summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-06-09ALSA: hda - Add PCI ID for KabylakeVinod Koul
Kabylake shows up as PCI ID 0xa171. And Kabylake-LP as 0x9d71. Since these are similar to Skylake add these to SKL_PLUS macro Signed-off-by: Vinod Koul <vinod.koul@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-06-08qfq: don't leak skb if kzalloc failsFlorian Westphal
When we need to create a new aggregate to enqueue the skb we call kzalloc. If that fails we returned ENOBUFS without freeing the skb. Spotted during code review. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08ip6gre: Allow live link address changeShweta Choudaha
The ip6 GRE tap device should not be forced to down state to change the mac address and should allow live address change for tap device similar to ipv4 gre. Signed-off-by: Shweta Choudaha <schoudah@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08Merge branch 'cls_u32-hwoffload-fixes'David S. Miller
Jakub Kicinski says: ==================== incremental cls_u32 hardware offload fixes These are incremental changes from v1 of cls_u32 fixes. First patch is reposted in its entirety, patch 2 is an incremental change from patch 2 of the original series. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08net: cls_u32: be more strict about skip-sw flag for knodesJakub Kicinski
Return an error if user requested skip-sw and the underlaying hardware cannot handle tc offloads (or offloads are disabled). This patch fixes the knode handling. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08net: cls_u32: catch all hardware offload errorsJakub Kicinski
Errors reported by u32_replace_hw_hnode() were not propagated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-09Merge tag 'drm-vc4-fixes-2016-06-06' of github.com:anholt/linux into drm-fixesDave Airlie
This pull request brings in vblank/pageflip fixes I had hoped to see merged before 4.7rc1, plus two new fixes that have come in since then. * tag 'drm-vc4-fixes-2016-06-06' of github.com:anholt/linux: drm/vc4: Make pageflip completion handling more robust. drm/vc4: Fix ioctl permissions for render nodes. drm/vc4: Return -EBUSY if there's already a pending flip event. drm/vc4: Fix drm_vblank_put/get imbalance in page flip path. drm/vc4: Fix get_vblank_counter with proper no-op for Linux 4.4+
2016-06-09drm/omap: fix unused variable warning in dsi & hdmiTomi Valkeinen
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-06-09Merge branch 'linux-4.7' of git://github.com/skeggsb/linux into drm-fixesDave Airlie
Fixes for two issues reported by KASAN, a display engine hang due to incorrect BIOS table parsing, and incorrect LTC interrupt handling on Maxwell which could lead to a never-ending interrupt storm. * 'linux-4.7' of git://github.com/skeggsb/linux: drm/nouveau/disp/sor/gm107: training pattern registers are like gm200 drm/nouveau/disp/sor/gf119: both links use the same training register drm/nouveau/core: swap the order of imem/fb drm/nouveau/fbcon: fix out-of-bounds memory accesses drm/nouveau/gr/gf100-: update sm error decoding from gk20a nvgpu headers drm/nouveau/ltc/gm107-: fix typo in the address of NV_PLTCG_LTC0_LTS0_INTR drm/nouveau/bios/disp: fix handling of "match any protocol" entries
2016-06-08drm/fsl-dcu: use flat regmap cacheStefan Agner
Using flat regmap cache instead of RB-tree to avoid the following lockdep warning on driver load: WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:2755 lockdep_trace_alloc+0x15c/0x160() DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags)) The RB-tree regmap cache needs to allocate new space on first writes. However, allocations in an atomic context (e.g. when a spinlock is held) are not allowed. The function regmap_write calls map->lock, which acquires a spinlock in the fast_io case. Since the FSL DCU driver uses MMIO, the regmap bus of type regmap_mmio is being used which has fast_io set to true. Use flat regmap cache and specify max register to be large enouth to cover all registers available in LS1021a and Vybrids register space. Signed-off-by: Stefan Agner <stefan@agner.ch> Cc: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2016-06-08Merge branch 'misc-fixes-4.7' of ↵Chris Mason
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.7
2016-06-08Merge branch 'for-chris' of ↵Chris Mason
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.7
2016-06-08platform/x86: Drop duplicate dependencies on X86Jean Delvare
The whole menu depends on X86 so there is no point in repeating this dependency on individual driver entries. Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-06-08thinkpad_acpi: Add support for HKEY version 0x200Dennis Wassenberg
Lenovo Thinkpad devices T460, T460s, T460p, T560, X260 use HKEY version 0x200 without adaptive keyboard. HKEY version 0x200 has method MHKA with one parameter value. Passing parameter value 1 will get hotkey_all_mask (the same like HKEY version 0x100 without parameter). Passing parameter value 2 to MHKA method will retrieve hotkey_all_adaptive_mask. If 0 is returned in that case there is no adaptive keyboard available. Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com> Signed-off-by: Lyude <cpaul@redhat.com> Tested-by: Lyude <cpaul@redhat.com> Tested-by: Marco Trevisan <marco@ubuntu.com> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> [dvhart: Keep MHKA error string on one line in new and existing pr_err calls] Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-06-08ideapad_laptop: Add an event for mic mute hotkeyAlex Hung
Newer ideapads support a new mic hotkey implemented via an ACPI interface. This patch converts the mic mute event to a keycode KEY_MICMUTE. Signed-off-by: Alex Hung <alex.hung@canonical.com> Acked-by: Ike Panhc <ike.pan@canonical.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-06-08ARM: dts: socfpga: Add missing PHY phandleMarek Vasut
