summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-07-28net: bridge: switchdev: replay the entire FDB for each portVladimir Oltean
Currently when a switchdev port joins a bridge, we replay all FDB entries pointing towards that port or towards the bridge. However, this is insufficient in certain situations: (a) DSA, through its assisted_learning_on_cpu_port logic, snoops dynamically learned FDB entries on foreign interfaces. These are FDB entries that are pointing neither towards the newly joined switchdev port, nor towards the bridge. So these addresses would be missed when joining a bridge where a foreign interface has already learned some addresses, and they would also linger on if the DSA port leaves the bridge before the foreign interface forgets them. None of this happens if we replay the entire FDB when the port joins. (b) There is a desire to treat local FDB entries on a port (i.e. the port's termination MAC address) identically to FDB entries pointing towards the bridge itself. More details on the reason behind this in the next patch. The point is that this cannot be done given the current structure of br_fdb_replay() in this situation: ip link set swp0 master br0 # br0 inherits its MAC address from swp0 ip link set swp1 master br0 What is desirable is that when swp1 joins the bridge, br_fdb_replay() also notifies swp1 of br0's MAC address, but this won't in fact happen because the MAC address of br0 does not have fdb->dst == NULL (it doesn't point towards the bridge), but it has fdb->dst == swp0. So our current logic makes it impossible for that address to be replayed. But if we dump the entire FDB instead of just the entries with fdb->dst == swp1 and fdb->dst == NULL, then the inherited MAC address of br0 will be replayed too, which is what we need. A natural question arises: say there is an FDB entry to be replayed, like a MAC address dynamically learned on a foreign interface that belongs to a bridge where no switchdev port has joined yet. If 10 switchdev ports belonging to the same driver join this bridge, one by one, won't every port get notified 10 times of the foreign FDB entry, amounting to a total of 100 notifications for this FDB entry in the switchdev driver? Well, yes, but this is where the "void *ctx" argument for br_fdb_replay is useful: every port of the switchdev driver is notified whenever any other port requests an FDB replay, but because the replay was initiated by a different port, its context is different from the initiating port's context, so it ignores those replays. So the foreign FDB entry will be installed only 10 times, once per port. This is done so that the following 4 code paths are always well balanced: (a) addition of foreign FDB entry is replayed when port joins bridge (b) deletion of foreign FDB entry is replayed when port leaves bridge (c) addition of foreign FDB entry is notified to all ports currently in bridge (c) deletion of foreign FDB entry is notified to all ports currently in bridge Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28Merge branch 'bnxt_en-ptp'David S. Miller
Michael Chan says: ==================== bnxt_en: PTP enhancements This series adds two PTP enhancements. This first one is to register the PHC during probe time and keep it registered whether it is in ifup or ifdown state. It will get unregistered and possibly reregistered if the firmware PTP capability changes after firmware reset. The second one is to add the 1PPS (one pulse per second) feature to support input/output of the 1PPS signal. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28bnxt_en: Log if an invalid signal detected on TSIO pinPavan Chebbi
FW can report to driver via ASYNC event if it encountered an invalid signal on any TSIO PIN. Driver will log this event for the user to take corrective action. Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Arvind Susarla <arvind.susarla@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28bnxt_en: Event handler for PPS eventsPavan Chebbi
Once the PPS pins are configured, the FW can report PPS values using ASYNC event. This patch adds the ASYNC event handler and subsequent reporting of the events to kernel. Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28bnxt_en: 1PPS functions to configure TSIO pinsPavan Chebbi
