summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-09-27ARM: qcom: msm8226: Add rpm-master-stats nodeMatti Lehtimäki
Add rpm-master-stats node for MSM8226 and the required RPM MSG RAM slices for memory access. Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com> Reviewed-by: Luca Weiss <luca@z3ntu.xyz> Link: https://lore.kernel.org/r/20230922003533.107835-2-matti.lehtimaki@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-27ARM: dts: qcom: apq8026-samsung-matisse-wifi: Fix inverted hall sensorMatti Lehtimäki
Fix hall sensor GPIO polarity and also allow disabling the sensor. Remove unneeded interrupt. Fixes: f15623bda1dc ("ARM: dts: qcom: Add support for Samsung Galaxy Tab 4 10.1 (SM-T530)") Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com> Reviewed-by: Luca Weiss <luca@z3ntu.xyz> Link: https://lore.kernel.org/r/20230922011211.115234-1-matti.lehtimaki@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-27arm64: dts: qcom: apq8016-sbc: Add missing ADV7533 regulatorsStephan Gerhold
Add the missing regulator supplies to the ADV7533 HDMI bridge to fix the following dtbs_check warnings. They are all also supplied by pm8916_l6 so there is no functional difference. apq8016-sbc.dtb: bridge@39: 'dvdd-supply' is a required property apq8016-sbc.dtb: bridge@39: 'pvdd-supply' is a required property apq8016-sbc.dtb: bridge@39: 'a2vdd-supply' is a required property from schema display/bridge/adi,adv7533.yaml Fixes: 28546b095511 ("arm64: dts: apq8016-sbc: Add HDMI display support") Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230922-db410c-adv7533-regulators-v1-1-68aba71e529b@gerhold.net Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-26ARM: dts: omap: omap4-embt2ws: Let IMU driver handle Magnetometer internallyAndreas Kemnade
Possibility to use the i2c gate is only for compatibility reasons, so avoid messing around with additional i2c busses. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Message-ID: <20230924222718.2038849-1-andreas@kemnade.info> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-09-26ARM: dts: am335x-pocketbeagle: add missing GPIO muxTrevor Woerner
Add the default MODE setting of a GPIO pin that was missing from the device tree (i.e. P2.20/gpio2_00). This is to ensure the GPIO pins match the pocketbeagle wiring expectations. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Message-ID: <20230822143051.7640-5-twoerner@gmail.com> [tony@atomide.com: leave out extra line break] Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-09-26ARM: dts: am335x-pocketbeagle: enable pruTrevor Woerner
Now that the PRU code is upstream and can be loaded via remoteproc, adjust the device tree to enable it and adjust the pin muxing so that the default setting of the pins matches what's is given on the silkscreen and/or pocketbeagle wiring. Caveat: In most cases, the silkscreen will indicate, for example, "PRU0.7", but it doesn't indicate whether that pin should be enabled for input or output. On the PRU a different MODE is used for input versus output. So it is unclear which mode to enable (MODE5 = output, MODE6 = input). In cases where there is a choice (PRU1.11, PRU0.7, PRU0.4, PRU0.1, PRU1.10, PRU0.6, PRU0.3, PRU0.2, and PRU0.5) output is assumed (MODE5). The remaining PRU silkscreen pins do not have a choice and are set as follows: PRU0.16 MODE5 input PRU0.15i MODE6 input Signed-off-by: Trevor Woerner <twoerner@gmail.com> Message-ID: <20230822143051.7640-4-twoerner@gmail.com> [tony@atomide.com: formatted description to fit 75 characters] Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-09-26ARM: dts: am335x-pocketbeagle: remove dependency cycleTrevor Woerner
Remove the self-referenceing "pinctrl-0" entry inside the pinmux clause. This eliminates the set of boot messages (one for each referenced pin) similar to the following: platform 44e10800.pinmux: Fixed dependency cycle(s) with /ocp/interconnect@44c00000/segment@200000/target-module@10000/scm@0/pinmux@800/pinmux_P2_17_gpio Signed-off-by: Trevor Woerner <twoerner@gmail.com> Message-ID: <20230822143051.7640-3-twoerner@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-09-26ARM: dts: am335x-pocketbeagle: update LED informationTrevor Woerner