Add missing PHY phandle into the DT, otherwise the stmmac code won't detect the PHY correctly anymore. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2016-06-08sfc: report supported link speeds on SFP connectionsBert Kenward
7000-series SFC NICs connected with an SFP+ module currently fail to report any supported link speeds. Reported-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Bert Kenward <bkenward@solarflare.com> Reviewed-by: Jarod Wilson <jarod@redhat.com> Tested-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08net_sched: add missing paddattr descriptionEric Dumazet
"make htmldocs" complains otherwise: .//net/core/gen_stats.c:65: warning: No description found for parameter 'padattr' .//net/core/gen_stats.c:101: warning: No description found for parameter 'padattr' Fixes: 9854518ea04d ("sched: align nlattr properly when needed") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: kbuild test robot <fengguang.wu@intel.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08ipv6: Skip XFRM lookup if dst_entry in socket cache is validJakub Sitnicki
At present we perform an xfrm_lookup() for each UDPv6 message we send. The lookup involves querying the flow cache (flow_cache_lookup) and, in case of a cache miss, creating an XFRM bundle. If we miss the flow cache, we can end up creating a new bundle and deriving the path MTU (xfrm_init_pmtu) from on an already transformed dst_entry, which we pass from the socket cache (sk->sk_dst_cache) down to xfrm_lookup(). This can happen only if we're caching the dst_entry in the socket, that is when we're using a connected UDP socket. To put it another way, the path MTU shrinks each time we miss the flow cache, which later on leads to incorrectly fragmented payload. It can be observed with ESPv6 in transport mode: 1) Set up a transformation and lower the MTU to trigger fragmentation # ip xfrm policy add dir out src ::1 dst ::1 \ tmpl src ::1 dst ::1 proto esp spi 1 # ip xfrm state add src ::1 dst ::1 \ proto esp spi 1 enc 'aes' 0x0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b # ip link set dev lo mtu 1500 2) Monitor the packet flow and set up an UDP sink # tcpdump -ni lo -ttt & # socat udp6-listen:12345,fork /dev/null & 3) Send a datagram that needs fragmentation with a connected socket # perl -e 'print "@" x 1470 | socat - udp6:[::1]:12345 2016/06/07 18:52:52 socat[724] E read(3, 0x555bb3d5ba00, 8192): Protocol error 00:00:00.000000 IP6 ::1 > ::1: frag (0|1448) ESP(spi=0x00000001,seq=0x2), length 1448 00:00:00.000014 IP6 ::1 > ::1: frag (1448|32) 00:00:00.000050 IP6 ::1 > ::1: ESP(spi=0x00000001,seq=0x3), length 1272 (^ ICMPv6 Parameter Problem) 00:00:00.000022 IP6 ::1 > ::1: ESP(spi=0x00000001,seq=0x5), length 136 4) Compare it to a non-connected socket # perl -e 'print "@" x 1500' | socat - udp6-sendto:[::1]:12345 00:00:40.535488 IP6 ::1 > ::1: frag (0|1448) ESP(spi=0x00000001,seq=0x6), length 1448 00:00:00.000010 IP6 ::1 > ::1: frag (1448|64) What happens in step (3) is: 1) when connecting the socket in __ip6_datagram_connect(), we perform an XFRM lookup, miss the flow cache, create an XFRM bundle, and cache the destination, 2) afterwards, when sending the datagram, we perform an XFRM lookup, again, miss the flow cache (due to mismatch of flowi6_iif and flowi6_oif, which is an issue of its own), and recreate an XFRM bundle based on the cached (and already transformed) destination. To prevent the recreation of an XFRM bundle, avoid an XFRM lookup altogether whenever we already have a destination entry cached in the socket. This prevents the path MTU shrinkage and brings us on par with UDPv4. The fix also benefits connected PINGv6 sockets, another user of ip6_sk_dst_lookup_flow(), who also suffer messages being transformed twice. Joint work with Hannes Frederic Sowa. Reported-by: Jan Tluka <jtluka@redhat.com> Signed-off-by: Jakub Sitnicki <jkbs@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08l2tp: fix configuration passed to setup_udp_tunnel_sock()Guillaume Nault
Unused fields of udp_cfg must be all zeros. Otherwise setup_udp_tunnel_sock() fills ->gro_receive and ->gro_complete callbacks with garbage, eventually resulting in panic when used by udp_gro_receive(). [ 72.694123] BUG: unable to handle kernel paging request at ffff880033f87d78 [ 72.695518] IP: [<ffff880033f87d78>] 0xffff880033f87d78 [ 72.696530] PGD 26e2067 PUD 26e3067 PMD 342ed063 PTE 8000000033f87163 [ 72.696530] Oops: 0011 [#1] SMP KASAN [ 72.696530] Modules linked in: l2tp_ppp l2tp_netlink l2tp_core ip6_udp_tunnel udp_tunnel pptp gre pppox ppp_generic slhc crc32c_intel ghash_clmulni_intel jitterentropy_rng sha256_generic hmac drbg ansi_cprng aesni_intel evdev aes_x86_64 ablk_helper cryptd lrw gf128mul glue_helper serio_raw acpi_cpufreq button proc\ essor ext4 crc16 jbd2 mbcache virtio_blk virtio_net virtio_pci virtio_ring virtio [ 72.696530] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.7.0-rc1 #1 [ 72.696530] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014 [ 72.696530] task: ffff880035b59700 ti: ffff880035b70000 task.ti: ffff880035b70000 [ 72.696530] RIP: 0010:[<ffff880033f87d78>] [<ffff880033f87d78>] 0xffff880033f87d78 [ 72.696530] RSP: 0018:ffff880035f87bc0 EFLAGS: 00010246 [ 72.696530] RAX: ffffed000698f996 RBX: ffff88003326b840 RCX: ffffffff814cc823 [ 72.696530] RDX: ffff88003326b840 RSI: ffff880033e48038 RDI: ffff880034c7c780 [ 72.696530] RBP: ffff880035f87c18 R08: 000000000000a506 R09: 0000000000000000 [ 72.696530] R10: ffff880035f87b38 R11: ffff880034b9344d R12: 00000000ebfea715 [ 72.696530] R13: 0000000000000000 R14: ffff880034c7c780 R15: 0000000000000000 [ 72.696530] FS: 0000000000000000(0000) GS:ffff880035f80000(0000) knlGS:0000000000000000 [ 72.696530] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 72.696530] CR2: ffff880033f87d78 CR3: 0000000033c98000 CR4: 00000000000406a0 [ 72.696530] Stack: [ 72.696530] ffffffff814cc834 ffff880034b93468 0000001481416818 ffff88003326b874 [ 72.696530] ffff880034c7ccb0 ffff880033e48038 ffff88003326b840 