Application will send ioctls to set/clear PPS pin functions based on user input. This patch implements the driver callbacks that will configure the TSIO pins using firmware commands. After firmware reset, the TSIO pins will be reconfigured again. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28bnxt_en: 1PPS support for 5750X family chipsPavan Chebbi
1PPS (One Pulse Per Second) is a signal generated either by the NIC PHC or an external timing source. Integrating the support to configure and use 1PPS using the TSIO pins along with PTP timestamps will add Grand Master capability to the 5750X family chipsets. This patch initializes the driver data structures and registers the 1PPS with kernel, based on the TSIO pins' capability in the hardware. This will create a /dev/ppsX device which applications can use to receive PPS events. Later patches will define functions to configure and use the pins. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28bnxt_en: Do not read the PTP PHC during chip resetMichael Chan
During error recovery or hot firmware upgrade, the chip may be under reset and the PHC register read cycles may cause completion timeouts. Check that the chip is not under reset condition before proceeding to read the PHC by checking the flag BNXT_STATE_IN_FW_RESET. We also need to take the ptp_lock before we set this flag to prevent race conditions. We need this logic because the PHC now will stay registered after bnxt_close(). Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28bnxt_en: Move bnxt_ptp_init() from bnxt_open() back to bnxt_init_one()Michael Chan
It was pointed out by Richard Cochran that registering the PHC during probe is better than during ifup, so move bnxt_ptp_init() back to bnxt_init_one(). In order to work correctly after firmware reset which may result in PTP config. changes, we modify bnxt_ptp_init() to return if the PHC has been registered earlier. If PTP is no longer supported by the new firmware, we will unregister the PHC and clean up. This partially reverts: d7859afb6880 ("bnxt_en: Move bnxt_ptp_init() to bnxt_open()") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28Merge tag 'fixes_for_v5.14-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull ext2 and reiserfs fixes from Jan Kara: "A fix for the ext2 conversion to kmap_local() and two reiserfs hardening fixes" * tag 'fixes_for_v5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: reiserfs: check directory items on read from disk fs/ext2: Avoid page_address on pages returned by ext2_get_page reiserfs: add check for root_inode in reiserfs_fill_super
2021-07-28Merge tag 'platform-drivers-x86-v5.14-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "A set of bug-fixes and new hardware ids. Highlights: - amd-pmc fixes - think-lmi fixes - various new hardware-ids" * tag 'platform-drivers-x86-v5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: gigabyte-wmi: add support for B550 Aorus Elite V2 platform/x86: intel-hid: add Alder Lake ACPI device ID platform/x86: think-lmi: Fix possible mem-leaks on tlmi_analyze() error-exit platform/x86: think-lmi: Split kobject_init() and kobject_add() calls platform/x86: think-lmi: Move pending_reboot_attr to the attributes sysfs dir platform/x86: amd-pmc: Fix undefined reference to __udivdi3 platform/x86: amd-pmc: Fix missing unlock on error in amd_pmc_send_cmd() platform/x86: wireless-hotkey: remove hardcoded "hp" from the error message platform/x86: amd-pmc: Use return code on suspend platform/x86: amd-pmc: Add new acpi id for future PMC controllers platform/x86: amd-pmc: Add support for ACPI ID AMDI0006 platform/x86: amd-pmc: Add support for logging s0ix counters platform/x86: amd-pmc: Add support for logging SMU metrics platform/x86: amd-pmc: call dump registers only once platform/x86: amd-pmc: Fix SMU firmware reporting mechanism platform/x86: amd-pmc: Fix command completion code platform/x86: think-lmi: Add pending_reboot support
2021-07-28dmaengine: idxd: Change license on idxd.h to LGPLTony Luck
This file was given GPL-2.0 license. But LGPL-2.1 makes more sense as it needs to be used by libraries outside of the kernel source tree. Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-28af_unix: fix garbage collect vs MSG_PEEKMiklos Szeredi
