/off the controller. The main issue is to match the current tty with the correct pdev. In case of ACPI, we can easily find the right tty/pdev pair because they are both child of the same UART port. If controller is powered-on from the driver, we need to wait for a HCI boot event before being able to send any command. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-28Bluetooth: btintel: Add MODULE_FIRMWARE entries for iBT 3.0 controllersMarcel Holtmann
The iBT 3.0 controllers need intel/ibt-11-5.sfi and intel/ibt-11-5.ddc firmware files from linux-firmware repository. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-08-28Bluetooth: btusb: Correct typos based on checkpatch.plMinjune Kim
Signed-off-by: Minjune Kim <infinite.minjune.kim@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-28Bluetooth: hci_intel: Add Intel baudrate configuration supportLoic Poulain
Implement the set_baudrate callback for hci_intel. - Controller requires a read Intel version command before updating its baudrate. - The operation consists in an async cmd since the controller does not respond at the same speed. - Wait 100ms to let the controller change its baudrate. - Clear RTS until we change our own UART speed Manage speed change in the setup function, we need to restore the oper speed once chip has booted on patched firmware. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-28Bluetooth: hci_uart: Fix zero len data packet reception issueLoic Poulain
Packets with a variable length value equal to zero were not received. Since no more data expected (and input buffer entirely consumed), we need to complete/forward the packet immediately instead of waiting for more data. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-28nl802154: stricter input checking for boolean inputsStefan Schmidt
So far we handled boolean input by forcing them with !! and assigning them into a bool. This allowed userspace to send values > 1 which were used as 1. We should be stricter here and return -EINVAL for all but 0 or 1. Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-28Bluetooth: Make the function sco_conn_del have a return type of voidNicholas Krause
This makes the function sco_conn_del have a return type of void now due to this function always running successfully and thus never needing to signal its caller when a non recoverable internal failure occurs by returning a error code to its respective caller. Signed-off-by: Nicholas Krause <xerofoify@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-28Bluetooth: btmrvl: change device pointer passed to dev_coredumpvShengzhen Li
This change ensures we will get driver name as 'btmrvl_sdio' in udev event. Signed-off-by: Shengzhen Li <szli@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-28HID: wacom: wacom_setup_numbered_buttons is local to wacom_wacJiri Kosina
wacom_setup_numbered_buttons() is not used outside of wacom_wac.c, make it static. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-08-28HID: wacom: Add support for Express Key Remote.Aaron Skomra
This device is pad (buttons) only, there is no stylus or touch. Up to five remotes can pair with the device's associated USB dongle. Signed-off-by: Aaron Skomra <aaron.skomra@wacom.com> Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-08-28HID: wacom: Set button bits based on a new numbered_buttonsAaron Skomra
Prior to this commit, numbered button bit setting was done separately for each device type in wacom_setup_pad_capabilities(). Here we add a numbered_buttons property to the wacom_features struct and extract the repeated bit setting code to a new function: wacom_settup_numbered_buttons(). Signed-off-by: Aaron Skomra <aaron.skomra@wacom.com> Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-08-28Merge tag 'sound-fix-4.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Here are stable fixes that have been gathered since rc8: fixes for HD-audio widget power control regressions since 4.1, a NULL fix for HD-audio HDMI, a noise fix for Conexant codecs and a quirk addition for USB-Audio DSD" * tag 'sound-fix-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Fix path power activation ALSA: hda - Check all inputs for is_active_nid_for_any() ALSA: hda: fix possible NULL dereference ALSA: hda - Shutdown CX20722 on reboot/free to avoid spurious noises ALSA: usb: Add native DSD support for Gustard DAC-X20U
2015-08-28acer-wmi: No rfkill on HP Omen 15 wifiMichael Powell
Prevents acer-wmi from blocking wifi on HP Omen 15 laptops Signed-off-by: Michael Powell <michael_powell@mentor.com> [david.ward@ll.mit.edu: Resubmitted clean patch] Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2015-08-28ASoC: Clean up docbook warningsJonathan Corbet
A number of functions and structures in the sound subsystem had incomplete and/or obsolete DocBook comments, leading to warnings when the docs were built. Correct those comments so that we can enjoy our audio in the absence of warning noise. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-28perf evlist: Add backpointer for perf_env to evlistKan Liang
Add backpointer to perf_env in evlist, so we can easily access env when processing something where we have a evsel or evlist. Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Kan Liang <kan.liang@intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1440755289-30939-5-git-send-email-kan.liang@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-28perf tools: Rename perf_session_env to perf_envKan Liang
As it is not necessarily tied to a perf.data file and needs using in places where a perf_session is not required. Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Kan Liang <kan.liang@intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1440755289-30939-4-git-send-email-kan.liang@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-28perf tools: Do not change lib/api/fs/debugfs directlyJiri Olsa
The tracing_events_path is the variable we want to change via --debugfs-dir option, not the debugfs_mountpoint. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk> Cc: Raphael Beamonte <raphael.beamonte@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1440596813-12844-4-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-28perf tools: Add tracing_path and remove unneeded functionsJiri Olsa