ffff880034b93462 [ 72.696530] ffff88003326b88a ffff88003326b88c ffff880034b93468 ffff880035f87c70 [ 72.696530] Call Trace: [ 72.696530] <IRQ> [ 72.696530] [<ffffffff814cc834>] ? udp_gro_receive+0x1c6/0x1f9 [ 72.696530] [<ffffffff814ccb1c>] udp4_gro_receive+0x2b5/0x310 [ 72.696530] [<ffffffff814d989b>] inet_gro_receive+0x4a3/0x4cd [ 72.696530] [<ffffffff81431b32>] dev_gro_receive+0x584/0x7a3 [ 72.696530] [<ffffffff810adf7a>] ? __lock_is_held+0x29/0x64 [ 72.696530] [<ffffffff814321f7>] napi_gro_receive+0x124/0x21d [ 72.696530] [<ffffffffa000b145>] virtnet_receive+0x8df/0x8f6 [virtio_net] [ 72.696530] [<ffffffffa000b27e>] virtnet_poll+0x1d/0x8d [virtio_net] [ 72.696530] [<ffffffff81431350>] net_rx_action+0x15b/0x3b9 [ 72.696530] [<ffffffff815893d6>] __do_softirq+0x216/0x546 [ 72.696530] [<ffffffff81062392>] irq_exit+0x49/0xb6 [ 72.696530] [<ffffffff81588e9a>] do_IRQ+0xe2/0xfa [ 72.696530] [<ffffffff81587a49>] common_interrupt+0x89/0x89 [ 72.696530] <EOI> [ 72.696530] [<ffffffff810b05df>] ? trace_hardirqs_on_caller+0x229/0x270 [ 72.696530] [<ffffffff8102b3c7>] ? default_idle+0x1c/0x2d [ 72.696530] [<ffffffff8102b3c5>] ? default_idle+0x1a/0x2d [ 72.696530] [<ffffffff8102bb8c>] arch_cpu_idle+0xa/0xc [ 72.696530] [<ffffffff810a6c39>] default_idle_call+0x1a/0x1c [ 72.696530] [<ffffffff810a6d96>] cpu_startup_entry+0x15b/0x20f [ 72.696530] [<ffffffff81039a81>] start_secondary+0x12c/0x133 [ 72.696530] Code: ff ff ff ff ff ff ff ff ff ff 7f ff ff ff ff ff ff ff 7f 00 7e f8 33 00 88 ff ff 6d 61 58 81 ff ff ff ff 5e de 0a 81 ff ff ff ff <00> 5c e2 34 00 88 ff ff 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 72.696530] RIP [<ffff880033f87d78>] 0xffff880033f87d78 [ 72.696530] RSP <ffff880035f87bc0> [ 72.696530] CR2: ffff880033f87d78 [ 72.696530] ---[ end trace ad7758b9a1dccf99 ]--- [ 72.696530] Kernel panic - not syncing: Fatal exception in interrupt [ 72.696530] Kernel Offset: disabled [ 72.696530] ---[ end Kernel panic - not syncing: Fatal exception in interrupt v2: use empty initialiser instead of "{ NULL }" to avoid relying on first field's type. Fixes: 38fd2af24fcf ("udp: Add socket based GRO and config") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08xen-blkfront: fix resume issues after a migrationBob Liu
After a migrate to another host (which may not have multiqueue support), the number of rings (block hardware queues) may be changed and the ring info structure will also be reallocated. This patch fixes two related bugs: * call blk_mq_update_nr_hw_queues() to make blk-core know the number of hardware queues have been changed. * Don't store rinfo pointer to hctx->driver_data, because rinfo may be reallocated so use hctx->queue_num to get the rinfo structure instead. Signed-off-by: Bob Liu <bob.liu@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2016-06-08xen-blkfront: don't call talk_to_blkback when already connected to blkbackBob Liu
Sometimes blkfront may twice receive blkback_changed() notification (XenbusStateConnected) after migration, which will cause talk_to_blkback() to be called twice too and confuse xen-blkback. The flow is as follow: blkfront blkback blkfront_resume() > talk_to_blkback() > Set blkfront to XenbusStateInitialised front changed() > Connect() > Set blkback to XenbusStateConnected blkback_changed() > Skip talk_to_blkback() because frontstate == XenbusStateInitialised > blkfront_connect() > Set blkfront to XenbusStateConnected ----- And here we get another XenbusStateConnected notification leading to: ----- blkback_changed() > because now frontstate != XenbusStateInitialised talk_to_blkback() is also called again > blkfront state changed from XenbusStateConnected to XenbusStateInitialised (Which is not correct!) front_changed(): > Do nothing because blkback already in XenbusStateConnected Now blkback is in XenbusStateConnected but blkfront is still in XenbusStateInitialised - leading to no disks. Poking of the XenbusStateConnected state is allowed (to deal with block disk change) and has to be dealt with. The most likely cause of this bug are custom udev scripts hooking up the disks and then validating the size. Signed-off-by: Bob Liu <bob.liu@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2016-06-08futex: Calculate the futex key based on a tail page for file-based futexesMel Gorman
Mike Galbraith reported that the LTP test case futex_wake04 was broken by commit 65d8fc777f6d ("futex: Remove requirement for lock_page() in get_futex_key()"). This test case uses futexes backed by hugetlbfs pages and so there is an associated inode with a futex stored on such pages. The problem is that the key is being calculated based on the head page index of the hugetlbfs page and not the tail page. Prior to the optimisation, the page lock was used to stabilise mappings and pin the inode is file-backed which is overkill. If the page was a compound page, the head page was automatically looked up as part of the page lock operation but the tail page index was used to calculate the futex key. After the optimisation, the compound head is looked up early and the page lock is only relied upon to identify truncated pages, special pages or a shmem page moving to swapcache. The head page is looked up because without the page lock, special care has to be taken to pin the inode correctly. However, the tail page is still required to calculate the futex key so this patch records the tail page. On vanilla 4.6, the output of the test case is; futex_wake04 0 TINFO : Hugepagesize 2097152 futex_wake04 1 TFAIL : futex_wake04.c:126: Bug: wait_thread2 did not wake after 30 secs. With the patch applied futex_wake04 0 TINFO : Hugepagesize 2097152 futex_wake04 1 TPASS : Hi hydra, thread2 awake! Fixes: 65d8fc777f6d "futex: Remove requirement for lock_page() in get_futex_key()" Reported-and-tested-by: Mike Galbraith <umgwanakikbuti@gmail.com> Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20160608132522.GM2469@suse.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-06-08cxgb4: Add device id of T540-BT adapterHariprasad Shenai