unix_gc() assumes that candidate sockets can never gain an external reference (i.e. be installed into an fd) while the unix_gc_lock is held. Except for MSG_PEEK this is guaranteed by modifying inflight count under the unix_gc_lock. MSG_PEEK does not touch any variable protected by unix_gc_lock (file count is not), yet it needs to be serialized with garbage collection. Do this by locking/unlocking unix_gc_lock: 1) increment file count 2) lock/unlock barrier to make sure incremented file count is visible to garbage collection 3) install file into fd This is a lock barrier (unlike smp_mb()) that ensures that garbage collection is run completely before or completely after the barrier. Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-28btrfs: fix rw device counting in __btrfs_free_extra_devidsDesmond Cheong Zhi Xi
When removing a writeable device in __btrfs_free_extra_devids, the rw device count should be decremented. This error was caught by Syzbot which reported a warning in close_fs_devices: WARNING: CPU: 1 PID: 9355 at fs/btrfs/volumes.c:1168 close_fs_devices+0x763/0x880 fs/btrfs/volumes.c:1168 Modules linked in: CPU: 0 PID: 9355 Comm: syz-executor552 Not tainted 5.13.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:close_fs_devices+0x763/0x880 fs/btrfs/volumes.c:1168 RSP: 0018:ffffc9000333f2f0 EFLAGS: 00010293 RAX: ffffffff8365f5c3 RBX: 0000000000000001 RCX: ffff888029afd4c0 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000 RBP: ffff88802846f508 R08: ffffffff8365f525 R09: ffffed100337d128 R10: ffffed100337d128 R11: 0000000000000000 R12: dffffc0000000000 R13: ffff888019be8868 R14: 1ffff1100337d10d R15: 1ffff1100337d10a FS: 00007f6f53828700(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000047c410 CR3: 00000000302a6000 CR4: 00000000001506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: btrfs_close_devices+0xc9/0x450 fs/btrfs/volumes.c:1180 open_ctree+0x8e1/0x3968 fs/btrfs/disk-io.c:3693 btrfs_fill_super fs/btrfs/super.c:1382 [inline] btrfs_mount_root+0xac5/0xc60 fs/btrfs/super.c:1749 legacy_get_tree+0xea/0x180 fs/fs_context.c:592 vfs_get_tree+0x86/0x270 fs/super.c:1498 fc_mount fs/namespace.c:993 [inline] vfs_kern_mount+0xc9/0x160 fs/namespace.c:1023 btrfs_mount+0x3d3/0xb50 fs/btrfs/super.c:1809 legacy_get_tree+0xea/0x180 fs/fs_context.c:592 vfs_get_tree+0x86/0x270 fs/super.c:1498 do_new_mount fs/namespace.c:2905 [inline] path_mount+0x196f/0x2be0 fs/namespace.c:3235 do_mount fs/namespace.c:3248 [inline] __do_sys_mount fs/namespace.c:3456 [inline] __se_sys_mount+0x2f9/0x3b0 fs/namespace.c:3433 do_syscall_64+0x3f/0xb0 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae Because fs_devices->rw_devices was not 0 after closing all devices. Here is the call trace that was observed: btrfs_mount_root(): btrfs_scan_one_device(): device_list_add(); <---------------- device added btrfs_open_devices(): open_fs_devices(): btrfs_open_one_device(); <-------- writable device opened, rw device count ++ btrfs_fill_super(): open_ctree(): btrfs_free_extra_devids(): __btrfs_free_extra_devids(); <--- writable device removed, rw device count not decremented fail_tree_roots: btrfs_close_devices(): close_fs_devices(); <------- rw device count off by 1 As a note, prior to commit cf89af146b7e ("btrfs: dev-replace: fail mount if we don't have replace item with target device"), rw_devices was decremented on removing a writable device in __btrfs_free_extra_devids only if the BTRFS_DEV_STATE_REPLACE_TGT bit was not set for the device. However, this check does not need to be reinstated as it is now redundant and incorrect. In __btrfs_free_extra_devids, we skip removing the device if it is the target for replacement. This is done by checking whether device->devid == BTRFS_DEV_REPLACE_DEVID. Since BTRFS_DEV_STATE_REPLACE_TGT is set only on the device with devid BTRFS_DEV_REPLACE_DEVID, no devices should have the BTRFS_DEV_STATE_REPLACE_TGT bit set after the check, and so it's redundant to test for that bit. Additionally, following commit 82372bc816d7 ("Btrfs: make the logic of source device removing more clear"), rw_devices is incremented whenever a writeable device is added to the alloc list (including the target device in btrfs_dev_replace_finishing), so all removals of writable devices from the alloc list should also be accompanied by a decrement to rw_devices. Reported-by: syzbot+a70e2ad0879f160b9217@syzkaller.appspotmail.com Fixes: cf89af146b7e ("btrfs: dev-replace: fail mount if we don't have replace item with target device") CC: stable@vger.kernel.org # 5.10+ Tested-by: syzbot+a70e2ad0879f160b9217@syzkaller.appspotmail.com Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-07-28btrfs: fix lost inode on log replay after mix of fsync, rename and inode ↵Filipe Manana
