| Age | Commit message (Collapse) | Author |
|---|
|
Add an optional timeout arg to 'rootwait' as the maximum time in
seconds to wait for the root device to show up before attempting
forced mount of the root filesystem.
Use case:
In case of device mapper usage for the rootfs (e.g. root=/dev/dm-0),
if the mapper is not able to create the virtual block for any reason
(wrong arguments, bad dm-verity signature, etc), the `rootwait` param
causes the kernel to wait forever. It may however be desirable to only
wait for a given time and then panic (force mount) to cause device reset.
This gives the bootloader a chance to detect the problem and to take some
measures, such as marking the booted partition as bad (for A/B case) or
entering a recovery mode.
In success case, mounting happens as soon as the root device is ready,
unlike the existing 'rootdelay' parameter which performs an unconditional
pause.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Message-Id: <20230813082349.513386-1-loic.poulain@linaro.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into devel
Qualcomm pinctrl changes for v6.6
1. Add support for the SM6115 and SM8350 LPASS (Low Power Audio
SubSystem) TLMM pin controllers.
2. Add bindings for the Qualcomm PMC8180 and PMC8180C PMICs GPIO pin
controllers.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
only from asm")
The build bot reports:
>> arch/arm/vfp/vfpmodule.c:324:13: error: static declaration of 'VFP_bounce' follows non-static declaration
static void VFP_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs)
^
arch/arm/include/asm/vfp.h:105:6: note: previous declaration is here
void VFP_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs);
^
1 error generated.
This is due to a merge conflict between commit ae1f8d793a19 ("ARM:
9304/1: add prototype for function called only from asm") and Ard's
commit 4708fb041346 ("ARM: vfp: Reimplement VFP exception entry in C
code").
Fix this by removing Arnd's change. No need to backport.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308150547.m54XHV12-lkp@intel.com/
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Due to lack of maintenance and stall of development for a few years now,
and since no new features will ever be added upstream, remove the
OX810 and OX820 gpio bindings.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230814-topic-oxnas-upstream-remove-v3-3-04a0c5cdda52@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Due to lack of maintenance and stall of development for a few years now,
and since no new features will ever be added upstream, remove the
OX810 and OX820 pinctrl bindings.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230814-topic-oxnas-upstream-remove-v3-2-04a0c5cdda52@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Due to lack of maintenance and stall of development for a few years now,
and since no new features will ever be added upstream, remove support
for OX810 and OX820 pinctrl & gpio.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230814-topic-oxnas-upstream-remove-v3-1-04a0c5cdda52@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
When the code to use the PTP HW clock was added, it didn't update
the Kconfig entry for the PTP dependency, leading to build errors,
so update the Kconfig entry to depend on PTP_1588_CLOCK_OPTIONAL.
aarch64-linux-ld: drivers/net/wireless/intel/iwlwifi/mvm/ptp.o: in function `iwl_mvm_ptp_init':
drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:294: undefined reference to `ptp_clock_register'
drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:294:(.text+0xce8): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ptp_clock_register'
aarch64-linux-ld: drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:301: undefined reference to `ptp_clock_index'
drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:301:(.text+0xd18): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ptp_clock_index'
aarch64-linux-ld: drivers/net/wireless/intel/iwlwifi/mvm/ptp.o: in function `iwl_mvm_ptp_remove':
drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:315: undefined reference to `ptp_clock_index'
drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:315:(.text+0xe80): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ptp_clock_index'
aarch64-linux-ld: drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:319: undefined reference to `ptp_clock_unregister'
drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:319:(.text+0xeac): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ptp_clock_unregister'
Fixes: 1595ecce1cf3 ("wifi: iwlwifi: mvm: add support for PTP HW clock (PHC)")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/all/202308110447.4QSJHmFH-lkp@intel.com/
Cc: Krishnanand Prabhu <krishnanand.prabhu@intel.com>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Gregory Greenman <gregory.greenman@intel.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230812052947.22913-1-rdunlap@infradead.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Convert Broadcom BCM281xx pin controller bindings to DT schema.