Add the "color" and "description" properties. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Message-ID: <20230822143051.7640-2-twoerner@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-09-26ARM: dts: omap4: embt2ws: add LEDAndreas Kemnade
Add LED since the driver is now available. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Message-ID: <20230819143109.471615-1-andreas@kemnade.info> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-09-25ARM: dts: st: href-tvk1281618: correct touchscreen syna,nosleep-modeKrzysztof Kozlowski
There is no syna,nosleep property in Synaptics RMI4 touchscreen: ste-hrefprev60-tvk.dtb: synaptics@4b: rmi4-f01@1: 'syna,nosleep' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Message-ID: <20230720115524.137944-2-krzysztof.kozlowski@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-09-25ARM: dts: st: href-tvk1281618: fix touchscreen VIO supplyKrzysztof Kozlowski
According to bindings and Linux driver, there is no VDDIO but VIO supply: ste-hrefprev60-tvk.dtb: synaptics@4b: Unevaluated properties are not allowed ('vddio-supply' was unexpected) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Message-ID: <20230720115524.137944-1-krzysztof.kozlowski@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-09-25arm64: dts: renesas: ulcb/kf: Use multi Component soundKuninori Morimoto
+-- ULCB -------------------+ |+--------+ +--------+| || SSI0| <---> |ak4613 || || SSI1| <---> | || || | +--------+| || | +--------+| || SSI2| <---> |HDMI || || | +--------+| || SSI3| <--+ | || SSI4| <-+| | |+--------+ || | +-------------||------------+ +-- Kingfisher -------------+ | || +--------+| | |+->|pcm3168a|| | +-->| || | +--------+| +---------------------------+ On UCLB/KF, we intuitively think we want to handle these as "2 Sound Cards": card0,0: 1st sound of ULCB (SSI0 - ak4613) card0,1: 2nd sound of ULCB (SSI2 - HDMI) card1,0: 1st sound of KF (SSI3 - pcm3168a) ^ ^ However, because of ASoC Component vs. Card framework limitations, we needed to handle this as "1 big Sound Card": card0,0: 1st sound of ULCB/KF (SSI0 - ak4613) card0,1: 2nd sound of ULCB/KF (SSI2 - HDMI) card0,2: 3rd sound of ULCB/KF (SSI3 - pcm3168a) ^ ^ Now ASoC supports multi Component, which allows us to handle "2 Sound Cards" such as "ULCB Sound Card" and "Kingfisher Sound Card", all ULCB/KF Audio dtsi can be updated. Note that this changes the Sound Card specification method from userland, especially for Kingfisher Sound. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/87fs382yhk.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-09-25ARM: dts: renesas: rskrza1: Add FLASH nodesGeert Uytterhoeven
Add device nodes for the dual Spansion S25FL512S QSPI NOR FLASH and the Spansion S29GL512S CFI NOR FLASH on the RSK+RZA1 development board. The former is mapped directly through the SPI Multi I/O Bus Controller. The latter resides in the external address space of the Bus State Controller (BSC). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/17a221699da14639e72264ffa39d47592d470f9a.1693481518.git.geert+renesas@glider.be
2023-09-25ARM: dts: renesas: genmai: Add FLASH nodesGeert Uytterhoeven
Add device nodes for the dual Spansion S25FL512S QSPI NOR FLASH and the two Spansion S29GL512S CFI NOR FLASHes on the Genmai development board. The former is mapped directly through the SPI Multi I/O Bus Controller. The latter reside in the address space of the Bus State Controller (BSC). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/53c89c70c6b010702fd9ab5247e19986857671ba.1693481518.git.geert+renesas@glider.be
2023-09-25ARM: dts: renesas: wheat: Move Ethernet node to LBSCGeert Uytterhoeven
The SMSC LAN89218AQ Ethernet controller on the Wheat development board resides in the external address space of the Local Bus State Controller (LBSC). Move the Ethernet device node to reflect this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/a291c2750144df29e69824d5b9d76cbc11f613c1.1693481518.git.geert+renesas@glider.be
2023-09-25ARM: dts: renesas: blanche: Move Ethernet node to LBSCGeert Uytterhoeven