eviction When checking if we need to log the new name of a renamed inode, we are checking if the inode and its parent inode have been logged before, and if not we don't log the new name. The check however is buggy, as it directly compares the logged_trans field of the inodes versus the ID of the current transaction. The problem is that logged_trans is a transient field, only stored in memory and never persisted in the inode item, so if an inode was logged before, evicted and reloaded, its logged_trans field is set to a value of 0, meaning the check will return false and the new name of the renamed inode is not logged. If the old parent directory was previously fsynced and we deleted the logged directory entries corresponding to the old name, we end up with a log that when replayed will delete the renamed inode. The following example triggers the problem: $ mkfs.btrfs -f /dev/sdc $ mount /dev/sdc /mnt $ mkdir /mnt/A $ mkdir /mnt/B $ echo -n "hello world" > /mnt/A/foo $ sync # Add some new file to A and fsync directory A. $ touch /mnt/A/bar $ xfs_io -c "fsync" /mnt/A # Now trigger inode eviction. We are only interested in triggering # eviction for the inode of directory A. $ echo 2 > /proc/sys/vm/drop_caches # Move foo from directory A to directory B. # This deletes the directory entries for foo in A from the log, and # does not add the new name for foo in directory B to the log, because # logged_trans of A is 0, which is less than the current transaction ID. $ mv /mnt/A/foo /mnt/B/foo # Now make an fsync to anything except A, B or any file inside them, # like for example create a file at the root directory and fsync this # new file. This syncs the log that contains all the changes done by # previous rename operation. $ touch /mnt/baz $ xfs_io -c "fsync" /mnt/baz <power fail> # Mount the filesystem and replay the log. $ mount /dev/sdc /mnt # Check the filesystem content. $ ls -1R /mnt /mnt/: A B baz /mnt/A: bar /mnt/B: $ # File foo is gone, it's neither in A/ nor in B/. Fix this by using the inode_logged() helper at btrfs_log_new_name(), which safely checks if an inode was logged before in the current transaction. A test case for fstests will follow soon. CC: stable@vger.kernel.org # 4.14+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-07-28btrfs: mark compressed range uptodate only if all bio succeedGoldwyn Rodrigues
In compression write endio sequence, the range which the compressed_bio writes is marked as uptodate if the last bio of the compressed (sub)bios is completed successfully. There could be previous bio which may have failed which is recorded in cb->errors. Set the writeback range as uptodate only if cb->errors is zero, as opposed to checking only the last bio's status. Backporting notes: in all versions up to 4.4 the last argument is always replaced by "!cb->errors". CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-07-28ACPI: DPTF: Fix reading of attributesSrinivas Pandruvada
The current assumption that methods to read PCH FIVR attributes will return integer, is not correct. There is no good way to return integer as negative numbers are also valid. These read methods return a package of integers. The first integer returns status, which is 0 on success and any other value for failure. When the returned status is zero, then the second integer returns the actual value. This change fixes this issue by replacing acpi_evaluate_integer() with acpi_evaluate_object() and use acpi_extract_package() to extract results. Fixes: 2ce6324eadb01 ("ACPI: DPTF: Add PCH FIVR participant driver") Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: 5.10+ <stable@vger.kernel.org> # 5.10+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-07-28Revert "ACPI: resources: Add checks for ACPI IRQ override"Hui Wang
The commit 0ec4e55e9f57 ("ACPI: resources: Add checks for ACPI IRQ override") introduces regression on some platforms, at least it makes the UART can't get correct irq setting on two different platforms, and it makes the kernel can't bootup on these two platforms. This reverts commit 0ec4e55e9f571f08970ed115ec0addc691eda613. Regression-discuss: https://bugzilla.kernel.org/show_bug.cgi?id=213031 Reported-by: PGNd <pgnet.dev@gmail.com> Cc: 5.4+ <stable@vger.kernel.org> # 5.4+ Signed-off-by: Hui Wang <hui.wang@canonical.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-07-28io_uring: fix poll requests leaking second poll entriesHao Xu