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08nbd: pass the nbd pointer for flags debugfsJosef Bacik
We were passing in &nbd for the private data in debugfs_create_file() for the flags entry. We expect it to just be nbd, fix this so we get proper output from this debugfs entry. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-08objtool, drm/vmwgfx: Fix "duplicate frame pointer save" warningJosh Poimboeuf
objtool reports the following warnings: drivers/gpu/drm/vmwgfx/vmwgfx_msg.o: warning: objtool: vmw_send_msg()+0x107: duplicate frame pointer save drivers/gpu/drm/vmwgfx/vmwgfx_msg.o: warning: objtool: vmw_host_get_guestinfo()+0x252: duplicate frame pointer save To quote Linus: "The reason is that VMW_PORT_HB_OUT() uses a magic instruction sequence (a "rep outsb") to communicate with the hypervisor (it's a virtual GPU driver for vmware), and %rbp is part of the communication. So the inline asm does a save-and-restore of the frame pointer around the instruction sequence. I actually find the objtool warning to be quite reasonable, so it's not exactly a false positive, since in this case it actually does point out that the frame pointer won't be reliable over that instruction sequence. But in this particular case it just ends up being the wrong thing - the code is what it is, and %rbp just can't have the frame information due to annoying magic calling conventions." Silence the warnings by telling objtool to ignore the two functions which use the VMW_PORT_HB_{IN,OUT} macros. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: DRI <dri-devel@lists.freedesktop.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160526184343.fdtjjjg67smmeekt@treble Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-08drivers: of: Fix of_pci.h header guardRobin Murphy
The compilation of of_pci.c is governed by CONFIG_OF_PCI, but the corresponding declarations in of_pci.h are inconsistently guarded by CONFIG_OF, with the result that if CONFIG_PCI is disabled for an OF platform, the dangling external declarations are still active and the inline stub definitions not. So far this has managed to go unnoticed since it happens that the only references to these functions are from code which itself depends on CONFIG_PCI or CONFIG_OF_PCI. Fix this with the appropriate config guard so that any new callers outside PCI-specific code don't start unexpectedly breaking under certain configs. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-06-08dt-bindings: Add vendor prefix for TechNexionFabio Estevam
TechNexion designs and manufactures embedded computing systems: http://www.technexion.com/ Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-06-08sched/debug: Fix 'schedstats=enable' cmdline optionJosh Poimboeuf
The 'schedstats=enable' option doesn't work, and also produces the following warning during boot: WARNING: CPU: 0 PID: 0 at /home/jpoimboe/git/linux/kernel/jump_label.c:61 static_key_slow_inc+0x8c/0xa0 static_key_slow_inc used before call to jump_label_init Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 4.7.0-rc1+ #25 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.8.1-20150318_183358- 04/01/2014 0000000000000086 3ae3475a4bea95d4 ffffffff81e03da8 ffffffff8143fc83 ffffffff81e03df8 0000000000000000 ffffffff81e03de8 ffffffff810b1ffb 0000003d00000096 ffffffff823514d0 ffff88007ff197c8 0000000000000000 Call Trace: [<ffffffff8143fc83>] dump_stack+0x85/0xc2 [<ffffffff810b1ffb>] __warn+0xcb/0xf0 [<ffffffff810b207f>] warn_slowpath_fmt+0x5f/0x80 [<ffffffff811e9c0c>] static_key_slow_inc+0x8c/0xa0 [<ffffffff810e07c6>] static_key_enable+0x16/0x40 [<ffffffff8216d633>] setup_schedstats+0x29/0x94 [<ffffffff82148a05>] unknown_bootoption+0x89/0x191 [<ffffffff810d8617>] parse_args+0x297/0x4b0 [<ffffffff82148d61>] start_kernel+0x1d8/0x4a9 [<ffffffff8214897c>] ? set_init_arg+0x55/0x55 [<ffffffff82148120>] ? early_idt_handler_array+0x120/0x120 [<ffffffff821482db>] x86_64_start_reservations+0x2f/0x31 [<ffffffff82148427>] x86_64_start_kernel+0x14a/0x16d The problem is that it tries to update the 'sched_schedstats' static key before jump labels have been initialized. Changing jump_label_init() to be called earlier before parse_early_param() wouldn't fix it: it would still fail trying to poke_text() because mm isn't yet initialized. Instead, just create a temporary '__sched_schedstats' variable which can be copied to the static key later during sched_init() after jump labels have been initialized. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: cb2517653fcc ("sched/debug: Make schedstats a runtime tunable that is disabled by default") Link: http://lkml.kernel.org/r/453775fe3433bed65731a583e228ccea806d18cd.1465322027.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-08sched/debug: Fix /proc/sched_debug regressionJosh Poimboeuf
Commit: cb2517653fcc ("sched/debug: Make schedstats a runtime tunable that is disabled by default") ... introduced a bug when CONFIG_SCHEDSTATS is enabled and the runtime tunable is disabled (which is the default). The wait-time, sum-exec, and sum-sleep fields are missing from the /proc/sched_debug file in the runnable_tasks section. Fix it with a new schedstat_val() macro which returns the field value when schedstats is enabled and zero otherwise. The macro works with both SCHEDSTATS and !SCHEDSTATS. I put the macro in stats.h since it might end up being useful in other places. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: cb2517653fcc ("sched/debug: Make schedstats a runtime tunable that is disabled by default") Link: http://lkml.kernel.org/r/bcda7c2790cf2ccbe586a28c02dd7b6fe7749a2b.1464994423.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-08perf/core: Remove a redundant checkAlexander Shishkin