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/ZMZ3aEnrrZRDNdO+@standask-GA-A55M-S2HP
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Drops a race where 2 threads could spot a positive value and both
proceed to dec to -1, without reporting anything.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Message-Id: <20230811194814.1612336-1-mjguzik@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Fix one kernel-doc comment to silence the warning:
fs/read_write.c:88: warning: Function parameter or member 'maxsize' not described in 'generic_file_llseek_size'
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Message-Id: <20230811014359.4960-1-yang.lee@linux.alibaba.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Let's clarify from where we take idmapping of each type:
- caller
- filesystem
- mount
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Christian Brauner <brauner@kernel.org>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Message-Id: <20230625182047.26854-1-aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
For certain types of applications (for example PLC software or
RAN processing), upon occurrence of an event, it is necessary to
complete a certain task in a maximum amount of time (deadline).
One way to express this requirement is with a pair of numbers,
deadline time and execution time, where:
* deadline time: length of time between event and deadline.
* execution time: length of time it takes for processing of event
to occur on a particular hardware platform
(uninterrupted).
The particular values depend on use-case. For the case
where the realtime application executes in a virtualized
guest, an IPI which must be serviced in the host will cause
the following sequence of events:
1) VM-exit
2) execution of IPI (and function call)
3) VM-entry
Which causes an excess of 50us latency as observed by cyclictest
(this violates the latency requirement of vRAN application with 1ms TTI,
for example).
invalidate_bh_lrus calls an IPI on each CPU that has non empty
per-CPU cache:
on_each_cpu_cond(has_bh_in_lru, invalidate_bh_lru, NULL, 1);
The performance when using the per-CPU LRU cache is as follows:
42 ns per __find_get_block
68 ns per __find_get_block_slow
Given that the main use cases for latency sensitive applications
do not involve block I/O (data necessary for program operation is
locked in RAM), disable per-CPU buffer_head caches for isolated CPUs.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Message-Id: <ZJtBrybavtb1x45V@tpad>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
sharing
When NFS superblocks are created by automounting, their LSM parameters
aren't set in the fs_context struct prior to sget_fc() being called,
leading to failure to match existing superblocks.
This bug leads to messages like the following appearing in dmesg when
fscache is enabled:
NFS: Cache volume key already in use (nfs,4.2,2,108,106a8c0,1,,,,100000,100000,2ee,3a98,1d4c,3a98,1)
Fix this by adding a new LSM hook to load fc->security for submount
creation.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/165962680944.3334508.6610023900349142034.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/165962729225.3357250.14350728846471527137.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/165970659095.2812394.6868894171102318796.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/166133579016.3678898.6283195019480567275.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/217595.1662033775@warthog.procyon.org.uk/ # v5
Fixes: 9bc61ab18b1d ("vfs: Introduce fs_context, switch vfs_kern_mount() to it.")
Fixes: 779df6a5480f ("NFS: Ensure security label is set for root inode")
Tested-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: "Christian Brauner (Microsoft)" <brauner@kernel.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230808-master-v9-1-e0ecde888221@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Pull virtio fixes from Michael Tsirkin:
"Just a bunch of bugfixes all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (26 commits)
virtio-mem: check if the config changed before fake offlining memory
virtio-mem: keep retrying on offline_and_remove_memory() errors in Sub Block Mode (SBM)
virtio-mem: convert most offline_and_remove_memory() errors to -EBUSY
virtio-mem: remove unsafe unplug in Big Block Mode (BBM)
pds_vdpa: fix up debugfs feature bit printing
pds_vdpa: alloc irq vectors on DRIVER_OK
pds_vdpa: clean and reset vqs entries
pds_vdpa: always allow offering VIRTIO_NET_F_MAC
pds_vdpa: reset to vdpa specified mac
virtio-net: Zero max_tx_vq field for VIRTIO_NET_CTRL_MQ_HASH_CONFIG case
vdpa/mlx5: Fix crash on shutdown for when no ndev exists
vdpa/mlx5: Delete control vq iotlb in destroy_mr only when necessary
vdpa/mlx5: Fix mr->initialized semantics
vdpa/mlx5: Correct default number of queues when MQ is on
virtio-vdpa: Fix cpumask memory leak in virtio_vdpa_find_vqs()
vduse: Use proper spinlock for IRQ injection
vdpa: Enable strict validation for netlinks ops
vdpa: Add max vqp attr to vdpa_nl_policy for nlattr length check
vdpa: Add queue index attr to vdpa_nl_policy for nlattr length check
vdpa: Add features attr to vdpa_nl_policy for nlattr length check
...
|
|
Fix warning for "cast to smaller integer type 'enum sysc_soc' from 'const
void *'".