The SMSC LAN89218AQ Ethernet controller on the Blanche development board resides in the external address space of the Local Bus State Controller (LBSC). Move the Ethernet device node to reflect this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/457239047bc8b5deabf15d816043a89ab00db5ef.1693481518.git.geert+renesas@glider.be
2023-09-25ARM: dts: renesas: marzen: Move Ethernet node to LBSCGeert Uytterhoeven
The SMSC LAN89218AQ Ethernet controller on the Marzen development board resides in the external address space of the Local Bus State Controller (LBSC). Move the Ethernet device node to reflect this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/74a8ee61ed89c9ca0489156a4f135ecb825e56b9.1693481518.git.geert+renesas@glider.be
2023-09-25ARM: dts: renesas: r8a7792: Add LBSC nodeGeert Uytterhoeven
Add a minimal device node for the Local Bus State Controller (LBSC) on the R-Car V2H SoC, to be extended by board DTS files for devices residing in the LBSC external address space. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/182fce2257679f6a8963ecb77aae68af617556d1.1693481518.git.geert+renesas@glider.be
2023-09-25ARM: dts: renesas: r8a7779: Add LBSC nodeGeert Uytterhoeven
Add a minimal device node for the Local Bus State Controller (LBSC) on the R-Car H1 SoC, to be extended by board DTS files for devices residing in the LBSC external address space. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/2d0a6054306b4975355e65fe012f860ec00fcf55.1693481518.git.geert+renesas@glider.be
2023-09-25ARM: dts: renesas: r7s72100: Add BSC nodeGeert Uytterhoeven
Add a minimal device node for the Bus State Controller (BSC) on the RZ/A1H SoC, to be extended by board DTS files for devices residing in the BSC external address space. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/ccab4fa198225edcd3750f62532a1ee3c6d2a109.1693481518.git.geert+renesas@glider.be
2023-09-25ARM: dts: renesas: Remove unused LBSC nodes from board DTSGeert Uytterhoeven
Several board DTS files contain minimal device nodes that represent on-SoC Local Bus State Controllers (LBSC), although they belong in the SoC-specific DTS files instead. As these device nodes are incomplete and unused, and hamper adding proper nodes later, it is better to just remove them. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/76ece7602045670cbb8dff684c3366ba6eb89add.1693481518.git.geert+renesas@glider.be
2023-09-25arm64: dts: imx93: Add the TMU interruptFabio Estevam
The Thermal Monitoring Unit (TMU) interrupt is number 83. Describe it in the devicetree to fix the following schema warning: imx93-11x11-evk.dtb: tmu@44482000: 'oneOf' conditional failed, one must be fixed: 'interrupts' is a required property 'interrupts-extended' is a required property from schema $id: http://devicetree.org/schemas/thermal/qoriq-thermal.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8dxl-ss-adma: Fix i2c compatible entriesFabio Estevam
Per i2c-imx-lpi2c.yaml, the imx8dxl lpi2c compatible should be: compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c"; Change it accordingly to fix the following schema warning: imx8dxl-evk.dtb: i2c@5a800000: compatible: 'oneOf' conditional failed, one must be fixed: ['fsl,imx8dxl-lpi2c', 'fsl,imx8qxp-lpi2c', 'fsl,imx7ulp-lpi2c'] is too long 'fsl,imx8dxl-lpi2c' is not one of ['fsl,imx7ulp-lpi2c'] 'fsl,imx7ulp-lpi2c' was expected from schema $id: http://devicetree.org/schemas/i2c/i2c-imx-lpi2c.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8x-colibri-iris-v2: Fix pinctrl node namesFabio Estevam
Per fsl,scu-pinctrl.yaml, the pinctrl node names should end with 'grp'. Change them to fix the following schema warning: imx8qxp-colibri-iris-v2.dtb: pinctrl: 'enable_3v3_vmmc', 'lcd-lvds' do not match any of the regexes: 'grp$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/pinctrl/fsl,scu-pinctrl.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8dxl-ss-conn: Complete the FEC compatiblesFabio Estevam