There is no way to end up in _free_event() with event::pmu being NULL. The latter is initialized in event allocation path and remains set forever. In case of allocation failure, the error path doesn't use _free_event(). Having the check, however, suggests that it is possible to have a event::pmu==NULL situation in _free_event() and confuses the robots. This patch gets rid of the check. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: eranian@google.com Cc: vince@deater.net Link: http://lkml.kernel.org/r/1465303455-26032-1-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-08locking/qspinlock: Fix spin_unlock_wait() some morePeter Zijlstra
While this prior commit: 54cf809b9512 ("locking,qspinlock: Fix spin_is_locked() and spin_unlock_wait()") ... fixes spin_is_locked() and spin_unlock_wait() for the usage in ipc/sem and netfilter, it does not in fact work right for the usage in task_work and futex. So while the 2 locks crossed problem: spin_lock(A) spin_lock(B) if (!spin_is_locked(B)) spin_unlock_wait(A) foo() foo(); ... works with the smp_mb() injected by both spin_is_locked() and spin_unlock_wait(), this is not sufficient for: flag = 1; smp_mb(); spin_lock() spin_unlock_wait() if (!flag) // add to lockless list // iterate lockless list ... because in this scenario, the store from spin_lock() can be delayed past the load of flag, uncrossing the variables and loosing the guarantee. This patch reworks spin_is_locked() and spin_unlock_wait() to work in both cases by exploiting the observation that while the lock byte store can be delayed, the contender must have registered itself visibly in other state contained in the word. It also allows for architectures to override both functions, as PPC and ARM64 have an additional issue for which we currently have no generic solution. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Giovanni Gherdovich <ggherdovich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Pan Xinhui <xinhui.pan@linux.vnet.ibm.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Waiman Long <waiman.long@hpe.com> Cc: Will Deacon <will.deacon@arm.com> Cc: stable@vger.kernel.org # v4.2 and later Fixes: 54cf809b9512 ("locking,qspinlock: Fix spin_is_locked() and spin_unlock_wait()") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-08gpio: bcm-kona: fix bcm_kona_gpio_reset() warningsBen Dooks
The bcm_kona_gpio_reset() calls bcm_kona_gpio_write_lock_regs() with what looks like the wrong parameter. The write_lock_regs function takes a pointer to the registers, not the bcm_kona_gpio structure. Fix the warning, and probably bug by changing the function to pass reg_base instead of kona_gpio, fixing the following warning: drivers/gpio/gpio-bcm-kona.c:550:47: warning: incorrect type in argument 1 (different address spaces) expected void [noderef] <asn:2>*reg_base got struct bcm_kona_gpio *kona_gpio warning: incorrect type in argument 1 (different address spaces) expected void [noderef] <asn:2>*reg_base got struct bcm_kona_gpio *kona_gpio Cc: stable@vger.kernel.org Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Acked-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Markus Mayer <mmayer@broadcom.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-08x86/cpu/AMD: Extend X86_FEATURE_TOPOEXT workaround to newer modelsBorislav Petkov
We need to reenable the topology extensions CPUID leafs on newer models too, if BIOS has disabled them, as we rely on them to get proper compute unit topology. Make the printk a once thing, while at it. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rui Huang <ray.huang@amd.com> Cc: Sherry Hurwitz <sherry.hurwitz@amd.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-hwmon@vger.kernel.org Link: http://lkml.kernel.org/r/1464775468-23355-1-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-08gpio: select ANON_INODESLinus Walleij
The build servers found that gpiolib is using ANON_INODES but has forgotten to select it. Fix this. Reported-by: kbuild test robot <fengguang.wu@intel.com> Fixes: 521a2ad6f862 ("gpio: add userspace ABI for GPIO line information") Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-08regulator: qcom_smd: add regulator ops for pm8941 lnldoSrinivas Kandagatla
After "regulator: qcom_smd: add list_voltage callback" patch adding pm8941 lnldo regulators would bug on list_voltages as it is a fixed regulator without any linear range. This patch fixes that issue by adding dedicated ops for pm8941 lnldo without list_voltages callback. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org # v4.6
2016-06-08regulator: qcom_smd: add list_voltage callbackSrinivas Kandagatla
This patch adds support to list_voltage callback, so that consumers like mmc core, can get information of supported voltage range. Without this patch there is no way for mmc core to know this voltage range. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org # v4.6
2016-06-08x86/cpu/intel: Introduce macros for Intel family numbersDave Hansen
Problem: We have a boatload of open-coded family-6 model numbers. Half of them have these model numbers in hex and the other half in decimal. This makes grepping for them tons of fun, if you were to try. Solution: Consolidate all the magic numbers. Put all the definitions in one header. The names here are closely derived from the comments describing the models from arch/x86/events/intel/core.c. We could easily make them shorter by doing things like s/SANDYBRIDGE/SNB/, but they seemed fine even with the longer versions to me. Do not take any of these names too literally, like "DESKTOP" or "MOBILE". These are all colloquial names and not precise descriptions of everywhere a given model will show up. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Dave Hansen <dave@sr71.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Doug Thompson <dougthompson@xmission.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Len Brown <lenb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com> Cc: Souvik Kumar Chakravarty <souvik.k.chakravarty@intel.com> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Vishwanath Somayaji <vishwanath.somayaji@intel.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: jacob.jun.pan@intel.com Cc: linux-acpi@vger.kernel.org Cc: linux-edac@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: platform-driver-x86@vger.kernel.org Link: http://lkml.kernel.org/r/20160603001927.F2A7D828@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-08leds: handle suspend/resume in heartbeat triggerLinus Walleij