There's no need for find_tracing_dir, because perf already searches for debugfs/tracefs mount on start and populate tracing_events_path. Adding tracing_path to carry tracing dir string to be used in get_tracing_file instead of calling find_tracing_dir. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Raphael Beamonte <raphael.beamonte@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1440596813-12844-3-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-28perf buildid: Introduce sysfs/filename__sprintf_build_idMasami Hiramatsu
Introduce sysfs/filename__sprintf_build_id for consolidating similar code. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20150815114259.13642.34685.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-28perf evsel: Add a backpointer to the evlist a evsel is inArnaldo Carvalho de Melo
So that functions that deal primarily with an evsel to access information that concerns the whole evlist it is in. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1440677263-21954-5-git-send-email-kan.liang@intel.com Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-28perf trace: Add header with copyright and background infoArnaldo Carvalho de Melo
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-5yqtfs728r1j1u8zmg8ufxwm@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-28perf scripts python: Add new compaction-times scriptTony Jones
This patch creates a new script (compaction-times) to report time spent in mm compaction. It is possible to report times in nanoseconds (default) or microseconds (-u). The option -p will break down results by process id, -pv will further decompose by each compaction entry/exit. For each compaction entry/exit what is reported is controlled by the options: -t report only timing -m report migration stats -ms report migration scanner stats -fs report free scanner stats The default is to report all. Entries may be further filtered by pid, pid-range or comm (regex). The script is useful when analysing workloads that compact memory. The most common example will be THP allocations on systems with a lot of uptime that has fragmented memory. This is an example of using the script to analyse a thpscale from mmtests which deliberately fragments memory and allocates THP in 4 separate threads # Recording step, one of the following; $ perf record -e 'compaction:mm_compaction_*' ./workload # or: $ perf script record compaction-times # Reporting: basic total: 2444505743ns migration: moved=357738 failed=39275 free_scanner: scanned=2705578 isolated=387875 migration_scanner: scanned=414426 isolated=397013 # Reporting: Per task stall times $ perf script report compaction-times -- -t -p total: 2444505743ns 6384[thpscale]: 740800017ns 6385[thpscale]: 274119512ns 6386[thpscale]: 832961337ns 6383[thpscale]: 596624877ns # Reporting: Per-compaction attempts for task 6385 $ perf script report compaction-times -- -m -pv 6385 total: 274119512ns migration: moved=14893 failed=24285 6385[thpscale]: 274119512ns migration: moved=14893 failed=24285 6385[thpscale].1: 3033277ns migration: moved=511 failed=1 6385[thpscale].2: 9592094ns migration: moved=1524 failed=12 6385[thpscale].3: 2495587ns migration: moved=512 failed=0 6385[thpscale].4: 2561766ns migration: moved=512 failed=0 6385[thpscale].5: 2523521ns migration: moved=512 failed=0 ..... output continues ... Changes since v1: - report stats for isolate_migratepages and isolate_freepages (Vlastimil Babka) - refactor code to achieve above - add help text - output to stdout/stderr explicitly Signed-off-by: Tony Jones <tonyj@suse.com> Cc: Mel Gorman <mgorman@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Link: http://lkml.kernel.org/r/1439840932-8933-1-git-send-email-tonyj@suse.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-28thinkpad_acpi: Remove side effects from vdbg_printk -> no_printk macroJoe Perches
vdbg_printk when not using CONFIG_THINKPAD_ACPI_DEBUG uses no_printk which produces no logging output but always evaluates arguments. Change the macro to surround the no_printk call with do { if (0) no_printk(...); } while (0) to avoid the unnecessary argument evaluations. $ size drivers/platform/x86/thinkpad_acpi.o* text data bss dec hex filename 60918 6184 824 67926 10956 drivers/platform/x86/thinkpad_acpi.o.new 60927 6184 824 67935 1095f drivers/platform/x86/thinkpad_acpi.o.old Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2015-08-28regulator: core: use debug level print in regulator_check_drmsArchit Taneja
When calling regulator_set_load, regulator_check_drms prints and returns an error if the regulator device's flag REGULATOR_CHANGE_DRMS isn't set. drms_uA_update, however, bails out without reporting an error. Replace the error print with a debug level print so that we don't get such prints when the underlying regulator doesn't support DRMS. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-28drm/i915: set CDCLK if DPLL0 enabled during resuming from S3Gary Wang
Since BIOS RC 1.4 it would enable CDCLK PLL during BIOS S3 resume, then driver needs to set CDCLK to avoid display corruption if DPLL0 enabled. References: https://bugs.freedesktop.org/show_bug.cgi?id=91697 Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Cooper Chiou <cooper.chiou@intel.com> Reviewed-by: Wei Shun Chang <wei.shun.chang@intel.com> Tested-by: Gary Wang <gary.c.wang@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Gavin Hindman <gavin.hindman@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Xiong Y Zhang <xiong.y.zhang@intel.com> Signed-off-by: Gary Wang <gary.c.wang@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-08-28spi: Add DT bindings documentation for Netlogic XLP SPI controllerKamlakant Patel
Add DT bindings documentation for SPI controller driver used by Netlogic XLP MIPS64 SoCs. Signed-off-by: Kamlakant Patel <kamlakant.patel@broadcom.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-28spi/xlp: SPI controller driver for Netlogic XLP SoCsKamlakant Patel
Add SPI Master controller driver for the SPI interface on XLP8XX, XLP3XX, XLP2XX, XLP9XX and XLP5XX family of Netlogic XLP MIPS64 processors. Signed-off-by: Kamlakant Patel <kamlakant.patel@broadcom.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-20 16:20:48 +0000