Cc: Nishanth Menon <nm@ti.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308150723.ziuGCdM3-lkp@intel.com/
Fixes: e1e1e9bb9d94 ("bus: ti-sysc: Fix build warning for 64-bit build")
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Number of clocks supported by Linux drivers might vary - sometimes we
add new clocks, not exposed previously. Therefore these numbers of
clocks should not be in the bindings, as that prevents changing them.
Remove it entirely from the bindings, once Linux drivers stopped using
them.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20230808082738.122804-12-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Number of clocks supported by Linux drivers might vary - sometimes we
add new clocks, not exposed previously. Therefore these numbers of
clocks should not be in the bindings, as that prevents changing them.
Define number of clocks per each clock controller inside the driver
directly.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20230808082738.122804-11-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Number of clocks supported by Linux drivers might vary - sometimes we
add new clocks, not exposed previously. Therefore these numbers of
clocks should not be in the bindings, as that prevents changing them.
Define number of clocks per each clock controller inside the driver
directly.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20230808082738.122804-10-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Number of clocks supported by Linux drivers might vary - sometimes we
add new clocks, not exposed previously. Therefore these numbers of
clocks should not be in the bindings, as that prevents changing them.
Define number of clocks per each clock controller inside the driver
directly.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20230808082738.122804-9-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Number of clocks supported by Linux drivers might vary - sometimes we
add new clocks, not exposed previously. Therefore these numbers of
clocks should not be in the bindings, as that prevents changing them.
Define number of clocks per each clock controller inside the driver
directly.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20230808082738.122804-8-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Number of clocks supported by Linux drivers might vary - sometimes we
add new clocks, not exposed previously. Therefore these numbers of
clocks should not be in the bindings, as that prevents changing them.
Define number of clocks per each clock controller inside the driver
directly.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20230808082738.122804-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Number of clocks supported by Linux drivers might vary - sometimes we
add new clocks, not exposed previously. Therefore these numbers of
clocks should not be in the bindings, as that prevents changing them.
Define number of clocks per each clock controller inside the driver
directly.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20230808082738.122804-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Number of clocks supported by Linux drivers might vary - sometimes we
add new clocks, not exposed previously. Therefore these numbers of
clocks should not be in the bindings, as that prevents changing them.
Define number of clocks per each clock controller inside the driver
directly.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20230808082738.122804-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Number of clocks supported by Linux drivers might vary - sometimes we
add new clocks, not exposed previously. Therefore these numbers of
clocks should not be in the bindings, as that prevents changing them.
Define number of clocks per each clock controller inside the driver
directly.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20230808082738.122804-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Number of clocks supported by Linux drivers might vary - sometimes we
add new clocks, not exposed previously. Therefore these numbers of
clocks should not be in the bindings, as that prevents changing them.
Define number of clocks per each clock controller inside the driver
directly.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20230808082738.122804-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Number of clocks supported by Linux drivers might vary - sometimes we
add new clocks, not exposed previously. Therefore these numbers of
clocks should not be in the bindings, as that prevents changing them.
Define number of clocks per each clock controller inside the driver
directly.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20230808082738.122804-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
David Vernet says:
====================
The struct bpf_struct_ops structure in BPF is a framework that allows
subsystems to extend themselves using BPF. In commit 68b04864ca425
("bpf: Create links for BPF struct_ops maps") and commit aef56f2e918bf
("bpf: Update the struct_ops of a bpf_link"), the structure was updated
to include new ->validate() and ->update() callbacks respectively in
support of allowing struct_ops maps to be created with BPF_F_LINK.
The intention was that struct bpf_struct_ops implementations could
support map updates through the link. Because map validation and
registration would take place in two separate steps for struct_ops
maps managed by the link (the first in map update elem, and the latter
in link create), the ->validate() callback was added, and any struct_ops
implementation that wished to use BPF_F_LINK, even just for lifetime
management, would then be required to define both it and ->update().
Not all struct_ops implementations can or will support update, however.
For example, the sched_ext struct_ops implementation proposed in [0]
will not be able to support atomic map updates because it can race with
sysrq, has to cycle tasks through various states in order to safely
transition, etc. It can, however, benefit from letting the BPF link
automatically evict the struc_ops map when the application exits (e.g.
if it crashes).
