summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-10-24be2net: add vlan/rx-mode/flow-control config to be_setup()Sathya Perla
When a card is reset due to EEH error recovery or due to a suspend, rx-mode config (promisc/mc) is not being sent to the FW. be_setup() is called in these flows and is the best place for such config/re-config cmds. Hence include rx-mode, vlan and flow-control config in be_setup(). Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-24net_sched: cls_flow: use skb_header_pointer()Eric Dumazet
Dan Siemon would like to add tunnelling support to cls_flow This preliminary patch introduces use of skb_header_pointer() to help this task, while avoiding skb head reallocation because of deep packet inspection. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-25drivercore: Add helper macro for platform_driver boilerplateGrant Likely
For simple modules that contain a single platform_driver without any additional setup code then ends up being a block of duplicated boilerplate. This patch adds a new macro, module_platform_driver(), which replaces the module_init()/module_exit() registrations with template functions. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Reviewed-by: Magnus Damm <magnus.damm@gmail.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
2011-10-24MIPS: O32: Provide definition of registers ta0 .. ta3.Ralf Baechle
Later IRIX versions provide them in <sys/regdef.h> and gas also accepts $ta0 .. $ta3 since binutils 2.18 so Linux should do the same for source compatibility.
2011-10-24MIPS: perf: Add Octeon support for hardware perf.David Daney
Enable hardware counters for Octeon, and add the corresponding event mappings. Signed-off-by: David Daney <david.daney@cavium.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2790/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: perf: Add support for 64-bit perf counters.David Daney
The hard coded constants are moved to struct mips_pmu. All counter register access move to the read_counter and write_counter function pointers, which are set to either 32-bit or 64-bit access methods at initialization time. Many of the function pointers in struct mips_pmu were not needed as there was only a single implementation, these were removed. I couldn't figure out what made struct cpu_hw_events.msbs[] at all useful, so I removed it too. Some functions and other declarations were reordered to reduce the need for forward declarations. Signed-off-by: David Daney <david.daney@cavium.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2792/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: perf: Reorganize contents of perf support files.David Daney
The contents of arch/mips/kernel/perf_event.c and arch/mips/kernel/perf_event_mipsxx.c were divided in a seemingly ad hoc manner, with the first including the second. I moved all the hardware counter support code to perf_event_mipsxx.c and removed the gating #ifdefs to the Kconfig and Makefile. Now perf_event.c contains only the callchain support, everything else is in perf_event_mipsxx.c There are no code changes, only moving of functions from one file to the other, or removing empty unneeded functions. Signed-off-by: David Daney <david.daney@cavium.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Dezhong Diao <dediao@cisco.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2791/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: perf: Cleanup formatting in arch/mips/kernel/perf_event.cDavid Daney
Get rid of a bunch of useless inline declarations, and join a bunch of improperly split lines. Signed-off-by: David Daney <david.daney@cavium.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2793/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: Add accessor macros for 64-bit performance counter registers.David Daney
Signed-off-by: David Daney <david.daney@cavium.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2789/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: Add probes for more Octeon II CPUs.David Daney
Detect cn61XX, cn66XX and cn68XX CPUs in cpu_probe_cavium(). Signed-off-by: David Daney <david.daney@cavium.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2777/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: Add more CPU identifiers for Octeon II CPUs.David Daney
The CPU identifiers for cn68XX, cn66XX and cn61XX are known, so add them. Signed-off-by: David Daney <david.daney@cavium.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2776/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: XLR, XLS: Add comment for smp setupHillf Danton
It seems that BSP could be setup twice, but the nlm_cpu_ready array is only set for ASPs in smpboot.S, not including BSP. Signed-off-by: Hillf Danton <dhillf@gmail.com> Cc: "Jayachandran C." <jayachandranc@netlogicmicro.com> Cc: LKML <linux-kernel@vger.kernel.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2695/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>,
2011-10-24MIPS: JZ4740: GPIO: Check correct IRQ in demux handlerLars-Peter Clausen
Check the trigger direction for the triggered IRQ instead of the parent IRQ. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: http://patchwork.linux-mips.org/patch/2433/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: JZ4740: GPIO: Simplify IRQ demuxerLars-Peter Clausen
We already know the base IRQ for a GPIO chip, so there is no need to recalculate it in the demux handler. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Lars-Peter Clausen <lars@metafoo.de> Patchwork: http://patchwork.linux-mips.org/patch/2432/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: JZ4740: Use generic irq chipLars-Peter Clausen
