summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-06-22team: Fix possible deadlock during team enslaveIdo Schimmel
Both dev_uc_sync_multiple() and dev_mc_sync_multiple() require the source device to be locked by netif_addr_lock_bh(), but this is missing in team's enslave function, so add it. This fixes the following lockdep warning: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(_xmit_ETHER/1); local_irq_disable(); lock(&(&mc->mca_lock)->rlock); lock(&team_netdev_addr_lock_key); <Interrupt> lock(&(&mc->mca_lock)->rlock); *** DEADLOCK *** Fixes: cb41c997d444 ("team: team should sync the port's uc/mc addrs when add a port") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-22Merge tag 'linux-can-fixes-for-4.7-20160620' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2016-06-20 this is a pull request of 3 patches for the upcoming linux-4.7 release. The first patch is by Thor Thayer for the c_can/d_can driver. It fixes the registar access on Altera Cyclone devices, which caused CAN frames to have 0x0 in the first two bytes incorrectly. Wolfgang Grandegger's patch for the at91 driver fixes a hanging driver under high bus load situations. A patch for the gs_usb driver by Maximilian Schneider adds support for the bytewerk.org candleLight interface. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-22Merge tag 'gpio-v4.7-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "More GPIO fixes. Most prominent the gpiod_to_irq() fix brought to my attention by Hans de Goede. The hardening patch is a consequence of the reasoning around that bug. - It was discovered that too many parts of the kernel does not respect gpiod_to_irq() returning zero for an invalid IRQ. While this gets fixed, we need to make it return negative errorcodes again. - Harden the library a bit when passed error pointers. It is a bug to use these, but let's be helpful and warn the users. - Fix an uninitialized spinlock in the 104-idi-48 driver" * tag 'gpio-v4.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: make library immune to error pointers gpio: make sure gpiod_to_irq() returns negative on NULL desc gpio: 104-idi-48: Fix missing spin_lock_init for ack_lock
2016-06-22Merge tag 'iio-fixes-for-4.7b' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: Second set of IIO fixes for the 4.7 cycle. This includes one tracked regression (Arnd's patch for the ad7606). The other two have I think always been broken. * inv_mpu6050 - Fix a use after free in the ACPI code. * ad5933 - The code for setting the cycles had a bug that meant it was simply wrong. * ad7606_spi - Fix a regression that got introduced in a buggy cleanup of a sparse warning.
2016-06-22pinctrl: tegra: Fix build dependencyAxel Lin
I got below build error: ERROR: "tegra_xusb_padctl_legacy_probe" [drivers/phy/tegra/phy-tegra-xusb.ko] undefined! with below build configuration: CONFIG_ARCH_TEGRA=y CONFIG_PINCTRL_TEGRA_XUSB=y CONFIG_PHY_TEGRA_XUSB=y The problem is below line in drivers/pinctrl/Makefile obj-$(CONFIG_PINCTRL_TEGRA) += tegra/ So even CONFIG_PINCTRL_TEGRA_XUSB=y is set, kbuild still does not compile the code in drivers/pinctrl/tegra folder if !CONFIG_PINCTRL_TEGRA. phy-tegra-xusb.c does not use any symbol from pinctrl-tegra.c, so build pinctrl-tegra.c only when CONFIG_PINCTRL_TEGRA is set. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-22gpio: tegra: Make lockdep class file-scopedThierry Reding
Commit b546be0db955 ("gpio: tegra: Get rid of all file scoped global variables") moved all file scoped variables into the driver-private structure to allow potentially multiple instances of the driver. The change also included turning the lockdep class into a driver-private field, which doesn't work and produces error messages such as this: [ 0.142310] BUG: key ffff8000fb3f7ab0 not in .data! Make the lockdep class file-scoped again to fix this issue. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-22pinctrl: single: Fix missing flush of posted write for a wakeirqTony Lindgren
With many repeated suspend resume cycles, the pin specific wakeirq may not always work on omaps. This is because the write to enable the pin interrupt may not have reached the device over the interconnect before suspend happens. Let's fix the issue with a flush of posted write with a readback. Cc: stable@vger.kernel.org Reported-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-22pinctrl: imx: Do not treat a PIN without MUX register as an errorAlexander Shiyan