Use the full compatible list for the imx8dl FEC as per fsl,fec.yaml. This fixes the following schema warning: imx8dxl-evk.dtb: ethernet@5b040000: compatible: 'oneOf' conditional failed, one must be fixed: ['fsl,imx8qm-fec'] is too short 'fsl,imx8qm-fec' is not one of ['fsl,imx25-fec', 'fsl,imx27-fec', 'fsl,imx28-fec', 'fsl,imx6q-fec', 'fsl,mvf600-fec', 'fsl,s32v234-fec'] 'fsl,imx8qm-fec' is not one of ['fsl,imx53-fec', 'fsl,imx6sl-fec'] 'fsl,imx8qm-fec' is not one of ['fsl,imx35-fec', 'fsl,imx51-fec'] 'fsl,imx8qm-fec' is not one of ['fsl,imx6ul-fec', 'fsl,imx6sx-fec'] 'fsl,imx8qm-fec' is not one of ['fsl,imx7d-fec'] 'fsl,imx8mq-fec' was expected 'fsl,imx8qm-fec' is not one of ['fsl,imx8mm-fec', 'fsl,imx8mn-fec', 'fsl,imx8mp-fec', 'fsl,imx93-fec'] 'fsl,imx8qm-fec' is not one of ['fsl,imx8dxl-fec', 'fsl,imx8qxp-fec'] 'fsl,imx8qm-fec' is not one of ['fsl,imx8ulp-fec'] from schema $id: http://devicetree.org/schemas/net/fsl,fec.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8m: Remove 'nand-on-flash-bbt' from nand controllerFabio Estevam
The 'nand-on-flash-bbt' property is a property for the NAND device, not for the GPMI nand controller. Remove it to fix the following schema warnings: imx8mm-ddr4-evk.dtb: nand-controller@33002000: Unevaluated properties are not allowed ('nand-on-flash-bbt' was unexpected) from schema $id: http://devicetree.org/schemas/mtd/gpmi-nand.yaml# imx8mn-bsh-smm-s2.dtb: nand-controller@33002000: Unevaluated properties are not allowed ('nand-on-flash-bbt' was unexpected) from schema $id: http://devicetree.org/schemas/mtd/gpmi-nand.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8mp-debix-som-a-bmb: Fix EEPROM #size-cellsFabio Estevam
The mac-address is passed as a subnode of the eeprom and its 'reg' property describe a range of addresses in the eeprom. Therefore, #size-cells should be set to 1 instead of 0. This fixes the following schema warnings: imx8mp-debix-som-a-bmb-08.dtb: eeprom@52: #size-cells:0:0: 1 was expected from schema $id: http://devicetree.org/schemas/eeprom/at24.yaml# imx8mp-debix-som-a-bmb-08.dtb: eeprom@52: mac-address@0:reg: [[0], [12]] is too long from schema $id: http://devicetree.org/schemas/eeprom/at24.yaml# imx8mp-debix-som-a-bmb-08.dtb: eeprom@52: mac-address@c:reg: [[12], [12]] is too long from schema $id: http://devicetree.org/schemas/eeprom/at24.yaml# imx8mp-debix-som-a-bmb-08.dtb: eeprom@52: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'mac-address@0', 'mac-address@c' were unexpected) from schema $id: http://devicetree.org/schemas/eeprom/at24.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8-ss-lsio: Add PWM interruptsFabio Estevam
The PWM interrupt is mandatory per imx-pwm.yaml. Add them. This also fixes the followig schema warning: imx8qm-apalis-v1.1-ixora-v1.2.dtb: pwm@5d000000: 'oneOf' conditional failed, one must be fixed: 'interrupts' is a required property 'interrupts-extended' is a required property from schema $id: http://devicetree.org/schemas/pwm/imx-pwm.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx53: Adjust the ecspi compatibleFabio Estevam
Per fsl-imx-cspi.yaml, "fsl,imx53-ecspi" should not contain addtional compatible entries. Change it accordingly to fix the following schema warning: spi@63fac000: compatible: 'oneOf' conditional failed, one must be fixed: ['fsl,imx53-ecspi', 'fsl,imx51-ecspi'] is too long Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25dt-bindings: arm: fsl: Document the missing imx23 boardsFabio Estevam
There are some imx23 based boards that are not documented. Add them to the list of supportted i.MX23 boards. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx7ulp: Fix usbphy1 compatibleFabio Estevam
Per fsl,mxs-usbphy.yaml, fsl,imx7ulp-usbphy is not compatible with fsl,imx6ul-usbphy. Remove 'fsl,imx6ul-usbphy' from the compatible string to fix the following schema warning: imx7ulp-com.dtb: usb-phy@40350000: compatible: 'oneOf' conditional failed, one must be fixed: ['fsl,imx7ulp-usbphy', 'fsl,imx6ul-usbphy'] is too long Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx6q-pistachio: Use a valid value for fsl,tx-d-calFabio Estevam
Passing 5 to fsl,tx-d-cal is not valid as per fsl,mxs-usbphy.yaml: imx6q-pistachio.dtb: usbphy@20c9000: fsl,tx-d-cal:0:0: 5 is less than the minimum of 79 from schema $id: http://devicetree.org/schemas/phy/fsl,mxs-usbphy.yaml# Pass the minimum value of 79 instead. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx6q-b650v3: Fix fsl,tx-cal-45-dn-ohmsFabio Estevam