Use the generic irq chip framework to implement the jz4740 INTC and GPIO irq chips. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/2434/ Patchwork: https://patchwork.linux-mips.org/patch/2771/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: Alchemy: remove all CONFIG_SOC_AU1??? definesManuel Lauss
Now that no driver any longer depends on the CONFIG_SOC_AU1??? symbols, it's time to get rid of them: Move some of the platform devices to the boards which can use them, Rename a few (unused) constants in the header, Replace them with MIPS_ALCHEMY in the various Kconfig files. Finally delete them altogether from the Alchemy Kconfig file. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2707/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: Alchemy: kill au1xxx.h headerManuel Lauss
No longer required Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2705/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> delete mode 100644 arch/mips/include/asm/mach-au1x00/au1xxx.h
2011-10-24MIPS: Alchemy: clean DMA code of CONFIG_SOC_AU1??? definesManuel Lauss
This patch gets rid of all CONFIG_SOC_AU1XXX defines in DMA/DBDMA-related code. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2704/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS, IDE: Alchem, au1xxx-ide: Remove pb1200/db1200 header depManuel Lauss
au1xxx-ide uses defines from the pb1200/db1200 headers: get DBDMA ID through platform resource information, hardcode register spacing. The only 2 users of this driver (and the only boards it can really work on realiably) use the same register layout. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Cc: linux-ide@vger.kernel.org To: Linux-MIPS <linux-mips@linux-mips.org> Cc: linux-ide@vger.kernel.org Acked-by: David S. Miller <davem@davemloft.net> Patchwork: https://patchwork.linux-mips.org/patch/2716/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: Alchemy: Redo PCI as platform driverManuel Lauss
- Rewrite Alchemy PCI support as a platform driver. - Fixup boards which have PCI. Run-tested on DB1500 and DB1550. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2706/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> delete mode 100644 arch/mips/alchemy/common/pci.c delete mode 100644 arch/mips/pci/fixup-au1000.c delete mode 100644 arch/mips/pci/ops-au1000.c create mode 100644 arch/mips/pci/pci-alchemy.c
2011-10-24MIPS: Alchemy: more base address cleanupManuel Lauss
remove all redundant peripheral base address defines, fix all affected boards and drivers. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2700/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: Alchemy: rewrite USB platform setup.Manuel Lauss
Use runtime CPU detection to setup all USB parts. Remove the Au1200 OTG and UDC platform devices since there are no drivers for them anyway. Clean up the USB address mess in the au1000 header. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2703/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: Alchemy: abstract USB block control register accessManuel Lauss
Alchemy chips have one or more registers which control access to the usb blocks as well as PHY configuration. I don't want the OHCI/EHCI glues to know about the different registers and bits; new code hides the gory details of USB configuration from them. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Cc: linux-usb@vger.kernel.org Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Patchwork: https://patchwork.linux-mips.org/patch/2709/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 drivers/usb/host/alchemy-common.c
2011-10-24MIPS: Remove __init from add_wired_entry()Manuel Lauss
For Alchemy-PCI I need to add a wired entry after resuming from RAM; remove the __init from add_wired_entry() so that this actually works. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2684/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MMC: au1xmmc: Remove Alchemy CPU subtype dependenciesManuel Lauss
Replace all occurrences of CONFIG_SOC_AU1??? with runtime feature detection. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Cc: linux-mmc@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/2683/ Acked-by: Chris Ball <cjb@laptop.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: Alchemy: support multiple GPIO styles in one kernelManuel Lauss
For GPIOLIB=y decide at runtime which gpiochips to register; in the GPIOLIB=n case, the gpio headers need to be reshuffled a bit to make multiple implementations coexist peacefully. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2679/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: Alchemy: Always build power codeManuel Lauss
No reason NOT to build it Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2678/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24NET: au1000_eth: Pass MACDMA address through platform resource info.Manuel Lauss
This patch removes the last hardcoded base address from the au1000_eth driver. The base address of the MACDMA unit was derived from the platform device id; if someone registered the MACs in inverse order both would not work. So instead pass the base address of the DMA unit to the driver with the other platform resource information. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Acked-by: David S. Miller <davem@davemloft.net> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2674/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24ipv4: avoid useless call of the function check_peer_pmtuGao feng