For pure poll requests, it doesn't remove the second poll wait entry when it's done, neither after vfs_poll() or in the poll completion handler. We should remove the second poll wait entry. And we use io_poll_remove_double() rather than io_poll_remove_waitqs() since the latter has some redundant logic. Fixes: 88e41cf928a6 ("io_uring: add multishot mode for IORING_OP_POLL_ADD") Cc: stable@vger.kernel.org # 5.13+ Signed-off-by: Hao Xu <haoxu@linux.alibaba.com> Link: https://lore.kernel.org/r/20210728030322.12307-1-haoxu@linux.alibaba.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-07-28io_uring: don't block level reissue off completion pathJens Axboe
Some setups, like SCSI, can throw spurious -EAGAIN off the softirq completion path. Normally we expect this to happen inline as part of submission, but apparently SCSI has a weird corner case where it can happen as part of normal completions. This should be solved by having the -EAGAIN bubble back up the stack as part of submission, but previous attempts at this failed and we're not just quite there yet. Instead we currently use REQ_F_REISSUE to handle this case. For now, catch it in io_rw_should_reissue() and prevent a reissue from a bogus path. Cc: stable@vger.kernel.org Reported-by: Fabian Ebner <f.ebner@proxmox.com> Tested-by: Fabian Ebner <f.ebner@proxmox.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-07-28sis900: Fix missing pci_disable_device() in probe and removeWang Hai
Replace pci_enable_device() with pcim_enable_device(), pci_disable_device() and pci_release_regions() will be called in release automatically. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28Merge branch 'fec-next'David S. Miller
Joakim Zhang says: ==================== net: fec: add support for i.MX8MQ and i.MX8QM This patch set adds supports for i.MX8MQ and i.MX8QM, both of them extend new features. ChangeLogs: V1->V2: * rebase on schema binding, and update dts compatible string. * use generic ethernet controller property for MAC internal RGMII clock delay rx-internal-delay-ps and tx-internal-delay-ps ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28arm64: dts: imx8qxp: add "fsl,imx8qm-fec" compatible string for FECJoakim Zhang
Add "fsl,imx8qm-fec" compatible string for FEC to support new feature (RGMII delayed clock). Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28arm64: dts: imx8m: add "fsl,imx8mq-fec" compatible string for FECJoakim Zhang
Add "fsl,imx8mq-fec" compatible string for FEC to support new feature (IEEE 802.3az EEE standard). Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28net: fec: add MAC internal delayed clock feature supportFugang Duan
i.MX8QM ENET IP version support timing specification that MAC integrate clock delay in RGMII mode, the delayed TXC/RXC as an alternative option to work well with various PHYs. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28net: fec: add eee mode tx lpi supportFugang Duan
The i.MX8MQ ENET version support IEEE802.3az eee mode, add eee mode tx lpi enable to support ethtool interface. usage: 1. set sleep and wake timer to 5ms: ethtool --set-eee eth0 eee on tx-lpi on tx-timer 5000 2. check the eee mode: ~# ethtool --show-eee eth0 EEE Settings for eth0: EEE status: enabled - active Tx LPI: 5000 (us) Supported EEE link modes: 100baseT/Full 1000baseT/Full Advertised EEE link modes: 100baseT/Full 1000baseT/Full Link partner advertised EEE link modes: 100baseT/Full Note: For realtime case and IEEE1588 ptp case, it should disable EEE mode. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28net: fec: add imx8mq and imx8qm new versions supportFugang Duan
The ENET of imx8mq and imx8qm are basically the same as imx6sx, but they have new features support based on imx6sx, like: - imx8mq: supports IEEE 802.3az EEE standard. - imx8qm: supports RGMII mode delayed clock. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28dt-bindings: net: fsl,fec: add RGMII internal clock delayJoakim Zhang
Add RGMII internal clock delay for FEC controller. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28dt-bindings: net: fsl,fec: update compatible itemsJoakim Zhang
Add more compatible items for i.MX8/8M platforms. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28tc-testing: Add control-plane selftest for skbmod SKBMOD_F_ECN optionPeilin Ye
Recently we added a new option, SKBMOD_F_ECN, to tc-skbmod(8). Add a control-plane selftest for it. Depends on kernel patch "net/sched: act_skbmod: Add SKBMOD_F_ECN option support", as well as iproute2 patch "tc/skbmod: Introduce SKBMOD_F_ECN option". Reviewed-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28net/sched: act_skbmod: Add SKBMOD_F_ECN option supportPeilin Ye
