summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-10-24mfd: Add more checks for WM8994 being active during suspendMark Brown
Enhancements to the WM8994 audio driver and new features on more modern devices in the series mean that we can no longer rely on VMID being active as an indication that the device is active. Add further checks for digital paths and microphone detection. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24arm: BeagleBoard: add support for the twl4030-madcKyle Manna
Signed-off-by: Kyle Manna <kyle@kylemanna.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Turn on the twl4030-madc MADC clockKyle Manna
Without turning the MADC clock on, no MADC conversions occur. $ cat /sys/class/hwmon/hwmon0/device/in8_input [ 53.428436] twl4030_madc twl4030_madc: conversion timeout! cat: read error: Resource temporarily unavailable Signed-off-by: Kyle Manna <kyle@kylemanna.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Allow WM8994 LDO enable pulls to be disabledMark Brown
In systems where the LDO enables are always driven (for example, being connected to an always on supply rail or a GPIO which is driven by the CPU even in suspend) then we can disable the pull downs on the LDO for a small power savings. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Make sure to request twl6030 IRQ before using the irq_numAxel Lin
I was trying to fix the error handling part because in the case of request_irq failure, it should call kthread_stop instead of free_irq. But it seems more reasonable to do request_irq before calling kthread_run. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Refactor ab8500 GPADC API, add raw accessKarl Komierowski
Refactor the GPADC interface to avoid bugs in calling code: - ab8500_gpadc_[convert|read_raw|ad_to_voltage] clarifies each functions use case, *convert wraps *read_raw, and we can access raw ADC values properly. - Renamed gpadc function arguments from "input" to "channel" to clarify use, so we don't get confused again. Signed-off-by: Kalle Komierowski <kalle.komierowski@stericsson.com> Reviewed-by: Mattias Wallin <mattias.wallin@stericsson.com> Reviewed-by: John Beckett <john.beckett@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Clean timberdale error handling code upJulia Lawall
In the first three cases, ioremap has been called, so iounmap is needed. A new label for this is introduced, to differentiate it from err_msix, which is the first point at which msix_entries actually needs to be freed. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Add missing #ifdef around tc3589x PM blockLinus Walleij
The CONFIG_PM code was unconditionally compiled in despite the dev_pm_ops only being included into the driver struct if used. Fix this by adding the missing #ifdef. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Define asic3 gpio_chip labelPaul Parsons
Defined the gpio_chip label in the mfd/asic3 driver for diagnostics. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Make asic3_clk_enable() a void functionPaul Parsons
The return value of asic3_clk_enable() was neither used nor useful. So let's make it a void function, and thereby match asic3_clk_disable(). Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Add asic3 based LED suspend/resume handlersPaul Parsons
Added led suspend/resume handlers to the leds/leds-asic3 and mfd/asic3 drivers. On suspend the leds will be turned off and their clocks disabled. On resume the reverse. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Fix asic3 based SD card resume after suspendPaul Parsons
The mfd/asic3 driver did not define the suspend/resume handlers for the mmc cell driver. Consequently the mmc driver did not resume properly after returning from suspend, making sd cards unusable and preventing suspend from being entered a second time. This patch adds the suspend/resume handlers, fixing the problem. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Remove spurious newlines from wm831x-irq.cMark Brown
More annoying than usual as they're in the middle of a function. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Convert pcf50633 to use new register map APIMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Fix section mismatch warning in ab3550-coreWanlong Gao
This patch fixes: WARNING: drivers/mfd/built-in.o(.data+0x9998): Section mismatch in reference from the variable ab3550_driver to the function .init.text:ab3550_probe() The variable ab3550_driver references the function __init ab3550_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24OMAP: SPI: Fix the trying to free nonexistent resource errorShubhrajyoti D
Currently there is a request_mem_region(r->start, .. followed by r->start += pdata->regs_offset; And then in remove r = platform_get_resource(pdev, IORESOURCE_MEM, 0); release_mem_region(r->start, resource_size(r)); Here the offset addition is not taken care. Fix the code for the same. Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-24Merge commit 'v3.1' into spi/nextGrant Likely