In func ipv4_dst_check,check_peer_pmtu should be called only when peer is updated. So,if the peer is not updated in ip_rt_frag_needed,we can not inc __rt_peer_genid. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-24Merge branch 'master' of ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2011-10-24Devicetree: Expand on ARM Primecell binding documentationGrant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-24TCP: remove TCP_DEBUGFlavio Leitner
It was enabled by default and the messages guarded by the define are useful. Signed-off-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-24net: Fix driver name for mdio-gpio.cDirk Eibach
Since commit "7488876... dt/net: Eliminate users of of_platform_{,un}register_driver" there are two platform drivers named "mdio-gpio" registered. I renamed the of variant to "mdio-ofgpio". Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-24ARM: 7139/1: fix compilation with CONFIG_ARM_ATAG_DTB_COMPAT and large ↵Nicolas Pitre
TEXT_OFFSET If TEXT_OFFSET is too large (e.g. like on MSM) the resulting immediate argument gets wider than 8 bits. Noticed by David Brown <davidb@codeaurora.org> Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-24Merge remote-tracking branch 'rmk/devel-stable' into HEADRob Herring
2011-10-24m68k: Finally remove leftover markers sectionsKirill Tkhai
Markers have removed already twice: 1: fc5377668c3d808e1d53c4aee152c836f55c3490 2: eb878b3bc0349344dbf70c51bf01fc734d5cf2d3 But a little bit is still here. Signed-off-by: Tkhai Kirill <tkhai@yandex.ru> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-10-24m68k/mac: Fix mac_irq_pending() for PSC MACE and SCCFinn Thain
Add missing return statement. The docs say that the level 4 PSC IRQs relate to MACE DMA and SCC. Since those drivers don't call mac_irq_pending() this patch has no affect. But it should be fixed all the same, since it can be useful for MACE debugging. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-10-24m68k/mac: Fix compiler warning in via_read_time()Finn Thain
The algorithm described in the comment compares two reads from the RTC but the code actually reads once and compares the result to an uninitialized value. This causes the compiler to warn, "last_result maybe used uninitialized". Make the code match the comment, fix the warning and perhaps improve reliability. Tested on a Quadra 700. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-10-24zorro: Fix four checkpatch warningsJim Rotmalm
zorro-driver.c: fix four checkpatch warnings of: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable I had a cat. The cat was mine. His name was Zorro. Amiga is fine. Signed-off-by: Jim Rotmalm <jim.rotmalm@gmail.com> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-10-24CIFS: Make cifs_push_locks send as many locks at once as possiblePavel Shilovsky
that reduces a traffic and increases a performance. Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2011-10-24CIFS: Send as many mandatory unlock ranges at once as possiblePavel Shilovsky
that reduces a traffic and increases a performance. Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2011-10-24hwmon: (w83627ehf) Better fix for negative temperature valuesJean Delvare
It is more efficient to left-align 8-bit temperature values, so that 8-bit and 9-bit temperature values can be handled exactly the same way in the rest of the code. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-10-24hwmon: (w83627ehf) Uninline is_word_sizedJean Delvare
Helper function is_word_sized has grown too much to be kept inline. It was OK when there were only 6 word-sized registers but support for new devices have made the list much longer. The function is also called from more places than before. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-10-24hwmon: (lm75) Document why clones are not detectedJean Delvare
Explain why clones of the LM75 are generally not detected by the driver, and why this isn't going to change. Also update the documentation to reflect the list of chip names currently supported by the driver. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-10-24hwmon: (w83627ehf) Move fan pins check to a separate functionJean Delvare
Move the check of fan pin usage to a separate function. This improves readability, and will make it easier to integrate chip-specific conditions. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-10-24hwmon: (w83627ehf) Skip reading unused voltage registersJean Delvare
When in6 is missing, don't read the corresponding registers, it's a waste of time. The logic is similar to what we do for fans and temperatures. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-10-24hwmon: (lm75) Add support for Analog Devices ADT75Michael Hennerich
Add datasheet reference and device ID for ADT75. The ADT75, like some other LM75 derivatives, needs to be instantiated using methods 1, 2, or 4. For more information see Documentation/i2c/instantiating-devices. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-10-24hwmon: (pmbus_core) Simplify sign extensionsGuenter Roeck
Shift operations can be used for sign extensions. Use it. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2011-10-24hwmon: (pmbus) Add support for Lineage Power DC-DC convertersGuenter Roeck
Add device IDs and reference to datasheets for Lineage Power DC-DC converters. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2011-10-24hwmon: (pmbus/ltc2978) Add support for LTC3880 to LTC2978 driverGuenter Roeck
The LTC3880 PMBus command set is comparable to LTC2978. Add support for it to the LTC2978 driver. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
generated by cgit (git 2.34.1) at 2025-09-21 10:52:13 +0000