Passing 55 to fsl,tx-cal-45-dn-ohms is not valid as per fsl,mxs-usbphy.yaml: imx6q-b650v3.dtb: usbphy@20c9000: fsl,tx-cal-45-dn-ohms:0:0: 55 is greater than the maximum of 54 from schema $id: http://devicetree.org/schemas/phy/fsl,mxs-usbphy.yaml# Pass the maximum value of 54 instead. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx28-tx28: Move phy_type to USB nodeFabio Estevam
phy_type is a property for the USB controller, not for the USB PHY. Move it to the USB controller nodes to fix the following schema warning: imx28-tx28.dtb: usbphy@8007c000: 'phy_type' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/phy/fsl,mxs-usbphy.yaml Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: mxs: Switch to #pwm-cells = <3>Fabio Estevam
mxs-pwm.yaml documents that #pwm-cells should be 3. This is correct as the last cell may indicate the PWM polarity. Convert all mxs devicetree files to using #pwm-cells = <3> for consistency. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx6q: Add Variscite MX6 Custom board supportJames Hilliard
This patch adds support for the Variscite MX6 SoM Carrier Board. This Carrier-Board has the following : - LVDS interface for the VLCD-CAP-GLD-LVDS 7" LCD 800 x 480 touch display - HDMI Connector - USB Host + USB OTG Connector - 10/100/1000 Mbps Ethernet - miniPCI-Express slot - SD Card connector - Audio Headphone/Line In jack connectors - S-ATA - On-board DMIC - RS485 Header - CAN bus header - SPI header - Camera Interfaces header - OnBoard RTC with Coin Backup battery socket - RS232 Debug Header (IDC10) - RS232 DTE Product Page : https://www.variscite.com/product/single-board-computers/var-mx6customboard The dts file based on the ones provided by Variscite on their own kernel, but adapted for mainline. Cc: Pierluigi Passaro <pierluigi.p@variscite.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: James Hilliard <james.hilliard1@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx6qdl: Add Variscite VAR-SOM-MX6 SoM supportJames Hilliard
This patch adds support for the Variscite VAR_SOM-MX6 SoM with : - i.MX6 Quad or Dual Lite SoC - 256 – 4096 MB DDR3 - 4-64 GB eMMC - 128 – 1024 MB SLC NAND - Camera Interface - HDMI+CEC interface - LVDS / DSI / Parallel RGB interfaces - Ethernet RGMII interface - On-SoM Wi-Fi/Bluetooth with WiLink wl183x SDIO Module - SD/MMC/SDIO interface - USB Host + USB OTG interface - I2C interfaces - SPI interfaces - PCI-Express 2.0 interface - on-SoM Audio Codec with HP/Line-In interfaces + DMIC interface - Digital Audio interface - S/PDIF interface Product website : https://www.variscite.com/product/system-on-module-som/cortex-a9/var-som-mx6-cpu-freescale-imx6/ Support is handled with a SoM-centric dtsi exporting the default interfaces along the default pinmuxing to be enabled by the board dts file. This file is based on the one provided by Variscite on their own kernel, but adapted for mainline. Cc: Pierluigi Passaro <pierluigi.p@variscite.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: James Hilliard <james.hilliard1@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: mxs: Fix duart clock-namesFabio Estevam
Per pl011.yaml, the first entry of clock-names should be "uartclk". Change it accordingly to fix the following schema warning: imx23-xfi3.dtb: serial@80070000: clock-names:0: 'uartclk' was expected The pl011 driver does not search for the clock name, so this change is safe and was tested on a imx28-evk board. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25dt-bindings: arm: fsl: Add VAR-SOM-MX6 SoM with Custom BoardJames Hilliard
Add support for Variscite i.MX6Q VAR-SOM-MX6 SoM with Custom Board. Cc: Pierluigi Passaro <pierluigi.p@variscite.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: James Hilliard <james.hilliard1@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx6ull/7d-colibri: Fix compatibleFabio Estevam
Fix the imx6ull/7d-colibri devicetrees as per the rules defined at fsl.yaml. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx6ull-phytec-tauri: Fix compatibleFabio Estevam