Some PINs do not have a MUX register, it is not an error. It is necessary to allow the continuation of the PINs configuration, otherwise the whole PIN-group will be configured incorrectly. Cc: stable@vger.kernel.org Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-22arm64: hibernate: Don't hibernate on systems with stuck CPUsJames Morse
Hibernate relies on cpu hotplug to prevent secondary cores executing the kernel text while it is being restored. Add a call to cpus_are_stuck_in_kernel() to determine if there are CPUs not counted by 'num_online_cpus()', and prevent hibernate in this case. Fixes: 82869ac57b5 ("arm64: kernel: Add support for hibernate/suspend-to-disk") Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-06-22arm64: smp: Add function to determine if cpus are stuck in the kernelJames Morse
kernel/smp.c has a fancy counter that keeps track of the number of CPUs it marked as not-present and left in cpu_park_loop(). If there are any CPUs spinning in here, features like kexec or hibernate may release them by overwriting this memory. This problem also occurs on machines using spin-tables to release secondary cores. After commit 44dbcc93ab67 ("arm64: Fix behavior of maxcpus=N") we bring all known cpus into the secondary holding pen, meaning this memory can't be re-used by kexec or hibernate. Add a function cpus_are_stuck_in_kernel() to determine if either of these cases have occurred. Signed-off-by: James Morse <james.morse@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-06-22ALSA: hda/tegra: iomem fixups for sparse warningsBen Dooks
The readl/writel are not being passed __iomem annotated variables, so fix the following sparse warnings by adding __iomem in: sound/pci/hda/hda_tegra.c:120:9: warning: incorrect type in argument 2 (different address spaces) sound/pci/hda/hda_tegra.c:120:9: expected void volatile [noderef] <asn:2>*addr sound/pci/hda/hda_tegra.c:120:9: got unsigned int [usertype] *addr sound/pci/hda/hda_tegra.c:125:16: warning: incorrect type in argument 1 (different address spaces) sound/pci/hda/hda_tegra.c:125:16: expected void const volatile [noderef] <asn:2>*addr sound/pci/hda/hda_tegra.c:125:16: got unsigned int [usertype] *addr sound/pci/hda/hda_tegra.c:134:13: warning: incorrect type in argument 1 (different address spaces) sound/pci/hda/hda_tegra.c:134:13: expected void const volatile [noderef] <asn:2>*addr sound/pci/hda/hda_tegra.c:134:13: got void *dword_addr sound/pci/hda/hda_tegra.c:137:9: warning: incorrect type in argument 2 (different address spaces) sound/pci/hda/hda_tegra.c:137:9: expected void volatile [noderef] <asn:2>*addr sound/pci/hda/hda_tegra.c:137:9: got void *dword_addr sound/pci/hda/hda_tegra.c:146:13: warning: incorrect type in argument 1 (different address spaces) sound/pci/hda/hda_tegra.c:146:13: expected void const volatile [noderef] <asn:2>*addr sound/pci/hda/hda_tegra.c:146:13: got void *dword_addr sound/pci/hda/hda_tegra.c:156:13: warning: incorrect type in argument 1 (different address spaces) sound/pci/hda/hda_tegra.c:156:13: expected void const volatile [noderef] <asn:2>*addr sound/pci/hda/hda_tegra.c:156:13: got void *dword_addr sound/pci/hda/hda_tegra.c:159:9: warning: incorrect type in argument 2 (different address spaces) sound/pci/hda/hda_tegra.c:159:9: expected void volatile [noderef] <asn:2>*addr sound/pci/hda/hda_tegra.c:159:9: got void *dword_addr sound/pci/hda/hda_tegra.c:168:13: warning: incorrect type in argument 1 (different address spaces) sound/pci/hda/hda_tegra.c:168:13: expected void const volatile [noderef] <asn:2>*addr sound/pci/hda/hda_tegra.c:168:13: got void *dword_addr sound/pci/hda/hda_tegra.c:173:23: warning: incorrect type in initializer (incompatible argument 2 (different address spaces)) sound/pci/hda/hda_tegra.c:173:23: expected void ( *reg_writel )( ... ) sound/pci/hda/hda_tegra.c:173:23: got void ( static [toplevel] *<noident> )( ... ) sound/pci/hda/hda_tegra.c:174:22: warning: incorrect type in initializer (incompatible argument 1 (different address spaces)) sound/pci/hda/hda_tegra.c:174:22: expected unsigned int ( *reg_readl )( ... ) sound/pci/hda/hda_tegra.c:174:22: got unsigned int ( static [toplevel] *<noident> )( ... ) sound/pci/hda/hda_tegra.c:175:23: warning: incorrect type in initializer (incompatible argument 2 (different address spaces)) sound/pci/hda/hda_tegra.c:175:23: expected void ( *reg_writew )( ... ) sound/pci/hda/hda_tegra.c:175:23: got void ( static [toplevel] *<noident> )( ... ) sound/pci/hda/hda_tegra.c:176:22: warning: incorrect type in initializer (incompatible