2011-10-24ALSA: HDA: Add new revision for ALC662David Henningsson
The revision 0x100300 was found for ALC662. It seems to work well with patch_alc662. Cc: stable@kernel.org BugLink: http://bugs.launchpad.net/bugs/877373 Tested-by: Shengyao Xue <Shengyao.xue@canonical.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Acked-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-24ARM: CSR: PM: use outer_resume to resume L2 cacheBarry Song
now we move l2x0 resume to Linux from bootloader since l2x0 already has resume support in core. Signed-off-by: Barry Song <Baohua.Song@csr.com>
2011-10-24ARM: CSR: call l2x0_of_init to init L2 cache of SiRFprimaIIBarry Song
Cc: Rob Herring <robherring2@gmail.com> Signed-off-by: Barry Song <Baohua.Song@csr.com>
2011-10-24Merge branch 'l2x0' of rmk tree into prima2-l2x0Barry Song
2011-10-24nfs41: implement DESTROY_CLIENTID operationMi Jinlong
According to rfc5661 18.50, implement DESTROY_CLIENTID operation. Signed-off-by: Mi Jinlong <mijinlong@cn.fujitsu.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-10-24nfsd4: typo logical vs bitwise negate for want_maskBenny Halevy
Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-10-24nfsd4: allow NFS4_SHARE_SIGNAL_DELEG_WHEN_RESRC_AVAIL | ↵Benny Halevy
NFS4_SHARE_PUSH_DELEG_WHEN_UNCONTENDED RFC5661 says: The client may set one or both of OPEN4_SHARE_ACCESS_WANT_SIGNAL_DELEG_WHEN_RESRC_AVAIL and OPEN4_SHARE_ACCESS_WANT_PUSH_DELEG_WHEN_UNCONTENDED. Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-10-24nfsd4: seq->status_flags may be used unitializedBenny Halevy
Reported-by: Gopala Suryanarayana <gsuryanarayana@vmware.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-10-24nfsd41: use SEQ4_STATUS_BACKCHANNEL_FAULT when cb_sequence is invalidBenny Halevy
Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-10-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-nextDavid S. Miller
2011-10-24Linux 3.1v3.1Linus Torvalds
2011-10-24ipv4: tcp: fix TOS value in ACK messages sent from TIME_WAITEric Dumazet
There is a long standing bug in linux tcp stack, about ACK messages sent on behalf of TIME_WAIT sockets. In the IP header of the ACK message, we choose to reflect TOS field of incoming message, and this might break some setups. Example of things that were broken : - Routing using TOS as a selector - Firewalls - Trafic classification / shaping We now remember in timewait structure the inet tos field and use it in ACK generation, and route lookup. Notes : - We still reflect incoming TOS in RST messages. - We could extend MuraliRaja Muniraju patch to report TOS value in netlink messages for TIME_WAIT sockets. - A patch is needed for IPv6 Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-24rtnetlink: Add missing manual netlink notification in dev_change_net_namespacesEric W. Biederman
Renato Westphal noticed that since commit a2835763e130c343ace5320c20d33c281e7097b7 "rtnetlink: handle rtnl_link netlink notifications manually" was merged we no longer send a netlink message when a networking device is moved from one network namespace to another. Fix this by adding the missing manual notification in dev_change_net_namespaces. Since all network devices that are processed by dev_change_net_namspaces are in the initialized state the complicated tests that guard the manual rtmsg_ifinfo calls in rollback_registered and register_netdevice are unnecessary and we can just perform a plain notification. Cc: stable@kernel.org Tested-by: Renato Westphal <renatowestphal@gmail.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-24ipv4: fix ipsec forward performance regressionYan, Zheng
There is bug in commit 5e2b61f(ipv4: Remove flowi from struct rtable). It makes xfrm4_fill_dst() modify wrong data structure. Signed-off-by: Zheng Yan <zheng.z.yan@intel.com> Reported-by: Kim Phillips <kim.phillips@freescale.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-24jme: fix irq storm after suspend/resumeClemens Buchacher
If the device is down during suspend/resume, interrupts are enabled without a registered interrupt handler, causing a storm of unhandled interrupts until the IRQ is disabled because "nobody cared". Instead, check that the device is up before touching it in the suspend/resume code. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=39112 Helped-by: Adrian Chadd <adrian@freebsd.org> Helped-by: Mohammed Shafi <shafi.wireless@gmail.com> Signed-off-by: Clemens Buchacher <drizzd@aon.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-24route: fix ICMP redirect validationFlavio Leitner