The following phenomena was observed: when suspending the system, sometimes the heartbeat LED was left on, glowing and wasting power while the rest of the system is asleep, also disturbing power dissapation measures on the odd suspend cycle when it's left on. Clearly this is not how we want the heartbeat trigger to work: it should turn off and leave the LED off during system suspend. This removes the heartbeat trigger when preparing suspend and restores it during resume. The trigger code will make sure all LEDs are left in OFF state after removing the trigger, and will re-enable the trigger on all LEDs after resuming. Cc: linux-pm@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-06-08leds: core: Fix brightness setting upon hardware blinking enabledTony Makkiel
Commit 76931edd54f8 ("leds: fix brightness changing when software blinking is active") changed the semantics of led_set_brightness() which according to the documentation should disable blinking upon any brightness setting. Moreover it made it different for soft blink case, where it was possible to change blink brightness, and for hardware blink case, where setting any brightness greater than 0 was ignored. While the change itself is against the documentation claims, it was driven also by the fact that timer trigger remained active after turning blinking off. Fixing that would have required major refactoring in the led-core, led-class, and led-triggers because of cyclic dependencies. Finally, it has been decided that allowing for brightness change during blinking is beneficial as it can be accomplished without disturbing blink rhythm. The change in brightness setting semantics will not affect existing LED class drivers that implement blink_set op thanks to the LED_BLINK_SW flag introduced by this patch. The flag state will be from now on checked in led_set_brightness() which will allow to distinguish between software and hardware blink mode. In the latter case the control will be passed directly to the drivers which apply their semantics on brightness set, which is disable the blinking in case of most such drivers. New drivers will apply new semantics and just change the brightness while hardware blinking is on, if possible. The issue was smuggled by subsequent LED core improvements, which modified the code that originally introduced the problem. Fixes: f1e80c07416a ("leds: core: Add two new LED_BLINK_ flags") Signed-off-by: Tony Makkiel <tony.makkiel@daqri.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-06-08arm64: mm: always take dirty state from new pte in ptep_set_access_flagsWill Deacon
Commit 66dbd6e61a52 ("arm64: Implement ptep_set_access_flags() for hardware AF/DBM") ensured that pte flags are updated atomically in the face of potential concurrent, hardware-assisted updates. However, Alex reports that: | This patch breaks swapping for me. | In the broken case, you'll see either systemd cpu time spike (because | it's stuck in a page fault loop) or the system hang (because the | application owning the screen is stuck in a page fault loop). It turns out that this is because the 'dirty' argument to ptep_set_access_flags is always 0 for read faults, and so we can't use it to set PTE_RDONLY. The failing sequence is: 1. We put down a PTE_WRITE | PTE_DIRTY | PTE_AF pte 2. Memory pressure -> pte_mkold(pte) -> clear PTE_AF 3. A read faults due to the missing access flag 4. ptep_set_access_flags is called with dirty = 0, due to the read fault 5. pte is then made PTE_WRITE | PTE_DIRTY | PTE_AF | PTE_RDONLY (!) 6. A write faults, but pte_write is true so we get stuck The solution is to check the new page table entry (as would be done by the generic, non-atomic definition of ptep_set_access_flags that just calls set_pte_at) to establish the dirty state. Cc: <stable@vger.kernel.org> # 4.3+ Fixes: 66dbd6e61a52 ("arm64: Implement ptep_set_access_flags() for hardware AF/DBM") Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Alexander Graf <agraf@suse.de> Tested-by: Alexander Graf <agraf@suse.de> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-06-08gpio: include <linux/io-mapping.h> in gpiolib-ofLinus Walleij
When enabling the gpiolib for all archs a build robot came up with this: All errors (new ones prefixed by >>): drivers/gpio/gpiolib-of.c: In function 'of_mm_gpiochip_add_data': >> drivers/gpio/gpiolib-of.c:317:2: error: implicit declaration of function 'iounmap' [-Werror=implicit-function-declaration] iounmap(mm_gc->regs); ^~~~~~~ cc1: some warnings being treated as errors Fix this by including <linux/io-mapping.h> explicitly. Fixes: 296ad4acb8ef ("gpio: remove deps on ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB") Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-08gpiolib: Fix unaligned used of reference countersRicardo Ribalda Delgado
gpiolib relies on the reference counters to clean up the gpio_device structure. Although the number of get/put is properly aligned on gpiolib.c itself, it does not take into consideration how the referece counters are affected by other external functions such as cdev_add and device_add. Because of this, after the last call to put_device, the reference counter has a value of +3, therefore never calling gpiodevice_release. Due to the fact that some of the device has already been cleaned on gpiochip_remove, the library will end up OOPsing the kernel (e.g. a call to of_gpiochip_find_and_xlate). Cc: stable@vger.kernel.org Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-08gpiolib: Fix NULL pointer deferenceRicardo Ribalda Delgado