This patch set therefore:
1. Updates the struct_ops implementation to support default values for
->validate() and ->update() so that struct_ops implementations can
benefit from BPF_F_LINK management even if they can't support
updates.
2. Documents struct bpf_struct_ops so that the semantics are clear and
well defined.
---
v2: https://lore.kernel.org/bpf/0f5ea3de-c6e7-490f-b5ec-b5c7cd288687@gmail.com/T/
Changes from v2 -> v3:
- Add patch 2/2 that documents the struct bpf_struct_ops structure.
- Add Kui-Feng's Acked-by tag to patch 1/2.
v1: https://lore.kernel.org/lkml/20230811150934.GA542801@maniforge/
Changes from v1 -> v2:
- Move the if (!st_map->st_ops->update) check outside of the critical
section before we acquire the update_mutex.
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Subsystems that want to implement a struct bpf_struct_ops structure to
enable struct_ops maps must currently reverse engineer how the structure
works. Given that this is meant to be a way for subsystem maintainers to
extend their subsystems using BPF, let's document it to make it a bit
easier on them.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230814185908.700553-3-void@manifault.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Currently, if a struct_ops map is loaded with BPF_F_LINK, it must also
define the .validate() and .update() callbacks in its corresponding
struct bpf_struct_ops in the kernel. Enabling struct_ops link is useful
in its own right to ensure that the map is unloaded if an application
crashes. For example, with sched_ext, we want to automatically unload
the host-wide scheduler if the application crashes. We would likely
never support updating elements of a sched_ext struct_ops map, so we'd
have to implement these callbacks showing that they _can't_ support
element updates just to benefit from the basic lifetime management of
struct_ops links.
Let's enable struct_ops maps to work with BPF_F_LINK even if they
haven't defined these callbacks, by assuming that a struct_ops map
element cannot be updated by default.
Acked-by: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230814185908.700553-2-void@manifault.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Add several new tcx test cases to improve test coverage. This also includes
a few new tests with ingress instead of clsact qdisc, to cover the fix from
commit dc644b540a2d ("tcx: Fix splat in ingress_destroy upon tcx_entry_free").
# ./test_progs -t tc
[...]
#234 tc_links_after:OK
#235 tc_links_append:OK
#236 tc_links_basic:OK
#237 tc_links_before:OK
#238 tc_links_chain_classic:OK
#239 tc_links_chain_mixed:OK
#240 tc_links_dev_cleanup:OK
#241 tc_links_dev_mixed:OK
#242 tc_links_ingress:OK
#243 tc_links_invalid:OK
#244 tc_links_prepend:OK
#245 tc_links_replace:OK
#246 tc_links_revision:OK
#247 tc_opts_after:OK
#248 tc_opts_append:OK
#249 tc_opts_basic:OK
#250 tc_opts_before:OK
#251 tc_opts_chain_classic:OK
#252 tc_opts_chain_mixed:OK
#253 tc_opts_delete_empty:OK
#254 tc_opts_demixed:OK
#255 tc_opts_detach:OK
#256 tc_opts_detach_after:OK
#257 tc_opts_detach_before:OK
#258 tc_opts_dev_cleanup:OK
#259 tc_opts_invalid:OK
#260 tc_opts_mixed:OK
#261 tc_opts_prepend:OK
#262 tc_opts_replace:OK
#263 tc_opts_revision:OK
[...]