argument 1 (different address spaces)) sound/pci/hda/hda_tegra.c:176:22: expected unsigned short ( *reg_readw )( ... ) sound/pci/hda/hda_tegra.c:176:22: got unsigned short ( static [toplevel] *<noident> )( ... ) sound/pci/hda/hda_tegra.c:177:23: warning: incorrect type in initializer (incompatible argument 2 (different address spaces)) sound/pci/hda/hda_tegra.c:177:23: expected void ( *reg_writeb )( ... ) sound/pci/hda/hda_tegra.c:177:23: got void ( static [toplevel] *<noident> )( ... ) sound/pci/hda/hda_tegra.c:178:22: warning: incorrect type in initializer (incompatible argument 1 (different address spaces)) sound/pci/hda/hda_tegra.c:178:22: expected unsigned char ( *reg_readb )( ... ) sound/pci/hda/hda_tegra.c:178:22: got unsigned char ( static [toplevel] *<noident> )( ... ) Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-06-22phy-sun4i-usb: Fix irq free conditions to match request conditionsHans de Goede
commit 5cf700ac9d50 ("phy: phy-sun4i-usb: Fix optional gpios failing probe") changed the condition under which irqs are requested, but omitted matching changes to sun4i_usb_phy_remove(). This commit fixes this. Fixes: 5cf700ac9d50 ("phy: phy-sun4i-usb: Fix optional gpios failing probe") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-06-22PM / devfreq: fix initialization of current frequency in last statusLukasz Luba
Some systems need current frequency from last_status for calculation but it is zeroed during initialization. When the device starts there is no history, but we can assume that the last frequency was the same as the initial frequency (which is also used in 'previous_freq'). The log shows the result of this misinterpreted value. [ 2.042847] ... Failed to get voltage for frequency 0: -34 Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Reviewed-by: Javi Merino <javi.merino@arm.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-22PM / devfreq: exynos-nocp: Remove incorrect IS_ERR() checkDan Carpenter
Smatch complains because platform_get_resource() returns NULL on error and not an error pointer so the check is wrong. Julia Lawall pointed out that normally we don't check these, because devm_ioremap_resource() has a check for NULL. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-22PM / devfreq: remove double put_deviceMyungJoo Ham
When device_register() returns with error, it has already done put_device() on the input device pointer. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-22PM / devfreq: fix double call put_deviceCai Zhiyong
1295 */ 1296 void device_unregister(struct device *dev) 1297 { 1298 pr_debug("device: '%s': %s\n", dev_name(dev), __func__); 1299 device_del(dev); 1300 put_device(dev); 1301 } 1302 EXPORT_SYMBOL_GPL(device_unregister); 1303 device_unregister is called put_device, there is no need to call put_device(&devfreq->dev) again. Signed-off-by: Cai Zhiyong <caizhiyong@huawei.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-22PM / devfreq: fix duplicated kfree on devfreq pointerMyungJoo Ham
device_unregister() calls kfree already. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-22PM / devfreq: devm_kzalloc to have dev pointer more preciselyMyungJoo Ham
devm_kzalloc of devfreq's statistics data structure has been using its parent device as the dev allocated for. If a device's devfreq is disabled in run-time, such allocated memory won't be freed. Desginating more precisely with the devfreq device pointer fixes the issue. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-22ACPICA: Namespace: Fix deadlock triggered by MLC support in dynamic table ↵Lv Zheng
loading The new module-level code (MLC) approach invokes MLC on the per-table basis, but the dynamic loading support of this is incorrect because of the lock order: acpi_ns_evaluate acpi_ex_enter_intperter acpi_ns_load_table (triggered by Load opcode) acpi_ns_exec_module_code_list acpi_ex_enter_intperter The regression is introduced by the following commit: Commit: 2785ce8d0da1cac9d8f78615e116cf929e9a9123 ACPICA Commit: 071eff738c59eda1792ac24b3b688b61691d7e7c Subject: ACPICA: Add per-table execution of module-level code This patch fixes this regression by unlocking the interpreter lock before invoking MLC. However, the unlocking is done to the acpi_ns_load_table(), in which the interpreter lock should be locked by acpi_ns_parse_table() but it wasn't. Fixes: 2785ce8d0da1 (ACPICA: Add per-table execution of module-level code) Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: 4.5+ <stable@vger.kernel.org> # 4.5+ [ rjw : Subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-21arm64: mm: remove page_mapping check in __sync_icache_dcacheShaokun Zhang