Currently, when doing rate limiting using the tc-police(8) action, the easiest way is to simply drop the packets which exceed or conform the configured bandwidth limit. Add a new option to tc-skbmod(8), so that users may use the ECN [1] extension to explicitly inform the receiver about the congestion instead of dropping packets "on the floor". The 2 least significant bits of the Traffic Class field in IPv4 and IPv6 headers are used to represent different ECN states [2]: 0b00: "Non ECN-Capable Transport", Non-ECT 0b10: "ECN Capable Transport", ECT(0) 0b01: "ECN Capable Transport", ECT(1) 0b11: "Congestion Encountered", CE As an example: $ tc filter add dev eth0 parent 1: protocol ip prio 10 \ matchall action skbmod ecn Doing the above marks all ECT(0) and ECT(1) packets as CE. It does NOT affect Non-ECT or non-IP packets. In the tc-police scenario mentioned above, users may pipe a tc-police action and a tc-skbmod "ecn" action together to achieve ECN-based rate limiting. For TCP connections, upon receiving a CE packet, the receiver will respond with an ECE packet, asking the sender to reduce their congestion window. However ECN also works with other L4 protocols e.g. DCCP and SCTP [2], and our implementation does not touch or care about L4 headers. The updated tc-skbmod SYNOPSIS looks like the following: tc ... action skbmod { set SETTABLE | swap SWAPPABLE | ecn } ... Only one of "set", "swap" or "ecn" shall be used in a single tc-skbmod command. Trying to use more than one of them at a time is considered undefined behavior; pipe multiple tc-skbmod commands together instead. "set" and "swap" only affect Ethernet packets, while "ecn" only affects IPv{4,6} packets. It is also worth mentioning that, in theory, the same effect could be achieved by piping a "police" action and a "bpf" action using the bpf_skb_ecn_set_ce() helper, but this requires eBPF programming from the user, thus impractical. Depends on patch "net/sched: act_skbmod: Skip non-Ethernet packets". [1] https://datatracker.ietf.org/doc/html/rfc3168 [2] https://en.wikipedia.org/wiki/Explicit_Congestion_Notification Reviewed-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28nfp: flower-ct: fix error return code in nfp_fl_ct_add_offload()Yang Yingliang
If nfp_tunnel_add_ipv6_off() fails, it should return error code in nfp_fl_ct_add_offload(). Fixes: 5a2b93041646 ("nfp: flower-ct: compile match sections of flow_payload") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28net: let flow have same hash in two directionszhang kai
using same source and destination ip/port for flow hash calculation within the two directions. Signed-off-by: zhang kai <zhangkaiheb@126.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28platform/x86: gigabyte-wmi: add support for B550 Aorus Elite V2Thomas Weißschuh
Reported as working here: https://github.com/t-8ch/linux-gigabyte-wmi-driver/issues/1#issuecomment-879398883 Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20210726153630.65213-1-linux@weissschuh.net Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-07-28platform/x86: intel-hid: add Alder Lake ACPI device IDPing Bao
Alder Lake has a new ACPI ID for Intel HID event filter device. Signed-off-by: Ping Bao <ping.a.bao@intel.com> Link: https://lore.kernel.org/r/20210721225615.20575-1-ping.a.bao@intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-07-28HID: wacom: Skip processing of touches with negative slot valuesJason Gerecke
The `input_mt_get_slot_by_key` function may return a negative value if an error occurs (e.g. running out of slots). If this occurs we should really avoid reporting any data for the slot. Signed-off-by: Ping Cheng <ping.cheng@wacom.com> Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-07-28HID: wacom: Re-enable touch by default for Cintiq 24HDT / 27QHDTJason Gerecke
Commit 670e90924bfe ("HID: wacom: support named keys on older devices") added support for sending named events from the soft buttons on the 24HDT and 27QHDT. In the process, however, it inadvertantly disabled the touchscreen of the 24HDT and 27QHDT by default. The `wacom_set_shared_values` function would normally enable touch by default but because it checks the state of the non-shared `has_mute_touch_switch` flag and `wacom_setup_touch_input_capabilities` sets the state of the /shared/ version, touch ends up being disabled by default. This patch sets the non-shared flag, letting `wacom_set_shared_values` take care of copying the value over to the shared version and setting the default touch state to "on". Fixes: 670e90924bfe ("HID: wacom: support named keys on older devices") CC: stable@vger.kernel.org # 5.4+ Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Ping Cheng <ping.cheng@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-07-28HID: Kconfig: Fix spelling mistake "Uninterruptable" -> "Uninterruptible"Colin Ian King