Summary: 44/38 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/8699efc284b75ccdc51ddf7062fa2370330dc6c0.1692029283.git.daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amdgpu:
- SDMA 6.1.0 support
- SMU 13.x fixes
- PSP 13.x fixes
- HDP 6.1 support
- SMUIO 14.0 support
- IH 6.1 support
- Coding style cleanups
- Misc display fixes
- Initial Freesync panel replay support
- RAS fixes
- SDMA 5.2 MGCG updates
- SR-IOV fixes
- DCN3+ gamma fix
- Revert zpos properly until IGT regression is fixed
- NBIO 7.9 fixes
- Use TTM to manage the doorbell BAR
- Async flip fix
- DPIA tracing support
- DCN 3.x TMDS HDMI fixes
- FRU fixes
amdkfd:
- Coding style cleanups
- SVM fixes
- Trap handler fixes
- Convert older APUs to use dGPU path like newer APUs
- Drop IOMMUv2 path as it is no longer used
radeon:
- Coding style cleanups
drm buddy:
- Fix debugging output
UAPI:
- A new memory pool was added to amdgpu_drm.h since we converted doorbell BAR management to use TTM,
but userspace is blocked from allocating from it at this point, so kind of not really anything new
here per se
Signed-off-by: Dave Airlie <airlied@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQgO5Idg2tXNTSZAr293/aFa7yZ2AUCZNahZwAKCRC93/aFa7yZ
# 2KNjAP0UV2vJZjrze7OQI/YoI+40UlGjS81nKGlMIN3eR8nzvAD/c9McLJViL82R
# idEAK7tsr/MaCKoPAlED7CkUZiHNlQw=
# =4w7I
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 12 Aug 2023 07:00:23 AEST
# gpg: using EDDSA key 203B921D836B5735349902BDBDDFF6856BBC99D8
# gpg: Can't check signature: No public key
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230811211554.7804-1-alexander.deucher@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux into drm-next
Renesas R-Car DU miscellaneous changes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230814130531.GC22929@pendragon.ideasonboard.com
|
|
The failure handling procedure destroys page pools for all queues,
including those that haven't had their page pool created yet. this patch
introduces necessary adjustments to prevent potential risks and
inconsistency with the error handling behavior.
Fixes: 0ebab78cbcbf ("net: veth: add page_pool for page recycling")
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Link: https://lore.kernel.org/r/20230812023016.10553-1-liangchen.linux@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Michal Schmidt says:
====================
octeon_ep: fixes for error and remove paths
I have an Octeon card that's misconfigured in a way that exposes a
couple of bugs in the octeon_ep driver's error paths. It can reproduce
the issues that patches 1 & 4 are fixing. Patches 2 & 3 are a result of
reviewing the nearby code.
====================
Link: https://lore.kernel.org/r/20230810150114.107765-1-mschmidt@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If it fails to get the devices's MAC address, octep_probe exits while
leaving the delayed work intr_poll_task queued. When the work later
runs, it's a use after free.
Move the cancelation of intr_poll_task from octep_remove into
octep_device_cleanup. This does not change anything in the octep_remove
flow, but octep_device_cleanup is called also in the octep_probe error
path, where the cancelation is needed.
Note that the cancelation of ctrl_mbox_task has to follow
intr_poll_task's, because the ctrl_mbox_task may be queued by
intr_poll_task.
Fixes: 24d4333233b3 ("octeon_ep: poll for control messages")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Link: https://lore.kernel.org/r/20230810150114.107765-5-mschmidt@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
intr_poll_task may queue ctrl_mbox_task. The function
octep_poll_non_ioq_interrupts_cn93_pf does this.
When removing the driver and canceling these two works, cancel
ctrl_mbox_task last to guarantee it does not run anymore.
Fixes: 24d4333233b3 ("octeon_ep: poll for control messages")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Link: https://lore.kernel.org/r/20230810150114.107765-4-mschmidt@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tx_timeout_task is canceled too early when removing the driver. Nothing
prevents .ndo_tx_timeout from triggering and queuing the work again.
Better cancel it after the netdev is unregistered.
It's harmless for octep_tx_timeout_task to run in the window between the
unregistration and cancelation, because it checks netif_running.
Fixes: 862cd659a6fb ("octeon_ep: Add driver framework and device initialization")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Link: https://lore.kernel.org/r/20230810150114.107765-3-mschmidt@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The intention was to wait up to 500 ms for the mbox response.
The third argument to wait_event_interruptible_timeout() is supposed to
be the timeout duration. The driver mistakenly passed absolute time
instead.
Fixes: 577f0d1b1c5f ("octeon_ep: add separate mailbox command and response queues")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230810150114.107765-2-mschmidt@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next
Mediatek DRM Next for Linux 6.6
1. Small mtk-dpi cleanups
2. DisplayPort: support eDP and aux-bus
3. Fix uninitialized symbol
4. Do not check for 0 return after calling platform_get_irq()
5. Convert to platform remove callback returning void
6. Fix coverity issues
7. Fix potential memory leak if vmap() fail
8. Fix void-pointer-to-enum-cast warning
9. Rid W=1 warnings from GPU
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230813152726.14802-1-chunkuang.hu@kernel.org
|
|
On Zynq UltraScale+ MPSoC ubuntu platform when systemctl issues suspend,
network manager bring down the interface and goes into suspend. When it
wakes up it again enables the interface.