__sync_icache_dcache unconditionally skips the cache maintenance for anonymous pages, under the assumption that flushing is only required in the presence of D-side aliases [see 7249b79f6b4cc ("arm64: Do not flush the D-cache for anonymous pages")]. Unfortunately, this breaks migration of anonymous pages holding self-modifying code, where userspace cannot be reasonably expected to reissue maintenance instructions in response to a migration. This patch fixes the problem by removing the broken page_mapping(page) check from the cache syncing code, otherwise we may end up fetching and executing stale instructions from the PoU. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: <stable@vger.kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-06-21arm64: fix boot image dependencies to not generate invalid imagesMasahiro Yamada
I fixed boot image dependencies for arch/arm in commit 3939f3345050 ("ARM: 8418/1: add boot image dependencies to not generate invalid images"). I see a similar problem for arch/arm64; "make -jN Image Image.gz" would sometimes end up generating bad images where N > 1. Fix the dependency in arch/arm64/Makefile to avoid the race between "make Image" and "make Image.*". Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-06-21arm64: update ASID limitJean-Philippe Brucker
During a rollover, we mark the active ASID on each CPU as reserved, before allocating a new ID for the task that caused the rollover. This means that with N CPUs, we can only guarantee the new task to obtain a valid ASID if we have at least N+1 ASIDs. Update this limit in the initcall check. Note that this restriction was introduced by commit 8e648066 on the arch/arm side, which disallow re-using the previously active ASID on the local CPU, as it would introduce a TLB race. In addition, we only dispose of NUM_USER_ASIDS-1, since ASID 0 is reserved. Add this restriction as well. Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-06-21drm/i915/fbc: Disable on HSW by default for nowLyude
>From https://bugs.freedesktop.org/show_bug.cgi?id=96461 : This was kind of a difficult bug to track down. If you're using a Haswell system running GNOME and you have fbc completely enabled and working, playing videos can result in video artifacts. Steps to reproduce: - Run GNOME - Ensure FBC is enabled and active - Download a movie, I used the ogg version of Big Buck Bunny for this - Run `gst-launch-1.0 filesrc location='some_movie.ogg' ! decodebin ! glimagesink` in a terminal - Watch for about over a minute, you'll see small horizontal lines go down the screen. For the time being, disable FBC for Haswell by default. Stefan Richter reported kernel freezes (no video artifacts) when fbc is on. (E3-1245 v3 with HD P4600; openbox and some KDE and LXDE applications, thread begins at https://lkml.org/lkml/2016/4/26/813). We also got reports from Steven Honeyman on openbox+roxterm. v2 (From Paulo): - Add extra information to the commit message - Add Fixes tag - Rebase Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96461 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96464 Fixes: a98ee79317b4 ("drm/i915/fbc: enable FBC by default on HSW and BDW") Cc: stable@vger.kernel.org Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Lyude <cpaul@redhat.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1465487895-7401-1-git-send-email-cpaul@redhat.com (cherry picked from commit c7f7e2feffb0294302041507dfd5fc15f01afccc) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-06-21drm/i915: Revert DisplayPort fast link training featureMika Kahola
It has been found out that in some HW combination the DisplayPort fast link training feature caused screen flickering. Let's revert this feature for now until we can ensure that the feature works for all platforms. This is a manual revert of commits 5fa836a9d859 ("drm/i915: DP link training optimization") and 4e96c97742f4 ("drm/i915: eDP link training optimization"). Fixes: 5fa836a9d859 ("drm/i915: DP link training optimization") Fixes: 4e96c97742f4 ("drm/i915: eDP link training optimization") Cc: <stable@vger.kernel.org> # v4.2+ Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91393 Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1466410226-19543-1-git-send-email-mika.kahola@intel.com (cherry picked from commit 91df09d92ad82c8778ca218097bf827f154292ca)