Per fsl.yaml, the order of the compatible strings are not correct for imx6ull-phytec-tauri-emmc and imx6ull-phytec-tauri-nand. Fix them accordingly. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx6ull-phytec-tauri: Remove board model and compatibleFabio Estevam
The imx6ull-phytec-tauri.dtsi file is included in two places: imx6ull-phytec-tauri-emmc.dts imx6ull-phytec-tauri-nand.dts These two files overwrite the board model and compatible locally, so there is no need for describing them in imx6ull-phytec-tauri.dtsi. Remove the board model and compatible. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx7s: Fix CSI clocksFabio Estevam
Per nxp,imx7-csi.yaml, there is only one CSI clock entry. Fix it. This fixes the following schema warnings: imx7d-zii-rpu2.dtb: csi@30710000: clocks: [[1, 413], [1, 326], [1, 413]] is too long from schema $id: http://devicetree.org/schemas/media/nxp,imx7-csi.yaml# imx7d-zii-rpu2.dtb: csi@30710000: clock-names:0: 'mclk' was expected from schema $id: http://devicetree.org/schemas/media/nxp,imx7-csi.yaml# imx7d-zii-rpu2.dtb: csi@30710000: clock-names: ['axi', 'mclk', 'dcic'] is too long from schema $id: http://devicetree.org/schemas/media/nxp,imx7-csi.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx51-zii-rdu1: Use preferred i2c-gpios propertiesFabio Estevam
The 'gpios' property to describe the SDA and SCL GPIOs is considered deprecated according to i2c-gpio.yaml. Switch to the preferred 'sda-gpios' and 'scl-gpios' properties. This fixes the following schema warnings: imx51-zii-rdu1.dtb: i2c-gpio: 'sda-gpios' is a required property from schema $id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml# imx51-zii-rdu1.dtb: i2c-gpio: 'scl-gpios' is a required property from schema $id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx6ul-tx6ul: Use preferred i2c-gpios propertiesFabio Estevam
The 'gpios' property to describe the SDA and SCL GPIOs is considered deprecated according to i2c-gpio.yaml. Switch to the preferred 'sda-gpios' and 'scl-gpios' properties. This fixes the following schema warnings: imx6ul-tx6ul-0011.dtb: i2c-gpio: 'sda-gpios' is a required property from schema $id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml# imx6ul-tx6ul-0011.dtb: i2c-gpio: 'scl-gpios' is a required property from schema $id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml# Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx: Add imx8mm-prt8mm.dtb to buildRob Herring
imx8mm-prt8mm.dts was not getting built. Add it to the build. Fixes: 58497d7a13ed ("arm64: dts: imx: add Protonic PRT8MM board") Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8mq-librem5: Remove invalid charger propertiesFabio Estevam
Per bq25890.yaml, 'phys', 'ti,use-vinmin-threshold', 'ti,vinmin-threshold' are not valid properties. Remove them to fix the following schema warning: imx8mq-librem5-r2.dtb: charger@6a: Unevaluated properties are not allowed ('phys', 'ti,use-vinmin-threshold', 'ti,vinmin-threshold' were unexpected) from schema $id: http://devicetree.org/schemas/power/supply/bq25890.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8-apalis-v1.1: Remove invalid GPIO propertiesFabio Estevam
Per fsl-imx-gpio.yaml, 'pad-wakeup' and 'pad-wakeup-num' are not valid properties/ Remove them to fix the following schema warning: imx8qm-apalis-ixora-v1.1.dtb: gpio@5d0a0000: 'pad-wakeup', 'pad-wakeup-num' do not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/gpio/fsl-imx-gpio.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8-apalis-ixora: Remove invalid ngpios propertyFabio Estevam
Per fsl-imx-gpio.yaml, 'ngpios' is not a valid property. Remove it to fix the following schema warning: imx8qm-apalis-v1.1-ixora-v1.2.dtb: gpio@5d0d0000: 'ngpios' does not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/gpio/fsl-imx-gpio.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8mq-zii-ultra: Fix mdio node nameFabio Estevam
Per mdio-gpio.yaml, the node name should be 'mdio'. Change it accordingly to fix the following schema warning: imx8mq-zii-ultra-zest.dtb: bitbang-mdio: $nodename:0: 'bitbang-mdio' does not match '^mdio(@.*)?' from schema $id: http://devicetree.org/schemas/net/mdio-gpio.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit (git 2.34.1) at 2025-10-02 05:45:36 +0000