This leads to xilinx-psgtr "PLL lock timeout" on interface bringup, as
the power management controller power down the entire FPD (including
SERDES) if none of the FPD devices are in use and serdes is not
initialized on resume.
$ sudo rtcwake -m no -s 120 -v
$ sudo systemctl suspend <this does ifconfig eth1 down>
$ ifconfig eth1 up
xilinx-psgtr fd400000.phy: lane 0 (type 10, protocol 5): PLL lock timeout
phy phy-fd400000.phy.0: phy poweron failed --> -110
macb driver is called in this way:
1. macb_close: Stop network interface. In this function, it
reset MACB IP and disables PHY and network interface.
2. macb_suspend: It is called in kernel suspend flow. But because
network interface has been disabled(netif_running(ndev) is
false), it does nothing and returns directly;
3. System goes into suspend state. Some time later, system is
waken up by RTC wakeup device;
4. macb_resume: It does nothing because network interface has
been disabled;
5. macb_open: It is called to enable network interface again. ethernet
interface is initialized in this API but serdes which is power-off
by PMUFW during FPD-off suspend is not initialized again and so
we hit GT PLL lock issue on open.
To resolve this PLL timeout issue always do PS GTR initialization
when ethernet device is configured as non-wakeup source.
Fixes: f22bd29ba19a ("net: macb: Fix ZynqMP SGMII non-wakeup source resume failure")
Fixes: 8b73fa3ae02b ("net: macb: Added ZynqMP-specific initialization")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/1691414091-2260697-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a phylink_get_caps implementation for Marvell 88e6060 DSA switch.
This is a fast ethernet switch, with internal PHYs for ports 0 through
4. Port 4 also supports MII, REVMII, REVRMII and SNI. Port 5 supports
MII, REVMII, REVRMII and SNI without an internal PHY.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/E1qUkx7-003dMX-9b@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
Cross-subsystem Changes:
- Backmerge of drm-next
Driver Changes:
- Apply workaround 22016122933 correctly (Jonathan, Matt R)
- Simplify shmem_create_from_object map_type selection (Jonathan,
Tvrtko)
- Make i915_coherent_map_type GT-centric (Jonathan, Matt R)
- Selftest improvements (John)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZNYR3bKFquGc7u9w@jlahtine-mobl.ger.corp.intel.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-allwinner
Pull Allwinner clk driver changes from Chen-Yu Tsai:
- Parameter name correction for ccu_nkm_round_rate()
- Implement CLK_SET_RATE_PARENT for NKM clocks, i.e. consider alternative
parent rates when determining clock rates
- Set CLK_SET_RATE_PARENT for A64 pll-mipi
- Support finding closest (as opposed to closest but not higher) clock
rate for NM, NKM, mux and div type clocks, as use it for A64
pll-video0
- Prefer current parent rate if able to generate ideal clock rate for
NKM clocks
* tag 'sunxi-clk-for-6.6-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
clk: sunxi-ng: nkm: Prefer current parent rate
clk: sunxi-ng: a64: select closest rate for pll-video0
clk: sunxi-ng: div: Support finding closest rate
clk: sunxi-ng: mux: Support finding closest rate
clk: sunxi-ng: nkm: Support finding closest rate
clk: sunxi-ng: nm: Support finding closest rate
clk: sunxi-ng: Add helper function to find closest rate
clk: sunxi-ng: Add feature to find closest rate
clk: sunxi-ng: a64: allow pll-mipi to set parent's rate
clk: sunxi-ng: nkm: consider alternative parent rates when determining rate
clk: sunxi-ng: nkm: Use correct parameter name for parent HW
|
|
I've avoided doing this because there is no way to make this happen
without an intrusion into the core code. Up till now this has avoided
needing the core code's probe path with some hackery - but now that
default domains are becoming mandatory it is unavoidable.
This became a serious problem when the core code stopped allowing
partially registered iommu drivers in commit 14891af3799e ("iommu: Move
the iommu driver sysfs setup into iommu_init/deinit_device()") which
breaks the selftest. That series was developed along with a second series
that contained this patch so it was not noticed.
Make it so that iommufd selftest can create a real iommu driver and bind
it only to is own private bus. Add iommu_device_register_bus() as a core
code helper to make this possible. It simply sets the right pointers and
registers the notifier block. The mock driver then works like any normal
driver should, with probe triggered by the bus ops
When the bus->iommu_ops stuff is fully unwound we can probably do better
here and remove this special case.