2016-06-21drm/amd/powerplay: enable clock stretch feature for polarisRex Zhu
Power saving feature which reduces the amount of voltage needed for specific engine clocks. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-21drm/amdgpu/gfx8: update golden setting for polaris10Rex Zhu
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-21drm/amd/powerplay: enable avfs feature for polarisRex Zhu
avfs feature is for voltage control based on gpu system clock on polaris10 Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-21drm/amdgpu/atombios: add avfs struct for Polaris10/11Rex Zhu
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-21drm/amd/powerplay: add avfs related define for polarisRex Zhu
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-21drm/amd/powrplay: enable stutter_mode for polaris.Rex Zhu
To minimize the dram power expenditure during static -screen Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-21drm/amd/powerplay: disable UVD SMU handshake for MCLK.Rex Zhu
sync up with internal programming recommendations. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-21drm/amd/powerplay: initialize variables which were missed.Rex Zhu
Missing pcie dpm settings. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Ken Wang <Qingqing.Wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-21drm/amd/powerplay: enable PowerContainment feature for polaris10/11.Rex Zhu
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-21drm/amd/powerplay: need to notify system bios pcie device readyRex Zhu
before request performance state. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Ken Wang <Qingqing.Wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-06-21drm/amd/powerplay: fix bug that function parameter was incorect.Rex Zhu
Wrong value passed to acpi_pcie_perf_request. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Ken Wang <Qingqing.Wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-06-21drm/amd/powerplay: fix logic error.Rex Zhu
the error lead powerplay can't get display info in DGPU case. store_cc6_data just implement in APU. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-06-21drm: atmel-hlcdc: Fix OF graph parsingBoris Brezillon
atmel_hlcdc_create_outputs() iterates over OF graph nodes and releases the node (using of_node_put()) after each iteration, which is wrong since for_each_endpoint_of_node() is already taking care of that. Move the of_node_put() call in the error path. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Nicolas Ferre <nicolas.ferre@atmel.com> Fixes: 17a8e03e7e97 ("drm: atmel-hlcdc: rework the output code to support drm bridges")
2016-06-21drm: atmel-hlcdc: actually disable scaling when no scaling is requiredBoris Brezillon
The driver is only enabling scaling, but never disabling it, thus, if you enable the scaling feature once it stays enabled forever. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reported-by: Alex Vazquez <avazquez.dev@gmail.com> Reviewed-by: Nicolas Ferre <nicolas.ferre@atmel.com> Fixes: 1a396789f65a ("drm: add Atmel HLCDC Display Controller support") Cc: <stable@vger.kernel.org>
2016-06-20Merge tag 'v4.7-rockchip-clk-fixes1' of ↵Stephen Boyd
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-fixes A bunch of fixes. Some for the newly added rk3399 clock tree, some concerning error handling and initialization and a revert of the mmc-phase clock initialization, as this could conflict with the bootloader setting of this clock and a real solution to initing the phase correctly from dw_mmc went in as fix for 4.7 through the mmc tree. * tag 'v4.7-rockchip-clk-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: clk: rockchip: release io resource when failing to init clk on rk3399 clk: rockchip: fix cpuclk registration error handling clk: rockchip: Revert "clk: rockchip: reset init state before mmc card initialization" clk: rockchip: fix incorrect parent for rk3399's {c,g}pll_aclk_perihp_src clk: rockchip: mark rk3399 GIC clocks as critical clk: rockchip: initialize flags of clk_init_data in mmc-phase clock
2016-06-20clk: Fix return value check in oxnas_stdclk_probe()Wei Yongjun
In case of error, the function syscon_node_to_regmap() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Fixes: 0bbd72b4c64f ("clk: Add Oxford Semiconductor OXNAS Standard Clocks") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-06-20lockless next_positive()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-06-20libfs.c: new helper - next_positive()Al Viro