Under some circumstances, a gpiochip might be half cleaned from the gpio_device list. This patch makes sure that the chip pointer is still valid, before calling the match function. [ 104.088296] BUG: unable to handle kernel NULL pointer dereference at 0000000000000090 [ 104.089772] IP: [<ffffffff813d2045>] of_gpiochip_find_and_xlate+0x15/0x80 [ 104.128273] Call Trace: [ 104.129802] [<ffffffff813d2030>] ? of_parse_own_gpio+0x1f0/0x1f0 [ 104.131353] [<ffffffff813cd910>] gpiochip_find+0x60/0x90 [ 104.132868] [<ffffffff813d21ba>] of_get_named_gpiod_flags+0x9a/0x120 ... [ 104.141586] [<ffffffff8163d12b>] gpio_led_probe+0x11b/0x360 Cc: stable@vger.kernel.org Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-08gpio: zynq: initialize clock even without CONFIG_PMHelmut Grohne
When the PM initialization was moved in the commit referenced below, the code enabling the clock was removed from the probe function. On CONFIG_PM=y kernels, this is not a problem as the pm resume hook enables the clock, but when power management is disabled, all those pm_* functions are noops and the clock is never enabled resulting in a dysfunctional gpio controller. Put the clock initialization back to support CONFIG_PM=n. Cc: stable@vger.kernel.org Signed-off-by: Helmut Grohne <h.grohne@intenta.de> Fixes: 3773c195d387 ("gpio: zynq: Do PM initialization earlier to support gpio hogs") Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-08gpio: 104-dio-48e: Fix control port offset computation off-by-one errorWilliam Breathitt Gray
There are only two control ports, each controlling three distinct I/O ports. To compute the control port address offset for a respective I/O port, the I/O port address offset should be divided by 3; dividing by 2 may result in not only the wrong address offset but possibly also an out-of-bounds array memory access for a non-existent third control port. Fixes: 1b06d64f7374 ("gpio: Add GPIO support for the ACCES 104-DIO-48E") Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-08net-sysfs: fix missing <linux/of_net.h>Ben Dooks
The of_find_net_device_by_node() function is defined in <linux/of_net.h> but not included in the .c file that implements it. Fix the following warning by including the header: net/core/net-sysfs.c:1494:19: warning: symbol 'of_find_net_device_by_node' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08bridge: Don't insert unnecessary local fdb entry on changing mac addressToshiaki Makita
The missing br_vlan_should_use() test caused creation of an unneeded local fdb entry on changing mac address of a bridge device when there is a vlan which is configured on a bridge port but not on the bridge device. Fixes: 2594e9064a57 ("bridge: vlan: add per-vlan struct and move to rhashtables") Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07Merge tag 'iio-fixes-for-4.7a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First round of iio fixes for the 4.7 cycle. A slightly bumper set due to travel delaying the pull request and a fair few issues with the recent merge window patches. Patches all over the place. The st-sensors one is probably the most involved, but definitly solves the issues seen. Note there are some other issues around that handler (and the fact that a lot of boards tie a level interrupt chip to an edge interrupt only irq chip). These are not regressions however, so will turn up the slow route. * core - iio_trigger_attach_pollfunc had some really badly wrong error handling. Another nasty triggered whilst chasing down issues with the st sensors rework below. * ad5592r - fix an off by one error when allocating channels. * am2315 - a stray mutex unlock before we ever take the lock. * apds9960 - missing a parent in the driver model (which should be the i2c device). Result is it doesn't turn up under /sys/bus/i2c/devices which some userspace code uses for repeatable device identification. * as3935 - ABI usage bug which meant a processed value was reported as raw. Now reporting scale as well to ensure userspace has the info it needs. - Don't return processed value via the buffer - it doesn't conform to the ABI and will overflow in some cases. - Fix a wrongly sized buffer which would overflow trashing part of the stack. Also move it onto the heap as part of the fix. * bh1780 - a missing return after write in debugfs lead to an incorrect read and a null pointer dereference. - dereferencing the wrong pointer in suspend and resume leading to unpredictable results. - assign a static name to avoid accidentally ending up with no name if loaded via device tree. * bmi160 - output data rate for the accelerometer was incorrectly reported. Fix it. - writing the output data rate was also wrong due to reverse parameters. * bmp280 - error message for wrong chip ID gave the wrong expected value. * hdc100x - mask for writing the integration time was wrong allowin g us to get 'stuck' in a particular value with no way back. - temperature reported in celsius rather than millicelsius as per the ABI. - Get rid of some incorrect data shifting which lead to readings being rather incorrect. * max44000 - drop scale attribute for proximity as it is an unscaled value (depends on what is in range rather than anything knowable at the detector). * st-pressure - ABI compliance fixes - units were wrong. * st-sensors - We introduced some nasty issues with the recent switch over to a a somewhat threaded handler in that we broke using a software trigger with these devices. Now do it properly. It's a larger patch than ideal for a fix, but the logic is straight forward. - Make sure the trigger is initialized before requesting the interrupt. This matters now the interrupt can be shared. Before it was ugly and wrong but short of flakey hardware could not be triggered. - Hammer down the dataready pin at boot - otherwise with really unlucky timing things could get interestingly wedged requiring a hard power down of the chip.