Link: https://lore.kernel.org/r/15-v6-e8114faedade+425-iommu_all_defdom_jgg@nvidia.com
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
In LLVM 16, anonymous items may return names like `(unnamed union at ..)`
rather than empty names [1], which breaks Rust-enabled builds because
bindgen assumed an empty name instead of detecting them via
`clang_Cursor_isAnonymous` [2]:
$ make rustdoc LLVM=1 CLIPPY=1 -j$(nproc)
RUSTC L rust/core.o
BINDGEN rust/bindings/bindings_generated.rs
BINDGEN rust/bindings/bindings_helpers_generated.rs
BINDGEN rust/uapi/uapi_generated.rs
thread 'main' panicked at '"ftrace_branch_data_union_(anonymous_at__/_/include/linux/compiler_types_h_146_2)" is not a valid Ident', .../proc-macro2-1.0.24/src/fallback.rs:693:9
...
thread 'main' panicked at '"ftrace_branch_data_union_(anonymous_at__/_/include/linux/compiler_types_h_146_2)" is not a valid Ident', .../proc-macro2-1.0.24/src/fallback.rs:693:9
...
This was fixed in bindgen 0.62.0. Therefore, upgrade bindgen to
a more recent version, 0.65.1, to support LLVM 16.
Since bindgen 0.58.0 changed the `--{white,black}list-*` flags to
`--{allow,block}list-*` [3], update them on our side too.
In addition, bindgen 0.61.0 moved its CLI utility into a binary crate
called `bindgen-cli` [4]. Thus update the installation command in the
Quick Start guide.
Moreover, bindgen 0.61.0 changed the default functionality to bind
`size_t` to `usize` [5] and added the `--no-size_t-is-usize` flag
to not bind `size_t` as `usize`. Then bindgen 0.65.0 removed
the `--size_t-is-usize` flag [6]. Thus stop passing the flag to bindgen.
Finally, bindgen 0.61.0 added support for the `noreturn` attribute (in
its different forms) [7]. Thus remove the infinite loop in our Rust
panic handler after calling `BUG()`, since bindgen now correctly
generates a `BUG()` binding that returns `!` instead of `()`.
Link: https://github.com/llvm/llvm-project/commit/19e984ef8f49bc3ccced15621989fa9703b2cd5b [1]
Link: https://github.com/rust-lang/rust-bindgen/pull/2319 [2]
Link: https://github.com/rust-lang/rust-bindgen/pull/1990 [3]
Link: https://github.com/rust-lang/rust-bindgen/pull/2284 [4]
Link: https://github.com/rust-lang/rust-bindgen/commit/cc78b6fdb6e829e5fb8fa1639f2182cb49333569 [5]
Link: https://github.com/rust-lang/rust-bindgen/pull/2408 [6]
Link: https://github.com/rust-lang/rust-bindgen/issues/2094 [7]
Signed-off-by: Aakash Sen Sharma <aakashsensharma@gmail.com>
Closes: https://github.com/Rust-for-Linux/linux/issues/1013
Tested-by: Ariel Miculas <amiculas@cisco.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20230612194311.24826-1-aakashsensharma@gmail.com
[ Reworded commit message. Mentioned the `bindgen-cli` binary crate
change, linked to it and updated the Quick Start guide. Re-added a
deleted "as" word in a code comment and reflowed comment to respect
the maximum length. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Now that torture_random() uses swahw32(), its callers no longer see
not-so-random low-order bits, as these are now swapped up into the upper
16 bits of the torture_random() function's return value. This commit
therefore removes the right-shifting of torture_random() return values.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Now that torture_random() uses swahw32(), its callers no longer see
not-so-random low-order bits, as these are now swapped up into the upper
16 bits of the torture_random() function's return value. This commit
therefore removes the right-shifting of torture_random() return values.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
In order to gain better race coverage, move the test start/stop
waits in stutter_wait() to torture_hrtimeout_jiffies().
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
In order to gain better race coverage, move the CPU-migration timed
waits in torture_shuffle() to torture_hrtimeout_jiffies().
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
In order to gain better race coverage, move the CPU-hotplug-related
timed waits in torture_onoff() to torture_hrtimeout_jiffies().
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