The commit f39925dbde7788cfb96419c0f092b086aa325c0f (ipv4: Cache learned redirect information in inetpeer.) removed some ICMP packet validations which are required by RFC 1122, section 3.2.2.2: ... A Redirect message SHOULD be silently discarded if the new gateway address it specifies is not on the same connected (sub-) net through which the Redirect arrived [INTRO:2, Appendix A], or if the source of the Redirect is not the current first-hop gateway for the specified destination (see Section 3.3.1). Signed-off-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-24net: hold sock reference while processing tx timestampsRichard Cochran
The pair of functions, * skb_clone_tx_timestamp() * skb_complete_tx_timestamp() were designed to allow timestamping in PHY devices. The first function, called during the MAC driver's hard_xmit method, identifies PTP protocol packets, clones them, and gives them to the PHY device driver. The PHY driver may hold onto the packet and deliver it at a later time using the second function, which adds the packet to the socket's error queue. As pointed out by Johannes, nothing prevents the socket from disappearing while the cloned packet is sitting in the PHY driver awaiting a timestamp. This patch fixes the issue by taking a reference on the socket for each such packet. In addition, the comments regarding the usage of these function are expanded to highlight the rule that PHY drivers must use skb_complete_tx_timestamp() to release the packet, in order to release the socket reference, too. These functions first appeared in v2.6.36. Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Cc: <stable@vger.kernel.org> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-24tcp: md5: add more const attributesEric Dumazet
Now tcp_md5_hash_header() has a const tcphdr argument, we can add more const attributes to callers. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-24Add ethtool -g support to virtio_netRick Jones
Add support for reporting ring sizes via ethtool -g to the virtio_net driver. Signed-off-by: Rick Jones <rick.jones2@hp.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-24tcp: md5: dont write skb head in tcp_md5_hash_header()Eric Dumazet
tcp_md5_hash_header() writes into skb header a temporary zero value, this might confuse other users of this area. Since tcphdr is small (20 bytes), copy it in a temporary variable and make the change in the copy. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-24Merge git://git.infradead.org/iommu-2.6Linus Torvalds
* git://git.infradead.org/iommu-2.6: intel-iommu: fix superpage support in pfn_to_dma_pte() intel-iommu: set iommu_superpage on VM domains to lowest common denominator intel-iommu: fix return value of iommu_unmap() API MAINTAINERS: Update VT-d entry for drivers/pci -> drivers/iommu move intel-iommu: Export a flag indicating that the IOMMU is used for iGFX. intel-iommu: Workaround IOTLB hang on Ironlake GPU intel-iommu: Fix AB-BA lockdep report
2011-10-24Merge branch 'for-linus' of http://people.redhat.com/agk/git/linux-dmLinus Torvalds
* 'for-linus' of http://people.redhat.com/agk/git/linux-dm: dm kcopyd: fix job_pool leak
2011-10-24x86: Fix S4 regressionTakashi Iwai
Commit 4b239f458 ("x86-64, mm: Put early page table high") causes a S4 regression since 2.6.39, namely the machine reboots occasionally at S4 resume. It doesn't happen always, overall rate is about 1/20. But, like other bugs, once when this happens, it continues to happen. This patch fixes the problem by essentially reverting the memory assignment in the older way. Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Yinghai Lu <yinghai.lu@oracle.com> [ We'll hopefully find the real fix, but that's too late for 3.1 now ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-24Merge branch 'drm-intel-next' of git://people.freedesktop.org/~keithp/linux ↵Dave Airlie
into drm-core-next * 'drm-intel-next' of git://people.freedesktop.org/~keithp/linux: (72 commits) drm/i915/dp: Fix eDP on PCH DP on CPT/PPT drm/i915/dp: Introduce is_cpu_edp() drm/i915: use correct SPD type value drm/i915: fix ILK+ infoframe support drm/i915: add DP test request handling drm/i915: read full receiver capability field during DP hot plug drm/i915/dp: Remove eDP special cases from bandwidth checks drm/i915/dp: Fix the math in intel_dp_link_required drm/i915/panel: Always record the backlight level again (but cleverly) i915: Move i915_read/write out of line drm/i915: remove transcoder PLL mashing from mode_set per specs drm/i915: if transcoder disable fails, say which drm/i915: set watermarks for third pipe on IVB drm/i915: export a CPT mode set verification function drm/i915: fix transcoder PLL select masking drm/i915: fix IVB cursor support drm/i915: fix debug output for 3 pipe configs drm/i915: add PLL sharing support to handle 3 pipes drm/i915: fix PCH PLL assertion check for 3 pipes drm/i915: use transcoder select bits on VGA and HDMI on CPT ...