Return nth positive child after given or NULL if there's less than n left. dcache_readdir() and dcache_dir_lseek() switched to it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-06-20dcache_{readdir,dir_lseek}(): don't bother with nested ->d_lockAl Viro
Make sure that directory is locked shared in dcache_dir_lseek(); for dcache_readdir() it's already tru, and that's enough to make simple_positive() stable. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-06-20drm/amdgpu: initialize amdgpu_cgs_acpi_eval_object result valueNicolas Iooss
amdgpu_cgs_acpi_eval_object() returned the value of variable "result" without initializing it first. This bug has been found by compiling the kernel with clang. The compiler complained: drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c:972:14: error: variable 'result' is used uninitialized whenever 'for' loop exits because its condition is false [-Werror,-Wsometimes-uninitialized] for (i = 0; i < count; i++) { ^~~~~~~~~ drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c:1011:9: note: uninitialized use occurs here return result; ^~~~~~ drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c:972:14: note: remove the condition if it is always true for (i = 0; i < count; i++) { ^~~~~~~~~ drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c:864:12: note: initialize the variable 'result' to silence this warning int result; ^ = 0 Fixes: 3f1d35a03b3c ("drm/amdgpu: implement new cgs interface for acpi function") Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-20drm/amdgpu: precedence bug in amdgpu_device_init()Dan Carpenter
! has higher precedence than bitwise & so we need to add parenthesis for this to work as intended. Fixes: 048765ad5af7 ('amdgpu: fix asic initialization for virtualized environments (v2)') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-20PCI: Fix unaligned accesses in VC codeDavid Miller
The save/restore buffers for VC state is first composed of a 2-byte control register, then a bunch of 4-byte words. This causes unaligned accesses which trap on platform such as sparc. This is easy to fix by simply moving the buffer pointer forward by 4 bytes instead of 2 after dealing with the control register. The length adjustment needs to be changed likewise as well. Fixes: 5f8fc43217a0 ("PCI: Include pci/pcie/Kconfig directly from pci/Kconfig") Reported-by: Meelis Roos <mroos@linux.ee> Reported-by: Anatoly Pugachev <matorola@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v4.6+
2016-06-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "A couple more of d_walk()/d_subdirs reordering fixes (stable fodder; ought to solve that crap for good) and a fix for a brown paperbag bug in d_alloc_parallel() (this cycle)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix idiotic braino in d_alloc_parallel() autofs races much milder d_walk() race
2016-06-20Merge tag 'trace-v4.7-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "Two fixes for the tracing system: - When trace_printk() is used with a non constant format descriptor, it adds a NULL pointer into the trace format section, and the code isn't prepared to deal with it. This bug appeared by a change that was added in v3.5. - The ftracetest (selftests section) can't handle testing histograms when histograms are not configured. Currently it shows that they fail the test, when they should state that they are unsupported. This bug was added in the 4.7 merge window with the addition of the historgram code" * tag 'trace-v4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftracetest: Fix hist unsupported result in hist selftests tracing: Handle NULL formats in hold_module_trace_bprintk_format()
2016-06-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "Two more bugs fixes for 4.7: - a KVM regression introduced with the pgtable.c code split - a perf issue with two hardware PMUs using a shared event context" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/cpum_cf: use perf software context for hardware counters KVM: s390/mm: Fix CMMA reset during reboot
2016-06-20Merge tag 'hwmon-for-linus-v4.7-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Two stability fixes plus a security fix for the dell-smm driver" * tag 'hwmon-for-linus-v4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (dell-smm) Disallow fan_type() calls on broken machines hwmon: (dell-smm) Restrict fan control and serial number to CAP_SYS_ADMIN by default hwmon: (dell-smm) Fail in ioctl I8K_BIOS_VERSION when bios version is not a number
generated by cgit (git 2.34.1) at 2025-09-11 16:54:09 +0000