2016-06-07usb: echi-hcd: Add ehci_setup check before echi_shutdownSrinivas Kandagatla
This patch protects system from crashing at shutdown in cases where usb host is not added yet from OTG controller driver. As ehci_setup() not done yet, so stop accessing registers or variables initialized as part of ehci_setup(). The use case is simple, for boards like DB410c where the usb host or device functionality is decided based on the micro-usb cable presence. If the board boots up with micro-usb connected, the OTG driver like echi-msm would not add the usb host by default. However a system shutdown would go and access registers and uninitialized variables, resulting in below crash. Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = ffffffc034581000 [00000008] *pgd=0000000000000000, *pud=0000000000000000 CPU: 2 PID: 1957 Comm: reboot Not tainted 4.6.0+ #99 task: ffffffc034bc0000 ti: ffffffc0345cc000 task.ti: ffffffc0345cc000 PC is at ehci_halt+0x54/0x108 LR is at ehci_halt+0x38/0x108 pc : [<ffffff800869837c>] lr : [<ffffff8008698360>] pstate: a00001c5 sp : ffffffc0345cfc60 x29: ffffffc0345cfc60 x28: ffffffc0345cc000 x27: ffffff8008a4d000 x26: 000000000000008e x25: ffffff8008d86cb0 x24: ffffff800908b040 x23: ffffffc036068870 x22: ffffff8009d0a000 x21: ffffffc03512a410 x20: ffffffc03512a410 x19: ffffffc03512a338 x18: 00000000000065ba x17: ffffff8009b16b80 x16: 0000000000000003 x15: 00000000000065b9 x14: 00000000000065b6 x13: 0000000000000000 x12: 0000000000000000 x11: 000000000000003d x10: ffffffc0345cf9e0 x9 : 0000000000000001 x8 : ffffffc0345cc000 x7 : ffffff8008698360 x6 : 0000000000000000 x5 : 0000000000000080 x4 : 0000000000000001 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000008 x0 : ffffffc034bc0000 Process reboot (pid: 1957, stack limit = 0xffffffc0345cc020) Stack: (0xffffffc0345cfc60 to 0xffffffc0345d0000) fc60: ffffffc0345cfc90 ffffff8008698448 ffffffc03512a338 ffffffc03512a338 fc80: ffffffc03512a410 ffffff8008a3bbfc ffffffc0345cfcc0 ffffff8008698548 fca0: ffffffc03512a338 ffffffc03512a000 ffffffc03512a410 ffffff8009d0a000 fcc0: ffffffc0345cfcf0 ffffff800865d2bc ffffffc036068828 ffffffc036068810 fce0: ffffffc036003810 ffffff800853f43c ffffffc0345cfd00 ffffff800854338c fd00: ffffffc0345cfd10 ffffff800853f45c ffffffc0345cfd60 ffffff80080e0f48 fd20: 0000000000000000 0000000001234567 ffffff8008f8c000 ffffff8008f8c060 fd40: 0000000000000000 0000000000000015 0000000000000120 ffffff80080e0f30 fd60: ffffffc0345cfd70 ffffff80080e1020 ffffffc0345cfd90 ffffff80080e12fc fd80: 0000000000000000 0000000001234567 0000000000000000 ffffff8008085e70 fda0: 0000000000000000 0000005592905000 ffffffffffffffff 0000007f79daf1cc fdc0: 0000000000000000 0000000000000000 0000007ffcbb1198 000000000000000a fde0: 00000055928d3f58 0000000000000001 ffffffc034900000 00000000fffffffe fe00: ffffffc034900000 0000007f79da902c ffffffc0345cfe40 ffffff800820af38 fe20: 0000000000000000 0000007ffcbb1078 ffffffffffffffff ffffff80081e9b38 fe40: ffffffc0345cfe60 ffffff80081eb410 ffffffc0345cfe60 ffffff80081eb444 fe60: ffffffc0345cfec0 ffffff80081ec4f4 0000000000000000 0000007ffcbb1078 fe80: ffffffffffffffff 0000000000000015 ffffffc0345cfec0 0000007ffcbb1078 fea0: 0000000000000002 000000000000000a ffffffffffffffff 0000000000000000 fec0: 0000000000000000 ffffff8008085e70 fffffffffee1dead 0000000028121969 fee0: 0000000001234567 0000000000000000 ffffffffffffffff 8080800000800000 ff00: 0000800000808080 0000007ffcbb10f0 000000000000008e fefeff54918cb8c7 ff20: 7f7f7f7fffffffff 0101010101010101 0000000000000010 0000000000000000 ff40: 0000000000000000 0000007f79e33588 0000005592905eb8 0000007f79daf1b0 ff60: 0000007ffcbb1340 0000005592906000 0000005592905000 0000005592906000 ff80: 0000005592907000 0000000000000002 0000007ffcbb1d98 0000005592906000 ffa0: 00000055928d2000 0000000000000000 0000000000000000 0000007ffcbb1aa0 ffc0: 00000055928b819c 0000007ffcbb1aa0 0000007f79daf1cc 0000000000000000 ffe0: fffffffffee1dead 000000000000008e 05ef555057155555 d555544d55d775d3 Call trace: Exception stack(0xffffffc0345cfaa0 to 0xffffffc0345cfbc0) Set corner to 6 faa0: ffffffc03512a338 ffffffc03512a410 ffffffc0345cfc60 ffffff800869837c fac0: ffffff8008114210 0000000100000001 ffffff8009ce1b20 ffffff8009ce5f20 fae0: ffffffc0345cfb80 ffffff80081145a8 ffffffc0345cfc10 ffffff800810b924 fb00: ffffffc0345cc000 00000000000001c0 ffffffc03512a410 ffffff8009d0a000 fb20: ffffffc036068870 ffffff800908b040 ffffff8008d86cb0 000000000000008e fb40: ffffffc034bc0000 0000000000000008 0000000000000000 0000000000000000 fb60: 0000000000000001 0000000000000080 0000000000000000 ffffff8008698360 fb80: ffffffc0345cc000 0000000000000001 ffffffc0345cf9e0 000000000000003d fba0: 0000000000000000 0000000000000000 00000000000065b6 00000000000065b9 [<ffffff800869837c>] ehci_halt+0x54/0x108 [<ffffff8008698448>] ehci_silence_controller+0x18/0xcc [<ffffff8008698548>] ehci_shutdown+0x4c/0x64 [<ffffff800865d2bc>] usb_hcd_platform_shutdown+0x1c/0x24 [<ffffff800854338c>] platform_drv_shutdown+0x20/0x28 [<ffffff800853f45c>] device_shutdown+0xf4/0x1b0 [<ffffff80080e0f48>] kernel_restart_prepare+0x34/0x3c [<ffffff80080e1020>] kernel_restart+0x14/0x74 [<ffffff80080e12fc>] SyS_reboot+0x110/0x21c [<ffffff8008085e70>] el0_svc_naked+0x24/0x28 Code: 53001c42 350000a2 d5033e9f 91002021 (b9000022) Fixes 4bb3cad7125b ("usb: host: ehci-msm: Register usb shutdown function") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Pramod Gurav <pramod.gurav@linaro.org> Tested-by: Andy Gross <andy.gross@linaro.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-11 19:05:36 +0000