2011-10-24target: Remove legacy se_task->task_timer and associated logicNicholas Bellinger
This patch removes the legacy usage of se_task->task_timer and associated infrastructure that originally was used as a way to help manage buggy backend SCSI LLDs that in certain cases would never return back an outstanding task. This includes the removal of target_complete_timeout_work(), timeout logic from transport_complete_task(), transport_task_timeout_handler(), transport_start_task_timer(), the per device task_timeout configfs attribute, and all task_timeout associated structure members and defines in target_core_base.h This is being removed in preparation to make transport_complete_task() run in lock-less mode. Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-10-24target: Fix incorrect transport_sent usageNicholas Bellinger
This patch converts target-core to use se_cmd->t_transport_sent instead of a duplicated se_cmd->transport_sent member in a handful of locations. It also updates iscsi_target to properly use ->t_transport_sent instead of it's own iscsi_cmd_t->transport_sent value that was not being assigned. Reported-by: Christoph Hellwig <hch@lst.de> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-10-24target: re-use the command S/G list for single-task commandsChristoph Hellwig
If we only have a single task per command (which at least in my testing is the by far most common case) we do not have to allocate a new per-task S/G list but can reuse the one from the command. (nab: Fix BIDI handling in transport_free_dev_tasks) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-10-24target: Fix BIDI t_task_cdb handling in transport_generic_new_cmdNicholas Bellinger
This patch fixes a bug for BIDI handling in transport_generic_new_cmd() where cmd->t_task_cdbs_left and Co. where not taking into account the extra task count generated during the first call to transport_allocate_data_tasks(). Cc: Christoph Hellwig <hch@lst.de> Cc: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-10-24target: remove transport_allocate_tasksChristoph Hellwig
There were only two callers, and one of them always wants the call to transport_allocate_data_tasks anyway. Also drop the constant lba argument to transport_allocate_data_tasks and move the variables inside it into the minimum required scope. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-10-24target: merge transport_new_cmd_obj into transport_generic_new_cmdChristoph Hellwig
These are two fairly small functions, and merging them gives a much more readable control flow, and opportunities for more useful comments. It also moves all code related to resources allocation closer together and allows to remove a forward declaration for transport_allocate_tasks. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-10-24target: remove the task_sg_bidi field se_task and pSCSI BIDI supportChristoph Hellwig
This field is never used given that BIDI handling happens at the command and not the task level. Remove it and the dead code in pscsi that tries to work on it. It also prevents pSCSI passthrough for the two currently enabled BIDI commands now that task->task_sg_bidi support has been removed. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-10-24target: transport_subsystem_check_init cleanupsNicholas Bellinger
Remove the now unnecessary extra call to transport_subsystem_check_init() in target_core_register_fabric(), and also merge transport_subsystem_reqmods() directly into transport_subsystem_check_init(). Reported-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-10-24target: use a workqueue for I/O completionsChristoph Hellwig
Instead of abusing the target processing thread for offloading I/O completion in the backends to user context add a new workqueue. This means completions can be processed as fast as available CPU time allows it, including in parallel with other completions and more importantly I/O submission or QUEUE FULL retries. This should give much better performance especially on loaded systems. As a fallout we can merge all the completed states into a single one. On the downside this change complicates lun reset handling a bit by requiring us to cancel a work item only for those states that have it initialized. The alternative would be to either always initialize the work item to a dummy handler, or always use the same handler and do a switch on the state. The long term solution will be a flag that says that the command has an initialized work item, but that's only going to be useful once we have more users. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
generated by cgit (git 2.34.1) at 2025-09-22 07:59:32 +0000