There is a spelling mistake in the Kconfig text. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-07-28HID: apple: Add support for Keychron K1 wireless keyboardHaochen Tong
The Keychron K1 wireless keyboard has a set of Apple-like function keys and an Fn key that works like on an Apple bluetooth keyboard. It identifies as an Apple Alu RevB ANSI keyboard (05ac:024f) over USB and BT. Use hid-apple for it so the Fn key and function keys work correctly. Signed-off-by: Haochen Tong <i@hexchain.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-07-28HID: fix typo in KconfigChristophe JAILLET
There is a missing space in "relyingon". Add it. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-07-28Merge branch 'devlink-register'David S. Miller
Leon Romanovsky says: ==================== Remove duplicated devlink registration check Changelog: v1: * Added two new patches that remove registration field from mlx5 and ti drivers. v0: https://lore.kernel.org/lkml/ed7bbb1e4c51dd58e6035a058e93d16f883b09ce.1627215829.git.leonro@nvidia.com -------------------------------------------------------------------- Both registered flag and devlink pointer are set at the same time and indicate the same thing - devlink/devlink_port are ready. Instead of checking ->registered use devlink pointer as an indication. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28devlink: Remove duplicated registration checkLeon Romanovsky
Both registered flag and devlink pointer are set at the same time and indicate the same thing - devlink/devlink_port are ready. Instead of checking ->registered use devlink pointer as an indication. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28net/mlx5: Don't rely on always true registered fieldLeon Romanovsky
Devlink is an integral part of mlx5 driver and all flows ensure that devlink_*_register() will success. That makes the ->registered check an obsolete. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28net: ti: am65-cpsw-nuss: fix wrong devlink release orderLeon Romanovsky
The commit that introduced devlink support released devlink resources in wrong order, that made an unwind flow to be asymmetrical. In addition, the am65-cpsw-nuss used internal to devlink core field - registered. In order to fix the unwind flow and remove such access to the registered field, rewrite the code to call devlink_port_unregister only on registered ports. Fixes: 58356eb31d60 ("net: ti: am65-cpsw-nuss: Add devlink support") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28nfc: nfcsim: fix use after free during module unloadKrzysztof Kozlowski
There is a use after free memory corruption during module exit: - nfcsim_exit() - nfcsim_device_free(dev0) - nfc_digital_unregister_device() This iterates over command queue and frees all commands, - dev->up = false - nfcsim_link_shutdown() - nfcsim_link_recv_wake() This wakes the sleeping thread nfcsim_link_recv_skb(). - nfcsim_link_recv_skb() Wake from wait_event_interruptible_timeout(), call directly the deb->cb callback even though (dev->up == false), - digital_send_cmd_complete() Dereference of "struct digital_cmd" cmd which was freed earlier by nfc_digital_unregister_device(). This causes memory corruption shortly after (with unrelated stack trace): nfc nfc0: NFC: nfcsim_recv_wq: Device is down llcp: nfc_llcp_recv: err -19 nfc nfc1: NFC: nfcsim_recv_wq: Device is down BUG: unable to handle page fault for address: ffffffffffffffed Call Trace: fsnotify+0x54b/0x5c0 __fsnotify_parent+0x1fe/0x300 ? vfs_write+0x27c/0x390 vfs_write+0x27c/0x390 ksys_write+0x63/0xe0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae KASAN report: BUG: KASAN: use-after-free in digital_send_cmd_complete+0x16/0x50 Write of size 8 at addr ffff88800a05f720 by task kworker/0:2/71 Workqueue: events nfcsim_recv_wq [nfcsim] Call Trace:  dump_stack_lvl+0x45/0x59  print_address_description.constprop.0+0x21/0x140  ? digital_send_cmd_complete+0x16/0x50  ? digital_send_cmd_complete+0x16/0x50  kasan_report.cold+0x7f/0x11b  ? digital_send_cmd_complete+0x16/0x50  ? digital_dep_link_down+0x60/0x60  digital_send_cmd_complete+0x16/0x50  nfcsim_recv_wq+0x38f/0x3d5 [nfcsim]  ? nfcsim_in_send_cmd+0x4a/0x4a [nfcsim]  ? lock_is_held_type+0x98/0x110  ? finish_wait+0x110/0x110  ? rcu_read_lock_sched_held+0x9c/0xd0  ? rcu_read_lock_bh_held+0xb0/0xb0  ? lockdep_hardirqs_on_prepare+0x12e/0x1f0 This flow of calling digital_send_cmd_complete() callback on driver exit is specific to nfcsim which implements reading and sending work queues. Since the NFC digital device was unregistered, the callback should not be called. Fixes: 204bddcb508f ("NFC: nfcsim: Make use of the Digital layer") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28tulip: windbond-840: Fix missing pci_disable_device() in probe and removeWang Hai
Replace pci_enable_device() with pcim_enable_device(), pci_disable_device() and pci_release_regions() will be called in release automatically. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28sctp: fix return value check in __sctp_rcv_asconf_lookupMarcelo Ricardo Leitner
As Ben Hutchings noticed, this check should have been inverted: the call returns true in case of success. Reported-by: Ben Hutchings <ben@decadent.org.uk> Fixes: 0c5dc070ff3d ("sctp: validate from_addr_param return") Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28nfc: s3fwrn5: fix undefined parameter values in dev_err()Tang Bin
In the function s3fwrn5_fw_download(), the 'ret' is not assigned, so the correct value should be given in dev_err function. Fixes: a0302ff5906a ("nfc: s3fwrn5: remove unnecessary label") Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28Merge tag 'mlx5-fixes-2021-07-27' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2021-07-27 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27block: delay freeing the gendiskChristoph Hellwig
blkdev_get_no_open acquires a reference to the block_device through the block device inode and then tries to acquire a device model reference to the gendisk. But at this point the disk migh already be freed (although the race is free). Fix this by only freeing the gendisk from the whole device bdevs ->free_inode callback as well. Fixes: 22ae8ce8b892 ("block: simplify bdev/disk lookup in blkdev_get") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20210722075402.983367-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-07-27blk-iocost: fix operation ordering in iocg_wake_fn()Tejun Heo
iocg_wake_fn() open-codes wait_queue_entry removal and wakeup because it wants the wq_entry to be always removed whether it ended up waking the task or not. finish_wait() tests whether wq_entry needs removal without grabbing the wait_queue lock and expects the waker to use list_del_init_careful() after all waking operations are complete, which iocg_wake_fn() didn't do. The operation order was wrong and the regular list_del_init() was used. The result is that if a waiter wakes up racing the waker, it can free pop the wq_entry off stack before the waker is still looking at it, which can lead to a backtrace like the following. [7312084.588951] general protection fault, probably for non-canonical address 0x586bf4005b2b88: 0000 [#1] SMP ... [7312084.647079] RIP: 0010:queued_spin_lock_slowpath+0x171/0x1b0 ... [7312084.858314] Call Trace: [7312084.863548] _raw_spin_lock_irqsave+0x22/0x30 [7312084.872605] try_to_wake_up+0x4c/0x4f0 [7312084.880444] iocg_wake_fn+0x71/0x80 [7312084.887763] __wake_up_common+0x71/0x140 [7312084.895951] iocg_kick_waitq+0xe8/0x2b0 [7312084.903964] ioc_rqos_throttle+0x275/0x650 [7312084.922423] __rq_qos_throttle+0x20/0x30 [7312084.930608] blk_mq_make_request+0x120/0x650 [7312084.939490] generic_make_request+0xca/0x310 [7312084.957600] submit_bio+0x173/0x200 [7312084.981806] swap_readpage+0x15c/0x240 [7312084.989646] read_swap_cache_async+0x58/0x60 [7312084.998527] swap_cluster_readahead+0x201/0x320 [7312085.023432] swapin_readahead+0x2df/0x450 [7312085.040672] do_swap_page+0x52f/0x820 [7312085.058259] handle_mm_fault+0xa16/0x1420 [7312085.066620] do_page_fault+0x2c6/0x5c0 [7312085.074459] page_fault+0x2f/0x40 Fix it by switching to list_del_init_careful() and putting it at the end. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Rik van Riel <riel@surriel.com> Fixes: 7caa47151ab2 ("blkcg: implement blk-iocost") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit (git 2.34.1) at 2025-09-11 21:03:23 +0000